microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/arch/arm/kvm/trace.h

189 строки
4.0 KiB
C
Исходник Обычный вид История

KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 03:28:06 +04:00
#if !defined(_TRACE_KVM_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_KVM_H
#include <linux/tracepoint.h>
#undef TRACE_SYSTEM
#define TRACE_SYSTEM kvm
/*
* Tracepoints for entry/exit to guest
*/
TRACE_EVENT(kvm_entry,
TP_PROTO(unsigned long vcpu_pc),
TP_ARGS(vcpu_pc),
TP_STRUCT__entry(
__field( unsigned long, vcpu_pc )
),
TP_fast_assign(
__entry->vcpu_pc = vcpu_pc;
),
TP_printk("PC: 0x%08lx", __entry->vcpu_pc)
);
TRACE_EVENT(kvm_exit,
TP_PROTO(unsigned long vcpu_pc),
TP_ARGS(vcpu_pc),
TP_STRUCT__entry(
__field( unsigned long, vcpu_pc )
),
TP_fast_assign(
__entry->vcpu_pc = vcpu_pc;
),
TP_printk("PC: 0x%08lx", __entry->vcpu_pc)
);
KVM: ARM: Inject IRQs and FIQs from userspace All interrupt injection is now based on the VM ioctl KVM_IRQ_LINE. This works semantically well for the GIC as we in fact raise/lower a line on a machine component (the gic). The IOCTL uses the follwing struct. struct kvm_irq_level { union { __u32 irq; /* GSI */ __s32 status; /* not used for KVM_IRQ_LEVEL */ }; __u32 level; /* 0 or 1 */ }; ARM can signal an interrupt either at the CPU level, or at the in-kernel irqchip (GIC), and for in-kernel irqchip can tell the GIC to use PPIs designated for specific cpus. The irq field is interpreted like this:  bits: | 31 ... 24 | 23 ... 16 | 15 ... 0 | field: | irq_type | vcpu_index | irq_number | The irq_type field has the following values: - irq_type[0]: out-of-kernel GIC: irq_number 0 is IRQ, irq_number 1 is FIQ - irq_type[1]: in-kernel GIC: SPI, irq_number between 32 and 1019 (incl.) (the vcpu_index field is ignored) - irq_type[2]: in-kernel GIC: PPI, irq_number between 16 and 31 (incl.) The irq_number thus corresponds to the irq ID in as in the GICv2 specs. This is documented in Documentation/kvm/api.txt. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 03:28:08 +04:00
TRACE_EVENT(kvm_irq_line,
TP_PROTO(unsigned int type, int vcpu_idx, int irq_num, int level),
TP_ARGS(type, vcpu_idx, irq_num, level),
TP_STRUCT__entry(
__field( unsigned int, type )
__field( int, vcpu_idx )
__field( int, irq_num )
__field( int, level )
),
TP_fast_assign(
__entry->type = type;
__entry->vcpu_idx = vcpu_idx;
__entry->irq_num = irq_num;
__entry->level = level;
),
TP_printk("Inject %s interrupt (%d), vcpu->idx: %d, num: %d, level: %d",
(__entry->type == KVM_ARM_IRQ_TYPE_CPU) ? "CPU" :
(__entry->type == KVM_ARM_IRQ_TYPE_PPI) ? "VGIC PPI" :
(__entry->type == KVM_ARM_IRQ_TYPE_SPI) ? "VGIC SPI" : "UNKNOWN",
__entry->type, __entry->vcpu_idx, __entry->irq_num, __entry->level)
);
KVM: ARM: Emulation framework and CP15 emulation Adds a new important function in the main KVM/ARM code called handle_exit() which is called from kvm_arch_vcpu_ioctl_run() on returns from guest execution. This function examines the Hyp-Syndrome-Register (HSR), which contains information telling KVM what caused the exit from the guest. Some of the reasons for an exit are CP15 accesses, which are not allowed from the guest and this commit handles these exits by emulating the intended operation in software and skipping the guest instruction. Minor notes about the coproc register reset: 1) We reserve a value of 0 as an invalid cp15 offset, to catch bugs in our table, at cost of 4 bytes per vcpu. 2) Added comments on the table indicating how we handle each register, for simplicity of understanding. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 03:28:09 +04:00
/* Architecturally implementation defined CP15 register access */
TRACE_EVENT(kvm_emulate_cp15_imp,
TP_PROTO(unsigned long Op1, unsigned long Rt1, unsigned long CRn,
unsigned long CRm, unsigned long Op2, bool is_write),
TP_ARGS(Op1, Rt1, CRn, CRm, Op2, is_write),
TP_STRUCT__entry(
__field( unsigned int, Op1 )
__field( unsigned int, Rt1 )
__field( unsigned int, CRn )
__field( unsigned int, CRm )
__field( unsigned int, Op2 )
__field( bool, is_write )
),
TP_fast_assign(
__entry->is_write = is_write;
__entry->Op1 = Op1;
__entry->Rt1 = Rt1;
__entry->CRn = CRn;
__entry->CRm = CRm;
__entry->Op2 = Op2;
),
TP_printk("Implementation defined CP15: %s\tp15, %u, r%u, c%u, c%u, %u",
(__entry->is_write) ? "mcr" : "mrc",
__entry->Op1, __entry->Rt1, __entry->CRn,
__entry->CRm, __entry->Op2)
);
TRACE_EVENT(kvm_wfi,
