WSL2-Linux-Kernel/drivers/power/da9030_battery.c

592 строки
16 KiB
C
Исходник Обычный вид История

/*
* Battery charger driver for Dialog Semiconductor DA9030
*
* Copyright (C) 2008 Compulab, Ltd.
* Mike Rapoport <mike@compulab.co.il>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 11:04:11 +03:00
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/device.h>
#include <linux/workqueue.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/mfd/da903x.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/notifier.h>
#define DA9030_FAULT_LOG 0x0a
#define DA9030_FAULT_LOG_OVER_TEMP (1 << 7)
#define DA9030_FAULT_LOG_VBAT_OVER (1 << 4)
#define DA9030_CHARGE_CONTROL 0x28
#define DA9030_CHRG_CHARGER_ENABLE (1 << 7)
#define DA9030_ADC_MAN_CONTROL 0x30
#define DA9030_ADC_TBATREF_ENABLE (1 << 5)
#define DA9030_ADC_LDO_INT_ENABLE (1 << 4)
#define DA9030_ADC_AUTO_CONTROL 0x31
#define DA9030_ADC_TBAT_ENABLE (1 << 5)
#define DA9030_ADC_VBAT_IN_TXON (1 << 4)
#define DA9030_ADC_VCH_ENABLE (1 << 3)
#define DA9030_ADC_ICH_ENABLE (1 << 2)
#define DA9030_ADC_VBAT_ENABLE (1 << 1)
#define DA9030_ADC_AUTO_SLEEP_ENABLE (1 << 0)
#define DA9030_VBATMON 0x32
#define DA9030_VBATMONTXON 0x33
#define DA9030_TBATHIGHP 0x34
#define DA9030_TBATHIGHN 0x35
#define DA9030_TBATLOW 0x36
#define DA9030_VBAT_RES 0x41
#define DA9030_VBATMIN_RES 0x42
#define DA9030_VBATMINTXON_RES 0x43
#define DA9030_ICHMAX_RES 0x44
#define DA9030_ICHMIN_RES 0x45
#define DA9030_ICHAVERAGE_RES 0x46
#define DA9030_VCHMAX_RES 0x47
#define DA9030_VCHMIN_RES 0x48
#define DA9030_TBAT_RES 0x49
struct da9030_adc_res {
uint8_t vbat_res;
uint8_t vbatmin_res;
uint8_t vbatmintxon;
uint8_t ichmax_res;
uint8_t ichmin_res;
uint8_t ichaverage_res;
uint8_t vchmax_res;
uint8_t vchmin_res;
uint8_t tbat_res;
uint8_t adc_in4_res;
uint8_t adc_in5_res;
};
struct da9030_battery_thresholds {
int tbat_low;
int tbat_high;
int tbat_restart;
int vbat_low;
int vbat_crit;
int vbat_charge_start;
int vbat_charge_stop;
int vbat_charge_restart;
int vcharge_min;
int vcharge_max;
};
struct da9030_charger {
struct power_supply psy;
struct device *master;
struct da9030_adc_res adc;
struct delayed_work work;
unsigned int interval;
struct power_supply_info *battery_info;
struct da9030_battery_thresholds thresholds;
unsigned int charge_milliamp;
unsigned int charge_millivolt;
/* charger status */
bool chdet;
uint8_t fault;
int mA;
int mV;
bool is_on;
struct notifier_block nb;
/* platform callbacks for battery low and critical events */
void (*battery_low)(void);
void (*battery_critical)(void);
struct dentry *debug_file;
};
static inline int da9030_reg_to_mV(int reg)
{
return ((reg * 2650) >> 8) + 2650;
}
static inline int da9030_millivolt_to_reg(int mV)
{
return ((mV - 2650) << 8) / 2650;
}
static inline int da9030_reg_to_mA(int reg)
{
return ((reg * 24000) >> 8) / 15;
}
#ifdef CONFIG_DEBUG_FS
static int bat_debug_show(struct seq_file *s, void *data)
{
struct da9030_charger *charger = s->private;
seq_printf(s, "charger is %s\n", charger->is_on ? "on" : "off");
if (charger->chdet) {
seq_printf(s, "iset = %dmA, vset = %dmV\n",
charger->mA, charger->mV);
}
seq_printf(s, "vbat_res = %d (%dmV)\n",
charger->adc.vbat_res,
da9030_reg_to_mV(charger->adc.vbat_res));
seq_printf(s, "vbatmin_res = %d (%dmV)\n",
charger->adc.vbatmin_res,
da9030_reg_to_mV(charger->adc.vbatmin_res));
seq_printf(s, "vbatmintxon = %d (%dmV)\n",
charger->adc.vbatmintxon,
da9030_reg_to_mV(charger->adc.vbatmintxon));
seq_printf(s, "ichmax_res = %d (%dmA)\n",
charger->adc.ichmax_res,
da9030_reg_to_mV(charger->adc.ichmax_res));
seq_printf(s, "ichmin_res = %d (%dmA)\n",
charger->adc.ichmin_res,
da9030_reg_to_mA(charger->adc.ichmin_res));
seq_printf(s, "ichaverage_res = %d (%dmA)\n",
charger->adc.ichaverage_res,
da9030_reg_to_mA(charger->adc.ichaverage_res));
seq_printf(s, "vchmax_res = %d (%dmV)\n",
charger->adc.vchmax_res,
da9030_reg_to_mA(charger->adc.vchmax_res));
seq_printf(s, "vchmin_res = %d (%dmV)\n",
charger->adc.vchmin_res,
