microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/firmware/Kconfig

309 строки
11 KiB
Plaintext
Исходник Обычный вид История

treewide: Add SPDX license identifier - Makefile/Kconfig Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19 15:07:45 +03:00
# SPDX-License-Identifier: GPL-2.0-only
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#
# For a description of the syntax of this configuration file,
docs: kbuild: convert docs to ReST and rename to *.rst The kbuild documentation clearly shows that the documents there are written at different times: some use markdown, some use their own peculiar logic to split sections. Convert everything to ReST without affecting too much the author's style and avoiding adding uneeded markups. The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-06-12 20:52:48 +03:00
# see Documentation/kbuild/kconfig-language.rst.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#
menu "Firmware Drivers"
firmware: arm_scmi: Make SCMI transports configurable Add configuration options to be able to select which SCMI transports have to be compiled into the SCMI stack. Mailbox and SMC are by default enabled if their related dependencies are satisfied. While doing that move all SCMI related config options in their own dedicated submenu. Link: https://lore.kernel.org/r/20210803131024.40280-9-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-08-03 16:10:17 +03:00
source "drivers/firmware/arm_scmi/Kconfig"
firmware: arm_scmi: add device power domain support using genpd This patch hooks up the support for device power domain provided by SCMI using the Linux generic power domain infrastructure. Cc: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2017-06-14 15:48:26 +03:00
firmware: add support for ARM System Control and Power Interface(SCPI) protocol This patch adds support for System Control and Power Interface (SCPI) Message Protocol used between the Application Cores(AP) and the System Control Processor(SCP). The MHU peripheral provides a mechanism for inter-processor communication between SCP's M3 processor and AP. SCP offers control and management of the core/cluster power states, various power domain DVFS including the core/cluster, certain system clocks configuration, thermal sensors and many others. This protocol driver provides interface for all the client drivers using SCPI to make use of the features offered by the SCP. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Jon Medhurst (Tixy) <tixy@linaro.org> Cc: Jassi Brar <jassisinghbrar@gmail.com> Cc: Liviu Dudau <Liviu.Dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2015-03-30 12:59:52 +03:00
config ARM_SCPI_PROTOCOL
tristate "ARM System Control and Power Interface (SCPI) Message Protocol"
firmware: arm_scpi: Add hardware dependencies With a name like that, I assume that the ARM SCPI protocol is only useful on the ARM architectures. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Cc: Jon Medhurst (Tixy) <tixy@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-30 11:52:01 +03:00
depends on ARM || ARM64 || COMPILE_TEST
firmware: arm_scpi: make it depend on MAILBOX instead of ARM_MHU ARM_SCPI_PROTOCOL can be used with any mailbox and not just ARM MHU mailbox controller. This patch drops it's dependency on ARM_MHU and make it depend on just mailbox framework. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2016-06-05 20:23:21 +03:00
depends on MAILBOX
firmware: add support for ARM System Control and Power Interface(SCPI) protocol This patch adds support for System Control and Power Interface (SCPI) Message Protocol used between the Application Cores(AP) and the System Control Processor(SCP). The MHU peripheral provides a mechanism for inter-processor communication between SCP's M3 processor and AP. SCP offers control and management of the core/cluster power states, various power domain DVFS including the core/cluster, certain system clocks configuration, thermal sensors and many others. This protocol driver provides interface for all the client drivers using SCPI to make use of the features offered by the SCP. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Jon Medhurst (Tixy) <tixy@linaro.org> Cc: Jassi Brar <jassisinghbrar@gmail.com> Cc: Liviu Dudau <Liviu.Dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2015-03-30 12:59:52 +03:00
help
System Control and Power Interface (SCPI) Message Protocol is
defined for the purpose of communication between the Application
Cores(AP) and the System Control Processor(SCP). The MHU peripheral
provides a mechanism for inter-processor communication between SCP
and AP.
firmware: fix a spelling mistake "managament" -> "management" in Kconfig There is a spelling mistake in the Kconfig help text. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201204192250.1151316-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-04 22:22:50 +03:00
SCP controls most of the power management on the Application
firmware: add support for ARM System Control and Power Interface(SCPI) protocol This patch adds support for System Control and Power Interface (SCPI) Message Protocol used between the Application Cores(AP) and the System Control Processor(SCP). The MHU peripheral provides a mechanism for inter-processor communication between SCP's M3 processor and AP. SCP offers control and management of the core/cluster power states, various power domain DVFS including the core/cluster, certain system clocks configuration, thermal sensors and many others. This protocol driver provides interface for all the client drivers using SCPI to make use of the features offered by the SCP. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Jon Medhurst (Tixy) <tixy@linaro.org> Cc: Jassi Brar <jassisinghbrar@gmail.com> Cc: Liviu Dudau <Liviu.Dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2015-03-30 12:59:52 +03:00
Processors. It offers control and management of: the core/cluster
power states, various power domain DVFS including the core/cluster,
certain system clocks configuration, thermal sensors and many
others.
This protocol library provides interface for all the client drivers
making use of the features offered by the SCP.
firmware: scpi: add device power domain support using genpd This patch hooks up the support for device power domain provided by SCPI using the Linux generic power domain infrastructure. Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Jon Medhurst <tixy@linaro.org> Reviewed-by: Jon Medhurst <tixy@linaro.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2016-06-02 18:34:03 +03:00
config ARM_SCPI_POWER_DOMAIN
tristate "SCPI power domain driver"
firmware: scpi: add CONFIG_OF dependency We get a harmless warning if the ARM_SCPI_POWER_DOMAIN driver is enabled without CONFIG_OF during compile testing: warning: (ARM_SCPI_POWER_DOMAIN) selects PM_GENERIC_DOMAINS_OF which has unmet direct dependencies (PM_GENERIC_DOMAINS && OF) There is no need to select PM_GENERIC_DOMAINS_OF if OF is set, so we can replace the 'select' with a dependency. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 8bec4337ad40 ("firmware: scpi: add device power domain support using genpd") Acked-by: Sudeep Holla <sudeep.holla@arm.com>
2016-07-06 15:49:46 +03:00
depends on ARM_SCPI_PROTOCOL || (COMPILE_TEST && OF)
firmware: scpi: add device power domain support using genpd This patch hooks up the support for device power domain provided by SCPI using the Linux generic power domain infrastructure. Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Jon Medhurst <tixy@linaro.org> Reviewed-by: Jon Medhurst <tixy@linaro.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2016-06-02 18:34:03 +03:00
default y
select PM_GENERIC_DOMAINS if PM
help
This enables support for the SCPI power domains which can be
enabled or disabled via the SCP firmware
firmware: arm_sdei: Add driver for Software Delegated Exceptions The Software Delegated Exception Interface (SDEI) is an ARM standard for registering callbacks from the platform firmware into the OS. This is typically used to implement firmware notifications (such as firmware-first RAS) or promote an IRQ that has been promoted to a firmware-assisted NMI. Add the code for detecting the SDEI version and the framework for registering and unregistering events. Subsequent patches will add the arch-specific backend code and the necessary power management hooks. Only shared events are supported, power management, private events and discovery for ACPI systems will be added by later patches. Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-01-08 18:38:09 +03:00
config ARM_SDE_INTERFACE
bool "ARM Software Delegated Exception Interface (SDEI)"
depends on ARM64
help
The Software Delegated Exception Interface (SDEI) is an ARM
standard for registering callbacks from the platform firmware
into the OS. This is typically used to implement RAS notifications.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
config EDD
[PATCH] EDD isn't EXPERIMENTAL anymore Lots of people use this. Apparently RH has for over 18 months so lets drop EXPERIMENTAL. Signed-off-by: Chris Wedgwood <cw@f00f.org> Cc: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 16:47:46 +04:00
tristate "BIOS Enhanced Disk Drive calls determine boot disk"
firmware: only allow EDD on x86 Rather than have the EDD depend on !ia64 (and assuming that only ia64, x86, x86_64 will be including this Kconfig), have EDD depend on the only arches which can support this code. This should allow all other arches to cleanly include the firmware Kconfig. Also simplify the x86 string used by FIRMWARE_MEMMAP to match EDD. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 05:01:16 +03:00
depends on X86
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
help
Say Y or M here if you want to enable BIOS Enhanced Disk Drive
Services real mode BIOS calls to determine which disk
BIOS tries boot from. This information is then exported via sysfs.
