microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/arch/arm/configs/u8500_defconfig

187 строки
4.2 KiB
Plaintext
Исходник Обычный вид История

ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 07:43:53 +03:00
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
ARM: ux500: update defconfig Update the ux500 defconfig to match the latest output of savedefconfig. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-10 18:21:02 +04:00
CONFIG_NO_HZ_IDLE=y
ARM: ux500: update defconfig base Update the defconfig removing/adding selections due to Kconfig changes, and select some new hardware drivers that have been matured in the tree. For example: - CONFIG_NO_HZ and CONFIG_HIGH_RES_TIMERS come from the make oldconfig changes after the recent changes to how NOHZ is handled. - The U5500 config option is now gone as the machine is deleted. So is the AB5500 driver. - CPU_IDLE selected explicitly. - LP5521 Kconfig has been moved around. - AB8500 core is default-selected, as is the AB8500 USB transciever. - The battery and charging management drivers for the AB8500 are not selected again. - Select the crypto devices that have been shaped up to work properly. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-24 10:51:25 +04:00
CONFIG_HIGH_RES_TIMERS=y
ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 07:43:53 +03:00
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
CONFIG_ARCH_U8500=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
ARM: ux500: enable appended dtb in u8500_defconfig Churns the rest of the file a bit due to reordering of options, but the only changes are: CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-30 20:08:07 +04:00
CONFIG_HIGHMEM=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 07:43:53 +03:00
CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 11:08:41 +03:00
CONFIG_CPU_FREQ=y
ARM: defconfig: u8500: activate cpufreq This activates the device tree-based cpufreq driver that Ux500 is using and enables the schedutil and ondemand governors with schedutil as default. This works fine in the setups I have tested. Link: https://lore.kernel.org/r/20191217202648.23206-1-linus.walleij@linaro.org Cc: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-17 23:26:48 +03:00
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPUFREQ_DT=y
ARM: ux500: update defconfig base Update the defconfig removing/adding selections due to Kconfig changes, and select some new hardware drivers that have been matured in the tree. For example: - CONFIG_NO_HZ and CONFIG_HIGH_RES_TIMERS come from the make oldconfig changes after the recent changes to how NOHZ is handled. - The U5500 config option is now gone as the machine is deleted. So is the AB5500 driver. - CPU_IDLE selected explicitly. - LP5521 Kconfig has been moved around. - AB8500 core is default-selected, as is the AB8500 USB transciever. - The battery and charging management drivers for the AB8500 are not selected again. - Select the crypto devices that have been shaped up to work properly. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-24 10:51:25 +04:00
CONFIG_CPU_IDLE=y
ARM: ux500: u8500_defconfig: add missing cpuidle option With the commit d3f2950f2adeea3da0317e952914b59adaa4cdb3, the option ARM_U8500_CPUIDLE was added to the Kconfig but not reflected in the default config file, hence the cpuidle driver is no longer enabled since this commit. Enable it again by adding the missing option in the default config file. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-30 15:36:36 +04:00
CONFIG_ARM_U8500_CPUIDLE=y
ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 07:43:53 +03:00
CONFIG_VFP=y
CONFIG_NEON=y
ARM: defconfig: u8500: Refresh defconfig This refreshes the outdated U8500 defconfig: some options moved around, PS/2 mouse is no longer default on, crypto options moved around etc. Link: https://lore.kernel.org/r/20190723081523.13079-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-23 11:15:22 +03:00
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
ARM: defconfig: u8500: Add new drivers This enables the new or updates driver options for U8500 that got merged into v5.3-rc1: - CMA, MCDE driver, LIMA driver and the Samsung S6D16D0 driver enabled by default bringing up the new graphics support. Include the LOGO so we can see when the graphics are live. - We use the IIO hwmon bridge for reflecting temperature in the system. - Set MUSB to PIO mode as this is the one working most stable for the time being. - HWSPINLOCK needs to be set to get the hardware semaphore driver to compile and link properly. Link: https://lore.kernel.org/r/20190723081523.13079-2-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-23 11:15:23 +03:00
CONFIG_CMA=y
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 11:08:41 +03:00
CONFIG_NET=y
mach-ux500: add configs for snowball board Adds defconfig entries needed to boot a single ux500 kernel on the Snowball board. Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
2011-06-21 16:01:02 +04:00
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_NETFILTER=y
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 11:08:41 +03:00
CONFIG_PHONET=y
ARM: defconfig: u8500: Enable new drivers for samsung-golden The new device tree for samsung-golden depends on some additional drivers that are not selected in the u8500 defconfig yet: - Bluetooth: hci_bcm - WiFi: brcmfmac - Touchscreen: atmel_mxt_ts - Vibrator: gpio-vibra - Sensors: inv_mpu6050 (IMU) Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20191219202052.19039-10-stephan@gerhold.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-19 23:20:52 +03:00
CONFIG_BT=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_BCM=y
ARM: ux500: configure for CW1200 WLAN chip The CW1200 WLAN chip driver had been in the kernel for a while, we only need to activate it for the Ux500 properly. The latter require some elaborative work, but in the meantime, let's make sure we atleast compile it in. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-14 13:08:26 +04:00
