WSL2-Linux-Kernel/net/mac80211/cfg.c

1377 строки
33 KiB
C
Исходник Обычный вид История

/*
* mac80211 configuration hooks for cfg80211
*
* Copyright 2006, 2007 Johannes Berg <johannes@sipsolutions.net>
*
* This file is GPLv2 as found in COPYING.
*/
#include <linux/ieee80211.h>
#include <linux/nl80211.h>
#include <linux/rtnetlink.h>
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 22:56:21 +04:00
#include <net/net_namespace.h>
#include <linux/rcupdate.h>
#include <net/cfg80211.h>
#include "ieee80211_i.h"
#include "driver-ops.h"
#include "cfg.h"
#include "rate.h"
#include "mesh.h"
static bool nl80211_type_check(enum nl80211_iftype type)
{
switch (type) {
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_MONITOR:
#ifdef CONFIG_MAC80211_MESH
case NL80211_IFTYPE_MESH_POINT:
#endif
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_WDS:
return true;
default:
return false;
}
}
static int ieee80211_add_iface(struct wiphy *wiphy, char *name,
enum nl80211_iftype type, u32 *flags,
struct vif_params *params)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct net_device *dev;
struct ieee80211_sub_if_data *sdata;
int err;
if (!nl80211_type_check(type))
return -EINVAL;
err = ieee80211_if_add(local, name, &dev, type, params);
if (err || type != NL80211_IFTYPE_MONITOR || !flags)
return err;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
sdata->u.mntr_flags = *flags;
return 0;
}
static int ieee80211_del_iface(struct wiphy *wiphy, int ifindex)
{
struct net_device *dev;
struct ieee80211_sub_if_data *sdata;
/* we're under RTNL */
dev = __dev_get_by_index(&init_net, ifindex);
if (!dev)
return -ENODEV;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
ieee80211_if_remove(sdata);
return 0;
}
static int ieee80211_change_iface(struct wiphy *wiphy, int ifindex,
enum nl80211_iftype type, u32 *flags,
struct vif_params *params)
{
struct net_device *dev;
struct ieee80211_sub_if_data *sdata;
int ret;
/* we're under RTNL */
dev = __dev_get_by_index(&init_net, ifindex);
if (!dev)
return -ENODEV;
if (!nl80211_type_check(type))
return -EINVAL;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
ret = ieee80211_if_change_type(sdata, type);
if (ret)
return ret;
if (netif_running(sdata->dev))
return -EBUSY;
if (ieee80211_vif_is_mesh(&sdata->vif) && params->mesh_id_len)
ieee80211_sdata_set_mesh_id(sdata,
params->mesh_id_len,
params->mesh_id);
if (sdata->vif.type != NL80211_IFTYPE_MONITOR || !flags)
return 0;
sdata->u.mntr_flags = *flags;
return 0;
}
static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
u8 key_idx, const u8 *mac_addr,
struct key_params *params)
{
struct ieee80211_sub_if_data *sdata;
struct sta_info *sta = NULL;
enum ieee80211_key_alg alg;
struct ieee80211_key *key;
int err;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
switch (params->cipher) {
case WLAN_CIPHER_SUITE_WEP40:
case WLAN_CIPHER_SUITE_WEP104:
alg = ALG_WEP;
break;
case WLAN_CIPHER_SUITE_TKIP:
alg = ALG_TKIP;
break;
case WLAN_CIPHER_SUITE_CCMP:
alg = ALG_CCMP;
break;
case WLAN_CIPHER_SUITE_AES_CMAC:
alg = ALG_AES_CMAC;
break;
default:
return -EINVAL;
}
key = ieee80211_key_alloc(alg, key_idx, params->key_len, params->key,
params->seq_len, params->seq);
if (!key)
return -ENOMEM;
rcu_read_lock();
if (mac_addr) {
sta = sta_info_get(sdata->local, mac_addr);
if (!sta) {
ieee80211_key_free(key);
err = -ENOENT;
goto out_unlock;
}
}
ieee80211_key_link(key, sdata, sta);
err = 0;
out_unlock:
rcu_read_unlock();
return err;
}
static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev,
u8 key_idx, const u8 *mac_addr)
{
struct ieee80211_sub_if_data *sdata;
struct sta_info *sta;
int ret;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
rcu_read_lock();
if (mac_addr) {
ret = -ENOENT;
sta = sta_info_get(sdata->local, mac_addr);
if (!sta)
goto out_unlock;
if (sta->key) {
ieee80211_key_free(sta->key);
WARN_ON(sta->key);
ret = 0;
}
goto out_unlock;
}
if (!sdata->keys[key_idx]) {
ret = -ENOENT;
goto out_unlock;
}
ieee80211_key_free(sdata->keys[key_idx]);
WARN_ON(sdata->keys[key_idx]);
ret = 0;
out_unlock:
rcu_read_unlock();
return ret;
}
static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev,
u8 key_idx, const u8 *mac_addr, void *cookie,
void (*callback)(void *cookie,
struct key_params *params))
{
struct ieee80211_sub_if_data *sdata;
struct sta_info *sta = NULL;
u8 seq[6] = {0};
struct key_params params;
