WSL2-Linux-Kernel/security/selinux/ima.c

126 строки
2.9 KiB
C
Исходник Обычный вид История

selinux: include a consumer of the new IMA critical data hook SELinux stores the active policy in memory, so the changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring in-memory SELinux policy through IMA subsystem provides a secure way for the attestation service to remotely validate the policy contents at runtime. Measure the hash of the loaded policy by calling the IMA hook ima_measure_critical_data(). Since the size of the loaded policy can be large (several MB), measure the hash of the policy instead of the entire policy to avoid bloating the IMA log entry. To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.10.0-rc1+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of the hash of SELinux policy: To verify the measured data with the current SELinux policy run the following commands and verify the output hash values match. sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1 grep "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 Note that the actual verification of SELinux policy would require loading the expected policy into an identical kernel on a pristine/known-safe system and run the sha256sum /sys/kernel/selinux/policy there to get the expected hash. Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-01-14 22:15:22 +03:00
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2021 Microsoft Corporation
*
* Author: Lakshmi Ramasubramanian (nramas@linux.microsoft.com)
*
* Measure critical data structures maintainted by SELinux
* using IMA subsystem.
*/
#include <linux/vmalloc.h>
#include <linux/ima.h>
#include "security.h"
#include "ima.h"
/*
selinux: measure state and policy capabilities SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-12 19:37:09 +03:00
* selinux_ima_collect_state - Read selinux configuration settings
selinux: include a consumer of the new IMA critical data hook SELinux stores the active policy in memory, so the changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring in-memory SELinux policy through IMA subsystem provides a secure way for the attestation service to remotely validate the policy contents at runtime. Measure the hash of the loaded policy by calling the IMA hook ima_measure_critical_data(). Since the size of the loaded policy can be large (several MB), measure the hash of the policy instead of the entire policy to avoid bloating the IMA log entry. To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.10.0-rc1+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of the hash of SELinux policy: To verify the measured data with the current SELinux policy run the following commands and verify the output hash values match. sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1 grep "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 Note that the actual verification of SELinux policy would require loading the expected policy into an identical kernel on a pristine/known-safe system and run the sha256sum /sys/kernel/selinux/policy there to get the expected hash. Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-01-14 22:15:22 +03:00
*
selinux: measure state and policy capabilities SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-12 19:37:09 +03:00
* @state: selinux_state
selinux: include a consumer of the new IMA critical data hook SELinux stores the active policy in memory, so the changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring in-memory SELinux policy through IMA subsystem provides a secure way for the attestation service to remotely validate the policy contents at runtime. Measure the hash of the loaded policy by calling the IMA hook ima_measure_critical_data(). Since the size of the loaded policy can be large (several MB), measure the hash of the policy instead of the entire policy to avoid bloating the IMA log entry. To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.10.0-rc1+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of the hash of SELinux policy: To verify the measured data with the current SELinux policy run the following commands and verify the output hash values match. sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1 grep "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 Note that the actual verification of SELinux policy would require loading the expected policy into an identical kernel on a pristine/known-safe system and run the sha256sum /sys/kernel/selinux/policy there to get the expected hash. Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-01-14 22:15:22 +03:00
*
selinux: measure state and policy capabilities SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-12 19:37:09 +03:00
* On success returns the configuration settings string.
* On error, returns NULL.
selinux: include a consumer of the new IMA critical data hook SELinux stores the active policy in memory, so the changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring in-memory SELinux policy through IMA subsystem provides a secure way for the attestation service to remotely validate the policy contents at runtime. Measure the hash of the loaded policy by calling the IMA hook ima_measure_critical_data(). Since the size of the loaded policy can be large (several MB), measure the hash of the policy instead of the entire policy to avoid bloating the IMA log entry. To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.10.0-rc1+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of the hash of SELinux policy: To verify the measured data with the current SELinux policy run the following commands and verify the output hash values match. sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1 grep "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 Note that the actual verification of SELinux policy would require loading the expected policy into an identical kernel on a pristine/known-safe system and run the sha256sum /sys/kernel/selinux/policy there to get the expected hash. Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-01-14 22:15:22 +03:00
*/
selinux: measure state and policy capabilities SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-12 19:37:09 +03:00
static char *selinux_ima_collect_state(struct selinux_state *state)
selinux: include a consumer of the new IMA critical data hook SELinux stores the active policy in memory, so the changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring in-memory SELinux policy through IMA subsystem provides a secure way for the attestation service to remotely validate the policy contents at runtime. Measure the hash of the loaded policy by calling the IMA hook ima_measure_critical_data(). Since the size of the loaded policy can be large (several MB), measure the hash of the policy instead of the entire policy to avoid bloating the IMA log entry. To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.10.0-rc1+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of the hash of SELinux policy: To verify the measured data with the current SELinux policy run the following commands and verify the output hash values match. sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1 grep "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 Note that the actual verification of SELinux policy would require loading the expected policy into an identical kernel on a pristine/known-safe system and run the sha256sum /sys/kernel/selinux/policy there to get the expected hash. Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-01-14 22:15:22 +03:00
