WSL2-Linux-Kernel/fs/xfs/xfs_aops.c

582 строки
16 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2000-2005 Silicon Graphics, Inc.
* Copyright (c) 2016-2018 Christoph Hellwig.
* All Rights Reserved.
*/
#include "xfs.h"
#include "xfs_shared.h"
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_trans_resv.h"
#include "xfs_mount.h"
#include "xfs_inode.h"
#include "xfs_trans.h"
#include "xfs_iomap.h"
xfs: event tracing support Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-15 02:14:59 +03:00
#include "xfs_trace.h"
#include "xfs_bmap.h"
#include "xfs_bmap_util.h"
#include "xfs_reflink.h"
xfs: Introduce writeback context for writepages xfs_vm_writepages() calls generic_writepages to writeback a range of a file, but then xfs_vm_writepage() clusters pages itself as it does not have any context it can pass between->writepage calls from __write_cache_pages(). Introduce a writeback context for xfs_vm_writepages() and call __write_cache_pages directly with our own writepage callback so that we can pass that context to each writepage invocation. This encapsulates the current mapping, whether it is valid or not, the current ioend and it's IO type and the ioend chain being built. This requires us to move the ioend submission up to the level where the writepage context is declared. This does mean we do not submit IO until we packaged the entire writeback range, but with the block plugging in the writepages call this is the way IO is submitted, anyway. It also means that we need to handle discontiguous page ranges. If the pages sent down by write_cache_pages to the writepage callback are discontiguous, we need to detect this and put each discontiguous page range into individual ioends. This is needed to ensure that the ioend accurately represents the range of the file that it covers so that file size updates during IO completion set the size correctly. Failure to take into account the discontiguous ranges results in files being too small when writeback patterns are non-sequential. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-02-15 09:21:19 +03:00
struct xfs_writepage_ctx {
struct iomap_writepage_ctx ctx;
xfs: validate writeback mapping using data fork seq counter The writeback code caches the current extent mapping across multiple xfs_do_writepage() calls to avoid repeated lookups for sequential pages backed by the same extent. This is known to be slightly racy with extent fork changes in certain difficult to reproduce scenarios. The cached extent is trimmed to within EOF to help avoid the most common vector for this problem via speculative preallocation management, but this is a band-aid that does not address the fundamental problem. Now that we have an xfs_ifork sequence counter mechanism used to facilitate COW writeback, we can use the same mechanism to validate consistency between the data fork and cached writeback mappings. On its face, this is somewhat of a big hammer approach because any change to the data fork invalidates any mapping currently cached by a writeback in progress regardless of whether the data fork change overlaps with the range under writeback. In practice, however, the impact of this approach is minimal in most cases. First, data fork changes (delayed allocations) caused by sustained sequential buffered writes are amortized across speculative preallocations. This means that a cached mapping won't be invalidated by each buffered write of a common file copy workload, but rather only on less frequent allocation events. Second, the extent tree is always entirely in-core so an additional lookup of a usable extent mostly costs a shared ilock cycle and in-memory tree lookup. This means that a cached mapping reval is relatively cheap compared to the I/O itself. Third, spurious invalidations don't impact ioend construction. This means that even if the same extent is revalidated multiple times across multiple writepage instances, we still construct and submit the same size ioend (and bio) if the blocks are physically contiguous. Update struct xfs_writepage_ctx with a new field to hold the sequence number of the data fork associated with the currently cached mapping. Check the wpc seqno against the data fork when the mapping is validated and reestablish the mapping whenever the fork has changed since the mapping was cached. This ensures that writeback always uses a valid extent mapping and thus prevents lost writebacks and stale delalloc block problems. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-02-01 20:14:23 +03:00
unsigned int data_seq;
unsigned int cow_seq;
xfs: Introduce writeback context for writepages xfs_vm_writepages() calls generic_writepages to writeback a range of a file, but then xfs_vm_writepage() clusters pages itself as it does not have any context it can pass between->writepage calls from __write_cache_pages(). Introduce a writeback context for xfs_vm_writepages() and call __write_cache_pages directly with our own writepage callback so that we can pass that context to each writepage invocation. This encapsulates the current mapping, whether it is valid or not, the current ioend and it's IO type and the ioend chain being built. This requires us to move the ioend submission up to the level where the writepage context is declared. This does mean we do not submit IO until we packaged the entire writeback range, but with the block plugging in the writepages call this is the way IO is submitted, anyway. It also means that we need to handle discontiguous page ranges. If the pages sent down by write_cache_pages to the writepage callback are discontiguous, we need to detect this and put each discontiguous page range into individual ioends. This is needed to ensure that the ioend accurately represents the range of the file that it covers so that file size updates during IO completion set the size correctly. Failure to take into account the discontiguous ranges results in files being too small when writeback patterns are non-sequential. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-02-15 09:21:19 +03:00
};
static inline struct xfs_writepage_ctx *
XFS_WPC(struct iomap_writepage_ctx *ctx)
{
return container_of(ctx, struct xfs_writepage_ctx, ctx);
}
/*
* Fast and loose check if this write could update the on-disk inode size.
*/
static inline bool xfs_ioend_is_append(struct iomap_ioend *ioend)
{
return ioend->io_offset + ioend->io_size >
XFS_I(ioend->io_inode)->i_disk_size;
}
[XFS] Fix to prevent the notorious 'NULL files' problem after a crash. The problem that has been addressed is that of synchronising updates of the file size with writes that extend a file. Without the fix the update of a file's size, as a result of a write beyond eof, is independent of when the cached data is flushed to disk. Often the file size update would be written to the filesystem log before the data is flushed to disk. When a system crashes between these two events and the filesystem log is replayed on mount the file's size will be set but since the contents never made it to disk the file is full of holes. If some of the cached data was flushed to disk then it may just be a section of the file at the end that has holes. There are existing fixes to help alleviate this problem, particularly in the case where a file has been truncated, that force cached data to be flushed to disk when the file is closed. If the system crashes while the file(s) are still open then this flushing will never occur. The fix that we have implemented is to introduce a second file size, called the in-memory file size, that represents the current file size as viewed by the user. The existing file size, called the on-disk file size, is the one that get's written to the filesystem log and we only update it when it is safe to do so. When we write to a file beyond eof we only update the in- memory file size in the write operation. Later when the I/O operation, that flushes the cached data to disk completes, an I/O completion routine will update the on-disk file size. The on-disk file size will be updated to the maximum offset of the I/O or to the value of the in-memory file size if the I/O includes eof. SGI-PV: 958522 SGI-Modid: xfs-linux-melb:xfs-kern:28322a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-08 07:49:46 +04:00
/*
* Update on-disk file size now that data has been written to disk.
[XFS] Fix to prevent the notorious 'NULL files' problem after a crash. The problem that has been addressed is that of synchronising updates of the file size with writes that extend a file. Without the fix the update of a file's size, as a result of a write beyond eof, is independent of when the cached data is flushed to disk. Often the file size update would be written to the filesystem log before the data is flushed to disk. When a system crashes between these two events and the filesystem log is replayed on mount the file's size will be set but since the contents never made it to disk the file is full of holes. If some of the cached data was flushed to disk then it may just be a section of the file at the end that has holes. There are existing fixes to help alleviate this problem, particularly in the case where a file has been truncated, that force cached data to be flushed to disk when the file is closed. If the system crashes while the file(s) are still open then this flushing will never occur. The fix that we have implemented is to introduce a second file size, called the in-memory file size, that represents the current file size as viewed by the user. The existing file size, called the on-disk file size, is the one that get's written to the filesystem log and we only update it when it is safe to do so. When we write to a file beyond eof we only update the in- memory file size in the write operation. Later when the I/O operation, that flushes the cached data to disk completes, an I/O completion routine will update the on-disk file size. The on-disk file size will be updated to the maximum offset of the I/O or to the value of the in-memory file size if the I/O includes eof. SGI-PV: 958522 SGI-Modid: xfs-linux-melb:xfs-kern:28322a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-08 07:49:46 +04:00
*/
int
xfs_setfilesize(
struct xfs_inode *ip,
xfs_off_t offset,
size_t size)
[XFS] Fix to prevent the notorious 'NULL files' problem after a crash. The problem that has been addressed is that of synchronising updates of the file size with writes that extend a file. Without the fix the update of a file's size, as a result of a write beyond eof, is independent of when the cached data is flushed to disk. Often the file size update would be written to the filesystem log before the data is flushed to disk. When a system crashes between these two events and the filesystem log is replayed on mount the file's size will be set but since the contents never made it to disk the file is full of holes. If some of the cached data was flushed to disk then it may just be a section of the file at the end that has holes. There are existing fixes to help alleviate this problem, particularly in the case where a file has been truncated, that force cached data to be flushed to disk when the file is closed. If the system crashes while the file(s) are still open then this flushing will never occur. The fix that we have implemented is to introduce a second file size, called the in-memory file size, that represents the current file size as viewed by the user. The existing file size, called the on-disk file size, is the one that get's written to the filesystem log and we only update it when it is safe to do so. When we write to a file beyond eof we only update the in- memory file size in the write operation. Later when the I/O operation, that flushes the cached data to disk completes, an I/O completion routine will update the on-disk file size. The on-disk file size will be updated to the maximum offset of the I/O or to the value of the in-memory file size if the I/O includes eof. SGI-PV: 958522 SGI-Modid: xfs-linux-melb:xfs-kern:28322a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-08 07:49:46 +04:00
