WSL2-Linux-Kernel/drivers/base/test/test_async_driver_probe.c

304 строки
7.7 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2014 Google, Inc.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/hrtimer.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/time.h>
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
#include <linux/numa.h>
#include <linux/nodemask.h>
#include <linux/topology.h>
#define TEST_PROBE_DELAY (5 * 1000) /* 5 sec */
#define TEST_PROBE_THRESHOLD (TEST_PROBE_DELAY / 2)
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
static atomic_t warnings, errors, timeout, async_completed;
static int test_probe(struct platform_device *pdev)
{
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
struct device *dev = &pdev->dev;
/*
* Determine if we have hit the "timeout" limit for the test if we
* have then report it as an error, otherwise we wil sleep for the
* required amount of time and then report completion.
*/
if (atomic_read(&timeout)) {
dev_err(dev, "async probe took too long\n");
atomic_inc(&errors);
} else {
dev_dbg(&pdev->dev, "sleeping for %d msecs in probe\n",
TEST_PROBE_DELAY);
msleep(TEST_PROBE_DELAY);
dev_dbg(&pdev->dev, "done sleeping\n");
}
/*
* Report NUMA mismatch if device node is set and we are not
* performing an async init on that node.
*/
if (dev->driver->probe_type == PROBE_PREFER_ASYNCHRONOUS) {
if (IS_ENABLED(CONFIG_NUMA) &&
dev_to_node(dev) != numa_node_id()) {
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
dev_warn(dev, "NUMA node mismatch %d != %d\n",
dev_to_node(dev), numa_node_id());
atomic_inc(&warnings);
}
atomic_inc(&async_completed);
}
return 0;
}
static struct platform_driver async_driver = {
.driver = {
.name = "test_async_driver",
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
},
.probe = test_probe,
};
static struct platform_driver sync_driver = {
.driver = {
.name = "test_sync_driver",
.probe_type = PROBE_FORCE_SYNCHRONOUS,
},
.probe = test_probe,
};
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
static struct platform_device *async_dev[NR_CPUS * 2];
static struct platform_device *sync_dev[2];
static struct platform_device *
test_platform_device_register_node(char *name, int id, int nid)
{
struct platform_device *pdev;
int ret;
pdev = platform_device_alloc(name, id);
if (!pdev)
return NULL;
if (nid != NUMA_NO_NODE)
set_dev_node(&pdev->dev, nid);
ret = platform_device_add(pdev);
if (ret) {
platform_device_put(pdev);
return ERR_PTR(ret);
}
return pdev;
}
static int __init test_async_probe_init(void)
{
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
struct platform_device **pdev = NULL;
int async_id = 0, sync_id = 0;
unsigned long long duration;
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
ktime_t calltime, delta;
int err, nid, cpu;
pr_info("registering first set of asynchronous devices...\n");
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
for_each_online_cpu(cpu) {
nid = cpu_to_node(cpu);
pdev = &async_dev[async_id];
*pdev = test_platform_device_register_node("test_async_driver",
async_id,
nid);
if (IS_ERR(*pdev)) {
err = PTR_ERR(*pdev);
*pdev = NULL;
pr_err("failed to create async_dev: %d\n", err);
goto err_unregister_async_devs;
}
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
async_id++;
}
pr_info("registering asynchronous driver...\n");
calltime = ktime_get();
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
err = platform_driver_register(&async_driver);
if (err) {
pr_err("Failed to register async_driver: %d\n", err);
goto err_unregister_async_devs;
}
delta = ktime_sub(ktime_get(), calltime);
duration = (unsigned long long) ktime_to_ms(delta);
pr_info("registration took %lld msecs\n", duration);
if (duration > TEST_PROBE_THRESHOLD) {
pr_err("test failed: probe took too long\n");
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
err = -ETIMEDOUT;
goto err_unregister_async_driver;
}
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
pr_info("registering second set of asynchronous devices...\n");
calltime = ktime_get();
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
for_each_online_cpu(cpu) {