This option is experimental and is known to fail to boot on some
obscure configurations. Most disk controller BIOS vendors do
not yet implement this feature.
edd: add default mode CONFIG_EDD_OFF=n, override with edd={on,off} Add a kernel parameter option to 'edd' to enable/disable BIOS Enhanced Disk Drive Services. CONFIG_EDD_OFF disables EDD while still compiling EDD into the kernel. Default behavior can be forced using 'edd=on' or 'edd=off' as a kernel parameter. [akpm@linux-foundation.org: fix kernel-parameters.txt] Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 12:02:45 +04:00
config EDD_OFF
bool "Sets default behavior for EDD detection to off"
depends on EDD
default n
help
Say Y if you want EDD disabled by default, even though it is compiled into the
kernel. Say N if you want EDD enabled by default. EDD can be dynamically set
using the kernel parameter 'edd={on|skipmbr|off}'.
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00
config FIRMWARE_MEMMAP
kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-21 01:44:16 +03:00
bool "Add firmware-provided memory map to sysfs" if EXPERT
firmware: only allow EDD on x86 Rather than have the EDD depend on !ia64 (and assuming that only ia64, x86, x86_64 will be including this Kconfig), have EDD depend on the only arches which can support this code. This should allow all other arches to cleanly include the firmware Kconfig. Also simplify the x86 string used by FIRMWARE_MEMMAP to match EDD. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 05:01:16 +03:00
default X86
sysfs: add /sys/firmware/memmap This patch adds /sys/firmware/memmap interface that represents the BIOS (or Firmware) provided memory map. The tree looks like: /sys/firmware/memmap/0/start (hex number) end (hex number) type (string) ... /1/start end type With the following shell snippet one can print the memory map in the same form the kernel prints itself when booting on x86 (the E820 map). --------- 8< -------------------------- #!/bin/sh cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" done --------- >8 -------------------------- That patch only provides the needed interface: 1. The sysfs interface. 2. The structure and enumeration definition. 3. The function firmware_map_add() and firmware_map_add_early() that should be called from architecture code (E820/EFI, for example) to add the contents to the interface. If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does nothing without cluttering the architecture-specific code with #ifdef's. The purpose of the new interface is kexec: While /proc/iomem represents the *used* memory map (e.g. modified via kernel parameters like 'memmap' and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory map provided via the firmware. So kexec can: - use the original memory map for rebooting, - use the /proc/iomem for setting up the ELF core headers for kdump case that should only represent the memory of the system. The patch has been tested on i386 and x86_64. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Greg KH <gregkh@suse.de> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 15:12:54 +04:00
help
Add the firmware-provided (unmodified) memory map to /sys/firmware/memmap.
That memory map is used for example by kexec to set up parameter area
for the next kernel, but can also be used for debugging purposes.
See also Documentation/ABI/testing/sysfs-firmware-memmap.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
config EFI_PCDP
bool "Console device selection via EFI PCDP or HCDP table"
depends on ACPI && EFI && IA64
default y if IA64
help
If your firmware supplies the PCDP table, and you want to
automatically use the primary console device it describes
as the Linux console, say Y here.
If your firmware supplies the HCDP table, and you want to
use the first serial port it describes as the Linux console,
say Y here. If your EFI ConOut path contains only a UART
device, it will become the console automatically. Otherwise,
you must specify the "console=hcdp" kernel boot argument.
Neither the PCDP nor the HCDP affects naming of serial devices,
so a serial console may be /dev/ttyS0, /dev/ttyS1, etc, depending
on how the driver discovers devices.
You must also enable the appropriate drivers (serial, VGA, etc.)
Update broken web addresses in the kernel. The patch below updates broken web addresses in the kernel Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Dimitry Torokhov <dmitry.torokhov@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Acked-by: Ben Pfaff <blp@cs.stanford.edu> Acked-by: Hans J. Koch <hjk@linutronix.de> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-18 13:03:14 +04:00
See DIG64_HCDPv20_042804.pdf available from
<http://www.dig64.org/specifications/>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
DMI-based module autoloading The patch below adds DMI/SMBIOS based module autoloading to the Linux kernel. The idea is to load laptop drivers automatically (and other drivers which cannot be autoloaded otherwise), based on the DMI system identification information of the BIOS. Right now most distros manually try to load all available laptop drivers on bootup in the hope that at least one of them loads successfully. This patch does away with all that, and uses udev to automatically load matching drivers on the right machines. Basically the patch just exports the DMI information that has been parsed by the kernel anyway to userspace via a sysfs device /sys/class/dmi/id and makes sure that proper modalias attributes are available. Besides adding the "modalias" attribute it also adds attributes for a few other DMI fields which might be useful for writing udev rules. This patch is not an attempt to export the entire DMI/SMBIOS data to userspace. We already have "dmidecode" which parses the complete DMI info from userspace. The purpose of this patch is machine model identification and good udev integration. To take advantage of DMI based module autoloading, a driver should export one or more MODULE_ALIAS fields similar to these: MODULE_ALIAS("dmi:*:svnMICRO-STARINT'LCO.,LTD:pnMS-1013:pvr0131*:cvnMICRO-STARINT'LCO.,LTD:ct10:*"); MODULE_ALIAS("dmi:*:svnMicro-StarInternational:pnMS-1058:pvr0581:rvnMSI:rnMS-1058:*:ct10:*"); MODULE_ALIAS("dmi:*:svnMicro-StarInternational:pnMS-1412:*:rvnMSI:rnMS-1412:*:cvnMICRO-STARINT'LCO.,LTD:ct10:*"); MODULE_ALIAS("dmi:*:svnNOTEBOOK:pnSAM2000:pvr0131*:cvnMICRO-STARINT'LCO.,LTD:ct10:*"); These lines are specific to my msi-laptop.c driver. They are basically just a concatenation of a few carefully selected DMI fields with all potentially bad characters stripped. Besides laptop drivers, modules like "hdaps", the i2c modules and the hwmon modules are good candidates for "dmi:" MODULE_ALIAS lines. Besides merely exporting the DMI data via sysfs the patch adds support for a few more DMI fields. Especially the CHASSIS fields are very useful to identify different laptop modules. The patch also adds working MODULE_ALIAS lines to my msi-laptop.c driver. I'd like to thank Kay Sievers for helping me to clean up this patch for posting it on lkml. Patch is against Linus' current GIT HEAD. Should probably apply to older kernels as well without modification. Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-09 00:07:02 +04:00
config DMIID
bool "Export DMI identification via sysfs to userspace"
depends on DMI
default y
help
Say Y here if you want to query SMBIOS/DMI system identification
information from userspace through /sys/class/dmi/id/ or if you want
DMI-based module auto-loading.