{
struct xfs_mount *mp = ip->i_mount;
struct xfs_trans *tp;
[XFS] Fix to prevent the notorious 'NULL files' problem after a crash. The problem that has been addressed is that of synchronising updates of the file size with writes that extend a file. Without the fix the update of a file's size, as a result of a write beyond eof, is independent of when the cached data is flushed to disk. Often the file size update would be written to the filesystem log before the data is flushed to disk. When a system crashes between these two events and the filesystem log is replayed on mount the file's size will be set but since the contents never made it to disk the file is full of holes. If some of the cached data was flushed to disk then it may just be a section of the file at the end that has holes. There are existing fixes to help alleviate this problem, particularly in the case where a file has been truncated, that force cached data to be flushed to disk when the file is closed. If the system crashes while the file(s) are still open then this flushing will never occur. The fix that we have implemented is to introduce a second file size, called the in-memory file size, that represents the current file size as viewed by the user. The existing file size, called the on-disk file size, is the one that get's written to the filesystem log and we only update it when it is safe to do so. When we write to a file beyond eof we only update the in- memory file size in the write operation. Later when the I/O operation, that flushes the cached data to disk completes, an I/O completion routine will update the on-disk file size. The on-disk file size will be updated to the maximum offset of the I/O or to the value of the in-memory file size if the I/O includes eof. SGI-PV: 958522 SGI-Modid: xfs-linux-melb:xfs-kern:28322a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-08 07:49:46 +04:00
xfs_fsize_t isize;
int error;
error = xfs_trans_alloc(mp, &M_RES(mp)->tr_fsyncts, 0, 0, 0, &tp);
if (error)
return error;
[XFS] Fix to prevent the notorious 'NULL files' problem after a crash. The problem that has been addressed is that of synchronising updates of the file size with writes that extend a file. Without the fix the update of a file's size, as a result of a write beyond eof, is independent of when the cached data is flushed to disk. Often the file size update would be written to the filesystem log before the data is flushed to disk. When a system crashes between these two events and the filesystem log is replayed on mount the file's size will be set but since the contents never made it to disk the file is full of holes. If some of the cached data was flushed to disk then it may just be a section of the file at the end that has holes. There are existing fixes to help alleviate this problem, particularly in the case where a file has been truncated, that force cached data to be flushed to disk when the file is closed. If the system crashes while the file(s) are still open then this flushing will never occur. The fix that we have implemented is to introduce a second file size, called the in-memory file size, that represents the current file size as viewed by the user. The existing file size, called the on-disk file size, is the one that get's written to the filesystem log and we only update it when it is safe to do so. When we write to a file beyond eof we only update the in- memory file size in the write operation. Later when the I/O operation, that flushes the cached data to disk completes, an I/O completion routine will update the on-disk file size. The on-disk file size will be updated to the maximum offset of the I/O or to the value of the in-memory file size if the I/O includes eof. SGI-PV: 958522 SGI-Modid: xfs-linux-melb:xfs-kern:28322a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-08 07:49:46 +04:00
xfs_ilock(ip, XFS_ILOCK_EXCL);
isize = xfs_new_eof(ip, offset + size);
if (!isize) {
xfs_iunlock(ip, XFS_ILOCK_EXCL);
xfs_trans_cancel(tp);
return 0;
[XFS] Fix to prevent the notorious 'NULL files' problem after a crash. The problem that has been addressed is that of synchronising updates of the file size with writes that extend a file. Without the fix the update of a file's size, as a result of a write beyond eof, is independent of when the cached data is flushed to disk. Often the file size update would be written to the filesystem log before the data is flushed to disk. When a system crashes between these two events and the filesystem log is replayed on mount the file's size will be set but since the contents never made it to disk the file is full of holes. If some of the cached data was flushed to disk then it may just be a section of the file at the end that has holes. There are existing fixes to help alleviate this problem, particularly in the case where a file has been truncated, that force cached data to be flushed to disk when the file is closed. If the system crashes while the file(s) are still open then this flushing will never occur. The fix that we have implemented is to introduce a second file size, called the in-memory file size, that represents the current file size as viewed by the user. The existing file size, called the on-disk file size, is the one that get's written to the filesystem log and we only update it when it is safe to do so. When we write to a file beyond eof we only update the in- memory file size in the write operation. Later when the I/O operation, that flushes the cached data to disk completes, an I/O completion routine will update the on-disk file size. The on-disk file size will be updated to the maximum offset of the I/O or to the value of the in-memory file size if the I/O includes eof. SGI-PV: 958522 SGI-Modid: xfs-linux-melb:xfs-kern:28322a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-08 07:49:46 +04:00
}
trace_xfs_setfilesize(ip, offset, size);
ip->i_disk_size = isize;
xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
return xfs_trans_commit(tp);
}
/*
* IO write completion.
*/
STATIC void
xfs: implement per-inode writeback completion queues When scheduling writeback of dirty file data in the page cache, XFS uses IO completion workqueue items to ensure that filesystem metadata only updates after the write completes successfully. This is essential for converting unwritten extents to real extents at the right time and performing COW remappings. Unfortunately, XFS queues each IO completion work item to an unbounded workqueue, which means that the kernel can spawn dozens of threads to try to handle the items quickly. These threads need to take the ILOCK to update file metadata, which results in heavy ILOCK contention if a large number of the work items target a single file, which is inefficient. Worse yet, the writeback completion threads get stuck waiting for the ILOCK while holding transaction reservations, which can use up all available log reservation space. When that happens, metadata updates to other parts of the filesystem grind to a halt, even if the filesystem could otherwise have handled it. Even worse, if one of the things grinding to a halt happens to be a thread in the middle of a defer-ops finish holding the same ILOCK and trying to obtain more log reservation having exhausted the permanent reservation, we now have an ABBA deadlock - writeback completion has a transaction reserved and wants the ILOCK, and someone else has the ILOCK and wants a transaction reservation. Therefore, we create a per-inode writeback io completion queue + work item. When writeback finishes, it can add the ioend to the per-inode queue and let the single worker item process that queue. This dramatically cuts down on the number of kworkers and ILOCK contention in the system, and seems to have eliminated an occasional deadlock I was seeing while running generic/476. Testing with a program that simulates a heavy random-write workload to a single file demonstrates that the number of kworkers drops from approximately 120 threads per file to 1, without dramatically changing write bandwidth or pagecache access latency. Note that we leave the xfs-conv workqueue's max_active alone because we still want to be able to run ioend processing for as many inodes as the system can handle. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-04-15 23:13:20 +03:00
xfs_end_ioend(
struct iomap_ioend *ioend)
{
struct xfs_inode *ip = XFS_I(ioend->io_inode);
xfs_off_t offset = ioend->io_offset;
size_t size = ioend->io_size;
unsigned int nofs_flag;
int error;
[XFS] Fix to prevent the notorious 'NULL files' problem after a crash. The problem that has been addressed is that of synchronising updates of the file size with writes that extend a file. Without the fix the update of a file's size, as a result of a write beyond eof, is independent of when the cached data is flushed to disk. Often the file size update would be written to the filesystem log before the data is flushed to disk. When a system crashes between these two events and the filesystem log is replayed on mount the file's size will be set but since the contents never made it to disk the file is full of holes. If some of the cached data was flushed to disk then it may just be a section of the file at the end that has holes. There are existing fixes to help alleviate this problem, particularly in the case where a file has been truncated, that force cached data to be flushed to disk when the file is closed. If the system crashes while the file(s) are still open then this flushing will never occur. The fix that we have implemented is to introduce a second file size, called the in-memory file size, that represents the current file size as viewed by the user. The existing file size, called the on-disk file size, is the one that get's written to the filesystem log and we only update it when it is safe to do so. When we write to a file beyond eof we only update the in- memory file size in the write operation. Later when the I/O operation, that flushes the cached data to disk completes, an I/O completion routine will update the on-disk file size. The on-disk file size will be updated to the maximum offset of the I/O or to the value of the in-memory file size if the I/O includes eof. SGI-PV: 958522 SGI-Modid: xfs-linux-melb:xfs-kern:28322a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-08 07:49:46 +04:00
/*
* We can allocate memory here while doing writeback on behalf of
* memory reclaim. To avoid memory allocation deadlocks set the
* task-wide nofs context for the following operations.
*/
nofs_flag = memalloc_nofs_save();
/*
* Just clean up the in-memory structures if the fs has been shut down.
*/
if (XFS_FORCED_SHUTDOWN(ip->i_mount)) {
error = -EIO;
goto done;
}
/*
* Clean up any COW blocks on an I/O error.
*/
error = blk_status_to_errno(ioend->io_bio->bi_status);
if (unlikely(error)) {
if (ioend->io_flags & IOMAP_F_SHARED)
xfs_reflink_cancel_cow_range(ip, offset, size, true);
goto done;
}
/*
* Success: commit the COW or unwritten blocks if needed.
