2007-03-19 17:15:28 +03:00
|
|
|
/*
|
|
|
|
|
* MPC832x RDB Device Tree Source
|
|
|
|
|
*
|
|
|
|
|
* Copyright 2007 Freescale Semiconductor Inc.
|
|
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
|
|
|
* under the terms of the GNU General Public License as published by the
|
|
|
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
|
|
|
* option) any later version.
|
|
|
|
|
*/
|
|
|
|
|
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
/dts-v1/;
|
|
|
|
|
|
2007-03-19 17:15:28 +03:00
|
|
|
/ {
|
|
|
|
|
model = "MPC8323ERDB";
|
|
|
|
|
compatible = "MPC8323ERDB", "MPC832xRDB", "MPC83xxRDB";
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
|
2007-12-12 10:46:12 +03:00
|
|
|
aliases {
|
|
|
|
|
ethernet0 = &enet0;
|
|
|
|
|
ethernet1 = &enet1;
|
|
|
|
|
serial0 = &serial0;
|
|
|
|
|
serial1 = &serial1;
|
|
|
|
|
pci0 = &pci0;
|
|
|
|
|
};
|
|
|
|
|
|
2007-03-19 17:15:28 +03:00
|
|
|
cpus {
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
|
|
PowerPC,8323@0 {
|
|
|
|
|
device_type = "cpu";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
reg = <0x0>;
|
|
|
|
|
d-cache-line-size = <0x20>; // 32 bytes
|
|
|
|
|
i-cache-line-size = <0x20>; // 32 bytes
|
|
|
|
|
d-cache-size = <16384>; // L1, 16K
|
|
|
|
|
i-cache-size = <16384>; // L1, 16K
|
2007-03-19 17:15:28 +03:00
|
|
|
timebase-frequency = <0>;
|
|
|
|
|
bus-frequency = <0>;
|
|
|
|
|
clock-frequency = <0>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
memory {
|
|
|
|
|
device_type = "memory";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
reg = <0x00000000 0x04000000>;
|
2007-03-19 17:15:28 +03:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
soc8323@e0000000 {
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
device_type = "soc";
|
2008-07-30 00:29:24 +04:00
|
|
|
compatible = "simple-bus";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
ranges = <0x0 0xe0000000 0x00100000>;
|
|
|
|
|
reg = <0xe0000000 0x00000200>;
|
2007-03-19 17:15:28 +03:00
|
|
|
bus-frequency = <0>;
|
|
|
|
|
|
|
|
|
|
wdt@200 {
|
|
|
|
|
device_type = "watchdog";
|
|
|
|
|
compatible = "mpc83xx_wdt";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
reg = <0x200 0x100>;
|
2007-03-19 17:15:28 +03:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
i2c@3000 {
|
2007-12-12 08:17:24 +03:00
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
cell-index = <0>;
|
2007-03-19 17:15:28 +03:00
|
|
|
compatible = "fsl-i2c";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
reg = <0x3000 0x100>;
|
|
|
|
|
interrupts = <14 0x8>;
|
2008-06-27 22:45:19 +04:00
|
|
|
interrupt-parent = <&ipic>;
|
2007-03-19 17:15:28 +03:00
|
|
|
dfsrr;
|
|
|
|
|
};
|
|
|
|
|
|
2007-12-12 10:46:12 +03:00
|
|
|
serial0: serial@4500 {
|
|
|
|
|
cell-index = <0>;
|
2007-03-19 17:15:28 +03:00
|
|
|
device_type = "serial";
|
|
|
|
|
compatible = "ns16550";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
reg = <0x4500 0x100>;
|
2007-03-19 17:15:28 +03:00
|
|
|
