WSL2-Linux-Kernel/arch/powerpc/mm/init_64.c

467 строки
13 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* PowerPC version
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
*
* Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
* and Cort Dougan (PReP) (cort@cs.nmt.edu)
* Copyright (C) 1996 Paul Mackerras
*
* Derived from "arch/i386/mm/init.c"
* Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
*
* Dave Engebretsen <engebret@us.ibm.com>
* Rework for PPC64 port.
*/
#undef DEBUG
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/stddef.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/highmem.h>
#include <linux/idr.h>
#include <linux/nodemask.h>
#include <linux/module.h>
#include <linux/poison.h>
#include <linux/memblock.h>
powerpc/mm: Allow more flexible layouts for hugepage pagetables Currently each available hugepage size uses a slightly different pagetable layout: that is, the bottem level table of pointers to hugepages is a different size, and may branch off from the normal page tables at a different level. Every hugepage aware path that needs to walk the pagetables must therefore look up the hugepage size from the slice info first, and work out the correct way to walk the pagetables accordingly. Future hardware is likely to add more possible hugepage sizes, more layout options and more mess. This patch, therefore reworks the handling of hugepage pagetables to reduce this complexity. In the new scheme, instead of having to consult the slice mask, pagetable walking code can check a flag in the PGD/PUD/PMD entries to see where to branch off to hugepage pagetables, and the entry also contains the information (eseentially hugepage shift) necessary to then interpret that table without recourse to the slice mask. This scheme can be extended neatly to handle multiple levels of self-describing "special" hugepage pagetables, although for now we assume only one level exists. This approach means that only the pagetable allocation path needs to know how the pagetables should be set out. All other (hugepage) pagetable walking paths can just interpret the structure as they go. There already was a flag bit in PGD/PUD/PMD entries for hugepage directory pointers, but it was only used for debug. We alter that flag bit to instead be a 0 in the MSB to indicate a hugepage pagetable pointer (normally it would be 1 since the pointer lies in the linear mapping). This means that asm pagetable walking can test for (and punt on) hugepage pointers with the same test that checks for unpopulated page directory entries (beq becomes bge), since hugepage pointers will always be positive, and normal pointers always negative. While we're at it, we get rid of the confusing (and grep defeating) #defining of hugepte_shift to be the same thing as mmu_huge_psizes. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-26 22:24:31 +03:00
#include <linux/hugetlb.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 11:04:11 +03:00
#include <linux/slab.h>
powerpc/64: Don't try to use radix MMU under a hypervisor Currently, if the kernel is running on a POWER9 processor under a hypervisor, it will try to use the radix MMU even though it doesn't have the necessary code to use radix under a hypervisor (it doesn't negotiate use of radix, and it doesn't do the H_REGISTER_PROC_TBL hcall). The result is that the guest kernel will crash when it tries to turn on the MMU. This fixes it by looking for the /chosen/ibm,architecture-vec-5 property, and if it exists, clears the radix MMU feature bit, before we decide whether to initialize for radix or HPT. This property is created by the hypervisor as a result of the guest calling the ibm,client-architecture-support method to indicate its capabilities, so it will indicate whether the hypervisor agreed to us using radix. Systems without a hypervisor may have this property also (for example, skiboot creates it), so we check the HV bit in the MSR to see whether we are running as a guest or not. If we are in hypervisor mode, then we can do whatever we like including using the radix MMU. The reason for using this property is that in future, when we have support for using radix under a hypervisor, we will need to check this property to see whether the hypervisor agreed to us using radix. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-30 13:21:34 +03:00
#include <linux/of_fdt.h>
#include <linux/libfdt.h>
#include <linux/memremap.h>
#include <asm/pgalloc.h>
#include <asm/page.h>
#include <asm/prom.h>
#include <asm/rtas.h>
#include <asm/io.h>
#include <asm/mmu_context.h>
#include <asm/mmu.h>
#include <linux/uaccess.h>
#include <asm/smp.h>
#include <asm/machdep.h>
#include <asm/tlb.h>
#include <asm/eeh.h>
#include <asm/processor.h>
#include <asm/mmzone.h>
#include <asm/cputable.h>
#include <asm/sections.h>
#include <asm/iommu.h>
#include <asm/vdso.h>
#include <mm/mmu_decl.h>
#ifdef CONFIG_SPARSEMEM_VMEMMAP
/*
* Given an address within the vmemmap, determine the page that
* represents the start of the subsection it is within. Note that we have to
* do this by hand as the proffered address may not be correctly aligned.
* Subtraction of non-aligned pointers produces undefined results.
*/
static struct page * __meminit vmemmap_subsection_start(unsigned long vmemmap_addr)
{
unsigned long start_pfn;
unsigned long offset = vmemmap_addr - ((unsigned long)(vmemmap));
/* Return the pfn of the start of the section. */
start_pfn = (offset / sizeof(struct page)) & PAGE_SUBSECTION_MASK;
return pfn_to_page(start_pfn);
}
/*
* Since memory is added in sub-section chunks, before creating a new vmemmap
* mapping, the kernel should check whether there is an existing memmap mapping
* covering the new subsection added. This is needed because kernel can map
* vmemmap area using 16MB pages which will cover a memory range of 16G. Such
* a range covers multiple subsections (2M)
*
* If any subsection in the 16G range mapped by vmemmap is valid we consider the
* vmemmap populated (There is a page table entry already present). We can't do
* a page table lookup here because with the hash translation we don't keep
* vmemmap details in linux page table.
