WSL2-Linux-Kernel/include/scsi/libfc.h

1140 строки
34 KiB
C
Исходник Обычный вид История

/*
* Copyright(c) 2007 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
* Maintained at www.Open-FCoE.org
*/
#ifndef _LIBFC_H_
#define _LIBFC_H_
#include <linux/timer.h>
#include <linux/if.h>
#include <linux/percpu.h>
#include <scsi/scsi_transport.h>
#include <scsi/scsi_transport_fc.h>
#include <scsi/scsi_bsg_fc.h>
#include <scsi/fc/fc_fcp.h>
#include <scsi/fc/fc_ns.h>
#include <scsi/fc/fc_ms.h>
#include <scsi/fc/fc_els.h>
#include <scsi/fc/fc_gs.h>
#include <scsi/fc_frame.h>
#define FC_FC4_PROV_SIZE (FC_TYPE_FCP + 1) /* size of tables */
/*
* libfc error codes
*/
#define FC_NO_ERR 0 /* no error */
#define FC_EX_TIMEOUT 1 /* Exchange timeout */
#define FC_EX_CLOSED 2 /* Exchange closed */
/**
* enum fc_lport_state - Local port states
* @LPORT_ST_DISABLED: Disabled
* @LPORT_ST_FLOGI: Fabric login (FLOGI) sent
* @LPORT_ST_DNS: Waiting for name server remote port to become ready
* @LPORT_ST_RPN_ID: Register port name by ID (RPN_ID) sent
* @LPORT_ST_RFT_ID: Register Fibre Channel types by ID (RFT_ID) sent
* @LPORT_ST_RFF_ID: Register FC-4 Features by ID (RFF_ID) sent
* @LPORT_ST_FDMI: Waiting for mgmt server rport to become ready
* @LPORT_ST_RHBA:
* @LPORT_ST_SCR: State Change Register (SCR) sent
* @LPORT_ST_READY: Ready for use
* @LPORT_ST_LOGO: Local port logout (LOGO) sent
* @LPORT_ST_RESET: Local port reset
*/
enum fc_lport_state {
LPORT_ST_DISABLED = 0,
LPORT_ST_FLOGI,
LPORT_ST_DNS,
LPORT_ST_RNN_ID,
LPORT_ST_RSNN_NN,
LPORT_ST_RSPN_ID,
LPORT_ST_RFT_ID,
LPORT_ST_RFF_ID,
LPORT_ST_FDMI,
LPORT_ST_RHBA,
LPORT_ST_RPA,
LPORT_ST_DHBA,
LPORT_ST_DPRT,
LPORT_ST_SCR,
LPORT_ST_READY,
LPORT_ST_LOGO,
LPORT_ST_RESET
};
enum fc_disc_event {
DISC_EV_NONE = 0,
DISC_EV_SUCCESS,
DISC_EV_FAILED
};
/**
* enum fc_rport_state - Remote port states
* @RPORT_ST_INIT: Initialized
* @RPORT_ST_FLOGI: Waiting for FLOGI completion for point-to-multipoint
* @RPORT_ST_PLOGI_WAIT: Waiting for peer to login for point-to-multipoint
* @RPORT_ST_PLOGI: Waiting for PLOGI completion
* @RPORT_ST_PRLI: Waiting for PRLI completion
* @RPORT_ST_RTV: Waiting for RTV completion
* @RPORT_ST_READY: Ready for use
* @RPORT_ST_ADISC: Discover Address sent
* @RPORT_ST_DELETE: Remote port being deleted
*/
enum fc_rport_state {
RPORT_ST_INIT,
RPORT_ST_FLOGI,
RPORT_ST_PLOGI_WAIT,
RPORT_ST_PLOGI,
RPORT_ST_PRLI,
RPORT_ST_RTV,
RPORT_ST_READY,
RPORT_ST_ADISC,
RPORT_ST_DELETE,
};
/**
* struct fc_disc_port - temporary discovery port to hold rport identifiers
* @lp: Fibre Channel host port instance
* @peers: Node for list management during discovery and RSCN processing
* @rport_work: Work struct for starting the rport state machine
* @port_id: Port ID of the discovered port
*/
struct fc_disc_port {
struct fc_lport *lp;
struct list_head peers;
struct work_struct rport_work;
u32 port_id;
};
/**
* enum fc_rport_event - Remote port events
* @RPORT_EV_NONE: No event
* @RPORT_EV_READY: Remote port is ready for use
* @RPORT_EV_FAILED: State machine failed, remote port is not ready
* @RPORT_EV_STOP: Remote port has been stopped
* @RPORT_EV_LOGO: Remote port logout (LOGO) sent
*/
enum fc_rport_event {
RPORT_EV_NONE = 0,
RPORT_EV_READY,
RPORT_EV_FAILED,
RPORT_EV_STOP,
RPORT_EV_LOGO
};
struct fc_rport_priv;
/**
* struct fc_rport_operations - Operations for a remote port
* @event_callback: Function to be called for remote port events
*/
struct fc_rport_operations {
void (*event_callback)(struct fc_lport *, struct fc_rport_priv *,
enum fc_rport_event);
};
/**
* struct fc_rport_libfc_priv - libfc internal information about a remote port
* @local_port: The associated local port
* @rp_state: Indicates READY for I/O or DELETE when blocked
* @flags: REC and RETRY supported flags
* @e_d_tov: Error detect timeout value (in msec)
* @r_a_tov: Resource allocation timeout value (in msec)
*/
struct fc_rport_libfc_priv {
struct fc_lport *local_port;
enum fc_rport_state rp_state;
u16 flags;
#define FC_RP_FLAGS_REC_SUPPORTED (1 << 0)
#define FC_RP_FLAGS_RETRY (1 << 1)
[SCSI] libfc: Fix remote port restart problem This patch somewhat combines two fixes to remote port handing in libfc. The first problem was that rport work could be queued on a deleted and freed rport. This is handled by not resetting rdata->event ton NONE if the rdata is about to be deleted. However, that fix led to the second problem, described by Bhanu Gollapudi, as follows: > Here is the sequence of events. T1 is first LOGO receive thread, T2 is > fc_rport_work() scheduled by T1 and T3 is second LOGO receive thread and > T4 is fc_rport_work scheduled by T3. > > 1. (T1)Received 1st LOGO in state Ready > 2. (T1)Delete port & enter to RESTART state. > 3. (T1)schdule event_work, since event is RPORT_EV_NONE. > 4. (T1)set event = RPORT_EV_LOGO > 5. (T1)Enter RESTART state as disc_id is set. > 6. (T2)remember to PLOGI, and set event = RPORT_EV_NONE > 6. (T3)Received 2nd LOGO > 7. (T3)Delete Port & enter to RESTART state. > 8. (T3)schedule event_work, since event is RPORT_EV_NONE. > 9. (T3)Enter RESTART state as disc_id is set. > 9. (T3)set event = RPORT_EV_LOGO > 10.