*/
if (ioend->io_flags & IOMAP_F_SHARED)
error = xfs_reflink_end_cow(ip, offset, size);
else if (ioend->io_type == IOMAP_UNWRITTEN)
error = xfs_iomap_write_unwritten(ip, offset, size, false);
[XFS] Fix to prevent the notorious 'NULL files' problem after a crash. The problem that has been addressed is that of synchronising updates of the file size with writes that extend a file. Without the fix the update of a file's size, as a result of a write beyond eof, is independent of when the cached data is flushed to disk. Often the file size update would be written to the filesystem log before the data is flushed to disk. When a system crashes between these two events and the filesystem log is replayed on mount the file's size will be set but since the contents never made it to disk the file is full of holes. If some of the cached data was flushed to disk then it may just be a section of the file at the end that has holes. There are existing fixes to help alleviate this problem, particularly in the case where a file has been truncated, that force cached data to be flushed to disk when the file is closed. If the system crashes while the file(s) are still open then this flushing will never occur. The fix that we have implemented is to introduce a second file size, called the in-memory file size, that represents the current file size as viewed by the user. The existing file size, called the on-disk file size, is the one that get's written to the filesystem log and we only update it when it is safe to do so. When we write to a file beyond eof we only update the in- memory file size in the write operation. Later when the I/O operation, that flushes the cached data to disk completes, an I/O completion routine will update the on-disk file size. The on-disk file size will be updated to the maximum offset of the I/O or to the value of the in-memory file size if the I/O includes eof. SGI-PV: 958522 SGI-Modid: xfs-linux-melb:xfs-kern:28322a Signed-off-by: Lachlan McIlroy <lachlan@sgi.com> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-08 07:49:46 +04:00
xfs: drop submit side trans alloc for append ioends Per-inode ioend completion batching has a log reservation deadlock vector between preallocated append transactions and transactions that are acquired at completion time for other purposes (i.e., unwritten extent conversion or COW fork remaps). For example, if the ioend completion workqueue task executes on a batch of ioends that are sorted such that an append ioend sits at the tail, it's possible for the outstanding append transaction reservation to block allocation of transactions required to process preceding ioends in the list. Append ioend completion is historically the common path for on-disk inode size updates. While file extending writes may have completed sometime earlier, the on-disk inode size is only updated after successful writeback completion. These transactions are preallocated serially from writeback context to mitigate concurrency and associated log reservation pressure across completions processed by multi-threaded workqueue tasks. However, now that delalloc blocks unconditionally map to unwritten extents at physical block allocation time, size updates via append ioends are relatively rare. This means that inode size updates most commonly occur as part of the preexisting completion time transaction to convert unwritten extents. As a result, there is no longer a strong need to preallocate size update transactions. Remove the preallocation of inode size update transactions to avoid the ioend completion processing log reservation deadlock. Instead, continue to send all potential size extending ioends to workqueue context for completion and allocate the transaction from that context. This ensures that no outstanding log reservation is owned by the ioend completion worker task when it begins to process ioends. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-04-09 20:27:43 +03:00
if (!error && xfs_ioend_is_append(ioend))
error = xfs_setfilesize(ip, ioend->io_offset, ioend->io_size);
done:
iomap_finish_ioends(ioend, error);
memalloc_nofs_restore(nofs_flag);
}
xfs: implement per-inode writeback completion queues When scheduling writeback of dirty file data in the page cache, XFS uses IO completion workqueue items to ensure that filesystem metadata only updates after the write completes successfully. This is essential for converting unwritten extents to real extents at the right time and performing COW remappings. Unfortunately, XFS queues each IO completion work item to an unbounded workqueue, which means that the kernel can spawn dozens of threads to try to handle the items quickly. These threads need to take the ILOCK to update file metadata, which results in heavy ILOCK contention if a large number of the work items target a single file, which is inefficient. Worse yet, the writeback completion threads get stuck waiting for the ILOCK while holding transaction reservations, which can use up all available log reservation space. When that happens, metadata updates to other parts of the filesystem grind to a halt, even if the filesystem could otherwise have handled it. Even worse, if one of the things grinding to a halt happens to be a thread in the middle of a defer-ops finish holding the same ILOCK and trying to obtain more log reservation having exhausted the permanent reservation, we now have an ABBA deadlock - writeback completion has a transaction reserved and wants the ILOCK, and someone else has the ILOCK and wants a transaction reservation. Therefore, we create a per-inode writeback io completion queue + work item. When writeback finishes, it can add the ioend to the per-inode queue and let the single worker item process that queue. This dramatically cuts down on the number of kworkers and ILOCK contention in the system, and seems to have eliminated an occasional deadlock I was seeing while running generic/476. Testing with a program that simulates a heavy random-write workload to a single file demonstrates that the number of kworkers drops from approximately 120 threads per file to 1, without dramatically changing write bandwidth or pagecache access latency. Note that we leave the xfs-conv workqueue's max_active alone because we still want to be able to run ioend processing for as many inodes as the system can handle. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-04-15 23:13:20 +03:00
/* Finish all pending io completions. */
void
xfs_end_io(
struct work_struct *work)
{
struct xfs_inode *ip =
container_of(work, struct xfs_inode, i_ioend_work);
struct iomap_ioend *ioend;
struct list_head tmp;
xfs: implement per-inode writeback completion queues When scheduling writeback of dirty file data in the page cache, XFS uses IO completion workqueue items to ensure that filesystem metadata only updates after the write completes successfully. This is essential for converting unwritten extents to real extents at the right time and performing COW remappings. Unfortunately, XFS queues each IO completion work item to an unbounded workqueue, which means that the kernel can spawn dozens of threads to try to handle the items quickly. These threads need to take the ILOCK to update file metadata, which results in heavy ILOCK contention if a large number of the work items target a single file, which is inefficient. Worse yet, the writeback completion threads get stuck waiting for the ILOCK while holding transaction reservations, which can use up all available log reservation space. When that happens, metadata updates to other parts of the filesystem grind to a halt, even if the filesystem could otherwise have handled it. Even worse, if one of the things grinding to a halt happens to be a thread in the middle of a defer-ops finish holding the same ILOCK and trying to obtain more log reservation having exhausted the permanent reservation, we now have an ABBA deadlock - writeback completion has a transaction reserved and wants the ILOCK, and someone else has the ILOCK and wants a transaction reservation. Therefore, we create a per-inode writeback io completion queue + work item. When writeback finishes, it can add the ioend to the per-inode queue and let the single worker item process that queue. This dramatically cuts down on the number of kworkers and ILOCK contention in the system, and seems to have eliminated an occasional deadlock I was seeing while running generic/476. Testing with a program that simulates a heavy random-write workload to a single file demonstrates that the number of kworkers drops from approximately 120 threads per file to 1, without dramatically changing write bandwidth or pagecache access latency. Note that we leave the xfs-conv workqueue's max_active alone because we still want to be able to run ioend processing for as many inodes as the system can handle. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-04-15 23:13:20 +03:00
unsigned long flags;
spin_lock_irqsave(&ip->i_ioend_lock, flags);
list_replace_init(&ip->i_ioend_list, &tmp);
xfs: implement per-inode writeback completion queues When scheduling writeback of dirty file data in the page cache, XFS uses IO completion workqueue items to ensure that filesystem metadata only updates after the write completes successfully. This is essential for converting unwritten extents to real extents at the right time and performing COW remappings. Unfortunately, XFS queues each IO completion work item to an unbounded workqueue, which means that the kernel can spawn dozens of threads to try to handle the items quickly. These threads need to take the ILOCK to update file metadata, which results in heavy ILOCK contention if a large number of the work items target a single file, which is inefficient. Worse yet, the writeback completion threads get stuck waiting for the ILOCK while holding transaction reservations, which can use up all available log reservation space. When that happens, metadata updates to other parts of the filesystem grind to a halt, even if the filesystem could otherwise have handled it. Even worse, if one of the things grinding to a halt happens to be a thread in the middle of a defer-ops finish holding the same ILOCK and trying to obtain more log reservation having exhausted the permanent reservation, we now have an ABBA deadlock - writeback completion has a transaction reserved and wants the ILOCK, and someone else has the ILOCK and wants a transaction reservation. Therefore, we create a per-inode writeback io completion queue + work item. When writeback finishes, it can add the ioend to the per-inode queue and let the single worker item process that queue. This dramatically cuts down on the number of kworkers and ILOCK contention in the system, and seems to have eliminated an occasional deadlock I was seeing while running generic/476. Testing with a program that simulates a heavy random-write workload to a single file demonstrates that the number of kworkers drops from approximately 120 threads per file to 1, without dramatically changing write bandwidth or pagecache access latency. Note that we leave the xfs-conv workqueue's max_active alone because we still want to be able to run ioend processing for as many inodes as the system can handle. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-04-15 23:13:20 +03:00
spin_unlock_irqrestore(&ip->i_ioend_lock, flags);
iomap_sort_ioends(&tmp);
while ((ioend = list_first_entry_or_null(&tmp, struct iomap_ioend,
io_list))) {
xfs: implement per-inode writeback completion queues When scheduling writeback of dirty file data in the page cache, XFS uses IO completion workqueue items to ensure that filesystem metadata only updates after the write completes successfully. This is essential for converting unwritten extents to real extents at the right time and performing COW remappings. Unfortunately, XFS queues each IO completion work item to an unbounded workqueue, which means that the kernel can spawn dozens of threads to try to handle the items quickly. These threads need to take the ILOCK to update file metadata, which results in heavy ILOCK contention if a large number of the work items target a single file, which is inefficient. Worse yet, the writeback completion threads get stuck waiting for the ILOCK while holding transaction reservations, which can use up all available log reservation space. When that happens, metadata updates to other parts of the filesystem grind to a halt, even if the filesystem could otherwise have handled it. Even worse, if one of the things grinding to a halt happens to be a thread in the middle of a defer-ops finish holding the same ILOCK and trying to obtain more log reservation having exhausted the permanent reservation, we now have an ABBA deadlock - writeback completion has a transaction reserved and wants the ILOCK, and someone else has the ILOCK and wants a transaction reservation. Therefore, we create a per-inode writeback io completion queue + work item. When writeback finishes, it can add the ioend to the per-inode queue and let the single worker item process that queue. This dramatically cuts down on the number of kworkers and ILOCK contention in the system, and seems to have eliminated an occasional deadlock I was seeing while running generic/476. Testing with a program that simulates a heavy random-write workload to a single file demonstrates that the number of kworkers drops from approximately 120 threads per file to 1, without dramatically changing write bandwidth or pagecache access latency. Note that we leave the xfs-conv workqueue's max_active alone because we still want to be able to run ioend processing for as many inodes as the system can handle. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-04-15 23:13:20 +03:00
list_del_init(&ioend->io_list);
iomap_ioend_try_merge(ioend, &tmp);
xfs: implement per-inode writeback completion queues When scheduling writeback of dirty file data in the page cache, XFS uses IO completion workqueue items to ensure that filesystem metadata only updates after the write completes successfully. This is essential for converting unwritten extents to real extents at the right time and performing COW remappings. Unfortunately, XFS queues each IO completion work item to an unbounded workqueue, which means that the kernel can spawn dozens of threads to try to handle the items quickly. These threads need to take the ILOCK to update file metadata, which results in heavy ILOCK contention if a large number of the work items target a single file, which is inefficient. Worse yet, the writeback completion threads get stuck waiting for the ILOCK while holding transaction reservations, which can use up all available log reservation space. When that happens, metadata updates to other parts of the filesystem grind to a halt, even if the filesystem could otherwise have handled it. Even worse, if one of the things grinding to a halt happens to be a thread in the middle of a defer-ops finish holding the same ILOCK and trying to obtain more log reservation having exhausted the permanent reservation, we now have an ABBA deadlock - writeback completion has a transaction reserved and wants the ILOCK, and someone else has the ILOCK and wants a transaction reservation. Therefore, we create a per-inode writeback io completion queue + work item. When writeback finishes, it can add the ioend to the per-inode queue and let the single worker item process that queue. This dramatically cuts down on the number of kworkers and ILOCK contention in the system, and seems to have eliminated an occasional deadlock I was seeing while running generic/476. Testing with a program that simulates a heavy random-write workload to a single file demonstrates that the number of kworkers drops from approximately 120 threads per file to 1, without dramatically changing write bandwidth or pagecache access latency. Note that we leave the xfs-conv workqueue's max_active alone because we still want to be able to run ioend processing for as many inodes as the system can handle. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-04-15 23:13:20 +03:00