*/
static int __meminit vmemmap_populated(unsigned long vmemmap_addr, int vmemmap_map_size)
{
struct page *start;
unsigned long vmemmap_end = vmemmap_addr + vmemmap_map_size;
start = vmemmap_subsection_start(vmemmap_addr);
for (; (unsigned long)start < vmemmap_end; start += PAGES_PER_SUBSECTION)
/*
* pfn valid check here is intended to really check
* whether we have any subsection already initialized
* in this range.
*/
if (pfn_valid(page_to_pfn(start)))
return 1;
return 0;
}
/*
* vmemmap virtual address space management does not have a traditonal page
* table to track which virtual struct pages are backed by physical mapping.
* The virtual to physical mappings are tracked in a simple linked list
* format. 'vmemmap_list' maintains the entire vmemmap physical mapping at
* all times where as the 'next' list maintains the available
* vmemmap_backing structures which have been deleted from the
* 'vmemmap_global' list during system runtime (memory hotplug remove
* operation). The freed 'vmemmap_backing' structures are reused later when
* new requests come in without allocating fresh memory. This pointer also
* tracks the allocated 'vmemmap_backing' structures as we allocate one
* full page memory at a time when we dont have any.
*/
struct vmemmap_backing *vmemmap_list;
static struct vmemmap_backing *next;
/*
* The same pointer 'next' tracks individual chunks inside the allocated
* full page during the boot time and again tracks the freeed nodes during
* runtime. It is racy but it does not happen as they are separated by the
* boot process. Will create problem if some how we have memory hotplug
* operation during boot !!
*/
static int num_left;
static int num_freed;
static __meminit struct vmemmap_backing * vmemmap_list_alloc(int node)
{
struct vmemmap_backing *vmem_back;
/* get from freed entries first */
if (num_freed) {
num_freed--;
vmem_back = next;
next = next->list;
return vmem_back;
}
/* allocate a page when required and hand out chunks */
if (!num_left) {
next = vmemmap_alloc_block(PAGE_SIZE, node);
if (unlikely(!next)) {
WARN_ON(1);
return NULL;
}
num_left = PAGE_SIZE / sizeof(struct vmemmap_backing);
}
num_left--;
return next++;
}
static __meminit int vmemmap_list_populate(unsigned long phys,
unsigned long start,
int node)
{
struct vmemmap_backing *vmem_back;
vmem_back = vmemmap_list_alloc(node);
if (unlikely(!vmem_back)) {
pr_debug("vmemap list allocation failed\n");
return -ENOMEM;
}
vmem_back->phys = phys;
vmem_back->virt_addr = start;
vmem_back->list = vmemmap_list;
vmemmap_list = vmem_back;
return 0;
}
libnvdimm/altmap: Track namespace boundaries in altmap With PFN_MODE_PMEM namespace, the memmap area is allocated from the device area. Some architectures map the memmap area with large page size. On architectures like ppc64, 16MB page for memap mapping can map 262144 pfns. This maps a namespace size of 16G. When populating memmap region with 16MB page from the device area, make sure the allocated space is not used to map resources outside this namespace. Such usage of device area will prevent a namespace destroy. Add resource end pnf in altmap and use that to check if the memmap area allocation can map pfn outside the namespace. On ppc64 in such case we fallback to allocation from memory. This fix kernel crash reported below: [ 132.034989] WARNING: CPU: 13 PID: 13719 at mm/memremap.c:133 devm_memremap_pages_release+0x2d8/0x2e0 [ 133.464754] BUG: Unable to handle kernel data access at 0xc00c00010b204000 [ 133.464760] Faulting instruction address: 0xc00000000007580c [ 133.464766] Oops: Kernel access of bad area, sig: 11 [#1] [ 133.464771] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries ..... [ 133.464901] NIP [c00000000007580c] vmemmap_free+0x2ac/0x3d0 [ 133.464906] LR [c0000000000757f8] vmemmap_free+0x298/0x3d0 [ 133.464910] Call Trace: [ 133.464914] [c000007cbfd0f7b0] [c0000000000757f8] vmemmap_free+0x298/0x3d0 (unreliable) [ 133.464921] [c000007cbfd0f8d0] [c000000000370a44] section_deactivate+0x1a4/0x240 [ 133.464928] [c000007cbfd0f980] [c000000000386270] __remove_pages+0x3a0/0x590 [ 133.464935] [c000007cbfd0fa50] [c000000000074158] arch_remove_memory+0x88/0x160 [ 133.464942] [c000007cbfd0fae0] [c0000000003be8c0] devm_memremap_pages_release+0x150/0x2e0 [ 133.464949] [c000007cbfd0fb70] [c000000000738ea0] devm_action_release+0x30/0x50 [ 133.464955] [c000007cbfd0fb90] [c00000000073a5a4] release_nodes+0x344/0x400 [ 133.464961] [c000007cbfd0fc40] [c00000000073378c] device_release_driver_internal+0x15c/0x250 [ 133.464968] [c000007cbfd0fc80] [c00000000072fd14] unbind_store+0x104/0x110 [ 133.464973] [c000007cbfd0fcd0] [c00000000072ee24] drv_attr_store+0x44/0x70 [ 133.464981] [c000007cbfd0fcf0] [c0000000004a32bc] sysfs_kf_write+0x6c/0xa0 [ 133.464987] [c000007cbfd0fd10] [c0000000004a1dfc] kernfs_fop_write+0x17c/0x250 [ 133.464993] [c000007cbfd0fd60] [c0000000003c348c] __vfs_write+0x3c/0x70 [ 133.464999] [c000007cbfd0fd80] [c0000000003c75d0] vfs_write+0xd0/0x250 djbw: Aneesh notes that this crash can likely be triggered in any kernel that supports 'papr_scm', so flagging that commit for -stable consideration. Fixes: b5beae5e224f ("powerpc/pseries: Add driver for PAPR SCM regions") Cc: <stable@vger.kernel.org> Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Santosh Sivaraj <santosh@fossix.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Link: https://lore.kernel.org/r/20190910062826.10041-1-aneesh.kumar@linux.ibm.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-09-10 09:28:25 +03:00
