WSL2-Linux-Kernel/drivers/perf/fsl_imx8_ddr_perf.c

796 строки
20 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2017 NXP
* Copyright 2016 Freescale Semiconductor, Inc.
*/
#include <linux/bitfield.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/perf_event.h>
#include <linux/slab.h>
#define COUNTER_CNTL 0x0
#define COUNTER_READ 0x20
#define COUNTER_DPCR1 0x30
#define CNTL_OVER 0x1
#define CNTL_CLEAR 0x2
#define CNTL_EN 0x4
#define CNTL_EN_MASK 0xFFFFFFFB
#define CNTL_CLEAR_MASK 0xFFFFFFFD
#define CNTL_OVER_MASK 0xFFFFFFFE
#define CNTL_CSV_SHIFT 24
#define CNTL_CSV_MASK (0xFF << CNTL_CSV_SHIFT)
#define EVENT_CYCLES_ID 0
#define EVENT_CYCLES_COUNTER 0
#define NUM_COUNTERS 4
#define AXI_MASKING_REVERT 0xffff0000 /* AXI_MASKING(MSB 16bits) + AXI_ID(LSB 16bits) */
#define to_ddr_pmu(p) container_of(p, struct ddr_pmu, pmu)
#define DDR_PERF_DEV_NAME "imx8_ddr"
#define DDR_CPUHP_CB_NAME DDR_PERF_DEV_NAME "_perf_pmu"
static DEFINE_IDA(ddr_ida);
/* DDR Perf hardware feature */
#define DDR_CAP_AXI_ID_FILTER 0x1 /* support AXI ID filter */
#define DDR_CAP_AXI_ID_FILTER_ENHANCED 0x3 /* support enhanced AXI ID filter */
struct fsl_ddr_devtype_data {
unsigned int quirks; /* quirks needed for different DDR Perf core */
const char *identifier; /* system PMU identifier for userspace */
};
static const struct fsl_ddr_devtype_data imx8_devtype_data;
static const struct fsl_ddr_devtype_data imx8m_devtype_data = {
.quirks = DDR_CAP_AXI_ID_FILTER,
};
static const struct fsl_ddr_devtype_data imx8mq_devtype_data = {
.quirks = DDR_CAP_AXI_ID_FILTER,
.identifier = "i.MX8MQ",
};
static const struct fsl_ddr_devtype_data imx8mm_devtype_data = {
.quirks = DDR_CAP_AXI_ID_FILTER,
.identifier = "i.MX8MM",
};
static const struct fsl_ddr_devtype_data imx8mn_devtype_data = {
.quirks = DDR_CAP_AXI_ID_FILTER,
.identifier = "i.MX8MN",
};
static const struct fsl_ddr_devtype_data imx8mp_devtype_data = {
.quirks = DDR_CAP_AXI_ID_FILTER_ENHANCED,
.identifier = "i.MX8MP",
};
static const struct of_device_id imx_ddr_pmu_dt_ids[] = {
{ .compatible = "fsl,imx8-ddr-pmu", .data = &imx8_devtype_data},
{ .compatible = "fsl,imx8m-ddr-pmu", .data = &imx8m_devtype_data},
{ .compatible = "fsl,imx8mq-ddr-pmu", .data = &imx8mq_devtype_data},
{ .compatible = "fsl,imx8mm-ddr-pmu", .data = &imx8mm_devtype_data},
{ .compatible = "fsl,imx8mn-ddr-pmu", .data = &imx8mn_devtype_data},
{ .compatible = "fsl,imx8mp-ddr-pmu", .data = &imx8mp_devtype_data},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, imx_ddr_pmu_dt_ids);
struct ddr_pmu {
struct pmu pmu;
void __iomem *base;
unsigned int cpu;
struct hlist_node node;
struct device *dev;
struct perf_event *events[NUM_COUNTERS];
int active_events;
enum cpuhp_state cpuhp_state;
const struct fsl_ddr_devtype_data *devtype_data;
int irq;
int id;
};
static ssize_t ddr_perf_identifier_show(struct device *dev,
