microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/arch/arm/boot/dts/imx6q.dtsi

314 строки
8.5 KiB
Plaintext
Исходник Обычный вид История

ARM: dts: add dtsi for imx6q and imx6dl Add dtsi for imx6q and imx6dl with non-common blocks moved into there. Major differences between imx6dl and imx6q: * Dual vs. Quad cores * single vs. dual IPU * 128 vs. 256 KB OCRAM * imx6q: ECSPI5, OpenVG (GC355), SATA * imx6dl: I2C4, PXP, EPDC, LCDIF * iomuxc/pads definition Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-04 19:09:16 +04:00
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
ARM: imx: use #include for all device trees Replace /include/ (dtc) with #include (C pre-processor) for all imx DT files, so that gcc -E handles the entire include tree, and hence any of those files can #include some other file e.g. for constant definitions. This allows future use of #defines and header files in order to define names for various constants, such as pinctrl settings. Use of those features will increase the readability of the device tree files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-04-07 06:49:34 +04:00
#include "imx6qdl.dtsi"
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 06:32:52 +04:00
#include "imx6q-pinfunc.h"
ARM: dts: add dtsi for imx6q and imx6dl Add dtsi for imx6q and imx6dl with non-common blocks moved into there. Major differences between imx6dl and imx6q: * Dual vs. Quad cores * single vs. dual IPU * 128 vs. 256 KB OCRAM * imx6q: ECSPI5, OpenVG (GC355), SATA * imx6dl: I2C4, PXP, EPDC, LCDIF * iomuxc/pads definition Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-04 19:09:16 +04:00
/ {
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a9";
reg = <0>;
next-level-cache = <&L2>;
operating-points = <
/* kHz uV */
1200000 1275000
996000 1250000
792000 1150000
396000 950000
>;
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clks 104>, <&clks 6>, <&clks 16>,
<&clks 17>, <&clks 170>;
clock-names = "arm", "pll2_pfd2_396m", "step",
"pll1_sw", "pll1_sys";
arm-supply = <&reg_arm>;
pu-supply = <&reg_pu>;
soc-supply = <&reg_soc>;
};
cpu@1 {
compatible = "arm,cortex-a9";
reg = <1>;
next-level-cache = <&L2>;
};
cpu@2 {
compatible = "arm,cortex-a9";
reg = <2>;
next-level-cache = <&L2>;
};
cpu@3 {
compatible = "arm,cortex-a9";
reg = <3>;
next-level-cache = <&L2>;
};
};
soc {
aips-bus@02000000 { /* AIPS1 */
spba-bus@02000000 {
ecspi5: ecspi@02018000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02018000 0x4000>;
interrupts = <0 35 0x04>;
clocks = <&clks 116>, <&clks 116>;
clock-names = "ipg", "per";
status = "disabled";
};
};
iomuxc: iomuxc@020e0000 {
compatible = "fsl,imx6q-iomuxc";
reg = <0x020e0000 0x4000>;
/* shared pinctrl settings */
audmux {
pinctrl_audmux_1: audmux-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 06:32:52 +04:00
MX6Q_PAD_SD2_DAT0__AUD4_RXD 0x80000000
MX6Q_PAD_SD2_DAT3__AUD4_TXC 0x80000000
MX6Q_PAD_SD2_DAT2__AUD4_TXD 0x80000000
MX6Q_PAD_SD2_DAT1__AUD4_TXFS 0x80000000
ARM: dts: add dtsi for imx6q and imx6dl Add dtsi for imx6q and imx6dl with non-common blocks moved into there. Major differences between imx6dl and imx6q: * Dual vs. Quad cores * single vs. dual IPU * 128 vs. 256 KB OCRAM * imx6q: ECSPI5, OpenVG (GC355), SATA * imx6dl: I2C4, PXP, EPDC, LCDIF * iomuxc/pads definition Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-04 19:09:16 +04:00