xfs_end_ioend(ioend);
}
}
STATIC void
xfs_end_bio(
struct bio *bio)
{
struct iomap_ioend *ioend = bio->bi_private;
xfs: implement per-inode writeback completion queues When scheduling writeback of dirty file data in the page cache, XFS uses IO completion workqueue items to ensure that filesystem metadata only updates after the write completes successfully. This is essential for converting unwritten extents to real extents at the right time and performing COW remappings. Unfortunately, XFS queues each IO completion work item to an unbounded workqueue, which means that the kernel can spawn dozens of threads to try to handle the items quickly. These threads need to take the ILOCK to update file metadata, which results in heavy ILOCK contention if a large number of the work items target a single file, which is inefficient. Worse yet, the writeback completion threads get stuck waiting for the ILOCK while holding transaction reservations, which can use up all available log reservation space. When that happens, metadata updates to other parts of the filesystem grind to a halt, even if the filesystem could otherwise have handled it. Even worse, if one of the things grinding to a halt happens to be a thread in the middle of a defer-ops finish holding the same ILOCK and trying to obtain more log reservation having exhausted the permanent reservation, we now have an ABBA deadlock - writeback completion has a transaction reserved and wants the ILOCK, and someone else has the ILOCK and wants a transaction reservation. Therefore, we create a per-inode writeback io completion queue + work item. When writeback finishes, it can add the ioend to the per-inode queue and let the single worker item process that queue. This dramatically cuts down on the number of kworkers and ILOCK contention in the system, and seems to have eliminated an occasional deadlock I was seeing while running generic/476. Testing with a program that simulates a heavy random-write workload to a single file demonstrates that the number of kworkers drops from approximately 120 threads per file to 1, without dramatically changing write bandwidth or pagecache access latency. Note that we leave the xfs-conv workqueue's max_active alone because we still want to be able to run ioend processing for as many inodes as the system can handle. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-04-15 23:13:20 +03:00
struct xfs_inode *ip = XFS_I(ioend->io_inode);
unsigned long flags;
spin_lock_irqsave(&ip->i_ioend_lock, flags);
if (list_empty(&ip->i_ioend_list))
WARN_ON_ONCE(!queue_work(ip->i_mount->m_unwritten_workqueue,
&ip->i_ioend_work));
list_add_tail(&ioend->io_list, &ip->i_ioend_list);
spin_unlock_irqrestore(&ip->i_ioend_lock, flags);
}
xfs: validate writeback mapping using data fork seq counter The writeback code caches the current extent mapping across multiple xfs_do_writepage() calls to avoid repeated lookups for sequential pages backed by the same extent. This is known to be slightly racy with extent fork changes in certain difficult to reproduce scenarios. The cached extent is trimmed to within EOF to help avoid the most common vector for this problem via speculative preallocation management, but this is a band-aid that does not address the fundamental problem. Now that we have an xfs_ifork sequence counter mechanism used to facilitate COW writeback, we can use the same mechanism to validate consistency between the data fork and cached writeback mappings. On its face, this is somewhat of a big hammer approach because any change to the data fork invalidates any mapping currently cached by a writeback in progress regardless of whether the data fork change overlaps with the range under writeback. In practice, however, the impact of this approach is minimal in most cases. First, data fork changes (delayed allocations) caused by sustained sequential buffered writes are amortized across speculative preallocations. This means that a cached mapping won't be invalidated by each buffered write of a common file copy workload, but rather only on less frequent allocation events. Second, the extent tree is always entirely in-core so an additional lookup of a usable extent mostly costs a shared ilock cycle and in-memory tree lookup. This means that a cached mapping reval is relatively cheap compared to the I/O itself. Third, spurious invalidations don't impact ioend construction. This means that even if the same extent is revalidated multiple times across multiple writepage instances, we still construct and submit the same size ioend (and bio) if the blocks are physically contiguous. Update struct xfs_writepage_ctx with a new field to hold the sequence number of the data fork associated with the currently cached mapping. Check the wpc seqno against the data fork when the mapping is validated and reestablish the mapping whenever the fork has changed since the mapping was cached. This ensures that writeback always uses a valid extent mapping and thus prevents lost writebacks and stale delalloc block problems. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-02-01 20:14:23 +03:00
/*
* Fast revalidation of the cached writeback mapping. Return true if the current
* mapping is valid, false otherwise.
*/
static bool
xfs_imap_valid(
struct iomap_writepage_ctx *wpc,
xfs: validate writeback mapping using data fork seq counter The writeback code caches the current extent mapping across multiple xfs_do_writepage() calls to avoid repeated lookups for sequential pages backed by the same extent. This is known to be slightly racy with extent fork changes in certain difficult to reproduce scenarios. The cached extent is trimmed to within EOF to help avoid the most common vector for this problem via speculative preallocation management, but this is a band-aid that does not address the fundamental problem. Now that we have an xfs_ifork sequence counter mechanism used to facilitate COW writeback, we can use the same mechanism to validate consistency between the data fork and cached writeback mappings. On its face, this is somewhat of a big hammer approach because any change to the data fork invalidates any mapping currently cached by a writeback in progress regardless of whether the data fork change overlaps with the range under writeback. In practice, however, the impact of this approach is minimal in most cases. First, data fork changes (delayed allocations) caused by sustained sequential buffered writes are amortized across speculative preallocations. This means that a cached mapping won't be invalidated by each buffered write of a common file copy workload, but rather only on less frequent allocation events. Second, the extent tree is always entirely in-core so an additional lookup of a usable extent mostly costs a shared ilock cycle and in-memory tree lookup. This means that a cached mapping reval is relatively cheap compared to the I/O itself. Third, spurious invalidations don't impact ioend construction. This means that even if the same extent is revalidated multiple times across multiple writepage instances, we still construct and submit the same size ioend (and bio) if the blocks are physically contiguous. Update struct xfs_writepage_ctx with a new field to hold the sequence number of the data fork associated with the currently cached mapping. Check the wpc seqno against the data fork when the mapping is validated and reestablish the mapping whenever the fork has changed since the mapping was cached. This ensures that writeback always uses a valid extent mapping and thus prevents lost writebacks and stale delalloc block problems. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-02-01 20:14:23 +03:00
struct xfs_inode *ip,
loff_t offset)
xfs: validate writeback mapping using data fork seq counter The writeback code caches the current extent mapping across multiple xfs_do_writepage() calls to avoid repeated lookups for sequential pages backed by the same extent. This is known to be slightly racy with extent fork changes in certain difficult to reproduce scenarios. The cached extent is trimmed to within EOF to help avoid the most common vector for this problem via speculative preallocation management, but this is a band-aid that does not address the fundamental problem. Now that we have an xfs_ifork sequence counter mechanism used to facilitate COW writeback, we can use the same mechanism to validate consistency between the data fork and cached writeback mappings. On its face, this is somewhat of a big hammer approach because any change to the data fork invalidates any mapping currently cached by a writeback in progress regardless of whether the data fork change overlaps with the range under writeback. In practice, however, the impact of this approach is minimal in most cases. First, data fork changes (delayed allocations) caused by sustained sequential buffered writes are amortized across speculative preallocations. This means that a cached mapping won't be invalidated by each buffered write of a common file copy workload, but rather only on less frequent allocation events. Second, the extent tree is always entirely in-core so an additional lookup of a usable extent mostly costs a shared ilock cycle and in-memory tree lookup. This means that a cached mapping reval is relatively cheap compared to the I/O itself. Third, spurious invalidations don't impact ioend construction. This means that even if the same extent is revalidated multiple times across multiple writepage instances, we still construct and submit the same size ioend (and bio) if the blocks are physically contiguous. Update struct xfs_writepage_ctx with a new field to hold the sequence number of the data fork associated with the currently cached mapping. Check the wpc seqno against the data fork when the mapping is validated and reestablish the mapping whenever the fork has changed since the mapping was cached. This ensures that writeback always uses a valid extent mapping and thus prevents lost writebacks and stale delalloc block problems. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-02-01 20:14:23 +03:00
{
if (offset < wpc->iomap.offset ||
offset >= wpc->iomap.offset + wpc->iomap.length)
xfs: validate writeback mapping using data fork seq counter The writeback code caches the current extent mapping across multiple xfs_do_writepage() calls to avoid repeated lookups for sequential pages backed by the same extent. This is known to be slightly racy with extent fork changes in certain difficult to reproduce scenarios. The cached extent is trimmed to within EOF to help avoid the most common vector for this problem via speculative preallocation management, but this is a band-aid that does not address the fundamental problem. Now that we have an xfs_ifork sequence counter mechanism used to facilitate COW writeback, we can use the same mechanism to validate consistency between the data fork and cached writeback mappings. On its face, this is somewhat of a big hammer approach because any change to the data fork invalidates any mapping currently cached by a writeback in progress regardless of whether the data fork change overlaps with the range under writeback. In practice, however, the impact of this approach is minimal in most cases. First, data fork changes (delayed allocations) caused by sustained sequential buffered writes are amortized across speculative preallocations. This means that a cached mapping won't be invalidated by each buffered write of a common file copy workload, but rather only on less frequent allocation events. Second, the extent tree is always entirely in-core so an additional lookup of a usable extent mostly costs a shared ilock cycle and in-memory tree lookup. This means that a cached mapping reval is relatively cheap compared to the I/O itself. Third, spurious invalidations don't impact ioend construction. This means that even if the same extent is revalidated multiple times across multiple writepage instances, we still construct and submit the same size ioend (and bio) if the blocks are physically contiguous. Update struct xfs_writepage_ctx with a new field to hold the sequence number of the data fork associated with the currently cached mapping. Check the wpc seqno against the data fork when the mapping is validated and reestablish the mapping whenever the fork has changed since the mapping was cached. This ensures that writeback always uses a valid extent mapping and thus prevents lost writebacks and stale delalloc block problems. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-02-01 20:14:23 +03:00
return false;
/*
* If this is a COW mapping, it is sufficient to check that the mapping
* covers the offset. Be careful to check this first because the caller
* can revalidate a COW mapping without updating the data seqno.
*/
if (wpc->iomap.flags & IOMAP_F_SHARED)
xfs: validate writeback mapping using data fork seq counter The writeback code caches the current extent mapping across multiple xfs_do_writepage() calls to avoid repeated lookups for sequential pages backed by the same extent. This is known to be slightly racy with extent fork changes in certain difficult to reproduce scenarios. The cached extent is trimmed to within EOF to help avoid the most common vector for this problem via speculative preallocation management, but this is a band-aid that does not address the fundamental problem. Now that we have an xfs_ifork sequence counter mechanism used to facilitate COW writeback, we can use the same mechanism to validate consistency between the data fork and cached writeback mappings. On its face, this is somewhat of a big hammer approach because any change to the data fork invalidates any mapping currently cached by a writeback in progress regardless of whether the data fork change overlaps with the range under writeback. In practice, however, the impact of this approach is minimal in most cases. First, data fork changes (delayed allocations) caused by sustained sequential buffered writes are amortized across speculative preallocations. This means that a cached mapping won't be invalidated by each buffered write of a common file copy workload, but rather only on less frequent allocation events. Second, the extent tree is always entirely in-core so an additional lookup of a usable extent mostly costs a shared ilock cycle and in-memory tree lookup. This means that a cached mapping reval is relatively cheap compared to the I/O itself. Third, spurious invalidations don't impact ioend construction. This means that even if the same extent is revalidated multiple times across multiple writepage instances, we still construct and submit the same size ioend (and bio) if the blocks are physically contiguous. Update struct xfs_writepage_ctx with a new field to hold the sequence number of the data fork associated with the currently cached mapping. Check the wpc seqno against the data fork when the mapping is validated and reestablish the mapping whenever the fork has changed since the mapping was cached. This ensures that writeback always uses a valid extent mapping and thus prevents lost writebacks and stale delalloc block problems. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-02-01 20:14:23 +03:00
return true;
/*
* This is not a COW mapping. Check the sequence number of the data fork
* because concurrent changes could have invalidated the extent. Check
* the COW fork because concurrent changes since the last time we
* checked (and found nothing at this offset) could have added
* overlapping blocks.
