WSL2-Linux-Kernel/net/wireless/wext-sme.c

415 строки
9.2 KiB
C
Исходник Обычный вид История

/*
* cfg80211 wext compat for managed mode.
*
* Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
* Copyright (C) 2009 Intel Corporation. All rights reserved.
*/
#include <linux/export.h>
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 11:04:11 +03:00
#include <linux/slab.h>
#include <net/cfg80211.h>
#include <net/cfg80211-wext.h>
#include "wext-compat.h"
#include "nl80211.h"
int cfg80211_mgd_wext_connect(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev)
{
struct cfg80211_cached_keys *ck = NULL;
const u8 *prev_bssid = NULL;
int err, i;
ASSERT_RTNL();
ASSERT_WDEV_LOCK(wdev);
if (!netif_running(wdev->netdev))
return 0;
wdev->wext.connect.ie = wdev->wext.ie;
wdev->wext.connect.ie_len = wdev->wext.ie_len;
/* Use default background scan period */
wdev->wext.connect.bg_scan_period = -1;
if (wdev->wext.keys) {
wdev->wext.keys->def = wdev->wext.default_key;
wdev->wext.keys->defmgmt = wdev->wext.default_mgmt_key;
if (wdev->wext.default_key != -1)
wdev->wext.connect.privacy = true;
}
if (!wdev->wext.connect.ssid_len)
return 0;
if (wdev->wext.keys) {
ck = kmemdup(wdev->wext.keys, sizeof(*ck), GFP_KERNEL);
if (!ck)
return -ENOMEM;
for (i = 0; i < 6; i++)
ck->params[i].key = ck->data[i];
}
if (wdev->wext.prev_bssid_valid)
prev_bssid = wdev->wext.prev_bssid;
err = cfg80211_connect(rdev, wdev->netdev,
&wdev->wext.connect, ck, prev_bssid);
if (err)
kfree(ck);
return err;
}
int cfg80211_mgd_wext_siwfreq(struct net_device *dev,
struct iw_request_info *info,
struct iw_freq *wextfreq, char *extra)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
struct ieee80211_channel *chan = NULL;
int err, freq;
/* call only for station! */
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION))
return -EINVAL;
freq = cfg80211_wext_freq(wextfreq);
if (freq < 0)
return freq;
if (freq) {
chan = ieee80211_get_channel(wdev->wiphy, freq);
if (!chan)
return -EINVAL;
if (chan->flags & IEEE80211_CHAN_DISABLED)
return -EINVAL;
}
wdev_lock(wdev);
if (wdev->conn) {
bool event = true;
if (wdev->wext.connect.channel == chan) {
err = 0;
goto out;
}
/* if SSID set, we'll try right again, avoid event */
if (wdev->wext.connect.ssid_len)
event = false;
err = cfg80211_disconnect(rdev, dev,
WLAN_REASON_DEAUTH_LEAVING, event);
if (err)
goto out;
}
wdev->wext.connect.channel = chan;
/*
* SSID is not set, we just want to switch monitor channel,
* this is really just backward compatibility, if the SSID
* is set then we use the channel to select the BSS to use
* to connect to instead. If we were connected on another
* channel we disconnected above and reconnect below.
*/
if (chan && !wdev->wext.connect.ssid_len) {
struct cfg80211_chan_def chandef = {
.width = NL80211_CHAN_WIDTH_20_NOHT,
.center_freq1 = freq,
};
chandef.chan = ieee80211_get_channel(&rdev->wiphy, freq);
if (chandef.chan)
err = cfg80211_set_monitor_channel(rdev, &chandef);
else
err = -EINVAL;
goto out;
}
err = cfg80211_mgd_wext_connect(rdev, wdev);
out:
wdev_unlock(wdev);
return err;
}
int cfg80211_mgd_wext_giwfreq(struct net_device *dev,
struct iw_request_info *info,
struct iw_freq *freq, char *extra)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct ieee80211_channel *chan = NULL;
/* call only for station! */
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION))
return -EINVAL;
wdev_lock(wdev);
if (wdev->current_bss)
chan = wdev->current_bss->pub.channel;
else if (wdev->wext.connect.channel)
chan = wdev->wext.connect.channel;
wdev_unlock(wdev);
if (chan) {
freq->m = chan->center_freq;
freq->e = 6;
return 0;
}
/* no channel if not joining */
return -EINVAL;
}
int cfg80211_mgd_wext_siwessid(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *data, char *ssid)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
size_t len = data->length;
int err;
/* call only for station! */
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION))
return -EINVAL;
if (!data->flags)
len = 0;
/* iwconfig uses nul termination in SSID.. */
if (len > 0 && ssid[len - 1] == '\0')
len--;
wdev_lock(wdev);
err = 0;
if (wdev->conn) {
bool event = true;
if (wdev->wext.connect.ssid && len &&
len == wdev->wext.connect.ssid_len &&
memcmp(wdev->wext.connect.ssid, ssid, len) == 0)
goto out;