nid = cpu_to_node(cpu);
pdev = &sync_dev[sync_id];
*pdev = test_platform_device_register_node("test_async_driver",
async_id,
nid);
if (IS_ERR(*pdev)) {
err = PTR_ERR(*pdev);
*pdev = NULL;
pr_err("failed to create async_dev: %d\n", err);
goto err_unregister_async_driver;
}
async_id++;
}
delta = ktime_sub(ktime_get(), calltime);
duration = (unsigned long long) ktime_to_ms(delta);
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
dev_info(&(*pdev)->dev,
"registration took %lld msecs\n", duration);
if (duration > TEST_PROBE_THRESHOLD) {
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
dev_err(&(*pdev)->dev,
"test failed: probe took too long\n");
err = -ETIMEDOUT;
goto err_unregister_async_driver;
}
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
pr_info("registering first synchronous device...\n");
nid = cpu_to_node(cpu);
pdev = &sync_dev[sync_id];
*pdev = test_platform_device_register_node("test_sync_driver",
sync_id,
NUMA_NO_NODE);
if (IS_ERR(*pdev)) {
err = PTR_ERR(*pdev);
*pdev = NULL;
pr_err("failed to create sync_dev: %d\n", err);
goto err_unregister_async_driver;
}
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
sync_id++;
pr_info("registering synchronous driver...\n");
calltime = ktime_get();
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
err = platform_driver_register(&sync_driver);
if (err) {
pr_err("Failed to register async_driver: %d\n", err);
goto err_unregister_sync_devs;
}
delta = ktime_sub(ktime_get(), calltime);
duration = (unsigned long long) ktime_to_ms(delta);
pr_info("registration took %lld msecs\n", duration);
if (duration < TEST_PROBE_THRESHOLD) {
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
dev_err(&(*pdev)->dev,
"test failed: probe was too quick\n");
err = -ETIMEDOUT;
goto err_unregister_sync_driver;
}
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
pr_info("registering second synchronous device...\n");
pdev = &sync_dev[sync_id];
calltime = ktime_get();
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
*pdev = test_platform_device_register_node("test_sync_driver",
sync_id,
NUMA_NO_NODE);
if (IS_ERR(*pdev)) {
err = PTR_ERR(*pdev);
*pdev = NULL;
pr_err("failed to create sync_dev: %d\n", err);
goto err_unregister_sync_driver;
}
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
sync_id++;
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
delta = ktime_sub(ktime_get(), calltime);
duration = (unsigned long long) ktime_to_ms(delta);
dev_info(&(*pdev)->dev,
"registration took %lld msecs\n", duration);
if (duration < TEST_PROBE_THRESHOLD) {
dev_err(&(*pdev)->dev,
"test failed: probe was too quick\n");
err = -ETIMEDOUT;
goto err_unregister_sync_driver;
}
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
/*
* The async events should have completed while we were taking care
* of the synchronous events. We will now terminate any outstanding
* asynchronous probe calls remaining by forcing timeout and remove
* the driver before we return which should force the flush of the
* pending asynchronous probe calls.
*
* Otherwise if they completed without errors or warnings then
* report successful completion.
*/
if (atomic_read(&async_completed) != async_id) {
pr_err("async events still pending, forcing timeout\n");
atomic_inc(&timeout);
err = -ETIMEDOUT;
} else if (!atomic_read(&errors) && !atomic_read(&warnings)) {
pr_info("completed successfully\n");
return 0;
}
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
err_unregister_sync_driver:
platform_driver_unregister(&sync_driver);
err_unregister_sync_devs:
while (sync_id--)
platform_device_unregister(sync_dev[sync_id]);
err_unregister_async_driver:
platform_driver_unregister(&async_driver);
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
err_unregister_async_devs:
while (async_id--)
platform_device_unregister(async_dev[async_id]);
/*
* If err is already set then count that as an additional error for
* the test. Otherwise we will report an invalid argument error and
* not count that as we should have reached here as a result of
* errors or warnings being reported by the probe routine.