CONFIG_CFG80211=y
CONFIG_CFG80211_DEBUGFS=y
CONFIG_MAC80211=y
CONFIG_MAC80211_LEDS=y
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 11:08:41 +03:00
CONFIG_CAIF=y
ARM: ux500: u8500_defconfig: Enable PARTITION_ADVANCED There are both (e)MMC/SD-card support in ux500, thus it's reasonable to support partitions for block devices as default. While updating the defconfig, we rebase it towards Kconfig changes. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-26 17:19:07 +04:00
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 07:43:53 +03:00
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=65536
mach-ux500: add configs for snowball board Adds defconfig entries needed to boot a single ux500 kernel on the Snowball board. Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
2011-06-21 16:01:02 +04:00
CONFIG_NETDEVICES=y
CONFIG_SMSC911X=y
ARM: ux500: update defconfig This updates the Ux500 defconfig with the new drivers for HWSEM and AB5500 core that were merged in the 3.2 cycle. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-11-16 23:30:35 +04:00
CONFIG_SMSC_PHY=y
ARM: defconfig: u8500: Enable new drivers for samsung-golden The new device tree for samsung-golden depends on some additional drivers that are not selected in the u8500 defconfig yet: - Bluetooth: hci_bcm - WiFi: brcmfmac - Touchscreen: atmel_mxt_ts - Vibrator: gpio-vibra - Sensors: inv_mpu6050 (IMU) Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20191219202052.19039-10-stephan@gerhold.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-19 23:20:52 +03:00
CONFIG_BRCMFMAC=m
ARM: ux500: configure for CW1200 WLAN chip The CW1200 WLAN chip driver had been in the kernel for a while, we only need to activate it for the Ux500 properly. The latter require some elaborative work, but in the meantime, let's make sure we atleast compile it in. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-14 13:08:26 +04:00
CONFIG_CW1200=y
CONFIG_CW1200_WLAN_SDIO=y
ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 07:43:53 +03:00
CONFIG_INPUT_EVDEV=y
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 11:08:41 +03:00
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_NOMADIK=y
CONFIG_KEYBOARD_STMPE=y
CONFIG_KEYBOARD_TC3589X=y
ARM: configs: ux500: Update for new drivers Some new driver support for the Ux500 devices landed in v5.12-rc1 so update the defconfig to use them: - TM2 touchkey, used on the Golden and Janice. - SPI GPIO, used for the Janice display control. - NTC thermistor, used for the HREF temperature sensors. - V4L2 flash control that gives support for LED torch to userspaces such as Phosh. - The LEDs Flash class and RT8515 Flash/torch LED driver used in all the Samsung mobiles. - FSA9480 extcon, used by Janice. - BMC150 accelerometer, used by Janice. - IIO rescaler, used for thermistors and ALS on Janice. - MPU3050 gyroscope driver used by Janice. - Yamaha YAS530 magnetometer driver used by Janice. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210301232050.1457397-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-03-02 02:20:50 +03:00
CONFIG_KEYBOARD_TM2_TOUCHKEY=y
ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 07:43:53 +03:00
# CONFIG_INPUT_MOUSE is not set
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 11:08:41 +03:00
CONFIG_INPUT_TOUCHSCREEN=y
ARM: defconfig: u8500: Enable new drivers for samsung-golden The new device tree for samsung-golden depends on some additional drivers that are not selected in the u8500 defconfig yet: - Bluetooth: hci_bcm - WiFi: brcmfmac - Touchscreen: atmel_mxt_ts - Vibrator: gpio-vibra - Sensors: inv_mpu6050 (IMU) Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20191219202052.19039-10-stephan@gerhold.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-19 23:20:52 +03:00
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 11:08:41 +03:00
CONFIG_TOUCHSCREEN_BU21013=y
ARM: config: ux500: Update U8500 defconfig This updates the defconfig for the U8500 platform with some of the changes from the v5.9 and v5.10 kernel cycles: - No need to select the schedutil cpufreq governor because it is the default now. - Enable the CY8CTMA140 touchscreen as used on the Samsung Skomer GT-S7710. - Enable the Samsung S6E63M0 DSI panel as used on the Samsung Golden GT-I8810. - Enable the KTD253 backlight as used on the Samsung Skomer GT-S7710. - Drop CONFIG_USB as we only use the gadget mode of the MUSB driver. - Add selection of the CONFIG_LEDS_LP55XX_COMMON lest the LP5521 LEDs will not work. - Move the config entry for CONFIG_DEBUG_FS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20201105134510.1417639-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-05 16:45:10 +03:00
CONFIG_TOUCHSCREEN_CY8CTMA140=y
ARM: configs: Update u8500_defconfig The platform lost the framebuffer due to a commit solving a circular dependency in v5.14-rc1, so add it back in by explicitly selecting the framebuffer. The U8500 has also gained a few systems using touchscreens from Cypress, Melfas and Zinitix so add these at the same time as we're updating the defconfig anyway. Fixes: f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: phone-devel@vger.kernel.org Cc: Kees Cook <keescook@chromium.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Stephan Gerhold <stephan@gerhold.net> Cc: newbyte@disroot.org Link: https://lore.kernel.org/r/20210712085522.672482-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-12 11:55:22 +03:00
CONFIG_TOUCHSCREEN_CYTTSP_CORE=y
CONFIG_TOUCHSCREEN_CYTTSP_SPI=y
CONFIG_TOUCHSCREEN_MMS114=y
CONFIG_TOUCHSCREEN_ZINITIX=y
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 11:08:41 +03:00
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AB8500_PONKEY=y
ARM: defconfig: u8500: Enable new drivers for samsung-golden The new device tree for samsung-golden depends on some additional drivers that are not selected in the u8500 defconfig yet: - Bluetooth: hci_bcm - WiFi: brcmfmac - Touchscreen: atmel_mxt_ts - Vibrator: gpio-vibra - Sensors: inv_mpu6050 (IMU) Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20191219202052.19039-10-stephan@gerhold.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-19 23:20:52 +03:00
