WSL2-Linux-Kernel/init/initramfs.c

681 строка
14 KiB
C
Исходник Обычный вид История

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 17:07:57 +03:00
// SPDX-License-Identifier: GPL-2.0
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/fcntl.h>
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/dirent.h>
#include <linux/syscalls.h>
initramfs: add option to preserve mtime from initramfs cpio images When unpacking the cpio into the initramfs, mtimes are not preserved by default. This patch adds an INITRAMFS_PRESERVE_MTIME option that allows mtimes stored in the cpio image to be used when constructing the initramfs. For embedded applications that run exclusively out of the initramfs, this is invaluable: When building embedded application initramfs images, its nice to know when the files were actually created during the build process - that makes it easier to see what files were modified when so we can compare the files that are being used on the image with the files used during the build process. This might help (for example) to determine if the target system has all the updated files you expect to see w/o having to check MD5s etc. In our environment, the whole system runs off the initramfs partition, and seeing the modified times of the shared libraries (for example) helps us find bugs that may have been introduced by the build system incorrectly propogating outdated shared libraries into the image. Similarly, many of the initializion/configuration files in /etc might be dynamically built by the build system, and knowing when they were modified helps us sanity check whether the target system has the "latest" files etc. Finally, we might use last modified times to determine whether a hot fix should be applied or not to the running ramfs. Signed-off-by: Nye Liu <nyet@nyet.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 09:01:40 +04:00
#include <linux/utime.h>
#include <linux/file.h>
static ssize_t __init xwrite(int fd, const char *p, size_t count)
{
ssize_t out = 0;
/* sys_write only can write MAX_RW_COUNT aka 2G-4K bytes at most */
while (count) {
ssize_t rv = ksys_write(fd, p, count);
if (rv < 0) {
if (rv == -EINTR || rv == -EAGAIN)
continue;
return out ? out : rv;
} else if (rv == 0)
break;
p += rv;
out += rv;
count -= rv;
}
return out;
}
static __initdata char *message;
static void __init error(char *x)
{
if (!message)
message = x;
}
/* link hash */
#define N_ALIGN(len) ((((len) + 1) & ~3) + 2)
static __initdata struct hash {
int ino, minor, major;
umode_t mode;
struct hash *next;
char name[N_ALIGN(PATH_MAX)];
} *head[32];
static inline int hash(int major, int minor, int ino)
{
unsigned long tmp = ino + minor + (major << 3);
tmp += tmp >> 5;
return tmp & 31;
}
static char __init *find_link(int major, int minor, int ino,
umode_t mode, char *name)
{
struct hash **p, *q;
for (p = head + hash(major, minor, ino); *p; p = &(*p)->next) {
if ((*p)->ino != ino)
continue;
if ((*p)->minor != minor)
continue;
if ((*p)->major != major)
continue;
if (((*p)->mode ^ mode) & S_IFMT)
continue;
return (*p)->name;
}
q = kmalloc(sizeof(struct hash), GFP_KERNEL);
if (!q)
panic("can't allocate link hash entry");
q->major = major;
q->minor = minor;
q->ino = ino;
q->mode = mode;
strcpy(q->name, name);
q->next = NULL;
*p = q;
return NULL;
}
static void __init free_hash(void)
{
struct hash **p, *q;
for (p = head; p < head + 32; p++) {
while (*p) {
q = *p;
*p = q->next;
kfree(q);
}
}
}
static long __init do_utime(char *filename, time64_t mtime)
initramfs: add option to preserve mtime from initramfs cpio images When unpacking the cpio into the initramfs, mtimes are not preserved by default. This patch adds an INITRAMFS_PRESERVE_MTIME option that allows mtimes stored in the cpio image to be used when constructing the initramfs. For embedded applications that run exclusively out of the initramfs, this is invaluable: When building embedded application initramfs images, its nice to know when the files were actually created during the build process - that makes it easier to see what files were modified when so we can compare the files that are being used on the image with the files used during the build process. This might help (for example) to determine if the target system has all the updated files you expect to see w/o having to check MD5s etc. In our environment, the whole system runs off the initramfs partition, and seeing the modified times of the shared libraries (for example) helps us find bugs that may have been introduced by the build system incorrectly propogating outdated shared libraries into the image. Similarly, many of the initializion/configuration files in /etc might be dynamically built by the build system, and knowing when they were modified helps us sanity check whether the target system has the "latest" files etc. Finally, we might use last modified times to determine whether a hot fix should be applied or not to the running ramfs. Signed-off-by: Nye Liu <nyet@nyet.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 09:01:40 +04:00
{
struct timespec64 t[2];
initramfs: add option to preserve mtime from initramfs cpio images When unpacking the cpio into the initramfs, mtimes are not preserved by default. This patch adds an INITRAMFS_PRESERVE_MTIME option that allows mtimes stored in the cpio image to be used when constructing the initramfs. For embedded applications that run exclusively out of the initramfs, this is invaluable: When building embedded application initramfs images, its nice to know when the files were actually created during the build process - that makes it easier to see what files were modified when so we can compare the files that are being used on the image with the files used during the build process. This might help (for example) to determine if the target system has all the updated files you expect to see w/o having to check MD5s etc. In our environment, the whole system runs off the initramfs partition, and seeing the modified times of the shared libraries (for example) helps us find bugs that may have been introduced by the build system incorrectly propogating outdated shared libraries into the image. Similarly, many of the initializion/configuration files in /etc might be dynamically built by the build system, and knowing when they were modified helps us sanity check whether the target system has the "latest" files etc. Finally, we might use last modified times to determine whether a hot fix should be applied or not to the running ramfs. Signed-off-by: Nye Liu <nyet@nyet.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 09:01:40 +04:00
t[0].tv_sec = mtime;
t[0].tv_nsec = 0;
t[1].tv_sec = mtime;
t[1].tv_nsec = 0;
return do_utimes(AT_FDCWD, filename, t, AT_SYMLINK_NOFOLLOW);
}
static __initdata LIST_HEAD(dir_list);
struct dir_entry {