*/
if (XFS_WPC(wpc)->data_seq != READ_ONCE(ip->i_df.if_seq))
xfs: validate writeback mapping using data fork seq counter The writeback code caches the current extent mapping across multiple xfs_do_writepage() calls to avoid repeated lookups for sequential pages backed by the same extent. This is known to be slightly racy with extent fork changes in certain difficult to reproduce scenarios. The cached extent is trimmed to within EOF to help avoid the most common vector for this problem via speculative preallocation management, but this is a band-aid that does not address the fundamental problem. Now that we have an xfs_ifork sequence counter mechanism used to facilitate COW writeback, we can use the same mechanism to validate consistency between the data fork and cached writeback mappings. On its face, this is somewhat of a big hammer approach because any change to the data fork invalidates any mapping currently cached by a writeback in progress regardless of whether the data fork change overlaps with the range under writeback. In practice, however, the impact of this approach is minimal in most cases. First, data fork changes (delayed allocations) caused by sustained sequential buffered writes are amortized across speculative preallocations. This means that a cached mapping won't be invalidated by each buffered write of a common file copy workload, but rather only on less frequent allocation events. Second, the extent tree is always entirely in-core so an additional lookup of a usable extent mostly costs a shared ilock cycle and in-memory tree lookup. This means that a cached mapping reval is relatively cheap compared to the I/O itself. Third, spurious invalidations don't impact ioend construction. This means that even if the same extent is revalidated multiple times across multiple writepage instances, we still construct and submit the same size ioend (and bio) if the blocks are physically contiguous. Update struct xfs_writepage_ctx with a new field to hold the sequence number of the data fork associated with the currently cached mapping. Check the wpc seqno against the data fork when the mapping is validated and reestablish the mapping whenever the fork has changed since the mapping was cached. This ensures that writeback always uses a valid extent mapping and thus prevents lost writebacks and stale delalloc block problems. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-02-01 20:14:23 +03:00
return false;
if (xfs_inode_has_cow_data(ip) &&
XFS_WPC(wpc)->cow_seq != READ_ONCE(ip->i_cowfp->if_seq))
xfs: validate writeback mapping using data fork seq counter The writeback code caches the current extent mapping across multiple xfs_do_writepage() calls to avoid repeated lookups for sequential pages backed by the same extent. This is known to be slightly racy with extent fork changes in certain difficult to reproduce scenarios. The cached extent is trimmed to within EOF to help avoid the most common vector for this problem via speculative preallocation management, but this is a band-aid that does not address the fundamental problem. Now that we have an xfs_ifork sequence counter mechanism used to facilitate COW writeback, we can use the same mechanism to validate consistency between the data fork and cached writeback mappings. On its face, this is somewhat of a big hammer approach because any change to the data fork invalidates any mapping currently cached by a writeback in progress regardless of whether the data fork change overlaps with the range under writeback. In practice, however, the impact of this approach is minimal in most cases. First, data fork changes (delayed allocations) caused by sustained sequential buffered writes are amortized across speculative preallocations. This means that a cached mapping won't be invalidated by each buffered write of a common file copy workload, but rather only on less frequent allocation events. Second, the extent tree is always entirely in-core so an additional lookup of a usable extent mostly costs a shared ilock cycle and in-memory tree lookup. This means that a cached mapping reval is relatively cheap compared to the I/O itself. Third, spurious invalidations don't impact ioend construction. This means that even if the same extent is revalidated multiple times across multiple writepage instances, we still construct and submit the same size ioend (and bio) if the blocks are physically contiguous. Update struct xfs_writepage_ctx with a new field to hold the sequence number of the data fork associated with the currently cached mapping. Check the wpc seqno against the data fork when the mapping is validated and reestablish the mapping whenever the fork has changed since the mapping was cached. This ensures that writeback always uses a valid extent mapping and thus prevents lost writebacks and stale delalloc block problems. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-02-01 20:14:23 +03:00
return false;
return true;
}
/*
* Pass in a dellalloc extent and convert it to real extents, return the real
* extent that maps offset_fsb in wpc->iomap.
*
* The current page is held locked so nothing could have removed the block
* backing offset_fsb, although it could have moved from the COW to the data
* fork by another thread.
*/
static int
xfs_convert_blocks(
struct iomap_writepage_ctx *wpc,
struct xfs_inode *ip,
int whichfork,
loff_t offset)
{
int error;
unsigned *seq;
if (whichfork == XFS_COW_FORK)
seq = &XFS_WPC(wpc)->cow_seq;
else
seq = &XFS_WPC(wpc)->data_seq;
/*
* Attempt to allocate whatever delalloc extent currently backs offset
* and put the result into wpc->iomap. Allocate in a loop because it
* may take several attempts to allocate real blocks for a contiguous
* delalloc extent if free space is sufficiently fragmented.
*/
do {
error = xfs_bmapi_convert_delalloc(ip, whichfork, offset,
&wpc->iomap, seq);
if (error)
return error;
} while (wpc->iomap.offset + wpc->iomap.length <= offset);
return 0;
}
static int
xfs_map_blocks(
struct iomap_writepage_ctx *wpc,
struct inode *inode,
loff_t offset)
{
struct xfs_inode *ip = XFS_I(inode);
struct xfs_mount *mp = ip->i_mount;
ssize_t count = i_blocksize(inode);
xfs_fileoff_t offset_fsb = XFS_B_TO_FSBT(mp, offset);
xfs_fileoff_t end_fsb = XFS_B_TO_FSB(mp, offset + count);
xfs: fix missing CoW blocks writeback conversion retry In commit 7588cbeec6df, we tried to fix a race stemming from the lack of coordination between higher level code that wants to allocate and remap CoW fork extents into the data fork. Christoph cites as examples the always_cow mode, and a directio write completion racing with writeback. According to the comments before the goto retry, we want to restart the lookup to catch the extent in the data fork, but we don't actually reset whichfork or cow_fsb, which means the second try executes using stale information. Up until now I think we've gotten lucky that either there's something left in the CoW fork to cause cow_fsb to be reset, or either data/cow fork sequence numbers have advanced enough to force a fresh lookup from the data fork. However, if we reach the retry with an empty stable CoW fork and a stable data fork, neither of those things happens. The retry foolishly re-calls xfs_convert_blocks on the CoW fork which fails again. This time, we toss the write. I've recently been working on extending reflink to the realtime device. When the realtime extent size is larger than a single block, we have to force the page cache to CoW the entire rt extent if a write (or fallocate) are not aligned with the rt extent size. The strategy I've chosen to deal with this is derived from Dave's blocksize > pagesize series: dirtying around the write range, and ensuring that writeback always starts mapping on an rt extent boundary. This has brought this race front and center, since generic/522 blows up immediately. However, I'm pretty sure this is a bug outright, independent of that. Fixes: 7588cbeec6df ("xfs: retry COW fork delalloc conversion when no extent was found") Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-11-03 04:14:06 +03:00
xfs_fileoff_t cow_fsb;
int whichfork;
struct xfs_bmbt_irec imap;
struct xfs_iext_cursor icur;
int retries = 0;
int error = 0;
xfs: validate writeback mapping using data fork seq counter The writeback code caches the current extent mapping across multiple xfs_do_writepage() calls to avoid repeated lookups for sequential pages backed by the same extent. This is known to be slightly racy with extent fork changes in certain difficult to reproduce scenarios. The cached extent is trimmed to within EOF to help avoid the most common vector for this problem via speculative preallocation management, but this is a band-aid that does not address the fundamental problem. Now that we have an xfs_ifork sequence counter mechanism used to facilitate COW writeback, we can use the same mechanism to validate consistency between the data fork and cached writeback mappings. On its face, this is somewhat of a big hammer approach because any change to the data fork invalidates any mapping currently cached by a writeback in progress regardless of whether the data fork change overlaps with the range under writeback. In practice, however, the impact of this approach is minimal in most cases. First, data fork changes (delayed allocations) caused by sustained sequential buffered writes are amortized across speculative preallocations. This means that a cached mapping won't be invalidated by each buffered write of a common file copy workload, but rather only on less frequent allocation events. Second, the extent tree is always entirely in-core so an additional lookup of a usable extent mostly costs a shared ilock cycle and in-memory tree lookup. This means that a cached mapping reval is relatively cheap compared to the I/O itself. Third, spurious invalidations don't impact ioend construction. This means that even if the same extent is revalidated multiple times across multiple writepage instances, we still construct and submit the same size ioend (and bio) if the blocks are physically contiguous. Update struct xfs_writepage_ctx with a new field to hold the sequence number of the data fork associated with the currently cached mapping. Check the wpc seqno against the data fork when the mapping is validated and reestablish the mapping whenever the fork has changed since the mapping was cached. This ensures that writeback always uses a valid extent mapping and thus prevents lost writebacks and stale delalloc block problems. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-02-01 20:14:23 +03:00
if (XFS_FORCED_SHUTDOWN(mp))
return -EIO;
/*
* COW fork blocks can overlap data fork blocks even if the blocks
* aren't shared. COW I/O always takes precedent, so we must always
* check for overlap on reflink inodes unless the mapping is already a
* COW one, or the COW fork hasn't changed from the last time we looked
* at it.
*
* It's safe to check the COW fork if_seq here without the ILOCK because
* we've indirectly protected against concurrent updates: writeback has
* the page locked, which prevents concurrent invalidations by reflink
* and directio and prevents concurrent buffered writes to the same
* page. Changes to if_seq always happen under i_lock, which protects
* against concurrent updates and provides a memory barrier on the way
* out that ensures that we always see the current value.