>;
};
};
ecspi1 {
pinctrl_ecspi1_1: ecspi1grp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 06:32:52 +04:00
MX6Q_PAD_EIM_D17__ECSPI1_MISO 0x100b1
MX6Q_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
MX6Q_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
ARM: dts: add dtsi for imx6q and imx6dl Add dtsi for imx6q and imx6dl with non-common blocks moved into there. Major differences between imx6dl and imx6q: * Dual vs. Quad cores * single vs. dual IPU * 128 vs. 256 KB OCRAM * imx6q: ECSPI5, OpenVG (GC355), SATA * imx6dl: I2C4, PXP, EPDC, LCDIF * iomuxc/pads definition Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-04 19:09:16 +04:00
>;
};
};
ARM: dts: imx6q: Add pinctrl for ecspi3 Add a group of pins to allow ecspi3 to be used on imx6q. Signed-off-by: Sean Cross <xobs@kosagi.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-07 10:00:08 +04:00
ecspi3 {
pinctrl_ecspi3_1: ecspi3grp-1 {
fsl,pins = <
MX6Q_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
MX6Q_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
MX6Q_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
>;
};
};
ARM: dts: add dtsi for imx6q and imx6dl Add dtsi for imx6q and imx6dl with non-common blocks moved into there. Major differences between imx6dl and imx6q: * Dual vs. Quad cores * single vs. dual IPU * 128 vs. 256 KB OCRAM * imx6q: ECSPI5, OpenVG (GC355), SATA * imx6dl: I2C4, PXP, EPDC, LCDIF * iomuxc/pads definition Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-04 19:09:16 +04:00
enet {
pinctrl_enet_1: enetgrp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 06:32:52 +04:00
MX6Q_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
MX6Q_PAD_ENET_MDC__ENET_MDC 0x1b0b0
MX6Q_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
MX6Q_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
MX6Q_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
MX6Q_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
MX6Q_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
MX6Q_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
MX6Q_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
MX6Q_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
MX6Q_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
MX6Q_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
MX6Q_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
ARM: dts: add dtsi for imx6q and imx6dl Add dtsi for imx6q and imx6dl with non-common blocks moved into there. Major differences between imx6dl and imx6q: * Dual vs. Quad cores * single vs. dual IPU * 128 vs. 256 KB OCRAM * imx6q: ECSPI5, OpenVG (GC355), SATA * imx6dl: I2C4, PXP, EPDC, LCDIF * iomuxc/pads definition Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-04 19:09:16 +04:00
>;
};
pinctrl_enet_2: enetgrp-2 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 06:32:52 +04:00
MX6Q_PAD_KEY_COL1__ENET_MDIO 0x1b0b0
MX6Q_PAD_KEY_COL2__ENET_MDC 0x1b0b0
MX6Q_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
MX6Q_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
MX6Q_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
MX6Q_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
MX6Q_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
MX6Q_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
MX6Q_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