clock-frequency = <0>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
interrupts = <9 0x8>;
|
2008-06-27 22:45:19 +04:00
|
|
|
interrupt-parent = <&ipic>;
|
2007-03-19 17:15:28 +03:00
|
|
|
};
|
|
|
|
|
|
2007-12-12 10:46:12 +03:00
|
|
|
serial1: serial@4600 {
|
|
|
|
|
cell-index = <1>;
|
2007-03-19 17:15:28 +03:00
|
|
|
device_type = "serial";
|
|
|
|
|
compatible = "ns16550";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
reg = <0x4600 0x100>;
|
2007-03-19 17:15:28 +03:00
|
|
|
clock-frequency = <0>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
interrupts = <10 0x8>;
|
2008-06-27 22:45:19 +04:00
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
dma@82a8 {
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
|
|
|
|
|
reg = <0x82a8 4>;
|
|
|
|
|
ranges = <0 0x8100 0x1a8>;
|
|
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
|
interrupts = <71 8>;
|
|
|
|
|
cell-index = <0>;
|
|
|
|
|
dma-channel@0 {
|
|
|
|
|
compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
|
|
|
|
|
reg = <0 0x80>;
|
2008-09-24 07:05:10 +04:00
|
|
|
cell-index = <0>;
|
2008-06-27 22:45:19 +04:00
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
|
interrupts = <71 8>;
|
|
|
|
|
};
|
|
|
|
|
dma-channel@80 {
|
|
|
|
|
compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
|
|
|
|
|
reg = <0x80 0x80>;
|
2008-09-24 07:05:10 +04:00
|
|
|
cell-index = <1>;
|
2008-06-27 22:45:19 +04:00
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
|
interrupts = <71 8>;
|
|
|
|
|
};
|
|
|
|
|
dma-channel@100 {
|
|
|
|
|
compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
|
|
|
|
|
reg = <0x100 0x80>;
|
2008-09-24 07:05:10 +04:00
|
|
|
cell-index = <2>;
|
2008-06-27 22:45:19 +04:00
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
|
interrupts = <71 8>;
|
|
|
|
|
};
|
|
|
|
|
dma-channel@180 {
|
|
|
|
|
compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
|
|
|
|
|
reg = <0x180 0x28>;
|
2008-09-24 07:05:10 +04:00
|
|
|
cell-index = <3>;
|
2008-06-27 22:45:19 +04:00
|
|
|
interrupt-parent = <&ipic>;
|
|
|
|
|
interrupts = <71 8>;
|
|
|
|
|
};
|
2007-03-19 17:15:28 +03:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
crypto@30000 {
|
2008-07-09 04:13:33 +04:00
|
|
|
compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
|
|
|
|
|
reg = <0x30000 0x10000>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
interrupts = <11 0x8>;
|
2008-06-27 22:45:19 +04:00
|
|
|
interrupt-parent = <&ipic>;
|
2008-07-09 04:13:33 +04:00
|
|
|
fsl,num-channels = <1>;
|
|
|
|
|
fsl,channel-fifo-len = <24>;
|
|
|
|
|
fsl,exec-units-mask = <0x4c>;
|
|
|
|
|
fsl,descriptor-types-mask = <0x0122003f>;
|
2007-03-19 17:15:28 +03:00
|
|
|
};
|
|
|
|
|
|
2008-06-27 22:45:19 +04:00
|
|
|
ipic:pic@700 {
|
2007-03-19 17:15:28 +03:00
|
|
|
interrupt-controller;
|
|
|
|
|
#address-cells = <0>;
|
|
|
|
|
#interrupt-cells = <2>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
reg = <0x700 0x100>;
|
2007-03-19 17:15:28 +03:00
|
|
|
device_type = "ipic";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