(T2)work restart, enter PLOGI state and issues PLOGI > 11.(T4)Since state is not RESTART anymore, restart is not set, and the > event is not reset to RPORT_EV_NONE. (current event is RPORT_EV_LOGO). > 12. Now, PLOGI succeeds and fc_rport_enter_ready() will not schedule > event_work, and hence the rport will never be created, eventually losing > the target after dev_loss_tmo. So, the problem here is that we were tracking the desire for the rport be restarted by state RESTART, which was otherwise equivalent to DELETE. A contributing factor is that we dropped the lock between steps 6 and 10 in thread T2, which allows the state to change, and we didn't completely re-evaluate then. This is hopefully corrected by the following minor redesign: Simplify the rport restart logic by making the decision to restart after deleting the transport rport. That decision is based on a new STARTED flag that indicates fc_rport_login() has been called and fc_rport_logoff() has not been called since then. This replaces the need for the RESTART state. Only restart if the rdata is still in DELETED state and only if it still has the STARTED flag set. Also now, since we clear the event code much later in the work thread, allow for the possibility that the rport may have become READY again via incoming PLOGI, and if so, queue another event to handle that. In the problem scenario, the second LOGO received will cause the LOGO event to occur again. Reported-by: Bhanu Gollapudi <bprakash@broadcom.com> Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-06-12 03:44:51 +04:00
#define FC_RP_STARTED (1 << 2)
#define FC_RP_FLAGS_CONF_REQ (1 << 3)
unsigned int e_d_tov;
unsigned int r_a_tov;
};
/**
* struct fc_rport_priv - libfc remote port and discovery info
* @local_port: The associated local port
* @rport: The FC transport remote port
* @kref: Reference counter
* @rp_state: Enumeration that tracks progress of PLOGI, PRLI,
* and RTV exchanges
* @ids: The remote port identifiers and roles
[SCSI] libfc: Fix remote port restart problem This patch somewhat combines two fixes to remote port handing in libfc. The first problem was that rport work could be queued on a deleted and freed rport. This is handled by not resetting rdata->event ton NONE if the rdata is about to be deleted. However, that fix led to the second problem, described by Bhanu Gollapudi, as follows: > Here is the sequence of events. T1 is first LOGO receive thread, T2 is > fc_rport_work() scheduled by T1 and T3 is second LOGO receive thread and > T4 is fc_rport_work scheduled by T3. > > 1. (T1)Received 1st LOGO in state Ready > 2. (T1)Delete port & enter to RESTART state. > 3. (T1)schdule event_work, since event is RPORT_EV_NONE. > 4. (T1)set event = RPORT_EV_LOGO > 5. (T1)Enter RESTART state as disc_id is set. > 6. (T2)remember to PLOGI, and set event = RPORT_EV_NONE > 6. (T3)Received 2nd LOGO > 7. (T3)Delete Port & enter to RESTART state. > 8. (T3)schedule event_work, since event is RPORT_EV_NONE. > 9. (T3)Enter RESTART state as disc_id is set. > 9. (T3)set event = RPORT_EV_LOGO > 10.(T2)work restart, enter PLOGI state and issues PLOGI > 11.(T4)Since state is not RESTART anymore, restart is not set, and the > event is not reset to RPORT_EV_NONE. (current event is RPORT_EV_LOGO). > 12. Now, PLOGI succeeds and fc_rport_enter_ready() will not schedule > event_work, and hence the rport will never be created, eventually losing > the target after dev_loss_tmo. So, the problem here is that we were tracking the desire for the rport be restarted by state RESTART, which was otherwise equivalent to DELETE. A contributing factor is that we dropped the lock between steps 6 and 10 in thread T2, which allows the state to change, and we didn't completely re-evaluate then. This is hopefully corrected by the following minor redesign: Simplify the rport restart logic by making the decision to restart after deleting the transport rport. That decision is based on a new STARTED flag that indicates fc_rport_login() has been called and fc_rport_logoff() has not been called since then. This replaces the need for the RESTART state. Only restart if the rdata is still in DELETED state and only if it still has the STARTED flag set. Also now, since we clear the event code much later in the work thread, allow for the possibility that the rport may have become READY again via incoming PLOGI, and if so, queue another event to handle that. In the problem scenario, the second LOGO received will cause the LOGO event to occur again. Reported-by: Bhanu Gollapudi <bprakash@broadcom.com> Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-06-12 03:44:51 +04:00
* @flags: STARTED, REC and RETRY_SUPPORTED flags
* @max_seq: Maximum number of concurrent sequences
* @disc_id: The discovery identifier
* @maxframe_size: The maximum frame size
* @retries: The retry count for the current state