da9030_reg_to_mV(charger->adc.vchmin_res));
return 0;
}
static int debug_open(struct inode *inode, struct file *file)
{
return single_open(file, bat_debug_show, inode->i_private);
}
static const struct file_operations bat_debug_fops = {
.open = debug_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static struct dentry *da9030_bat_create_debugfs(struct da9030_charger *charger)
{
charger->debug_file = debugfs_create_file("charger", 0666, NULL,
charger, &bat_debug_fops);
return charger->debug_file;
}
static void da9030_bat_remove_debugfs(struct da9030_charger *charger)
{
debugfs_remove(charger->debug_file);
}
#else
static inline struct dentry *da9030_bat_create_debugfs(struct da9030_charger *charger)
{
return NULL;
}
static inline void da9030_bat_remove_debugfs(struct da9030_charger *charger)
{
}
#endif
static inline void da9030_read_adc(struct da9030_charger *charger,
struct da9030_adc_res *adc)
{
da903x_reads(charger->master, DA9030_VBAT_RES,
sizeof(*adc), (uint8_t *)adc);
}
static void da9030_charger_update_state(struct da9030_charger *charger)
{
uint8_t val;
da903x_read(charger->master, DA9030_CHARGE_CONTROL, &val);
charger->is_on = (val & DA9030_CHRG_CHARGER_ENABLE) ? 1 : 0;
charger->mA = ((val >> 3) & 0xf) * 100;
charger->mV = (val & 0x7) * 50 + 4000;
da9030_read_adc(charger, &charger->adc);
da903x_read(charger->master, DA9030_FAULT_LOG, &charger->fault);
charger->chdet = da903x_query_status(charger->master,
DA9030_STATUS_CHDET);
}
static void da9030_set_charge(struct da9030_charger *charger, int on)
{
uint8_t val;
if (on) {
val = DA9030_CHRG_CHARGER_ENABLE;
val |= (charger->charge_milliamp / 100) << 3;
val |= (charger->charge_millivolt - 4000) / 50;
charger->is_on = 1;
} else {
val = 0;
charger->is_on = 0;
}
da903x_write(charger->master, DA9030_CHARGE_CONTROL, val);
power_supply_changed(&charger->psy);
}
static void da9030_charger_check_state(struct da9030_charger *charger)
{
da9030_charger_update_state(charger);
/* we wake or boot with external power on */
if (!charger->is_on) {
if ((charger->chdet) &&
(charger->adc.vbat_res <
charger->thresholds.vbat_charge_start)) {
da9030_set_charge(charger, 1);
}
} else {
/* Charger has been pulled out */
if (!charger->chdet) {
da9030_set_charge(charger, 0);
return;
}
if (charger->adc.vbat_res >=
charger->thresholds.vbat_charge_stop) {
da9030_set_charge(charger, 0);
da903x_write(charger->master, DA9030_VBATMON,
charger->thresholds.vbat_charge_restart);
} else if (charger->adc.vbat_res >
charger->thresholds.vbat_low) {
/* we are charging and passed LOW_THRESH,
so upate DA9030 VBAT threshold
*/
da903x_write(charger->master, DA9030_VBATMON,
charger->thresholds.vbat_low);
}
if (charger->adc.vchmax_res > charger->thresholds.vcharge_max ||
charger->adc.vchmin_res < charger->thresholds.vcharge_min ||
/* Tempreture readings are negative */
charger->adc.tbat_res < charger->thresholds.tbat_high ||
charger->adc.tbat_res > charger->thresholds.tbat_low) {
/* disable charger */
da9030_set_charge(charger, 0);
}
}
}
static void da9030_charging_monitor(struct work_struct *work)
{
struct da9030_charger *charger;
charger = container_of(work, struct da9030_charger, work.work);
da9030_charger_check_state(charger);
/* reschedule for the next time */
schedule_delayed_work(&charger->work, charger->interval);
}
static enum power_supply_property da9030_battery_props[] = {
POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_TECHNOLOGY,
POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_CURRENT_AVG,
};
static void da9030_battery_check_status(struct da9030_charger *charger,
union power_supply_propval *val)
{
if (charger->chdet) {
if (charger->is_on)
val->intval = POWER_SUPPLY_STATUS_CHARGING;
else
val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
} else {
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
}
}
static void da9030_battery_check_health(struct da9030_charger *charger,
union power_supply_propval *val)
{
if (charger->fault & DA9030_FAULT_LOG_OVER_TEMP)
