WSL2-Linux-Kernel/arch/powerpc/platforms/pseries/cmm.c

720 строки
17 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Collaborative memory management interface.
*
* Copyright (C) 2008 IBM Corporation
* Author(s): Brian King (brking@linux.vnet.ibm.com),
*/
#include <linux/ctype.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/fs.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 11:04:11 +03:00
#include <linux/gfp.h>
#include <linux/kthread.h>
#include <linux/module.h>
#include <linux/oom.h>
#include <linux/reboot.h>
#include <linux/sched.h>
#include <linux/stringify.h>
#include <linux/swap.h>
#include <linux/device.h>
#include <linux/mount.h>
#include <linux/pseudo_fs.h>
#include <linux/magic.h>
#include <linux/balloon_compaction.h>
#include <asm/firmware.h>
#include <asm/hvcall.h>
#include <asm/mmu.h>
#include <linux/uaccess.h>
powerpc: Make the CMM memory hotplug aware The Collaborative Memory Manager (CMM) module allocates individual pages over time that are not migratable. On a long running system this can severely impact the ability to find enough pages to support a hotplug memory remove operation. This patch adds a memory isolation notifier and a memory hotplug notifier. The memory isolation notifier will return the number of pages found in the range specified. This is used to determine if all of the used pages in a pageblock are owned by the balloon (or other entities in the notifier chain). The hotplug notifier will free pages in the range which is to be removed. The priority of this hotplug notifier is low so that it will be called near last, this helps avoids removing loaned pages in operations that fail due to other handlers. CMM activity will be halted when hotplug remove operations are active and resume activity after a delay period to allow the hypervisor time to adjust. Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Ingo Molnar <mingo@elte.hu> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Gerald Schaefer <geralds@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-17 17:44:52 +03:00
#include <linux/memory.h>
#include <asm/plpar_wrappers.h>
#include "pseries.h"
#define CMM_DRIVER_VERSION "1.0.0"
#define CMM_DEFAULT_DELAY 1
powerpc: Make the CMM memory hotplug aware The Collaborative Memory Manager (CMM) module allocates individual pages over time that are not migratable. On a long running system this can severely impact the ability to find enough pages to support a hotplug memory remove operation. This patch adds a memory isolation notifier and a memory hotplug notifier. The memory isolation notifier will return the number of pages found in the range specified. This is used to determine if all of the used pages in a pageblock are owned by the balloon (or other entities in the notifier chain). The hotplug notifier will free pages in the range which is to be removed. The priority of this hotplug notifier is low so that it will be called near last, this helps avoids removing loaned pages in operations that fail due to other handlers. CMM activity will be halted when hotplug remove operations are active and resume activity after a delay period to allow the hypervisor time to adjust. Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Ingo Molnar <mingo@elte.hu> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Gerald Schaefer <geralds@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-17 17:44:52 +03:00
#define CMM_HOTPLUG_DELAY 5
#define CMM_DEBUG 0
#define CMM_DISABLE 0
#define CMM_OOM_KB 1024
#define CMM_MIN_MEM_MB 256
#define KB2PAGES(_p) ((_p)>>(PAGE_SHIFT-10))
#define PAGES2KB(_p) ((_p)<<(PAGE_SHIFT-10))
powerpc: Make the CMM memory hotplug aware The Collaborative Memory Manager (CMM) module allocates individual pages over time that are not migratable. On a long running system this can severely impact the ability to find enough pages to support a hotplug memory remove operation. This patch adds a memory isolation notifier and a memory hotplug notifier. The memory isolation notifier will return the number of pages found in the range specified. This is used to determine if all of the used pages in a pageblock are owned by the balloon (or other entities in the notifier chain). The hotplug notifier will free pages in the range which is to be removed. The priority of this hotplug notifier is low so that it will be called near last, this helps avoids removing loaned pages in operations that fail due to other handlers. CMM activity will be halted when hotplug remove operations are active and resume activity after a delay period to allow the hypervisor time to adjust. Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Ingo Molnar <mingo@elte.hu> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Gerald Schaefer <geralds@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-17 17:44:52 +03:00