MX6Q_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
MX6Q_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
MX6Q_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
ARM: dts: add dtsi for imx6q and imx6dl Add dtsi for imx6q and imx6dl with non-common blocks moved into there. Major differences between imx6dl and imx6q: * Dual vs. Quad cores * single vs. dual IPU * 128 vs. 256 KB OCRAM * imx6q: ECSPI5, OpenVG (GC355), SATA * imx6dl: I2C4, PXP, EPDC, LCDIF * iomuxc/pads definition Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-04 19:09:16 +04:00
>;
};
};
gpmi-nand {
pinctrl_gpmi_nand_1: gpmi-nand-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 06:32:52 +04:00
MX6Q_PAD_NANDF_CLE__NAND_CLE 0xb0b1
MX6Q_PAD_NANDF_ALE__NAND_ALE 0xb0b1
MX6Q_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
MX6Q_PAD_NANDF_RB0__NAND_READY_B 0xb000
MX6Q_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
MX6Q_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
MX6Q_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1
MX6Q_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1
MX6Q_PAD_SD4_CMD__NAND_RE_B 0xb0b1
MX6Q_PAD_SD4_CLK__NAND_WE_B 0xb0b1
MX6Q_PAD_NANDF_D0__NAND_DATA00 0xb0b1
MX6Q_PAD_NANDF_D1__NAND_DATA01 0xb0b1
MX6Q_PAD_NANDF_D2__NAND_DATA02 0xb0b1
MX6Q_PAD_NANDF_D3__NAND_DATA03 0xb0b1
MX6Q_PAD_NANDF_D4__NAND_DATA04 0xb0b1
MX6Q_PAD_NANDF_D5__NAND_DATA05 0xb0b1
MX6Q_PAD_NANDF_D6__NAND_DATA06 0xb0b1
MX6Q_PAD_NANDF_D7__NAND_DATA07 0xb0b1
MX6Q_PAD_SD4_DAT0__NAND_DQS 0x00b1
ARM: dts: add dtsi for imx6q and imx6dl Add dtsi for imx6q and imx6dl with non-common blocks moved into there. Major differences between imx6dl and imx6q: * Dual vs. Quad cores * single vs. dual IPU * 128 vs. 256 KB OCRAM * imx6q: ECSPI5, OpenVG (GC355), SATA * imx6dl: I2C4, PXP, EPDC, LCDIF * iomuxc/pads definition Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-04 19:09:16 +04:00
>;
};
};
i2c1 {
pinctrl_i2c1_1: i2c1grp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 06:32:52 +04:00
MX6Q_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6Q_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
ARM: dts: add dtsi for imx6q and imx6dl Add dtsi for imx6q and imx6dl with non-common blocks moved into there. Major differences between imx6dl and imx6q: * Dual vs. Quad cores * single vs. dual IPU * 128 vs. 256 KB OCRAM * imx6q: ECSPI5, OpenVG (GC355), SATA * imx6dl: I2C4, PXP, EPDC, LCDIF * iomuxc/pads definition Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-04 19:09:16 +04:00
>;
};
};
uart1 {
pinctrl_uart1_1: uart1grp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 06:32:52 +04:00
MX6Q_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
ARM: dts: add dtsi for imx6q and imx6dl Add dtsi for imx6q and imx6dl with non-common blocks moved into there. Major differences between imx6dl and imx6q: * Dual vs. Quad cores * single vs. dual IPU * 128 vs. 256 KB OCRAM * imx6q: ECSPI5, OpenVG (GC355), SATA * imx6dl: I2C4, PXP, EPDC, LCDIF * iomuxc/pads definition Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-04 19:09:16 +04:00
>;
};
};
uart2 {
pinctrl_uart2_1: uart2grp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 06:32:52 +04:00
MX6Q_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