static bool altmap_cross_boundary(struct vmem_altmap *altmap, unsigned long start,
unsigned long page_size)
{
unsigned long nr_pfn = page_size / sizeof(struct page);
unsigned long start_pfn = page_to_pfn((struct page *)start);
if ((start_pfn + nr_pfn - 1) > altmap->end_pfn)
libnvdimm/altmap: Track namespace boundaries in altmap With PFN_MODE_PMEM namespace, the memmap area is allocated from the device area. Some architectures map the memmap area with large page size. On architectures like ppc64, 16MB page for memap mapping can map 262144 pfns. This maps a namespace size of 16G. When populating memmap region with 16MB page from the device area, make sure the allocated space is not used to map resources outside this namespace. Such usage of device area will prevent a namespace destroy. Add resource end pnf in altmap and use that to check if the memmap area allocation can map pfn outside the namespace. On ppc64 in such case we fallback to allocation from memory. This fix kernel crash reported below: [ 132.034989] WARNING: CPU: 13 PID: 13719 at mm/memremap.c:133 devm_memremap_pages_release+0x2d8/0x2e0 [ 133.464754] BUG: Unable to handle kernel data access at 0xc00c00010b204000 [ 133.464760] Faulting instruction address: 0xc00000000007580c [ 133.464766] Oops: Kernel access of bad area, sig: 11 [#1] [ 133.464771] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries ..... [ 133.464901] NIP [c00000000007580c] vmemmap_free+0x2ac/0x3d0 [ 133.464906] LR [c0000000000757f8] vmemmap_free+0x298/0x3d0 [ 133.464910] Call Trace: [ 133.464914] [c000007cbfd0f7b0] [c0000000000757f8] vmemmap_free+0x298/0x3d0 (unreliable) [ 133.464921] [c000007cbfd0f8d0] [c000000000370a44] section_deactivate+0x1a4/0x240 [ 133.464928] [c000007cbfd0f980] [c000000000386270] __remove_pages+0x3a0/0x590 [ 133.464935] [c000007cbfd0fa50] [c000000000074158] arch_remove_memory+0x88/0x160 [ 133.464942] [c000007cbfd0fae0] [c0000000003be8c0] devm_memremap_pages_release+0x150/0x2e0 [ 133.464949] [c000007cbfd0fb70] [c000000000738ea0] devm_action_release+0x30/0x50 [ 133.464955] [c000007cbfd0fb90] [c00000000073a5a4] release_nodes+0x344/0x400 [ 133.464961] [c000007cbfd0fc40] [c00000000073378c] device_release_driver_internal+0x15c/0x250 [ 133.464968] [c000007cbfd0fc80] [c00000000072fd14] unbind_store+0x104/0x110 [ 133.464973] [c000007cbfd0fcd0] [c00000000072ee24] drv_attr_store+0x44/0x70 [ 133.464981] [c000007cbfd0fcf0] [c0000000004a32bc] sysfs_kf_write+0x6c/0xa0 [ 133.464987] [c000007cbfd0fd10] [c0000000004a1dfc] kernfs_fop_write+0x17c/0x250 [ 133.464993] [c000007cbfd0fd60] [c0000000003c348c] __vfs_write+0x3c/0x70 [ 133.464999] [c000007cbfd0fd80] [c0000000003c75d0] vfs_write+0xd0/0x250 djbw: Aneesh notes that this crash can likely be triggered in any kernel that supports 'papr_scm', so flagging that commit for -stable consideration. Fixes: b5beae5e224f ("powerpc/pseries: Add driver for PAPR SCM regions") Cc: <stable@vger.kernel.org> Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Santosh Sivaraj <santosh@fossix.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Link: https://lore.kernel.org/r/20190910062826.10041-1-aneesh.kumar@linux.ibm.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-09-10 09:28:25 +03:00
return true;
if (start_pfn < altmap->base_pfn)
return true;
return false;
}
int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node,
struct vmem_altmap *altmap)
{
bool altmap_alloc;
unsigned long page_size = 1 << mmu_psize_defs[mmu_vmemmap_psize].shift;
/* Align to the page size of the linear mapping. */
start = ALIGN_DOWN(start, page_size);
pr_debug("vmemmap_populate %lx..%lx, node %d\n", start, end, node);
for (; start < end; start += page_size) {
void *p = NULL;
int rc;
/*
* This vmemmap range is backing different subsections. If any
* of that subsection is marked valid, that means we already
* have initialized a page table covering this range and hence
* the vmemmap range is populated.
*/
if (vmemmap_populated(start, page_size))
continue;
/*
* Allocate from the altmap first if we have one. This may
* fail due to alignment issues when using 16MB hugepages, so
* fall back to system memory if the altmap allocation fail.