struct ieee80211_key *key;
u32 iv32;
u16 iv16;
int err = -ENOENT;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
rcu_read_lock();
if (mac_addr) {
sta = sta_info_get(sdata->local, mac_addr);
if (!sta)
goto out;
key = sta->key;
} else
key = sdata->keys[key_idx];
if (!key)
goto out;
memset(&params, 0, sizeof(params));
switch (key->conf.alg) {
case ALG_TKIP:
params.cipher = WLAN_CIPHER_SUITE_TKIP;
iv32 = key->u.tkip.tx.iv32;
iv16 = key->u.tkip.tx.iv16;
if (key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)
drv_get_tkip_seq(sdata->local,
key->conf.hw_key_idx,
&iv32, &iv16);
seq[0] = iv16 & 0xff;
seq[1] = (iv16 >> 8) & 0xff;
seq[2] = iv32 & 0xff;
seq[3] = (iv32 >> 8) & 0xff;
seq[4] = (iv32 >> 16) & 0xff;
seq[5] = (iv32 >> 24) & 0xff;
params.seq = seq;
params.seq_len = 6;
break;
case ALG_CCMP:
params.cipher = WLAN_CIPHER_SUITE_CCMP;
seq[0] = key->u.ccmp.tx_pn[5];
seq[1] = key->u.ccmp.tx_pn[4];
seq[2] = key->u.ccmp.tx_pn[3];
seq[3] = key->u.ccmp.tx_pn[2];
seq[4] = key->u.ccmp.tx_pn[1];
seq[5] = key->u.ccmp.tx_pn[0];
params.seq = seq;
params.seq_len = 6;
break;
case ALG_WEP:
if (key->conf.keylen == 5)
params.cipher = WLAN_CIPHER_SUITE_WEP40;
else
params.cipher = WLAN_CIPHER_SUITE_WEP104;
break;
case ALG_AES_CMAC:
params.cipher = WLAN_CIPHER_SUITE_AES_CMAC;
seq[0] = key->u.aes_cmac.tx_pn[5];
seq[1] = key->u.aes_cmac.tx_pn[4];
seq[2] = key->u.aes_cmac.tx_pn[3];
seq[3] = key->u.aes_cmac.tx_pn[2];
seq[4] = key->u.aes_cmac.tx_pn[1];
seq[5] = key->u.aes_cmac.tx_pn[0];
params.seq = seq;
params.seq_len = 6;
break;
}
params.key = key->conf.key;
params.key_len = key->conf.keylen;
callback(cookie, &params);
err = 0;
out:
rcu_read_unlock();
return err;
}
static int ieee80211_config_default_key(struct wiphy *wiphy,
struct net_device *dev,
u8 key_idx)
{
struct ieee80211_sub_if_data *sdata;
rcu_read_lock();
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
ieee80211_set_default_key(sdata, key_idx);
rcu_read_unlock();
return 0;
}
static int ieee80211_config_default_mgmt_key(struct wiphy *wiphy,
struct net_device *dev,
u8 key_idx)
{
struct ieee80211_sub_if_data *sdata;
rcu_read_lock();
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
ieee80211_set_default_mgmt_key(sdata, key_idx);
rcu_read_unlock();
return 0;
}
static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
{
struct ieee80211_sub_if_data *sdata = sta->sdata;
sinfo->filled = STATION_INFO_INACTIVE_TIME |
STATION_INFO_RX_BYTES |
STATION_INFO_TX_BYTES |
STATION_INFO_RX_PACKETS |
STATION_INFO_TX_PACKETS |
STATION_INFO_TX_BITRATE;
sinfo->inactive_time = jiffies_to_msecs(jiffies - sta->last_rx);
sinfo->rx_bytes = sta->rx_bytes;
sinfo->tx_bytes = sta->tx_bytes;
sinfo->rx_packets = sta->rx_packets;
sinfo->tx_packets = sta->tx_packets;
if (sta->local->hw.flags & IEEE80211_HW_SIGNAL_DBM) {
sinfo->filled |= STATION_INFO_SIGNAL;
sinfo->signal = (s8)sta->last_signal;
}
sinfo->txrate.flags = 0;
if (sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS)
sinfo->txrate.flags |= RATE_INFO_FLAGS_MCS;
if (sta->last_tx_rate.flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
sinfo->txrate.flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH;
if (sta->last_tx_rate.flags & IEEE80211_TX_RC_SHORT_GI)
sinfo->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI;
if (!(sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS)) {
struct ieee80211_supported_band *sband;
sband = sta->local->hw.wiphy->bands[
sta->local->hw.conf.channel->band];
sinfo->txrate.legacy =
sband->bitrates[sta->last_tx_rate.idx].bitrate;
} else
sinfo->txrate.mcs = sta->last_tx_rate.idx;
if (ieee80211_vif_is_mesh(&sdata->vif)) {
#ifdef CONFIG_MAC80211_MESH
sinfo->filled |= STATION_INFO_LLID |
STATION_INFO_PLID |
STATION_INFO_PLINK_STATE;
sinfo->llid = le16_to_cpu(sta->llid);
sinfo->plid = le16_to_cpu(sta->plid);
sinfo->plink_state = sta->plink_state;
#endif
}
}
static int ieee80211_dump_station(struct wiphy *wiphy, struct net_device *dev,
int idx, u8 *mac, struct station_info *sinfo)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct sta_info *sta;
int ret = -ENOENT;
rcu_read_lock();
sta = sta_info_get_by_idx(local, idx, dev);
if (sta) {
ret = 0;
memcpy(mac, sta->sta.addr, ETH_ALEN);
sta_set_sinfo(sta, sinfo);
}
rcu_read_unlock();
return ret;
}
static int ieee80211_get_station(struct wiphy *wiphy, struct net_device *dev,