struct device_attribute *attr,
char *page)
{
struct ddr_pmu *pmu = dev_get_drvdata(dev);
return sysfs_emit(page, "%s\n", pmu->devtype_data->identifier);
}
static umode_t ddr_perf_identifier_attr_visible(struct kobject *kobj,
struct attribute *attr,
int n)
{
struct device *dev = kobj_to_dev(kobj);
struct ddr_pmu *pmu = dev_get_drvdata(dev);
if (!pmu->devtype_data->identifier)
return 0;
return attr->mode;
};
static struct device_attribute ddr_perf_identifier_attr =
__ATTR(identifier, 0444, ddr_perf_identifier_show, NULL);
static struct attribute *ddr_perf_identifier_attrs[] = {
&ddr_perf_identifier_attr.attr,
NULL,
};
static const struct attribute_group ddr_perf_identifier_attr_group = {
.attrs = ddr_perf_identifier_attrs,
.is_visible = ddr_perf_identifier_attr_visible,
};
enum ddr_perf_filter_capabilities {
PERF_CAP_AXI_ID_FILTER = 0,
PERF_CAP_AXI_ID_FILTER_ENHANCED,
PERF_CAP_AXI_ID_FEAT_MAX,
};
static u32 ddr_perf_filter_cap_get(struct ddr_pmu *pmu, int cap)
{
u32 quirks = pmu->devtype_data->quirks;
switch (cap) {
case PERF_CAP_AXI_ID_FILTER:
return !!(quirks & DDR_CAP_AXI_ID_FILTER);
case PERF_CAP_AXI_ID_FILTER_ENHANCED:
quirks &= DDR_CAP_AXI_ID_FILTER_ENHANCED;
return quirks == DDR_CAP_AXI_ID_FILTER_ENHANCED;
default:
WARN(1, "unknown filter cap %d\n", cap);
}
return 0;
}
static ssize_t ddr_perf_filter_cap_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct ddr_pmu *pmu = dev_get_drvdata(dev);
struct dev_ext_attribute *ea =
container_of(attr, struct dev_ext_attribute, attr);
int cap = (long)ea->var;
return sysfs_emit(buf, "%u\n", ddr_perf_filter_cap_get(pmu, cap));
}
#define PERF_EXT_ATTR_ENTRY(_name, _func, _var) \
(&((struct dev_ext_attribute) { \
__ATTR(_name, 0444, _func, NULL), (void *)_var \
}).attr.attr)
#define PERF_FILTER_EXT_ATTR_ENTRY(_name, _var) \
PERF_EXT_ATTR_ENTRY(_name, ddr_perf_filter_cap_show, _var)
static struct attribute *ddr_perf_filter_cap_attr[] = {
PERF_FILTER_EXT_ATTR_ENTRY(filter, PERF_CAP_AXI_ID_FILTER),
PERF_FILTER_EXT_ATTR_ENTRY(enhanced_filter, PERF_CAP_AXI_ID_FILTER_ENHANCED),
NULL,
};
static const struct attribute_group ddr_perf_filter_cap_attr_group = {
.name = "caps",
.attrs = ddr_perf_filter_cap_attr,
};
static ssize_t ddr_perf_cpumask_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct ddr_pmu *pmu = dev_get_drvdata(dev);
return cpumap_print_to_pagebuf(true, buf, cpumask_of(pmu->cpu));
}
static struct device_attribute ddr_perf_cpumask_attr =
__ATTR(cpumask, 0444, ddr_perf_cpumask_show, NULL);
static struct attribute *ddr_perf_cpumask_attrs[] = {
&ddr_perf_cpumask_attr.attr,
NULL,
};
static const struct attribute_group ddr_perf_cpumask_attr_group = {
.attrs = ddr_perf_cpumask_attrs,
};
static ssize_t
ddr_pmu_event_show(struct device *dev, struct device_attribute *attr,
char *page)
{
struct perf_pmu_events_attr *pmu_attr;
pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr);
return sysfs_emit(page, "event=0x%02llx\n", pmu_attr->id);
}
#define IMX8_DDR_PMU_EVENT_ATTR(_name, _id) \
PMU_EVENT_ATTR_ID(_name, ddr_pmu_event_show, _id)
static struct attribute *ddr_perf_events_attrs[] = {
IMX8_DDR_PMU_EVENT_ATTR(cycles, EVENT_CYCLES_ID),
IMX8_DDR_PMU_EVENT_ATTR(selfresh, 0x01),
IMX8_DDR_PMU_EVENT_ATTR(read-accesses, 0x04),
IMX8_DDR_PMU_EVENT_ATTR(write-accesses, 0x05),
IMX8_DDR_PMU_EVENT_ATTR(read-queue-depth, 0x08),
IMX8_DDR_PMU_EVENT_ATTR(write-queue-depth, 0x09),
IMX8_DDR_PMU_EVENT_ATTR(lp-read-credit-cnt, 0x10),
IMX8_DDR_PMU_EVENT_ATTR(hp-read-credit-cnt, 0x11),
IMX8_DDR_PMU_EVENT_ATTR(write-credit-cnt, 0x12),
IMX8_DDR_PMU_EVENT_ATTR(read-command, 0x20),
IMX8_DDR_PMU_EVENT_ATTR(write-command, 0x21),
IMX8_DDR_PMU_EVENT_ATTR(read-modify-write-command, 0x22),
IMX8_DDR_PMU_EVENT_ATTR(hp-read, 0x23),
IMX8_DDR_PMU_EVENT_ATTR(hp-req-nocredit, 0x24),
IMX8_DDR_PMU_EVENT_ATTR(hp-xact-credit, 0x25),
IMX8_DDR_PMU_EVENT_ATTR(lp-req-nocredit, 0x26),
IMX8_DDR_PMU_EVENT_ATTR(lp-xact-credit, 0x27),
IMX8_DDR_PMU_EVENT_ATTR(wr-xact-credit, 0x29),
IMX8_DDR_PMU_EVENT_ATTR(read-cycles, 0x2a),
IMX8_DDR_PMU_EVENT_ATTR(write-cycles, 0x2b),
IMX8_DDR_PMU_EVENT_ATTR(read-write-transition, 0x30),
IMX8_DDR_PMU_EVENT_ATTR(precharge, 0x31),
IMX8_DDR_PMU_EVENT_ATTR(activate, 0x32),
IMX8_DDR_PMU_EVENT_ATTR(load-mode, 0x33),
IMX8_DDR_PMU_EVENT_ATTR(perf-mwr, 0x34),
IMX8_DDR_PMU_EVENT_ATTR(read, 0x35),
IMX8_DDR_PMU_EVENT_ATTR(read-activate, 0x36),
IMX8_DDR_PMU_EVENT_ATTR(refresh, 0x37),
IMX8_DDR_PMU_EVENT_ATTR(write, 0x38),
IMX8_DDR_PMU_EVENT_ATTR(raw-hazard, 0x39),
IMX8_DDR_PMU_EVENT_ATTR(axid-read, 0x41),
IMX8_DDR_PMU_EVENT_ATTR(axid-write, 0x42),
NULL,
};
static const struct attribute_group ddr_perf_events_attr_group = {
.name = "events",
.attrs = ddr_perf_events_attrs,
};
PMU_FORMAT_ATTR(event, "config:0-7");
PMU_FORMAT_ATTR(axi_id, "config1:0-15");
PMU_FORMAT_ATTR(axi_mask, "config1:16-31");
static struct attribute *ddr_perf_format_attrs[] = {
&format_attr_event.attr,
&format_attr_axi_id.attr,
&format_attr_axi_mask.attr,
NULL,
};
static const struct attribute_group ddr_perf_format_attr_group = {
.name = "format",
.attrs = ddr_perf_format_attrs,
};
static const struct attribute_group *attr_groups[] = {
&ddr_perf_events_attr_group,
&ddr_perf_format_attr_group,
&ddr_perf_cpumask_attr_group,
&ddr_perf_filter_cap_attr_group,
&ddr_perf_identifier_attr_group,
NULL,
};
static bool ddr_perf_is_filtered(struct perf_event *event)
{
return event->attr.config == 0x41 || event->attr.config == 0x42;
}
static u32 ddr_perf_filter_val(struct perf_event *event)
{
return event->attr.config1;
}
static bool ddr_perf_filters_compatible(struct perf_event *a,
struct perf_event *b)
{
if (!ddr_perf_is_filtered(a))
return true;
if (!ddr_perf_is_filtered(b))