* @major_retries: The retry count for the entire PLOGI/PRLI state machine
* @e_d_tov: Error detect timeout value (in msec)
* @r_a_tov: Resource allocation timeout value (in msec)
* @rp_mutex: The mutex that protects the remote port
* @retry_work: Handle for retries
* @event_callback: Callback when READY, FAILED or LOGO states complete
* @prli_count: Count of open PRLI sessions in providers
* @rcu: Structure used for freeing in an RCU-safe manner
*/
struct fc_rport_priv {
struct fc_lport *local_port;
struct fc_rport *rport;
struct kref kref;
enum fc_rport_state rp_state;
struct fc_rport_identifiers ids;
u16 flags;
u16 max_seq;
u16 disc_id;
u16 maxframe_size;
unsigned int retries;
unsigned int major_retries;
unsigned int e_d_tov;
unsigned int r_a_tov;
struct mutex rp_mutex;
struct delayed_work retry_work;
enum fc_rport_event event;
struct fc_rport_operations *ops;
struct list_head peers;
struct work_struct event_work;
u32 supported_classes;
u16 prli_count;
struct rcu_head rcu;
u16 sp_features;
u8 spp_type;
void (*lld_event_callback)(struct fc_lport *,
struct fc_rport_priv *,
enum fc_rport_event);
};
/**
* struct fcoe_dev_stats - fcoe stats structure
* @SecondsSinceLastReset: Seconds since the last reset
* @TxFrames: Number of transmitted frames
* @TxWords: Number of transmitted words
* @RxFrames: Number of received frames
* @RxWords: Number of received words
* @ErrorFrames: Number of received error frames
* @DumpedFrames: Number of dumped frames
* @LinkFailureCount: Number of link failures
* @LossOfSignalCount: Number for signal losses
* @InvalidTxWordCount: Number of invalid transmitted words
* @InvalidCRCCount: Number of invalid CRCs
* @InputRequests: Number of input requests
* @OutputRequests: Number of output requests
* @ControlRequests: Number of control requests
* @InputBytes: Number of received bytes
* @OutputBytes: Number of transmitted bytes
* @VLinkFailureCount: Number of virtual link failures
* @MissDiscAdvCount: Number of missing FIP discovery advertisement
*/
struct fcoe_dev_stats {
u64 SecondsSinceLastReset;
u64 TxFrames;
u64 TxWords;
u64 RxFrames;
u64 RxWords;
u64 ErrorFrames;
u64 DumpedFrames;
u64 LinkFailureCount;
u64 LossOfSignalCount;
u64 InvalidTxWordCount;
u64 InvalidCRCCount;
u64 InputRequests;
u64 OutputRequests;
u64 ControlRequests;
u64 InputBytes;
u64 OutputBytes;
u64 VLinkFailureCount;
u64 MissDiscAdvCount;
};
/**
* struct fc_seq_els_data - ELS data used for passing ELS specific responses
* @reason: The reason for rejection
* @explan: The explanation of the rejection
*
* Mainly used by the exchange manager layer.
*/
struct fc_seq_els_data {
enum fc_els_rjt_reason reason;
enum fc_els_rjt_explan explan;
};
/**
* struct fc_fcp_pkt - FCP request structure (one for each scsi_cmnd request)
* @lp: The associated local port
* @state: The state of the I/O
* @ref_cnt: Reference count
* @scsi_pkt_lock: Lock to protect the SCSI packet (must be taken before the
* host_lock if both are to be held at the same time)
* @cmd: The SCSI command (set and clear with the host_lock held)
* @list: Tracks queued commands (accessed with the host_lock held)
* @timer: The command timer
* @tm_done: Completion indicator
* @wait_for_comp: Indicator to wait for completion of the I/O (in jiffies)
* @data_len: The length of the data
* @cdb_cmd: The CDB command
* @xfer_len: The transfer length
* @xfer_ddp: Indicates if this transfer used DDP (XID of the exchange
* will be set here if DDP was setup)
* @xfer_contig_end: The offset into the buffer if the buffer is contiguous
* (Tx and Rx)
* @max_payload: The maximum payload size (in bytes)
* @io_status: SCSI result (upper 24 bits)
* @cdb_status: CDB status
* @status_code: FCP I/O status
* @scsi_comp_flags: Completion flags (bit 3 Underrun bit 2: overrun)
* @req_flags: Request flags (bit 0: read bit:1 write)
* @scsi_resid: SCSI residule length
* @rport: The remote port that the SCSI command is targeted at
* @seq_ptr: The sequence that will carry the SCSI command
* @recov_retry: Number of recovery retries
* @recov_seq: The sequence for REC or SRR
*/
struct fc_fcp_pkt {
spinlock_t scsi_pkt_lock;
atomic_t ref_cnt;
/* SCSI command and data transfer information */
u32 data_len;
/* SCSI I/O related information */
struct scsi_cmnd *cmd;
struct list_head list;
/* Housekeeping information */
struct fc_lport *lp;
u8 state;
/* SCSI/FCP return status */
u8 cdb_status;
u8 status_code;
u8 scsi_comp_flags;
u32 io_status;
u32 req_flags;
u32 scsi_resid;
/* Transport related veriables */
size_t xfer_len;
struct fcp_cmnd cdb_cmd;
u32 xfer_contig_end;
u16 max_payload;
u16 xfer_ddp;
/* Associated structures */
struct fc_rport *rport;
struct fc_seq *seq_ptr;
/* Timeout/error related information */
struct timer_list timer;
int wait_for_comp;
u32 recov_retry;
struct fc_seq *recov_seq;
struct completion tm_done;
} ____cacheline_aligned_in_smp;
/*
* Structure and function definitions for managing Fibre Channel Exchanges
* and Sequences
*
* fc_exch holds state for one exchange and links to its active sequence.