firmware: Basic dmi-sysfs support Introduce a new module "dmi-sysfs" that exports the broken out entries of the DMI table through sysfs. Entries are enumerated via dmi_walk() on module load, and are populated as kobjects rooted at /sys/firmware/dmi/entries. Entries are named "<type>-<instance>", where: <type> : is the type of the entry, and <instance> : is the ordinal count within the DMI table of that entry type. This instance is used in lieu the DMI entry's handle as no assurances are made by the kernel that handles are unique. All entries export the following attributes: length : The length of the formatted portion of the entry handle : The handle given to this entry by the firmware raw : The raw bytes of the entire entry, including the formatted portion, the unformatted (strings) portion, and the two terminating nul characters. type : The DMI entry type instance : The ordinal instance of this entry given its type. position : The position ordinal of the entry within the table in its entirety. Entries in dmi-sysfs are kobject backed members called "struct dmi_sysfs_entry" and belong to dmi_kset. They are threaded through entry_list (protected by entry_list_lock) so that we can find them at cleanup time. Signed-off-by: Mike Waychison <mikew@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-23 04:53:21 +03:00
config DMI_SYSFS
tristate "DMI table support in sysfs"
depends on SYSFS && DMI
default n
help
Say Y or M here to enable the exporting of the raw DMI table
data via sysfs. This is useful for consuming the data without
requiring any access to /dev/mem at all. Tables are found
under /sys/firmware/dmi when this option is enabled and
loaded.
firmware/dmi_scan: generalize for use by other archs This patch makes a couple of changes to the SMBIOS/DMI scanning code so it can be used on other archs (such as ARM and arm64): (a) wrap the calls to ioremap()/iounmap(), this allows the use of a flavor of ioremap() more suitable for random unaligned access; (b) allow the non-EFI fallback probe into hardcoded physical address 0xF0000 to be disabled. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: Ingo Molnar <mingo@elte.hu> Cc "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-24 03:54:39 +04:00
config DMI_SCAN_MACHINE_NON_EFI_FALLBACK
bool
Firmware: add iSCSI iBFT Support Add /sysfs/firmware/ibft/[initiator|targetX|ethernetX] directories along with text properties which export the the iSCSI Boot Firmware Table (iBFT) structure. What is iSCSI Boot Firmware Table? It is a mechanism for the iSCSI tools to extract from the machine NICs the iSCSI connection information so that they can automagically mount the iSCSI share/target. Currently the iSCSI information is hard-coded in the initrd. The /sysfs entries are read-only one-name-and-value fields. The usual set of data exposed is: # for a in `find /sys/firmware/ibft/ -type f -print`; do echo -n "$a: "; cat $a; done /sys/firmware/ibft/target0/target-name: iqn.2007.com.intel-sbx44:storage-10gb /sys/firmware/ibft/target0/nic-assoc: 0 /sys/firmware/ibft/target0/chap-type: 0 /sys/firmware/ibft/target0/lun: 00000000 /sys/firmware/ibft/target0/port: 3260 /sys/firmware/ibft/target0/ip-addr: 192.168.79.116 /sys/firmware/ibft/target0/flags: 3 /sys/firmware/ibft/target0/index: 0 /sys/firmware/ibft/ethernet0/mac: 00:11:25:9d:8b:01 /sys/firmware/ibft/ethernet0/vlan: 0 /sys/firmware/ibft/ethernet0/gateway: 192.168.79.254 /sys/firmware/ibft/ethernet0/origin: 0 /sys/firmware/ibft/ethernet0/subnet-mask: 255.255.252.0 /sys/firmware/ibft/ethernet0/ip-addr: 192.168.77.41 /sys/firmware/ibft/ethernet0/flags: 7 /sys/firmware/ibft/ethernet0/index: 0 /sys/firmware/ibft/initiator/initiator-name: iqn.2007-07.com:konrad.initiator /sys/firmware/ibft/initiator/flags: 3 /sys/firmware/ibft/initiator/index: 0 For full details of the IBFT structure please take a look at: ftp://ftp.software.ibm.com/systems/support/system_x_pdf/ibm_iscsi_boot_firmware_table_v1.02.pdf [akpm@linux-foundation.org: fix build] Signed-off-by: Konrad Rzeszutek <konradr@linux.vnet.ibm.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Peter Jones <pjones@redhat.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-10 06:50:41 +04:00
config ISCSI_IBFT_FIND
bool "iSCSI Boot Firmware Table Attributes"
iscsi_ibft: make ISCSI_IBFT dependson ACPI instead of ISCSI_IBFT_FIND iscsi_ibft can use ACPI to find the iBFT entry during bootup, currently, ISCSI_IBFT depends on ISCSI_IBFT_FIND which is a X86 legacy way to find the iBFT by searching through the low memory. This patch changes the dependency so that other arch like ARM64 can use ISCSI_IBFT as long as the arch supports ACPI. ibft_init() needs to use the global variable ibft_addr declared in iscsi_ibft_find.c. A #ifndef CONFIG_ISCSI_IBFT_FIND is needed to declare the variable if CONFIG_ISCSI_IBFT_FIND is not selected. Moving ibft_addr into the iscsi_ibft.c does not work because if ISCSI_IBFT is selected as a module, the arch/x86/kernel/setup.c won't be able to find the variable at compile time. Signed-off-by: Thomas Tai <thomas.tai@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-07-18 21:37:34 +03:00
depends on X86 && ISCSI_IBFT