CONFIG_INPUT_GPIO_VIBRA=y
ARM: u8500_defconfig: turn on the Synaptics RMI4 driver The Ux500 boards may have an RMI4 unit, and the DT fragments for them have been merged upstream. Add it to the defconfig. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-03-21 11:50:37 +03:00
CONFIG_RMI4_CORE=y
CONFIG_RMI4_I2C=y
CONFIG_RMI4_F11=y
ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 07:43:53 +03:00
# CONFIG_SERIO is not set
mach-ux500: add configs for snowball board Adds defconfig entries needed to boot a single ux500 kernel on the Snowball board. Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
2011-06-21 16:01:02 +04:00
# CONFIG_LEGACY_PTYS is not set
ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 07:43:53 +03:00
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
ARM: defconfig: u8500: Enable new drivers for samsung-golden The new device tree for samsung-golden depends on some additional drivers that are not selected in the u8500 defconfig yet: - Bluetooth: hci_bcm - WiFi: brcmfmac - Touchscreen: atmel_mxt_ts - Vibrator: gpio-vibra - Sensors: inv_mpu6050 (IMU) Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20191219202052.19039-10-stephan@gerhold.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-19 23:20:52 +03:00
CONFIG_SERIAL_DEV_BUS=y
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 11:08:41 +03:00
CONFIG_HW_RANDOM=y
ARM: defconfig: u8500: Enable new drivers for ux500 The new device tree for samsung-skomer and the HREF520 devicetree enables some additional drivers that are not yet selected in the u8500_defconfig: - The GPIO-based I2C bus master driver for some peripherals that do not use the I2C hardware master. - The Novatek NT35510 driver for the Skomer panel. - The Sony ACX424AKP driver for the HREF520 panel. - The GPIO-based backlight driver for Skomer. - The BMA180 driver for the BMA254 accelerometer found in the Skomer. - The new GP2AP002 driver for the GP2AP002S00F proximimty sensor found in the Skomer and Golden devices. Cc: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-04-14 11:57:18 +03:00
CONFIG_I2C_GPIO=y
ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 07:43:53 +03:00
CONFIG_SPI=y
ARM: configs: ux500: Update for new drivers Some new driver support for the Ux500 devices landed in v5.12-rc1 so update the defconfig to use them: - TM2 touchkey, used on the Golden and Janice. - SPI GPIO, used for the Janice display control. - NTC thermistor, used for the HREF temperature sensors. - V4L2 flash control that gives support for LED torch to userspaces such as Phosh. - The LEDs Flash class and RT8515 Flash/torch LED driver used in all the Samsung mobiles. - FSA9480 extcon, used by Janice. - BMC150 accelerometer, used by Janice. - IIO rescaler, used for thermistors and ALS on Janice. - MPU3050 gyroscope driver used by Janice. - Yamaha YAS530 magnetometer driver used by Janice. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210301232050.1457397-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-03-02 02:20:50 +03:00
CONFIG_SPI_GPIO=y
ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 07:43:53 +03:00
CONFIG_SPI_PL022=y
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 11:08:41 +03:00
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
ARM: defconfig: u8500: Add new drivers This enables the new or updates driver options for U8500 that got merged into v5.3-rc1: - CMA, MCDE driver, LIMA driver and the Samsung S6D16D0 driver enabled by default bringing up the new graphics support. Include the LOGO so we can see when the graphics are live. - We use the IIO hwmon bridge for reflecting temperature in the system. - Set MUSB to PIO mode as this is the one working most stable for the time being. - HWSPINLOCK needs to be set to get the hardware semaphore driver to compile and link properly. Link: https://lore.kernel.org/r/20190723081523.13079-2-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-23 11:15:23 +03:00
CONFIG_SENSORS_IIO_HWMON=y
ARM: configs: ux500: Update for new drivers Some new driver support for the Ux500 devices landed in v5.12-rc1 so update the defconfig to use them: - TM2 touchkey, used on the Golden and Janice. - SPI GPIO, used for the Janice display control. - NTC thermistor, used for the HREF temperature sensors. - V4L2 flash control that gives support for LED torch to userspaces such as Phosh. - The LEDs Flash class and RT8515 Flash/torch LED driver used in all the Samsung mobiles. - FSA9480 extcon, used by Janice. - BMC150 accelerometer, used by Janice. - IIO rescaler, used for thermistors and ALS on Janice. - MPU3050 gyroscope driver used by Janice. - Yamaha YAS530 magnetometer driver used by Janice. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210301232050.1457397-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-03-02 02:20:50 +03:00
CONFIG_SENSORS_NTC_THERMISTOR=y
Thermal: Add ST-Ericsson DB8500 thermal properties and platform data. This patch adds device tree properties for ST-Ericsson DB8500 thermal driver, also adds the platform data to support the old fashion. Signed-off-by: hongbo.zhang <hongbo.zhang@linaro.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-11-15 14:56:43 +04:00
CONFIG_THERMAL=y
CONFIG_CPU_THERMAL=y
ARM: ux500: select WATCHDOG and MUSB for ux500 Enable ux500 specific USB and watchdog drivers by default on u8500_defconfig. Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-21 16:31:53 +04:00
CONFIG_WATCHDOG=y
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 11:08:41 +03:00
CONFIG_MFD_STMPE=y
CONFIG_MFD_TC3589X=y