#define CMM_MEM_HOTPLUG_PRI 1
static unsigned int delay = CMM_DEFAULT_DELAY;
powerpc: Make the CMM memory hotplug aware The Collaborative Memory Manager (CMM) module allocates individual pages over time that are not migratable. On a long running system this can severely impact the ability to find enough pages to support a hotplug memory remove operation. This patch adds a memory isolation notifier and a memory hotplug notifier. The memory isolation notifier will return the number of pages found in the range specified. This is used to determine if all of the used pages in a pageblock are owned by the balloon (or other entities in the notifier chain). The hotplug notifier will free pages in the range which is to be removed. The priority of this hotplug notifier is low so that it will be called near last, this helps avoids removing loaned pages in operations that fail due to other handlers. CMM activity will be halted when hotplug remove operations are active and resume activity after a delay period to allow the hypervisor time to adjust. Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Ingo Molnar <mingo@elte.hu> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Gerald Schaefer <geralds@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-17 17:44:52 +03:00
static unsigned int hotplug_delay = CMM_HOTPLUG_DELAY;
static unsigned int oom_kb = CMM_OOM_KB;
static unsigned int cmm_debug = CMM_DEBUG;
static unsigned int cmm_disabled = CMM_DISABLE;
static unsigned long min_mem_mb = CMM_MIN_MEM_MB;
static bool __read_mostly simulate;
static unsigned long simulate_loan_target_kb;
static struct device cmm_dev;
MODULE_AUTHOR("Brian King <brking@linux.vnet.ibm.com>");
MODULE_DESCRIPTION("IBM System p Collaborative Memory Manager");
MODULE_LICENSE("GPL");
MODULE_VERSION(CMM_DRIVER_VERSION);
module_param_named(delay, delay, uint, 0644);
MODULE_PARM_DESC(delay, "Delay (in seconds) between polls to query hypervisor paging requests. "
"[Default=" __stringify(CMM_DEFAULT_DELAY) "]");
module_param_named(hotplug_delay, hotplug_delay, uint, 0644);
MODULE_PARM_DESC(hotplug_delay, "Delay (in seconds) after memory hotplug remove "
powerpc: Make the CMM memory hotplug aware The Collaborative Memory Manager (CMM) module allocates individual pages over time that are not migratable. On a long running system this can severely impact the ability to find enough pages to support a hotplug memory remove operation. This patch adds a memory isolation notifier and a memory hotplug notifier. The memory isolation notifier will return the number of pages found in the range specified. This is used to determine if all of the used pages in a pageblock are owned by the balloon (or other entities in the notifier chain). The hotplug notifier will free pages in the range which is to be removed. The priority of this hotplug notifier is low so that it will be called near last, this helps avoids removing loaned pages in operations that fail due to other handlers. CMM activity will be halted when hotplug remove operations are active and resume activity after a delay period to allow the hypervisor time to adjust. Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Ingo Molnar <mingo@elte.hu> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Gerald Schaefer <geralds@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-17 17:44:52 +03:00
"before loaning resumes. "
"[Default=" __stringify(CMM_HOTPLUG_DELAY) "]");
module_param_named(oom_kb, oom_kb, uint, 0644);
MODULE_PARM_DESC(oom_kb, "Amount of memory in kb to free on OOM. "
"[Default=" __stringify(CMM_OOM_KB) "]");
module_param_named(min_mem_mb, min_mem_mb, ulong, 0644);
MODULE_PARM_DESC(min_mem_mb, "Minimum amount of memory (in MB) to not balloon. "
"[Default=" __stringify(CMM_MIN_MEM_MB) "]");