*
* fc_seq holds the state for an individual sequence.
*/
struct fc_exch_mgr;
struct fc_exch_mgr_anchor;
extern u16 fc_cpu_mask; /* cpu mask for possible cpus */
/**
* struct fc_seq - FC sequence
* @id: The sequence ID
* @ssb_stat: Status flags for the sequence status block (SSB)
* @cnt: Number of frames sent so far
* @rec_data: FC-4 value for REC
*/
struct fc_seq {
u8 id;
u16 ssb_stat;
u16 cnt;
u32 rec_data;
};
#define FC_EX_DONE (1 << 0) /* ep is completed */
#define FC_EX_RST_CLEANUP (1 << 1) /* reset is forcing completion */
/**
* struct fc_exch - Fibre Channel Exchange
* @em: Exchange manager
* @pool: Exchange pool
* @state: The exchange's state
* @xid: The exchange ID
* @ex_list: Handle used by the EM to track free exchanges
* @ex_lock: Lock that protects the exchange
* @ex_refcnt: Reference count
* @timeout_work: Handle for timeout handler
* @lp: The local port that this exchange is on
* @oxid: Originator's exchange ID
* @rxid: Responder's exchange ID
* @oid: Originator's FCID
* @sid: Source FCID
* @did: Destination FCID
* @esb_stat: ESB exchange status
* @r_a_tov: Resouce allocation time out value (in msecs)
* @seq_id: The next sequence ID to use
* @encaps: encapsulation information for lower-level driver
* @f_ctl: F_CTL flags for the sequence
* @fh_type: The frame type
* @class: The class of service
* @seq: The sequence in use on this exchange
* @resp: Callback for responses on this exchange
* @destructor: Called when destroying the exchange
* @arg: Passed as a void pointer to the resp() callback
*
* Locking notes: The ex_lock protects following items:
* state, esb_stat, f_ctl, seq.ssb_stat
* seq_id
* sequence allocation
*/
struct fc_exch {
spinlock_t ex_lock;
atomic_t ex_refcnt;
enum fc_class class;
struct fc_exch_mgr *em;
struct fc_exch_pool *pool;
struct list_head ex_list;
struct fc_lport *lp;
u32 esb_stat;
u8 state;
u8 fh_type;
u8 seq_id;
u8 encaps;
u16 xid;
u16 oxid;
u16 rxid;
u32 oid;
u32 sid;
u32 did;
u32 r_a_tov;
u32 f_ctl;
struct fc_seq seq;
void (*resp)(struct fc_seq *, struct fc_frame *, void *);
void *arg;
void (*destructor)(struct fc_seq *, void *);
struct delayed_work timeout_work;
} ____cacheline_aligned_in_smp;
#define fc_seq_exch(sp) container_of(sp, struct fc_exch, seq)
struct libfc_function_template {
/*
* Interface to send a FC frame
*
* STATUS: REQUIRED
*/
int (*frame_send)(struct fc_lport *, struct fc_frame *);
/*
* Interface to send ELS/CT frames
*
* STATUS: OPTIONAL
*/
struct fc_seq *(*elsct_send)(struct fc_lport *, u32 did,
struct fc_frame *, unsigned int op,
void (*resp)(struct fc_seq *,
struct fc_frame *, void *arg),
void *arg, u32 timer_msec);
/*
* Send the FC frame payload using a new exchange and sequence.
*
* The exchange response handler is set in this routine to resp()
* function pointer. It can be called in two scenarios: if a timeout
* occurs or if a response frame is received for the exchange. The
* fc_frame pointer in response handler will also indicate timeout
* as error using IS_ERR related macros.
*
* The exchange destructor handler is also set in this routine.
* The destructor handler is invoked by EM layer when exchange
* is about to free, this can be used by caller to free its
* resources along with exchange free.
*
* The arg is passed back to resp and destructor handler.
*
* The timeout value (in msec) for an exchange is set if non zero
* timer_msec argument is specified. The timer is canceled when
* it fires or when the exchange is done. The exchange timeout handler
* is registered by EM layer.
*
* STATUS: OPTIONAL
*/
struct fc_seq *(*exch_seq_send)(struct fc_lport *, struct fc_frame *,
void (*resp)(struct fc_seq *,
struct fc_frame *,
void *),
void (*destructor)(struct fc_seq *,
void *),
void *, unsigned int timer_msec);
/*
* Sets up the DDP context for a given exchange id on the given
* scatterlist if LLD supports DDP for large receive.