ARM: ux500: update defconfig base Update the defconfig removing/adding selections due to Kconfig changes, and select some new hardware drivers that have been matured in the tree. For example: - CONFIG_NO_HZ and CONFIG_HIGH_RES_TIMERS come from the make oldconfig changes after the recent changes to how NOHZ is handled. - The U5500 config option is now gone as the machine is deleted. So is the AB5500 driver. - CPU_IDLE selected explicitly. - LP5521 Kconfig has been moved around. - AB8500 core is default-selected, as is the AB8500 USB transciever. - The battery and charging management drivers for the AB8500 are not selected again. - Select the crypto devices that have been shaped up to work properly. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-24 10:51:25 +04:00
CONFIG_REGULATOR_AB8500=y
ARM: ux500: enable appended dtb in u8500_defconfig Churns the rest of the file a bit due to reordering of options, but the only changes are: CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-30 20:08:07 +04:00
CONFIG_REGULATOR_GPIO=y
ARM: configs: ux500: Update for new drivers Some new driver support for the Ux500 devices landed in v5.12-rc1 so update the defconfig to use them: - TM2 touchkey, used on the Golden and Janice. - SPI GPIO, used for the Janice display control. - NTC thermistor, used for the HREF temperature sensors. - V4L2 flash control that gives support for LED torch to userspaces such as Phosh. - The LEDs Flash class and RT8515 Flash/torch LED driver used in all the Samsung mobiles. - FSA9480 extcon, used by Janice. - BMC150 accelerometer, used by Janice. - IIO rescaler, used for thermistors and ALS on Janice. - MPU3050 gyroscope driver used by Janice. - Yamaha YAS530 magnetometer driver used by Janice. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210301232050.1457397-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-03-02 02:20:50 +03:00
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_V4L2_FLASH_LED_CLASS=y
ARM: defconfig: u8500: Add new drivers This enables the new or updates driver options for U8500 that got merged into v5.3-rc1: - CMA, MCDE driver, LIMA driver and the Samsung S6D16D0 driver enabled by default bringing up the new graphics support. Include the LOGO so we can see when the graphics are live. - We use the IIO hwmon bridge for reflecting temperature in the system. - Set MUSB to PIO mode as this is the one working most stable for the time being. - HWSPINLOCK needs to be set to get the hardware semaphore driver to compile and link properly. Link: https://lore.kernel.org/r/20190723081523.13079-2-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-23 11:15:23 +03:00
CONFIG_DRM=y
ARM: defconfig: u8500: Enable new drivers for ux500 The new device tree for samsung-skomer and the HREF520 devicetree enables some additional drivers that are not yet selected in the u8500_defconfig: - The GPIO-based I2C bus master driver for some peripherals that do not use the I2C hardware master. - The Novatek NT35510 driver for the Skomer panel. - The Sony ACX424AKP driver for the HREF520 panel. - The GPIO-based backlight driver for Skomer. - The BMA180 driver for the BMA254 accelerometer found in the Skomer. - The new GP2AP002 driver for the GP2AP002S00F proximimty sensor found in the Skomer and Golden devices. Cc: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-04-14 11:57:18 +03:00
CONFIG_DRM_PANEL_NOVATEK_NT35510=y
ARM: defconfig: u8500: Add new drivers This enables the new or updates driver options for U8500 that got merged into v5.3-rc1: - CMA, MCDE driver, LIMA driver and the Samsung S6D16D0 driver enabled by default bringing up the new graphics support. Include the LOGO so we can see when the graphics are live. - We use the IIO hwmon bridge for reflecting temperature in the system. - Set MUSB to PIO mode as this is the one working most stable for the time being. - HWSPINLOCK needs to be set to get the hardware semaphore driver to compile and link properly. Link: https://lore.kernel.org/r/20190723081523.13079-2-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-23 11:15:23 +03:00
CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=y
ARM: config: ux500: Update U8500 defconfig This updates the defconfig for the U8500 platform with some of the changes from the v5.9 and v5.10 kernel cycles: - No need to select the schedutil cpufreq governor because it is the default now. - Enable the CY8CTMA140 touchscreen as used on the Samsung Skomer GT-S7710. - Enable the Samsung S6E63M0 DSI panel as used on the Samsung Golden GT-I8810. - Enable the KTD253 backlight as used on the Samsung Skomer GT-S7710. - Drop CONFIG_USB as we only use the gadget mode of the MUSB driver. - Add selection of the CONFIG_LEDS_LP55XX_COMMON lest the LP5521 LEDs will not work. - Move the config entry for CONFIG_DEBUG_FS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20201105134510.1417639-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-05 16:45:10 +03:00
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI=y
ARM: defconfig: u8500: Enable new drivers for ux500 The new device tree for samsung-skomer and the HREF520 devicetree enables some additional drivers that are not yet selected in the u8500_defconfig: - The GPIO-based I2C bus master driver for some peripherals that do not use the I2C hardware master. - The Novatek NT35510 driver for the Skomer panel. - The Sony ACX424AKP driver for the HREF520 panel. - The GPIO-based backlight driver for Skomer. - The BMA180 driver for the BMA254 accelerometer found in the Skomer. - The new GP2AP002 driver for the GP2AP002S00F proximimty sensor found in the Skomer and Golden devices. Cc: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-04-14 11:57:18 +03:00
CONFIG_DRM_PANEL_SONY_ACX424AKP=y
ARM: defconfig: u8500: Add new drivers This enables the new or updates driver options for U8500 that got merged into v5.3-rc1: - CMA, MCDE driver, LIMA driver and the Samsung S6D16D0 driver enabled by default bringing up the new graphics support. Include the LOGO so we can see when the graphics are live. - We use the IIO hwmon bridge for reflecting temperature in the system. - Set MUSB to PIO mode as this is the one working most stable for the time being. - HWSPINLOCK needs to be set to get the hardware semaphore driver to compile and link properly. Link: https://lore.kernel.org/r/20190723081523.13079-2-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-23 11:15:23 +03:00