module_param_named(debug, cmm_debug, uint, 0644);
MODULE_PARM_DESC(debug, "Enable module debugging logging. Set to 1 to enable. "
"[Default=" __stringify(CMM_DEBUG) "]");
module_param_named(simulate, simulate, bool, 0444);
MODULE_PARM_DESC(simulate, "Enable simulation mode (no communication with hw).");
#define cmm_dbg(...) if (cmm_debug) { printk(KERN_INFO "cmm: "__VA_ARGS__); }
static atomic_long_t loaned_pages;
static unsigned long loaned_pages_target;
static unsigned long oom_freed_pages;
powerpc: Make the CMM memory hotplug aware The Collaborative Memory Manager (CMM) module allocates individual pages over time that are not migratable. On a long running system this can severely impact the ability to find enough pages to support a hotplug memory remove operation. This patch adds a memory isolation notifier and a memory hotplug notifier. The memory isolation notifier will return the number of pages found in the range specified. This is used to determine if all of the used pages in a pageblock are owned by the balloon (or other entities in the notifier chain). The hotplug notifier will free pages in the range which is to be removed. The priority of this hotplug notifier is low so that it will be called near last, this helps avoids removing loaned pages in operations that fail due to other handlers. CMM activity will be halted when hotplug remove operations are active and resume activity after a delay period to allow the hypervisor time to adjust. Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Ingo Molnar <mingo@elte.hu> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Gerald Schaefer <geralds@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-17 17:44:52 +03:00
static DEFINE_MUTEX(hotplug_mutex);
static int hotplug_occurred; /* protected by the hotplug mutex */
static struct task_struct *cmm_thread_ptr;
static struct balloon_dev_info b_dev_info;
static long plpar_page_set_loaned(struct page *page)
{
const unsigned long vpa = page_to_phys(page);
unsigned long cmo_page_sz = cmo_get_page_size();
long rc = 0;
int i;
if (unlikely(simulate))
return 0;
for (i = 0; !rc && i < PAGE_SIZE; i += cmo_page_sz)
rc = plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_LOANED, vpa + i, 0);
for (i -= cmo_page_sz; rc && i != 0; i -= cmo_page_sz)
plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_ACTIVE,
vpa + i - cmo_page_sz, 0);
return rc;
}
static long plpar_page_set_active(struct page *page)
{
const unsigned long vpa = page_to_phys(page);
unsigned long cmo_page_sz = cmo_get_page_size();
long rc = 0;
int i;
if (unlikely(simulate))
return 0;
for (i = 0; !rc && i < PAGE_SIZE; i += cmo_page_sz)
rc = plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_ACTIVE, vpa + i, 0);
for (i -= cmo_page_sz; rc && i != 0; i -= cmo_page_sz)
plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_LOANED,
vpa + i - cmo_page_sz, 0);
return rc;
}
/**
* cmm_alloc_pages - Allocate pages and mark them as loaned
* @nr: number of pages to allocate
*
* Return value:
* number of pages requested to be allocated which were not
**/
static long cmm_alloc_pages(long nr)
{
struct page *page;
long rc;
cmm_dbg("Begin request for %ld pages\n", nr);
while (nr) {
powerpc: Make the CMM memory hotplug aware The Collaborative Memory Manager (CMM) module allocates individual pages over time that are not migratable. On a long running system this can severely impact the ability to find enough pages to support a hotplug memory remove operation. This patch adds a memory isolation notifier and a memory hotplug notifier. The memory isolation notifier will return the number of pages found in the range specified. This is used to determine if all of the used pages in a pageblock are owned by the balloon (or other entities in the notifier chain). The hotplug notifier will free pages in the range which is to be removed. The priority of this hotplug notifier is low so that it will be called near last, this helps avoids removing loaned pages in operations that fail due to other handlers. CMM activity will be halted when hotplug remove operations are active and resume activity after a delay period to allow the hypervisor time to adjust. Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Ingo Molnar <mingo@elte.hu> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Gerald Schaefer <geralds@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-17 17:44:52 +03:00