par_io@1400 {
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
reg = <0x1400 0x100>;
|
2007-03-19 17:15:28 +03:00
|
|
|
device_type = "par_io";
|
|
|
|
|
num-ports = <7>;
|
|
|
|
|
|
|
|
|
|
ucc2pio:ucc_pin@02 {
|
|
|
|
|
pio-map = <
|
|
|
|
|
/* port pin dir open_drain assignment has_irq */
|
|
|
|
|
3 4 3 0 2 0 /* MDIO */
|
|
|
|
|
3 5 1 0 2 0 /* MDC */
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
3 21 2 0 1 0 /* RX_CLK (CLK16) */
|
|
|
|
|
3 23 2 0 1 0 /* TX_CLK (CLK3) */
|
|
|
|
|
0 18 1 0 1 0 /* TxD0 */
|
|
|
|
|
0 19 1 0 1 0 /* TxD1 */
|
|
|
|
|
0 20 1 0 1 0 /* TxD2 */
|
|
|
|
|
0 21 1 0 1 0 /* TxD3 */
|
|
|
|
|
0 22 2 0 1 0 /* RxD0 */
|
|
|
|
|
0 23 2 0 1 0 /* RxD1 */
|
|
|
|
|
0 24 2 0 1 0 /* RxD2 */
|
|
|
|
|
0 25 2 0 1 0 /* RxD3 */
|
|
|
|
|
0 26 2 0 1 0 /* RX_ER */
|
|
|
|
|
0 27 1 0 1 0 /* TX_ER */
|
|
|
|
|
0 28 2 0 1 0 /* RX_DV */
|
|
|
|
|
0 29 2 0 1 0 /* COL */
|
|
|
|
|
0 30 1 0 1 0 /* TX_EN */
|
|
|
|
|
0 31 2 0 1 0>; /* CRS */
|
2007-03-19 17:15:28 +03:00
|
|
|
};
|
|
|
|
|
ucc3pio:ucc_pin@03 {
|
|
|
|
|
pio-map = <
|
|
|
|
|
/* port pin dir open_drain assignment has_irq */
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
0 13 2 0 1 0 /* RX_CLK (CLK9) */
|
|
|
|
|
3 24 2 0 1 0 /* TX_CLK (CLK10) */
|
2007-03-19 17:15:28 +03:00
|
|
|
1 0 1 0 1 0 /* TxD0 */
|
|
|
|
|
1 1 1 0 1 0 /* TxD1 */
|
|
|
|
|
1 2 1 0 1 0 /* TxD2 */
|
|
|
|
|
1 3 1 0 1 0 /* TxD3 */
|
|
|
|
|
1 4 2 0 1 0 /* RxD0 */
|
|
|
|
|
1 5 2 0 1 0 /* RxD1 */
|
|
|
|
|
1 6 2 0 1 0 /* RxD2 */
|
|
|
|
|
1 7 2 0 1 0 /* RxD3 */
|
|
|
|
|
1 8 2 0 1 0 /* RX_ER */
|
|
|
|
|
1 9 1 0 1 0 /* TX_ER */
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
1 10 2 0 1 0 /* RX_DV */
|
|
|
|
|
1 11 2 0 1 0 /* COL */
|
|
|
|
|
1 12 1 0 1 0 /* TX_EN */
|
|
|
|
|
1 13 2 0 1 0>; /* CRS */
|
2007-03-19 17:15:28 +03:00
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
qe@e0100000 {
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
device_type = "qe";
|
2008-01-24 18:39:59 +03:00
|
|
|
compatible = "fsl,qe";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
ranges = <0x0 0xe0100000 0x00100000>;
|
|
|
|
|
reg = <0xe0100000 0x480>;
|
2007-03-19 17:15:28 +03:00
|
|
|
brg-frequency = <0>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
bus-frequency = <198000000>;
|
2007-03-19 17:15:28 +03:00
|
|
|
|
|
|
|
|
muram@10000 {
|
2008-01-28 10:27:51 +03:00
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <1>;
|
2008-01-24 18:39:59 +03:00
|
|
|
compatible = "fsl,qe-muram", "fsl,cpm-muram";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
ranges = <0x0 0x00010000 0x00004000>;
|
2007-03-19 17:15:28 +03:00
|
|
|
|
|
|
|
|
data-only@0 {
|
2008-01-24 18:39:59 +03:00
|
|
|
compatible = "fsl,qe-muram-data",
|
|
|
|
|
"fsl,cpm-muram-data";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
reg = <0x0 0x4000>;
|
2007-03-19 17:15:28 +03:00
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
spi@4c0 {
|
2008-01-24 18:40:07 +03:00