val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
else if (charger->fault & DA9030_FAULT_LOG_VBAT_OVER)
val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
else
val->intval = POWER_SUPPLY_HEALTH_GOOD;
}
static int da9030_battery_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
struct da9030_charger *charger;
charger = container_of(psy, struct da9030_charger, psy);
switch (psp) {
case POWER_SUPPLY_PROP_STATUS:
da9030_battery_check_status(charger, val);
break;
case POWER_SUPPLY_PROP_HEALTH:
da9030_battery_check_health(charger, val);
break;
case POWER_SUPPLY_PROP_TECHNOLOGY:
val->intval = charger->battery_info->technology;
break;
case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
val->intval = charger->battery_info->voltage_max_design;
break;
case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
val->intval = charger->battery_info->voltage_min_design;
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
val->intval = da9030_reg_to_mV(charger->adc.vbat_res) * 1000;
break;
case POWER_SUPPLY_PROP_CURRENT_AVG:
val->intval =
da9030_reg_to_mA(charger->adc.ichaverage_res) * 1000;
break;
case POWER_SUPPLY_PROP_MODEL_NAME:
val->strval = charger->battery_info->name;
break;
default:
break;
}
return 0;
}
static void da9030_battery_vbat_event(struct da9030_charger *charger)
{
da9030_read_adc(charger, &charger->adc);
if (charger->is_on)
return;
if (charger->adc.vbat_res < charger->thresholds.vbat_low) {
/* set VBAT threshold for critical */
da903x_write(charger->master, DA9030_VBATMON,
charger->thresholds.vbat_crit);
if (charger->battery_low)
charger->battery_low();
} else if (charger->adc.vbat_res <
charger->thresholds.vbat_crit) {
/* notify the system of battery critical */
if (charger->battery_critical)
charger->battery_critical();
}
}
static int da9030_battery_event(struct notifier_block *nb, unsigned long event,
void *data)
{
struct da9030_charger *charger =
container_of(nb, struct da9030_charger, nb);
switch (event) {
case DA9030_EVENT_CHDET:
cancel_delayed_work_sync(&charger->work);
schedule_work(&charger->work.work);
break;
case DA9030_EVENT_VBATMON:
da9030_battery_vbat_event(charger);
break;
case DA9030_EVENT_CHIOVER:
case DA9030_EVENT_TBAT:
da9030_set_charge(charger, 0);
break;
}
return 0;
}
static void da9030_battery_convert_thresholds(struct da9030_charger *charger,
struct da9030_battery_info *pdata)
{
charger->thresholds.tbat_low = pdata->tbat_low;
charger->thresholds.tbat_high = pdata->tbat_high;
charger->thresholds.tbat_restart = pdata->tbat_restart;
charger->thresholds.vbat_low =
da9030_millivolt_to_reg(pdata->vbat_low);
charger->thresholds.vbat_crit =
da9030_millivolt_to_reg(pdata->vbat_crit);
charger->thresholds.vbat_charge_start =
da9030_millivolt_to_reg(pdata->vbat_charge_start);
charger->thresholds.vbat_charge_stop =
da9030_millivolt_to_reg(pdata->vbat_charge_stop);
charger->thresholds.vbat_charge_restart =
da9030_millivolt_to_reg(pdata->vbat_charge_restart);
charger->thresholds.vcharge_min =
da9030_millivolt_to_reg(pdata->vcharge_min);
charger->thresholds.vcharge_max =
da9030_millivolt_to_reg(pdata->vcharge_max);
}
static void da9030_battery_setup_psy(struct da9030_charger *charger)
{
struct power_supply *psy = &charger->psy;
struct power_supply_info *info = charger->battery_info;
psy->name = info->name;
psy->use_for_apm = info->use_for_apm;
psy->type = POWER_SUPPLY_TYPE_BATTERY;
psy->get_property = da9030_battery_get_property;
psy->properties = da9030_battery_props;
psy->num_properties = ARRAY_SIZE(da9030_battery_props);
};
static int da9030_battery_charger_init(struct da9030_charger *charger)
{
char v[5];
int ret;
v[0] = v[1] = charger->thresholds.vbat_low;
v[2] = charger->thresholds.tbat_high;
v[3] = charger->thresholds.tbat_restart;
v[4] = charger->thresholds.tbat_low;
ret = da903x_writes(charger->master, DA9030_VBATMON, 5, v);
if (ret)
return ret;
/*
* Enable reference voltage supply for ADC from the LDO_INTERNAL
* regulator. Must be set before ADC measurements can be made.