return true;
return ddr_perf_filter_val(a) == ddr_perf_filter_val(b);
}
static bool ddr_perf_is_enhanced_filtered(struct perf_event *event)
{
unsigned int filt;
struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
filt = pmu->devtype_data->quirks & DDR_CAP_AXI_ID_FILTER_ENHANCED;
return (filt == DDR_CAP_AXI_ID_FILTER_ENHANCED) &&
ddr_perf_is_filtered(event);
}
static u32 ddr_perf_alloc_counter(struct ddr_pmu *pmu, int event)
{
int i;
/*
* Always map cycle event to counter 0
* Cycles counter is dedicated for cycle event
* can't used for the other events
*/
if (event == EVENT_CYCLES_ID) {
if (pmu->events[EVENT_CYCLES_COUNTER] == NULL)
return EVENT_CYCLES_COUNTER;
else
return -ENOENT;
}
for (i = 1; i < NUM_COUNTERS; i++) {
if (pmu->events[i] == NULL)
return i;
}
return -ENOENT;
}
static void ddr_perf_free_counter(struct ddr_pmu *pmu, int counter)
{
pmu->events[counter] = NULL;
}
static u32 ddr_perf_read_counter(struct ddr_pmu *pmu, int counter)
{
struct perf_event *event = pmu->events[counter];
void __iomem *base = pmu->base;
/*
* return bytes instead of bursts from ddr transaction for
* axid-read and axid-write event if PMU core supports enhanced
* filter.
*/
base += ddr_perf_is_enhanced_filtered(event) ? COUNTER_DPCR1 :
COUNTER_READ;
return readl_relaxed(base + counter * 4);
}
static int ddr_perf_event_init(struct perf_event *event)
{
struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
struct perf_event *sibling;
if (event->attr.type != event->pmu->type)
return -ENOENT;
if (is_sampling_event(event) || event->attach_state & PERF_ATTACH_TASK)
return -EOPNOTSUPP;
if (event->cpu < 0) {
dev_warn(pmu->dev, "Can't provide per-task data!\n");
return -EOPNOTSUPP;
}
/*
* We must NOT create groups containing mixed PMUs, although software
* events are acceptable (for example to create a CCN group
* periodically read when a hrtimer aka cpu-clock leader triggers).
*/
if (event->group_leader->pmu != event->pmu &&
!is_software_event(event->group_leader))
return -EINVAL;
if (pmu->devtype_data->quirks & DDR_CAP_AXI_ID_FILTER) {
if (!ddr_perf_filters_compatible(event, event->group_leader))
return -EINVAL;
for_each_sibling_event(sibling, event->group_leader) {
if (!ddr_perf_filters_compatible(event, sibling))
return -EINVAL;
}
}
for_each_sibling_event(sibling, event->group_leader) {
if (sibling->pmu != event->pmu &&
!is_software_event(sibling))
return -EINVAL;
}
event->cpu = pmu->cpu;
hwc->idx = -1;
return 0;
}
static void ddr_perf_counter_enable(struct ddr_pmu *pmu, int config,
int counter, bool enable)
{
u8 reg = counter * 4 + COUNTER_CNTL;
int val;
if (enable) {
/*
* cycle counter is special which should firstly write 0 then
* write 1 into CLEAR bit to clear it. Other counters only
* need write 0 into CLEAR bit and it turns out to be 1 by
* hardware. Below enable flow is harmless for all counters.