struct list_head list;
char *name;
time64_t mtime;
initramfs: add option to preserve mtime from initramfs cpio images When unpacking the cpio into the initramfs, mtimes are not preserved by default. This patch adds an INITRAMFS_PRESERVE_MTIME option that allows mtimes stored in the cpio image to be used when constructing the initramfs. For embedded applications that run exclusively out of the initramfs, this is invaluable: When building embedded application initramfs images, its nice to know when the files were actually created during the build process - that makes it easier to see what files were modified when so we can compare the files that are being used on the image with the files used during the build process. This might help (for example) to determine if the target system has all the updated files you expect to see w/o having to check MD5s etc. In our environment, the whole system runs off the initramfs partition, and seeing the modified times of the shared libraries (for example) helps us find bugs that may have been introduced by the build system incorrectly propogating outdated shared libraries into the image. Similarly, many of the initializion/configuration files in /etc might be dynamically built by the build system, and knowing when they were modified helps us sanity check whether the target system has the "latest" files etc. Finally, we might use last modified times to determine whether a hot fix should be applied or not to the running ramfs. Signed-off-by: Nye Liu <nyet@nyet.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 09:01:40 +04:00
};
static void __init dir_add(const char *name, time64_t mtime)
initramfs: add option to preserve mtime from initramfs cpio images When unpacking the cpio into the initramfs, mtimes are not preserved by default. This patch adds an INITRAMFS_PRESERVE_MTIME option that allows mtimes stored in the cpio image to be used when constructing the initramfs. For embedded applications that run exclusively out of the initramfs, this is invaluable: When building embedded application initramfs images, its nice to know when the files were actually created during the build process - that makes it easier to see what files were modified when so we can compare the files that are being used on the image with the files used during the build process. This might help (for example) to determine if the target system has all the updated files you expect to see w/o having to check MD5s etc. In our environment, the whole system runs off the initramfs partition, and seeing the modified times of the shared libraries (for example) helps us find bugs that may have been introduced by the build system incorrectly propogating outdated shared libraries into the image. Similarly, many of the initializion/configuration files in /etc might be dynamically built by the build system, and knowing when they were modified helps us sanity check whether the target system has the "latest" files etc. Finally, we might use last modified times to determine whether a hot fix should be applied or not to the running ramfs. Signed-off-by: Nye Liu <nyet@nyet.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 09:01:40 +04:00
{
struct dir_entry *de = kmalloc(sizeof(struct dir_entry), GFP_KERNEL);
if (!de)
panic("can't allocate dir_entry buffer");
INIT_LIST_HEAD(&de->list);
de->name = kstrdup(name, GFP_KERNEL);
de->mtime = mtime;
list_add(&de->list, &dir_list);
}
static void __init dir_utime(void)
{
struct dir_entry *de, *tmp;
list_for_each_entry_safe(de, tmp, &dir_list, list) {
list_del(&de->list);
do_utime(de->name, de->mtime);
kfree(de->name);
kfree(de);
}
}
static __initdata time64_t mtime;
initramfs: add option to preserve mtime from initramfs cpio images When unpacking the cpio into the initramfs, mtimes are not preserved by default. This patch adds an INITRAMFS_PRESERVE_MTIME option that allows mtimes stored in the cpio image to be used when constructing the initramfs. For embedded applications that run exclusively out of the initramfs, this is invaluable: When building embedded application initramfs images, its nice to know when the files were actually created during the build process - that makes it easier to see what files were modified when so we can compare the files that are being used on the image with the files used during the build process. This might help (for example) to determine if the target system has all the updated files you expect to see w/o having to check MD5s etc. In our environment, the whole system runs off the initramfs partition, and seeing the modified times of the shared libraries (for example) helps us find bugs that may have been introduced by the build system incorrectly propogating outdated shared libraries into the image. Similarly, many of the initializion/configuration files in /etc might be dynamically built by the build system, and knowing when they were modified helps us sanity check whether the target system has the "latest" files etc. Finally, we might use last modified times to determine whether a hot fix should be applied or not to the running ramfs. Signed-off-by: Nye Liu <nyet@nyet.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 09:01:40 +04:00
/* cpio header parsing */
static __initdata unsigned long ino, major, minor, nlink;
static __initdata umode_t mode;
static __initdata unsigned long body_len, name_len;
static __initdata uid_t uid;
static __initdata gid_t gid;
static __initdata unsigned rdev;
static void __init parse_header(char *s)
{
unsigned long parsed[12];
char buf[9];
int i;
buf[8] = '\0';
for (i = 0, s += 6; i < 12; i++, s += 8) {
memcpy(buf, s, 8);
parsed[i] = simple_strtoul(buf, NULL, 16);
}
ino = parsed[0];
mode = parsed[1];
uid = parsed[2];
gid = parsed[3];
nlink = parsed[4];
mtime = parsed[5]; /* breaks in y2106 */
body_len = parsed[6];
major = parsed[7];
minor = parsed[8];
rdev = new_encode_dev(MKDEV(parsed[9], parsed[10]));
name_len = parsed[11];
}
/* FSM */
static __initdata enum state {
Start,
Collect,
GotHeader,
SkipIt,
GotName,
CopyFile,
GotSymlink,
Reset
} state, next_state;
static __initdata char *victim;
static unsigned long byte_count __initdata;
static __initdata loff_t this_header, next_header;
static inline void __init eat(unsigned n)
{
victim += n;
this_header += n;
byte_count -= n;
}