/* Exit if a hotplug operation is in progress or occurred */
if (mutex_trylock(&hotplug_mutex)) {
if (hotplug_occurred) {
mutex_unlock(&hotplug_mutex);
break;
}
mutex_unlock(&hotplug_mutex);
} else {
break;
}
page = balloon_page_alloc();
if (!page)
break;
rc = plpar_page_set_loaned(page);
if (rc) {
pr_err("%s: Can not set page to loaned. rc=%ld\n", __func__, rc);
__free_page(page);
break;
}
balloon_page_enqueue(&b_dev_info, page);
atomic_long_inc(&loaned_pages);
adjust_managed_page_count(page, -1);
nr--;
}
cmm_dbg("End request with %ld pages unfulfilled\n", nr);
return nr;
}
/**
* cmm_free_pages - Free pages and mark them as active
* @nr: number of pages to free
*
* Return value:
* number of pages requested to be freed which were not
**/
static long cmm_free_pages(long nr)
{
struct page *page;
cmm_dbg("Begin free of %ld pages.\n", nr);
while (nr) {
page = balloon_page_dequeue(&b_dev_info);
if (!page)
break;
plpar_page_set_active(page);
adjust_managed_page_count(page, 1);
__free_page(page);
atomic_long_dec(&loaned_pages);
nr--;
}
cmm_dbg("End request with %ld pages unfulfilled\n", nr);
return nr;
}
/**
* cmm_oom_notify - OOM notifier
* @self: notifier block struct
* @dummy: not used
* @parm: returned - number of pages freed
*
* Return value:
* NOTIFY_OK
**/
static int cmm_oom_notify(struct notifier_block *self,
unsigned long dummy, void *parm)
{
unsigned long *freed = parm;
long nr = KB2PAGES(oom_kb);
cmm_dbg("OOM processing started\n");
nr = cmm_free_pages(nr);
loaned_pages_target = atomic_long_read(&loaned_pages);
*freed += KB2PAGES(oom_kb) - nr;
oom_freed_pages += KB2PAGES(oom_kb) - nr;
cmm_dbg("OOM processing complete\n");
return NOTIFY_OK;
}
/**
* cmm_get_mpp - Read memory performance parameters
*
* Makes hcall to query the current page loan request from the hypervisor.
*
* Return value:
* nothing
**/
static void cmm_get_mpp(void)
{
const long __loaned_pages = atomic_long_read(&loaned_pages);
const long total_pages = totalram_pages() + __loaned_pages;
int rc;
struct hvcall_mpp_data mpp_data;
signed long active_pages_target, page_loan_request, target;
signed long min_mem_pages = (min_mem_mb * 1024 * 1024) / PAGE_SIZE;
if (likely(!simulate)) {
rc = h_get_mpp(&mpp_data);
if (rc != H_SUCCESS)
return;
page_loan_request = div_s64((s64)mpp_data.loan_request,
PAGE_SIZE);
target = page_loan_request + __loaned_pages;
} else {
target = KB2PAGES(simulate_loan_target_kb);
page_loan_request = target - __loaned_pages;
}
if (target < 0 || total_pages < min_mem_pages)
target = 0;
if (target > oom_freed_pages)
target -= oom_freed_pages;
else
target = 0;
active_pages_target = total_pages - target;
if (min_mem_pages > active_pages_target)
target = total_pages - min_mem_pages;
if (target < 0)
target = 0;
loaned_pages_target = target;
cmm_dbg("delta = %ld, loaned = %lu, target = %lu, oom = %lu, totalram = %lu\n",
page_loan_request, __loaned_pages, loaned_pages_target,
oom_freed_pages, totalram_pages());
}
static struct notifier_block cmm_oom_nb = {
.notifier_call = cmm_oom_notify
};
/**
* cmm_thread - CMM task thread
* @dummy: not used
*
* Return value:
* 0
**/
static int cmm_thread(void *dummy)
{
unsigned long timeleft;
long __loaned_pages;
while (1) {
timeleft = msleep_interruptible(delay * 1000);
powerpc: Make the CMM memory hotplug aware The Collaborative Memory Manager (CMM) module allocates individual pages over time that are not migratable. On a long running system this can severely impact the ability to find enough pages to support a hotplug memory remove operation. This patch adds a memory isolation notifier and a memory hotplug notifier. The memory isolation notifier will return the number of pages found in the range specified. This is used to determine if all of the used pages in a pageblock are owned by the balloon (or other entities in the notifier chain). The hotplug notifier will free pages in the range which is to be removed. The priority of this hotplug notifier is low so that it will be called near last, this helps avoids removing loaned pages in operations that fail due to other handlers. CMM activity will be halted when hotplug remove operations are active and resume activity after a delay period to allow the hypervisor time to adjust. Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Ingo Molnar <mingo@elte.hu> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Gerald Schaefer <geralds@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-17 17:44:52 +03:00