*/
libnvdimm/altmap: Track namespace boundaries in altmap With PFN_MODE_PMEM namespace, the memmap area is allocated from the device area. Some architectures map the memmap area with large page size. On architectures like ppc64, 16MB page for memap mapping can map 262144 pfns. This maps a namespace size of 16G. When populating memmap region with 16MB page from the device area, make sure the allocated space is not used to map resources outside this namespace. Such usage of device area will prevent a namespace destroy. Add resource end pnf in altmap and use that to check if the memmap area allocation can map pfn outside the namespace. On ppc64 in such case we fallback to allocation from memory. This fix kernel crash reported below: [ 132.034989] WARNING: CPU: 13 PID: 13719 at mm/memremap.c:133 devm_memremap_pages_release+0x2d8/0x2e0 [ 133.464754] BUG: Unable to handle kernel data access at 0xc00c00010b204000 [ 133.464760] Faulting instruction address: 0xc00000000007580c [ 133.464766] Oops: Kernel access of bad area, sig: 11 [#1] [ 133.464771] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries ..... [ 133.464901] NIP [c00000000007580c] vmemmap_free+0x2ac/0x3d0 [ 133.464906] LR [c0000000000757f8] vmemmap_free+0x298/0x3d0 [ 133.464910] Call Trace: [ 133.464914] [c000007cbfd0f7b0] [c0000000000757f8] vmemmap_free+0x298/0x3d0 (unreliable) [ 133.464921] [c000007cbfd0f8d0] [c000000000370a44] section_deactivate+0x1a4/0x240 [ 133.464928] [c000007cbfd0f980] [c000000000386270] __remove_pages+0x3a0/0x590 [ 133.464935] [c000007cbfd0fa50] [c000000000074158] arch_remove_memory+0x88/0x160 [ 133.464942] [c000007cbfd0fae0] [c0000000003be8c0] devm_memremap_pages_release+0x150/0x2e0 [ 133.464949] [c000007cbfd0fb70] [c000000000738ea0] devm_action_release+0x30/0x50 [ 133.464955] [c000007cbfd0fb90] [c00000000073a5a4] release_nodes+0x344/0x400 [ 133.464961] [c000007cbfd0fc40] [c00000000073378c] device_release_driver_internal+0x15c/0x250 [ 133.464968] [c000007cbfd0fc80] [c00000000072fd14] unbind_store+0x104/0x110 [ 133.464973] [c000007cbfd0fcd0] [c00000000072ee24] drv_attr_store+0x44/0x70 [ 133.464981] [c000007cbfd0fcf0] [c0000000004a32bc] sysfs_kf_write+0x6c/0xa0 [ 133.464987] [c000007cbfd0fd10] [c0000000004a1dfc] kernfs_fop_write+0x17c/0x250 [ 133.464993] [c000007cbfd0fd60] [c0000000003c348c] __vfs_write+0x3c/0x70 [ 133.464999] [c000007cbfd0fd80] [c0000000003c75d0] vfs_write+0xd0/0x250 djbw: Aneesh notes that this crash can likely be triggered in any kernel that supports 'papr_scm', so flagging that commit for -stable consideration. Fixes: b5beae5e224f ("powerpc/pseries: Add driver for PAPR SCM regions") Cc: <stable@vger.kernel.org> Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Santosh Sivaraj <santosh@fossix.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Link: https://lore.kernel.org/r/20190910062826.10041-1-aneesh.kumar@linux.ibm.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-09-10 09:28:25 +03:00
if (altmap && !altmap_cross_boundary(altmap, start, page_size)) {
mm/sparsemem: enable vmem_altmap support in vmemmap_alloc_block_buf() There are many instances where vmemap allocation is often switched between regular memory and device memory just based on whether altmap is available or not. vmemmap_alloc_block_buf() is used in various platforms to allocate vmemmap mappings. Lets also enable it to handle altmap based device memory allocation along with existing regular memory allocations. This will help in avoiding the altmap based allocation switch in many places. To summarize there are two different methods to call vmemmap_alloc_block_buf(). vmemmap_alloc_block_buf(size, node, NULL) /* Allocate from system RAM */ vmemmap_alloc_block_buf(size, node, altmap) /* Allocate from altmap */ This converts altmap_alloc_block_buf() into a static function, drops it's entry from the header and updates Documentation/vm/memory-model.rst. Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Jia He <justin.he@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Will Deacon <will@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Steve Capper <steve.capper@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Yu Zhao <yuzhao@google.com> Link: http://lkml.kernel.org/r/1594004178-8861-3-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 09:23:24 +03:00
p = vmemmap_alloc_block_buf(page_size, node, altmap);
if (!p)
pr_debug("altmap block allocation failed, falling back to system memory");
else
altmap_alloc = true;
}
if (!p) {
mm/sparsemem: enable vmem_altmap support in vmemmap_alloc_block_buf() There are many instances where vmemap allocation is often switched between regular memory and device memory just based on whether altmap is available or not. vmemmap_alloc_block_buf() is used in various platforms to allocate vmemmap mappings. Lets also enable it to handle altmap based device memory allocation along with existing regular memory allocations. This will help in avoiding the altmap based allocation switch in many places. To summarize there are two different methods to call vmemmap_alloc_block_buf(). vmemmap_alloc_block_buf(size, node, NULL) /* Allocate from system RAM */ vmemmap_alloc_block_buf(size, node, altmap) /* Allocate from altmap */ This converts altmap_alloc_block_buf() into a static function, drops it's entry from the header and updates Documentation/vm/memory-model.rst. Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Jia He <justin.he@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Will Deacon <will@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Steve Capper <steve.capper@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Yu Zhao <yuzhao@google.com> Link: http://lkml.kernel.org/r/1594004178-8861-3-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 09:23:24 +03:00
p = vmemmap_alloc_block_buf(page_size, node, NULL);
altmap_alloc = false;
}
if (!p)
return -ENOMEM;
if (vmemmap_list_populate(__pa(p), start, node)) {
/*
* If we don't populate vmemap list, we don't have
* the ability to free the allocated vmemmap
* pages in section_deactivate. Hence free them
* here.
