WSL2-Linux-Kernel/arch/powerpc/platforms/52xx/mpc52xx_pci.c

411 строки
12 KiB
C
Исходник Обычный вид История

/*
* PCI code for the Freescale MPC52xx embedded CPU.
*
* Copyright (C) 2006 Secret Lab Technologies Ltd.
* Grant Likely <grant.likely@secretlab.ca>
* Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#undef DEBUG
#include <asm/pci.h>
#include <asm/mpc52xx.h>
#include <asm/delay.h>
#include <asm/machdep.h>
#include <linux/kernel.h>
/* ======================================================================== */
/* PCI windows config */
/* ======================================================================== */
#define MPC52xx_PCI_TARGET_IO 0xf0000000
#define MPC52xx_PCI_TARGET_MEM 0x00000000
/* ======================================================================== */
/* Structures mapping & Defines for PCI Unit */
/* ======================================================================== */
#define MPC52xx_PCI_GSCR_BM 0x40000000
#define MPC52xx_PCI_GSCR_PE 0x20000000
#define MPC52xx_PCI_GSCR_SE 0x10000000
#define MPC52xx_PCI_GSCR_XLB2PCI_MASK 0x07000000
#define MPC52xx_PCI_GSCR_XLB2PCI_SHIFT 24
#define MPC52xx_PCI_GSCR_IPG2PCI_MASK 0x00070000
#define MPC52xx_PCI_GSCR_IPG2PCI_SHIFT 16
#define MPC52xx_PCI_GSCR_BME 0x00004000
#define MPC52xx_PCI_GSCR_PEE 0x00002000
#define MPC52xx_PCI_GSCR_SEE 0x00001000
#define MPC52xx_PCI_GSCR_PR 0x00000001
#define MPC52xx_PCI_IWBTAR_TRANSLATION(proc_ad,pci_ad,size) \
( ( (proc_ad) & 0xff000000 ) | \
( (((size) - 1) >> 8) & 0x00ff0000 ) | \
( ((pci_ad) >> 16) & 0x0000ff00 ) )
#define MPC52xx_PCI_IWCR_PACK(win0,win1,win2) (((win0) << 24) | \
((win1) << 16) | \
((win2) << 8))
#define MPC52xx_PCI_IWCR_DISABLE 0x0
#define MPC52xx_PCI_IWCR_ENABLE 0x1
#define MPC52xx_PCI_IWCR_READ 0x0
#define MPC52xx_PCI_IWCR_READ_LINE 0x2
#define MPC52xx_PCI_IWCR_READ_MULTI 0x4
#define MPC52xx_PCI_IWCR_MEM 0x0
#define MPC52xx_PCI_IWCR_IO 0x8
#define MPC52xx_PCI_TCR_P 0x01000000
#define MPC52xx_PCI_TCR_LD 0x00010000
#define MPC52xx_PCI_TBATR_DISABLE 0x0
#define MPC52xx_PCI_TBATR_ENABLE 0x1
struct mpc52xx_pci {
u32 idr; /* PCI + 0x00 */
u32 scr; /* PCI + 0x04 */
u32 ccrir; /* PCI + 0x08 */
u32 cr1; /* PCI + 0x0C */
u32 bar0; /* PCI + 0x10 */
u32 bar1; /* PCI + 0x14 */
u8 reserved1[16]; /* PCI + 0x18 */
u32 ccpr; /* PCI + 0x28 */
u32 sid; /* PCI + 0x2C */
u32 erbar; /* PCI + 0x30 */
u32 cpr; /* PCI + 0x34 */
u8 reserved2[4]; /* PCI + 0x38 */
u32 cr2; /* PCI + 0x3C */
u8 reserved3[32]; /* PCI + 0x40 */
u32 gscr; /* PCI + 0x60 */
u32 tbatr0; /* PCI + 0x64 */
u32 tbatr1; /* PCI + 0x68 */
u32 tcr; /* PCI + 0x6C */
u32 iw0btar; /* PCI + 0x70 */
u32 iw1btar; /* PCI + 0x74 */
u32 iw2btar; /* PCI + 0x78 */
u8 reserved4[4]; /* PCI + 0x7C */
u32 iwcr; /* PCI + 0x80 */
u32 icr; /* PCI + 0x84 */
u32 isr; /* PCI + 0x88 */
u32 arb; /* PCI + 0x8C */
u8 reserved5[104]; /* PCI + 0x90 */
u32 car; /* PCI + 0xF8 */
u8 reserved6[4]; /* PCI + 0xFC */
};
/* ======================================================================== */
/* PCI configuration acess */
/* ======================================================================== */
static int
mpc52xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 *val)
{
struct pci_controller *hose = bus->sysdata;
u32 value;
if (ppc_md.pci_exclude_device)
if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
return PCIBIOS_DEVICE_NOT_FOUND;
out_be32(hose->cfg_addr,
(1 << 31) |
(bus->number << 16) |
(devfn << 8) |
(offset & 0xfc));
mb();
#if defined(CONFIG_PPC_MPC5200_BUGFIX)
if (bus->number) {
/* workaround for the bug 435 of the MPC5200 (L25R);