if (kthread_should_stop() || timeleft)
break;
powerpc: Make the CMM memory hotplug aware The Collaborative Memory Manager (CMM) module allocates individual pages over time that are not migratable. On a long running system this can severely impact the ability to find enough pages to support a hotplug memory remove operation. This patch adds a memory isolation notifier and a memory hotplug notifier. The memory isolation notifier will return the number of pages found in the range specified. This is used to determine if all of the used pages in a pageblock are owned by the balloon (or other entities in the notifier chain). The hotplug notifier will free pages in the range which is to be removed. The priority of this hotplug notifier is low so that it will be called near last, this helps avoids removing loaned pages in operations that fail due to other handlers. CMM activity will be halted when hotplug remove operations are active and resume activity after a delay period to allow the hypervisor time to adjust. Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Ingo Molnar <mingo@elte.hu> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Gerald Schaefer <geralds@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-17 17:44:52 +03:00
if (mutex_trylock(&hotplug_mutex)) {
if (hotplug_occurred) {
hotplug_occurred = 0;
mutex_unlock(&hotplug_mutex);
cmm_dbg("Hotplug operation has occurred, "
"loaning activity suspended "
"for %d seconds.\n",
hotplug_delay);
timeleft = msleep_interruptible(hotplug_delay *
1000);
if (kthread_should_stop() || timeleft)
break;
continue;
}
mutex_unlock(&hotplug_mutex);
} else {
cmm_dbg("Hotplug operation in progress, activity "
"suspended\n");
continue;
}
cmm_get_mpp();
__loaned_pages = atomic_long_read(&loaned_pages);
if (loaned_pages_target > __loaned_pages) {
if (cmm_alloc_pages(loaned_pages_target - __loaned_pages))
loaned_pages_target = __loaned_pages;
} else if (loaned_pages_target < __loaned_pages)
cmm_free_pages(__loaned_pages - loaned_pages_target);
}
return 0;
}
#define CMM_SHOW(name, format, args...) \
static ssize_t show_##name(struct device *dev, \
struct device_attribute *attr, \
char *buf) \
{ \
return sprintf(buf, format, ##args); \
} \
static DEVICE_ATTR(name, 0444, show_##name, NULL)
CMM_SHOW(loaned_kb, "%lu\n", PAGES2KB(atomic_long_read(&loaned_pages)));
CMM_SHOW(loaned_target_kb, "%lu\n", PAGES2KB(loaned_pages_target));
static ssize_t show_oom_pages(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%lu\n", PAGES2KB(oom_freed_pages));
}
static ssize_t store_oom_pages(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
unsigned long val = simple_strtoul (buf, NULL, 10);
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
if (val != 0)
return -EBADMSG;
oom_freed_pages = 0;
return count;
}
static DEVICE_ATTR(oom_freed_kb, 0644,
show_oom_pages, store_oom_pages);
static struct device_attribute *cmm_attrs[] = {
&dev_attr_loaned_kb,
&dev_attr_loaned_target_kb,
&dev_attr_oom_freed_kb,
};
static DEVICE_ULONG_ATTR(simulate_loan_target_kb, 0644,
simulate_loan_target_kb);
static struct bus_type cmm_subsys = {
.name = "cmm",
.dev_name = "cmm",
};
static void cmm_release_device(struct device *dev)
{
}
/**
* cmm_sysfs_register - Register with sysfs
*
* Return value:
* 0 on success / other on failure
**/
static int cmm_sysfs_register(struct device *dev)
{
int i, rc;
if ((rc = subsys_system_register(&cmm_subsys, NULL)))
return rc;
dev->id = 0;
dev->bus = &cmm_subsys;
dev->release = cmm_release_device;
if ((rc = device_register(dev)))
goto subsys_unregister;
for (i = 0; i < ARRAY_SIZE(cmm_attrs); i++) {
if ((rc = device_create_file(dev, cmm_attrs[i])))
goto fail;
}
if (!simulate)
return 0;
rc = device_create_file(dev, &dev_attr_simulate_loan_target_kb.attr);
if (rc)
goto fail;
return 0;
fail:
while (--i >= 0)
device_remove_file(dev, cmm_attrs[i]);
device_unregister(dev);
subsys_unregister:
bus_unregister(&cmm_subsys);
return rc;
}
/**
* cmm_unregister_sysfs - Unregister from sysfs
*
**/
static void cmm_unregister_sysfs(struct device *dev)
{
int i;