CONFIG_DRM_LIMA=y
CONFIG_DRM_MCDE=y
ARM: configs: Update u8500_defconfig The platform lost the framebuffer due to a commit solving a circular dependency in v5.14-rc1, so add it back in by explicitly selecting the framebuffer. The U8500 has also gained a few systems using touchscreens from Cypress, Melfas and Zinitix so add these at the same time as we're updating the defconfig anyway. Fixes: f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: phone-devel@vger.kernel.org Cc: Kees Cook <keescook@chromium.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Stephan Gerhold <stephan@gerhold.net> Cc: newbyte@disroot.org Link: https://lore.kernel.org/r/20210712085522.672482-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-12 11:55:22 +03:00
CONFIG_FB=y
ARM: defconfig: u8500: Add new drivers This enables the new or updates driver options for U8500 that got merged into v5.3-rc1: - CMA, MCDE driver, LIMA driver and the Samsung S6D16D0 driver enabled by default bringing up the new graphics support. Include the LOGO so we can see when the graphics are live. - We use the IIO hwmon bridge for reflecting temperature in the system. - Set MUSB to PIO mode as this is the one working most stable for the time being. - HWSPINLOCK needs to be set to get the hardware semaphore driver to compile and link properly. Link: https://lore.kernel.org/r/20190723081523.13079-2-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-23 11:15:23 +03:00
CONFIG_BACKLIGHT_CLASS_DEVICE=y
ARM: config: ux500: Update U8500 defconfig This updates the defconfig for the U8500 platform with some of the changes from the v5.9 and v5.10 kernel cycles: - No need to select the schedutil cpufreq governor because it is the default now. - Enable the CY8CTMA140 touchscreen as used on the Samsung Skomer GT-S7710. - Enable the Samsung S6E63M0 DSI panel as used on the Samsung Golden GT-I8810. - Enable the KTD253 backlight as used on the Samsung Skomer GT-S7710. - Drop CONFIG_USB as we only use the gadget mode of the MUSB driver. - Add selection of the CONFIG_LEDS_LP55XX_COMMON lest the LP5521 LEDs will not work. - Move the config entry for CONFIG_DEBUG_FS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20201105134510.1417639-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-05 16:45:10 +03:00
CONFIG_BACKLIGHT_KTD253=y
ARM: defconfig: u8500: Enable new drivers for ux500 The new device tree for samsung-skomer and the HREF520 devicetree enables some additional drivers that are not yet selected in the u8500_defconfig: - The GPIO-based I2C bus master driver for some peripherals that do not use the I2C hardware master. - The Novatek NT35510 driver for the Skomer panel. - The Sony ACX424AKP driver for the HREF520 panel. - The GPIO-based backlight driver for Skomer. - The BMA180 driver for the BMA254 accelerometer found in the Skomer. - The new GP2AP002 driver for the GP2AP002S00F proximimty sensor found in the Skomer and Golden devices. Cc: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-04-14 11:57:18 +03:00
CONFIG_BACKLIGHT_GPIO=y
ARM: defconfig: u8500: Add new drivers This enables the new or updates driver options for U8500 that got merged into v5.3-rc1: - CMA, MCDE driver, LIMA driver and the Samsung S6D16D0 driver enabled by default bringing up the new graphics support. Include the LOGO so we can see when the graphics are live. - We use the IIO hwmon bridge for reflecting temperature in the system. - Set MUSB to PIO mode as this is the one working most stable for the time being. - HWSPINLOCK needs to be set to get the hardware semaphore driver to compile and link properly. Link: https://lore.kernel.org/r/20190723081523.13079-2-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-23 11:15:23 +03:00
CONFIG_LOGO=y
ARM: ux500: select SND_SOC_UX500 for ux500 Enable ux500 specific ALSA SoC drivers by default on u8500_defconfig. Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-24 17:28:13 +04:00
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_UX500=y
CONFIG_SND_SOC_UX500_MACH_MOP500=y
ARM: ux500: select WATCHDOG and MUSB for ux500 Enable ux500 specific USB and watchdog drivers by default on u8500_defconfig. Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-21 16:31:53 +04:00
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_UX500=y
ARM: defconfig: u8500: Add new drivers This enables the new or updates driver options for U8500 that got merged into v5.3-rc1: - CMA, MCDE driver, LIMA driver and the Samsung S6D16D0 driver enabled by default bringing up the new graphics support. Include the LOGO so we can see when the graphics are live. - We use the IIO hwmon bridge for reflecting temperature in the system. - Set MUSB to PIO mode as this is the one working most stable for the time being. - HWSPINLOCK needs to be set to get the hardware semaphore driver to compile and link properly. Link: https://lore.kernel.org/r/20190723081523.13079-2-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-23 11:15:23 +03:00
CONFIG_MUSB_PIO_ONLY=y
ARM: ux500: update defconfig base Update the defconfig removing/adding selections due to Kconfig changes, and select some new hardware drivers that have been matured in the tree. For example: - CONFIG_NO_HZ and CONFIG_HIGH_RES_TIMERS come from the make oldconfig changes after the recent changes to how NOHZ is handled. - The U5500 config option is now gone as the machine is deleted. So is the AB5500 driver. - CPU_IDLE selected explicitly. - LP5521 Kconfig has been moved around. - AB8500 core is default-selected, as is the AB8500 USB transciever. - The battery and charging management drivers for the AB8500 are not selected again. - Select the crypto devices that have been shaped up to work properly. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-24 10:51:25 +04:00
CONFIG_AB8500_USB=y