* Don't do 32 bits config access during type-1 cycles */
switch (len) {
case 1:
value = in_8(((u8 __iomem *)hose->cfg_data) +
(offset & 3));
break;
case 2:
value = in_le16(((u16 __iomem *)hose->cfg_data) +
((offset>>1) & 1));
break;
default:
value = in_le16((u16 __iomem *)hose->cfg_data) |
(in_le16(((u16 __iomem *)hose->cfg_data) + 1) << 16);
break;
}
}
else
#endif
{
value = in_le32(hose->cfg_data);
if (len != 4) {
value >>= ((offset & 0x3) << 3);
value &= 0xffffffff >> (32 - (len << 3));
}
}
*val = value;
out_be32(hose->cfg_addr, 0);
mb();
return PCIBIOS_SUCCESSFUL;
}
static int
mpc52xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
int offset, int len, u32 val)
{
struct pci_controller *hose = bus->sysdata;
u32 value, mask;
if (ppc_md.pci_exclude_device)
if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
return PCIBIOS_DEVICE_NOT_FOUND;
out_be32(hose->cfg_addr,
(1 << 31) |
(bus->number << 16) |
(devfn << 8) |
(offset & 0xfc));
mb();
#if defined(CONFIG_PPC_MPC5200_BUGFIX)
if (bus->number) {
/* workaround for the bug 435 of the MPC5200 (L25R);
* Don't do 32 bits config access during type-1 cycles */
switch (len) {
case 1:
out_8(((u8 __iomem *)hose->cfg_data) +
(offset & 3), val);
break;
case 2:
out_le16(((u16 __iomem *)hose->cfg_data) +
((offset>>1) & 1), val);
break;
default:
out_le16((u16 __iomem *)hose->cfg_data,
(u16)val);
out_le16(((u16 __iomem *)hose->cfg_data) + 1,
(u16)(val>>16));
break;
}
}
else
#endif
{
if (len != 4) {
value = in_le32(hose->cfg_data);
offset = (offset & 0x3) << 3;
mask = (0xffffffff >> (32 - (len << 3)));
mask <<= offset;
value &= ~mask;
val = value | ((val << offset) & mask);
}
out_le32(hose->cfg_data, val);
}
mb();
out_be32(hose->cfg_addr, 0);
mb();
return PCIBIOS_SUCCESSFUL;
}
static struct pci_ops mpc52xx_pci_ops = {
.read = mpc52xx_pci_read_config,
.write = mpc52xx_pci_write_config
};
/* ======================================================================== */
/* PCI setup */
/* ======================================================================== */
static void __init
mpc52xx_pci_setup(struct pci_controller *hose,
struct mpc52xx_pci __iomem *pci_regs)
{
struct resource *res;
u32 tmp;
int iwcr0 = 0, iwcr1 = 0, iwcr2 = 0;
pr_debug("mpc52xx_pci_setup(hose=%p, pci_regs=%p)\n", hose, pci_regs);
/* pci_process_bridge_OF_ranges() found all our addresses for us;
* now store them in the right places */
hose->cfg_addr = &pci_regs->car;
hose->cfg_data = hose->io_base_virt;
/* Control regs */
tmp = in_be32(&pci_regs->scr);
tmp |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
out_be32(&pci_regs->scr, tmp);
/* Memory windows */
res = &hose->mem_resources[0];
if (res->flags) {
pr_debug("mem_resource[0] = {.start=%x, .end=%x, .flags=%lx}\n",
res->start, res->end, res->flags);
out_be32(&pci_regs->iw0btar,
MPC52xx_PCI_IWBTAR_TRANSLATION(res->start, res->start,
res->end - res->start + 1));
iwcr0 = MPC52xx_PCI_IWCR_ENABLE | MPC52xx_PCI_IWCR_MEM;
if (res->flags & IORESOURCE_PREFETCH)
iwcr0 |= MPC52xx_PCI_IWCR_READ_MULTI;
else
iwcr0 |= MPC52xx_PCI_IWCR_READ;
}
res = &hose->mem_resources[1];
if (res->flags) {
pr_debug("mem_resource[1] = {.start=%x, .end=%x, .flags=%lx}\n",
res->start, res->end, res->flags);
out_be32(&pci_regs->iw1btar,
MPC52xx_PCI_IWBTAR_TRANSLATION(res->start, res->start,
res->end - res->start + 1));
iwcr1 = MPC52xx_PCI_IWCR_ENABLE | MPC52xx_PCI_IWCR_MEM;
if (res->flags & IORESOURCE_PREFETCH)
iwcr1 |= MPC52xx_PCI_IWCR_READ_MULTI;
else
iwcr1 |= MPC52xx_PCI_IWCR_READ;
}
/* IO resources */
res = &hose->io_resource;
if (!res) {
printk(KERN_ERR "%s: Didn't find IO resources\n", __FILE__);
return;
}
pr_debug(".io_resource={.start=%x,.end=%x,.flags=%lx} "
".io_base_phys=0x%p\n",
res->start, res->end, res->flags, (void*)hose->io_base_phys);
out_be32(&pci_regs->iw2btar,
MPC52xx_PCI_IWBTAR_TRANSLATION(hose->io_base_phys,
res->start,
res->end - res->start + 1));
iwcr2 = MPC52xx_PCI_IWCR_ENABLE | MPC52xx_PCI_IWCR_IO;
/* Set all the IWCR fields at once; they're in the same reg */
out_be32(&pci_regs->iwcr, MPC52xx_PCI_IWCR_PACK(iwcr0, iwcr1, iwcr2));
out_be32(&pci_regs->tbatr0,
MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_IO );
out_be32(&pci_regs->tbatr1,
MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_MEM );
out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD);
tmp = in_be32(&pci_regs->gscr);
#if 0
/* Reset the exteral bus ( internal PCI controller is NOT resetted ) */
/* Not necessary and can be a bad thing if for example the bootloader
is displaying a splash screen or ... Just left here for
documentation purpose if anyone need it */
out_be32(&pci_regs->gscr, tmp | MPC52xx_PCI_GSCR_PR);
udelay(50);
#endif
/* Make sure the PCI bridge is out of reset */
out_be32(&pci_regs->gscr, tmp & ~MPC52xx_PCI_GSCR_PR);
}
static void
mpc52xx_pci_fixup_resources(struct pci_dev *dev)
{
int i;
pr_debug("mpc52xx_pci_fixup_resources() %.4x:%.4x\n",
dev->vendor, dev->device);
/* We don't rely on boot loader for PCI and resets all
devices */
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
struct resource *res = &dev->resource[i];
if (res->end > res->start) { /* Only valid resources */
res->end -= res->start;
res->start = 0;
res->flags |= IORESOURCE_UNSET;
}
}
/* The PCI Host bridge of MPC52xx has a prefetch memory resource
fixed to 1Gb. Doesn't fit in the resource system so we remove it */
if ( (dev->vendor == PCI_VENDOR_ID_MOTOROLA) &&
( dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200
|| dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200B) ) {
struct resource *res = &dev->resource[1];
res->start = res->end = res->flags = 0;
}
}
int __init
mpc52xx_add_bridge(struct device_node *node)
{
int len;
struct mpc52xx_pci __iomem *pci_regs;
struct pci_controller *hose;
const int *bus_range;
struct resource rsrc;
pr_debug("Adding MPC52xx PCI host bridge %s\n", node->full_name);
pci_assign_all_buses = 1;
if (of_address_to_resource(node, 0, &rsrc) != 0) {
printk(KERN_ERR "Can't get %s resources\n", node->full_name);
return -EINVAL;
}
bus_range = of_get_property(node, "bus-range", &len);
if (bus_range == NULL || len < 2 * sizeof(int)) {
printk(KERN_WARNING "Can't get %s bus-range, assume bus 0\n",
node->full_name);
bus_range = NULL;
}
/* There are some PCI quirks on the 52xx, register the hook to
* fix them. */
ppc_md.pcibios_fixup_resources = mpc52xx_pci_fixup_resources;
/* Alloc and initialize the pci controller. Values in the device
* tree are needed to configure the 52xx PCI controller. Rather
* than parse the tree here, let pci_process_bridge_OF_ranges()
* do it for us and extract the values after the fact */
hose = pcibios_alloc_controller();
if (!hose)
return -ENOMEM;
hose->arch_data = node;
hose->first_busno = bus_range ? bus_range[0] : 0;
hose->last_busno = bus_range ? bus_range[1] : 0xff;
hose->ops = &mpc52xx_pci_ops;
pci_regs = ioremap(rsrc.start, rsrc.end - rsrc.start + 1);
if (!pci_regs)
return -ENOMEM;
pci_process_bridge_OF_ranges(hose, node, 1);
/* Finish setting up PCI using values obtained by
* pci_proces_bridge_OF_ranges */
mpc52xx_pci_setup(hose, pci_regs);
return 0;
}