*
* STATUS: OPTIONAL
*/
int (*ddp_setup)(struct fc_lport *, u16, struct scatterlist *,
unsigned int);
/*
* Completes the DDP transfer and returns the length of data DDPed
* for the given exchange id.
*
* STATUS: OPTIONAL
*/
int (*ddp_done)(struct fc_lport *, u16);
/*
* Sets up the DDP context for a given exchange id on the given
* scatterlist if LLD supports DDP for FCoE target.
*
* STATUS: OPTIONAL
*/
int (*ddp_target)(struct fc_lport *, u16, struct scatterlist *,
unsigned int);
/*
* Allow LLD to fill its own Link Error Status Block
*
* STATUS: OPTIONAL
*/
void (*get_lesb)(struct fc_lport *, struct fc_els_lesb *lesb);
/*
* Send a frame using an existing sequence and exchange.
*
* STATUS: OPTIONAL
*/
int (*seq_send)(struct fc_lport *, struct fc_seq *,
struct fc_frame *);
/*
* Send an ELS response using information from the received frame.
*
* STATUS: OPTIONAL
*/
void (*seq_els_rsp_send)(struct fc_frame *, enum fc_els_cmd,
struct fc_seq_els_data *);
/*
* Abort an exchange and sequence. Generally called because of a
* exchange timeout or an abort from the upper layer.
*
* A timer_msec can be specified for abort timeout, if non-zero
* timer_msec value is specified then exchange resp handler
* will be called with timeout error if no response to abort.
*
* STATUS: OPTIONAL
*/
int (*seq_exch_abort)(const struct fc_seq *,
unsigned int timer_msec);
/*
* Indicate that an exchange/sequence tuple is complete and the memory
* allocated for the related objects may be freed.
*
* STATUS: OPTIONAL
*/
void (*exch_done)(struct fc_seq *);
/*
* Start a new sequence on the same exchange/sequence tuple.
*
* STATUS: OPTIONAL
*/
struct fc_seq *(*seq_start_next)(struct fc_seq *);
/*
* Set a response handler for the exchange of the sequence.
*
* STATUS: OPTIONAL
*/
void (*seq_set_resp)(struct fc_seq *sp,
void (*resp)(struct fc_seq *, struct fc_frame *,
void *),
void *arg);
/*
* Assign a sequence for an incoming request frame.
*
* STATUS: OPTIONAL
*/
struct fc_seq *(*seq_assign)(struct fc_lport *, struct fc_frame *);
/*
* Release the reference on the sequence returned by seq_assign().
*
* STATUS: OPTIONAL
*/
void (*seq_release)(struct fc_seq *);
/*
* Reset an exchange manager, completing all sequences and exchanges.
* If s_id is non-zero, reset only exchanges originating from that FID.
* If d_id is non-zero, reset only exchanges sending to that FID.
*
* STATUS: OPTIONAL
*/
void (*exch_mgr_reset)(struct fc_lport *, u32 s_id, u32 d_id);
/*
* Flush the rport work queue. Generally used before shutdown.
*
* STATUS: OPTIONAL
*/
void (*rport_flush_queue)(void);
/*
* Receive a frame for a local port.
*
* STATUS: OPTIONAL
*/
void (*lport_recv)(struct fc_lport *, struct fc_frame *);
/*
* Reset the local port.
*
* STATUS: OPTIONAL
*/
int (*lport_reset)(struct fc_lport *);
/*
* Set the local port FC_ID.
*
* This may be provided by the LLD to allow it to be
* notified when the local port is assigned a FC-ID.
*
* The frame, if non-NULL, is the incoming frame with the
* FLOGI LS_ACC or FLOGI, and may contain the granted MAC
* address for the LLD. The frame pointer may be NULL if
* no MAC is associated with this assignment (LOGO or PLOGI).
*
* If FC_ID is non-zero, r_a_tov and e_d_tov must be valid.
*
* Note: this is called with the local port mutex held.
*
* STATUS: OPTIONAL
*/
void (*lport_set_port_id)(struct fc_lport *, u32 port_id,
struct fc_frame *);
/*
* Create a remote port with a given port ID
*
* STATUS: OPTIONAL
*/
struct fc_rport_priv *(*rport_create)(struct fc_lport *, u32);
/*
* Initiates the RP state machine. It is called from the LP module.
* This function will issue the following commands to the N_Port
* identified by the FC ID provided.
*
* - PLOGI
* - PRLI
* - RTV
*
* STATUS: OPTIONAL
*/
int (*rport_login)(struct fc_rport_priv *);
/*
* Logoff, and remove the rport from the transport if
* it had been added. This will send a LOGO to the target.
*
* STATUS: OPTIONAL
*/
int (*rport_logoff)(struct fc_rport_priv *);
/*
* Receive a request from a remote port.
*
* STATUS: OPTIONAL
*/
void (*rport_recv_req)(struct fc_lport *, struct fc_frame *);
/*
* lookup an rport by it's port ID.
*
* STATUS: OPTIONAL
*/
struct fc_rport_priv *(*rport_lookup)(const struct fc_lport *, u32);
/*
* Destroy an rport after final kref_put().
* The argument is a pointer to the kref inside the fc_rport_priv.
*/
void (*rport_destroy)(struct kref *);
/*
* Callback routine after the remote port is logged in
*
* STATUS: OPTIONAL
*/
void (*rport_event_callback)(struct fc_lport *,
struct fc_rport_priv *,
enum fc_rport_event);
/*
* Send a fcp cmd from fsp pkt.
