microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/power/reset/Kconfig

117 строки
3.0 KiB
Plaintext
Исходник Обычный вид История

power: Add simple poweroff-gpio driver Given appropriate devicetree bindings, this driver registers a pm_power_off function to set a GPIO line high/low to power down your board. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by:Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-17 12:51:04 +04:00
menuconfig POWER_RESET
bool "Board level reset or power off"
help
Provides a number of drivers which either reset a complete board
or shut it down, by manipulating the main power supply on the board.
Say Y here to enable board reset and power off
power: reset: Add if statement instead of multiple depends on All the config option so far are depending on the POWER_RESET symbol Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2014-07-01 18:58:40 +04:00
if POWER_RESET
power: reset: Add as3722 power-off driver ams AS3722 supports the power off functionality to turn off system. This commit adds power off driver for ams AS3722. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-20 17:24:00 +04:00
config POWER_RESET_AS3722
bool "ams AS3722 power-off driver"
power: reset: Add if statement instead of multiple depends on All the config option so far are depending on the POWER_RESET symbol Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2014-07-01 18:58:40 +04:00
depends on MFD_AS3722
power: reset: Add as3722 power-off driver ams AS3722 supports the power off functionality to turn off system. This commit adds power off driver for ams AS3722. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-20 17:24:00 +04:00
help
This driver supports turning off board via a ams AS3722 power-off.
power: reset: Add AT91 poweroff driver Add a driver to handle the shutdown of the Atmel SoCs. This code used to be (and still is) in arch/arm/mach-at91. We didn't remove it yet so that we can convert all the boards to using this driver, before removing it entirely in a separate patch. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2014-07-03 16:07:18 +04:00
config POWER_RESET_AT91_POWEROFF
bool "Atmel AT91 poweroff driver"
ARM: at91/power/reset: fix Kconfig "depends on" directive MACH_AT91 doesn't exist so we can't "depend" on it. Fix the typo by using the proper ARCH_AT91 config option. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-01 12:26:04 +04:00
depends on ARCH_AT91
power: reset: Add AT91 poweroff driver Add a driver to handle the shutdown of the Atmel SoCs. This code used to be (and still is) in arch/arm/mach-at91. We didn't remove it yet so that we can convert all the boards to using this driver, before removing it entirely in a separate patch. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2014-07-03 16:07:18 +04:00
default SOC_AT91SAM9 || SOC_SAMA5
help
This driver supports poweroff for Atmel AT91SAM9 and SAMA5
SoCs
power: reset: Add AT91 reset driver Implement the reset behaviour of the various AT91 SoCS in drivers/power/reset. It used to be (and still is) located in arch/arm/mach-at91, and in order to preserve bisectability is not removed yet, but every board should be converted to use this driver instead. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2014-07-02 19:46:58 +04:00
config POWER_RESET_AT91_RESET
bool "Atmel AT91 reset driver"
ARM: at91/power/reset: fix Kconfig "depends on" directive MACH_AT91 doesn't exist so we can't "depend" on it. Fix the typo by using the proper ARCH_AT91 config option. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-01 12:26:04 +04:00
depends on ARCH_AT91
power: reset: Add AT91 reset driver Implement the reset behaviour of the various AT91 SoCS in drivers/power/reset. It used to be (and still is) located in arch/arm/mach-at91, and in order to preserve bisectability is not removed yet, but every board should be converted to use this driver instead. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2014-07-02 19:46:58 +04:00
default SOC_AT91SAM9 || SOC_SAMA5
help
This driver supports restart for Atmel AT91SAM9 and SAMA5
SoCs
power: reset: Add Axxia system reset driver Add Axxia (AXM55xx) SoC system reset driver. This driver handles only system reboot (and not power-off). Signed-off-by: Anders Berg <anders.berg@lsi.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-23 13:08:38 +04:00
config POWER_RESET_AXXIA
bool "LSI Axxia reset driver"
power: reset: Add if statement instead of multiple depends on All the config option so far are depending on the POWER_RESET symbol Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2014-07-01 18:58:40 +04:00
depends on ARCH_AXXIA
power: reset: Add Axxia system reset driver Add Axxia (AXM55xx) SoC system reset driver. This driver handles only system reboot (and not power-off). Signed-off-by: Anders Berg <anders.berg@lsi.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-23 13:08:38 +04:00
help
This driver supports restart for Axxia SoC.