for (i = 0; i < ARRAY_SIZE(cmm_attrs); i++)
device_remove_file(dev, cmm_attrs[i]);
device_unregister(dev);
bus_unregister(&cmm_subsys);
}
/**
* cmm_reboot_notifier - Make sure pages are not still marked as "loaned"
*
**/
static int cmm_reboot_notifier(struct notifier_block *nb,
unsigned long action, void *unused)
{
if (action == SYS_RESTART) {
if (cmm_thread_ptr)
kthread_stop(cmm_thread_ptr);
cmm_thread_ptr = NULL;
cmm_free_pages(atomic_long_read(&loaned_pages));
}
return NOTIFY_DONE;
}
static struct notifier_block cmm_reboot_nb = {
.notifier_call = cmm_reboot_notifier,
};
powerpc: Make the CMM memory hotplug aware The Collaborative Memory Manager (CMM) module allocates individual pages over time that are not migratable. On a long running system this can severely impact the ability to find enough pages to support a hotplug memory remove operation. This patch adds a memory isolation notifier and a memory hotplug notifier. The memory isolation notifier will return the number of pages found in the range specified. This is used to determine if all of the used pages in a pageblock are owned by the balloon (or other entities in the notifier chain). The hotplug notifier will free pages in the range which is to be removed. The priority of this hotplug notifier is low so that it will be called near last, this helps avoids removing loaned pages in operations that fail due to other handlers. CMM activity will be halted when hotplug remove operations are active and resume activity after a delay period to allow the hypervisor time to adjust. Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Ingo Molnar <mingo@elte.hu> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Gerald Schaefer <geralds@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-17 17:44:52 +03:00
/**
* cmm_memory_cb - Handle memory hotplug notifier calls
* @self: notifier block struct
* @action: action to take
* @arg: struct memory_notify data for handler
*
* Return value:
* NOTIFY_OK or notifier error based on subfunction return value
*
**/
static int cmm_memory_cb(struct notifier_block *self,
unsigned long action, void *arg)
{
int ret = 0;
switch (action) {
case MEM_GOING_OFFLINE:
mutex_lock(&hotplug_mutex);
hotplug_occurred = 1;
break;
case MEM_OFFLINE:
case MEM_CANCEL_OFFLINE:
mutex_unlock(&hotplug_mutex);
cmm_dbg("Memory offline operation complete.\n");
break;
case MEM_GOING_ONLINE:
case MEM_ONLINE:
case MEM_CANCEL_ONLINE:
break;
}
return notifier_from_errno(ret);
powerpc: Make the CMM memory hotplug aware The Collaborative Memory Manager (CMM) module allocates individual pages over time that are not migratable. On a long running system this can severely impact the ability to find enough pages to support a hotplug memory remove operation. This patch adds a memory isolation notifier and a memory hotplug notifier. The memory isolation notifier will return the number of pages found in the range specified. This is used to determine if all of the used pages in a pageblock are owned by the balloon (or other entities in the notifier chain). The hotplug notifier will free pages in the range which is to be removed. The priority of this hotplug notifier is low so that it will be called near last, this helps avoids removing loaned pages in operations that fail due to other handlers. CMM activity will be halted when hotplug remove operations are active and resume activity after a delay period to allow the hypervisor time to adjust. Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Ingo Molnar <mingo@elte.hu> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Gerald Schaefer <geralds@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-17 17:44:52 +03:00
}
static struct notifier_block cmm_mem_nb = {
.notifier_call = cmm_memory_cb,
.priority = CMM_MEM_HOTPLUG_PRI
};
#ifdef CONFIG_BALLOON_COMPACTION
static struct vfsmount *balloon_mnt;
static int cmm_init_fs_context(struct fs_context *fc)
{
return init_pseudo(fc, PPC_CMM_MAGIC) ? 0 : -ENOMEM;
}
static struct file_system_type balloon_fs = {
.name = "ppc-cmm",
.init_fs_context = cmm_init_fs_context,
.kill_sb = kill_anon_super,
};
static int cmm_migratepage(struct balloon_dev_info *b_dev_info,
struct page *newpage, struct page *page,
enum migrate_mode mode)
{
unsigned long flags;
/*
* loan/"inflate" the newpage first.