Firmware: add iSCSI iBFT Support Add /sysfs/firmware/ibft/[initiator|targetX|ethernetX] directories along with text properties which export the the iSCSI Boot Firmware Table (iBFT) structure. What is iSCSI Boot Firmware Table? It is a mechanism for the iSCSI tools to extract from the machine NICs the iSCSI connection information so that they can automagically mount the iSCSI share/target. Currently the iSCSI information is hard-coded in the initrd. The /sysfs entries are read-only one-name-and-value fields. The usual set of data exposed is: # for a in `find /sys/firmware/ibft/ -type f -print`; do echo -n "$a: "; cat $a; done /sys/firmware/ibft/target0/target-name: iqn.2007.com.intel-sbx44:storage-10gb /sys/firmware/ibft/target0/nic-assoc: 0 /sys/firmware/ibft/target0/chap-type: 0 /sys/firmware/ibft/target0/lun: 00000000 /sys/firmware/ibft/target0/port: 3260 /sys/firmware/ibft/target0/ip-addr: 192.168.79.116 /sys/firmware/ibft/target0/flags: 3 /sys/firmware/ibft/target0/index: 0 /sys/firmware/ibft/ethernet0/mac: 00:11:25:9d:8b:01 /sys/firmware/ibft/ethernet0/vlan: 0 /sys/firmware/ibft/ethernet0/gateway: 192.168.79.254 /sys/firmware/ibft/ethernet0/origin: 0 /sys/firmware/ibft/ethernet0/subnet-mask: 255.255.252.0 /sys/firmware/ibft/ethernet0/ip-addr: 192.168.77.41 /sys/firmware/ibft/ethernet0/flags: 7 /sys/firmware/ibft/ethernet0/index: 0 /sys/firmware/ibft/initiator/initiator-name: iqn.2007-07.com:konrad.initiator /sys/firmware/ibft/initiator/flags: 3 /sys/firmware/ibft/initiator/index: 0 For full details of the IBFT structure please take a look at: ftp://ftp.software.ibm.com/systems/support/system_x_pdf/ibm_iscsi_boot_firmware_table_v1.02.pdf [akpm@linux-foundation.org: fix build] Signed-off-by: Konrad Rzeszutek <konradr@linux.vnet.ibm.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Peter Jones <pjones@redhat.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-10 06:50:41 +04:00
default n
help
This option enables the kernel to find the region of memory
in which the ISCSI Boot Firmware Table (iBFT) resides. This
is necessary for iSCSI Boot Firmware Table Attributes module to work
properly.
config ISCSI_IBFT
tristate "iSCSI Boot Firmware Table Attributes module"
ibft: convert iscsi_ibft module to iscsi boot lib This patch just converts the iscsi_ibft module to the iscsi boot sysfs lib module. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org> Signed-off-by: Peter Jones <pjones@redhat.com>
2010-04-12 22:06:18 +04:00
select ISCSI_BOOT_SYSFS
iscsi_ibft: make ISCSI_IBFT dependson ACPI instead of ISCSI_IBFT_FIND iscsi_ibft can use ACPI to find the iBFT entry during bootup, currently, ISCSI_IBFT depends on ISCSI_IBFT_FIND which is a X86 legacy way to find the iBFT by searching through the low memory. This patch changes the dependency so that other arch like ARM64 can use ISCSI_IBFT as long as the arch supports ACPI. ibft_init() needs to use the global variable ibft_addr declared in iscsi_ibft_find.c. A #ifndef CONFIG_ISCSI_IBFT_FIND is needed to declare the variable if CONFIG_ISCSI_IBFT_FIND is not selected. Moving ibft_addr into the iscsi_ibft.c does not work because if ISCSI_IBFT is selected as a module, the arch/x86/kernel/setup.c won't be able to find the variable at compile time. Signed-off-by: Thomas Tai <thomas.tai@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-07-18 21:37:34 +03:00
select ISCSI_IBFT_FIND if X86
depends on ACPI && SCSI && SCSI_LOWLEVEL
Firmware: add iSCSI iBFT Support Add /sysfs/firmware/ibft/[initiator|targetX|ethernetX] directories along with text properties which export the the iSCSI Boot Firmware Table (iBFT) structure. What is iSCSI Boot Firmware Table? It is a mechanism for the iSCSI tools to extract from the machine NICs the iSCSI connection information so that they can automagically mount the iSCSI share/target. Currently the iSCSI information is hard-coded in the initrd. The /sysfs entries are read-only one-name-and-value fields. The usual set of data exposed is: # for a in `find /sys/firmware/ibft/ -type f -print`; do echo -n "$a: "; cat $a; done /sys/firmware/ibft/target0/target-name: iqn.2007.com.intel-sbx44:storage-10gb /sys/firmware/ibft/target0/nic-assoc: 0 /sys/firmware/ibft/target0/chap-type: 0 /sys/firmware/ibft/target0/lun: 00000000 /sys/firmware/ibft/target0/port: 3260 /sys/firmware/ibft/target0/ip-addr: 192.168.79.116 /sys/firmware/ibft/target0/flags: 3 /sys/firmware/ibft/target0/index: 0 /sys/firmware/ibft/ethernet0/mac: 00:11:25:9d:8b:01 /sys/firmware/ibft/ethernet0/vlan: 0 /sys/firmware/ibft/ethernet0/gateway: 192.168.79.254 /sys/firmware/ibft/ethernet0/origin: 0 /sys/firmware/ibft/ethernet0/subnet-mask: 255.255.252.0 /sys/firmware/ibft/ethernet0/ip-addr: 192.168.77.41 /sys/firmware/ibft/ethernet0/flags: 7 /sys/firmware/ibft/ethernet0/index: 0 /sys/firmware/ibft/initiator/initiator-name: iqn.2007-07.com:konrad.initiator /sys/firmware/ibft/initiator/flags: 3 /sys/firmware/ibft/initiator/index: 0 For full details of the IBFT structure please take a look at: ftp://ftp.software.ibm.com/systems/support/system_x_pdf/ibm_iscsi_boot_firmware_table_v1.02.pdf [akpm@linux-foundation.org: fix build] Signed-off-by: Konrad Rzeszutek <konradr@linux.vnet.ibm.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Peter Jones <pjones@redhat.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-10 06:50:41 +04:00
default n
help
This option enables support for detection and exposing of iSCSI
Boot Firmware Table (iBFT) via sysfs to userspace. If you wish to
detect iSCSI boot parameters dynamically during system boot, say Y.
Otherwise, say N.