*/
writel(0, pmu->base + reg);
val = CNTL_EN | CNTL_CLEAR;
val |= FIELD_PREP(CNTL_CSV_MASK, config);
writel(val, pmu->base + reg);
} else {
/* Disable counter */
val = readl_relaxed(pmu->base + reg) & CNTL_EN_MASK;
writel(val, pmu->base + reg);
}
}
perf/imx_ddr: Add stop event counters support for i.MX8MP DDR Perf driver only supports free-running event counters(counter1/2/3) now, this patch adds support for stop event counters. Legacy SoCs: Cycle counter(counter0) is a special counter, only count cycles. When cycle counter overflow, it will lock all counters and generate an interrupt. In ddr_perf_irq_handler, disable cycle counter then all counters would stop at the same time, update all counters' count, then enable cycle counter that all counters count again. During this process, only clear cycle counter, no need to clear event counters since they are free-running counters. They would continue counting after overflow and do/while loop from ddr_perf_event_update can handle event counters overflow case. i.MX8MP: Almost all is the same as legacy SoCs, the only difference is that, event counters are not free-running any more. Like cycle counter, when event counters overflow, they would stop counting unless clear the counter, and no interrupt generate for event counters. So we should clear event counters that let them re-count when cycle counter overflow, which ensure event counters will not lose data. This patch adds stop event counters support which would be compatible to free-running event counters. We use the cycle counter to stop overflow of the event counters. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20201027104451.15434-1-qiangqing.zhang@nxp.com Signed-off-by: Will Deacon <will@kernel.org>
2020-10-27 13:44:51 +03:00
static bool ddr_perf_counter_overflow(struct ddr_pmu *pmu, int counter)
{
int val;
val = readl_relaxed(pmu->base + counter * 4 + COUNTER_CNTL);
return val & CNTL_OVER;
}
static void ddr_perf_counter_clear(struct ddr_pmu *pmu, int counter)
{
u8 reg = counter * 4 + COUNTER_CNTL;
int val;
val = readl_relaxed(pmu->base + reg);
val &= ~CNTL_CLEAR;
writel(val, pmu->base + reg);
val |= CNTL_CLEAR;
writel(val, pmu->base + reg);
}
static void ddr_perf_event_update(struct perf_event *event)
{
struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
u64 new_raw_count;
int counter = hwc->idx;
int ret;
new_raw_count = ddr_perf_read_counter(pmu, counter);
local64_add(new_raw_count, &event->count);
/*
* For legacy SoCs: event counter continue counting when overflow,
* no need to clear the counter.
* For new SoCs: event counter stop counting when overflow, need
* clear counter to let it count again.
*/
if (counter != EVENT_CYCLES_COUNTER) {
ret = ddr_perf_counter_overflow(pmu, counter);
if (ret)
dev_warn_ratelimited(pmu->dev, "events lost due to counter overflow (config 0x%llx)\n",
event->attr.config);
}
/* clear counter every time for both cycle counter and event counter */
ddr_perf_counter_clear(pmu, counter);
}
static void ddr_perf_event_start(struct perf_event *event, int flags)
{
struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
int counter = hwc->idx;
local64_set(&hwc->prev_count, 0);
ddr_perf_counter_enable(pmu, event->attr.config, counter, true);
hwc->state = 0;
}
static int ddr_perf_event_add(struct perf_event *event, int flags)
{
struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
int counter;
int cfg = event->attr.config;
int cfg1 = event->attr.config1;
if (pmu->devtype_data->quirks & DDR_CAP_AXI_ID_FILTER) {
int i;
for (i = 1; i < NUM_COUNTERS; i++) {
if (pmu->events[i] &&
!ddr_perf_filters_compatible(event, pmu->events[i]))
return -EINVAL;
}
if (ddr_perf_is_filtered(event)) {
/* revert axi id masking(axi_mask) value */
cfg1 ^= AXI_MASKING_REVERT;
writel(cfg1, pmu->base + COUNTER_DPCR1);
}
}
counter = ddr_perf_alloc_counter(pmu, cfg);
if (counter < 0) {