initramfs: add option to preserve mtime from initramfs cpio images When unpacking the cpio into the initramfs, mtimes are not preserved by default. This patch adds an INITRAMFS_PRESERVE_MTIME option that allows mtimes stored in the cpio image to be used when constructing the initramfs. For embedded applications that run exclusively out of the initramfs, this is invaluable: When building embedded application initramfs images, its nice to know when the files were actually created during the build process - that makes it easier to see what files were modified when so we can compare the files that are being used on the image with the files used during the build process. This might help (for example) to determine if the target system has all the updated files you expect to see w/o having to check MD5s etc. In our environment, the whole system runs off the initramfs partition, and seeing the modified times of the shared libraries (for example) helps us find bugs that may have been introduced by the build system incorrectly propogating outdated shared libraries into the image. Similarly, many of the initializion/configuration files in /etc might be dynamically built by the build system, and knowing when they were modified helps us sanity check whether the target system has the "latest" files etc. Finally, we might use last modified times to determine whether a hot fix should be applied or not to the running ramfs. Signed-off-by: Nye Liu <nyet@nyet.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 09:01:40 +04:00
static __initdata char *vcollected;
static __initdata char *collected;
initramfs: support initramfs that is bigger than 2GiB Now with 64bit bzImage and kexec tools, we support ramdisk that size is bigger than 2g, as we could put it above 4G. Found compressed initramfs image could not be decompressed properly. It turns out that image length is int during decompress detection, and it will become < 0 when length is more than 2G. Furthermore, during decompressing len as int is used for inbuf count, that has problem too. Change len to long, that should be ok as on 32 bit platform long is 32bits. Tested with following compressed initramfs image as root with kexec. gzip, bzip2, xz, lzma, lzop, lz4. run time for populate_rootfs(): size name Nehalem-EX Westmere-EX Ivybridge-EX 9034400256 root_img : 26s 24s 30s 3561095057 root_img.lz4 : 28s 27s 27s 3459554629 root_img.lzo : 29s 29s 28s 3219399480 root_img.gz : 64s 62s 49s 2251594592 root_img.xz : 262s 260s 183s 2226366598 root_img.lzma: 386s 376s 277s 2901482513 root_img.bz2 : 635s 599s Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Rashika Kheria <rashika.kheria@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: P J P <ppandit@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: "Daniel M. Weeks" <dan@danweeks.net> Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: Jan Beulich <JBeulich@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 01:23:14 +04:00
static long remains __initdata;
static __initdata char *collect;
static void __init read_into(char *buf, unsigned size, enum state next)
{
if (byte_count >= size) {
collected = victim;
eat(size);
state = next;
} else {
collect = collected = buf;
remains = size;
next_state = next;
state = Collect;
}
}
static __initdata char *header_buf, *symlink_buf, *name_buf;
static int __init do_start(void)
{
read_into(header_buf, 110, GotHeader);
return 0;
}
static int __init do_collect(void)
{
initramfs: support initramfs that is bigger than 2GiB Now with 64bit bzImage and kexec tools, we support ramdisk that size is bigger than 2g, as we could put it above 4G. Found compressed initramfs image could not be decompressed properly. It turns out that image length is int during decompress detection, and it will become < 0 when length is more than 2G. Furthermore, during decompressing len as int is used for inbuf count, that has problem too. Change len to long, that should be ok as on 32 bit platform long is 32bits. Tested with following compressed initramfs image as root with kexec. gzip, bzip2, xz, lzma, lzop, lz4. run time for populate_rootfs(): size name Nehalem-EX Westmere-EX Ivybridge-EX 9034400256 root_img : 26s 24s 30s 3561095057 root_img.lz4 : 28s 27s 27s 3459554629 root_img.lzo : 29s 29s 28s 3219399480 root_img.gz : 64s 62s 49s 2251594592 root_img.xz : 262s 260s 183s 2226366598 root_img.lzma: 386s 376s 277s 2901482513 root_img.bz2 : 635s 599s Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Rashika Kheria <rashika.kheria@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: P J P <ppandit@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: "Daniel M. Weeks" <dan@danweeks.net> Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: Jan Beulich <JBeulich@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 01:23:14 +04:00
unsigned long n = remains;
if (byte_count < n)
n = byte_count;
memcpy(collect, victim, n);
eat(n);
collect += n;
if ((remains -= n) != 0)
return 1;
state = next_state;
return 0;
}
static int __init do_header(void)
{
if (memcmp(collected, "070707", 6)==0) {
error("incorrect cpio method used: use -H newc option");
return 1;
}
if (memcmp(collected, "070701", 6)) {
error("no cpio magic");
return 1;
}
parse_header(collected);
next_header = this_header + N_ALIGN(name_len) + body_len;
next_header = (next_header + 3) & ~3;
state = SkipIt;
if (name_len <= 0 || name_len > PATH_MAX)
return 0;
if (S_ISLNK(mode)) {
if (body_len > PATH_MAX)
return 0;
collect = collected = symlink_buf;
remains = N_ALIGN(name_len) + body_len;
next_state = GotSymlink;
state = Collect;
return 0;
}
if (S_ISREG(mode) || !body_len)
read_into(name_buf, N_ALIGN(name_len), GotName);
return 0;
}
static int __init do_skip(void)
{
if (this_header + byte_count < next_header) {
eat(byte_count);
return 1;
} else {
eat(next_header - this_header);
state = next_state;
return 0;
}
}
static int __init do_reset(void)
{
while (byte_count && *victim == '\0')
eat(1);
if (byte_count && (this_header & 3))
error("broken padding");
return 1;
}
static void __init clean_path(char *path, umode_t fmode)
{
struct kstat st;
if (!vfs_lstat(path, &st) && (st.mode ^ fmode) & S_IFMT) {
if (S_ISDIR(st.mode))
ksys_rmdir(path);
else
ksys_unlink(path);
}
}
initramfs: clean old path before creating a hardlink sys_link() can fail due to the new path already existing. This case ofen occurs when we use a concated initrd, for example: 1) prepare a basic rootfs, it contains a regular files rc.local lizhijian@:~/yocto-tiny-i386-2016-04-22$ cat etc/rc.local #!