*
* We might race against the cmm_thread who might discover after our
* loan request that another page is to be unloaned. However, once
* the cmm_thread runs again later, this error will automatically
* be corrected.
*/
if (plpar_page_set_loaned(newpage)) {
/* Unlikely, but possible. Tell the caller not to retry now. */
pr_err_ratelimited("%s: Cannot set page to loaned.", __func__);
return -EBUSY;
}
/* balloon page list reference */
get_page(newpage);
/*
* When we migrate a page to a different zone, we have to fixup the
* count of both involved zones as we adjusted the managed page count
* when inflating.
*/
if (page_zone(page) != page_zone(newpage)) {
adjust_managed_page_count(page, 1);
adjust_managed_page_count(newpage, -1);
}
spin_lock_irqsave(&b_dev_info->pages_lock, flags);
balloon_page_insert(b_dev_info, newpage);
balloon_page_delete(page);
b_dev_info->isolated_pages--;
spin_unlock_irqrestore(&b_dev_info->pages_lock, flags);
/*
* activate/"deflate" the old page. We ignore any errors just like the
* other callers.
*/
plpar_page_set_active(page);
/* balloon page list reference */
put_page(page);
return MIGRATEPAGE_SUCCESS;
}
static int cmm_balloon_compaction_init(void)
{
int rc;
balloon_devinfo_init(&b_dev_info);
b_dev_info.migratepage = cmm_migratepage;
balloon_mnt = kern_mount(&balloon_fs);
if (IS_ERR(balloon_mnt)) {
rc = PTR_ERR(balloon_mnt);
balloon_mnt = NULL;
return rc;
}
b_dev_info.inode = alloc_anon_inode(balloon_mnt->mnt_sb);
if (IS_ERR(b_dev_info.inode)) {
rc = PTR_ERR(b_dev_info.inode);
b_dev_info.inode = NULL;
kern_unmount(balloon_mnt);
balloon_mnt = NULL;
return rc;
}
b_dev_info.inode->i_mapping->a_ops = &balloon_aops;
return 0;
}
static void cmm_balloon_compaction_deinit(void)
{
if (b_dev_info.inode)
iput(b_dev_info.inode);
b_dev_info.inode = NULL;
kern_unmount(balloon_mnt);
balloon_mnt = NULL;
}
#else /* CONFIG_BALLOON_COMPACTION */
static int cmm_balloon_compaction_init(void)
{
return 0;
}
static void cmm_balloon_compaction_deinit(void)
{
}
#endif /* CONFIG_BALLOON_COMPACTION */
/**
* cmm_init - Module initialization
*
* Return value:
* 0 on success / other on failure
**/
static int cmm_init(void)
{
int rc;
if (!firmware_has_feature(FW_FEATURE_CMO) && !simulate)
return -EOPNOTSUPP;
rc = cmm_balloon_compaction_init();
if (rc)
return rc;
rc = register_oom_notifier(&cmm_oom_nb);
if (rc < 0)
goto out_balloon_compaction;
if ((rc = register_reboot_notifier(&cmm_reboot_nb)))
goto out_oom_notifier;
if ((rc = cmm_sysfs_register(&cmm_dev)))
goto out_reboot_notifier;
rc = register_memory_notifier(&cmm_mem_nb);
if (rc)
goto out_unregister_notifier;
if (cmm_disabled)
return 0;
cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread");
if (IS_ERR(cmm_thread_ptr)) {
rc = PTR_ERR(cmm_thread_ptr);
powerpc: Make the CMM memory hotplug aware The Collaborative Memory Manager (CMM) module allocates individual pages over time that are not migratable. On a long running system this can severely impact the ability to find enough pages to support a hotplug memory remove operation. This patch adds a memory isolation notifier and a memory hotplug notifier. The memory isolation notifier will return the number of pages found in the range specified. This is used to determine if all of the used pages in a pageblock are owned by the balloon (or other entities in the notifier chain). The hotplug notifier will free pages in the range which is to be removed. The priority of this hotplug notifier is low so that it will be called near last, this helps avoids removing loaned pages in operations that fail due to other handlers. CMM activity will be halted when hotplug remove operations are active and resume activity after a delay period to allow the hypervisor time to adjust. Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Ingo Molnar <mingo@elte.hu> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Gerald Schaefer <geralds@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-17 17:44:52 +03:00