{
selinux: measure state and policy capabilities SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-12 19:37:09 +03:00
const char *on = "=1;", *off = "=0;";
char *buf;
int buf_len, len, i, rc;
buf_len = strlen("initialized=0;enforcing=0;checkreqprot=0;") + 1;
len = strlen(on);
for (i = 0; i < __POLICYDB_CAP_MAX; i++)
selinux: measure state and policy capabilities SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-12 19:37:09 +03:00
buf_len += strlen(selinux_policycap_names[i]) + len;
buf = kzalloc(buf_len, GFP_KERNEL);
if (!buf)
return NULL;
rc = strscpy(buf, "initialized", buf_len);
WARN_ON(rc < 0);
rc = strlcat(buf, selinux_initialized(state) ? on : off, buf_len);
WARN_ON(rc >= buf_len);
rc = strlcat(buf, "enforcing", buf_len);
WARN_ON(rc >= buf_len);
rc = strlcat(buf, enforcing_enabled(state) ? on : off, buf_len);
WARN_ON(rc >= buf_len);
rc = strlcat(buf, "checkreqprot", buf_len);
WARN_ON(rc >= buf_len);
rc = strlcat(buf, checkreqprot_get(state) ? on : off, buf_len);
WARN_ON(rc >= buf_len);
for (i = 0; i < __POLICYDB_CAP_MAX; i++) {
selinux: measure state and policy capabilities SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-12 19:37:09 +03:00
rc = strlcat(buf, selinux_policycap_names[i], buf_len);
WARN_ON(rc >= buf_len);
rc = strlcat(buf, state->policycap[i] ? on : off, buf_len);
WARN_ON(rc >= buf_len);
}
return buf;
}
/*
* selinux_ima_measure_state_locked - Measure SELinux state and hash of policy
*
* @state: selinux state struct
*/
void selinux_ima_measure_state_locked(struct selinux_state *state)
{
char *state_str = NULL;
selinux: include a consumer of the new IMA critical data hook SELinux stores the active policy in memory, so the changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring in-memory SELinux policy through IMA subsystem provides a secure way for the attestation service to remotely validate the policy contents at runtime. Measure the hash of the loaded policy by calling the IMA hook ima_measure_critical_data(). Since the size of the loaded policy can be large (several MB), measure the hash of the policy instead of the entire policy to avoid bloating the IMA log entry. To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.10.0-rc1+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of the hash of SELinux policy: To verify the measured data with the current SELinux policy run the following commands and verify the output hash values match. sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1 grep "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 Note that the actual verification of SELinux policy would require loading the expected policy into an identical kernel on a pristine/known-safe system and run the sha256sum /sys/kernel/selinux/policy there to get the expected hash. Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-01-14 22:15:22 +03:00
void *policy = NULL;
size_t policy_len;
int rc = 0;
lockdep_assert_held(&state->policy_mutex);
selinux: measure state and policy capabilities SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-12 19:37:09 +03:00
state_str = selinux_ima_collect_state(state);
if (!state_str) {
pr_err("SELinux: %s: failed to read state.\n", __func__);
return;
}
ima_measure_critical_data("selinux", "selinux-state",
state_str, strlen(state_str), false,
NULL, 0);
selinux: measure state and policy capabilities SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-12 19:37:09 +03:00
kfree(state_str);
selinux: include a consumer of the new IMA critical data hook SELinux stores the active policy in memory, so the changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring in-memory SELinux policy through IMA subsystem provides a secure way for the attestation service to remotely validate the policy contents at runtime. Measure the hash of the loaded policy by calling the IMA hook ima_measure_critical_data(). Since the size of the loaded policy can be large (several MB), measure the hash of the policy instead of the entire policy to avoid bloating the IMA log entry. To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.10.0-rc1+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of the hash of SELinux policy: To verify the measured data with the current SELinux policy run the following commands and verify the output hash values match. sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1 grep "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 Note that the actual verification of SELinux policy would require loading the expected policy into an identical kernel on a pristine/known-safe system and run the sha256sum /sys/kernel/selinux/policy there to get the expected hash. Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-01-14 22:15:22 +03:00
/*
* Measure SELinux policy only after initialization is completed.
*/
if (!selinux_initialized(state))
return;
rc = security_read_state_kernel(state, &policy, &policy_len);
if (rc) {
pr_err("SELinux: %s: failed to read policy %d.\n", __func__, rc);
return;
}
ima_measure_critical_data("selinux", "selinux-policy-hash",
policy, policy_len, true,
NULL, 0);
selinux: include a consumer of the new IMA critical data hook SELinux stores the active policy in memory, so the changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring in-memory SELinux policy through IMA subsystem provides a secure way for the attestation service to remotely validate the policy contents at runtime. Measure the hash of the loaded policy by calling the IMA hook ima_measure_critical_data(). Since the size of the loaded policy can be large (several MB), measure the hash of the policy instead of the entire policy to avoid bloating the IMA log entry. To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.10.0-rc1+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of the hash of SELinux policy: To verify the measured data with the current SELinux policy run the following commands and verify the output hash values match. sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1 grep "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 Note that the actual verification of SELinux policy would require loading the expected policy into an identical kernel on a pristine/known-safe system and run the sha256sum /sys/kernel/selinux/policy there to get the expected hash. Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-01-14 22:15:22 +03:00
vfree(policy);
}
selinux: measure state and policy capabilities SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-12 19:37:09 +03:00
/*
* selinux_ima_measure_state - Measure SELinux state and hash of policy
*
* @state: selinux state struct
*/
void selinux_ima_measure_state(struct selinux_state *state)
{
lockdep_assert_not_held(&state->policy_mutex);
selinux: measure state and policy capabilities SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-12 19:37:09 +03:00
mutex_lock(&state->policy_mutex);
selinux_ima_measure_state_locked(state);
mutex_unlock(&state->policy_mutex);
}