/bin/sh echo "Running /etc/rc.local..." yocto-tiny-i386-2016-04-22$ find . | sed 's,^\./,,' | cpio -o -H newc | gzip -n -9 >../rootfs.cgz 2) create a extra initrd which also includes a etc/rc.local lizhijian@:~/lkp-x86_64/etc$ echo "append initrd" >rc.local lizhijian@:~/lkp/lkp-x86_64/etc$ cat rc.local append initrd lizhijian@:~/lkp/lkp-x86_64/etc$ ln rc.local rc.local.hardlink append initrd lizhijian@:~/lkp/lkp-x86_64/etc$ stat rc.local rc.local.hardlink File: 'rc.local' Size: 14 Blocks: 8 IO Block: 4096 regular file Device: 801h/2049d Inode: 11296086 Links: 2 Access: (0664/-rw-rw-r--) Uid: ( 1002/lizhijian) Gid: ( 1002/lizhijian) Access: 2018-11-15 16:08:28.654464815 +0800 Modify: 2018-11-15 16:07:57.514903210 +0800 Change: 2018-11-15 16:08:24.180228872 +0800 Birth: - File: 'rc.local.hardlink' Size: 14 Blocks: 8 IO Block: 4096 regular file Device: 801h/2049d Inode: 11296086 Links: 2 Access: (0664/-rw-rw-r--) Uid: ( 1002/lizhijian) Gid: ( 1002/lizhijian) Access: 2018-11-15 16:08:28.654464815 +0800 Modify: 2018-11-15 16:07:57.514903210 +0800 Change: 2018-11-15 16:08:24.180228872 +0800 Birth: - lizhijian@:~/lkp/lkp-x86_64$ find . | sed 's,^\./,,' | cpio -o -H newc | gzip -n -9 >../rc-local.cgz lizhijian@:~/lkp/lkp-x86_64$ gzip -dc ../rc-local.cgz | cpio -t . etc etc/rc.local.hardlink <<< it will be extracted first at this initrd etc/rc.local 3) concate 2 initrds and boot lizhijian@:~/lkp$ cat rootfs.cgz rc-local.cgz >concate-initrd.cgz lizhijian@:~/lkp$ qemu-system-x86_64 -nographic -enable-kvm -cpu host -smp 1 -m 1024 -kernel ~/lkp/linux/arch/x86/boot/bzImage -append "console=ttyS0 earlyprint=ttyS0 ignore_loglevel" -initrd ./concate-initr.cgz -serial stdio -nodefaults In this case, sys_link(2) will fail and return -EEXIST, so we can only get the rc.local at rootfs.cgz instead of rc-local.cgz [akpm@linux-foundation.org: move code to avoid forward declaration] Link: http://lkml.kernel.org/r/1542352368-13299-1-git-send-email-lizhijian@cn.fujitsu.com Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Cc: Philip Li <philip.li@intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Li Zhijian <zhijianx.li@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-01 01:10:09 +03:00
static int __init maybe_link(void)
{
if (nlink >= 2) {
char *old = find_link(major, minor, ino, mode, collected);
if (old) {
clean_path(collected, 0);
return (ksys_link(old, collected) < 0) ? -1 : 1;
}
}
return 0;
}
static __initdata int wfd;
static int __init do_name(void)
{
state = SkipIt;
next_state = Reset;
if (strcmp(collected, "TRAILER!!!") == 0) {
free_hash();
return 0;
}
clean_path(collected, mode);
if (S_ISREG(mode)) {
int ml = maybe_link();
if (ml >= 0) {
int openflags = O_WRONLY|O_CREAT;
if (ml != 1)
openflags |= O_TRUNC;
wfd = ksys_open(collected, openflags, mode);
if (wfd >= 0) {
ksys_fchown(wfd, uid, gid);
ksys_fchmod(wfd, mode);
if (body_len)
ksys_ftruncate(wfd, body_len);
initramfs: add option to preserve mtime from initramfs cpio images When unpacking the cpio into the initramfs, mtimes are not preserved by default. This patch adds an INITRAMFS_PRESERVE_MTIME option that allows mtimes stored in the cpio image to be used when constructing the initramfs. For embedded applications that run exclusively out of the initramfs, this is invaluable: When building embedded application initramfs images, its nice to know when the files were actually created during the build process - that makes it easier to see what files were modified when so we can compare the files that are being used on the image with the files used during the build process. This might help (for example) to determine if the target system has all the updated files you expect to see w/o having to check MD5s etc. In our environment, the whole system runs off the initramfs partition, and seeing the modified times of the shared libraries (for example) helps us find bugs that may have been introduced by the build system incorrectly propogating outdated shared libraries into the image. Similarly, many of the initializion/configuration files in /etc might be dynamically built by the build system, and knowing when they were modified helps us sanity check whether the target system has the "latest" files etc. Finally, we might use last modified times to determine whether a hot fix should be applied or not to the running ramfs. Signed-off-by: Nye Liu <nyet@nyet.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 09:01:40 +04:00
vcollected = kstrdup(collected, GFP_KERNEL);
state = CopyFile;
}
}
} else if (S_ISDIR(mode)) {
ksys_mkdir(collected, mode);
ksys_chown(collected, uid, gid);
ksys_chmod(collected, mode);
initramfs: add option to preserve mtime from initramfs cpio images When unpacking the cpio into the initramfs, mtimes are not preserved by default. This patch adds an INITRAMFS_PRESERVE_MTIME option that allows mtimes stored in the cpio image to be used when constructing the initramfs. For embedded applications that run exclusively out of the initramfs, this is invaluable: When building embedded application initramfs images, its nice to know when the files were actually created during the build process - that makes it easier to see what files were modified when so we can compare the files that are being used on the image with the files used during the build process. This might help (for example) to determine if the target system has all the updated files you expect to see w/o having to check MD5s etc. In our environment, the whole system runs off the initramfs partition, and seeing the modified times of the shared libraries (for example) helps us find bugs that may have been introduced by the build system incorrectly propogating outdated shared libraries into the image. Similarly, many of the initializion/configuration files in /etc might be dynamically built by the build system, and knowing when they were modified helps us sanity check whether the target system has the "latest" files etc. Finally, we might use last modified times to determine whether a hot fix should be applied or not to the running ramfs. Signed-off-by: Nye Liu <nyet@nyet.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 09:01:40 +04:00
dir_add(collected, mtime);
} else if (S_ISBLK(mode) || S_ISCHR(mode) ||
S_ISFIFO(mode) || S_ISSOCK(mode)) {
if (maybe_link() == 0) {
ksys_mknod(collected, mode, rdev);
ksys_chown(collected, uid, gid);
ksys_chmod(collected, mode);
initramfs: add option to preserve mtime from initramfs cpio images When unpacking the cpio into the initramfs, mtimes are not preserved by default. This patch adds an INITRAMFS_PRESERVE_MTIME option that allows mtimes stored in the cpio image to be used when constructing the initramfs. For embedded applications that run exclusively out of the initramfs, this is invaluable: When building embedded application initramfs images, its nice to know when the files were actually created during the build process - that makes it easier to see what files were modified when so we can compare the files that are being used on the image with the files used during the build process. This might help (for example) to determine if the target system has all the updated files you expect to see w/o having to check MD5s etc. In our environment, the whole system runs off the initramfs partition, and seeing the modified times of the shared libraries (for example) helps us find bugs that may have been introduced by the build system incorrectly propogating outdated shared libraries into the image. Similarly, many of the initializion/configuration files in /etc might be dynamically built by the build system, and knowing when they were modified helps us sanity check whether the target system has the "latest" files etc. Finally, we might use last modified times to determine whether a hot fix should be applied or not to the running ramfs. Signed-off-by: Nye Liu <nyet@nyet.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 09:01:40 +04:00
do_utime(collected, mtime);
}
}
return 0;
}
static int __init do_copy(void)
{
if (byte_count >= body_len) {
if (xwrite(wfd, victim, body_len) != body_len)
error("write error");
ksys_close(wfd);
initramfs: add option to preserve mtime from initramfs cpio images When unpacking the cpio into the initramfs, mtimes are not preserved by default. This patch adds an INITRAMFS_PRESERVE_MTIME option that allows mtimes stored in the cpio image to be used when constructing the initramfs. For embedded applications that run exclusively out of the initramfs, this is invaluable: When building embedded application initramfs images, its nice to know when the files were actually created during the build process - that makes it easier to see what files were modified when so we can compare the files that are being used on the image with the files used during the build process. This might help (for example) to determine if the target system has all the updated files you expect to see w/o having to check MD5s etc. In our environment, the whole system runs off the initramfs partition, and seeing the modified times of the shared libraries (for example) helps us find bugs that may have been introduced by the build system incorrectly propogating outdated shared libraries into the image. Similarly, many of the initializion/configuration files in /etc might be dynamically built by the build system, and knowing when they were modified helps us sanity check whether the target system has the "latest" files etc. Finally, we might use last modified times to determine whether a hot fix should be applied or not to the running ramfs. Signed-off-by: Nye Liu <nyet@nyet.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 09:01:40 +04:00
do_utime(vcollected, mtime);
kfree(vcollected);
eat(body_len);
state = SkipIt;
return 0;
} else {
if (xwrite(wfd, victim, byte_count) != byte_count)
error("write error");
body_len -= byte_count;
eat(byte_count);
return 1;
}
}
static int __init do_symlink(void)
{
collected[N_ALIGN(name_len) + body_len] = '\0';
clean_path(collected, 0);
ksys_symlink(collected + N_ALIGN(name_len), collected);
ksys_lchown(collected, uid, gid);
initramfs: add option to preserve mtime from initramfs cpio images When unpacking the cpio into the initramfs, mtimes are not preserved by default. This patch adds an INITRAMFS_PRESERVE_MTIME option that allows mtimes stored in the cpio image to be used when constructing the initramfs. For embedded applications that run exclusively out of the initramfs, this is invaluable: When building embedded application initramfs images, its nice to know when the files were actually created during the build process - that makes it easier to see what files were modified when so we can compare the files that are being used on the image with the files used during the build process. This might help (for example) to determine if the target system has all the updated files you expect to see w/o having to check MD5s etc. In our environment, the whole system runs off the initramfs partition, and seeing the modified times of the shared libraries (for example) helps us find bugs that may have been introduced by the build system incorrectly propogating outdated shared libraries into the image. Similarly, many of the initializion/configuration files in /etc might be dynamically built by the build system, and knowing when they were modified helps us sanity check whether the target system has the "latest" files etc. Finally, we might use last modified times to determine whether a hot fix should be applied or not to the running ramfs. Signed-off-by: Nye Liu <nyet@nyet.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 09:01:40 +04:00
do_utime(collected, mtime);
state = SkipIt;
next_state = Reset;
return 0;
}
static __initdata int (*actions[])(void) = {
[Start] = do_start,
[Collect] = do_collect,
[GotHeader] = do_header,
[SkipIt] = do_skip,
[GotName] = do_name,
[CopyFile] = do_copy,
[GotSymlink] = do_symlink,
[Reset] = do_reset,
};
initramfs: support initramfs that is bigger than 2GiB Now with 64bit bzImage and kexec tools, we support ramdisk that size is bigger than 2g, as we could put it above 4G. Found compressed initramfs image could not be decompressed properly. It turns out that image length is int during decompress detection, and it will become < 0 when length is more than 2G. Furthermore, during decompressing len as int is used for inbuf count, that has problem too. Change len to long, that should be ok as on 32 bit platform long is 32bits. Tested with following compressed initramfs image as root with kexec. gzip, bzip2, xz, lzma, lzop, lz4. run time for populate_rootfs(): size name Nehalem-EX Westmere-EX Ivybridge-EX 9034400256 root_img : 26s 24s 30s 3561095057 root_img.lz4 : 28s 27s 27s 3459554629 root_img.lzo : 29s 29s 28s 3219399480 root_img.gz : 64s 62s 49s 2251594592 root_img.xz : 262s 260s 183s 2226366598 root_img.lzma: 386s 376s 277s 2901482513 root_img.bz2 : 635s 599s Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Rashika Kheria <rashika.kheria@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: P J P <ppandit@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: "Daniel M. Weeks" <dan@danweeks.net> Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: Jan Beulich <JBeulich@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 01:23:14 +04:00
static long __init write_buffer(char *buf, unsigned long len)
{
byte_count = len;
victim = buf;
while (!actions[state]())
;
return len - byte_count;
}
initramfs: support initramfs that is bigger than 2GiB Now with 64bit bzImage and kexec tools, we support ramdisk that size is bigger than 2g, as we could put it above 4G. Found compressed initramfs image could not be decompressed properly. It turns out that image length is int during decompress detection, and it will become < 0 when length is more than 2G. Furthermore, during decompressing len as int is used for inbuf count, that has problem too. Change len to long, that should be ok as on 32 bit platform long is 32bits. Tested with following compressed initramfs image as root with kexec. gzip, bzip2, xz, lzma, lzop, lz4. run time for populate_rootfs(): size name Nehalem-EX Westmere-EX Ivybridge-EX 9034400256 root_img : 26s 24s 30s 3561095057 root_img.lz4 : 28s 27s 27s 3459554629 root_img.lzo : 29s 29s 28s 3219399480 root_img.gz : 64s 62s 49s 2251594592 root_img.xz : 262s 260s 183s 2226366598 root_img.lzma: 386s 376s 277s 2901482513 root_img.bz2 : 635s 599s Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Rashika Kheria <rashika.kheria@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: P J P <ppandit@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: "Daniel M. Weeks" <dan@danweeks.net> Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: Jan Beulich <JBeulich@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 01:23:14 +04:00
static long __init flush_buffer(void *bufv, unsigned long len)
{
char *buf = (char *) bufv;
initramfs: support initramfs that is bigger than 2GiB Now with 64bit bzImage and kexec tools, we support ramdisk that size is bigger than 2g, as we could put it above 4G. Found compressed initramfs image could not be decompressed properly. It turns out that image length is int during decompress detection, and it will become < 0 when length is more than 2G. Furthermore, during decompressing len as int is used for inbuf count, that has problem too. Change len to long, that should be ok as on 32 bit platform long is 32bits. Tested with following compressed initramfs image as root with kexec. gzip, bzip2, xz, lzma, lzop, lz4. run time for populate_rootfs(): size name Nehalem-EX Westmere-EX Ivybridge-EX 9034400256 root_img : 26s 24s 30s 3561095057 root_img.lz4 : 28s 27s 27s 3459554629 root_img.lzo : 29s 29s 28s 3219399480 root_img.gz : 64s 62s 49s 2251594592 root_img.xz : 262s 260s 183s 2226366598 root_img.lzma: 386s 376s 277s 2901482513 root_img.bz2 : 635s 599s Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Rashika Kheria <rashika.kheria@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: P J P <ppandit@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: "Daniel M. Weeks" <dan@danweeks.net> Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: Jan Beulich <JBeulich@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 01:23:14 +04:00
long written;
long origLen = len;
if (message)
return -1;
while ((written = write_buffer(buf, len)) < len && !message) {
char c = buf[written];
if (c == '0') {
buf += written;
len -= written;
state = Start;
} else if (c == 0) {
buf += written;
len -= written;
state = Reset;
} else
error("junk within compressed archive");
}
return origLen;
}
initramfs: support initramfs that is bigger than 2GiB Now with 64bit bzImage and kexec tools, we support ramdisk that size is bigger than 2g, as we could put it above 4G. Found compressed initramfs image could not be decompressed properly. It turns out that image length is int during decompress detection, and it will become < 0 when length is more than 2G. Furthermore, during decompressing len as int is used for inbuf count, that has problem too. Change len to long, that should be ok as on 32 bit platform long is 32bits. Tested with following compressed initramfs image as root with kexec. gzip, bzip2, xz, lzma, lzop, lz4. run time for populate_rootfs(): size name Nehalem-EX Westmere-EX Ivybridge-EX 9034400256 root_img : 26s 24s 30s 3561095057 root_img.lz4 : 28s 27s 27s 3459554629 root_img.lzo : 29s 29s 28s 3219399480 root_img.gz : 64s 62s 49s 2251594592 root_img.xz : 262s 260s 183s 2226366598 root_img.lzma: 386s 376s 277s 2901482513 root_img.bz2 : 635s 599s Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Rashika Kheria <rashika.kheria@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: P J P <ppandit@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: "Daniel M. Weeks" <dan@danweeks.net> Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: Jan Beulich <JBeulich@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 01:23:14 +04:00
static unsigned long my_inptr; /* index of next byte to be processed in inbuf */
#include <linux/decompress/generic.h>
initramfs: support initramfs that is bigger than 2GiB Now with 64bit bzImage and kexec tools, we support ramdisk that size is bigger than 2g, as we could put it above 4G. Found compressed initramfs image could not be decompressed properly. It turns out that image length is int during decompress detection, and it will become < 0 when length is more than 2G. Furthermore, during decompressing len as int is used for inbuf count, that has problem too. Change len to long, that should be ok as on 32 bit platform long is 32bits. Tested with following compressed initramfs image as root with kexec. gzip, bzip2, xz, lzma, lzop, lz4. run time for populate_rootfs(): size name Nehalem-EX Westmere-EX Ivybridge-EX 9034400256 root_img : 26s 24s 30s 3561095057 root_img.lz4 : 28s 27s 27s 3459554629 root_img.lzo : 29s 29s 28s 3219399480 root_img.gz : 64s 62s 49s 2251594592 root_img.xz : 262s 260s 183s 2226366598 root_img.lzma: 386s 376s 277s 2901482513 root_img.bz2 : 635s 599s Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Rashika Kheria <rashika.kheria@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: P J P <ppandit@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: "Daniel M. Weeks" <dan@danweeks.net> Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: Jan Beulich <JBeulich@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 01:23:14 +04:00
static char * __init unpack_to_rootfs(char *buf, unsigned long len)
{
initramfs: support initramfs that is bigger than 2GiB Now with 64bit bzImage and kexec tools, we support ramdisk that size is bigger than 2g, as we could put it above 4G. Found compressed initramfs image could not be decompressed properly. It turns out that image length is int during decompress detection, and it will become < 0 when length is more than 2G. Furthermore, during decompressing len as int is used for inbuf count, that has problem too. Change len to long, that should be ok as on 32 bit platform long is 32bits. Tested with following compressed initramfs image as root with kexec. gzip, bzip2, xz, lzma, lzop, lz4. run time for populate_rootfs(): size name Nehalem-EX Westmere-EX Ivybridge-EX 9034400256 root_img : 26s 24s 30s 3561095057 root_img.lz4 : 28s 27s 27s 3459554629 root_img.lzo : 29s 29s 28s 3219399480 root_img.gz : 64s 62s 49s 2251594592 root_img.xz : 262s 260s 183s 2226366598 root_img.lzma: 386s 376s 277s 2901482513 root_img.bz2 : 635s 599s Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Rashika Kheria <rashika.kheria@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: P J P <ppandit@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: "Daniel M. Weeks" <dan@danweeks.net> Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: Jan Beulich <JBeulich@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 01:23:14 +04:00
long written;
decompress_fn decompress;
const char *compress_name;
static __initdata char msg_buf[64];
header_buf = kmalloc(110, GFP_KERNEL);
symlink_buf = kmalloc(PATH_MAX + N_ALIGN(PATH_MAX) + 1, GFP_KERNEL);
name_buf = kmalloc(N_ALIGN(PATH_MAX), GFP_KERNEL);
if (!header_buf || !symlink_buf || !name_buf)
panic("can't allocate buffers");
state = Start;
this_header = 0;
message = NULL;
while (!message && len) {
loff_t saved_offset = this_header;
if (*buf == '0' && !(this_header & 3)) {
state = Start;
written = write_buffer(buf, len);
buf += written;
len -= written;
continue;
}
if (!*buf) {
buf++;
len--;
this_header++;
continue;
}
this_header = 0;
decompress = decompress_method(buf, len, &compress_name);
pr_debug("Detected %s compressed data\n", compress_name);
if (decompress) {
initramfs: support initramfs that is bigger than 2GiB Now with 64bit bzImage and kexec tools, we support ramdisk that size is bigger than 2g, as we could put it above 4G. Found compressed initramfs image could not be decompressed properly. It turns out that image length is int during decompress detection, and it will become < 0 when length is more than 2G. Furthermore, during decompressing len as int is used for inbuf count, that has problem too. Change len to long, that should be ok as on 32 bit platform long is 32bits. Tested with following compressed initramfs image as root with kexec. gzip, bzip2, xz, lzma, lzop, lz4. run time for populate_rootfs(): size name Nehalem-EX Westmere-EX Ivybridge-EX 9034400256 root_img : 26s 24s 30s 3561095057 root_img.lz4 : 28s 27s 27s 3459554629 root_img.lzo : 29s 29s 28s 3219399480 root_img.gz : 64s 62s 49s 2251594592 root_img.xz : 262s 260s 183s 2226366598 root_img.lzma: 386s 376s 277s 2901482513 root_img.bz2 : 635s 599s Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Rashika Kheria <rashika.kheria@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: P J P <ppandit@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: "Daniel M. Weeks" <dan@danweeks.net> Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: Jan Beulich <JBeulich@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 01:23:14 +04:00
int res = decompress(buf, len, NULL, flush_buffer, NULL,
&my_inptr, error);
if (res)
error("decompressor failed");
} else if (compress_name) {
if (!message) {
snprintf(msg_buf, sizeof msg_buf,
"compression method %s not configured",
compress_name);
message = msg_buf;
}
} else
error("invalid magic at start of compressed archive");
if (state != Reset)
error("junk at the end of compressed archive");
this_header = saved_offset + my_inptr;
buf += my_inptr;
len -= my_inptr;
}
initramfs: add option to preserve mtime from initramfs cpio images When unpacking the cpio into the initramfs, mtimes are not preserved by default. This patch adds an INITRAMFS_PRESERVE_MTIME option that allows mtimes stored in the cpio image to be used when constructing the initramfs. For embedded applications that run exclusively out of the initramfs, this is invaluable: When building embedded application initramfs images, its nice to know when the files were actually created during the build process - that makes it easier to see what files were modified when so we can compare the files that are being used on the image with the files used during the build process. This might help (for example) to determine if the target system has all the updated files you expect to see w/o having to check MD5s etc. In our environment, the whole system runs off the initramfs partition, and seeing the modified times of the shared libraries (for example) helps us find bugs that may have been introduced by the build system incorrectly propogating outdated shared libraries into the image. Similarly, many of the initializion/configuration files in /etc might be dynamically built by the build system, and knowing when they were modified helps us sanity check whether the target system has the "latest" files etc. Finally, we might use last modified times to determine whether a hot fix should be applied or not to the running ramfs. Signed-off-by: Nye Liu <nyet@nyet.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 09:01:40 +04:00
dir_utime();
kfree(name_buf);
kfree(symlink_buf);
kfree(header_buf);
return message;
}
static int __initdata do_retain_initrd;
static int __init retain_initrd_param(char *str)
{
if (*str)
return 0;
do_retain_initrd = 1;
return 1;
}
__setup("retain_initrd", retain_initrd_param);
#ifdef CONFIG_ARCH_HAS_KEEPINITRD
static int __init keepinitrd_setup(char *__unused)
{
do_retain_initrd = 1;
return 1;
}
__setup("keepinitrd", keepinitrd_setup);
#endif
initramfs: fix initramfs size calculation The size of a built-in initramfs is calculated in init/initramfs.c by "__initramfs_end - __initramfs_start". Those symbols are defined in the linker script include/asm-generic/vmlinux.lds.h: #define INIT_RAM_FS \ . = ALIGN(PAGE_SIZE); \ VMLINUX_SYMBOL(__initramfs_start) = .; \ *(.init.ramfs) \ VMLINUX_SYMBOL(__initramfs_end) = .; If the initramfs file has an odd number of bytes, the "__initramfs_end" symbol points to an odd address, for example, the symbols in the System.map might look like: 0000000000572000 T __initramfs_start 00000000005bcd05 T __initramfs_end <-- odd address At least on s390 this causes a problem: Certain s390 instructions, especially instructions for loading addresses (larl) or branch addresses must be on even addresses. The compiler loads the symbol addresses with the "larl" instruction. This instruction sets the last bit to 0 and, therefore, for odd size files, the calculated size is one byte less than it should be: 0000000000540a9c <populate_rootfs>: 540a9c: eb cf f0 78 00 24 stmg %r12,%r15,120(%r15), 540aa2: c0 10 00 01 8a af larl %r1,572000 <__initramfs_start> 540aa8: c0 c0 00 03 e1 2e larl %r12,5bcd04 <initramfs_end> (Instead of 5bcd05) ... 540abe: 1b c1 sr %r12,%r1 To fix the problem, this patch introduces the global variable __initramfs_size, which is calculated in the "usr/initramfs_data.S" file. The populate_rootfs() function can then use the start marker of the .init.ramfs section and the value of __initramfs_size for loading the initramfs. Because the start marker and size is sufficient, the __initramfs_end symbol is no longer needed and is removed. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com> Acked-by: Michal Marek <mmarek@suse.cz> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-09-18 02:24:11 +04:00
extern char __initramfs_start[];
extern unsigned long __initramfs_size;
#include <linux/initrd.h>
#include <linux/kexec.h>
void __weak free_initrd_mem(unsigned long start, unsigned long end)
{
free_reserved_area((void *)start, (void *)end, POISON_FREE_INITMEM,
"initrd");
}
2015-09-10 01:38:55 +03:00
#ifdef CONFIG_KEXEC_CORE
static bool kexec_free_initrd(void)
{
unsigned long crashk_start = (unsigned long)__va(crashk_res.start);
unsigned long crashk_end = (unsigned long)__va(crashk_res.end);
/*
* If the initrd region is overlapped with crashkernel reserved region,
* free only memory that is not part of crashkernel region.
*/
if (initrd_start >= crashk_end || initrd_end <= crashk_start)
return false;
/*
* Initialize initrd memory region since the kexec boot does not do.
*/
memset((void *)initrd_start, 0, initrd_end - initrd_start);
if (initrd_start < crashk_start)
free_initrd_mem(initrd_start, crashk_start);
if (initrd_end > crashk_end)
free_initrd_mem(crashk_end, initrd_end);
return true;
}
#else
static inline bool kexec_free_initrd(void)
{
return false;
}
#endif /* CONFIG_KEXEC_CORE */
#ifdef CONFIG_BLK_DEV_RAM
#define BUF_SIZE 1024
static void __init clean_rootfs(void)
{
int fd;
void *buf;
struct linux_dirent64 *dirp;
int num;
fd = ksys_open("/", O_RDONLY, 0);
WARN_ON(fd < 0);
if (fd < 0)
return;
buf = kzalloc(BUF_SIZE, GFP_KERNEL);
WARN_ON(!buf);
if (!buf) {
ksys_close(fd);
return;
}
dirp = buf;
num = ksys_getdents64(fd, dirp, BUF_SIZE);
while (num > 0) {
while (num > 0) {
struct kstat st;
int ret;
ret = vfs_lstat(dirp->d_name, &st);
WARN_ON_ONCE(ret);
if (!ret) {
if (S_ISDIR(st.mode))
ksys_rmdir(dirp->d_name);
else
ksys_unlink(dirp->d_name);
}
num -= dirp->d_reclen;
dirp = (void *)dirp + dirp->d_reclen;
}
dirp = buf;
memset(buf, 0, BUF_SIZE);
num = ksys_getdents64(fd, dirp, BUF_SIZE);
}
ksys_close(fd);
kfree(buf);
}
#else
static inline void clean_rootfs(void)
{
}
#endif /* CONFIG_BLK_DEV_RAM */
#ifdef CONFIG_BLK_DEV_RAM
static void populate_initrd_image(char *err)
{
ssize_t written;
int fd;
unpack_to_rootfs(__initramfs_start, __initramfs_size);
printk(KERN_INFO "rootfs image is not initramfs (%s); looks like an initrd\n",
err);
fd = ksys_open("/initrd.image", O_WRONLY | O_CREAT, 0700);
if (fd < 0)
return;
written = xwrite(fd, (char *)initrd_start, initrd_end - initrd_start);
if (written != initrd_end - initrd_start)
pr_err("/initrd.image: incomplete write (%zd != %ld)\n",
written, initrd_end - initrd_start);
ksys_close(fd);
}
#else
static void populate_initrd_image(char *err)
{
printk(KERN_EMERG "Initramfs unpacking failed: %s\n", err);
}
#endif /* CONFIG_BLK_DEV_RAM */
static int __init populate_rootfs(void)
{
/* Load the built in initramfs */
initramfs: fix initramfs size calculation The size of a built-in initramfs is calculated in init/initramfs.c by "__initramfs_end - __initramfs_start". Those symbols are defined in the linker script include/asm-generic/vmlinux.lds.h: #define INIT_RAM_FS \ . = ALIGN(PAGE_SIZE); \ VMLINUX_SYMBOL(__initramfs_start) = .; \ *(.init.ramfs) \ VMLINUX_SYMBOL(__initramfs_end) = .; If the initramfs file has an odd number of bytes, the "__initramfs_end" symbol points to an odd address, for example, the symbols in the System.map might look like: 0000000000572000 T __initramfs_start 00000000005bcd05 T __initramfs_end <-- odd address At least on s390 this causes a problem: Certain s390 instructions, especially instructions for loading addresses (larl) or branch addresses must be on even addresses. The compiler loads the symbol addresses with the "larl" instruction. This instruction sets the last bit to 0 and, therefore, for odd size files, the calculated size is one byte less than it should be: 0000000000540a9c <populate_rootfs>: 540a9c: eb cf f0 78 00 24 stmg %r12,%r15,120(%r15), 540aa2: c0 10 00 01 8a af larl %r1,572000 <__initramfs_start> 540aa8: c0 c0 00 03 e1 2e larl %r12,5bcd04 <initramfs_end> (Instead of 5bcd05) ... 540abe: 1b c1 sr %r12,%r1 To fix the problem, this patch introduces the global variable __initramfs_size, which is calculated in the "usr/initramfs_data.S" file. The populate_rootfs() function can then use the start marker of the .init.ramfs section and the value of __initramfs_size for loading the initramfs. Because the start marker and size is sufficient, the __initramfs_end symbol is no longer needed and is removed. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com> Acked-by: Michal Marek <mmarek@suse.cz> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-09-18 02:24:11 +04:00
char *err = unpack_to_rootfs(__initramfs_start, __initramfs_size);
if (err)
panic("%s", err); /* Failed to decompress INTERNAL initramfs */
if (!initrd_start || IS_ENABLED(CONFIG_INITRAMFS_FORCE))
goto done;
if (IS_ENABLED(CONFIG_BLK_DEV_RAM))
printk(KERN_INFO "Trying to unpack rootfs image as initramfs...\n");
else
printk(KERN_INFO "Unpacking initramfs...\n");
err = unpack_to_rootfs((char *)initrd_start, initrd_end - initrd_start);
if (err) {
clean_rootfs();
populate_initrd_image(err);
}
done:
/*
* If the initrd region is overlapped with crashkernel reserved region,
* free only memory that is not part of crashkernel region.
*/
if (!do_retain_initrd && initrd_start && !kexec_free_initrd())
free_initrd_mem(initrd_start, initrd_end);
initrd_start = 0;
initrd_end = 0;
flush_delayed_fput();
return 0;
}
rootfs_initcall(populate_rootfs);