ARM: dts: add dtsi for imx6q and imx6dl Add dtsi for imx6q and imx6dl with non-common blocks moved into there. Major differences between imx6dl and imx6q: * Dual vs. Quad cores * single vs. dual IPU * 128 vs. 256 KB OCRAM * imx6q: ECSPI5, OpenVG (GC355), SATA * imx6dl: I2C4, PXP, EPDC, LCDIF * iomuxc/pads definition Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-04 19:09:16 +04:00
>;
};
};
uart4 {
pinctrl_uart4_1: uart4grp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 06:32:52 +04:00
MX6Q_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
MX6Q_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
ARM: dts: add dtsi for imx6q and imx6dl Add dtsi for imx6q and imx6dl with non-common blocks moved into there. Major differences between imx6dl and imx6q: * Dual vs. Quad cores * single vs. dual IPU * 128 vs. 256 KB OCRAM * imx6q: ECSPI5, OpenVG (GC355), SATA * imx6dl: I2C4, PXP, EPDC, LCDIF * iomuxc/pads definition Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-04 19:09:16 +04:00
>;
};
};
usbotg {
pinctrl_usbotg_1: usbotggrp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 06:32:52 +04:00
MX6Q_PAD_GPIO_1__USB_OTG_ID 0x17059
ARM: dts: add dtsi for imx6q and imx6dl Add dtsi for imx6q and imx6dl with non-common blocks moved into there. Major differences between imx6dl and imx6q: * Dual vs. Quad cores * single vs. dual IPU * 128 vs. 256 KB OCRAM * imx6q: ECSPI5, OpenVG (GC355), SATA * imx6dl: I2C4, PXP, EPDC, LCDIF * iomuxc/pads definition Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-04 19:09:16 +04:00
>;
};
ARM: dts: imx6q-sabresd: Add USB support Add USB support for imx6q sabresd board Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-18 06:06:44 +04:00
pinctrl_usbotg_2: usbotggrp-2 {
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 06:32:52 +04:00
fsl,pins = <
MX6Q_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
ARM: dts: imx6q-sabresd: Add USB support Add USB support for imx6q sabresd board Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-18 06:06:44 +04:00
>;
};
ARM: dts: add dtsi for imx6q and imx6dl Add dtsi for imx6q and imx6dl with non-common blocks moved into there. Major differences between imx6dl and imx6q: * Dual vs. Quad cores * single vs. dual IPU * 128 vs. 256 KB OCRAM * imx6q: ECSPI5, OpenVG (GC355), SATA * imx6dl: I2C4, PXP, EPDC, LCDIF * iomuxc/pads definition Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-04 19:09:16 +04:00
};
usdhc2 {
pinctrl_usdhc2_1: usdhc2grp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 06:32:52 +04:00
MX6Q_PAD_SD2_CMD__SD2_CMD 0x17059
MX6Q_PAD_SD2_CLK__SD2_CLK 0x10059
MX6Q_PAD_SD2_DAT0__SD2_DATA0 0x17059
MX6Q_PAD_SD2_DAT1__SD2_DATA1 0x17059
MX6Q_PAD_SD2_DAT2__SD2_DATA2 0x17059
MX6Q_PAD_SD2_DAT3__SD2_DATA3 0x17059
MX6Q_PAD_NANDF_D4__SD2_DATA4 0x17059
MX6Q_PAD_NANDF_D5__SD2_DATA5 0x17059
MX6Q_PAD_NANDF_D6__SD2_DATA6 0x17059
MX6Q_PAD_NANDF_D7__SD2_DATA7 0x17059
ARM: dts: add dtsi for imx6q and imx6dl Add dtsi for imx6q and imx6dl with non-common blocks moved into there. Major differences between imx6dl and imx6q: * Dual vs. Quad cores * single vs. dual IPU * 128 vs. 256 KB OCRAM * imx6q: ECSPI5, OpenVG (GC355), SATA * imx6dl: I2C4, PXP, EPDC, LCDIF * iomuxc/pads definition Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-04 19:09:16 +04:00
>;
};
};
usdhc3 {
pinctrl_usdhc3_1: usdhc3grp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 06:32:52 +04:00