*/
int nr_pfns = page_size >> PAGE_SHIFT;
unsigned long page_order = get_order(page_size);
if (altmap_alloc)
vmem_altmap_free(altmap, nr_pfns);
else
free_pages((unsigned long)p, page_order);
return -ENOMEM;
}
pr_debug(" * %016lx..%016lx allocated at %p\n",
start, start + page_size, p);
rc = vmemmap_create_mapping(start, page_size, __pa(p));
if (rc < 0) {
pr_warn("%s: Unable to create vmemmap mapping: %d\n",
__func__, rc);
return -EFAULT;
}
}
return 0;
}
#ifdef CONFIG_MEMORY_HOTPLUG
static unsigned long vmemmap_list_free(unsigned long start)
{
struct vmemmap_backing *vmem_back, *vmem_back_prev;
vmem_back_prev = vmem_back = vmemmap_list;
/* look for it with prev pointer recorded */
for (; vmem_back; vmem_back = vmem_back->list) {
if (vmem_back->virt_addr == start)
break;
vmem_back_prev = vmem_back;
}
if (unlikely(!vmem_back))
return 0;
/* remove it from vmemmap_list */
if (vmem_back == vmemmap_list) /* remove head */
vmemmap_list = vmem_back->list;
else
vmem_back_prev->list = vmem_back->list;
/* next point to this freed entry */
vmem_back->list = next;
next = vmem_back;
num_freed++;
return vmem_back->phys;
}
void __ref vmemmap_free(unsigned long start, unsigned long end,
struct vmem_altmap *altmap)
{
unsigned long page_size = 1 << mmu_psize_defs[mmu_vmemmap_psize].shift;
unsigned long page_order = get_order(page_size);
unsigned long alt_start = ~0, alt_end = ~0;
unsigned long base_pfn;
start = ALIGN_DOWN(start, page_size);
if (altmap) {
alt_start = altmap->base_pfn;
alt_end = altmap->base_pfn + altmap->reserve + altmap->free;
}
pr_debug("vmemmap_free %lx...%lx\n", start, end);
for (; start < end; start += page_size) {
unsigned long nr_pages, addr;
struct page *page;
/*
* We have already marked the subsection we are trying to remove
* invalid. So if we want to remove the vmemmap range, we
* need to make sure there is no subsection marked valid
* in this range.
*/
if (vmemmap_populated(start, page_size))
continue;
addr = vmemmap_list_free(start);
if (!addr)
continue;
page = pfn_to_page(addr >> PAGE_SHIFT);
nr_pages = 1 << page_order;
base_pfn = PHYS_PFN(addr);
if (base_pfn >= alt_start && base_pfn < alt_end) {
vmem_altmap_free(altmap, nr_pages);
} else if (PageReserved(page)) {
/* allocated from bootmem */
if (page_size < PAGE_SIZE) {
/*
* this shouldn't happen, but if it is
* the case, leave the memory there
*/
WARN_ON_ONCE(1);
} else {
while (nr_pages--)
free_reserved_page(page++);
}
} else {
free_pages((unsigned long)(__va(addr)), page_order);
}
vmemmap_remove_mapping(start, page_size);
}
}
#endif
void register_page_bootmem_memmap(unsigned long section_nr,
struct page *start_page, unsigned long size)
{
}
#endif /* CONFIG_SPARSEMEM_VMEMMAP */
#ifdef CONFIG_PPC_BOOK3S_64
static bool disable_radix = !IS_ENABLED(CONFIG_PPC_RADIX_MMU_DEFAULT);
static int __init parse_disable_radix(char *p)
{
bool val;
if (!p)
val = true;
else if (kstrtobool(p, &val))
return -EINVAL;
disable_radix = val;
return 0;
}
early_param("disable_radix", parse_disable_radix);
powerpc/64: Don't try to use radix MMU under a hypervisor Currently, if the kernel is running on a POWER9 processor under a hypervisor, it will try to use the radix MMU even though it doesn't have the necessary code to use radix under a hypervisor (it doesn't negotiate use of radix, and it doesn't do the H_REGISTER_PROC_TBL hcall). The result is that the guest kernel will crash when it tries to turn on the MMU. This fixes it by looking for the /chosen/ibm,architecture-vec-5 property, and if it exists, clears the radix MMU feature bit, before we decide whether to initialize for radix or HPT. This property is created by the hypervisor as a result of the guest calling the ibm,client-architecture-support method to indicate its capabilities, so it will indicate whether the hypervisor agreed to us using radix. Systems without a hypervisor may have this property also (for example, skiboot creates it), so we check the HV bit in the MSR to see whether we are running as a guest or not. If we are in hypervisor mode, then we can do whatever we like including using the radix MMU. The reason for using this property is that in future, when we have support for using radix under a hypervisor, we will need to check this property to see whether the hypervisor agreed to us using radix. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-30 13:21:34 +03:00
/*
* If we're running under a hypervisor, we need to check the contents of
* /chosen/ibm,architecture-vec-5 to see if the hypervisor is willing to do
* radix. If not, we clear the radix feature bit so we fall back to hash.