u8 *mac, struct station_info *sinfo)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct sta_info *sta;
int ret = -ENOENT;
rcu_read_lock();
/* XXX: verify sta->dev == dev */
sta = sta_info_get(local, mac);
if (sta) {
ret = 0;
sta_set_sinfo(sta, sinfo);
}
rcu_read_unlock();
return ret;
}
/*
* This handles both adding a beacon and setting new beacon info
*/
static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata,
struct beacon_parameters *params)
{
struct beacon_data *new, *old;
int new_head_len, new_tail_len;
int size;
int err = -EINVAL;
old = sdata->u.ap.beacon;
/* head must not be zero-length */
if (params->head && !params->head_len)
return -EINVAL;
/*
* This is a kludge. beacon interval should really be part
* of the beacon information.
*/
if (params->interval &&
(sdata->vif.bss_conf.beacon_int != params->interval)) {
sdata->vif.bss_conf.beacon_int = params->interval;
ieee80211_bss_info_change_notify(sdata,
BSS_CHANGED_BEACON_INT);
}
/* Need to have a beacon head if we don't have one yet */
if (!params->head && !old)
return err;
/* sorry, no way to start beaconing without dtim period */
if (!params->dtim_period && !old)
return err;
/* new or old head? */
if (params->head)
new_head_len = params->head_len;
else
new_head_len = old->head_len;
/* new or old tail? */
if (params->tail || !old)
/* params->tail_len will be zero for !params->tail */
new_tail_len = params->tail_len;
else
new_tail_len = old->tail_len;
size = sizeof(*new) + new_head_len + new_tail_len;
new = kzalloc(size, GFP_KERNEL);
if (!new)
return -ENOMEM;
/* start filling the new info now */
/* new or old dtim period? */
if (params->dtim_period)
new->dtim_period = params->dtim_period;
else
new->dtim_period = old->dtim_period;
/*
* pointers go into the block we allocated,
* memory is | beacon_data | head | tail |
*/
new->head = ((u8 *) new) + sizeof(*new);
new->tail = new->head + new_head_len;
new->head_len = new_head_len;
new->tail_len = new_tail_len;
/* copy in head */
if (params->head)
memcpy(new->head, params->head, new_head_len);
else
memcpy(new->head, old->head, new_head_len);
/* copy in optional tail */
if (params->tail)
memcpy(new->tail, params->tail, new_tail_len);
else
if (old)
memcpy(new->tail, old->tail, new_tail_len);
rcu_assign_pointer(sdata->u.ap.beacon, new);
synchronize_rcu();
kfree(old);
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED |
BSS_CHANGED_BEACON);
return 0;
}
static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev,
struct beacon_parameters *params)
{
struct ieee80211_sub_if_data *sdata;
struct beacon_data *old;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
old = sdata->u.ap.beacon;
if (old)
return -EALREADY;
return ieee80211_config_beacon(sdata, params);
}
static int ieee80211_set_beacon(struct wiphy *wiphy, struct net_device *dev,
struct beacon_parameters *params)
{
struct ieee80211_sub_if_data *sdata;
struct beacon_data *old;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
old = sdata->u.ap.beacon;
if (!old)
return -ENOENT;
return ieee80211_config_beacon(sdata, params);
}
static int ieee80211_del_beacon(struct wiphy *wiphy, struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata;
struct beacon_data *old;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
old = sdata->u.ap.beacon;
if (!old)
return -ENOENT;
rcu_assign_pointer(sdata->u.ap.beacon, NULL);
synchronize_rcu();
kfree(old);
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
return 0;
}
/* Layer 2 Update frame (802.2 Type 1 LLC XID Update response) */
struct iapp_layer2_update {
u8 da[ETH_ALEN]; /* broadcast */
u8 sa[ETH_ALEN]; /* STA addr */
__be16 len; /* 6 */
u8 dsap; /* 0 */
u8 ssap; /* 0 */
u8 control;
u8 xid_info[3];
} __attribute__ ((packed));
static void ieee80211_send_layer2_update(struct sta_info *sta)
{
struct iapp_layer2_update *msg;
struct sk_buff *skb;
/* Send Level 2 Update Frame to update forwarding tables in layer 2
* bridge devices */
skb = dev_alloc_skb(sizeof(*msg));
if (!skb)
return;
msg = (struct iapp_layer2_update *)skb_put(skb, sizeof(*msg));
/* 802.2 Type 1 Logical Link Control (LLC) Exchange Identifier (XID)
* Update response frame; IEEE Std 802.2-1998, 5.4.1.2.1 */
memset(msg->da, 0xff, ETH_ALEN);
memcpy(msg->sa, sta->sta.addr, ETH_ALEN);
msg->len = htons(6);
msg->dsap = 0;
msg->ssap = 0x01; /* NULL LSAP, CR Bit: Response */
msg->control = 0xaf; /* XID response lsb.1111F101.