* Called with the SCSI host lock unlocked and irqs disabled.
*
* The resp handler is called when FCP_RSP received.
*
* STATUS: OPTIONAL
*/
int (*fcp_cmd_send)(struct fc_lport *, struct fc_fcp_pkt *,
void (*resp)(struct fc_seq *, struct fc_frame *,
void *));
/*
* Cleanup the FCP layer, used during link down and reset
*
* STATUS: OPTIONAL
*/
void (*fcp_cleanup)(struct fc_lport *);
/*
* Abort all I/O on a local port
*
* STATUS: OPTIONAL
*/
void (*fcp_abort_io)(struct fc_lport *);
/*
* Receive a request for the discovery layer.
*
* STATUS: OPTIONAL
*/
void (*disc_recv_req)(struct fc_lport *, struct fc_frame *);
/*
* Start discovery for a local port.
*
* STATUS: OPTIONAL
*/
void (*disc_start)(void (*disc_callback)(struct fc_lport *,
enum fc_disc_event),
struct fc_lport *);
/*
* Stop discovery for a given lport. This will remove
* all discovered rports
*
* STATUS: OPTIONAL
*/
void (*disc_stop) (struct fc_lport *);
/*
* Stop discovery for a given lport. This will block
* until all discovered rports are deleted from the
* FC transport class
*
* STATUS: OPTIONAL
*/
void (*disc_stop_final) (struct fc_lport *);
};
/**
* struct fc_disc - Discovery context
* @retry_count: Number of retries
* @pending: 1 if discovery is pending, 0 if not
* @requested: 1 if discovery has been requested, 0 if not
* @seq_count: Number of sequences used for discovery
* @buf_len: Length of the discovery buffer
* @disc_id: Discovery ID
* @rports: List of discovered remote ports
* @priv: Private pointer for use by discovery code
* @disc_mutex: Mutex that protects the discovery context
* @partial_buf: Partial name buffer (if names are returned
* in multiple frames)
* @disc_work: handle for delayed work context
* @disc_callback: Callback routine called when discovery completes
*/
struct fc_disc {
unsigned char retry_count;
unsigned char pending;
unsigned char requested;
unsigned short seq_count;
unsigned char buf_len;
u16 disc_id;
struct list_head rports;
void *priv;
struct mutex disc_mutex;
struct fc_gpn_ft_resp partial_buf;
struct delayed_work disc_work;
void (*disc_callback)(struct fc_lport *,
enum fc_disc_event);
};
/*
* Local port notifier and events.
*/
extern struct blocking_notifier_head fc_lport_notifier_head;
enum fc_lport_event {
FC_LPORT_EV_ADD,
FC_LPORT_EV_DEL,
};
/**
* struct fc_lport - Local port
* @host: The SCSI host associated with a local port
* @ema_list: Exchange manager anchor list
* @dns_rdata: The directory server remote port
* @ms_rdata: The management server remote port
* @ptp_rdata: Point to point remote port
* @scsi_priv: FCP layer internal data
* @disc: Discovery context
* @vports: Child vports if N_Port
* @vport: Parent vport if VN_Port
* @tt: Libfc function template
* @link_up: Link state (1 = link up, 0 = link down)
* @qfull: Queue state (1 queue is full, 0 queue is not full)
* @state: Identifies the state
* @boot_time: Timestamp indicating when the local port came online
* @host_stats: SCSI host statistics
* @dev_stats: FCoE device stats (TODO: libfc should not be
* FCoE aware)
* @retry_count: Number of retries in the current state
* @port_id: FC Port ID
* @wwpn: World Wide Port Name
* @wwnn: World Wide Node Name
* @service_params: Common service parameters
* @e_d_tov: Error detection timeout value
* @r_a_tov: Resouce allocation timeout value
* @rnid_gen: RNID information
* @sg_supp: Indicates if scatter gather is supported
* @seq_offload: Indicates if sequence offload is supported
* @crc_offload: Indicates if CRC offload is supported
* @lro_enabled: Indicates if large receive offload is supported
* @does_npiv: Supports multiple vports
* @npiv_enabled: Switch/fabric allows NPIV
* @mfs: The maximum Fibre Channel payload size
* @max_retry_count: The maximum retry attempts
* @max_rport_retry_count: The maximum remote port retry attempts
* @rport_priv_size: Size needed by driver after struct fc_rport_priv
* @lro_xid: The maximum XID for LRO
* @lso_max: The maximum large offload send size
* @fcts: FC-4 type mask
* @lp_mutex: Mutex to protect the local port
* @list: Linkage on list of vport peers
* @retry_work: Handle to local port for delayed retry context
* @prov: Pointers available for use by passive FC-4 providers
* @lport_list: Linkage on module-wide list of local ports
*/
struct fc_lport {
/* Associations */
struct Scsi_Host *host;
struct list_head ema_list;
struct fc_rport_priv *dns_rdata;
struct fc_rport_priv *ms_rdata;
struct fc_rport_priv *ptp_rdata;
void *scsi_priv;
struct fc_disc disc;
/* Virtual port information */
struct list_head vports;
struct fc_vport *vport;
/* Operational Information */
struct libfc_function_template tt;
u8 link_up;
u8 qfull;
enum fc_lport_state state;
unsigned long boot_time;
struct fc_host_statistics host_stats;
struct fcoe_dev_stats __percpu *dev_stats;
u8 retry_count;
/* Fabric information */
u32 port_id;
u64 wwpn;
u64 wwnn;
unsigned int service_params;
unsigned int e_d_tov;
unsigned int r_a_tov;
struct fc_els_rnid_gen rnid_gen;
/* Capabilities */
u32 sg_supp:1;
u32 seq_offload:1;
u32 crc_offload:1;
u32 lro_enabled:1;
u32 does_npiv:1;
u32 npiv_enabled:1;
u32 point_to_multipoint:1;
u32 fdmi_enabled:1;
u32 mfs;
u8 max_retry_count;
u8 max_rport_retry_count;
u16 rport_priv_size;
u16 link_speed;
u16 link_supported_speeds;
u16 lro_xid;
unsigned int lso_max;
struct fc_ns_fts fcts;
/* Miscellaneous */
struct mutex lp_mutex;
struct list_head list;
struct delayed_work retry_work;
void *prov[FC_FC4_PROV_SIZE];
struct list_head lport_list;
};
/**
* struct fc4_prov - FC-4 provider registration
* @prli: Handler for incoming PRLI
* @prlo: Handler for session reset
* @recv: Handler for incoming request
* @module: Pointer to module. May be NULL.