*/
ret = da903x_write(charger->master, DA9030_ADC_MAN_CONTROL,
DA9030_ADC_LDO_INT_ENABLE |
DA9030_ADC_TBATREF_ENABLE);
if (ret)
return ret;
/* enable auto ADC measuremnts */
return da903x_write(charger->master, DA9030_ADC_AUTO_CONTROL,
DA9030_ADC_TBAT_ENABLE | DA9030_ADC_VBAT_IN_TXON |
DA9030_ADC_VCH_ENABLE | DA9030_ADC_ICH_ENABLE |
DA9030_ADC_VBAT_ENABLE |
DA9030_ADC_AUTO_SLEEP_ENABLE);
}
static int da9030_battery_probe(struct platform_device *pdev)
{
struct da9030_charger *charger;
struct da9030_battery_info *pdata = pdev->dev.platform_data;
int ret;
if (pdata == NULL)
return -EINVAL;
if (pdata->charge_milliamp >= 1500 ||
pdata->charge_millivolt < 4000 ||
pdata->charge_millivolt > 4350)
return -EINVAL;
charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL);
if (charger == NULL)
return -ENOMEM;
charger->master = pdev->dev.parent;
/* 10 seconds between monitor runs unless platform defines other
interval */
charger->interval = msecs_to_jiffies(
(pdata->batmon_interval ? : 10) * 1000);
charger->charge_milliamp = pdata->charge_milliamp;
charger->charge_millivolt = pdata->charge_millivolt;
charger->battery_info = pdata->battery_info;
charger->battery_low = pdata->battery_low;
charger->battery_critical = pdata->battery_critical;
da9030_battery_convert_thresholds(charger, pdata);
ret = da9030_battery_charger_init(charger);
if (ret)
goto err_charger_init;
INIT_DELAYED_WORK(&charger->work, da9030_charging_monitor);
schedule_delayed_work(&charger->work, charger->interval);
charger->nb.notifier_call = da9030_battery_event;
ret = da903x_register_notifier(charger->master, &charger->nb,
DA9030_EVENT_CHDET |
DA9030_EVENT_VBATMON |
DA9030_EVENT_CHIOVER |
DA9030_EVENT_TBAT);
if (ret)
goto err_notifier;
da9030_battery_setup_psy(charger);
ret = power_supply_register(&pdev->dev, &charger->psy);
if (ret)
goto err_ps_register;
charger->debug_file = da9030_bat_create_debugfs(charger);
platform_set_drvdata(pdev, charger);
return 0;
err_ps_register:
da903x_unregister_notifier(charger->master, &charger->nb,
DA9030_EVENT_CHDET | DA9030_EVENT_VBATMON |
DA9030_EVENT_CHIOVER | DA9030_EVENT_TBAT);
err_notifier:
cancel_delayed_work(&charger->work);
err_charger_init:
return ret;
}
static int da9030_battery_remove(struct platform_device *dev)
{
struct da9030_charger *charger = platform_get_drvdata(dev);
da9030_bat_remove_debugfs(charger);
da903x_unregister_notifier(charger->master, &charger->nb,
DA9030_EVENT_CHDET | DA9030_EVENT_VBATMON |
DA9030_EVENT_CHIOVER | DA9030_EVENT_TBAT);
cancel_delayed_work_sync(&charger->work);
da9030_set_charge(charger, 0);
power_supply_unregister(&charger->psy);
return 0;
}
static struct platform_driver da903x_battery_driver = {
.driver = {
.name = "da903x-battery",
},
.probe = da9030_battery_probe,
.remove = da9030_battery_remove,
};
module_platform_driver(da903x_battery_driver);
MODULE_DESCRIPTION("DA9030 battery charger driver");
MODULE_AUTHOR("Mike Rapoport, CompuLab");
MODULE_LICENSE("GPL");