goto out_unregister_notifier;
}
return 0;
powerpc: Make the CMM memory hotplug aware The Collaborative Memory Manager (CMM) module allocates individual pages over time that are not migratable. On a long running system this can severely impact the ability to find enough pages to support a hotplug memory remove operation. This patch adds a memory isolation notifier and a memory hotplug notifier. The memory isolation notifier will return the number of pages found in the range specified. This is used to determine if all of the used pages in a pageblock are owned by the balloon (or other entities in the notifier chain). The hotplug notifier will free pages in the range which is to be removed. The priority of this hotplug notifier is low so that it will be called near last, this helps avoids removing loaned pages in operations that fail due to other handlers. CMM activity will be halted when hotplug remove operations are active and resume activity after a delay period to allow the hypervisor time to adjust. Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Ingo Molnar <mingo@elte.hu> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Gerald Schaefer <geralds@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-17 17:44:52 +03:00
out_unregister_notifier:
unregister_memory_notifier(&cmm_mem_nb);
cmm_unregister_sysfs(&cmm_dev);
out_reboot_notifier:
unregister_reboot_notifier(&cmm_reboot_nb);
out_oom_notifier:
unregister_oom_notifier(&cmm_oom_nb);
out_balloon_compaction:
cmm_balloon_compaction_deinit();
return rc;
}
/**
* cmm_exit - Module exit
*
* Return value:
* nothing
**/
static void cmm_exit(void)
{
if (cmm_thread_ptr)
kthread_stop(cmm_thread_ptr);
unregister_oom_notifier(&cmm_oom_nb);
unregister_reboot_notifier(&cmm_reboot_nb);
powerpc: Make the CMM memory hotplug aware The Collaborative Memory Manager (CMM) module allocates individual pages over time that are not migratable. On a long running system this can severely impact the ability to find enough pages to support a hotplug memory remove operation. This patch adds a memory isolation notifier and a memory hotplug notifier. The memory isolation notifier will return the number of pages found in the range specified. This is used to determine if all of the used pages in a pageblock are owned by the balloon (or other entities in the notifier chain). The hotplug notifier will free pages in the range which is to be removed. The priority of this hotplug notifier is low so that it will be called near last, this helps avoids removing loaned pages in operations that fail due to other handlers. CMM activity will be halted when hotplug remove operations are active and resume activity after a delay period to allow the hypervisor time to adjust. Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Ingo Molnar <mingo@elte.hu> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Gerald Schaefer <geralds@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-17 17:44:52 +03:00
unregister_memory_notifier(&cmm_mem_nb);
cmm_free_pages(atomic_long_read(&loaned_pages));
cmm_unregister_sysfs(&cmm_dev);
cmm_balloon_compaction_deinit();
}
/**
* cmm_set_disable - Disable/Enable CMM
*
* Return value:
* 0 on success / other on failure
**/
static int cmm_set_disable(const char *val, const struct kernel_param *kp)
{
int disable = simple_strtoul(val, NULL, 10);
if (disable != 0 && disable != 1)
return -EINVAL;
if (disable && !cmm_disabled) {
if (cmm_thread_ptr)
kthread_stop(cmm_thread_ptr);
cmm_thread_ptr = NULL;
cmm_free_pages(atomic_long_read(&loaned_pages));
} else if (!disable && cmm_disabled) {
cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread");
if (IS_ERR(cmm_thread_ptr))
return PTR_ERR(cmm_thread_ptr);
}
cmm_disabled = disable;
return 0;
}
module_param_call(disable, cmm_set_disable, param_get_uint,
&cmm_disabled, 0644);
MODULE_PARM_DESC(disable, "Disable CMM. Set to 1 to disable. "
"[Default=" __stringify(CMM_DISABLE) "]");
module_init(cmm_init);
module_exit(cmm_exit);