mach-ux500: activate USB in the U8500 defconfig Activate the new USB stuff so we atleast get some compile coverage for this stuff. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-01 18:09:52 +03:00
CONFIG_USB_GADGET=y
ARM: ux500: select WATCHDOG and MUSB for ux500 Enable ux500 specific USB and watchdog drivers by default on u8500_defconfig. Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-21 16:31:53 +04:00
CONFIG_USB_ETH=m
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 11:08:41 +03:00
CONFIG_MMC=y
CONFIG_MMC_ARMMMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
ARM: configs: ux500: Update for new drivers Some new driver support for the Ux500 devices landed in v5.12-rc1 so update the defconfig to use them: - TM2 touchkey, used on the Golden and Janice. - SPI GPIO, used for the Janice display control. - NTC thermistor, used for the HREF temperature sensors. - V4L2 flash control that gives support for LED torch to userspaces such as Phosh. - The LEDs Flash class and RT8515 Flash/torch LED driver used in all the Samsung mobiles. - FSA9480 extcon, used by Janice. - BMC150 accelerometer, used by Janice. - IIO rescaler, used for thermistors and ALS on Janice. - MPU3050 gyroscope driver used by Janice. - Yamaha YAS530 magnetometer driver used by Janice. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210301232050.1457397-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-03-02 02:20:50 +03:00
CONFIG_LEDS_CLASS_FLASH=y
mach-ux500: add configs for snowball board Adds defconfig entries needed to boot a single ux500 kernel on the Snowball board. Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
2011-06-21 16:01:02 +04:00
CONFIG_LEDS_LM3530=y
ARM: ux500: don't select LEDS_GPIO for snowball Using 'select' in Kconfig is hard, a platform cannot just enable a driver without also making sure that its subsystem is there. Also, there is no actual code dependency between the platform and the gpio leds driver. Without this patch, building without LEDS_CLASS esults in: drivers/built-in.o: In function `create_gpio_led.part.2': governor_userspace.c:(.devinit.text+0x5a58): undefined reference to `led_classdev_register' drivers/built-in.o: In function `gpio_led_remove': governor_userspace.c:(.devexit.text+0x6b8): undefined reference to `led_classdev_unregister' This reverts 8733f53c6 "ARM: ux500: Kconfig: Compile in leds-gpio support for Snowball" that introduced the regression and did not provide a helpful explanation. In order to leave the GPIO LED code still present in normal builds, this also enables the symbol in u8500_defconfig, in addition to the other LED drivers that are already selected there. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Lee Jones <lee.jones@linaro.org>
2012-08-16 00:34:48 +04:00
CONFIG_LEDS_GPIO=y
ARM: config: ux500: Update U8500 defconfig This updates the defconfig for the U8500 platform with some of the changes from the v5.9 and v5.10 kernel cycles: - No need to select the schedutil cpufreq governor because it is the default now. - Enable the CY8CTMA140 touchscreen as used on the Samsung Skomer GT-S7710. - Enable the Samsung S6E63M0 DSI panel as used on the Samsung Golden GT-I8810. - Enable the KTD253 backlight as used on the Samsung Skomer GT-S7710. - Drop CONFIG_USB as we only use the gadget mode of the MUSB driver. - Add selection of the CONFIG_LEDS_LP55XX_COMMON lest the LP5521 LEDs will not work. - Move the config entry for CONFIG_DEBUG_FS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20201105134510.1417639-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-05 16:45:10 +03:00
CONFIG_LEDS_LP55XX_COMMON=y
ARM: ux500: update defconfig base Update the defconfig removing/adding selections due to Kconfig changes, and select some new hardware drivers that have been matured in the tree. For example: - CONFIG_NO_HZ and CONFIG_HIGH_RES_TIMERS come from the make oldconfig changes after the recent changes to how NOHZ is handled. - The U5500 config option is now gone as the machine is deleted. So is the AB5500 driver. - CPU_IDLE selected explicitly. - LP5521 Kconfig has been moved around. - AB8500 core is default-selected, as is the AB8500 USB transciever. - The battery and charging management drivers for the AB8500 are not selected again. - Select the crypto devices that have been shaped up to work properly. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-24 10:51:25 +04:00
CONFIG_LEDS_LP5521=y
ARM: configs: ux500: Update for new drivers Some new driver support for the Ux500 devices landed in v5.12-rc1 so update the defconfig to use them: - TM2 touchkey, used on the Golden and Janice. - SPI GPIO, used for the Janice display control. - NTC thermistor, used for the HREF temperature sensors. - V4L2 flash control that gives support for LED torch to userspaces such as Phosh. - The LEDs Flash class and RT8515 Flash/torch LED driver used in all the Samsung mobiles. - FSA9480 extcon, used by Janice. - BMC150 accelerometer, used by Janice. - IIO rescaler, used for thermistors and ALS on Janice. - MPU3050 gyroscope driver used by Janice. - Yamaha YAS530 magnetometer driver used by Janice. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210301232050.1457397-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-03-02 02:20:50 +03:00
CONFIG_LEDS_RT8515=y
ARM: ux500: Turn on the 'heartbeat' LED trigger The heartbeat LED trigger provides an excellent debugging tool when hacking on development boards. Here we enable it on all u8500 based platforms. This will pulse the User LED on the Snowball low-cost development board only. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-21 17:35:40 +04:00
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 11:08:41 +03:00
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AB8500=y
CONFIG_RTC_DRV_PL031=y
CONFIG_DMADEVICES=y
CONFIG_STE_DMA40=y