*/
struct fc4_prov {
int (*prli)(struct fc_rport_priv *, u32 spp_len,
const struct fc_els_spp *spp_in,
struct fc_els_spp *spp_out);
void (*prlo)(struct fc_rport_priv *);
void (*recv)(struct fc_lport *, struct fc_frame *);
struct module *module;
};
/*
* Register FC-4 provider with libfc.
*/
int fc_fc4_register_provider(enum fc_fh_type type, struct fc4_prov *);
void fc_fc4_deregister_provider(enum fc_fh_type type, struct fc4_prov *);
/*
* FC_LPORT HELPER FUNCTIONS
*****************************/
/**
* fc_lport_test_ready() - Determine if a local port is in the READY state
* @lport: The local port to test
*/
static inline int fc_lport_test_ready(struct fc_lport *lport)
{
return lport->state == LPORT_ST_READY;
}
/**
* fc_set_wwnn() - Set the World Wide Node Name of a local port
* @lport: The local port whose WWNN is to be set
* @wwnn: The new WWNN
*/
static inline void fc_set_wwnn(struct fc_lport *lport, u64 wwnn)
{
lport->wwnn = wwnn;
}
/**
* fc_set_wwpn() - Set the World Wide Port Name of a local port
* @lport: The local port whose WWPN is to be set
* @wwnn: The new WWPN
*/
static inline void fc_set_wwpn(struct fc_lport *lport, u64 wwnn)
{
lport->wwpn = wwnn;
}
/**
* fc_lport_state_enter() - Change a local port's state
* @lport: The local port whose state is to change
* @state: The new state
*/
static inline void fc_lport_state_enter(struct fc_lport *lport,
enum fc_lport_state state)
{
if (state != lport->state)
lport->retry_count = 0;
lport->state = state;
}
/**
* fc_lport_init_stats() - Allocate per-CPU statistics for a local port
* @lport: The local port whose statistics are to be initialized
*/
static inline int fc_lport_init_stats(struct fc_lport *lport)
{
lport->dev_stats = alloc_percpu(struct fcoe_dev_stats);
if (!lport->dev_stats)
return -ENOMEM;
return 0;
}
/**
* fc_lport_free_stats() - Free memory for a local port's statistics
* @lport: The local port whose statistics are to be freed
*/
static inline void fc_lport_free_stats(struct fc_lport *lport)
{
free_percpu(lport->dev_stats);
}
/**
* lport_priv() - Return the private data from a local port
* @lport: The local port whose private data is to be retreived
*/
static inline void *lport_priv(const struct fc_lport *lport)
{
return (void *)(lport + 1);
}
/**
* libfc_host_alloc() - Allocate a Scsi_Host with room for a local port and
* LLD private data
* @sht: The SCSI host template
* @priv_size: Size of private data
*
* Returns: libfc lport
*/
static inline struct fc_lport *
libfc_host_alloc(struct scsi_host_template *sht, int priv_size)
{
struct fc_lport *lport;
struct Scsi_Host *shost;
shost = scsi_host_alloc(sht, sizeof(*lport) + priv_size);
if (!shost)
return NULL;
lport = shost_priv(shost);
lport->host = shost;
INIT_LIST_HEAD(&lport->ema_list);
INIT_LIST_HEAD(&lport->vports);
return lport;
}
/*
* FC_FCP HELPER FUNCTIONS
*****************************/
static inline bool fc_fcp_is_read(const struct fc_fcp_pkt *fsp)
{
if (fsp && fsp->cmd)
return fsp->cmd->sc_data_direction == DMA_FROM_DEVICE;
return false;
}
/*
* LOCAL PORT LAYER
*****************************/
int fc_lport_init(struct fc_lport *);
int fc_lport_destroy(struct fc_lport *);
int fc_fabric_logoff(struct fc_lport *);
int fc_fabric_login(struct fc_lport *);
void __fc_linkup(struct fc_lport *);
void fc_linkup(struct fc_lport *);
void __fc_linkdown(struct fc_lport *);
void fc_linkdown(struct fc_lport *);
void fc_vport_setlink(struct fc_lport *);
void fc_vports_linkchange(struct fc_lport *);
int fc_lport_config(struct fc_lport *);
int fc_lport_reset(struct fc_lport *);
int fc_set_mfs(struct fc_lport *, u32 mfs);
struct fc_lport *libfc_vport_create(struct fc_vport *, int privsize);
struct fc_lport *fc_vport_id_lookup(struct fc_lport *, u32 port_id);
int fc_lport_bsg_request(struct fc_bsg_job *);
void fc_lport_set_local_id(struct fc_lport *, u32 port_id);
void fc_lport_iterate(void (*func)(struct fc_lport *, void *), void *);
/*
* REMOTE PORT LAYER
*****************************/
int fc_rport_init(struct fc_lport *);
void fc_rport_terminate_io(struct fc_rport *);
/*
* DISCOVERY LAYER
*****************************/
int fc_disc_init(struct fc_lport *);
static inline struct fc_lport *fc_disc_lport(struct fc_disc *disc)
{
return container_of(disc, struct fc_lport, disc);
}
/*
* FCP LAYER
*****************************/
int fc_fcp_init(struct fc_lport *);