ARM: bcm2835: Add the Raspberry Pi firmware driver This gives us a function for making mailbox property channel requests of the firmware, which is most notable in that it will let us get and set clock rates. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2015-02-26 13:08:06 +03:00
config RASPBERRYPI_FIRMWARE
Revert "USB: pci-quirks: Add Raspberry Pi 4 quirk" This reverts commit c65822fef4adc0ba40c37a47337376ce75f7a7bc. The initialization of Raspberry Pi 4's USB chip is now handled through a reset controller. No need to directly call the firmware routine through a PCI quirk. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20200629161845.6021-7-nsaenzjulienne@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-29 19:18:42 +03:00
tristate "Raspberry Pi Firmware Driver"
ARM: bcm2835: Add the Raspberry Pi firmware driver This gives us a function for making mailbox property channel requests of the firmware, which is most notable in that it will let us get and set clock rates. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
2015-02-26 13:08:06 +03:00
depends on BCM2835_MBOX
help
This option enables support for communicating with the firmware on the
Raspberry Pi.
firmware: introduce sysfs driver for QEMU's fw_cfg device Make fw_cfg entries of type "file" available via sysfs. Entries are listed under /sys/firmware/qemu_fw_cfg/by_key, in folders named after each entry's selector key. Filename, selector value, and size read-only attributes are included for each entry. Also, a "raw" attribute allows retrieval of the full binary content of each entry. The fw_cfg device can be instantiated automatically from ACPI or the Device Tree, or manually by using a kernel module (or command line) parameter, with a syntax outlined in the documentation file. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28 17:23:11 +03:00
config FW_CFG_SYSFS
tristate "QEMU fw_cfg device support in sysfs"
fw_cfg: Add support for parisc architecture Signed-off-by: Helge Deller <deller@gmx.de>
2020-08-29 11:00:40 +03:00
depends on SYSFS && (ARM || ARM64 || PARISC || PPC_PMAC || SPARC || X86)
firmware: qemu config needs I/O ports Not all machines have PCI style I/O port memory, or they do not allow mapping it using the ioport_map() function, whcih results in a build error with the newly added qemu firmware code: drivers/firmware/built-in.o: In function `fw_cfg_io_cleanup': qemu_fw_cfg.c:(.text+0x144): undefined reference to `ioport_unmap' drivers/firmware/built-in.o: In function `fw_cfg_sysfs_probe': qemu_fw_cfg.c:(.text+0xb18): undefined reference to `ioport_map' This adds a Kconfig dependency to ensure the driver can only be built on platforms that support it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 75f3e8e47f38 ("firmware: introduce sysfs driver for QEMU's fw_cfg device") Acked-by: Gabriel Somlo <somlo@cmu.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-11 17:23:51 +03:00
depends on HAS_IOPORT_MAP
firmware: introduce sysfs driver for QEMU's fw_cfg device Make fw_cfg entries of type "file" available via sysfs. Entries are listed under /sys/firmware/qemu_fw_cfg/by_key, in folders named after each entry's selector key. Filename, selector value, and size read-only attributes are included for each entry. Also, a "raw" attribute allows retrieval of the full binary content of each entry. The fw_cfg device can be instantiated automatically from ACPI or the Device Tree, or manually by using a kernel module (or command line) parameter, with a syntax outlined in the documentation file. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28 17:23:11 +03:00
default n
help
Say Y or M here to enable the exporting of the QEMU firmware
configuration (fw_cfg) file entries via sysfs. Entries are
found under /sys/firmware/fw_cfg when this option is enabled
and loaded.
config FW_CFG_SYSFS_CMDLINE
bool "QEMU fw_cfg device parameter parsing"
depends on FW_CFG_SYSFS
help
Allow the qemu_fw_cfg device to be initialized via the kernel
command line or using a module parameter.
WARNING: Using incorrect parameters (base address in particular)
may crash your system.
firmware: add Intel Stratix10 service layer driver Some features of the Intel Stratix10 SoC require a level of privilege higher than the kernel is granted. Such secure features include FPGA programming. In terms of the ARMv8 architecture, the kernel runs at Exception Level 1 (EL1), access to the features requires Exception Level 3 (EL3). The Intel Stratix10 SoC service layer provides an in kernel API for drivers to request access to the secure features. The requests are queued and processed one by one. ARM’s SMCCC is used to pass the execution of the requests on to a secure monitor (EL3). The header file stratix10-sve-client.h defines the interface between service providers (FPGA manager is one of them) and service layer. The header file stratix10-smc.h defines the secure monitor call (SMC) message protocols used for service layer driver in normal world (EL1) to communicate with secure monitor SW in secure monitor exception level 3 (EL3). Signed-off-by: Richard Gong <richard.gong@intel.com> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13 21:14:01 +03:00
config INTEL_STRATIX10_SERVICE
tristate "Intel Stratix10 Service Layer"
firmware: stratix10-svc: build only on 64-bit ARM The Stratix10 service layer and RCU drivers are useful only on Stratix10, so on ARMv8. Compile testing the RCU driver on 32-bit ARM fails: drivers/firmware/stratix10-rsu.c: In function 'rsu_status_callback': include/linux/compiler_types.h:320:38: error: call to '__compiletime_assert_179' declared with attribute error: FIELD_GET: type of reg too small for mask _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ... drivers/firmware/stratix10-rsu.c:96:26: note: in expansion of macro 'FIELD_GET' priv->status.version = FIELD_GET(RSU_VERSION_MASK, Fixes: 4483397b0353 ("ARM: socfpga: drop ARCH_SOCFPGA") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reported-by: kernel test robot <lkp@intel.com> Acked-by: Richard Gong <richard.gong@linux.intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> --- v2: add Fixes tag
2021-03-21 21:46:50 +03:00
depends on ARCH_INTEL_SOCFPGA && ARM64 && HAVE_ARM_SMCCC
firmware: add Intel Stratix10 service layer driver Some features of the Intel Stratix10 SoC require a level of privilege higher than the kernel is granted. Such secure features include FPGA programming. In terms of the ARMv8 architecture, the kernel runs at Exception Level 1 (EL1), access to the features requires Exception Level 3 (EL3). The Intel Stratix10 SoC service layer provides an in kernel API for drivers to request access to the secure features. The requests are queued and processed one by one. ARM’s SMCCC is used to pass the execution of the requests on to a secure monitor (EL3). The header file stratix10-sve-client.h defines the interface between service providers (FPGA manager is one of them) and service layer. The header file stratix10-smc.h defines the secure monitor call (SMC) message protocols used for service layer driver in normal world (EL1) to communicate with secure monitor SW in secure monitor exception level 3 (EL3). Signed-off-by: Richard Gong <richard.gong@intel.com> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13 21:14:01 +03:00
default n
help
Intel Stratix10 service layer runs at privileged exception level,
interfaces with the service providers (FPGA manager is one of them)
and manages secure monitor call to communicate with secure monitor
software at secure monitor exception level.