ARM: defconfig: u8500: Add new drivers This enables the new or updates driver options for U8500 that got merged into v5.3-rc1: - CMA, MCDE driver, LIMA driver and the Samsung S6D16D0 driver enabled by default bringing up the new graphics support. Include the LOGO so we can see when the graphics are live. - We use the IIO hwmon bridge for reflecting temperature in the system. - Set MUSB to PIO mode as this is the one working most stable for the time being. - HWSPINLOCK needs to be set to get the hardware semaphore driver to compile and link properly. Link: https://lore.kernel.org/r/20190723081523.13079-2-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-23 11:15:23 +03:00
CONFIG_HWSPINLOCK=y
ARM: ux500: update defconfig This updates the Ux500 defconfig with the new drivers for HWSEM and AB5500 core that were merged in the 3.2 cycle. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-11-16 23:30:35 +04:00
CONFIG_HSEM_U8500=y
ARM: configs: ux500: Update for new drivers Some new driver support for the Ux500 devices landed in v5.12-rc1 so update the defconfig to use them: - TM2 touchkey, used on the Golden and Janice. - SPI GPIO, used for the Janice display control. - NTC thermistor, used for the HREF temperature sensors. - V4L2 flash control that gives support for LED torch to userspaces such as Phosh. - The LEDs Flash class and RT8515 Flash/torch LED driver used in all the Samsung mobiles. - FSA9480 extcon, used by Janice. - BMC150 accelerometer, used by Janice. - IIO rescaler, used for thermistors and ALS on Janice. - MPU3050 gyroscope driver used by Janice. - Yamaha YAS530 magnetometer driver used by Janice. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210301232050.1457397-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-03-02 02:20:50 +03:00
CONFIG_EXTCON_FSA9480=y
ARM: ux500: configure in sensors This enables the STMicroelectronics MEMS sensors for accelerometer, gyroscope, magnetometer and pressure that are mounted on the Ux500 models. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-10 18:31:53 +04:00
CONFIG_IIO=y
ARM: defconfig: update U8500 defconfig Some config options like perf events and PM are now implicit, we have an upstream driver for the AK8974, and we really want the HRTIMER software triggers from configfs with some of the sensors. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-10-17 12:23:49 +03:00
CONFIG_IIO_SW_TRIGGER=y
ARM: defconfig: u8500: Enable new drivers for ux500 The new device tree for samsung-skomer and the HREF520 devicetree enables some additional drivers that are not yet selected in the u8500_defconfig: - The GPIO-based I2C bus master driver for some peripherals that do not use the I2C hardware master. - The Novatek NT35510 driver for the Skomer panel. - The Sony ACX424AKP driver for the HREF520 panel. - The GPIO-based backlight driver for Skomer. - The BMA180 driver for the BMA254 accelerometer found in the Skomer. - The new GP2AP002 driver for the GP2AP002S00F proximimty sensor found in the Skomer and Golden devices. Cc: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-04-14 11:57:18 +03:00
CONFIG_BMA180=y
ARM: configs: ux500: Update for new drivers Some new driver support for the Ux500 devices landed in v5.12-rc1 so update the defconfig to use them: - TM2 touchkey, used on the Golden and Janice. - SPI GPIO, used for the Janice display control. - NTC thermistor, used for the HREF temperature sensors. - V4L2 flash control that gives support for LED torch to userspaces such as Phosh. - The LEDs Flash class and RT8515 Flash/torch LED driver used in all the Samsung mobiles. - FSA9480 extcon, used by Janice. - BMC150 accelerometer, used by Janice. - IIO rescaler, used for thermistors and ALS on Janice. - MPU3050 gyroscope driver used by Janice. - Yamaha YAS530 magnetometer driver used by Janice. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210301232050.1457397-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-03-02 02:20:50 +03:00
CONFIG_BMC150_ACCEL=y
ARM: ux500: configure in sensors This enables the STMicroelectronics MEMS sensors for accelerometer, gyroscope, magnetometer and pressure that are mounted on the Ux500 models. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-10 18:31:53 +04:00
CONFIG_IIO_ST_ACCEL_3AXIS=y
ARM: configs: ux500: Update for new drivers Some new driver support for the Ux500 devices landed in v5.12-rc1 so update the defconfig to use them: - TM2 touchkey, used on the Golden and Janice. - SPI GPIO, used for the Janice display control. - NTC thermistor, used for the HREF temperature sensors. - V4L2 flash control that gives support for LED torch to userspaces such as Phosh. - The LEDs Flash class and RT8515 Flash/torch LED driver used in all the Samsung mobiles. - FSA9480 extcon, used by Janice. - BMC150 accelerometer, used by Janice. - IIO rescaler, used for thermistors and ALS on Janice. - MPU3050 gyroscope driver used by Janice. - Yamaha YAS530 magnetometer driver used by Janice. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210301232050.1457397-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-03-02 02:20:50 +03:00
CONFIG_IIO_RESCALE=y
CONFIG_MPU3050_I2C=y
ARM: ux500: configure in sensors This enables the STMicroelectronics MEMS sensors for accelerometer, gyroscope, magnetometer and pressure that are mounted on the Ux500 models. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-10 18:31:53 +04:00
CONFIG_IIO_ST_GYRO_3AXIS=y
ARM: defconfig: u8500: Enable new drivers for samsung-golden The new device tree for samsung-golden depends on some additional drivers that are not selected in the u8500 defconfig yet: - Bluetooth: hci_bcm - WiFi: brcmfmac - Touchscreen: atmel_mxt_ts - Vibrator: gpio-vibra - Sensors: inv_mpu6050 (IMU) Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20191219202052.19039-10-stephan@gerhold.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-19 23:20:52 +03:00
CONFIG_INV_MPU6050_I2C=y
ARM: u8500_defconfig: update sensor config The Ux500 is using buffered IIO as the sensors support IRQs. The BH1780 ambient light sensor was added to IIO, so disable the old misc driver and activate the driver in IIO. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-02 11:38:04 +03:00
CONFIG_BH1780=y