dev_dbg(pmu->dev, "There are not enough counters\n");
return -EOPNOTSUPP;
}
pmu->events[counter] = event;
pmu->active_events++;
hwc->idx = counter;
hwc->state |= PERF_HES_STOPPED;
if (flags & PERF_EF_START)
ddr_perf_event_start(event, flags);
return 0;
}
static void ddr_perf_event_stop(struct perf_event *event, int flags)
{
struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
int counter = hwc->idx;
ddr_perf_counter_enable(pmu, event->attr.config, counter, false);
ddr_perf_event_update(event);
hwc->state |= PERF_HES_STOPPED;
}
static void ddr_perf_event_del(struct perf_event *event, int flags)
{
struct ddr_pmu *pmu = to_ddr_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
int counter = hwc->idx;
ddr_perf_event_stop(event, PERF_EF_UPDATE);
ddr_perf_free_counter(pmu, counter);
pmu->active_events--;
hwc->idx = -1;
}
static void ddr_perf_pmu_enable(struct pmu *pmu)
{
struct ddr_pmu *ddr_pmu = to_ddr_pmu(pmu);
/* enable cycle counter if cycle is not active event list */
if (ddr_pmu->events[EVENT_CYCLES_COUNTER] == NULL)
ddr_perf_counter_enable(ddr_pmu,
EVENT_CYCLES_ID,
EVENT_CYCLES_COUNTER,
true);
}
static void ddr_perf_pmu_disable(struct pmu *pmu)
{
struct ddr_pmu *ddr_pmu = to_ddr_pmu(pmu);
if (ddr_pmu->events[EVENT_CYCLES_COUNTER] == NULL)
ddr_perf_counter_enable(ddr_pmu,
EVENT_CYCLES_ID,
EVENT_CYCLES_COUNTER,
false);
}
static int ddr_perf_init(struct ddr_pmu *pmu, void __iomem *base,
struct device *dev)
{
*pmu = (struct ddr_pmu) {
.pmu = (struct pmu) {
drivers/perf: Fix kernel panic when rmmod PMU modules during perf sampling When users try to remove PMU modules during perf sampling, kernel panic will happen because the pmu->read() is a NULL pointer here. INFO on HiSilicon hip08 platform as follow: pc : hisi_uncore_pmu_event_update+0x30/0xa4 [hisi_uncore_pmu] lr : hisi_uncore_pmu_read+0x20/0x2c [hisi_uncore_pmu] sp : ffff800010103e90 x29: ffff800010103e90 x28: ffff0027db0c0e40 x27: ffffa29a76f129d8 x26: ffffa29a77ceb000 x25: ffffa29a773a5000 x24: ffffa29a77392000 x23: ffffddffe5943f08 x22: ffff002784285960 x21: ffff002784285800 x20: ffff0027d2e76c80 x19: ffff0027842859e0 x18: ffff80003498bcc8 x17: ffffa29a76afe910 x16: ffffa29a7583f530 x15: 16151a1512061a1e x14: 0000000000000000 x13: ffffa29a76f1e238 x12: 0000000000000001 x11: 0000000000000400 x10: 00000000000009f0 x9 : ffff8000107b3e70 x8 : ffff0027db0c1890 x7 : ffffa29a773a7000 x6 : 00000007f5131013 x5 : 00000007f5131013 x4 : 09f257d417c00000 x3 : 00000002187bd7ce x2 : ffffa29a38f0f0d8 x1 : ffffa29a38eae268 x0 : ffff0027d2e76c80 Call trace: hisi_uncore_pmu_event_update+0x30/0xa4 [hisi_uncore_pmu] hisi_uncore_pmu_read+0x20/0x2c [hisi_uncore_pmu] __perf_event_read+0x1a0/0x1f8 flush_smp_call_function_queue+0xa0/0x160 generic_smp_call_function_single_interrupt+0x18/0x20 handle_IPI+0x31c/0x4dc gic_handle_irq+0x2c8/0x310 el1_irq+0xcc/0x180 arch_cpu_idle+0x4c/0x20c default_idle_call+0x20/0x30 do_idle+0x1b4/0x270 cpu_startup_entry+0x28/0x30 secondary_start_kernel+0x1a4/0x1fc To solve the above issue, current module should be registered to kernel, so that try_module_get() can be invoked when perf sampling starts. This adds the reference counting of module and could prevent users from removing modules during sampling. Reported-by: Haifeng Wang <wang.wanghaifeng@huawei.com> Signed-off-by: Qi Liu <liuqi115@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1594891165-8228-1-git-send-email-liuqi115@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2020-07-16 12:19:25 +03:00
.module = THIS_MODULE,
.capabilities = PERF_PMU_CAP_NO_EXCLUDE,
.task_ctx_nr = perf_invalid_context,
.attr_groups = attr_groups,
.event_init = ddr_perf_event_init,
.add = ddr_perf_event_add,
.del = ddr_perf_event_del,
.start = ddr_perf_event_start,
.stop = ddr_perf_event_stop,
.read = ddr_perf_event_update,
.pmu_enable = ddr_perf_pmu_enable,
.pmu_disable = ddr_perf_pmu_disable,