void fc_fcp_destroy(struct fc_lport *);
/*
* SCSI INTERACTION LAYER
*****************************/
int fc_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
int fc_eh_abort(struct scsi_cmnd *);
int fc_eh_device_reset(struct scsi_cmnd *);
int fc_eh_host_reset(struct scsi_cmnd *);
int fc_slave_alloc(struct scsi_device *);
int fc_change_queue_depth(struct scsi_device *, int qdepth, int reason);
int fc_change_queue_type(struct scsi_device *, int tag_type);
/*
* ELS/CT interface
*****************************/
int fc_elsct_init(struct fc_lport *);
struct fc_seq *fc_elsct_send(struct fc_lport *, u32 did,
struct fc_frame *,
unsigned int op,
void (*resp)(struct fc_seq *,
struct fc_frame *,
void *arg),
void *arg, u32 timer_msec);
void fc_lport_flogi_resp(struct fc_seq *, struct fc_frame *, void *);
void fc_lport_logo_resp(struct fc_seq *, struct fc_frame *, void *);
void fc_fill_reply_hdr(struct fc_frame *, const struct fc_frame *,
enum fc_rctl, u32 parm_offset);
void fc_fill_hdr(struct fc_frame *, const struct fc_frame *,
enum fc_rctl, u32 f_ctl, u16 seq_cnt, u32 parm_offset);
/*
* EXCHANGE MANAGER LAYER
*****************************/
int fc_exch_init(struct fc_lport *);
struct fc_exch_mgr_anchor *fc_exch_mgr_add(struct fc_lport *,
struct fc_exch_mgr *,
bool (*match)(struct fc_frame *));
void fc_exch_mgr_del(struct fc_exch_mgr_anchor *);
int fc_exch_mgr_list_clone(struct fc_lport *src, struct fc_lport *dst);
struct fc_exch_mgr *fc_exch_mgr_alloc(struct fc_lport *, enum fc_class class,
u16 min_xid, u16 max_xid,
[SCSI] fcoe, fnic, libfc: modifies current code paths to use EM anchor list Modifies current code to use EM anchor list in EM allocation, EM free, EM reset, exch allocation and exch lookup code paths. 1. Modifies fc_exch_mgr_alloc to accept EM match function and then have allocated EM added to the lport using fc_exch_mgr_add API while also updating EM kref for newly added EM. 2. Updates fc_exch_mgr_free API to accept only lport pointer instead EM and then have this API free all EMs of the lport from EM anchor list. 3. Removes single lport pointer link from the EM, which was used in associating lport pointer in newly allocated exchange. Instead have lport pointer passed along new exchange allocation call path and then store passed lport pointer in newly allocated exchange, this will allow a single EM instance to be used across more than one lport and used in EM reset to reset only lport specific exchanges. 4. Modifies fc_exch_mgr_reset to reset all EMs from the EM anchor list of the lport, adds additional exch lport pointer (ep->lp) check for shared EM case to reset exchange specific to a lport requested reset. 5. Updates exch allocation API fc_exch_alloc to use EM anchor list and its anchor match func pointer. The fc_exch_alloc will walk the list of EMs until it finds a match, a match will be either null match func pointer or call to match function returning true value. 6. Updates fc_exch_recv to accept incoming frame on local port using only lport pointer and frame pointer without specifying EM instance of incoming frame. Instead modified fc_exch_recv to locate EM for the incoming frame by matching xid of incoming frame against a EM xid range. This change was required to use EM list in libfc Rx path and after this change the lport fc_exch_mgr pointer emp is not needed anymore, so removed emp pointer. 7. Updates fnic for removed lport emp pointer and above modified libfc APIs fc_exch_recv, fc_exch_mgr_alloc and fc_exch_mgr_free. 8. Removes exch_get and exch_put from libfc_function_template as these are no longer needed with EM anchor list and its match function use. Also removes its default function fc_exch_get. A defect this patch introduced regarding the libfc initialization order in the fnic driver was fixed by Joe Eykholt <jeykholt@cisco.com>. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-07-30 04:05:10 +04:00
bool (*match)(struct fc_frame *));
void fc_exch_mgr_free(struct fc_lport *);
void fc_exch_recv(struct fc_lport *, struct fc_frame *);
void fc_exch_mgr_reset(struct fc_lport *, u32 s_id, u32 d_id);
/*
* Functions for fc_functions_template
*/
void fc_get_host_speed(struct Scsi_Host *);
void fc_get_host_port_state(struct Scsi_Host *);
void fc_set_rport_loss_tmo(struct fc_rport *, u32 timeout);
struct fc_host_statistics *fc_get_host_stats(struct Scsi_Host *);
#endif /* _LIBFC_H_ */