ARM: defconfig: u8500: Enable new drivers for ux500 The new device tree for samsung-skomer and the HREF520 devicetree enables some additional drivers that are not yet selected in the u8500_defconfig: - The GPIO-based I2C bus master driver for some peripherals that do not use the I2C hardware master. - The Novatek NT35510 driver for the Skomer panel. - The Sony ACX424AKP driver for the HREF520 panel. - The GPIO-based backlight driver for Skomer. - The BMA180 driver for the BMA254 accelerometer found in the Skomer. - The new GP2AP002 driver for the GP2AP002S00F proximimty sensor found in the Skomer and Golden devices. Cc: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-04-14 11:57:18 +03:00
CONFIG_GP2AP002=y
ARM: defconfig: update U8500 defconfig Some config options like perf events and PM are now implicit, we have an upstream driver for the AK8974, and we really want the HRTIMER software triggers from configfs with some of the sensors. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-10-17 12:23:49 +03:00
CONFIG_AK8974=y
ARM: ux500: configure in sensors This enables the STMicroelectronics MEMS sensors for accelerometer, gyroscope, magnetometer and pressure that are mounted on the Ux500 models. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-10 18:31:53 +04:00
CONFIG_IIO_ST_MAGN_3AXIS=y
ARM: configs: ux500: Update for new drivers Some new driver support for the Ux500 devices landed in v5.12-rc1 so update the defconfig to use them: - TM2 touchkey, used on the Golden and Janice. - SPI GPIO, used for the Janice display control. - NTC thermistor, used for the HREF temperature sensors. - V4L2 flash control that gives support for LED torch to userspaces such as Phosh. - The LEDs Flash class and RT8515 Flash/torch LED driver used in all the Samsung mobiles. - FSA9480 extcon, used by Janice. - BMC150 accelerometer, used by Janice. - IIO rescaler, used for thermistors and ALS on Janice. - MPU3050 gyroscope driver used by Janice. - Yamaha YAS530 magnetometer driver used by Janice. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210301232050.1457397-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-03-02 02:20:50 +03:00
CONFIG_YAMAHA_YAS530=y
ARM: defconfig: update U8500 defconfig Some config options like perf events and PM are now implicit, we have an upstream driver for the AK8974, and we really want the HRTIMER software triggers from configfs with some of the sensors. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-10-17 12:23:49 +03:00
CONFIG_IIO_HRTIMER_TRIGGER=y
ARM: ux500: configure in sensors This enables the STMicroelectronics MEMS sensors for accelerometer, gyroscope, magnetometer and pressure that are mounted on the Ux500 models. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-10 18:31:53 +04:00
CONFIG_IIO_ST_PRESS=y
ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 07:43:53 +03:00
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 11:08:41 +03:00
CONFIG_EXT3_FS=y
CONFIG_VFAT_FS=y
ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 07:43:53 +03:00
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_MISC_FILESYSTEMS is not set
mach-ux500: add configs for snowball board Adds defconfig entries needed to boot a single ux500 kernel on the Snowball board. Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
2011-06-21 16:01:02 +04:00
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
ARM: 6644/1: mach-ux500: update the U8500 defconfig Config and activate all the devices we've merged for Ux500 in 2.6.38-rc1. This is needed for the default config to compile properly. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28 11:08:41 +03:00
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
ARM: defconfig: u8500: Refresh defconfig This refreshes the outdated U8500 defconfig: some options moved around, PS/2 mouse is no longer default on, crypto options moved around etc. Link: https://lore.kernel.org/r/20190723081523.13079-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-23 11:15:22 +03:00
CONFIG_CRYPTO_DEV_UX500=y
CONFIG_CRYPTO_DEV_UX500_CRYP=y
CONFIG_CRYPTO_DEV_UX500_HASH=y
CONFIG_CRYPTO_DEV_UX500_DEBUG=y
ARM: ux500: turn on PRINTK_TIME in u8500_defconfig I recently noticed slow booting of a board, and without printk timestamps it's harder to tell just where the delays are coming from. Enable it. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-17 00:26:25 +04:00
CONFIG_PRINTK_TIME=y
ARM: ux500: enable appended dtb in u8500_defconfig Churns the rest of the file a bit due to reordering of options, but the only changes are: CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-30 20:08:07 +04:00
CONFIG_DEBUG_INFO=y
CONFIG_MAGIC_SYSRQ=y
ARM: config: ux500: Update U8500 defconfig This updates the defconfig for the U8500 platform with some of the changes from the v5.9 and v5.10 kernel cycles: - No need to select the schedutil cpufreq governor because it is the default now. - Enable the CY8CTMA140 touchscreen as used on the Samsung Skomer GT-S7710. - Enable the Samsung S6E63M0 DSI panel as used on the Samsung Golden GT-I8810. - Enable the KTD253 backlight as used on the Samsung Skomer GT-S7710. - Drop CONFIG_USB as we only use the gadget mode of the MUSB driver. - Add selection of the CONFIG_LEDS_LP55XX_COMMON lest the LP5521 LEDs will not work. - Move the config entry for CONFIG_DEBUG_FS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20201105134510.1417639-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-05 16:45:10 +03:00
CONFIG_DEBUG_FS=y
ARM: 5835/1: ARM U8500: add defconfig Add defconfig file for mop500 board Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 07:43:53 +03:00
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
ARM: ux500: enable CoreSight in defconfig This enables the CoreSight blocks found on the Ux500 SoC into the Ux500 defconfig. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-05-13 13:51:50 +03:00
CONFIG_CORESIGHT=y
CONFIG_CORESIGHT_SINK_TPIU=y
CONFIG_CORESIGHT_SINK_ETBV10=y
CONFIG_CORESIGHT_SOURCE_ETM3X=y