powerpc/64: Don't try to use radix MMU under a hypervisor Currently, if the kernel is running on a POWER9 processor under a hypervisor, it will try to use the radix MMU even though it doesn't have the necessary code to use radix under a hypervisor (it doesn't negotiate use of radix, and it doesn't do the H_REGISTER_PROC_TBL hcall). The result is that the guest kernel will crash when it tries to turn on the MMU. This fixes it by looking for the /chosen/ibm,architecture-vec-5 property, and if it exists, clears the radix MMU feature bit, before we decide whether to initialize for radix or HPT. This property is created by the hypervisor as a result of the guest calling the ibm,client-architecture-support method to indicate its capabilities, so it will indicate whether the hypervisor agreed to us using radix. Systems without a hypervisor may have this property also (for example, skiboot creates it), so we check the HV bit in the MSR to see whether we are running as a guest or not. If we are in hypervisor mode, then we can do whatever we like including using the radix MMU. The reason for using this property is that in future, when we have support for using radix under a hypervisor, we will need to check this property to see whether the hypervisor agreed to us using radix. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-30 13:21:34 +03:00
*/
static void __init early_check_vec5(void)
powerpc/64: Don't try to use radix MMU under a hypervisor Currently, if the kernel is running on a POWER9 processor under a hypervisor, it will try to use the radix MMU even though it doesn't have the necessary code to use radix under a hypervisor (it doesn't negotiate use of radix, and it doesn't do the H_REGISTER_PROC_TBL hcall). The result is that the guest kernel will crash when it tries to turn on the MMU. This fixes it by looking for the /chosen/ibm,architecture-vec-5 property, and if it exists, clears the radix MMU feature bit, before we decide whether to initialize for radix or HPT. This property is created by the hypervisor as a result of the guest calling the ibm,client-architecture-support method to indicate its capabilities, so it will indicate whether the hypervisor agreed to us using radix. Systems without a hypervisor may have this property also (for example, skiboot creates it), so we check the HV bit in the MSR to see whether we are running as a guest or not. If we are in hypervisor mode, then we can do whatever we like including using the radix MMU. The reason for using this property is that in future, when we have support for using radix under a hypervisor, we will need to check this property to see whether the hypervisor agreed to us using radix. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-30 13:21:34 +03:00
{
unsigned long root, chosen;
int size;
const u8 *vec5;
u8 mmu_supported;
powerpc/64: Don't try to use radix MMU under a hypervisor Currently, if the kernel is running on a POWER9 processor under a hypervisor, it will try to use the radix MMU even though it doesn't have the necessary code to use radix under a hypervisor (it doesn't negotiate use of radix, and it doesn't do the H_REGISTER_PROC_TBL hcall). The result is that the guest kernel will crash when it tries to turn on the MMU. This fixes it by looking for the /chosen/ibm,architecture-vec-5 property, and if it exists, clears the radix MMU feature bit, before we decide whether to initialize for radix or HPT. This property is created by the hypervisor as a result of the guest calling the ibm,client-architecture-support method to indicate its capabilities, so it will indicate whether the hypervisor agreed to us using radix. Systems without a hypervisor may have this property also (for example, skiboot creates it), so we check the HV bit in the MSR to see whether we are running as a guest or not. If we are in hypervisor mode, then we can do whatever we like including using the radix MMU. The reason for using this property is that in future, when we have support for using radix under a hypervisor, we will need to check this property to see whether the hypervisor agreed to us using radix. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-30 13:21:34 +03:00
root = of_get_flat_dt_root();
chosen = of_get_flat_dt_subnode_by_name(root, "chosen");
if (chosen == -FDT_ERR_NOTFOUND) {
cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX;
powerpc/64: Don't try to use radix MMU under a hypervisor Currently, if the kernel is running on a POWER9 processor under a hypervisor, it will try to use the radix MMU even though it doesn't have the necessary code to use radix under a hypervisor (it doesn't negotiate use of radix, and it doesn't do the H_REGISTER_PROC_TBL hcall). The result is that the guest kernel will crash when it tries to turn on the MMU. This fixes it by looking for the /chosen/ibm,architecture-vec-5 property, and if it exists, clears the radix MMU feature bit, before we decide whether to initialize for radix or HPT. This property is created by the hypervisor as a result of the guest calling the ibm,client-architecture-support method to indicate its capabilities, so it will indicate whether the hypervisor agreed to us using radix. Systems without a hypervisor may have this property also (for example, skiboot creates it), so we check the HV bit in the MSR to see whether we are running as a guest or not. If we are in hypervisor mode, then we can do whatever we like including using the radix MMU. The reason for using this property is that in future, when we have support for using radix under a hypervisor, we will need to check this property to see whether the hypervisor agreed to us using radix. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-30 13:21:34 +03:00
return;
}