TP_PROTO(unsigned long vcpu_pc),
TP_ARGS(vcpu_pc),
TP_STRUCT__entry(
__field( unsigned long, vcpu_pc )
),
TP_fast_assign(
__entry->vcpu_pc = vcpu_pc;
),
TP_printk("guest executed wfi at: 0x%08lx", __entry->vcpu_pc)
);
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 03:28:07 +04:00
TRACE_EVENT(kvm_unmap_hva,
TP_PROTO(unsigned long hva),
TP_ARGS(hva),
KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 03:28:06 +04:00
KVM: ARM: Memory virtualization setup This commit introduces the framework for guest memory management through the use of 2nd stage translation. Each VM has a pointer to a level-1 table (the pgd field in struct kvm_arch) which is used for the 2nd stage translations. Entries are added when handling guest faults (later patch) and the table itself can be allocated and freed through the following functions implemented in arch/arm/kvm/arm_mmu.c: - kvm_alloc_stage2_pgd(struct kvm *kvm); - kvm_free_stage2_pgd(struct kvm *kvm); Each entry in TLBs and caches are tagged with a VMID identifier in addition to ASIDs. The VMIDs are assigned consecutively to VMs in the order that VMs are executed, and caches and tlbs are invalidated when the VMID space has been used to allow for more than 255 simultaenously running guests. The 2nd stage pgd is allocated in kvm_arch_init_vm(). The table is freed in kvm_arch_destroy_vm(). Both functions are called from the main KVM code. We pre-allocate page table memory to be able to synchronize using a spinlock and be called under rcu_read_lock from the MMU notifiers. We steal the mmu_memory_cache implementation from x86 and adapt for our specific usage. We support MMU notifiers (thanks to Marc Zyngier) through kvm_unmap_hva and kvm_set_spte_hva. Finally, define kvm_phys_addr_ioremap() to map a device at a guest IPA, which is used by VGIC support to map the virtual CPU interface registers to the guest. This support is added by Marc Zyngier. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 03:28:07 +04:00
TP_STRUCT__entry(
__field( unsigned long, hva )
),
TP_fast_assign(
__entry->hva = hva;
),
TP_printk("mmu notifier unmap hva: %#08lx", __entry->hva)
);
TRACE_EVENT(kvm_unmap_hva_range,
TP_PROTO(unsigned long start, unsigned long end),
TP_ARGS(start, end),
TP_STRUCT__entry(
__field( unsigned long, start )
__field( unsigned long, end )
),
TP_fast_assign(
__entry->start = start;
__entry->end = end;
),
TP_printk("mmu notifier unmap range: %#08lx -- %#08lx",
__entry->start, __entry->end)
);
TRACE_EVENT(kvm_set_spte_hva,
TP_PROTO(unsigned long hva),
TP_ARGS(hva),
TP_STRUCT__entry(
__field( unsigned long, hva )
),
TP_fast_assign(
__entry->hva = hva;
),
TP_printk("mmu notifier set pte hva: %#08lx", __entry->hva)
);
KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 03:28:06 +04:00
KVM: ARM: Emulation framework and CP15 emulation Adds a new important function in the main KVM/ARM code called handle_exit() which is called from kvm_arch_vcpu_ioctl_run() on returns from guest execution. This function examines the Hyp-Syndrome-Register (HSR), which contains information telling KVM what caused the exit from the guest. Some of the reasons for an exit are CP15 accesses, which are not allowed from the guest and this commit handles these exits by emulating the intended operation in software and skipping the guest instruction. Minor notes about the coproc register reset: 1) We reserve a value of 0 as an invalid cp15 offset, to catch bugs in our table, at cost of 4 bytes per vcpu. 2) Added comments on the table indicating how we handle each register, for simplicity of understanding. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 03:28:09 +04:00
TRACE_EVENT(kvm_hvc,
TP_PROTO(unsigned long vcpu_pc, unsigned long r0, unsigned long imm),
TP_ARGS(vcpu_pc, r0, imm),
TP_STRUCT__entry(
__field( unsigned long, vcpu_pc )
__field( unsigned long, r0 )
__field( unsigned long, imm )
),
TP_fast_assign(
__entry->vcpu_pc = vcpu_pc;
__entry->r0 = r0;
__entry->imm = imm;
),
TP_printk("HVC at 0x%08lx (r0: 0x%08lx, imm: 0x%lx",
__entry->vcpu_pc, __entry->r0, __entry->imm)
);
KVM: ARM: Initial skeleton to compile KVM support Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-21 03:28:06 +04:00
#endif /* _TRACE_KVM_H */
#undef TRACE_INCLUDE_PATH
#define TRACE_INCLUDE_PATH arch/arm/kvm
#undef TRACE_INCLUDE_FILE
#define TRACE_INCLUDE_FILE trace
/* This part must be outside protection */
#include <trace/define_trace.h>