Say Y if you have an Axxia family SoC.
power: reset: Add reboot driver for brcmstb Add support for reboot functionality on boards with ARM-based Broadcom STB chipsets. Make it built-in by default for ARCH_BRCMSTB, but allow it to be configurable under COMPILE_TEST. Signed-off-by: Marc Carino <marc.ceeeee@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2014-07-23 03:48:03 +04:00
config POWER_RESET_BRCMSTB
bool "Broadcom STB reset driver" if COMPILE_TEST
depends on POWER_RESET && ARM
default ARCH_BRCMSTB
help
This driver provides restart support for ARM-based Broadcom STB
boards.
Say Y here if you have an ARM-based Broadcom STB board and you wish
to have restart support.
power: Add simple poweroff-gpio driver Given appropriate devicetree bindings, this driver registers a pm_power_off function to set a GPIO line high/low to power down your board. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by:Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-17 12:51:04 +04:00
config POWER_RESET_GPIO
bool "GPIO power-off driver"
power: reset: Add if statement instead of multiple depends on All the config option so far are depending on the POWER_RESET symbol Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2014-07-01 18:58:40 +04:00
depends on OF_GPIO
power: Add simple poweroff-gpio driver Given appropriate devicetree bindings, this driver registers a pm_power_off function to set a GPIO line high/low to power down your board. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by:Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-17 12:51:04 +04:00
help
This driver supports turning off your board via a GPIO line.
If your board needs a GPIO high/low to power down, say Y and
create a binding in your devicetree.
power/reset: Add a new driver to turn QNAP board power off The QNAP NAS boxes have a microcontroller attached to the SoCs second serial port. By sending it a simple command, it will turn the power for the board off. This driver registers a function for pm_power_off to send such a command. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2012-12-28 16:25:09 +04:00
power: reset: move hisilicon reboot code Move reboot code from hisilicon platform driver into reset driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-13 13:11:28 +04:00
config POWER_RESET_HISI
bool "Hisilicon power-off driver"
depends on POWER_RESET && ARCH_HISI
help
Reboot support for Hisilicon boards.
power: reset: Add msm restart support Add support for restart and poweroff functionality present on MSM chipsets with the MPM2 ps-hold hardware. Signed-off-by: Abhimanyu Kapur <abhimany@codeaurora.org> Tested-by: Ivan T. Ivanov <iivanov@mm-sol.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-07-31 04:05:28 +04:00
config POWER_RESET_MSM
bool "Qualcomm MSM power-off driver"
power: reset: Add if statement instead of multiple depends on All the config option so far are depending on the POWER_RESET symbol Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2014-07-01 18:58:40 +04:00
depends on ARCH_QCOM
power: reset: Add msm restart support Add support for restart and poweroff functionality present on MSM chipsets with the MPM2 ps-hold hardware. Signed-off-by: Abhimanyu Kapur <abhimany@codeaurora.org> Tested-by: Ivan T. Ivanov <iivanov@mm-sol.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-07-31 04:05:28 +04:00
help
Power off and restart support for Qualcomm boards.
power/reset: Add a new driver to turn QNAP board power off The QNAP NAS boxes have a microcontroller attached to the SoCs second serial port. By sending it a simple command, it will turn the power for the board off. This driver registers a function for pm_power_off to send such a command. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2012-12-28 16:25:09 +04:00
config POWER_RESET_QNAP
bool "QNAP power-off driver"
power: reset: Add if statement instead of multiple depends on All the config option so far are depending on the POWER_RESET symbol Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2014-07-01 18:58:40 +04:00
depends on OF_GPIO && PLAT_ORION
power/reset: Add a new driver to turn QNAP board power off The QNAP NAS boxes have a microcontroller attached to the SoCs second serial port. By sending it a simple command, it will turn the power for the board off. This driver registers a function for pm_power_off to send such a command. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2012-12-28 16:25:09 +04:00
help
This driver supports turning off QNAP NAS devices by sending
commands to the microcontroller which controls the main power.