},
.base = base,
.dev = dev,
};
pmu->id = ida_simple_get(&ddr_ida, 0, 0, GFP_KERNEL);
return pmu->id;
}
static irqreturn_t ddr_perf_irq_handler(int irq, void *p)
{
int i;
struct ddr_pmu *pmu = (struct ddr_pmu *) p;
perf/imx_ddr: Add stop event counters support for i.MX8MP DDR Perf driver only supports free-running event counters(counter1/2/3) now, this patch adds support for stop event counters. Legacy SoCs: Cycle counter(counter0) is a special counter, only count cycles. When cycle counter overflow, it will lock all counters and generate an interrupt. In ddr_perf_irq_handler, disable cycle counter then all counters would stop at the same time, update all counters' count, then enable cycle counter that all counters count again. During this process, only clear cycle counter, no need to clear event counters since they are free-running counters. They would continue counting after overflow and do/while loop from ddr_perf_event_update can handle event counters overflow case. i.MX8MP: Almost all is the same as legacy SoCs, the only difference is that, event counters are not free-running any more. Like cycle counter, when event counters overflow, they would stop counting unless clear the counter, and no interrupt generate for event counters. So we should clear event counters that let them re-count when cycle counter overflow, which ensure event counters will not lose data. This patch adds stop event counters support which would be compatible to free-running event counters. We use the cycle counter to stop overflow of the event counters. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20201027104451.15434-1-qiangqing.zhang@nxp.com Signed-off-by: Will Deacon <will@kernel.org>
2020-10-27 13:44:51 +03:00
struct perf_event *event;
/* all counter will stop if cycle counter disabled */
ddr_perf_counter_enable(pmu,
EVENT_CYCLES_ID,
EVENT_CYCLES_COUNTER,
false);
/*
* When the cycle counter overflows, all counters are stopped,
* and an IRQ is raised. If any other counter overflows, it
perf/imx_ddr: Add stop event counters support for i.MX8MP DDR Perf driver only supports free-running event counters(counter1/2/3) now, this patch adds support for stop event counters. Legacy SoCs: Cycle counter(counter0) is a special counter, only count cycles. When cycle counter overflow, it will lock all counters and generate an interrupt. In ddr_perf_irq_handler, disable cycle counter then all counters would stop at the same time, update all counters' count, then enable cycle counter that all counters count again. During this process, only clear cycle counter, no need to clear event counters since they are free-running counters. They would continue counting after overflow and do/while loop from ddr_perf_event_update can handle event counters overflow case. i.MX8MP: Almost all is the same as legacy SoCs, the only difference is that, event counters are not free-running any more. Like cycle counter, when event counters overflow, they would stop counting unless clear the counter, and no interrupt generate for event counters. So we should clear event counters that let them re-count when cycle counter overflow, which ensure event counters will not lose data. This patch adds stop event counters support which would be compatible to free-running event counters. We use the cycle counter to stop overflow of the event counters. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20201027104451.15434-1-qiangqing.zhang@nxp.com Signed-off-by: Will Deacon <will@kernel.org>
2020-10-27 13:44:51 +03:00
* continues counting, and no IRQ is raised. But for new SoCs,
* such as i.MX8MP, event counter would stop when overflow, so
* we need use cycle counter to stop overflow of event counter.
*
* Cycles occur at least 4 times as often as other events, so we
* can update all events on a cycle counter overflow and not
* lose events.