MX6Q_PAD_SD3_CMD__SD3_CMD 0x17059
MX6Q_PAD_SD3_CLK__SD3_CLK 0x10059
MX6Q_PAD_SD3_DAT0__SD3_DATA0 0x17059
MX6Q_PAD_SD3_DAT1__SD3_DATA1 0x17059
MX6Q_PAD_SD3_DAT2__SD3_DATA2 0x17059
MX6Q_PAD_SD3_DAT3__SD3_DATA3 0x17059
MX6Q_PAD_SD3_DAT4__SD3_DATA4 0x17059
MX6Q_PAD_SD3_DAT5__SD3_DATA5 0x17059
MX6Q_PAD_SD3_DAT6__SD3_DATA6 0x17059
MX6Q_PAD_SD3_DAT7__SD3_DATA7 0x17059
ARM: dts: add dtsi for imx6q and imx6dl Add dtsi for imx6q and imx6dl with non-common blocks moved into there. Major differences between imx6dl and imx6q: * Dual vs. Quad cores * single vs. dual IPU * 128 vs. 256 KB OCRAM * imx6q: ECSPI5, OpenVG (GC355), SATA * imx6dl: I2C4, PXP, EPDC, LCDIF * iomuxc/pads definition Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-04 19:09:16 +04:00
>;
};
pinctrl_usdhc3_2: usdhc3grp-2 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 06:32:52 +04:00
MX6Q_PAD_SD3_CMD__SD3_CMD 0x17059
MX6Q_PAD_SD3_CLK__SD3_CLK 0x10059
MX6Q_PAD_SD3_DAT0__SD3_DATA0 0x17059
MX6Q_PAD_SD3_DAT1__SD3_DATA1 0x17059
MX6Q_PAD_SD3_DAT2__SD3_DATA2 0x17059
MX6Q_PAD_SD3_DAT3__SD3_DATA3 0x17059
ARM: dts: add dtsi for imx6q and imx6dl Add dtsi for imx6q and imx6dl with non-common blocks moved into there. Major differences between imx6dl and imx6q: * Dual vs. Quad cores * single vs. dual IPU * 128 vs. 256 KB OCRAM * imx6q: ECSPI5, OpenVG (GC355), SATA * imx6dl: I2C4, PXP, EPDC, LCDIF * iomuxc/pads definition Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-04 19:09:16 +04:00
>;
};
};
usdhc4 {
pinctrl_usdhc4_1: usdhc4grp-1 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 06:32:52 +04:00
MX6Q_PAD_SD4_CMD__SD4_CMD 0x17059
MX6Q_PAD_SD4_CLK__SD4_CLK 0x10059
MX6Q_PAD_SD4_DAT0__SD4_DATA0 0x17059
MX6Q_PAD_SD4_DAT1__SD4_DATA1 0x17059
MX6Q_PAD_SD4_DAT2__SD4_DATA2 0x17059
MX6Q_PAD_SD4_DAT3__SD4_DATA3 0x17059
MX6Q_PAD_SD4_DAT4__SD4_DATA4 0x17059
MX6Q_PAD_SD4_DAT5__SD4_DATA5 0x17059
MX6Q_PAD_SD4_DAT6__SD4_DATA6 0x17059
MX6Q_PAD_SD4_DAT7__SD4_DATA7 0x17059
ARM: dts: add dtsi for imx6q and imx6dl Add dtsi for imx6q and imx6dl with non-common blocks moved into there. Major differences between imx6dl and imx6q: * Dual vs. Quad cores * single vs. dual IPU * 128 vs. 256 KB OCRAM * imx6q: ECSPI5, OpenVG (GC355), SATA * imx6dl: I2C4, PXP, EPDC, LCDIF * iomuxc/pads definition Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-04 19:09:16 +04:00
>;
};
pinctrl_usdhc4_2: usdhc4grp-2 {
fsl,pins = <
pinctrl: imx: move hard-coding data into device tree Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-20 06:32:52 +04:00
MX6Q_PAD_SD4_CMD__SD4_CMD 0x17059
MX6Q_PAD_SD4_CLK__SD4_CLK 0x10059
MX6Q_PAD_SD4_DAT0__SD4_DATA0 0x17059
MX6Q_PAD_SD4_DAT1__SD4_DATA1 0x17059
MX6Q_PAD_SD4_DAT2__SD4_DATA2 0x17059
MX6Q_PAD_SD4_DAT3__SD4_DATA3 0x17059
ARM: dts: add dtsi for imx6q and imx6dl Add dtsi for imx6q and imx6dl with non-common blocks moved into there. Major differences between imx6dl and imx6q: * Dual vs. Quad cores * single vs. dual IPU * 128 vs. 256 KB OCRAM * imx6q: ECSPI5, OpenVG (GC355), SATA * imx6dl: I2C4, PXP, EPDC, LCDIF * iomuxc/pads definition Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-04 19:09:16 +04:00
>;
};
};
};
};
ipu2: ipu@02800000 {
#crtc-cells = <1>;
compatible = "fsl,imx6q-ipu";
reg = <0x02800000 0x400000>;
interrupts = <0 8 0x4 0 7 0x4>;
clocks = <&clks 133>, <&clks 134>, <&clks 137>;
clock-names = "bus", "di0", "di1";
};
};
};