*/
if (xfs_imap_valid(wpc, ip, offset))
return 0;
/*
* If we don't have a valid map, now it's time to get a new one for this
* offset. This will convert delayed allocations (including COW ones)
* into real extents. If we return without a valid map, it means we
* landed in a hole and we skip the block.
*/
retry:
xfs: fix missing CoW blocks writeback conversion retry In commit 7588cbeec6df, we tried to fix a race stemming from the lack of coordination between higher level code that wants to allocate and remap CoW fork extents into the data fork. Christoph cites as examples the always_cow mode, and a directio write completion racing with writeback. According to the comments before the goto retry, we want to restart the lookup to catch the extent in the data fork, but we don't actually reset whichfork or cow_fsb, which means the second try executes using stale information. Up until now I think we've gotten lucky that either there's something left in the CoW fork to cause cow_fsb to be reset, or either data/cow fork sequence numbers have advanced enough to force a fresh lookup from the data fork. However, if we reach the retry with an empty stable CoW fork and a stable data fork, neither of those things happens. The retry foolishly re-calls xfs_convert_blocks on the CoW fork which fails again. This time, we toss the write. I've recently been working on extending reflink to the realtime device. When the realtime extent size is larger than a single block, we have to force the page cache to CoW the entire rt extent if a write (or fallocate) are not aligned with the rt extent size. The strategy I've chosen to deal with this is derived from Dave's blocksize > pagesize series: dirtying around the write range, and ensuring that writeback always starts mapping on an rt extent boundary. This has brought this race front and center, since generic/522 blows up immediately. However, I'm pretty sure this is a bug outright, independent of that. Fixes: 7588cbeec6df ("xfs: retry COW fork delalloc conversion when no extent was found") Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-11-03 04:14:06 +03:00
cow_fsb = NULLFILEOFF;
whichfork = XFS_DATA_FORK;
xfs_ilock(ip, XFS_ILOCK_SHARED);
ASSERT(!xfs_need_iread_extents(&ip->i_df));
/*
* Check if this is offset is covered by a COW extents, and if yes use
* it directly instead of looking up anything in the data fork.
*/
if (xfs_inode_has_cow_data(ip) &&
xfs_iext_lookup_extent(ip, ip->i_cowfp, offset_fsb, &icur, &imap))
cow_fsb = imap.br_startoff;
if (cow_fsb != NULLFILEOFF && cow_fsb <= offset_fsb) {
XFS_WPC(wpc)->cow_seq = READ_ONCE(ip->i_cowfp->if_seq);
xfs_iunlock(ip, XFS_ILOCK_SHARED);
whichfork = XFS_COW_FORK;
goto allocate_blocks;
}
/*
xfs: validate writeback mapping using data fork seq counter The writeback code caches the current extent mapping across multiple xfs_do_writepage() calls to avoid repeated lookups for sequential pages backed by the same extent. This is known to be slightly racy with extent fork changes in certain difficult to reproduce scenarios. The cached extent is trimmed to within EOF to help avoid the most common vector for this problem via speculative preallocation management, but this is a band-aid that does not address the fundamental problem. Now that we have an xfs_ifork sequence counter mechanism used to facilitate COW writeback, we can use the same mechanism to validate consistency between the data fork and cached writeback mappings. On its face, this is somewhat of a big hammer approach because any change to the data fork invalidates any mapping currently cached by a writeback in progress regardless of whether the data fork change overlaps with the range under writeback. In practice, however, the impact of this approach is minimal in most cases. First, data fork changes (delayed allocations) caused by sustained sequential buffered writes are amortized across speculative preallocations. This means that a cached mapping won't be invalidated by each buffered write of a common file copy workload, but rather only on less frequent allocation events. Second, the extent tree is always entirely in-core so an additional lookup of a usable extent mostly costs a shared ilock cycle and in-memory tree lookup. This means that a cached mapping reval is relatively cheap compared to the I/O itself. Third, spurious invalidations don't impact ioend construction. This means that even if the same extent is revalidated multiple times across multiple writepage instances, we still construct and submit the same size ioend (and bio) if the blocks are physically contiguous. Update struct xfs_writepage_ctx with a new field to hold the sequence number of the data fork associated with the currently cached mapping. Check the wpc seqno against the data fork when the mapping is validated and reestablish the mapping whenever the fork has changed since the mapping was cached. This ensures that writeback always uses a valid extent mapping and thus prevents lost writebacks and stale delalloc block problems. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-02-01 20:14:23 +03:00
* No COW extent overlap. Revalidate now that we may have updated
* ->cow_seq. If the data mapping is still valid, we're done.
*/
if (xfs_imap_valid(wpc, ip, offset)) {
xfs_iunlock(ip, XFS_ILOCK_SHARED);
return 0;
}
/*
* If we don't have a valid map, now it's time to get a new one for this
* offset. This will convert delayed allocations (including COW ones)
* into real extents.
*/
if (!xfs_iext_lookup_extent(ip, &ip->i_df, offset_fsb, &icur, &imap))
imap.br_startoff = end_fsb; /* fake a hole past EOF */
XFS_WPC(wpc)->data_seq = READ_ONCE(ip->i_df.if_seq);
xfs_iunlock(ip, XFS_ILOCK_SHARED);
/* landed in a hole or beyond EOF? */
if (imap.br_startoff > offset_fsb) {
imap.br_blockcount = imap.br_startoff - offset_fsb;
imap.br_startoff = offset_fsb;
imap.br_startblock = HOLESTARTBLOCK;
imap.br_state = XFS_EXT_NORM;
}
xfs: make xfs_writepage_map extent map centric xfs_writepage_map() iterates over the bufferheads on a page to decide what sort of IO to do and what actions to take. However, when it comes to reflink and deciding when it needs to execute a COW operation, we no longer look at the bufferhead state but instead we ignore than and look up internal state held in the COW fork extent list. This means xfs_writepage_map() is somewhat confused. It does stuff, then ignores it, then tries to handle the impedence mismatch by shovelling the results inside the existing mapping code. It works, but it's a bit of a mess and it makes it hard to fix the cached map bug that the writepage code currently has. To unify the two different mechanisms, we first have to choose a direction. That's already been set - we're de-emphasising bufferheads so they are no longer a control structure as we need to do taht to allow for eventual removal. Hence we need to move away from looking at bufferhead state to determine what operations we need to perform. We can't completely get rid of bufferheads yet - they do contain some state that is absolutely necessary, such as whether that part of the page contains valid data or not (buffer_uptodate()). Other state in the bufferhead is redundant: BH_dirty - the page is dirty, so we can ignore this and just write it BH_delay - we have delalloc extent info in the DATA fork extent tree BH_unwritten - same as BH_delay BH_mapped - indicates we've already used it once for IO and it is mapped to a disk address. Needs to be ignored for COW blocks. The BH_mapped flag is an interesting case - it's supposed to indicate that it's already mapped to disk and so we can just use it "as is". In theory, we don't even have to do an extent lookup to find where to write it too, but we have to do that anyway to determine we are actually writing over a valid extent. Hence it's not even serving the purpose of avoiding a an extent lookup during writeback, and so we can pretty much ignore it. Especially as we have to ignore it for COW operations... Therefore, use the extent map as the source of information to tell us what actions we need to take and what sort of IO we should perform. The first step is to have xfs_map_blocks() set the io type according to what it looks up. This means it can easily handle both normal overwrite and COW cases. The only thing we also need to add is the ability to return hole mappings. We need to return and cache hole mappings now for the case of multiple blocks per page. We no longer use the BH_mapped to indicate a block over a hole, so we have to get that info from xfs_map_blocks(). We cache it so that holes that span two pages don't need separate lookups. This allows us to avoid ever doing write IO over a hole, too. Now that we have xfs_map_blocks() returning both a cached map and the type of IO we need to perform, we can rewrite xfs_writepage_map() to drop all the bufferhead control. It's also much simplified because it doesn't need to explicitly handle COW operations. Instead of iterating bufferheads, it iterates blocks within the page and then looks up what per-block state is required from the appropriate bufferhead. It then validates the cached map, and if it's not valid, we get a new map. If we don't get a valid map or it's over a hole, we skip the block. At this point, we have to remap the bufferhead via xfs_map_at_offset(). As previously noted, we had to do this even if the buffer was already mapped as the mapping would be stale for XFS_IO_DELALLOC, XFS_IO_UNWRITTEN and XFS_IO_COW IO types. With xfs_map_blocks() now controlling the type, even XFS_IO_OVERWRITE types need remapping, as converted-but-not-yet- written delalloc extents beyond EOF can be reported at XFS_IO_OVERWRITE. Bufferheads that span such regions still need their BH_Delay flags cleared and their block numbers calculated, so we now unconditionally map each bufferhead before submission. But wait! There's more - remember the old "treat unwritten extents as holes on read" hack? Yeah, that means we can have a dirty page with unmapped, unwritten bufferheads that contain data! What makes these so special is that the unwritten "hole" bufferheads do not have a valid block device pointer, so if we attempt to write them xfs_add_to_ioend() blows up. So we make xfs_map_at_offset() do the "realtime or data device" lookup from the inode and ignore what was or wasn't put into the bufferhead when the buffer was instantiated. The astute reader will have realised by now that this code treats unwritten extents in multiple-blocks-per-page situations differently. If we get any combination of unwritten blocks on a dirty page that contain valid data in the page, we're going to convert them to real extents. This can actually be a win, because it means that pages with interleaving unwritten and written blocks will get converted to a single written extent with zeros replacing the interspersed unwritten blocks. This is actually good for reducing extent list and conversion overhead, and it means we issue a contiguous IO instead of lots of little ones. The downside is that we use up a little extra IO bandwidth. Neither of these seem like a bad thing given that spinning disks are seek sensitive, and SSDs/pmem have bandwidth to burn and the lower Io latency/CPU overhead of fewer, larger IOs will result in better performance on them... As a result of all this, the only state we actually care about from the bufferhead is a single flag - BH_Uptodate. We still use the bufferhead to pass some information to the bio via xfs_add_to_ioend(), but that is trivial to separate and pass explicitly. This means we really only need 1 bit of state per block per page from the buffered write path in the writeback path. Everything else we do with the bufferhead is purely to make the buffered IO front end continue to work correctly. i.e we've pretty much marginalised bufferheads in the writeback path completely. Signed-off-By: Dave Chinner <dchinner@redhat.com> [hch: forward port, refactor and split off bits into other commits] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-07-12 08:26:00 +03:00
/*
* Truncate to the next COW extent if there is one. This is the only
* opportunity to do this because we can skip COW fork lookups for the
* subsequent blocks in the mapping; however, the requirement to treat
* the COW range separately remains.