* F=0 (no poll command; unsolicited frame) */
msg->xid_info[0] = 0x81; /* XID format identifier */
msg->xid_info[1] = 1; /* LLC types/classes: Type 1 LLC */
msg->xid_info[2] = 0; /* XID sender's receive window size (RW) */
skb->dev = sta->sdata->dev;
skb->protocol = eth_type_trans(skb, sta->sdata->dev);
memset(skb->cb, 0, sizeof(skb->cb));
netif_rx(skb);
}
static void sta_apply_parameters(struct ieee80211_local *local,
struct sta_info *sta,
struct station_parameters *params)
{
u32 rates;
int i, j;
struct ieee80211_supported_band *sband;
struct ieee80211_sub_if_data *sdata = sta->sdata;
u32 mask, set;
sband = local->hw.wiphy->bands[local->oper_channel->band];
spin_lock_bh(&sta->lock);
mask = params->sta_flags_mask;
set = params->sta_flags_set;
if (mask & BIT(NL80211_STA_FLAG_AUTHORIZED)) {
sta->flags &= ~WLAN_STA_AUTHORIZED;
if (set & BIT(NL80211_STA_FLAG_AUTHORIZED))
sta->flags |= WLAN_STA_AUTHORIZED;
}
if (mask & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE)) {
sta->flags &= ~WLAN_STA_SHORT_PREAMBLE;
if (set & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE))
sta->flags |= WLAN_STA_SHORT_PREAMBLE;
}
if (mask & BIT(NL80211_STA_FLAG_WME)) {
sta->flags &= ~WLAN_STA_WME;
if (set & BIT(NL80211_STA_FLAG_WME))
sta->flags |= WLAN_STA_WME;
}
if (mask & BIT(NL80211_STA_FLAG_MFP)) {
sta->flags &= ~WLAN_STA_MFP;
if (set & BIT(NL80211_STA_FLAG_MFP))
sta->flags |= WLAN_STA_MFP;
}
spin_unlock_bh(&sta->lock);
/*
* cfg80211 validates this (1-2007) and allows setting the AID
* only when creating a new station entry
*/
if (params->aid)
sta->sta.aid = params->aid;
/*
* FIXME: updating the following information is racy when this
* function is called from ieee80211_change_station().
* However, all this information should be static so
* maybe we should just reject attemps to change it.
*/
if (params->listen_interval >= 0)
sta->listen_interval = params->listen_interval;
if (params->supported_rates) {
rates = 0;
for (i = 0; i < params->supported_rates_len; i++) {
int rate = (params->supported_rates[i] & 0x7f) * 5;
for (j = 0; j < sband->n_bitrates; j++) {
if (sband->bitrates[j].bitrate == rate)
rates |= BIT(j);
}
}
sta->sta.supp_rates[local->oper_channel->band] = rates;
}
if (params->ht_capa)
ieee80211_ht_cap_ie_to_sta_ht_cap(sband,
params->ht_capa,
&sta->sta.ht_cap);
if (ieee80211_vif_is_mesh(&sdata->vif) && params->plink_action) {
switch (params->plink_action) {
case PLINK_ACTION_OPEN:
mesh_plink_open(sta);
break;
case PLINK_ACTION_BLOCK:
mesh_plink_block(sta);
break;
}
}
}
static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
u8 *mac, struct station_parameters *params)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct sta_info *sta;
struct ieee80211_sub_if_data *sdata;
int err;
int layer2_update;
if (params->vlan) {
sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
if (sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
sdata->vif.type != NL80211_IFTYPE_AP)
return -EINVAL;
} else
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (compare_ether_addr(mac, dev->dev_addr) == 0)
return -EINVAL;
if (is_multicast_ether_addr(mac))
return -EINVAL;
sta = sta_info_alloc(sdata, mac, GFP_KERNEL);
if (!sta)
return -ENOMEM;
sta->flags = WLAN_STA_AUTH | WLAN_STA_ASSOC;
sta_apply_parameters(local, sta, params);
rate_control_rate_init(sta);
layer2_update = sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
sdata->vif.type == NL80211_IFTYPE_AP;
rcu_read_lock();
err = sta_info_insert(sta);
if (err) {
/* STA has been freed */
if (err == -EEXIST && layer2_update) {
/* Need to update layer 2 devices on reassociation */
sta = sta_info_get(local, mac);
if (sta)
ieee80211_send_layer2_update(sta);
}
rcu_read_unlock();
return err;
}
if (layer2_update)
ieee80211_send_layer2_update(sta);
rcu_read_unlock();
return 0;
}
static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev,
u8 *mac)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata;