Say Y here if you want Stratix10 service layer support.
firmware: add Intel Stratix10 remote system update driver The Intel Remote System Update (RSU) driver exposes interfaces access through the Intel Service Layer to user space via sysfs interface. The RSU interfaces report and control some of the optional RSU features on Intel Stratix 10 SoC. The RSU feature provides a way for customers to update the boot configuration of a Intel Stratix 10 SoC device with significantly reduced risk of corrupting the bitstream storage and bricking the system. Signed-off-by: Richard Gong <richard.gong@intel.com> Reviewed-by: Alan Tull <atull@kernel.org> Link: https://lore.kernel.org/r/1567516701-26026-3-git-send-email-richard.gong@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-03 16:18:19 +03:00
config INTEL_STRATIX10_RSU
tristate "Intel Stratix10 Remote System Update"
depends on INTEL_STRATIX10_SERVICE
help
The Intel Remote System Update (RSU) driver exposes interfaces
access through the Intel Service Layer to user space via sysfs
device attribute nodes. The RSU interfaces report/control some of
the optional RSU features of the Stratix 10 SoC FPGA.
The RSU provides a way for customers to update the boot
configuration of a Stratix 10 SoC device with significantly reduced
risk of corrupting the bitstream storage and bricking the system.
Enable RSU support if you are using an Intel SoC FPGA with the RSU
feature enabled and you want Linux user space control.
Say Y here if you want Intel RSU support.
firmware: qcom: scm: Move the scm driver to drivers/firmware Architectural changes in the ARM Linux kernel tree mandate the eventual removal of the mach-* directories. Move the scm driver to drivers/firmware and the scm header to include/linux to support that removal. Signed-off-by: Kumar Gala <galak@codeaurora.org>
2015-02-27 00:49:09 +03:00
config QCOM_SCM
qcom_scm: hide Kconfig symbol Now that SCM can be a loadable module, we have to add another dependency to avoid link failures when ipa or adreno-gpu are built-in: aarch64-linux-ld: drivers/net/ipa/ipa_main.o: in function `ipa_probe': ipa_main.c:(.text+0xfc4): undefined reference to `qcom_scm_is_available' ld.lld: error: undefined symbol: qcom_scm_is_available >>> referenced by adreno_gpu.c >>> gpu/drm/msm/adreno/adreno_gpu.o:(adreno_zap_shader_load) in archive drivers/built-in.a This can happen when CONFIG_ARCH_QCOM is disabled and we don't select QCOM_MDT_LOADER, but some other module selects QCOM_SCM. Ideally we'd use a similar dependency here to what we have for QCOM_RPROC_COMMON, but that causes dependency loops from other things selecting QCOM_SCM. This appears to be an endless problem, so try something different this time: - CONFIG_QCOM_SCM becomes a hidden symbol that nothing 'depends on' but that is simply selected by all of its users - All the stubs in include/linux/qcom_scm.h can go away - arm-smccc.h needs to provide a stub for __arm_smccc_smc() to allow compile-testing QCOM_SCM on all architectures. - To avoid a circular dependency chain involving RESET_CONTROLLER and PINCTRL_SUNXI, drop the 'select RESET_CONTROLLER' statement. According to my testing this still builds fine, and the QCOM platform selects this symbol already. Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Alex Elder <elder@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-09-28 10:50:27 +03:00
tristate
firmware: qcom: scm: Move the scm driver to drivers/firmware Architectural changes in the ARM Linux kernel tree mandate the eventual removal of the mach-* directories. Move the scm driver to drivers/firmware and the scm header to include/linux to support that removal. Signed-off-by: Kumar Gala <galak@codeaurora.org>
2015-02-27 00:49:09 +03:00
firmware: qcom: scm: Expose download-mode control In order to aid post-mortem debugging the Qualcomm platforms provide a "memory download mode", where the boot loader will provide an interface for custom tools to "download" the content of RAM to a host machine. The mode is triggered by writing a magic value somewhere in RAM, that is read in the boot code path after a warm-restart. Two mechanism for setting this magic value are supported in modern platforms; a direct SCM call to enable the mode or through a secure io write of a magic value. In order for a normal reboot not to trigger "download mode" the magic must be cleared during a clean reboot. Download mode has to be enabled by including qcom_scm.download_mode=1 on the command line. Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-15 01:46:18 +03:00
config QCOM_SCM_DOWNLOAD_MODE_DEFAULT
bool "Qualcomm download mode enabled by default"
depends on QCOM_SCM
help
A device with "download mode" enabled will upon an unexpected
warm-restart enter a special debug mode that allows the user to
"download" memory content over USB for offline postmortem analysis.
The feature can be enabled/disabled on the kernel command line.
Say Y here to enable "download mode" by default.