*/
if (err)
atomic_inc(&errors);
else
err = -EINVAL;
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
pr_err("Test failed with %d errors and %d warnings\n",
atomic_read(&errors), atomic_read(&warnings));
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
return err;
}
module_init(test_async_probe_init);
static void __exit test_async_probe_exit(void)
{
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
int id = 2;
platform_driver_unregister(&async_driver);
platform_driver_unregister(&sync_driver);
driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity The current async_probe test code is only testing one device allocated prior to driver load and only loading one device afterwards. Instead of doing things this way it makes much more sense to load one device per CPU in order to actually stress the async infrastructure. By doing this we should see delays significantly increase in the event of devices being serialized. In addition I have updated the test to verify that we are trying to place the work on the correct NUMA node when we are running in async mode. By doing this we can verify the best possible outcome for device and driver load times. I have added a timeout value that is used to disable the sleep and instead cause the probe routine to report an error indicating it timed out. By doing this we limit the maximum runtime for the test to 20 seconds or less. The last major change in this set is that I have gone through and tuned it for handling the massive number of possible events that will be scheduled. Instead of reporting the sleep for each individual device it is moved to only being displayed if we enable debugging. With this patch applied below are what a failing test and a passing test should look like. I elided a few hundred lines in the failing test that were duplicated since the system I was testing on had a massive number of CPU cores: -- Failing -- [ 243.524697] test_async_driver_probe: registering first set of asynchronous devices... [ 243.535625] test_async_driver_probe: registering asynchronous driver... [ 243.543038] test_async_driver_probe: registration took 0 msecs [ 243.549559] test_async_driver_probe: registering second set of asynchronous devices... [ 243.568350] platform test_async_driver.447: registration took 9 msecs [ 243.575544] test_async_driver_probe: registering first synchronous device... [ 243.583454] test_async_driver_probe: registering synchronous driver... [ 248.825920] test_async_driver_probe: registration took 5235 msecs [ 248.825922] test_async_driver_probe: registering second synchronous device... [ 248.825928] test_async_driver test_async_driver.443: NUMA node mismatch 3 != 1 [ 248.825932] test_async_driver test_async_driver.445: NUMA node mismatch 3 != 1 [ 248.825935] test_async_driver test_async_driver.446: NUMA node mismatch 3 != 1 [ 248.825939] test_async_driver test_async_driver.440: NUMA node mismatch 3 != 1 [ 248.825943] test_async_driver test_async_driver.441: NUMA node mismatch 3 != 1 ... [ 248.827150] test_async_driver test_async_driver.229: NUMA node mismatch 0 != 1 [ 248.827158] test_async_driver test_async_driver.228: NUMA node mismatch 0 != 1 [ 248.827220] test_async_driver test_async_driver.281: NUMA node mismatch 2 != 1 [ 248.827229] test_async_driver test_async_driver.282: NUMA node mismatch 2 != 1 [ 248.827240] test_async_driver test_async_driver.280: NUMA node mismatch 2 != 1 [ 253.945834] test_async_driver test_async_driver.1: NUMA node mismatch 0 != 1 [ 253.945878] test_sync_driver test_sync_driver.1: registration took 5119 msecs [ 253.961693] test_async_driver_probe: async events still pending, forcing timeout and synchronize [ 259.065839] test_async_driver test_async_driver.2: NUMA node mismatch 0 != 1 [ 259.073786] test_async_driver test_async_driver.3: async probe took too long [ 259.081669] test_async_driver test_async_driver.3: NUMA node mismatch 0 != 1 [ 259.089569] test_async_driver test_async_driver.4: async probe took too long [ 259.097451] test_async_driver test_async_driver.4: NUMA node mismatch 0 != 1 [ 259.105338] test_async_driver test_async_driver.5: async probe took too long [ 259.113204] test_async_driver test_async_driver.5: NUMA node mismatch 0 != 1 [ 259.121089] test_async_driver test_async_driver.6: async probe took too long [ 259.128961] test_async_driver test_async_driver.6: NUMA node mismatch 0 != 1 [ 259.136850] test_async_driver test_async_driver.7: async probe took too long ... [ 262.124062] test_async_driver test_async_driver.221: async probe took too long [ 262.132130] test_async_driver test_async_driver.221: NUMA node mismatch 3 != 1 [ 262.140206] test_async_driver test_async_driver.222: async probe took too long [ 262.148277] test_async_driver test_async_driver.222: NUMA node mismatch 3 != 1 [ 262.156351] test_async_driver test_async_driver.223: async probe took too long [ 262.164419] test_async_driver test_async_driver.223: NUMA node mismatch 3 != 1 [ 262.172630] test_async_driver_probe: Test failed with 222 errors and 336 warnings -- Passing -- [ 105.419247] test_async_driver_probe: registering first set of asynchronous devices... [ 105.432040] test_async_driver_probe: registering asynchronous driver... [ 105.439718] test_async_driver_probe: registration took 0 msecs [ 105.446239] test_async_driver_probe: registering second set of asynchronous devices... [ 105.477986] platform test_async_driver.447: registration took 22 msecs [ 105.485276] test_async_driver_probe: registering first synchronous device... [ 105.493169] test_async_driver_probe: registering synchronous driver... [ 110.597981] test_async_driver_probe: registration took 5097 msecs [ 110.604806] test_async_driver_probe: registering second synchronous device... [ 115.707490] test_sync_driver test_sync_driver.1: registration took 5094 msecs [ 115.715478] test_async_driver_probe: completed successfully Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22 21:39:52 +03:00
while (id--)
platform_device_unregister(sync_dev[id]);
id = NR_CPUS * 2;
while (id--)
platform_device_unregister(async_dev[id]);
}
module_exit(test_async_probe_exit);
MODULE_DESCRIPTION("Test module for asynchronous driver probing");
MODULE_AUTHOR("Dmitry Torokhov <dtor@chromium.org>");
MODULE_LICENSE("GPL");