Say Y if you have a QNAP NAS.
power/reset: Add a new driver implementing 'power off by restarting' Some devices, Buffalo Linkstation LS-XHL and LS-CHLv2 for example, power-off by restarting to letting u-boot hold the SoC until the user presses a key. Add a generic driver to implement this. It binds a function to pm_power_off, which calls arm_pm_restart. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2012-12-28 16:25:11 +04:00
config POWER_RESET_RESTART
bool "Restart power-off driver"
depends on ARM
help
Some boards don't actually have the ability to power off.
Instead they restart, and u-boot holds the SoC until the
user presses a key. u-boot then boots into Linux.
arm: vexpress: Move the poweroff/restart code to drivers/power/reset This patch moves the arch/arm/mach-vexpress/reset.c functionality to drivers/platform/reset/ and adds the necessary Kconfig wiring. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Pawel Moll <pawel.moll@arm.com>
2013-01-15 15:24:14 +04:00
power: reset: Add Allwinner A31 reset code That code used to be in the machine code, but it's more fit here with other restart hooks. That will allow to cleanup the machine directory, while waiting for a proper watchdog driver for the A31. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-05-07 06:44:20 +04:00
config POWER_RESET_SUN6I
bool "Allwinner A31 SoC reset driver"
depends on ARCH_SUNXI
help
Reboot support for the Allwinner A31 SoCs.
arm: vexpress: Move the poweroff/restart code to drivers/power/reset This patch moves the arch/arm/mach-vexpress/reset.c functionality to drivers/platform/reset/ and adds the necessary Kconfig wiring. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Pawel Moll <pawel.moll@arm.com>
2013-01-15 15:24:14 +04:00
config POWER_RESET_VEXPRESS
power/reset: Make the vexpress driver optional on arm and arm64 The driver can be used on either arm or arm64 platforms, but the latter doesn't have any platform-specific configuration options, so it must be possible to manually enable the driver. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-06-10 19:12:01 +04:00
bool "ARM Versatile Express power-off and reset driver"
depends on ARM || ARM64
power: reset: Add if statement instead of multiple depends on All the config option so far are depending on the POWER_RESET symbol Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2014-07-01 18:58:40 +04:00
depends on VEXPRESS_CONFIG
arm: vexpress: Move the poweroff/restart code to drivers/power/reset This patch moves the arch/arm/mach-vexpress/reset.c functionality to drivers/platform/reset/ and adds the necessary Kconfig wiring. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Pawel Moll <pawel.moll@arm.com>
2013-01-15 15:24:14 +04:00
help
Power off and reset support for the ARM Ltd. Versatile
Express boards.
power: Add APM X-Gene system reboot driver Add APM X-Gene SoC system reboot driver. This driver handles only system reboot. System shutdown is board specific and can be handled by board driver or GPIO based shutdown driver. Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Feng Kan <fkan@apm.com> Signed-off-by: Kumar Sankaran <ksankaran@apm.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-07-03 00:38:58 +04:00
config POWER_RESET_XGENE
bool "APM SoC X-Gene reset driver"
depends on ARM64
help
Reboot support for the APM SoC X-Gene Eval boards.
power: reset: keystone-reset: introduce keystone reset driver The keystone SoC can be rebooted in several ways. By external reset pin, by soft and by watchdogs. To allow keystone SoC reset if watchdog is triggered we have to enable it in reset mux configuration register regarding of watchdog configuration. Also we need to set soft/hard reset we are going to use. So add keystone reset driver to handle all this stuff. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2014-05-24 00:32:39 +04:00
config POWER_RESET_KEYSTONE
bool "Keystone reset driver"
depends on ARCH_KEYSTONE
select MFD_SYSCON
help
Reboot support for the KEYSTONE SoCs.
power: reset: Add if statement instead of multiple depends on All the config option so far are depending on the POWER_RESET symbol Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2014-07-01 18:58:40 +04:00
endif