drivers/firmware: move x86 Generic System Framebuffers support The x86 architecture has generic support to register a system framebuffer platform device. It either registers a "simple-framebuffer" if the config option CONFIG_X86_SYSFB is enabled, or a legacy VGA/VBE/EFI FB device. But the code is generic enough to be reused by other architectures and can be moved out of the arch/x86 directory. This will allow to also support the simple{fb,drm} drivers on non-x86 EFI platforms, such as aarch64 where these drivers are only supported with DT. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210625130947.1803678-2-javierm@redhat.com
2021-06-25 16:09:46 +03:00
config SYSFB
bool
default y
drivers/firmware: fix SYSFB depends to prevent build failures The Generic System Framebuffers support is built when the COMPILE_TEST option is enabled. But this wrongly assumes that all the architectures declare a struct screen_info. This is true for most architectures, but at least the following do not: arc, m68k, microblaze, openrisc, parisc and s390. By attempting to make this compile testeable on all architectures, it leads to linking errors as reported by the kernel test robot for parisc: All errors (new ones prefixed by >>): hppa-linux-ld: drivers/firmware/sysfb.o: in function `sysfb_init': (.init.text+0x24): undefined reference to `screen_info' >> hppa-linux-ld: (.init.text+0x28): undefined reference to `screen_info' To prevent these errors only allow sysfb to be built on systems that are going to need it, which are x86 BIOS and EFI. The EFI Kconfig symbol is used instead of (ARM || ARM64 || RISC) because some of these architectures only declare a struct screen_info if EFI is enabled. And also, because the SYSFB code is only used for EFI on these architectures. For !EFI the "simple-framebuffer" device is registered by OF when parsing the Device Tree Blob (if a DT node for this was defined). Fixes: d391c5827107 ("drivers/firmware: move x86 Generic System Framebuffers support") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210727093015.1225107-1-javierm@redhat.com
2021-07-27 12:30:15 +03:00
depends on X86 || EFI
drivers/firmware: move x86 Generic System Framebuffers support The x86 architecture has generic support to register a system framebuffer platform device. It either registers a "simple-framebuffer" if the config option CONFIG_X86_SYSFB is enabled, or a legacy VGA/VBE/EFI FB device. But the code is generic enough to be reused by other architectures and can be moved out of the arch/x86 directory. This will allow to also support the simple{fb,drm} drivers on non-x86 EFI platforms, such as aarch64 where these drivers are only supported with DT. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210625130947.1803678-2-javierm@redhat.com
2021-06-25 16:09:46 +03:00
drivers/firmware: consolidate EFI framebuffer setup for all arches The register_gop_device() function registers an "efi-framebuffer" platform device to match against the efifb driver, to have an early framebuffer for EFI platforms. But there is already support to do exactly the same by the Generic System Framebuffers (sysfb) driver. This used to be only for X86 but it has been moved to drivers/firmware and could be reused by other architectures. Also, besides supporting registering an "efi-framebuffer", this driver can register a "simple-framebuffer" allowing to use the siple{fb,drm} drivers on non-X86 EFI platforms. For example, on aarch64 these drivers can only be used with DT and doesn't have code to register a "simple-frambuffer" platform device when booting with EFI. For these reasons, let's remove the register_gop_device() duplicated code and instead move the platform specific logic that's there to sysfb driver. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210625131359.1804394-1-javierm@redhat.com
2021-06-25 16:13:59 +03:00
config SYSFB_SIMPLEFB
drivers/firmware: move x86 Generic System Framebuffers support The x86 architecture has generic support to register a system framebuffer platform device. It either registers a "simple-framebuffer" if the config option CONFIG_X86_SYSFB is enabled, or a legacy VGA/VBE/EFI FB device. But the code is generic enough to be reused by other architectures and can be moved out of the arch/x86 directory. This will allow to also support the simple{fb,drm} drivers on non-x86 EFI platforms, such as aarch64 where these drivers are only supported with DT. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210625130947.1803678-2-javierm@redhat.com
2021-06-25 16:09:46 +03:00
bool "Mark VGA/VBE/EFI FB as generic system framebuffer"
depends on SYSFB
help
Firmwares often provide initial graphics framebuffers so the BIOS,
bootloader or kernel can show basic video-output during boot for
user-guidance and debugging. Historically, x86 used the VESA BIOS
Extensions and EFI-framebuffers for this, which are mostly limited
drivers/firmware: consolidate EFI framebuffer setup for all arches The register_gop_device() function registers an "efi-framebuffer" platform device to match against the efifb driver, to have an early framebuffer for EFI platforms. But there is already support to do exactly the same by the Generic System Framebuffers (sysfb) driver. This used to be only for X86 but it has been moved to drivers/firmware and could be reused by other architectures. Also, besides supporting registering an "efi-framebuffer", this driver can register a "simple-framebuffer" allowing to use the siple{fb,drm} drivers on non-X86 EFI platforms. For example, on aarch64 these drivers can only be used with DT and doesn't have code to register a "simple-frambuffer" platform device when booting with EFI. For these reasons, let's remove the register_gop_device() duplicated code and instead move the platform specific logic that's there to sysfb driver. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210625131359.1804394-1-javierm@redhat.com
2021-06-25 16:13:59 +03:00
to x86 BIOS or EFI systems.
drivers/firmware: move x86 Generic System Framebuffers support The x86 architecture has generic support to register a system framebuffer platform device. It either registers a "simple-framebuffer" if the config option CONFIG_X86_SYSFB is enabled, or a legacy VGA/VBE/EFI FB device. But the code is generic enough to be reused by other architectures and can be moved out of the arch/x86 directory. This will allow to also support the simple{fb,drm} drivers on non-x86 EFI platforms, such as aarch64 where these drivers are only supported with DT. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210625130947.1803678-2-javierm@redhat.com
2021-06-25 16:09:46 +03:00
This option, if enabled, marks VGA/VBE/EFI framebuffers as generic
framebuffers so the new generic system-framebuffer drivers can be
drivers/firmware: consolidate EFI framebuffer setup for all arches The register_gop_device() function registers an "efi-framebuffer" platform device to match against the efifb driver, to have an early framebuffer for EFI platforms. But there is already support to do exactly the same by the Generic System Framebuffers (sysfb) driver. This used to be only for X86 but it has been moved to drivers/firmware and could be reused by other architectures. Also, besides supporting registering an "efi-framebuffer", this driver can register a "simple-framebuffer" allowing to use the siple{fb,drm} drivers on non-X86 EFI platforms. For example, on aarch64 these drivers can only be used with DT and doesn't have code to register a "simple-frambuffer" platform device when booting with EFI. For these reasons, let's remove the register_gop_device() duplicated code and instead move the platform specific logic that's there to sysfb driver. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210625131359.1804394-1-javierm@redhat.com
2021-06-25 16:13:59 +03:00
used instead. If the framebuffer is not compatible with the generic
drivers/firmware: move x86 Generic System Framebuffers support The x86 architecture has generic support to register a system framebuffer platform device. It either registers a "simple-framebuffer" if the config option CONFIG_X86_SYSFB is enabled, or a legacy VGA/VBE/EFI FB device. But the code is generic enough to be reused by other architectures and can be moved out of the arch/x86 directory. This will allow to also support the simple{fb,drm} drivers on non-x86 EFI platforms, such as aarch64 where these drivers are only supported with DT. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210625130947.1803678-2-javierm@redhat.com
2021-06-25 16:09:46 +03:00
modes, it is advertised as fallback platform framebuffer so legacy
drivers like efifb, vesafb and uvesafb can pick it up.
If this option is not selected, all system framebuffers are always
marked as fallback platform framebuffers as usual.
Note: Legacy fbdev drivers, including vesafb, efifb, uvesafb, will
not be able to pick up generic system framebuffers if this option
is selected. You are highly encouraged to enable simplefb as
replacement if you select this option. simplefb can correctly deal
with generic system framebuffers. But you should still keep vesafb
and others enabled as fallback if a system framebuffer is
incompatible with simplefb.
If unsure, say Y.
firmware: Add basic support for TI System Control Interface (TI-SCI) protocol Texas Instrument's System Control Interface (TI-SCI) Message Protocol is used in Texas Instrument's System on Chip (SoC) such as those in keystone family K2G SoC to communicate between various compute processors with a central system controller entity. TI-SCI message protocol provides support for management of various hardware entities within the SoC. Add support driver to allow communication with system controller entity within the SoC using the mailbox client. We introduce the basic registration and query capability for the driver protocol as part of this change. Subsequent patches add in functionality specific to the TI-SCI features. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2016-10-19 02:08:34 +03:00
config TI_SCI_PROTOCOL
tristate "TI System Control Interface (TISCI) Message Protocol"
depends on TI_MESSAGE_MANAGER
help
TI System Control Interface (TISCI) Message Protocol is used to manage
compute systems such as ARM, DSP etc with the system controller in
complex System on Chip(SoC) such as those found on certain keystone
generation SoC from TI.