/* if SSID set now, we'll try to connect, avoid event */
if (len)
event = false;
err = cfg80211_disconnect(rdev, dev,
WLAN_REASON_DEAUTH_LEAVING, event);
if (err)
goto out;
}
wdev->wext.prev_bssid_valid = false;
wdev->wext.connect.ssid = wdev->wext.ssid;
memcpy(wdev->wext.ssid, ssid, len);
wdev->wext.connect.ssid_len = len;
wdev->wext.connect.crypto.control_port = false;
wdev->wext.connect.crypto.control_port_ethertype =
cpu_to_be16(ETH_P_PAE);
err = cfg80211_mgd_wext_connect(rdev, wdev);
out:
wdev_unlock(wdev);
return err;
}
int cfg80211_mgd_wext_giwessid(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *data, char *ssid)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
/* call only for station! */
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION))
return -EINVAL;
data->flags = 0;
wdev_lock(wdev);
if (wdev->current_bss) {
const u8 *ie;
rcu_read_lock();
ie = ieee80211_bss_get_ie(&wdev->current_bss->pub,
WLAN_EID_SSID);
if (ie) {
data->flags = 1;
data->length = ie[1];
memcpy(ssid, ie + 2, data->length);
}
rcu_read_unlock();
} else if (wdev->wext.connect.ssid && wdev->wext.connect.ssid_len) {
data->flags = 1;
data->length = wdev->wext.connect.ssid_len;
memcpy(ssid, wdev->wext.connect.ssid, data->length);
}
wdev_unlock(wdev);
return 0;
}
int cfg80211_mgd_wext_siwap(struct net_device *dev,
struct iw_request_info *info,
struct sockaddr *ap_addr, char *extra)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
u8 *bssid = ap_addr->sa_data;
int err;
/* call only for station! */
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION))
return -EINVAL;
if (ap_addr->sa_family != ARPHRD_ETHER)
return -EINVAL;
/* automatic mode */
if (is_zero_ether_addr(bssid) || is_broadcast_ether_addr(bssid))
bssid = NULL;
wdev_lock(wdev);
if (wdev->conn) {
err = 0;
/* both automatic */
if (!bssid && !wdev->wext.connect.bssid)
goto out;
/* fixed already - and no change */
if (wdev->wext.connect.bssid && bssid &&
ether_addr_equal(bssid, wdev->wext.connect.bssid))
goto out;
err = cfg80211_disconnect(rdev, dev,
WLAN_REASON_DEAUTH_LEAVING, false);
if (err)
goto out;
}
if (bssid) {
memcpy(wdev->wext.bssid, bssid, ETH_ALEN);
wdev->wext.connect.bssid = wdev->wext.bssid;
} else
wdev->wext.connect.bssid = NULL;
err = cfg80211_mgd_wext_connect(rdev, wdev);
out:
wdev_unlock(wdev);
return err;
}
int cfg80211_mgd_wext_giwap(struct net_device *dev,
struct iw_request_info *info,
struct sockaddr *ap_addr, char *extra)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
/* call only for station! */
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION))
return -EINVAL;
ap_addr->sa_family = ARPHRD_ETHER;
wdev_lock(wdev);
if (wdev->current_bss)
memcpy(ap_addr->sa_data, wdev->current_bss->pub.bssid, ETH_ALEN);
else
memset(ap_addr->sa_data, 0, ETH_ALEN);
wdev_unlock(wdev);
return 0;
}
int cfg80211_wext_siwgenie(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *data, char *extra)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
u8 *ie = extra;
int ie_len = data->length, err;
if (wdev->iftype != NL80211_IFTYPE_STATION)
return -EOPNOTSUPP;
if (!ie_len)
ie = NULL;
wdev_lock(wdev);
/* no change */
err = 0;
if (wdev->wext.ie_len == ie_len &&
memcmp(wdev->wext.ie, ie, ie_len) == 0)
goto out;
if (ie_len) {
ie = kmemdup(extra, ie_len, GFP_KERNEL);
if (!ie) {
err = -ENOMEM;
goto out;
}
} else
ie = NULL;
kfree(wdev->wext.ie);
wdev->wext.ie = ie;
wdev->wext.ie_len = ie_len;
if (wdev->conn) {
err = cfg80211_disconnect(rdev, dev,
WLAN_REASON_DEAUTH_LEAVING, false);
if (err)
goto out;
}
/* userspace better not think we'll reconnect */
err = 0;
out:
wdev_unlock(wdev);
return err;
}
int cfg80211_wext_siwmlme(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *data, char *extra)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct iw_mlme *mlme = (struct iw_mlme *)extra;
struct cfg80211_registered_device *rdev;
int err;
if (!wdev)
return -EOPNOTSUPP;
rdev = wiphy_to_rdev(wdev->wiphy);
if (wdev->iftype != NL80211_IFTYPE_STATION)
return -EINVAL;
if (mlme->addr.sa_family != ARPHRD_ETHER)
return -EINVAL;
wdev_lock(wdev);
switch (mlme->cmd) {
case IW_MLME_DEAUTH:
case IW_MLME_DISASSOC:
err = cfg80211_disconnect(rdev, dev, mlme->reason_code, true);
break;
default:
err = -EOPNOTSUPP;
break;
}
wdev_unlock(wdev);
return err;
}