microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/md/dm-bio-record.h

44 строки
1012 B
C
Исходник Обычный вид История

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/*
* Copyright (C) 2004-2005 Red Hat, Inc. All rights reserved.
*
* This file is released under the GPL.
*/
#ifndef DM_BIO_RECORD_H
#define DM_BIO_RECORD_H
#include <linux/bio.h>
/*
* There are lots of mutable fields in the bio struct that get
* changed by the lower levels of the block layer. Some targets,
* such as multipath, may wish to resubmit a bio on error. The
* functions in this file help the target record and restore the
* original bio state.
*/
dm: preserve bi_io_vec when resubmitting bios Device mapper saves and restores various fields in the bio, but it doesn't save bi_io_vec. If the device driver modifies this after a partially successful request, dm-raid1 and dm-multipath may attempt to resubmit a bio that has bi_size inconsistent with the size of vector. To make requests resubmittable in dm-raid1 and dm-multipath, we must save and restore the bio vector as well. To reduce the memory overhead involved in this, we do not save the pages in a vector and use a 16-bit field size if the page size is less than 65536. Cc: stable@kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-04-02 22:55:23 +04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
struct dm_bio_details {
block: replace bi_bdev with a gendisk pointer and partitions index This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23 20:10:32 +03:00
struct gendisk *bi_disk;
u8 bi_partno;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
unsigned long bi_flags;
dm: Use bvec_iter for dm_bio_record() This patch doesn't itself have any functional changes, but immutable biovecs are going to add a bi_bvec_done member to bi_iter, which will need to be saved too here. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: dm-devel@redhat.com Reviewed-by: Mike Snitzer <snitzer@redhat.com>
2013-08-08 01:24:19 +04:00
struct bvec_iter bi_iter;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
};
static inline void dm_bio_record(struct dm_bio_details *bd, struct bio *bio)
{
block: replace bi_bdev with a gendisk pointer and partitions index This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23 20:10:32 +03:00
bd->bi_disk = bio->bi_disk;
bd->bi_partno = bio->bi_partno;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
bd->bi_flags = bio->bi_flags;
dm: Use bvec_iter for dm_bio_record() This patch doesn't itself have any functional changes, but immutable biovecs are going to add a bi_bvec_done member to bi_iter, which will need to be saved too here. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: dm-devel@redhat.com Reviewed-by: Mike Snitzer <snitzer@redhat.com>
2013-08-08 01:24:19 +04:00
bd->bi_iter = bio->bi_iter;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
static inline void dm_bio_restore(struct dm_bio_details *bd, struct bio *bio)
{
block: replace bi_bdev with a gendisk pointer and partitions index This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-23 20:10:32 +03:00
bio->bi_disk = bd->bi_disk;
bio->bi_partno = bd->bi_partno;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
bio->bi_flags = bd->bi_flags;
dm: Use bvec_iter for dm_bio_record() This patch doesn't itself have any functional changes, but immutable biovecs are going to add a bi_bvec_done member to bi_iter, which will need to be saved too here. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: dm-devel@redhat.com Reviewed-by: Mike Snitzer <snitzer@redhat.com>
2013-08-08 01:24:19 +04:00
bio->bi_iter = bd->bi_iter;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
#endif