*/
if (cow_fsb != NULLFILEOFF &&
cow_fsb < imap.br_startoff + imap.br_blockcount)
imap.br_blockcount = cow_fsb - imap.br_startoff;
/* got a delalloc extent? */
if (imap.br_startblock != HOLESTARTBLOCK &&
isnullstartblock(imap.br_startblock))
goto allocate_blocks;
xfs_bmbt_to_iomap(ip, &wpc->iomap, &imap, 0);
trace_xfs_map_blocks_found(ip, offset, count, whichfork, &imap);
return 0;
allocate_blocks:
error = xfs_convert_blocks(wpc, ip, whichfork, offset);
if (error) {
/*
* If we failed to find the extent in the COW fork we might have
* raced with a COW to data fork conversion or truncate.
* Restart the lookup to catch the extent in the data fork for
* the former case, but prevent additional retries to avoid
* looping forever for the latter case.
*/
if (error == -EAGAIN && whichfork == XFS_COW_FORK && !retries++)
goto retry;
ASSERT(error != -EAGAIN);
return error;
}
/*
* Due to merging the return real extent might be larger than the
* original delalloc one. Trim the return extent to the next COW
* boundary again to force a re-lookup.
*/
if (whichfork != XFS_COW_FORK && cow_fsb != NULLFILEOFF) {
loff_t cow_offset = XFS_FSB_TO_B(mp, cow_fsb);
if (cow_offset < wpc->iomap.offset + wpc->iomap.length)
wpc->iomap.length = cow_offset - wpc->iomap.offset;
}
ASSERT(wpc->iomap.offset <= offset);
ASSERT(wpc->iomap.offset + wpc->iomap.length > offset);
trace_xfs_map_blocks_alloc(ip, offset, count, whichfork, &imap);
return 0;
}
static int
xfs_prepare_ioend(
struct iomap_ioend *ioend,
xfs: don't chain ioends during writepage submission Currently we can build a long ioend chain during ->writepages that gets attached to the writepage context. IO submission only then occurs when we finish all the writepage processing. This means we can have many ioends allocated and pending, and this violates the mempool guarantees that we need to give about forwards progress. i.e. we really should only have one ioend being built at a time, otherwise we may drain the mempool trying to allocate a new ioend and that blocks submission, completion and freeing of ioends that are already in progress. To prevent this situation from happening, we need to submit ioends for IO as soon as they are ready for dispatch rather than queuing them for later submission. This means the ioends have bios built immediately and they get queued on any plug that is current active. Hence if we schedule away from writeback, the ioends that have been built will make forwards progress due to the plug flushing on context switch. This will also prevent context switches from creating unnecessary IO submission latency. We can't completely avoid having nested IO allocation - when we have a block size smaller than a page size, we still need to hold the ioend submission until after we have marked the current page dirty. Hence we may need multiple ioends to be held while the current page is completely mapped and made ready for IO dispatch. We cannot avoid this problem - the current code already has this ioend chaining within a page so we can mostly ignore that it occurs. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-02-15 09:23:12 +03:00
int status)
{
unsigned int nofs_flag;
/*
* We can allocate memory here while doing writeback on behalf of
* memory reclaim. To avoid memory allocation deadlocks set the
* task-wide nofs context for the following operations.
*/
nofs_flag = memalloc_nofs_save();
xfs: mark speculative prealloc CoW fork extents unwritten Christoph Hellwig pointed out that there's a potentially nasty race when performing simultaneous nearby directio cow writes: "Thread 1 writes a range from B to c " B --------- C p "a little later thread 2 writes from A to B " A --------- B p [editor's note: the 'p' denote cowextsize boundaries, which I added to make this more clear] "but the code preallocates beyond B into the range where thread "1 has just written, but ->end_io hasn't been called yet. "But once ->end_io is called thread 2 has already allocated "up to the extent size hint into the write range of thread 1, "so the end_io handler will splice the unintialized blocks from "that preallocation back into the file right after B." We can avoid this race by ensuring that thread 1 cannot accidentally remap the blocks that thread 2 allocated (as part of speculative preallocation) as part of t2's write preparation in t1's end_io handler. The way we make this happen is by taking advantage of the unwritten extent flag as an intermediate step. Recall that when we begin the process of writing data to shared blocks, we create a delayed allocation extent in the CoW fork: D: --RRRRRRSSSRRRRRRRR--- C: ------DDDDDDD--------- When a thread prepares to CoW some dirty data out to disk, it will now convert the delalloc reservation into an /unwritten/ allocated extent in the cow fork. The da conversion code tries to opportunistically allocate as much of a (speculatively prealloc'd) extent as possible, so we may end up allocating a larger extent than we're actually writing out: D: --RRRRRRSSSRRRRRRRR--- U: ------UUUUUUU--------- Next, we convert only the part of the extent that we're actively planning to write to normal (i.e. not unwritten) status: D: --RRRRRRSSSRRRRRRRR--- U: ------UURRUUU--------- If the write succeeds, the end_cow function will now scan the relevant range of the CoW fork for real extents and remap only the real extents into the data fork: D: --RRRRRRRRSRRRRRRRR--- U: ------UU--UUU--------- This ensures that we never obliterate valid data fork extents with unwritten blocks from the CoW fork. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2017-02-03 02:14:02 +03:00
/* Convert CoW extents to regular */
if (!status && (ioend->io_flags & IOMAP_F_SHARED)) {
xfs: mark speculative prealloc CoW fork extents unwritten Christoph Hellwig pointed out that there's a potentially nasty race when performing simultaneous nearby directio cow writes: "Thread 1 writes a range from B to c " B --------- C p "a little later thread 2 writes from A to B " A --------- B p [editor's note: the 'p' denote cowextsize boundaries, which I added to make this more clear] "but the code preallocates beyond B into the range where thread "1 has just written, but ->end_io hasn't been called yet. "But once ->end_io is called thread 2 has already allocated "up to the extent size hint into the write range of thread 1, "so the end_io handler will splice the unintialized blocks from "that preallocation back into the file right after B." We can avoid this race by ensuring that thread 1 cannot accidentally remap the blocks that thread 2 allocated (as part of speculative preallocation) as part of t2's write preparation in t1's end_io handler. The way we make this happen is by taking advantage of the unwritten extent flag as an intermediate step. Recall that when we begin the process of writing data to shared blocks, we create a delayed allocation extent in the CoW fork: D: --RRRRRRSSSRRRRRRRR--- C: ------DDDDDDD--------- When a thread prepares to CoW some dirty data out to disk, it will now convert the delalloc reservation into an /unwritten/ allocated extent in the cow fork. The da conversion code tries to opportunistically allocate as much of a (speculatively prealloc'd) extent as possible, so we may end up allocating a larger extent than we're actually writing out: D: --RRRRRRSSSRRRRRRRR--- U: ------UUUUUUU--------- Next, we convert only the part of the extent that we're actively planning to write to normal (i.e. not unwritten) status: D: --RRRRRRSSSRRRRRRRR--- U: ------UURRUUU--------- If the write succeeds, the end_cow function will now scan the relevant range of the CoW fork for real extents and remap only the real extents into the data fork: D: --RRRRRRRRSRRRRRRRR--- U: ------UU--UUU--------- This ensures that we never obliterate valid data fork extents with unwritten blocks from the CoW fork. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2017-02-03 02:14:02 +03:00
status = xfs_reflink_convert_cow(XFS_I(ioend->io_inode),
ioend->io_offset, ioend->io_size);
}
memalloc_nofs_restore(nofs_flag);
/* send ioends that might require a transaction to the completion wq */
if (xfs_ioend_is_append(ioend) || ioend->io_type == IOMAP_UNWRITTEN ||
(ioend->io_flags & IOMAP_F_SHARED))
ioend->io_bio->bi_end_io = xfs_end_bio;
return status;
}
/*
* If the page has delalloc blocks on it, we need to punch them out before we
* invalidate the page. If we don't, we leave a stale delalloc mapping on the
* inode that can trip up a later direct I/O read operation on the same region.
*
* We prevent this by truncating away the delalloc regions on the page. Because
* they are delalloc, we can do this without needing a transaction. Indeed - if
* we get ENOSPC errors, we have to be able to do this truncation without a
* transaction as there is no space left for block reservation (typically why we
* see a ENOSPC in writeback).
*/
static void
xfs_discard_page(
struct page *page,
loff_t fileoff)
{
struct inode *inode = page->mapping->host;
struct xfs_inode *ip = XFS_I(inode);
struct xfs_mount *mp = ip->i_mount;
unsigned int pageoff = offset_in_page(fileoff);
xfs_fileoff_t start_fsb = XFS_B_TO_FSBT(mp, fileoff);
xfs_fileoff_t pageoff_fsb = XFS_B_TO_FSBT(mp, pageoff);
int error;
if (XFS_FORCED_SHUTDOWN(mp))
goto out_invalidate;
xfs_alert_ratelimited(mp,
"page discard on page "PTR_FMT", inode 0x%llx, offset %llu.",
page, ip->i_ino, fileoff);
error = xfs_bmap_punch_delalloc_range(ip, start_fsb,
i_blocks_per_page(inode, page) - pageoff_fsb);
if (error && !XFS_FORCED_SHUTDOWN(mp))
xfs_alert(mp, "page discard unable to remove delalloc mapping.");
out_invalidate:
iomap_invalidatepage(page, pageoff, PAGE_SIZE - pageoff);
}
static const struct iomap_writeback_ops xfs_writeback_ops = {
.map_blocks = xfs_map_blocks,
.prepare_ioend = xfs_prepare_ioend,
.discard_page = xfs_discard_page,
};
xfs: Introduce writeback context for writepages xfs_vm_writepages() calls generic_writepages to writeback a range of a file, but then xfs_vm_writepage() clusters pages itself as it does not have any context it can pass between->writepage calls from __write_cache_pages(). Introduce a writeback context for xfs_vm_writepages() and call __write_cache_pages directly with our own writepage callback so that we can pass that context to each writepage invocation. This encapsulates the current mapping, whether it is valid or not, the current ioend and it's IO type and the ioend chain being built. This requires us to move the ioend submission up to the level where the writepage context is declared. This does mean we do not submit IO until we packaged the entire writeback range, but with the block plugging in the writepages call this is the way IO is submitted, anyway. It also means that we need to handle discontiguous page ranges. If the pages sent down by write_cache_pages to the writepage callback are discontiguous, we need to detect this and put each discontiguous page range into individual ioends. This is needed to ensure that the ioend accurately represents the range of the file that it covers so that file size updates during IO completion set the size correctly. Failure to take into account the discontiguous ranges results in files being too small when writeback patterns are non-sequential. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-02-15 09:21:19 +03:00
STATIC int
xfs_vm_writepage(
struct page *page,
struct writeback_control *wbc)
{
struct xfs_writepage_ctx wpc = { };
xfs: Introduce writeback context for writepages xfs_vm_writepages() calls generic_writepages to writeback a range of a file, but then xfs_vm_writepage() clusters pages itself as it does not have any context it can pass between->writepage calls from __write_cache_pages(). Introduce a writeback context for xfs_vm_writepages() and call __write_cache_pages directly with our own writepage callback so that we can pass that context to each writepage invocation. This encapsulates the current mapping, whether it is valid or not, the current ioend and it's IO type and the ioend chain being built. This requires us to move the ioend submission up to the level where the writepage context is declared. This does mean we do not submit IO until we packaged the entire writeback range, but with the block plugging in the writepages call this is the way IO is submitted, anyway. It also means that we need to handle discontiguous page ranges. If the pages sent down by write_cache_pages to the writepage callback are discontiguous, we need to detect this and put each discontiguous page range into individual ioends. This is needed to ensure that the ioend accurately represents the range of the file that it covers so that file size updates during IO completion set the size correctly. Failure to take into account the discontiguous ranges results in files being too small when writeback patterns are non-sequential. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-02-15 09:21:19 +03:00
if (WARN_ON_ONCE(current->journal_info)) {
redirty_page_for_writepage(wbc, page);
unlock_page(page);
return 0;
}
return iomap_writepage(page, wbc, &wpc.ctx, &xfs_writeback_ops);
xfs: Introduce writeback context for writepages xfs_vm_writepages() calls generic_writepages to writeback a range of a file, but then xfs_vm_writepage() clusters pages itself as it does not have any context it can pass between->writepage calls from __write_cache_pages(). Introduce a writeback context for xfs_vm_writepages() and call __write_cache_pages directly with our own writepage callback so that we can pass that context to each writepage invocation. This encapsulates the current mapping, whether it is valid or not, the current ioend and it's IO type and the ioend chain being built. This requires us to move the ioend submission up to the level where the writepage context is declared. This does mean we do not submit IO until we packaged the entire writeback range, but with the block plugging in the writepages call this is the way IO is submitted, anyway. It also means that we need to handle discontiguous page ranges. If the pages sent down by write_cache_pages to the writepage callback are discontiguous, we need to detect this and put each discontiguous page range into individual ioends. This is needed to ensure that the ioend accurately represents the range of the file that it covers so that file size updates during IO completion set the size correctly. Failure to take into account the discontiguous ranges results in files being too small when writeback patterns are non-sequential. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-02-15 09:21:19 +03:00
}
STATIC int
xfs_vm_writepages(
struct address_space *mapping,
struct writeback_control *wbc)
{
struct xfs_writepage_ctx wpc = { };
xfs: Introduce writeback context for writepages xfs_vm_writepages() calls generic_writepages to writeback a range of a file, but then xfs_vm_writepage() clusters pages itself as it does not have any context it can pass between->writepage calls from __write_cache_pages(). Introduce a writeback context for xfs_vm_writepages() and call __write_cache_pages directly with our own writepage callback so that we can pass that context to each writepage invocation. This encapsulates the current mapping, whether it is valid or not, the current ioend and it's IO type and the ioend chain being built. This requires us to move the ioend submission up to the level where the writepage context is declared. This does mean we do not submit IO until we packaged the entire writeback range, but with the block plugging in the writepages call this is the way IO is submitted, anyway. It also means that we need to handle discontiguous page ranges. If the pages sent down by write_cache_pages to the writepage callback are discontiguous, we need to detect this and put each discontiguous page range into individual ioends. This is needed to ensure that the ioend accurately represents the range of the file that it covers so that file size updates during IO completion set the size correctly. Failure to take into account the discontiguous ranges results in files being too small when writeback patterns are non-sequential. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-02-15 09:21:19 +03:00
/*
* Writing back data in a transaction context can result in recursive
* transactions. This is bad, so issue a warning and get out of here.
*/
if (WARN_ON_ONCE(current->journal_info))
return 0;
xfs_iflags_clear(XFS_I(mapping->host), XFS_ITRUNCATED);
return iomap_writepages(mapping, wbc, &wpc.ctx, &xfs_writeback_ops);
}
STATIC int
xfs_dax_writepages(
struct address_space *mapping,
struct writeback_control *wbc)
{
struct xfs_inode *ip = XFS_I(mapping->host);
xfs_iflags_clear(ip, XFS_ITRUNCATED);
return dax_writeback_mapping_range(mapping,
xfs_inode_buftarg(ip)->bt_daxdev, wbc);
}
STATIC sector_t
xfs_vm_bmap(
struct address_space *mapping,
sector_t block)
{
struct xfs_inode *ip = XFS_I(mapping->host);
trace_xfs_vm_bmap(ip);
/*
* The swap code (ab-)uses ->bmap to get a block mapping and then
* bypasses the file system for actual I/O. We really can't allow
* that on reflinks inodes, so we have to skip out here. And yes,
* 0 is the magic code for a bmap error.
*
* Since we don't pass back blockdev info, we can't return bmap
* information for rt files either.
*/
xfs: introduce an always_cow mode Add a mode where XFS never overwrites existing blocks in place. This is to aid debugging our COW code, and also put infatructure in place for things like possible future support for zoned block devices, which can't support overwrites. This mode is enabled globally by doing a: echo 1 > /sys/fs/xfs/debug/always_cow Note that the parameter is global to allow running all tests in xfstests easily in this mode, which would not easily be possible with a per-fs sysfs file. In always_cow mode persistent preallocations are disabled, and fallocate will fail when called with a 0 mode (with our without FALLOC_FL_KEEP_SIZE), and not create unwritten extent for zeroed space when called with FALLOC_FL_ZERO_RANGE or FALLOC_FL_UNSHARE_RANGE. There are a few interesting xfstests failures when run in always_cow mode: - generic/392 fails because the bytes used in the file used to test hole punch recovery are less after the log replay. This is because the blocks written and then punched out are only freed with a delay due to the logging mechanism. - xfs/170 will fail as the already fragile file streams mechanism doesn't seem to interact well with the COW allocator - xfs/180 xfs/182 xfs/192 xfs/198 xfs/204 and xfs/208 will claim the file system is badly fragmented, but there is not much we can do to avoid that when always writing out of place - xfs/205 fails because overwriting a file in always_cow mode will require new space allocation and the assumption in the test thus don't work anymore. - xfs/326 fails to modify the file at all in always_cow mode after injecting the refcount error, leading to an unexpected md5sum after the remount, but that again is expected Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-02-18 20:38:49 +03:00
if (xfs_is_cow_inode(ip) || XFS_IS_REALTIME_INODE(ip))
return 0;
return iomap_bmap(mapping, block, &xfs_read_iomap_ops);
}
STATIC int
xfs_vm_readpage(
struct file *unused,
struct page *page)
{
return iomap_readpage(page, &xfs_read_iomap_ops);
}
STATIC void
xfs_vm_readahead(
struct readahead_control *rac)
{
iomap_readahead(rac, &xfs_read_iomap_ops);
xfs: don't dirty buffers beyond EOF generic/263 is failing fsx at this point with a page spanning EOF that cannot be invalidated. The operations are: 1190 mapwrite 0x52c00 thru 0x5e569 (0xb96a bytes) 1191 mapread 0x5c000 thru 0x5d636 (0x1637 bytes) 1192 write 0x5b600 thru 0x771ff (0x1bc00 bytes) where 1190 extents EOF from 0x54000 to 0x5e569. When the direct IO write attempts to invalidate the cached page over this range, it fails with -EBUSY and so any attempt to do page invalidation fails. The real question is this: Why can't that page be invalidated after it has been written to disk and cleaned? Well, there's data on the first two buffers in the page (1k block size, 4k page), but the third buffer on the page (i.e. beyond EOF) is failing drop_buffers because it's bh->b_state == 0x3, which is BH_Uptodate | BH_Dirty. IOWs, there's dirty buffers beyond EOF. Say what? OK, set_buffer_dirty() is called on all buffers from __set_page_buffers_dirty(), regardless of whether the buffer is beyond EOF or not, which means that when we get to ->writepage, we have buffers marked dirty beyond EOF that we need to clean. So, we need to implement our own .set_page_dirty method that doesn't dirty buffers beyond EOF. This is messy because the buffer code is not meant to be shared and it has interesting locking issues on the buffer dirty bits. So just copy and paste it and then modify it to suit what we need. Note: the solutions the other filesystems and generic block code use of marking the buffers clean in ->writepage does not work for XFS. It still leaves dirty buffers beyond EOF and invalidations still fail. Hence rather than play whack-a-mole, this patch simply prevents those buffers from being dirtied in the first place. cc: <stable@kernel.org> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-09-02 06:12:51 +04:00
}
static int
xfs_iomap_swapfile_activate(
struct swap_info_struct *sis,
struct file *swap_file,
sector_t *span)
{
sis->bdev = xfs_inode_buftarg(XFS_I(file_inode(swap_file)))->bt_bdev;
return iomap_swapfile_activate(sis, swap_file, span,
&xfs_read_iomap_ops);
}
const struct address_space_operations xfs_address_space_operations = {
.readpage = xfs_vm_readpage,
.readahead = xfs_vm_readahead,
.writepage = xfs_vm_writepage,
.writepages = xfs_vm_writepages,
.set_page_dirty = iomap_set_page_dirty,
.releasepage = iomap_releasepage,
.invalidatepage = iomap_invalidatepage,
.bmap = xfs_vm_bmap,
.direct_IO = noop_direct_IO,
.migratepage = iomap_migrate_page,
.is_partially_uptodate = iomap_is_partially_uptodate,
.error_remove_page = generic_error_remove_page,
.swap_activate = xfs_iomap_swapfile_activate,
};
const struct address_space_operations xfs_dax_aops = {
.writepages = xfs_dax_writepages,
.direct_IO = noop_direct_IO,
.set_page_dirty = noop_set_page_dirty,
.invalidatepage = noop_invalidatepage,
.swap_activate = xfs_iomap_swapfile_activate,
};