System controller provides various facilities including power
management function support.
This protocol library is used by client drivers to use the features
provided by the system controller.
firmware: Move Trusted Foundations support Move the Trusted Foundations support out of arch/arm/firmware and into drivers/firmware where most other firmware support implementations are located. Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-10 11:47:28 +03:00
config TRUSTED_FOUNDATIONS
bool "Trusted Foundations secure monitor support"
firmware: trusted_foundations: add ARMv7 dependency The "+sec" extension is invalid for older ARM architectures, but the code can now be built on any ARM configuration: /tmp/trusted_foundations-2d0882.s: Assembler messages: /tmp/trusted_foundations-2d0882.s:194: Error: architectural extension `sec' is not allowed for the current base architecture /tmp/trusted_foundations-2d0882.s:201: Error: selected processor does not support `smc #0' in ARM mode /tmp/trusted_foundations-2d0882.s:213: Error: architectural extension `sec' is not allowed for the current base architecture /tmp/trusted_foundations-2d0882.s:220: Error: selected processor does not support `smc #0' in ARM mode Add a dependency on ARMv7 for the build. Fixes: 4cb5d9eca143 ("firmware: Move Trusted Foundations support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-17 15:33:23 +03:00
depends on ARM && CPU_V7
firmware: Move Trusted Foundations support Move the Trusted Foundations support out of arch/arm/firmware and into drivers/firmware where most other firmware support implementations are located. Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-10 11:47:28 +03:00
help
Some devices (including most early Tegra-based consumer devices on
the market) are booted with the Trusted Foundations secure monitor
active, requiring some core operations to be performed by the secure
monitor instead of the kernel.
This option allows the kernel to invoke the secure monitor whenever
required on devices using Trusted Foundations. See the functions and
comments in linux/firmware/trusted_foundations.h or the device tree
bindings for "tlm,trusted-foundations" for details on how to use it.
Choose N if you don't know what this is about.
firmware: Add Turris Mox rWTM firmware driver This adds a driver to communicate with the firmware running on the secure processor of the Turris Mox router, enabling the kernel to retrieve true random numbers from the Entropy Bit Generator and to read some information burned into eFuses when device was manufactured: and to sign messages with the ECDSA private key burned into each Turris Mox device when manufacturing. This also adds support to read other information burned into eFuses: - serial number - board version - MAC addresses - RAM size - ECDSA public key (this is not read directly from eFuses, rather it is computed by the firmware as pair to the burned private key) The source code of the firmware is open source and can be found at https://gitlab.labs.nic.cz/turris/mox-boot-builder/tree/master/wtmi The firmware is also able to, on demand, sign messages with the burned ECDSA private key, but since Linux's akcipher API is not yet stable (and therefore not exposed to userspace via netlink), this functionality is not supported yet. Link: https://lore.kernel.org/r/20190822014318.19478-3-marek.behun@nic.cz Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-22 04:43:17 +03:00
config TURRIS_MOX_RWTM
tristate "Turris Mox rWTM secure firmware driver"
depends on ARCH_MVEBU || COMPILE_TEST
depends on HAS_DMA && OF
depends on MAILBOX
select HW_RANDOM
select ARMADA_37XX_RWTM_MBOX
help
This driver communicates with the firmware on the Cortex-M3 secure
processor of the Turris Mox router. Enable if you are building for
Turris Mox, and you will be able to read the device serial number and
other manufacturing data and also utilize the Entropy Bit Generator
for hardware random number generation.
firmware: arm_ffa: Add initial FFA bus support for device enumeration The Arm FF for Armv8-A specification has concept of endpoints or partitions. In the Normal world, a partition could be a VM when the Virtualization extension is enabled or the kernel itself. In order to handle multiple partitions, we can create a FFA device for each such partition on a dedicated FFA bus. Similarly, different drivers requiring FFA transport can be registered on the same bus. We can match the device and drivers using UUID. This is mostly for the in-kernel users with FFA drivers. Link: https://lore.kernel.org/r/20210521151033.181846-2-sudeep.holla@arm.com Tested-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-05-21 18:10:29 +03:00
source "drivers/firmware/arm_ffa/Kconfig"
MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/ After Broadcom switched from MIPS to ARM for their home routers we need to have NVRAM driver in some common place (not arch/mips/). As explained in Kconfig, this driver is responsible for parsing SoC configuration data that is passed to the kernel in flash from the bootloader firmware called "CFE". We were thinking about putting it in bus directory, however there are two possible buses for MIPS: drivers/ssb/ and drivers/bcma/. So this won't fit there and this is why I would like to move this driver to the drivers/firmware/. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Mike Waychison <mikew@google.com> Cc: Roy Franz <roy.franz@linaro.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Patchwork: https://patchwork.linux-mips.org/patch/10544/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-11 00:05:08 +03:00
source "drivers/firmware/broadcom/Kconfig"
firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs wm_adsp originally provided firmware loading on some audio DSP and was implemented as an ASoC codec driver. However, the firmware loading now covers a wider range of DSP cores and peripherals containing them, beyond just audio. So it needs to be available to non-audio drivers. All the core firmware loading support has been moved into a new driver cs_dsp, leaving only the ASoC-specific parts in wm_adsp. Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210913160057.103842-17-simont@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 19:00:57 +03:00
source "drivers/firmware/cirrus/Kconfig"
driver: Google EFI SMI The "gsmi" driver bridges userland with firmware specific routines for accessing hardware. Currently, this driver only supports NVRAM and eventlog information. Deprecated functions have been removed from the driver, though their op-codes are left in place so that they are not re-used. This driver works by trampolining into the firmware via the smi_command outlined in the FADT table. Three protocols are used due to various limitations over time, but all are included herein. This driver should only ever load on Google boards, identified by either a "Google, Inc." board vendor string in DMI, or "GOOGLE" in the OEM strings of the FADT ACPI table. This logic happens in gsmi_system_valid(). Signed-off-by: Duncan Laurie <dlaurie@google.com> Signed-off-by: Aaron Durbin <adurbin@google.com> Signed-off-by: Mike Waychison <mikew@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-30 04:39:19 +04:00
source "drivers/firmware/google/Kconfig"
efivars: Move pstore code into the new EFI directory efivars.c has grown far too large and needs to be divided up. Create a new directory and move the persistence storage code to efi-pstore.c now that it uses the new efivar API. This helps us to greatly reduce the size of efivars.c and paves the way for moving other code out of efivars.c. Note that because CONFIG_EFI_VARS can be built as a module efi-pstore must also include support for building as a module. