WSL2-Linux-Kernel/drivers/i2c/busses/i2c-qup.c

1674 строки
37 KiB
C
Исходник Обычный вид История

/*
* Copyright (c) 2009-2013, The Linux Foundation. All rights reserved.
* Copyright (c) 2014, Sony Mobile Communications AB.
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/acpi.h>
#include <linux/atomic.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/dmaengine.h>
#include <linux/dmapool.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/scatterlist.h>
/* QUP Registers */
#define QUP_CONFIG 0x000
#define QUP_STATE 0x004
#define QUP_IO_MODE 0x008
#define QUP_SW_RESET 0x00c
#define QUP_OPERATIONAL 0x018
#define QUP_ERROR_FLAGS 0x01c
#define QUP_ERROR_FLAGS_EN 0x020
#define QUP_OPERATIONAL_MASK 0x028
#define QUP_HW_VERSION 0x030
#define QUP_MX_OUTPUT_CNT 0x100
#define QUP_OUT_FIFO_BASE 0x110
#define QUP_MX_WRITE_CNT 0x150
#define QUP_MX_INPUT_CNT 0x200
#define QUP_MX_READ_CNT 0x208
#define QUP_IN_FIFO_BASE 0x218
#define QUP_I2C_CLK_CTL 0x400
#define QUP_I2C_STATUS 0x404
#define QUP_I2C_MASTER_GEN 0x408
/* QUP States and reset values */
#define QUP_RESET_STATE 0
#define QUP_RUN_STATE 1
#define QUP_PAUSE_STATE 3
#define QUP_STATE_MASK 3
#define QUP_STATE_VALID BIT(2)
#define QUP_I2C_MAST_GEN BIT(4)
#define QUP_I2C_FLUSH BIT(6)
#define QUP_OPERATIONAL_RESET 0x000ff0
#define QUP_I2C_STATUS_RESET 0xfffffc
/* QUP OPERATIONAL FLAGS */
#define QUP_I2C_NACK_FLAG BIT(3)
#define QUP_OUT_NOT_EMPTY BIT(4)
#define QUP_IN_NOT_EMPTY BIT(5)
#define QUP_OUT_FULL BIT(6)
#define QUP_OUT_SVC_FLAG BIT(8)
#define QUP_IN_SVC_FLAG BIT(9)
#define QUP_MX_OUTPUT_DONE BIT(10)
#define QUP_MX_INPUT_DONE BIT(11)
/* I2C mini core related values */
#define QUP_CLOCK_AUTO_GATE BIT(13)
#define I2C_MINI_CORE (2 << 8)
#define I2C_N_VAL 15
#define I2C_N_VAL_V2 7
/* Most significant word offset in FIFO port */
#define QUP_MSW_SHIFT (I2C_N_VAL + 1)
/* Packing/Unpacking words in FIFOs, and IO modes */
#define QUP_OUTPUT_BLK_MODE (1 << 10)
#define QUP_OUTPUT_BAM_MODE (3 << 10)
#define QUP_INPUT_BLK_MODE (1 << 12)
#define QUP_INPUT_BAM_MODE (3 << 12)
#define QUP_BAM_MODE (QUP_OUTPUT_BAM_MODE | QUP_INPUT_BAM_MODE)
#define QUP_UNPACK_EN BIT(14)
#define QUP_PACK_EN BIT(15)
#define QUP_REPACK_EN (QUP_UNPACK_EN | QUP_PACK_EN)
#define QUP_V2_TAGS_EN 1
#define QUP_OUTPUT_BLOCK_SIZE(x)(((x) >> 0) & 0x03)
#define QUP_OUTPUT_FIFO_SIZE(x) (((x) >> 2) & 0x07)
#define QUP_INPUT_BLOCK_SIZE(x) (((x) >> 5) & 0x03)
#define QUP_INPUT_FIFO_SIZE(x) (((x) >> 7) & 0x07)
/* QUP tags */
#define QUP_TAG_START (1 << 8)
#define QUP_TAG_DATA (2 << 8)
#define QUP_TAG_STOP (3 << 8)
#define QUP_TAG_REC (4 << 8)
#define QUP_BAM_INPUT_EOT 0x93
#define QUP_BAM_FLUSH_STOP 0x96
/* QUP v2 tags */
#define QUP_TAG_V2_START 0x81
#define QUP_TAG_V2_DATAWR 0x82
#define QUP_TAG_V2_DATAWR_STOP 0x83
#define QUP_TAG_V2_DATARD 0x85
#define QUP_TAG_V2_DATARD_STOP 0x87
/* Status, Error flags */
#define I2C_STATUS_WR_BUFFER_FULL BIT(0)
#define I2C_STATUS_BUS_ACTIVE BIT(8)
#define I2C_STATUS_ERROR_MASK 0x38000fc
#define QUP_STATUS_ERROR_FLAGS 0x7c
#define QUP_READ_LIMIT 256
#define SET_BIT 0x1
#define RESET_BIT 0x0
#define ONE_BYTE 0x1
#define QUP_I2C_MX_CONFIG_DURING_RUN BIT(31)
#define MX_TX_RX_LEN SZ_64K
#define MX_BLOCKS (MX_TX_RX_LEN / QUP_READ_LIMIT)
/* Max timeout in ms for 32k bytes */
#define TOUT_MAX 300
/* Default values. Use these if FW query fails */
#define DEFAULT_CLK_FREQ 100000
#define DEFAULT_SRC_CLK 20000000
struct qup_i2c_block {
int count;
int pos;
int tx_tag_len;
int rx_tag_len;
int data_len;
u8 tags[6];
};
struct qup_i2c_tag {
u8 *start;
dma_addr_t addr;
};
struct qup_i2c_bam {
struct qup_i2c_tag tag;
struct dma_chan *dma;
struct scatterlist *sg;
};
struct qup_i2c_dev {
struct device *dev;
void __iomem *base;
int irq;
struct clk *clk;
struct clk *pclk;
struct i2c_adapter adap;
int clk_ctl;
int out_fifo_sz;
int in_fifo_sz;
int out_blk_sz;
int in_blk_sz;
unsigned long one_byte_t;
struct qup_i2c_block blk;
struct i2c_msg *msg;
/* Current posion in user message buffer */
int pos;
/* I2C protocol errors */
u32 bus_err;
/* QUP core errors */
u32 qup_err;
/* To check if this is the last msg */
bool is_last;
/* To configure when bus is in run state */
int config_run;
/* dma parameters */
bool is_dma;
struct dma_pool *dpool;
struct qup_i2c_tag start_tag;
struct qup_i2c_bam brx;
struct qup_i2c_bam btx;
struct completion xfer;
};
static irqreturn_t qup_i2c_interrupt(int irq, void *dev)
{
struct qup_i2c_dev *qup = dev;
u32 bus_err;
u32 qup_err;
u32 opflags;
bus_err = readl(qup->base + QUP_I2C_STATUS);
qup_err = readl(qup->base + QUP_ERROR_FLAGS);
opflags = readl(qup->base + QUP_OPERATIONAL);
if (!qup->msg) {
/* Clear Error interrupt */
writel(QUP_RESET_STATE, qup->base + QUP_STATE);
return IRQ_HANDLED;
}
bus_err &= I2C_STATUS_ERROR_MASK;
qup_err &= QUP_STATUS_ERROR_FLAGS;
/* Clear the error bits in QUP_ERROR_FLAGS */
if (qup_err)
writel(qup_err, qup->base + QUP_ERROR_FLAGS);
/* Clear the error bits in QUP_I2C_STATUS */
if (bus_err)
writel(bus_err, qup->base + QUP_I2C_STATUS);
/* Reset the QUP State in case of error */
if (qup_err || bus_err) {
writel(QUP_RESET_STATE, qup->base + QUP_STATE);
goto done;
}
if (opflags & QUP_IN_SVC_FLAG)
writel(QUP_IN_SVC_FLAG, qup->base + QUP_OPERATIONAL);
if (opflags & QUP_OUT_SVC_FLAG)
writel(QUP_OUT_SVC_FLAG, qup->base + QUP_OPERATIONAL);
done:
qup->qup_err = qup_err;
qup->bus_err = bus_err;
complete(&qup->xfer);
return IRQ_HANDLED;
}
static int qup_i2c_poll_state_mask(struct qup_i2c_dev *qup,
u32 req_state, u32 req_mask)
{
int retries = 1;
u32 state;
/*
* State transition takes 3 AHB clocks cycles + 3 I2C master clock
* cycles. So retry once after a 1uS delay.
*/
do {
state = readl(qup->base + QUP_STATE);
if (state & QUP_STATE_VALID &&
(state & req_mask) == req_state)
return 0;
udelay(1);
} while (retries--);
return -ETIMEDOUT;
}
static int qup_i2c_poll_state(struct qup_i2c_dev *qup, u32 req_state)
{
return qup_i2c_poll_state_mask(qup, req_state, QUP_STATE_MASK);
}
static void qup_i2c_flush(struct qup_i2c_dev *qup)
{
u32 val = readl(qup->base + QUP_STATE);
val |= QUP_I2C_FLUSH;
writel(val, qup->base + QUP_STATE);
}
static int qup_i2c_poll_state_valid(struct qup_i2c_dev *qup)
{
return qup_i2c_poll_state_mask(qup, 0, 0);
}
static int qup_i2c_poll_state_i2c_master(struct qup_i2c_dev *qup)
{
return qup_i2c_poll_state_mask(qup, QUP_I2C_MAST_GEN, QUP_I2C_MAST_GEN);
}
static int qup_i2c_change_state(struct qup_i2c_dev *qup, u32 state)
{
if (qup_i2c_poll_state_valid(qup) != 0)
return -EIO;
writel(state, qup->base + QUP_STATE);
if (qup_i2c_poll_state(qup, state) != 0)
return -EIO;
return 0;
}
/**
* qup_i2c_wait_ready - wait for a give number of bytes in tx/rx path
* @qup: The qup_i2c_dev device
* @op: The bit/event to wait on
* @val: value of the bit to wait on, 0 or 1
* @len: The length the bytes to be transferred
*/
static int qup_i2c_wait_ready(struct qup_i2c_dev *qup, int op, bool val,
int len)
{
unsigned long timeout;
u32 opflags;
u32 status;
u32 shift = __ffs(op);
int ret = 0;
len *= qup->one_byte_t;
/* timeout after a wait of twice the max time */
timeout = jiffies + len * 4;
for (;;) {
opflags = readl(qup->base + QUP_OPERATIONAL);
status = readl(qup->base + QUP_I2C_STATUS);
if (((opflags & op) >> shift) == val) {
if ((op == QUP_OUT_NOT_EMPTY) && qup->is_last) {
if (!(status & I2C_STATUS_BUS_ACTIVE)) {
ret = 0;
goto done;
}
} else {
ret = 0;
goto done;
}
}
if (time_after(jiffies, timeout)) {
ret = -ETIMEDOUT;
goto done;
}
usleep_range(len, len * 2);
}
done:
if (qup->bus_err || qup->qup_err)
ret = (qup->bus_err & QUP_I2C_NACK_FLAG) ? -ENXIO : -EIO;
return ret;
}
static void qup_i2c_set_write_mode_v2(struct qup_i2c_dev *qup,
struct i2c_msg *msg)
{
/* Number of entries to shift out, including the tags */
int total = msg->len + qup->blk.tx_tag_len;
total |= qup->config_run;
if (total < qup->out_fifo_sz) {
/* FIFO mode */
writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE);
writel(total, qup->base + QUP_MX_WRITE_CNT);
} else {
/* BLOCK mode (transfer data on chunks) */
writel(QUP_OUTPUT_BLK_MODE | QUP_REPACK_EN,
qup->base + QUP_IO_MODE);
writel(total, qup->base + QUP_MX_OUTPUT_CNT);
}
}
static void qup_i2c_set_write_mode(struct qup_i2c_dev *qup, struct i2c_msg *msg)
{
/* Number of entries to shift out, including the start */
int total = msg->len + 1;
if (total < qup->out_fifo_sz) {
/* FIFO mode */
writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE);
writel(total, qup->base + QUP_MX_WRITE_CNT);
} else {
/* BLOCK mode (transfer data on chunks) */
writel(QUP_OUTPUT_BLK_MODE | QUP_REPACK_EN,
qup->base + QUP_IO_MODE);
writel(total, qup->base + QUP_MX_OUTPUT_CNT);
}
}
static int check_for_fifo_space(struct qup_i2c_dev *qup)
{
int ret;
ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE);
if (ret)
goto out;
ret = qup_i2c_wait_ready(qup, QUP_OUT_FULL,
RESET_BIT, 4 * ONE_BYTE);
if (ret) {
/* Fifo is full. Drain out the fifo */
ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
if (ret)
goto out;
ret = qup_i2c_wait_ready(qup, QUP_OUT_NOT_EMPTY,
RESET_BIT, 256 * ONE_BYTE);
if (ret) {
dev_err(qup->dev, "timeout for fifo out full");
goto out;
}
ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE);
if (ret)
goto out;
}
out:
return ret;
}
static int qup_i2c_issue_write(struct qup_i2c_dev *qup, struct i2c_msg *msg)
{
u32 addr = msg->addr << 1;
u32 qup_tag;
int idx;
u32 val;
int ret = 0;
if (qup->pos == 0) {
val = QUP_TAG_START | addr;
idx = 1;
} else {
val = 0;
idx = 0;
}
while (qup->pos < msg->len) {
/* Check that there's space in the FIFO for our pair */
ret = check_for_fifo_space(qup);
if (ret)
return ret;
if (qup->pos == msg->len - 1)
qup_tag = QUP_TAG_STOP;
else
qup_tag = QUP_TAG_DATA;
if (idx & 1)
val |= (qup_tag | msg->buf[qup->pos]) << QUP_MSW_SHIFT;
else
val = qup_tag | msg->buf[qup->pos];
/* Write out the pair and the last odd value */
if (idx & 1 || qup->pos == msg->len - 1)
writel(val, qup->base + QUP_OUT_FIFO_BASE);
qup->pos++;
idx++;
}
ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
return ret;
}
static void qup_i2c_set_blk_data(struct qup_i2c_dev *qup,
struct i2c_msg *msg)
{
memset(&qup->blk, 0, sizeof(qup->blk));
qup->blk.data_len = msg->len;
qup->blk.count = (msg->len + QUP_READ_LIMIT - 1) / QUP_READ_LIMIT;
/* 4 bytes for first block and 2 writes for rest */
qup->blk.tx_tag_len = 4 + (qup->blk.count - 1) * 2;
/* There are 2 tag bytes that are read in to fifo for every block */
if (msg->flags & I2C_M_RD)
qup->blk.rx_tag_len = qup->blk.count * 2;
}
static int qup_i2c_send_data(struct qup_i2c_dev *qup, int tlen, u8 *tbuf,
int dlen, u8 *dbuf)
{
u32 val = 0, idx = 0, pos = 0, i = 0, t;
int len = tlen + dlen;
u8 *buf = tbuf;
int ret = 0;
while (len > 0) {
ret = check_for_fifo_space(qup);
if (ret)
return ret;
t = (len >= 4) ? 4 : len;
while (idx < t) {
if (!i && (pos >= tlen)) {
buf = dbuf;
pos = 0;
i = 1;
}
val |= buf[pos++] << (idx++ * 8);
}
writel(val, qup->base + QUP_OUT_FIFO_BASE);
idx = 0;
val = 0;
len -= 4;
}
ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
return ret;
}
static int qup_i2c_get_data_len(struct qup_i2c_dev *qup)
{
int data_len;
if (qup->blk.data_len > QUP_READ_LIMIT)
data_len = QUP_READ_LIMIT;
else
data_len = qup->blk.data_len;
return data_len;
}
static int qup_i2c_set_tags(u8 *tags, struct qup_i2c_dev *qup,
struct i2c_msg *msg, int is_dma)
{
u16 addr = i2c_8bit_addr_from_msg(msg);
int len = 0;
int data_len;
int last = (qup->blk.pos == (qup->blk.count - 1)) && (qup->is_last);
if (qup->blk.pos == 0) {
tags[len++] = QUP_TAG_V2_START;
tags[len++] = addr & 0xff;
if (msg->flags & I2C_M_TEN)
tags[len++] = addr >> 8;
}
/* Send _STOP commands for the last block */
if (last) {
if (msg->flags & I2C_M_RD)
tags[len++] = QUP_TAG_V2_DATARD_STOP;
else
tags[len++] = QUP_TAG_V2_DATAWR_STOP;
} else {
if (msg->flags & I2C_M_RD)
tags[len++] = QUP_TAG_V2_DATARD;
else
tags[len++] = QUP_TAG_V2_DATAWR;
}
data_len = qup_i2c_get_data_len(qup);
/* 0 implies 256 bytes */
if (data_len == QUP_READ_LIMIT)
tags[len++] = 0;
else
tags[len++] = data_len;
if ((msg->flags & I2C_M_RD) && last && is_dma) {
tags[len++] = QUP_BAM_INPUT_EOT;
tags[len++] = QUP_BAM_FLUSH_STOP;
}
return len;
}
static int qup_i2c_issue_xfer_v2(struct qup_i2c_dev *qup, struct i2c_msg *msg)
{
int data_len = 0, tag_len, index;
int ret;
tag_len = qup_i2c_set_tags(qup->blk.tags, qup, msg, 0);
index = msg->len - qup->blk.data_len;
/* only tags are written for read */
if (!(msg->flags & I2C_M_RD))
data_len = qup_i2c_get_data_len(qup);
ret = qup_i2c_send_data(qup, tag_len, qup->blk.tags,
data_len, &msg->buf[index]);
qup->blk.data_len -= data_len;
return ret;
}
static void qup_i2c_bam_cb(void *data)
{
struct qup_i2c_dev *qup = data;
complete(&qup->xfer);
}
static int qup_sg_set_buf(struct scatterlist *sg, void *buf,
i2c: qup: Fix broken dma when CONFIG_DEBUG_SG is enabled With CONFIG_DEBUG_SG is enabled and when dma mode is used, below dump is seen, ------------[ cut here ]------------ kernel BUG at include/linux/scatterlist.h:140! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-00459-g9f087b9-dirty #7 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) task: ffffffc036868000 ti: ffffffc036870000 task.ti: ffffffc036870000 PC is at qup_sg_set_buf.isra.13+0x138/0x154 LR is at qup_sg_set_buf.isra.13+0x50/0x154 pc : [<ffffffc0005a0ed8>] lr : [<ffffffc0005a0df0>] pstate: 60000145 sp : ffffffc0368735c0 x29: ffffffc0368735c0 x28: ffffffc036873752 x27: ffffffc035233018 x26: ffffffc000c4e000 x25: 0000000000000000 x24: 0000000000000004 x23: 0000000000000000 x22: ffffffc035233668 x21: ffffff80004e3000 x20: ffffffc0352e0018 x19: 0000004000000000 x18: 0000000000000028 x17: 0000000000000004 x16: ffffffc0017a39c8 x15: 0000000000001cdf x14: ffffffc0019929d8 x13: ffffffc0352e0018 x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000000001 x9 : ffffffc0012b2d70 x8 : ffffff80004e3000 x7 : 0000000000000018 x6 : 0000000030000000 x5 : ffffffc00199f018 x4 : ffffffc035233018 x3 : 0000000000000004 x2 : 00000000c0000000 x1 : 0000000000000003 x0 : 0000000000000000 Process swapper/0 (pid: 1, stack limit = 0xffffffc036870020) Stack: (0xffffffc0368735c0 to 0xffffffc036874000) sg_set_bug expects that the buf parameter passed in should be from lowmem and a valid pageframe. This is not true for pages from dma_alloc_coherent which can be carveouts, hence the check fails. Change allocation of sg buffers from dma_coherent memory to kzalloc to fix the issue. Note that now dma_map/unmap is used to make the kzalloc'ed buffers coherent before passing it to the dmaengine. Signed-off-by: Sricharan R <sricharan@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-06-10 21:08:19 +03:00
unsigned int buflen, struct qup_i2c_dev *qup,
int dir)
{
int ret;
sg_set_buf(sg, buf, buflen);
ret = dma_map_sg(qup->dev, sg, 1, dir);
if (!ret)
return -EINVAL;
return 0;
}
static void qup_i2c_rel_dma(struct qup_i2c_dev *qup)
{
if (qup->btx.dma)
dma_release_channel(qup->btx.dma);
if (qup->brx.dma)
dma_release_channel(qup->brx.dma);
qup->btx.dma = NULL;
qup->brx.dma = NULL;
}
static int qup_i2c_req_dma(struct qup_i2c_dev *qup)
{
int err;
if (!qup->btx.dma) {
qup->btx.dma = dma_request_slave_channel_reason(qup->dev, "tx");
if (IS_ERR(qup->btx.dma)) {
err = PTR_ERR(qup->btx.dma);
qup->btx.dma = NULL;
dev_err(qup->dev, "\n tx channel not available");
return err;
}
}
if (!qup->brx.dma) {
qup->brx.dma = dma_request_slave_channel_reason(qup->dev, "rx");
if (IS_ERR(qup->brx.dma)) {
dev_err(qup->dev, "\n rx channel not available");
err = PTR_ERR(qup->brx.dma);
qup->brx.dma = NULL;
qup_i2c_rel_dma(qup);
return err;
}
}
return 0;
}
static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
int num)
{
struct dma_async_tx_descriptor *txd, *rxd = NULL;
int ret = 0, idx = 0, limit = QUP_READ_LIMIT;
dma_cookie_t cookie_rx, cookie_tx;
u32 rx_nents = 0, tx_nents = 0, len, blocks, rem;
u32 i, tlen, tx_len, tx_buf = 0, rx_buf = 0, off = 0;
u8 *tags;
while (idx < num) {
tx_len = 0, len = 0, i = 0;
qup->is_last = (idx == (num - 1));
qup_i2c_set_blk_data(qup, msg);
blocks = qup->blk.count;
rem = msg->len - (blocks - 1) * limit;
if (msg->flags & I2C_M_RD) {
rx_nents += (blocks * 2) + 1;
tx_nents += 1;
while (qup->blk.pos < blocks) {
tlen = (i == (blocks - 1)) ? rem : limit;
tags = &qup->start_tag.start[off + len];
len += qup_i2c_set_tags(tags, qup, msg, 1);
qup->blk.data_len -= tlen;
/* scratch buf to read the start and len tags */
ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++],
&qup->brx.tag.start[0],
i2c: qup: Fix broken dma when CONFIG_DEBUG_SG is enabled With CONFIG_DEBUG_SG is enabled and when dma mode is used, below dump is seen, ------------[ cut here ]------------ kernel BUG at include/linux/scatterlist.h:140! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-00459-g9f087b9-dirty #7 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) task: ffffffc036868000 ti: ffffffc036870000 task.ti: ffffffc036870000 PC is at qup_sg_set_buf.isra.13+0x138/0x154 LR is at qup_sg_set_buf.isra.13+0x50/0x154 pc : [<ffffffc0005a0ed8>] lr : [<ffffffc0005a0df0>] pstate: 60000145 sp : ffffffc0368735c0 x29: ffffffc0368735c0 x28: ffffffc036873752 x27: ffffffc035233018 x26: ffffffc000c4e000 x25: 0000000000000000 x24: 0000000000000004 x23: 0000000000000000 x22: ffffffc035233668 x21: ffffff80004e3000 x20: ffffffc0352e0018 x19: 0000004000000000 x18: 0000000000000028 x17: 0000000000000004 x16: ffffffc0017a39c8 x15: 0000000000001cdf x14: ffffffc0019929d8 x13: ffffffc0352e0018 x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000000001 x9 : ffffffc0012b2d70 x8 : ffffff80004e3000 x7 : 0000000000000018 x6 : 0000000030000000 x5 : ffffffc00199f018 x4 : ffffffc035233018 x3 : 0000000000000004 x2 : 00000000c0000000 x1 : 0000000000000003 x0 : 0000000000000000 Process swapper/0 (pid: 1, stack limit = 0xffffffc036870020) Stack: (0xffffffc0368735c0 to 0xffffffc036874000) sg_set_bug expects that the buf parameter passed in should be from lowmem and a valid pageframe. This is not true for pages from dma_alloc_coherent which can be carveouts, hence the check fails. Change allocation of sg buffers from dma_coherent memory to kzalloc to fix the issue. Note that now dma_map/unmap is used to make the kzalloc'ed buffers coherent before passing it to the dmaengine. Signed-off-by: Sricharan R <sricharan@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-06-10 21:08:19 +03:00
2, qup, DMA_FROM_DEVICE);
if (ret)
return ret;
ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++],
&msg->buf[limit * i],
i2c: qup: Fix broken dma when CONFIG_DEBUG_SG is enabled With CONFIG_DEBUG_SG is enabled and when dma mode is used, below dump is seen, ------------[ cut here ]------------ kernel BUG at include/linux/scatterlist.h:140! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-00459-g9f087b9-dirty #7 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) task: ffffffc036868000 ti: ffffffc036870000 task.ti: ffffffc036870000 PC is at qup_sg_set_buf.isra.13+0x138/0x154 LR is at qup_sg_set_buf.isra.13+0x50/0x154 pc : [<ffffffc0005a0ed8>] lr : [<ffffffc0005a0df0>] pstate: 60000145 sp : ffffffc0368735c0 x29: ffffffc0368735c0 x28: ffffffc036873752 x27: ffffffc035233018 x26: ffffffc000c4e000 x25: 0000000000000000 x24: 0000000000000004 x23: 0000000000000000 x22: ffffffc035233668 x21: ffffff80004e3000 x20: ffffffc0352e0018 x19: 0000004000000000 x18: 0000000000000028 x17: 0000000000000004 x16: ffffffc0017a39c8 x15: 0000000000001cdf x14: ffffffc0019929d8 x13: ffffffc0352e0018 x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000000001 x9 : ffffffc0012b2d70 x8 : ffffff80004e3000 x7 : 0000000000000018 x6 : 0000000030000000 x5 : ffffffc00199f018 x4 : ffffffc035233018 x3 : 0000000000000004 x2 : 00000000c0000000 x1 : 0000000000000003 x0 : 0000000000000000 Process swapper/0 (pid: 1, stack limit = 0xffffffc036870020) Stack: (0xffffffc0368735c0 to 0xffffffc036874000) sg_set_bug expects that the buf parameter passed in should be from lowmem and a valid pageframe. This is not true for pages from dma_alloc_coherent which can be carveouts, hence the check fails. Change allocation of sg buffers from dma_coherent memory to kzalloc to fix the issue. Note that now dma_map/unmap is used to make the kzalloc'ed buffers coherent before passing it to the dmaengine. Signed-off-by: Sricharan R <sricharan@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-06-10 21:08:19 +03:00
tlen, qup,
DMA_FROM_DEVICE);
if (ret)
return ret;
i++;
qup->blk.pos = i;
}
ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
&qup->start_tag.start[off],
i2c: qup: Fix broken dma when CONFIG_DEBUG_SG is enabled With CONFIG_DEBUG_SG is enabled and when dma mode is used, below dump is seen, ------------[ cut here ]------------ kernel BUG at include/linux/scatterlist.h:140! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-00459-g9f087b9-dirty #7 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) task: ffffffc036868000 ti: ffffffc036870000 task.ti: ffffffc036870000 PC is at qup_sg_set_buf.isra.13+0x138/0x154 LR is at qup_sg_set_buf.isra.13+0x50/0x154 pc : [<ffffffc0005a0ed8>] lr : [<ffffffc0005a0df0>] pstate: 60000145 sp : ffffffc0368735c0 x29: ffffffc0368735c0 x28: ffffffc036873752 x27: ffffffc035233018 x26: ffffffc000c4e000 x25: 0000000000000000 x24: 0000000000000004 x23: 0000000000000000 x22: ffffffc035233668 x21: ffffff80004e3000 x20: ffffffc0352e0018 x19: 0000004000000000 x18: 0000000000000028 x17: 0000000000000004 x16: ffffffc0017a39c8 x15: 0000000000001cdf x14: ffffffc0019929d8 x13: ffffffc0352e0018 x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000000001 x9 : ffffffc0012b2d70 x8 : ffffff80004e3000 x7 : 0000000000000018 x6 : 0000000030000000 x5 : ffffffc00199f018 x4 : ffffffc035233018 x3 : 0000000000000004 x2 : 00000000c0000000 x1 : 0000000000000003 x0 : 0000000000000000 Process swapper/0 (pid: 1, stack limit = 0xffffffc036870020) Stack: (0xffffffc0368735c0 to 0xffffffc036874000) sg_set_bug expects that the buf parameter passed in should be from lowmem and a valid pageframe. This is not true for pages from dma_alloc_coherent which can be carveouts, hence the check fails. Change allocation of sg buffers from dma_coherent memory to kzalloc to fix the issue. Note that now dma_map/unmap is used to make the kzalloc'ed buffers coherent before passing it to the dmaengine. Signed-off-by: Sricharan R <sricharan@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-06-10 21:08:19 +03:00
len, qup, DMA_TO_DEVICE);
if (ret)
return ret;
off += len;
/* scratch buf to read the BAM EOT and FLUSH tags */
ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++],
&qup->brx.tag.start[0],
i2c: qup: Fix broken dma when CONFIG_DEBUG_SG is enabled With CONFIG_DEBUG_SG is enabled and when dma mode is used, below dump is seen, ------------[ cut here ]------------ kernel BUG at include/linux/scatterlist.h:140! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-00459-g9f087b9-dirty #7 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) task: ffffffc036868000 ti: ffffffc036870000 task.ti: ffffffc036870000 PC is at qup_sg_set_buf.isra.13+0x138/0x154 LR is at qup_sg_set_buf.isra.13+0x50/0x154 pc : [<ffffffc0005a0ed8>] lr : [<ffffffc0005a0df0>] pstate: 60000145 sp : ffffffc0368735c0 x29: ffffffc0368735c0 x28: ffffffc036873752 x27: ffffffc035233018 x26: ffffffc000c4e000 x25: 0000000000000000 x24: 0000000000000004 x23: 0000000000000000 x22: ffffffc035233668 x21: ffffff80004e3000 x20: ffffffc0352e0018 x19: 0000004000000000 x18: 0000000000000028 x17: 0000000000000004 x16: ffffffc0017a39c8 x15: 0000000000001cdf x14: ffffffc0019929d8 x13: ffffffc0352e0018 x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000000001 x9 : ffffffc0012b2d70 x8 : ffffff80004e3000 x7 : 0000000000000018 x6 : 0000000030000000 x5 : ffffffc00199f018 x4 : ffffffc035233018 x3 : 0000000000000004 x2 : 00000000c0000000 x1 : 0000000000000003 x0 : 0000000000000000 Process swapper/0 (pid: 1, stack limit = 0xffffffc036870020) Stack: (0xffffffc0368735c0 to 0xffffffc036874000) sg_set_bug expects that the buf parameter passed in should be from lowmem and a valid pageframe. This is not true for pages from dma_alloc_coherent which can be carveouts, hence the check fails. Change allocation of sg buffers from dma_coherent memory to kzalloc to fix the issue. Note that now dma_map/unmap is used to make the kzalloc'ed buffers coherent before passing it to the dmaengine. Signed-off-by: Sricharan R <sricharan@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-06-10 21:08:19 +03:00
2, qup, DMA_FROM_DEVICE);
if (ret)
return ret;
} else {
tx_nents += (blocks * 2);
while (qup->blk.pos < blocks) {
tlen = (i == (blocks - 1)) ? rem : limit;
tags = &qup->start_tag.start[off + tx_len];
len = qup_i2c_set_tags(tags, qup, msg, 1);
qup->blk.data_len -= tlen;
ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
i2c: qup: Fix broken dma when CONFIG_DEBUG_SG is enabled With CONFIG_DEBUG_SG is enabled and when dma mode is used, below dump is seen, ------------[ cut here ]------------ kernel BUG at include/linux/scatterlist.h:140! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-00459-g9f087b9-dirty #7 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) task: ffffffc036868000 ti: ffffffc036870000 task.ti: ffffffc036870000 PC is at qup_sg_set_buf.isra.13+0x138/0x154 LR is at qup_sg_set_buf.isra.13+0x50/0x154 pc : [<ffffffc0005a0ed8>] lr : [<ffffffc0005a0df0>] pstate: 60000145 sp : ffffffc0368735c0 x29: ffffffc0368735c0 x28: ffffffc036873752 x27: ffffffc035233018 x26: ffffffc000c4e000 x25: 0000000000000000 x24: 0000000000000004 x23: 0000000000000000 x22: ffffffc035233668 x21: ffffff80004e3000 x20: ffffffc0352e0018 x19: 0000004000000000 x18: 0000000000000028 x17: 0000000000000004 x16: ffffffc0017a39c8 x15: 0000000000001cdf x14: ffffffc0019929d8 x13: ffffffc0352e0018 x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000000001 x9 : ffffffc0012b2d70 x8 : ffffff80004e3000 x7 : 0000000000000018 x6 : 0000000030000000 x5 : ffffffc00199f018 x4 : ffffffc035233018 x3 : 0000000000000004 x2 : 00000000c0000000 x1 : 0000000000000003 x0 : 0000000000000000 Process swapper/0 (pid: 1, stack limit = 0xffffffc036870020) Stack: (0xffffffc0368735c0 to 0xffffffc036874000) sg_set_bug expects that the buf parameter passed in should be from lowmem and a valid pageframe. This is not true for pages from dma_alloc_coherent which can be carveouts, hence the check fails. Change allocation of sg buffers from dma_coherent memory to kzalloc to fix the issue. Note that now dma_map/unmap is used to make the kzalloc'ed buffers coherent before passing it to the dmaengine. Signed-off-by: Sricharan R <sricharan@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-06-10 21:08:19 +03:00
tags, len,
qup, DMA_TO_DEVICE);
if (ret)
return ret;
tx_len += len;
ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
&msg->buf[limit * i],
i2c: qup: Fix broken dma when CONFIG_DEBUG_SG is enabled With CONFIG_DEBUG_SG is enabled and when dma mode is used, below dump is seen, ------------[ cut here ]------------ kernel BUG at include/linux/scatterlist.h:140! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-00459-g9f087b9-dirty #7 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) task: ffffffc036868000 ti: ffffffc036870000 task.ti: ffffffc036870000 PC is at qup_sg_set_buf.isra.13+0x138/0x154 LR is at qup_sg_set_buf.isra.13+0x50/0x154 pc : [<ffffffc0005a0ed8>] lr : [<ffffffc0005a0df0>] pstate: 60000145 sp : ffffffc0368735c0 x29: ffffffc0368735c0 x28: ffffffc036873752 x27: ffffffc035233018 x26: ffffffc000c4e000 x25: 0000000000000000 x24: 0000000000000004 x23: 0000000000000000 x22: ffffffc035233668 x21: ffffff80004e3000 x20: ffffffc0352e0018 x19: 0000004000000000 x18: 0000000000000028 x17: 0000000000000004 x16: ffffffc0017a39c8 x15: 0000000000001cdf x14: ffffffc0019929d8 x13: ffffffc0352e0018 x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000000001 x9 : ffffffc0012b2d70 x8 : ffffff80004e3000 x7 : 0000000000000018 x6 : 0000000030000000 x5 : ffffffc00199f018 x4 : ffffffc035233018 x3 : 0000000000000004 x2 : 00000000c0000000 x1 : 0000000000000003 x0 : 0000000000000000 Process swapper/0 (pid: 1, stack limit = 0xffffffc036870020) Stack: (0xffffffc0368735c0 to 0xffffffc036874000) sg_set_bug expects that the buf parameter passed in should be from lowmem and a valid pageframe. This is not true for pages from dma_alloc_coherent which can be carveouts, hence the check fails. Change allocation of sg buffers from dma_coherent memory to kzalloc to fix the issue. Note that now dma_map/unmap is used to make the kzalloc'ed buffers coherent before passing it to the dmaengine. Signed-off-by: Sricharan R <sricharan@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-06-10 21:08:19 +03:00
tlen, qup, DMA_TO_DEVICE);
if (ret)
return ret;
i++;
qup->blk.pos = i;
}
off += tx_len;
if (idx == (num - 1)) {
len = 1;
if (rx_nents) {
qup->btx.tag.start[0] =
QUP_BAM_INPUT_EOT;
len++;
}
qup->btx.tag.start[len - 1] =
QUP_BAM_FLUSH_STOP;
ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++],
&qup->btx.tag.start[0],
i2c: qup: Fix broken dma when CONFIG_DEBUG_SG is enabled With CONFIG_DEBUG_SG is enabled and when dma mode is used, below dump is seen, ------------[ cut here ]------------ kernel BUG at include/linux/scatterlist.h:140! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-00459-g9f087b9-dirty #7 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) task: ffffffc036868000 ti: ffffffc036870000 task.ti: ffffffc036870000 PC is at qup_sg_set_buf.isra.13+0x138/0x154 LR is at qup_sg_set_buf.isra.13+0x50/0x154 pc : [<ffffffc0005a0ed8>] lr : [<ffffffc0005a0df0>] pstate: 60000145 sp : ffffffc0368735c0 x29: ffffffc0368735c0 x28: ffffffc036873752 x27: ffffffc035233018 x26: ffffffc000c4e000 x25: 0000000000000000 x24: 0000000000000004 x23: 0000000000000000 x22: ffffffc035233668 x21: ffffff80004e3000 x20: ffffffc0352e0018 x19: 0000004000000000 x18: 0000000000000028 x17: 0000000000000004 x16: ffffffc0017a39c8 x15: 0000000000001cdf x14: ffffffc0019929d8 x13: ffffffc0352e0018 x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000000001 x9 : ffffffc0012b2d70 x8 : ffffff80004e3000 x7 : 0000000000000018 x6 : 0000000030000000 x5 : ffffffc00199f018 x4 : ffffffc035233018 x3 : 0000000000000004 x2 : 00000000c0000000 x1 : 0000000000000003 x0 : 0000000000000000 Process swapper/0 (pid: 1, stack limit = 0xffffffc036870020) Stack: (0xffffffc0368735c0 to 0xffffffc036874000) sg_set_bug expects that the buf parameter passed in should be from lowmem and a valid pageframe. This is not true for pages from dma_alloc_coherent which can be carveouts, hence the check fails. Change allocation of sg buffers from dma_coherent memory to kzalloc to fix the issue. Note that now dma_map/unmap is used to make the kzalloc'ed buffers coherent before passing it to the dmaengine. Signed-off-by: Sricharan R <sricharan@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-06-10 21:08:19 +03:00
len, qup, DMA_TO_DEVICE);
if (ret)
return ret;
tx_nents += 1;
}
}
idx++;
msg++;
}
txd = dmaengine_prep_slave_sg(qup->btx.dma, qup->btx.sg, tx_nents,
DMA_MEM_TO_DEV,
DMA_PREP_INTERRUPT | DMA_PREP_FENCE);
if (!txd) {
dev_err(qup->dev, "failed to get tx desc\n");
ret = -EINVAL;
goto desc_err;
}
if (!rx_nents) {
txd->callback = qup_i2c_bam_cb;
txd->callback_param = qup;
}
cookie_tx = dmaengine_submit(txd);
if (dma_submit_error(cookie_tx)) {
ret = -EINVAL;
goto desc_err;
}
dma_async_issue_pending(qup->btx.dma);
if (rx_nents) {
rxd = dmaengine_prep_slave_sg(qup->brx.dma, qup->brx.sg,
rx_nents, DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT);
if (!rxd) {
dev_err(qup->dev, "failed to get rx desc\n");
ret = -EINVAL;
/* abort TX descriptors */
dmaengine_terminate_all(qup->btx.dma);
goto desc_err;
}
rxd->callback = qup_i2c_bam_cb;
rxd->callback_param = qup;
cookie_rx = dmaengine_submit(rxd);
if (dma_submit_error(cookie_rx)) {
ret = -EINVAL;
goto desc_err;
}
dma_async_issue_pending(qup->brx.dma);
}
if (!wait_for_completion_timeout(&qup->xfer, TOUT_MAX * HZ)) {
dev_err(qup->dev, "normal trans timed out\n");
ret = -ETIMEDOUT;
}
if (ret || qup->bus_err || qup->qup_err) {
if (qup_i2c_change_state(qup, QUP_RUN_STATE)) {
dev_err(qup->dev, "change to run state timed out");
goto desc_err;
}
if (rx_nents)
writel(QUP_BAM_INPUT_EOT,
qup->base + QUP_OUT_FIFO_BASE);
writel(QUP_BAM_FLUSH_STOP, qup->base + QUP_OUT_FIFO_BASE);
qup_i2c_flush(qup);
/* wait for remaining interrupts to occur */
if (!wait_for_completion_timeout(&qup->xfer, HZ))
dev_err(qup->dev, "flush timed out\n");
qup_i2c_rel_dma(qup);
ret = (qup->bus_err & QUP_I2C_NACK_FLAG) ? -ENXIO : -EIO;
}
desc_err:
dma_unmap_sg(qup->dev, qup->btx.sg, tx_nents, DMA_TO_DEVICE);
if (rx_nents)
dma_unmap_sg(qup->dev, qup->brx.sg, rx_nents,
DMA_FROM_DEVICE);
return ret;
}
static int qup_i2c_bam_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
int num)
{
struct qup_i2c_dev *qup = i2c_get_adapdata(adap);
int ret = 0;
enable_irq(qup->irq);
ret = qup_i2c_req_dma(qup);
if (ret)
goto out;
writel(0, qup->base + QUP_MX_INPUT_CNT);
writel(0, qup->base + QUP_MX_OUTPUT_CNT);
/* set BAM mode */
writel(QUP_REPACK_EN | QUP_BAM_MODE, qup->base + QUP_IO_MODE);
/* mask fifo irqs */
writel((0x3 << 8), qup->base + QUP_OPERATIONAL_MASK);
/* set RUN STATE */
ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
if (ret)
goto out;
writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL);
qup->msg = msg;
ret = qup_i2c_bam_do_xfer(qup, qup->msg, num);
out:
disable_irq(qup->irq);
qup->msg = NULL;
return ret;
}
static int qup_i2c_wait_for_complete(struct qup_i2c_dev *qup,
struct i2c_msg *msg)
{
unsigned long left;
int ret = 0;
left = wait_for_completion_timeout(&qup->xfer, HZ);
if (!left) {
writel(1, qup->base + QUP_SW_RESET);
ret = -ETIMEDOUT;
}
if (qup->bus_err || qup->qup_err)
ret = (qup->bus_err & QUP_I2C_NACK_FLAG) ? -ENXIO : -EIO;
return ret;
}
static int qup_i2c_write_one_v2(struct qup_i2c_dev *qup, struct i2c_msg *msg)
{
int ret = 0;
qup->msg = msg;
qup->pos = 0;
enable_irq(qup->irq);
qup_i2c_set_blk_data(qup, msg);
qup_i2c_set_write_mode_v2(qup, msg);
ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
if (ret)
goto err;
writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL);
do {
ret = qup_i2c_issue_xfer_v2(qup, msg);
if (ret)
goto err;
ret = qup_i2c_wait_for_complete(qup, msg);
if (ret)
goto err;
qup->blk.pos++;
} while (qup->blk.pos < qup->blk.count);
ret = qup_i2c_wait_ready(qup, QUP_OUT_NOT_EMPTY, RESET_BIT, ONE_BYTE);
err:
disable_irq(qup->irq);
qup->msg = NULL;
return ret;
}
static int qup_i2c_write_one(struct qup_i2c_dev *qup, struct i2c_msg *msg)
{
int ret;
qup->msg = msg;
qup->pos = 0;
enable_irq(qup->irq);
qup_i2c_set_write_mode(qup, msg);
ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
if (ret)
goto err;
writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL);
do {
ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE);
if (ret)
goto err;
ret = qup_i2c_issue_write(qup, msg);
if (ret)
goto err;
ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
if (ret)
goto err;
ret = qup_i2c_wait_for_complete(qup, msg);
if (ret)
goto err;
} while (qup->pos < msg->len);
/* Wait for the outstanding data in the fifo to drain */
ret = qup_i2c_wait_ready(qup, QUP_OUT_NOT_EMPTY, RESET_BIT, ONE_BYTE);
err:
disable_irq(qup->irq);
qup->msg = NULL;
return ret;
}
static void qup_i2c_set_read_mode(struct qup_i2c_dev *qup, int len)
{
if (len < qup->in_fifo_sz) {
/* FIFO mode */
writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE);
writel(len, qup->base + QUP_MX_READ_CNT);
} else {
/* BLOCK mode (transfer data on chunks) */
writel(QUP_INPUT_BLK_MODE | QUP_REPACK_EN,
qup->base + QUP_IO_MODE);
writel(len, qup->base + QUP_MX_INPUT_CNT);
}
}
static void qup_i2c_set_read_mode_v2(struct qup_i2c_dev *qup, int len)
{
int tx_len = qup->blk.tx_tag_len;
len += qup->blk.rx_tag_len;
len |= qup->config_run;
tx_len |= qup->config_run;
if (len < qup->in_fifo_sz) {
/* FIFO mode */
writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE);
writel(tx_len, qup->base + QUP_MX_WRITE_CNT);
writel(len, qup->base + QUP_MX_READ_CNT);
} else {
/* BLOCK mode (transfer data on chunks) */
writel(QUP_INPUT_BLK_MODE | QUP_REPACK_EN,
qup->base + QUP_IO_MODE);
writel(tx_len, qup->base + QUP_MX_OUTPUT_CNT);
writel(len, qup->base + QUP_MX_INPUT_CNT);
}
}
static void qup_i2c_issue_read(struct qup_i2c_dev *qup, struct i2c_msg *msg)
{
u32 addr, len, val;
addr = i2c_8bit_addr_from_msg(msg);
/* 0 is used to specify a length 256 (QUP_READ_LIMIT) */
len = (msg->len == QUP_READ_LIMIT) ? 0 : msg->len;
val = ((QUP_TAG_REC | len) << QUP_MSW_SHIFT) | QUP_TAG_START | addr;
writel(val, qup->base + QUP_OUT_FIFO_BASE);
}
static int qup_i2c_read_fifo(struct qup_i2c_dev *qup, struct i2c_msg *msg)
{
u32 val = 0;
int idx;
int ret = 0;
for (idx = 0; qup->pos < msg->len; idx++) {
if ((idx & 1) == 0) {
/* Check that FIFO have data */
ret = qup_i2c_wait_ready(qup, QUP_IN_NOT_EMPTY,
SET_BIT, 4 * ONE_BYTE);
if (ret)
return ret;
/* Reading 2 words at time */
val = readl(qup->base + QUP_IN_FIFO_BASE);
msg->buf[qup->pos++] = val & 0xFF;
} else {
msg->buf[qup->pos++] = val >> QUP_MSW_SHIFT;
}
}
return ret;
}
static int qup_i2c_read_fifo_v2(struct qup_i2c_dev *qup,
struct i2c_msg *msg)
{
u32 val;
int idx, pos = 0, ret = 0, total;
total = qup_i2c_get_data_len(qup);
/* 2 extra bytes for read tags */
while (pos < (total + 2)) {
/* Check that FIFO have data */
ret = qup_i2c_wait_ready(qup, QUP_IN_NOT_EMPTY,
SET_BIT, 4 * ONE_BYTE);
if (ret) {
dev_err(qup->dev, "timeout for fifo not empty");
return ret;
}
val = readl(qup->base + QUP_IN_FIFO_BASE);
for (idx = 0; idx < 4; idx++, val >>= 8, pos++) {
/* first 2 bytes are tag bytes */
if (pos < 2)
continue;
if (pos >= (total + 2))
goto out;
msg->buf[qup->pos++] = val & 0xff;
}
}
out:
qup->blk.data_len -= total;
return ret;
}
static int qup_i2c_read_one_v2(struct qup_i2c_dev *qup, struct i2c_msg *msg)
{
int ret = 0;
qup->msg = msg;
qup->pos = 0;
enable_irq(qup->irq);
qup_i2c_set_blk_data(qup, msg);
qup_i2c_set_read_mode_v2(qup, msg->len);
ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
if (ret)
goto err;
writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL);
do {
ret = qup_i2c_issue_xfer_v2(qup, msg);
if (ret)
goto err;
ret = qup_i2c_wait_for_complete(qup, msg);
if (ret)
goto err;
ret = qup_i2c_read_fifo_v2(qup, msg);
if (ret)
goto err;
qup->blk.pos++;
} while (qup->blk.pos < qup->blk.count);
err:
disable_irq(qup->irq);
qup->msg = NULL;
return ret;
}
static int qup_i2c_read_one(struct qup_i2c_dev *qup, struct i2c_msg *msg)
{
int ret;
qup->msg = msg;
qup->pos = 0;
enable_irq(qup->irq);
qup_i2c_set_read_mode(qup, msg->len);
ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
if (ret)
goto err;
writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL);
ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE);
if (ret)
goto err;
qup_i2c_issue_read(qup, msg);
ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
if (ret)
goto err;
do {
ret = qup_i2c_wait_for_complete(qup, msg);
if (ret)
goto err;
ret = qup_i2c_read_fifo(qup, msg);
if (ret)
goto err;
} while (qup->pos < msg->len);
err:
disable_irq(qup->irq);
qup->msg = NULL;
return ret;
}
static int qup_i2c_xfer(struct i2c_adapter *adap,
struct i2c_msg msgs[],
int num)
{
struct qup_i2c_dev *qup = i2c_get_adapdata(adap);
int ret, idx;
ret = pm_runtime_get_sync(qup->dev);
if (ret < 0)
goto out;
qup->bus_err = 0;
qup->qup_err = 0;
writel(1, qup->base + QUP_SW_RESET);
ret = qup_i2c_poll_state(qup, QUP_RESET_STATE);
if (ret)
goto out;
/* Configure QUP as I2C mini core */
writel(I2C_MINI_CORE | I2C_N_VAL, qup->base + QUP_CONFIG);
for (idx = 0; idx < num; idx++) {
if (msgs[idx].len == 0) {
ret = -EINVAL;
goto out;
}
if (qup_i2c_poll_state_i2c_master(qup)) {
ret = -EIO;
goto out;
}
if (msgs[idx].flags & I2C_M_RD)
ret = qup_i2c_read_one(qup, &msgs[idx]);
else
ret = qup_i2c_write_one(qup, &msgs[idx]);
if (ret)
break;
ret = qup_i2c_change_state(qup, QUP_RESET_STATE);
if (ret)
break;
}
if (ret == 0)
ret = num;
out:
pm_runtime_mark_last_busy(qup->dev);
pm_runtime_put_autosuspend(qup->dev);
return ret;
}
static int qup_i2c_xfer_v2(struct i2c_adapter *adap,
struct i2c_msg msgs[],
int num)
{
struct qup_i2c_dev *qup = i2c_get_adapdata(adap);
int ret, len, idx = 0, use_dma = 0;
qup->bus_err = 0;
qup->qup_err = 0;
ret = pm_runtime_get_sync(qup->dev);
if (ret < 0)
goto out;
writel(1, qup->base + QUP_SW_RESET);
ret = qup_i2c_poll_state(qup, QUP_RESET_STATE);
if (ret)
goto out;
/* Configure QUP as I2C mini core */
writel(I2C_MINI_CORE | I2C_N_VAL_V2, qup->base + QUP_CONFIG);
writel(QUP_V2_TAGS_EN, qup->base + QUP_I2C_MASTER_GEN);
if ((qup->is_dma)) {
/* All i2c_msgs should be transferred using either dma or cpu */
for (idx = 0; idx < num; idx++) {
if (msgs[idx].len == 0) {
ret = -EINVAL;
goto out;
}
len = (msgs[idx].len > qup->out_fifo_sz) ||
(msgs[idx].len > qup->in_fifo_sz);
if ((!is_vmalloc_addr(msgs[idx].buf)) && len) {
use_dma = 1;
} else {
use_dma = 0;
break;
}
}
}
idx = 0;
do {
if (msgs[idx].len == 0) {
ret = -EINVAL;
goto out;
}
if (qup_i2c_poll_state_i2c_master(qup)) {
ret = -EIO;
goto out;
}
qup->is_last = (idx == (num - 1));
if (idx)
qup->config_run = QUP_I2C_MX_CONFIG_DURING_RUN;
else
qup->config_run = 0;
reinit_completion(&qup->xfer);
if (use_dma) {
ret = qup_i2c_bam_xfer(adap, &msgs[idx], num);
} else {
if (msgs[idx].flags & I2C_M_RD)
ret = qup_i2c_read_one_v2(qup, &msgs[idx]);
else
ret = qup_i2c_write_one_v2(qup, &msgs[idx]);
}
} while ((idx++ < (num - 1)) && !use_dma && !ret);
if (!ret)
ret = qup_i2c_change_state(qup, QUP_RESET_STATE);
if (ret == 0)
ret = num;
out:
pm_runtime_mark_last_busy(qup->dev);
pm_runtime_put_autosuspend(qup->dev);
return ret;
}
static u32 qup_i2c_func(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
}
static const struct i2c_algorithm qup_i2c_algo = {
.master_xfer = qup_i2c_xfer,
.functionality = qup_i2c_func,
};
static const struct i2c_algorithm qup_i2c_algo_v2 = {
.master_xfer = qup_i2c_xfer_v2,
.functionality = qup_i2c_func,
};
/*
* The QUP block will issue a NACK and STOP on the bus when reaching
* the end of the read, the length of the read is specified as one byte
* which limits the possible read to 256 (QUP_READ_LIMIT) bytes.
*/
static struct i2c_adapter_quirks qup_i2c_quirks = {
.max_read_len = QUP_READ_LIMIT,
};
static void qup_i2c_enable_clocks(struct qup_i2c_dev *qup)
{
clk_prepare_enable(qup->clk);
clk_prepare_enable(qup->pclk);
}
static void qup_i2c_disable_clocks(struct qup_i2c_dev *qup)
{
u32 config;
qup_i2c_change_state(qup, QUP_RESET_STATE);
clk_disable_unprepare(qup->clk);
config = readl(qup->base + QUP_CONFIG);
config |= QUP_CLOCK_AUTO_GATE;
writel(config, qup->base + QUP_CONFIG);
clk_disable_unprepare(qup->pclk);
}
static int qup_i2c_probe(struct platform_device *pdev)
{
static const int blk_sizes[] = {4, 16, 32};
struct qup_i2c_dev *qup;
unsigned long one_bit_t;
struct resource *res;
u32 io_mode, hw_ver, size;
int ret, fs_div, hs_div;
u32 src_clk_freq = DEFAULT_SRC_CLK;
u32 clk_freq = DEFAULT_CLK_FREQ;
int blocks;
qup = devm_kzalloc(&pdev->dev, sizeof(*qup), GFP_KERNEL);
if (!qup)
return -ENOMEM;
qup->dev = &pdev->dev;
init_completion(&qup->xfer);
platform_set_drvdata(pdev, qup);
ret = device_property_read_u32(qup->dev, "clock-frequency", &clk_freq);
if (ret) {
dev_notice(qup->dev, "using default clock-frequency %d",
DEFAULT_CLK_FREQ);
}
if (of_device_is_compatible(pdev->dev.of_node, "qcom,i2c-qup-v1.1.1")) {
qup->adap.algo = &qup_i2c_algo;
qup->adap.quirks = &qup_i2c_quirks;
} else {
qup->adap.algo = &qup_i2c_algo_v2;
ret = qup_i2c_req_dma(qup);
if (ret == -EPROBE_DEFER)
goto fail_dma;
else if (ret != 0)
goto nodma;
blocks = (MX_BLOCKS << 1) + 1;
qup->btx.sg = devm_kzalloc(&pdev->dev,
sizeof(*qup->btx.sg) * blocks,
GFP_KERNEL);
if (!qup->btx.sg) {
ret = -ENOMEM;
goto fail_dma;
}
sg_init_table(qup->btx.sg, blocks);
qup->brx.sg = devm_kzalloc(&pdev->dev,
sizeof(*qup->brx.sg) * blocks,
GFP_KERNEL);
if (!qup->brx.sg) {
ret = -ENOMEM;
goto fail_dma;
}
sg_init_table(qup->brx.sg, blocks);
/* 2 tag bytes for each block + 5 for start, stop tags */
size = blocks * 2 + 5;
i2c: qup: Fix broken dma when CONFIG_DEBUG_SG is enabled With CONFIG_DEBUG_SG is enabled and when dma mode is used, below dump is seen, ------------[ cut here ]------------ kernel BUG at include/linux/scatterlist.h:140! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-00459-g9f087b9-dirty #7 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) task: ffffffc036868000 ti: ffffffc036870000 task.ti: ffffffc036870000 PC is at qup_sg_set_buf.isra.13+0x138/0x154 LR is at qup_sg_set_buf.isra.13+0x50/0x154 pc : [<ffffffc0005a0ed8>] lr : [<ffffffc0005a0df0>] pstate: 60000145 sp : ffffffc0368735c0 x29: ffffffc0368735c0 x28: ffffffc036873752 x27: ffffffc035233018 x26: ffffffc000c4e000 x25: 0000000000000000 x24: 0000000000000004 x23: 0000000000000000 x22: ffffffc035233668 x21: ffffff80004e3000 x20: ffffffc0352e0018 x19: 0000004000000000 x18: 0000000000000028 x17: 0000000000000004 x16: ffffffc0017a39c8 x15: 0000000000001cdf x14: ffffffc0019929d8 x13: ffffffc0352e0018 x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000000001 x9 : ffffffc0012b2d70 x8 : ffffff80004e3000 x7 : 0000000000000018 x6 : 0000000030000000 x5 : ffffffc00199f018 x4 : ffffffc035233018 x3 : 0000000000000004 x2 : 00000000c0000000 x1 : 0000000000000003 x0 : 0000000000000000 Process swapper/0 (pid: 1, stack limit = 0xffffffc036870020) Stack: (0xffffffc0368735c0 to 0xffffffc036874000) sg_set_bug expects that the buf parameter passed in should be from lowmem and a valid pageframe. This is not true for pages from dma_alloc_coherent which can be carveouts, hence the check fails. Change allocation of sg buffers from dma_coherent memory to kzalloc to fix the issue. Note that now dma_map/unmap is used to make the kzalloc'ed buffers coherent before passing it to the dmaengine. Signed-off-by: Sricharan R <sricharan@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-06-10 21:08:19 +03:00
qup->start_tag.start = devm_kzalloc(&pdev->dev,
size, GFP_KERNEL);
if (!qup->start_tag.start) {
ret = -ENOMEM;
goto fail_dma;
}
i2c: qup: Fix broken dma when CONFIG_DEBUG_SG is enabled With CONFIG_DEBUG_SG is enabled and when dma mode is used, below dump is seen, ------------[ cut here ]------------ kernel BUG at include/linux/scatterlist.h:140! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-00459-g9f087b9-dirty #7 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) task: ffffffc036868000 ti: ffffffc036870000 task.ti: ffffffc036870000 PC is at qup_sg_set_buf.isra.13+0x138/0x154 LR is at qup_sg_set_buf.isra.13+0x50/0x154 pc : [<ffffffc0005a0ed8>] lr : [<ffffffc0005a0df0>] pstate: 60000145 sp : ffffffc0368735c0 x29: ffffffc0368735c0 x28: ffffffc036873752 x27: ffffffc035233018 x26: ffffffc000c4e000 x25: 0000000000000000 x24: 0000000000000004 x23: 0000000000000000 x22: ffffffc035233668 x21: ffffff80004e3000 x20: ffffffc0352e0018 x19: 0000004000000000 x18: 0000000000000028 x17: 0000000000000004 x16: ffffffc0017a39c8 x15: 0000000000001cdf x14: ffffffc0019929d8 x13: ffffffc0352e0018 x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000000001 x9 : ffffffc0012b2d70 x8 : ffffff80004e3000 x7 : 0000000000000018 x6 : 0000000030000000 x5 : ffffffc00199f018 x4 : ffffffc035233018 x3 : 0000000000000004 x2 : 00000000c0000000 x1 : 0000000000000003 x0 : 0000000000000000 Process swapper/0 (pid: 1, stack limit = 0xffffffc036870020) Stack: (0xffffffc0368735c0 to 0xffffffc036874000) sg_set_bug expects that the buf parameter passed in should be from lowmem and a valid pageframe. This is not true for pages from dma_alloc_coherent which can be carveouts, hence the check fails. Change allocation of sg buffers from dma_coherent memory to kzalloc to fix the issue. Note that now dma_map/unmap is used to make the kzalloc'ed buffers coherent before passing it to the dmaengine. Signed-off-by: Sricharan R <sricharan@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-06-10 21:08:19 +03:00
qup->brx.tag.start = devm_kzalloc(&pdev->dev, 2, GFP_KERNEL);
if (!qup->brx.tag.start) {
ret = -ENOMEM;
goto fail_dma;
}