powerpc/64: Don't try to use radix MMU under a hypervisor Currently, if the kernel is running on a POWER9 processor under a hypervisor, it will try to use the radix MMU even though it doesn't have the necessary code to use radix under a hypervisor (it doesn't negotiate use of radix, and it doesn't do the H_REGISTER_PROC_TBL hcall). The result is that the guest kernel will crash when it tries to turn on the MMU. This fixes it by looking for the /chosen/ibm,architecture-vec-5 property, and if it exists, clears the radix MMU feature bit, before we decide whether to initialize for radix or HPT. This property is created by the hypervisor as a result of the guest calling the ibm,client-architecture-support method to indicate its capabilities, so it will indicate whether the hypervisor agreed to us using radix. Systems without a hypervisor may have this property also (for example, skiboot creates it), so we check the HV bit in the MSR to see whether we are running as a guest or not. If we are in hypervisor mode, then we can do whatever we like including using the radix MMU. The reason for using this property is that in future, when we have support for using radix under a hypervisor, we will need to check this property to see whether the hypervisor agreed to us using radix. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-30 13:21:34 +03:00
vec5 = of_get_flat_dt_prop(chosen, "ibm,architecture-vec-5", &size);
if (!vec5) {
cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX;
powerpc/64: Don't try to use radix MMU under a hypervisor Currently, if the kernel is running on a POWER9 processor under a hypervisor, it will try to use the radix MMU even though it doesn't have the necessary code to use radix under a hypervisor (it doesn't negotiate use of radix, and it doesn't do the H_REGISTER_PROC_TBL hcall). The result is that the guest kernel will crash when it tries to turn on the MMU. This fixes it by looking for the /chosen/ibm,architecture-vec-5 property, and if it exists, clears the radix MMU feature bit, before we decide whether to initialize for radix or HPT. This property is created by the hypervisor as a result of the guest calling the ibm,client-architecture-support method to indicate its capabilities, so it will indicate whether the hypervisor agreed to us using radix. Systems without a hypervisor may have this property also (for example, skiboot creates it), so we check the HV bit in the MSR to see whether we are running as a guest or not. If we are in hypervisor mode, then we can do whatever we like including using the radix MMU. The reason for using this property is that in future, when we have support for using radix under a hypervisor, we will need to check this property to see whether the hypervisor agreed to us using radix. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-30 13:21:34 +03:00
return;
}
if (size <= OV5_INDX(OV5_MMU_SUPPORT)) {
cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX;
return;
}
/* Check for supported configuration */
mmu_supported = vec5[OV5_INDX(OV5_MMU_SUPPORT)] &
OV5_FEAT(OV5_MMU_SUPPORT);
if (mmu_supported == OV5_FEAT(OV5_MMU_RADIX)) {
/* Hypervisor only supports radix - check enabled && GTSE */
if (!early_radix_enabled()) {
pr_warn("WARNING: Ignoring cmdline option disable_radix\n");
}
if (!(vec5[OV5_INDX(OV5_RADIX_GTSE)] &
OV5_FEAT(OV5_RADIX_GTSE))) {
cur_cpu_spec->mmu_features &= ~MMU_FTR_GTSE;
} else
cur_cpu_spec->mmu_features |= MMU_FTR_GTSE;
/* Do radix anyway - the hypervisor said we had to */
cur_cpu_spec->mmu_features |= MMU_FTR_TYPE_RADIX;
} else if (mmu_supported == OV5_FEAT(OV5_MMU_HASH)) {
/* Hypervisor only supports hash - disable radix */
cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX;
cur_cpu_spec->mmu_features &= ~MMU_FTR_GTSE;
}
powerpc/64: Don't try to use radix MMU under a hypervisor Currently, if the kernel is running on a POWER9 processor under a hypervisor, it will try to use the radix MMU even though it doesn't have the necessary code to use radix under a hypervisor (it doesn't negotiate use of radix, and it doesn't do the H_REGISTER_PROC_TBL hcall). The result is that the guest kernel will crash when it tries to turn on the MMU. This fixes it by looking for the /chosen/ibm,architecture-vec-5 property, and if it exists, clears the radix MMU feature bit, before we decide whether to initialize for radix or HPT. This property is created by the hypervisor as a result of the guest calling the ibm,client-architecture-support method to indicate its capabilities, so it will indicate whether the hypervisor agreed to us using radix. Systems without a hypervisor may have this property also (for example, skiboot creates it), so we check the HV bit in the MSR to see whether we are running as a guest or not. If we are in hypervisor mode, then we can do whatever we like including using the radix MMU. The reason for using this property is that in future, when we have support for using radix under a hypervisor, we will need to check this property to see whether the hypervisor agreed to us using radix. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-30 13:21:34 +03:00
}
void __init mmu_early_init_devtree(void)
{
/* Disable radix mode based on kernel command line. */
if (disable_radix)
cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX;
powerpc/64: Don't try to use radix MMU under a hypervisor Currently, if the kernel is running on a POWER9 processor under a hypervisor, it will try to use the radix MMU even though it doesn't have the necessary code to use radix under a hypervisor (it doesn't negotiate use of radix, and it doesn't do the H_REGISTER_PROC_TBL hcall). The result is that the guest kernel will crash when it tries to turn on the MMU. This fixes it by looking for the /chosen/ibm,architecture-vec-5 property, and if it exists, clears the radix MMU feature bit, before we decide whether to initialize for radix or HPT. This property is created by the hypervisor as a result of the guest calling the ibm,client-architecture-support method to indicate its capabilities, so it will indicate whether the hypervisor agreed to us using radix. Systems without a hypervisor may have this property also (for example, skiboot creates it), so we check the HV bit in the MSR to see whether we are running as a guest or not. If we are in hypervisor mode, then we can do whatever we like including using the radix MMU. The reason for using this property is that in future, when we have support for using radix under a hypervisor, we will need to check this property to see whether the hypervisor agreed to us using radix. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-30 13:21:34 +03:00
/*
* Check /chosen/ibm,architecture-vec-5 if running as a guest.
* When running bare-metal, we can use radix if we like
* even though the ibm,architecture-vec-5 property created by
* skiboot doesn't have the necessary bits set.