|
|
|
cell-index = <0>;
|
|
|
|
|
compatible = "fsl,spi";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
reg = <0x4c0 0x40>;
|
2007-03-19 17:15:28 +03:00
|
|
|
interrupts = <2>;
|
|
|
|
|
interrupt-parent = <&qeic>;
|
2007-08-23 15:36:00 +04:00
|
|
|
mode = "cpu-qe";
|
2007-03-19 17:15:28 +03:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
spi@500 {
|
2008-01-24 18:40:07 +03:00
|
|
|
cell-index = <1>;
|
|
|
|
|
compatible = "fsl,spi";
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
reg = <0x500 0x40>;
|
2007-03-19 17:15:28 +03:00
|
|
|
interrupts = <1>;
|
|
|
|
|
interrupt-parent = <&qeic>;
|
|
|
|
|
mode = "cpu";
|
|
|
|
|
};
|
|
|
|
|
|
2007-12-12 09:28:35 +03:00
|
|
|
enet0: ucc@3000 {
|
2007-03-19 17:15:28 +03:00
|
|
|
device_type = "network";
|
|
|
|
|
compatible = "ucc_geth";
|
2007-12-12 09:28:35 +03:00
|
|
|
cell-index = <2>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
reg = <0x3000 0x200>;
|
|
|
|
|
interrupts = <33>;
|
2007-03-19 17:15:28 +03:00
|
|
|
interrupt-parent = <&qeic>;
|
2007-06-22 23:33:15 +04:00
|
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
2007-12-04 00:17:59 +03:00
|
|
|
rx-clock-name = "clk16";
|
|
|
|
|
tx-clock-name = "clk3";
|
2007-03-19 17:15:28 +03:00
|
|
|
phy-handle = <&phy00>;
|
|
|
|
|
pio-handle = <&ucc2pio>;
|
|
|
|
|
};
|
|
|
|
|
|
2007-12-12 09:28:35 +03:00
|
|
|
enet1: ucc@2200 {
|
2007-03-19 17:15:28 +03:00
|
|
|
device_type = "network";
|
|
|
|
|
compatible = "ucc_geth";
|
2007-12-12 09:28:35 +03:00
|
|
|
cell-index = <3>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
reg = <0x2200 0x200>;
|
|
|
|
|
interrupts = <34>;
|
2007-03-19 17:15:28 +03:00
|
|
|
interrupt-parent = <&qeic>;
|
2007-06-22 23:33:15 +04:00
|
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
2007-12-04 00:17:59 +03:00
|
|
|
rx-clock-name = "clk9";
|
|
|
|
|
tx-clock-name = "clk10";
|
2007-03-19 17:15:28 +03:00
|
|
|
phy-handle = <&phy04>;
|
|
|
|
|
pio-handle = <&ucc3pio>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
mdio@3120 {
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
reg = <0x3120 0x18>;
|
2008-01-24 18:40:01 +03:00
|
|
|
compatible = "fsl,ucc-mdio";
|
2007-03-19 17:15:28 +03:00
|
|
|
|
|
|
|
|
phy00:ethernet-phy@00 {
|
2008-06-27 22:45:19 +04:00
|
|
|
interrupt-parent = <&ipic>;
|
2007-03-19 17:15:28 +03:00
|
|
|
interrupts = <0>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
reg = <0x0>;
|
2007-03-19 17:15:28 +03:00
|
|
|
device_type = "ethernet-phy";
|
|
|
|
|
};
|
|
|
|
|
phy04:ethernet-phy@04 {
|
2008-06-27 22:45:19 +04:00
|
|
|
interrupt-parent = <&ipic>;
|
2007-03-19 17:15:28 +03:00
|
|
|
interrupts = <0>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
reg = <0x4>;
|
2007-03-19 17:15:28 +03:00
|
|
|
device_type = "ethernet-phy";
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
2008-01-24 18:39:59 +03:00
|
|
|
qeic:interrupt-controller@80 {
|
2007-03-19 17:15:28 +03:00
|
|
|
interrupt-controller;
|
2008-01-24 18:39:59 +03:00
|
|
|