i2c: qup: Fix broken dma when CONFIG_DEBUG_SG is enabled With CONFIG_DEBUG_SG is enabled and when dma mode is used, below dump is seen, ------------[ cut here ]------------ kernel BUG at include/linux/scatterlist.h:140! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-00459-g9f087b9-dirty #7 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) task: ffffffc036868000 ti: ffffffc036870000 task.ti: ffffffc036870000 PC is at qup_sg_set_buf.isra.13+0x138/0x154 LR is at qup_sg_set_buf.isra.13+0x50/0x154 pc : [<ffffffc0005a0ed8>] lr : [<ffffffc0005a0df0>] pstate: 60000145 sp : ffffffc0368735c0 x29: ffffffc0368735c0 x28: ffffffc036873752 x27: ffffffc035233018 x26: ffffffc000c4e000 x25: 0000000000000000 x24: 0000000000000004 x23: 0000000000000000 x22: ffffffc035233668 x21: ffffff80004e3000 x20: ffffffc0352e0018 x19: 0000004000000000 x18: 0000000000000028 x17: 0000000000000004 x16: ffffffc0017a39c8 x15: 0000000000001cdf x14: ffffffc0019929d8 x13: ffffffc0352e0018 x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000000001 x9 : ffffffc0012b2d70 x8 : ffffff80004e3000 x7 : 0000000000000018 x6 : 0000000030000000 x5 : ffffffc00199f018 x4 : ffffffc035233018 x3 : 0000000000000004 x2 : 00000000c0000000 x1 : 0000000000000003 x0 : 0000000000000000 Process swapper/0 (pid: 1, stack limit = 0xffffffc036870020) Stack: (0xffffffc0368735c0 to 0xffffffc036874000) sg_set_bug expects that the buf parameter passed in should be from lowmem and a valid pageframe. This is not true for pages from dma_alloc_coherent which can be carveouts, hence the check fails. Change allocation of sg buffers from dma_coherent memory to kzalloc to fix the issue. Note that now dma_map/unmap is used to make the kzalloc'ed buffers coherent before passing it to the dmaengine. Signed-off-by: Sricharan R <sricharan@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-06-10 21:08:19 +03:00
qup->btx.tag.start = devm_kzalloc(&pdev->dev, 2, GFP_KERNEL);
if (!qup->btx.tag.start) {
ret = -ENOMEM;
goto fail_dma;
}
qup->is_dma = true;
}
nodma:
/* We support frequencies up to FAST Mode (400KHz) */
if (!clk_freq || clk_freq > 400000) {
dev_err(qup->dev, "clock frequency not supported %d\n",
clk_freq);
return -EINVAL;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
qup->base = devm_ioremap_resource(qup->dev, res);
if (IS_ERR(qup->base))
return PTR_ERR(qup->base);
qup->irq = platform_get_irq(pdev, 0);
if (qup->irq < 0) {
dev_err(qup->dev, "No IRQ defined\n");
return qup->irq;
}
if (has_acpi_companion(qup->dev)) {
ret = device_property_read_u32(qup->dev,
"src-clock-hz", &src_clk_freq);
if (ret) {
dev_notice(qup->dev, "using default src-clock-hz %d",
DEFAULT_SRC_CLK);
}
ACPI_COMPANION_SET(&qup->adap.dev, ACPI_COMPANION(qup->dev));
} else {
qup->clk = devm_clk_get(qup->dev, "core");
if (IS_ERR(qup->clk)) {
dev_err(qup->dev, "Could not get core clock\n");
return PTR_ERR(qup->clk);
}
qup->pclk = devm_clk_get(qup->dev, "iface");
if (IS_ERR(qup->pclk)) {
dev_err(qup->dev, "Could not get iface clock\n");
return PTR_ERR(qup->pclk);
}
qup_i2c_enable_clocks(qup);
src_clk_freq = clk_get_rate(qup->clk);
}
/*
* Bootloaders might leave a pending interrupt on certain QUP's,
* so we reset the core before registering for interrupts.
*/
writel(1, qup->base + QUP_SW_RESET);
ret = qup_i2c_poll_state_valid(qup);
if (ret)
goto fail;
ret = devm_request_irq(qup->dev, qup->irq, qup_i2c_interrupt,
IRQF_TRIGGER_HIGH, "i2c_qup", qup);
if (ret) {
dev_err(qup->dev, "Request %d IRQ failed\n", qup->irq);
goto fail;
}
disable_irq(qup->irq);
hw_ver = readl(qup->base + QUP_HW_VERSION);
dev_dbg(qup->dev, "Revision %x\n", hw_ver);
io_mode = readl(qup->base + QUP_IO_MODE);
/*
* The block/fifo size w.r.t. 'actual data' is 1/2 due to 'tag'
* associated with each byte written/received
*/
size = QUP_OUTPUT_BLOCK_SIZE(io_mode);
if (size >= ARRAY_SIZE(blk_sizes)) {
ret = -EIO;
goto fail;
}
qup->out_blk_sz = blk_sizes[size] / 2;
size = QUP_INPUT_BLOCK_SIZE(io_mode);
if (size >= ARRAY_SIZE(blk_sizes)) {
ret = -EIO;
goto fail;
}
qup->in_blk_sz = blk_sizes[size] / 2;
size = QUP_OUTPUT_FIFO_SIZE(io_mode);
qup->out_fifo_sz = qup->out_blk_sz * (2 << size);
size = QUP_INPUT_FIFO_SIZE(io_mode);
qup->in_fifo_sz = qup->in_blk_sz * (2 << size);
fs_div = ((src_clk_freq / clk_freq) / 2) - 3;
hs_div = 3;
qup->clk_ctl = (hs_div << 8) | (fs_div & 0xff);
/*
* Time it takes for a byte to be clocked out on the bus.
* Each byte takes 9 clock cycles (8 bits + 1 ack).
*/
one_bit_t = (USEC_PER_SEC / clk_freq) + 1;
qup->one_byte_t = one_bit_t * 9;
dev_dbg(qup->dev, "IN:block:%d, fifo:%d, OUT:block:%d, fifo:%d\n",
qup->in_blk_sz, qup->in_fifo_sz,
qup->out_blk_sz, qup->out_fifo_sz);
i2c_set_adapdata(&qup->adap, qup);
qup->adap.dev.parent = qup->dev;
qup->adap.dev.of_node = pdev->dev.of_node;
qup->is_last = true;
strlcpy(qup->adap.name, "QUP I2C adapter", sizeof(qup->adap.name));
pm_runtime_set_autosuspend_delay(qup->dev, MSEC_PER_SEC);
pm_runtime_use_autosuspend(qup->dev);
pm_runtime_set_active(qup->dev);
pm_runtime_enable(qup->dev);
ret = i2c_add_adapter(&qup->adap);
if (ret)
goto fail_runtime;
return 0;
fail_runtime:
pm_runtime_disable(qup->dev);
pm_runtime_set_suspended(qup->dev);
fail:
qup_i2c_disable_clocks(qup);
fail_dma:
if (qup->btx.dma)
dma_release_channel(qup->btx.dma);
if (qup->brx.dma)
dma_release_channel(qup->brx.dma);
return ret;
}
static int qup_i2c_remove(struct platform_device *pdev)
{
struct qup_i2c_dev *qup = platform_get_drvdata(pdev);
if (qup->is_dma) {
dma_release_channel(qup->btx.dma);
dma_release_channel(qup->brx.dma);
}
disable_irq(qup->irq);
qup_i2c_disable_clocks(qup);
i2c_del_adapter(&qup->adap);
pm_runtime_disable(qup->dev);
pm_runtime_set_suspended(qup->dev);
return 0;
}
#ifdef CONFIG_PM
static int qup_i2c_pm_suspend_runtime(struct device *device)
{
struct qup_i2c_dev *qup = dev_get_drvdata(device);
dev_dbg(device, "pm_runtime: suspending...\n");
qup_i2c_disable_clocks(qup);
return 0;
}
static int qup_i2c_pm_resume_runtime(struct device *device)
{
struct qup_i2c_dev *qup = dev_get_drvdata(device);
dev_dbg(device, "pm_runtime: resuming...\n");
qup_i2c_enable_clocks(qup);
return 0;
}
#endif
#ifdef CONFIG_PM_SLEEP
static int qup_i2c_suspend(struct device *device)
{
if (!pm_runtime_suspended(device))
return qup_i2c_pm_suspend_runtime(device);
return 0;
}
static int qup_i2c_resume(struct device *device)
{
qup_i2c_pm_resume_runtime(device);
pm_runtime_mark_last_busy(device);
pm_request_autosuspend(device);
return 0;
}
#endif
static const struct dev_pm_ops qup_i2c_qup_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(
qup_i2c_suspend,
qup_i2c_resume)
SET_RUNTIME_PM_OPS(
qup_i2c_pm_suspend_runtime,
qup_i2c_pm_resume_runtime,
NULL)
};
static const struct of_device_id qup_i2c_dt_match[] = {
{ .compatible = "qcom,i2c-qup-v1.1.1" },
{ .compatible = "qcom,i2c-qup-v2.1.1" },
{ .compatible = "qcom,i2c-qup-v2.2.1" },
{}
};
MODULE_DEVICE_TABLE(of, qup_i2c_dt_match);
#if IS_ENABLED(CONFIG_ACPI)
static const struct acpi_device_id qup_i2c_acpi_match[] = {
{ "QCOM8010"},
{ },
};
MODULE_DEVICE_TABLE(acpi, qup_i2c_acpi_match);
#endif
static struct platform_driver qup_i2c_driver = {
.probe = qup_i2c_probe,
.remove = qup_i2c_remove,
.driver = {
.name = "i2c_qup",
.pm = &qup_i2c_qup_pm_ops,
.of_match_table = qup_i2c_dt_match,
.acpi_match_table = ACPI_PTR(qup_i2c_acpi_match),
},
};
module_platform_driver(qup_i2c_driver);
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:i2c_qup");