*/
if (!(mfmsr() & MSR_HV))
powerpc/64: Don't try to use radix MMU under a hypervisor Currently, if the kernel is running on a POWER9 processor under a hypervisor, it will try to use the radix MMU even though it doesn't have the necessary code to use radix under a hypervisor (it doesn't negotiate use of radix, and it doesn't do the H_REGISTER_PROC_TBL hcall). The result is that the guest kernel will crash when it tries to turn on the MMU. This fixes it by looking for the /chosen/ibm,architecture-vec-5 property, and if it exists, clears the radix MMU feature bit, before we decide whether to initialize for radix or HPT. This property is created by the hypervisor as a result of the guest calling the ibm,client-architecture-support method to indicate its capabilities, so it will indicate whether the hypervisor agreed to us using radix. Systems without a hypervisor may have this property also (for example, skiboot creates it), so we check the HV bit in the MSR to see whether we are running as a guest or not. If we are in hypervisor mode, then we can do whatever we like including using the radix MMU. The reason for using this property is that in future, when we have support for using radix under a hypervisor, we will need to check this property to see whether the hypervisor agreed to us using radix. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-30 13:21:34 +03:00
early_check_vec5();
powerpc/book3s64/radix: Fix boot failure with large amount of guest memory If the hypervisor doesn't support hugepages, the kernel ends up allocating a large number of page table pages. The early page table allocation was wrongly setting the max memblock limit to ppc64_rma_size with radix translation which resulted in boot failure as shown below. Kernel panic - not syncing: early_alloc_pgtable: Failed to allocate 16777216 bytes align=0x1000000 nid=-1 from=0x0000000000000000 max_addr=0xffffffffffffffff CPU: 0 PID: 0 Comm: swapper Not tainted 5.8.0-24.9-default+ #2 Call Trace: [c0000000016f3d00] [c0000000007c6470] dump_stack+0xc4/0x114 (unreliable) [c0000000016f3d40] [c00000000014c78c] panic+0x164/0x418 [c0000000016f3dd0] [c000000000098890] early_alloc_pgtable+0xe0/0xec [c0000000016f3e60] [c0000000010a5440] radix__early_init_mmu+0x360/0x4b4 [c0000000016f3ef0] [c000000001099bac] early_init_mmu+0x1c/0x3c [c0000000016f3f10] [c00000000109a320] early_setup+0x134/0x170 This was because the kernel was checking for the radix feature before we enable the feature via mmu_features. This resulted in the kernel using hash restrictions on radix. Rework the early init code such that the kernel boot with memblock restrictions as imposed by hash. At that point, the kernel still hasn't finalized the translation the kernel will end up using. We have three different ways of detecting radix. 1. dt_cpu_ftrs_scan -> used only in case of PowerNV 2. ibm,pa-features -> Used when we don't use cpu_dt_ftr_scan 3. CAS -> Where we negotiate with hypervisor about the supported translation. We look at 1 or 2 early in the boot and after that, we look at the CAS vector to finalize the translation the kernel will use. We also support a kernel command line option (disable_radix) to switch to hash. Update the memblock limit after mmu_early_init_devtree() if the kernel is going to use radix translation. This forces some of the memblock allocations we do before mmu_early_init_devtree() to be within the RMA limit. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Reported-by: Shirisha Ganta <shiganta@in.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200828100852.426575-1-aneesh.kumar@linux.ibm.com
2020-08-28 13:08:52 +03:00
if (early_radix_enabled()) {
radix__early_init_devtree();
powerpc/book3s64/radix: Fix boot failure with large amount of guest memory If the hypervisor doesn't support hugepages, the kernel ends up allocating a large number of page table pages. The early page table allocation was wrongly setting the max memblock limit to ppc64_rma_size with radix translation which resulted in boot failure as shown below. Kernel panic - not syncing: early_alloc_pgtable: Failed to allocate 16777216 bytes align=0x1000000 nid=-1 from=0x0000000000000000 max_addr=0xffffffffffffffff CPU: 0 PID: 0 Comm: swapper Not tainted 5.8.0-24.9-default+ #2 Call Trace: [c0000000016f3d00] [c0000000007c6470] dump_stack+0xc4/0x114 (unreliable) [c0000000016f3d40] [c00000000014c78c] panic+0x164/0x418 [c0000000016f3dd0] [c000000000098890] early_alloc_pgtable+0xe0/0xec [c0000000016f3e60] [c0000000010a5440] radix__early_init_mmu+0x360/0x4b4 [c0000000016f3ef0] [c000000001099bac] early_init_mmu+0x1c/0x3c [c0000000016f3f10] [c00000000109a320] early_setup+0x134/0x170 This was because the kernel was checking for the radix feature before we enable the feature via mmu_features. This resulted in the kernel using hash restrictions on radix. Rework the early init code such that the kernel boot with memblock restrictions as imposed by hash. At that point, the kernel still hasn't finalized the translation the kernel will end up using. We have three different ways of detecting radix. 1. dt_cpu_ftrs_scan -> used only in case of PowerNV 2. ibm,pa-features -> Used when we don't use cpu_dt_ftr_scan 3. CAS -> Where we negotiate with hypervisor about the supported translation. We look at 1 or 2 early in the boot and after that, we look at the CAS vector to finalize the translation the kernel will use. We also support a kernel command line option (disable_radix) to switch to hash. Update the memblock limit after mmu_early_init_devtree() if the kernel is going to use radix translation. This forces some of the memblock allocations we do before mmu_early_init_devtree() to be within the RMA limit. Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines") Reported-by: Shirisha Ganta <shiganta@in.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200828100852.426575-1-aneesh.kumar@linux.ibm.com
2020-08-28 13:08:52 +03:00
/*
* We have finalized the translation we are going to use by now.
* Radix mode is not limited by RMA / VRMA addressing.
* Hence don't limit memblock allocations.
*/
ppc64_rma_size = ULONG_MAX;
memblock_set_current_limit(MEMBLOCK_ALLOC_ANYWHERE);
} else
hash__early_init_devtree();
}
#endif /* CONFIG_PPC_BOOK3S_64 */