*
*/
for (i = 0; i < NUM_COUNTERS; i++) {
if (!pmu->events[i])
continue;
event = pmu->events[i];
ddr_perf_event_update(event);
}
ddr_perf_counter_enable(pmu,
EVENT_CYCLES_ID,
EVENT_CYCLES_COUNTER,
true);
return IRQ_HANDLED;
}
static int ddr_perf_offline_cpu(unsigned int cpu, struct hlist_node *node)
{
struct ddr_pmu *pmu = hlist_entry_safe(node, struct ddr_pmu, node);
int target;
if (cpu != pmu->cpu)
return 0;
target = cpumask_any_but(cpu_online_mask, cpu);
if (target >= nr_cpu_ids)
return 0;
perf_pmu_migrate_context(&pmu->pmu, cpu, target);
pmu->cpu = target;
WARN_ON(irq_set_affinity(pmu->irq, cpumask_of(pmu->cpu)));
return 0;
}
static int ddr_perf_probe(struct platform_device *pdev)
{
struct ddr_pmu *pmu;
struct device_node *np;
void __iomem *base;
char *name;
int num;
int ret;
int irq;
base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(base))
return PTR_ERR(base);
np = pdev->dev.of_node;
pmu = devm_kzalloc(&pdev->dev, sizeof(*pmu), GFP_KERNEL);
if (!pmu)
return -ENOMEM;
num = ddr_perf_init(pmu, base, &pdev->dev);
platform_set_drvdata(pdev, pmu);
name = devm_kasprintf(&pdev->dev, GFP_KERNEL, DDR_PERF_DEV_NAME "%d",
num);
if (!name)
return -ENOMEM;
pmu->devtype_data = of_device_get_match_data(&pdev->dev);
pmu->cpu = raw_smp_processor_id();
ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN,
DDR_CPUHP_CB_NAME,
NULL,
ddr_perf_offline_cpu);
if (ret < 0) {
dev_err(&pdev->dev, "cpuhp_setup_state_multi failed\n");
goto cpuhp_state_err;
}
pmu->cpuhp_state = ret;
/* Register the pmu instance for cpu hotplug */
ret = cpuhp_state_add_instance_nocalls(pmu->cpuhp_state, &pmu->node);
if (ret) {
dev_err(&pdev->dev, "Error %d registering hotplug\n", ret);
goto cpuhp_instance_err;
}
/* Request irq */
irq = of_irq_get(np, 0);
if (irq < 0) {
dev_err(&pdev->dev, "Failed to get irq: %d", irq);
ret = irq;
goto ddr_perf_err;
}
ret = devm_request_irq(&pdev->dev, irq,
ddr_perf_irq_handler,
IRQF_NOBALANCING | IRQF_NO_THREAD,
DDR_CPUHP_CB_NAME,
pmu);
if (ret < 0) {
dev_err(&pdev->dev, "Request irq failed: %d", ret);
goto ddr_perf_err;
}
pmu->irq = irq;
ret = irq_set_affinity(pmu->irq, cpumask_of(pmu->cpu));
if (ret) {
dev_err(pmu->dev, "Failed to set interrupt affinity!\n");
goto ddr_perf_err;
}
ret = perf_pmu_register(&pmu->pmu, name, -1);
if (ret)
goto ddr_perf_err;
return 0;
ddr_perf_err:
cpuhp_state_remove_instance_nocalls(pmu->cpuhp_state, &pmu->node);
cpuhp_instance_err:
cpuhp_remove_multi_state(pmu->cpuhp_state);
cpuhp_state_err:
ida_simple_remove(&ddr_ida, pmu->id);
dev_warn(&pdev->dev, "i.MX8 DDR Perf PMU failed (%d), disabled\n", ret);
return ret;
}
static int ddr_perf_remove(struct platform_device *pdev)
{
struct ddr_pmu *pmu = platform_get_drvdata(pdev);
cpuhp_state_remove_instance_nocalls(pmu->cpuhp_state, &pmu->node);
cpuhp_remove_multi_state(pmu->cpuhp_state);
perf_pmu_unregister(&pmu->pmu);
ida_simple_remove(&ddr_ida, pmu->id);
return 0;
}
static struct platform_driver imx_ddr_pmu_driver = {
.driver = {
.name = "imx-ddr-pmu",
.of_match_table = imx_ddr_pmu_dt_ids,
.suppress_bind_attrs = true,
},
.probe = ddr_perf_probe,
.remove = ddr_perf_remove,
};
module_platform_driver(imx_ddr_pmu_driver);
MODULE_LICENSE("GPL v2");