compatible = "fsl,qe-ic";
|
2007-03-19 17:15:28 +03:00
|
|
|
#address-cells = <0>;
|
|
|
|
|
#interrupt-cells = <1>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
reg = <0x80 0x80>;
|
2007-03-19 17:15:28 +03:00
|
|
|
big-endian;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
interrupts = <32 0x8 33 0x8>; //high:32 low:33
|
2008-06-27 22:45:19 +04:00
|
|
|
interrupt-parent = <&ipic>;
|
2007-03-19 17:15:28 +03:00
|
|
|
};
|
|
|
|
|
};
|
2007-09-13 03:23:46 +04:00
|
|
|
|
2007-12-12 10:46:12 +03:00
|
|
|
pci0: pci@e0008500 {
|
|
|
|
|
cell-index = <1>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
2007-09-13 03:23:46 +04:00
|
|
|
interrupt-map = <
|
|
|
|
|
/* IDSEL 0x10 AD16 (USB) */
|
2008-06-27 22:45:19 +04:00
|
|
|
0x8000 0x0 0x0 0x1 &ipic 17 0x8
|
2007-09-13 03:23:46 +04:00
|
|
|
|
|
|
|
|
/* IDSEL 0x11 AD17 (Mini1)*/
|
2008-06-27 22:45:19 +04:00
|
|
|
0x8800 0x0 0x0 0x1 &ipic 18 0x8
|
|
|
|
|
0x8800 0x0 0x0 0x2 &ipic 19 0x8
|
|
|
|
|
0x8800 0x0 0x0 0x3 &ipic 20 0x8
|
|
|
|
|
0x8800 0x0 0x0 0x4 &ipic 48 0x8
|
2007-09-13 03:23:46 +04:00
|
|
|
|
|
|
|
|
/* IDSEL 0x12 AD18 (PCI/Mini2) */
|
2008-06-27 22:45:19 +04:00
|
|
|
0x9000 0x0 0x0 0x1 &ipic 19 0x8
|
|
|
|
|
0x9000 0x0 0x0 0x2 &ipic 20 0x8
|
|
|
|
|
0x9000 0x0 0x0 0x3 &ipic 48 0x8
|
|
|
|
|
0x9000 0x0 0x0 0x4 &ipic 17 0x8>;
|
2007-09-13 03:23:46 +04:00
|
|
|
|
2008-06-27 22:45:19 +04:00
|
|
|
interrupt-parent = <&ipic>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
interrupts = <66 0x8>;
|
|
|
|
|
bus-range = <0x0 0x0>;
|
|
|
|
|
ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
|
|
|
|
|
0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
|
|
|
|
|
0x01000000 0x0 0xd0000000 0xd0000000 0x0 0x04000000>;
|
2007-09-13 03:23:46 +04:00
|
|
|
clock-frequency = <0>;
|
|
|
|
|
#interrupt-cells = <1>;
|
|
|
|
|
#size-cells = <2>;
|
|
|
|
|
#address-cells = <3>;
|
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
This patch converts the remaining 83xx boards to the dts-v1 format.
This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx,
mpc8349emitxgp and the mpc836x_mds.
The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already
dts-v1 and only undergo minor changes for the sake of formatting
consistency across the whole group of boards; i.e. the idea being
that you can do a "diff -u board_A.dts board_B.dts" and see something
meaningful.
The general rule I've applied is that entries for values normally
parsed by humans are left in decimal (i.e. IRQ, cache size, clock
rates, basic counts and indexes) and all other data (i.e. reg and
ranges, IRQ flags etc.) remain in hex.
I've used dtc to confirm that the output prior to this changeset
matches the output after this changeset is applied for all boards.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-29 00:09:36 +03:00
|
|
|
reg = <0xe0008500 0x100>;
|
2007-09-13 03:23:46 +04:00
|
|
|
compatible = "fsl,mpc8349-pci";
|
|
|
|
|
device_type = "pci";
|
|
|
|
|
};
|
2007-03-19 17:15:28 +03:00
|
|
|
};
|