struct sta_info *sta;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (mac) {
rcu_read_lock();
/* XXX: get sta belonging to dev */
sta = sta_info_get(local, mac);
if (!sta) {
rcu_read_unlock();
return -ENOENT;
}
sta_info_unlink(&sta);
rcu_read_unlock();
sta_info_destroy(sta);
} else
sta_info_flush(local, sdata);
return 0;
}
static int ieee80211_change_station(struct wiphy *wiphy,
struct net_device *dev,
u8 *mac,
struct station_parameters *params)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct sta_info *sta;
struct ieee80211_sub_if_data *vlansdata;
rcu_read_lock();
/* XXX: get sta belonging to dev */
sta = sta_info_get(local, mac);
if (!sta) {
rcu_read_unlock();
return -ENOENT;
}
if (params->vlan && params->vlan != sta->sdata->dev) {
vlansdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
if (vlansdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
vlansdata->vif.type != NL80211_IFTYPE_AP) {
rcu_read_unlock();
return -EINVAL;
}
sta->sdata = vlansdata;
ieee80211_send_layer2_update(sta);
}
sta_apply_parameters(local, sta, params);
rcu_read_unlock();
return 0;
}
#ifdef CONFIG_MAC80211_MESH
static int ieee80211_add_mpath(struct wiphy *wiphy, struct net_device *dev,
u8 *dst, u8 *next_hop)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata;
struct mesh_path *mpath;
struct sta_info *sta;
int err;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
rcu_read_lock();
sta = sta_info_get(local, next_hop);
if (!sta) {
rcu_read_unlock();
return -ENOENT;
}
err = mesh_path_add(dst, sdata);
if (err) {
rcu_read_unlock();
return err;
}
mpath = mesh_path_lookup(dst, sdata);
if (!mpath) {
rcu_read_unlock();
return -ENXIO;
}
mesh_path_fix_nexthop(mpath, sta);
rcu_read_unlock();
return 0;
}
static int ieee80211_del_mpath(struct wiphy *wiphy, struct net_device *dev,
u8 *dst)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (dst)
return mesh_path_del(dst, sdata);
mesh_path_flush(sdata);
return 0;
}
static int ieee80211_change_mpath(struct wiphy *wiphy,
struct net_device *dev,
u8 *dst, u8 *next_hop)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata;
struct mesh_path *mpath;
struct sta_info *sta;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
rcu_read_lock();
sta = sta_info_get(local, next_hop);
if (!sta) {
rcu_read_unlock();
return -ENOENT;
}
mpath = mesh_path_lookup(dst, sdata);
if (!mpath) {
rcu_read_unlock();
return -ENOENT;
}
mesh_path_fix_nexthop(mpath, sta);
rcu_read_unlock();
return 0;
}
static void mpath_set_pinfo(struct mesh_path *mpath, u8 *next_hop,
struct mpath_info *pinfo)
{
if (mpath->next_hop)
memcpy(next_hop, mpath->next_hop->sta.addr, ETH_ALEN);
else
memset(next_hop, 0, ETH_ALEN);
pinfo->filled = MPATH_INFO_FRAME_QLEN |
MPATH_INFO_DSN |
MPATH_INFO_METRIC |
MPATH_INFO_EXPTIME |
MPATH_INFO_DISCOVERY_TIMEOUT |
MPATH_INFO_DISCOVERY_RETRIES |
MPATH_INFO_FLAGS;
pinfo->frame_qlen = mpath->frame_queue.qlen;
pinfo->dsn = mpath->dsn;
pinfo->metric = mpath->metric;
if (time_before(jiffies, mpath->exp_time))
pinfo->exptime = jiffies_to_msecs(mpath->exp_time - jiffies);
pinfo->discovery_timeout =
jiffies_to_msecs(mpath->discovery_timeout);
pinfo->discovery_retries = mpath->discovery_retries;
pinfo->flags = 0;
if (mpath->flags & MESH_PATH_ACTIVE)
pinfo->flags |= NL80211_MPATH_FLAG_ACTIVE;
if (mpath->flags & MESH_PATH_RESOLVING)
pinfo->flags |= NL80211_MPATH_FLAG_RESOLVING;
if (mpath->flags & MESH_PATH_DSN_VALID)
pinfo->flags |= NL80211_MPATH_FLAG_DSN_VALID;
if (mpath->flags & MESH_PATH_FIXED)
pinfo->flags |= NL80211_MPATH_FLAG_FIXED;
if (mpath->flags & MESH_PATH_RESOLVING)
pinfo->flags |= NL80211_MPATH_FLAG_RESOLVING;
pinfo->flags = mpath->flags;
}
static int ieee80211_get_mpath(struct wiphy *wiphy, struct net_device *dev,
u8 *dst, u8 *next_hop, struct mpath_info *pinfo)
{
struct ieee80211_sub_if_data *sdata;
struct mesh_path *mpath;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
rcu_read_lock();
mpath = mesh_path_lookup(dst, sdata);
if (!mpath) {
rcu_read_unlock();
return -ENOENT;
}
memcpy(dst, mpath->dst, ETH_ALEN);
mpath_set_pinfo(mpath, next_hop, pinfo);
rcu_read_unlock();
return 0;
}
static int ieee80211_dump_mpath(struct wiphy *wiphy, struct net_device *dev,
int idx, u8 *dst, u8 *next_hop,
struct mpath_info *pinfo)
{
struct ieee80211_sub_if_data *sdata;
struct mesh_path *mpath;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
rcu_read_lock();
mpath = mesh_path_lookup_by_idx(idx, sdata);
if (!mpath) {
rcu_read_unlock();
return -ENOENT;
}
memcpy(dst, mpath->dst, ETH_ALEN);
mpath_set_pinfo(mpath, next_hop, pinfo);
rcu_read_unlock();
return 0;
}
static int ieee80211_get_mesh_params(struct wiphy *wiphy,
struct net_device *dev,
struct mesh_config *conf)
{
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
memcpy(conf, &(sdata->u.mesh.mshcfg), sizeof(struct mesh_config));
return 0;
}
static inline bool _chg_mesh_attr(enum nl80211_meshconf_params parm, u32 mask)
{
return (mask >> (parm-1)) & 0x1;
}
static int ieee80211_set_mesh_params(struct wiphy *wiphy,
struct net_device *dev,
const struct mesh_config *nconf, u32 mask)
{
struct mesh_config *conf;
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
/* Set the config options which we are interested in setting */
conf = &(sdata->u.mesh.mshcfg);
if (_chg_mesh_attr(NL80211_MESHCONF_RETRY_TIMEOUT, mask))
conf->dot11MeshRetryTimeout = nconf->dot11MeshRetryTimeout;
if (_chg_mesh_attr(NL80211_MESHCONF_CONFIRM_TIMEOUT, mask))
conf->dot11MeshConfirmTimeout = nconf->dot11MeshConfirmTimeout;
if (_chg_mesh_attr(NL80211_MESHCONF_HOLDING_TIMEOUT, mask))
conf->dot11MeshHoldingTimeout = nconf->dot11MeshHoldingTimeout;
if (_chg_mesh_attr(NL80211_MESHCONF_MAX_PEER_LINKS, mask))
conf->dot11MeshMaxPeerLinks = nconf->dot11MeshMaxPeerLinks;
if (_chg_mesh_attr(NL80211_MESHCONF_MAX_RETRIES, mask))
conf->dot11MeshMaxRetries = nconf->dot11MeshMaxRetries;
if (_chg_mesh_attr(NL80211_MESHCONF_TTL, mask))
conf->dot11MeshTTL = nconf->dot11MeshTTL;
if (_chg_mesh_attr(NL80211_MESHCONF_AUTO_OPEN_PLINKS, mask))
conf->auto_open_plinks = nconf->auto_open_plinks;
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, mask))
conf->dot11MeshHWMPmaxPREQretries =
nconf->dot11MeshHWMPmaxPREQretries;
if (_chg_mesh_attr(NL80211_MESHCONF_PATH_REFRESH_TIME, mask))
conf->path_refresh_time = nconf->path_refresh_time;
if (_chg_mesh_attr(NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, mask))
conf->min_discovery_timeout = nconf->min_discovery_timeout;
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, mask))
conf->dot11MeshHWMPactivePathTimeout =
nconf->dot11MeshHWMPactivePathTimeout;
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, mask))
conf->dot11MeshHWMPpreqMinInterval =
nconf->dot11MeshHWMPpreqMinInterval;
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
mask))
conf->dot11MeshHWMPnetDiameterTraversalTime =
nconf->dot11MeshHWMPnetDiameterTraversalTime;
return 0;
}
#endif
static int ieee80211_change_bss(struct wiphy *wiphy,
struct net_device *dev,
struct bss_parameters *params)
{
struct ieee80211_sub_if_data *sdata;
u32 changed = 0;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (params->use_cts_prot >= 0) {
sdata->vif.bss_conf.use_cts_prot = params->use_cts_prot;
changed |= BSS_CHANGED_ERP_CTS_PROT;
}
if (params->use_short_preamble >= 0) {
sdata->vif.bss_conf.use_short_preamble =
params->use_short_preamble;
changed |= BSS_CHANGED_ERP_PREAMBLE;
}
if (params->use_short_slot_time >= 0) {
sdata->vif.bss_conf.use_short_slot =
params->use_short_slot_time;
changed |= BSS_CHANGED_ERP_SLOT;
}
if (params->basic_rates) {
int i, j;
u32 rates = 0;
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_supported_band *sband =
wiphy->bands[local->oper_channel->band];
for (i = 0; i < params->basic_rates_len; i++) {
int rate = (params->basic_rates[i] & 0x7f) * 5;
for (j = 0; j < sband->n_bitrates; j++) {
if (sband->bitrates[j].bitrate == rate)
rates |= BIT(j);
}
}
sdata->vif.bss_conf.basic_rates = rates;
changed |= BSS_CHANGED_BASIC_RATES;
}
ieee80211_bss_info_change_notify(sdata, changed);
return 0;
}
static int ieee80211_set_txq_params(struct wiphy *wiphy,
struct ieee80211_txq_params *params)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_tx_queue_params p;
if (!local->ops->conf_tx)
return -EOPNOTSUPP;
memset(&p, 0, sizeof(p));
p.aifs = params->aifs;
p.cw_max = params->cwmax;
p.cw_min = params->cwmin;
p.txop = params->txop;
if (drv_conf_tx(local, params->queue, &p)) {
printk(KERN_DEBUG "%s: failed to set TX queue "
"parameters for queue %d\n", local->mdev->name,
params->queue);
return -EINVAL;
}
return 0;
}
static int ieee80211_set_channel(struct wiphy *wiphy,
struct ieee80211_channel *chan,
enum nl80211_channel_type channel_type)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
local->oper_channel = chan;
local->oper_channel_type = channel_type;
return ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
}
#ifdef CONFIG_PM
static int ieee80211_suspend(struct wiphy *wiphy)
{
return __ieee80211_suspend(wiphy_priv(wiphy));
}
static int ieee80211_resume(struct wiphy *wiphy)
{
return __ieee80211_resume(wiphy_priv(wiphy));
}
#else
#define ieee80211_suspend NULL
#define ieee80211_resume NULL
#endif
static int ieee80211_scan(struct wiphy *wiphy,
struct net_device *dev,
struct cfg80211_scan_request *req)
{
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type != NL80211_IFTYPE_STATION &&
sdata->vif.type != NL80211_IFTYPE_ADHOC &&
sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
(sdata->vif.type != NL80211_IFTYPE_AP || sdata->u.ap.beacon))
return -EOPNOTSUPP;
return ieee80211_request_scan(sdata, req);
}
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 14:39:22 +03:00
static int ieee80211_auth(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_auth_request *req)
{
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
switch (req->auth_type) {
case NL80211_AUTHTYPE_OPEN_SYSTEM:
sdata->u.mgd.auth_algs = IEEE80211_AUTH_ALG_OPEN;
break;
case NL80211_AUTHTYPE_SHARED_KEY:
sdata->u.mgd.auth_algs = IEEE80211_AUTH_ALG_SHARED_KEY;
break;
case NL80211_AUTHTYPE_FT:
sdata->u.mgd.auth_algs = IEEE80211_AUTH_ALG_FT;
break;
case NL80211_AUTHTYPE_NETWORK_EAP:
sdata->u.mgd.auth_algs = IEEE80211_AUTH_ALG_LEAP;
break;
default:
return -EOPNOTSUPP;
}
memcpy(sdata->u.mgd.bssid, req->peer_addr, ETH_ALEN);
sdata->u.mgd.flags &= ~IEEE80211_STA_AUTO_BSSID_SEL;
sdata->u.mgd.flags |= IEEE80211_STA_BSSID_SET;
/* TODO: req->chan */
sdata->u.mgd.flags |= IEEE80211_STA_AUTO_CHANNEL_SEL;
if (req->ssid) {
sdata->u.mgd.flags |= IEEE80211_STA_SSID_SET;
memcpy(sdata->u.mgd.ssid, req->ssid, req->ssid_len);
sdata->u.mgd.ssid_len = req->ssid_len;
sdata->u.mgd.flags &= ~IEEE80211_STA_AUTO_SSID_SEL;
}
kfree(sdata->u.mgd.sme_auth_ie);
sdata->u.mgd.sme_auth_ie = NULL;
sdata->u.mgd.sme_auth_ie_len = 0;
if (req->ie) {
sdata->u.mgd.sme_auth_ie = kmalloc(req->ie_len, GFP_KERNEL);
if (sdata->u.mgd.sme_auth_ie == NULL)
return -ENOMEM;
memcpy(sdata->u.mgd.sme_auth_ie, req->ie, req->ie_len);
sdata->u.mgd.sme_auth_ie_len = req->ie_len;
}
sdata->u.mgd.flags |= IEEE80211_STA_EXT_SME;
sdata->u.mgd.state = IEEE80211_STA_MLME_DIRECT_PROBE;
ieee80211_sta_req_auth(sdata);
return 0;
}
static int ieee80211_assoc(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_assoc_request *req)
{
struct ieee80211_sub_if_data *sdata;
int ret;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (memcmp(sdata->u.mgd.bssid, req->peer_addr, ETH_ALEN) != 0 ||
!(sdata->u.mgd.flags & IEEE80211_STA_AUTHENTICATED))
return -ENOLINK; /* not authenticated */
sdata->u.mgd.flags &= ~IEEE80211_STA_AUTO_BSSID_SEL;
sdata->u.mgd.flags |= IEEE80211_STA_BSSID_SET;
/* TODO: req->chan */
sdata->u.mgd.flags |= IEEE80211_STA_AUTO_CHANNEL_SEL;
if (req->ssid) {
sdata->u.mgd.flags |= IEEE80211_STA_SSID_SET;
memcpy(sdata->u.mgd.ssid, req->ssid, req->ssid_len);
sdata->u.mgd.ssid_len = req->ssid_len;
sdata->u.mgd.flags &= ~IEEE80211_STA_AUTO_SSID_SEL;
} else
sdata->u.mgd.flags |= IEEE80211_STA_AUTO_SSID_SEL;
ret = ieee80211_sta_set_extra_ie(sdata, req->ie, req->ie_len);
if (ret)
return ret;
if (req->use_mfp) {
sdata->u.mgd.mfp = IEEE80211_MFP_REQUIRED;
sdata->u.mgd.flags |= IEEE80211_STA_MFP_ENABLED;
} else {
sdata->u.mgd.mfp = IEEE80211_MFP_DISABLED;
sdata->u.mgd.flags &= ~IEEE80211_STA_MFP_ENABLED;
}
if (req->control_port)
sdata->u.mgd.flags |= IEEE80211_STA_CONTROL_PORT;
else
sdata->u.mgd.flags &= ~IEEE80211_STA_CONTROL_PORT;
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 14:39:22 +03:00
sdata->u.mgd.flags |= IEEE80211_STA_EXT_SME;
sdata->u.mgd.state = IEEE80211_STA_MLME_ASSOCIATE;
ieee80211_sta_req_auth(sdata);
return 0;
}
static int ieee80211_deauth(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_deauth_request *req)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 14:39:22 +03:00
/* TODO: req->ie, req->peer_addr */
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 14:39:22 +03:00
return ieee80211_sta_deauthenticate(sdata, req->reason_code);
}
static int ieee80211_disassoc(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_disassoc_request *req)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 14:39:22 +03:00
/* TODO: req->ie, req->peer_addr */
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 14:39:22 +03:00
return ieee80211_sta_disassociate(sdata, req->reason_code);
}
static int ieee80211_join_ibss(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_ibss_params *params)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
return ieee80211_ibss_join(sdata, params);
}
static int ieee80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
return ieee80211_ibss_leave(sdata);
}
static int ieee80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
int err;
if (changed & WIPHY_PARAM_RTS_THRESHOLD) {
err = drv_set_rts_threshold(local, wiphy->rts_threshold);
if (err)
return err;
}
if (changed & WIPHY_PARAM_RETRY_SHORT)
local->hw.conf.short_frame_max_tx_count = wiphy->retry_short;
if (changed & WIPHY_PARAM_RETRY_LONG)
local->hw.conf.long_frame_max_tx_count = wiphy->retry_long;
if (changed &
(WIPHY_PARAM_RETRY_SHORT | WIPHY_PARAM_RETRY_LONG))
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_RETRY_LIMITS);
return 0;
}
struct cfg80211_ops mac80211_config_ops = {
.add_virtual_intf = ieee80211_add_iface,
.del_virtual_intf = ieee80211_del_iface,
.change_virtual_intf = ieee80211_change_iface,
.add_key = ieee80211_add_key,
.del_key = ieee80211_del_key,
.get_key = ieee80211_get_key,
.set_default_key = ieee80211_config_default_key,
.set_default_mgmt_key = ieee80211_config_default_mgmt_key,
.add_beacon = ieee80211_add_beacon,
.set_beacon = ieee80211_set_beacon,
.del_beacon = ieee80211_del_beacon,
.add_station = ieee80211_add_station,
.del_station = ieee80211_del_station,
.change_station = ieee80211_change_station,
.get_station = ieee80211_get_station,
.dump_station = ieee80211_dump_station,
#ifdef CONFIG_MAC80211_MESH
.add_mpath = ieee80211_add_mpath,
.del_mpath = ieee80211_del_mpath,
.change_mpath = ieee80211_change_mpath,
.get_mpath = ieee80211_get_mpath,
.dump_mpath = ieee80211_dump_mpath,
.set_mesh_params = ieee80211_set_mesh_params,
.get_mesh_params = ieee80211_get_mesh_params,
#endif
.change_bss = ieee80211_change_bss,
.set_txq_params = ieee80211_set_txq_params,
.set_channel = ieee80211_set_channel,
.suspend = ieee80211_suspend,
.resume = ieee80211_resume,
.scan = ieee80211_scan,
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 14:39:22 +03:00
.auth = ieee80211_auth,
.assoc = ieee80211_assoc,
.deauth = ieee80211_deauth,
.disassoc = ieee80211_disassoc,
.join_ibss = ieee80211_join_ibss,
.leave_ibss = ieee80211_leave_ibss,
.set_wiphy_params = ieee80211_set_wiphy_params,
};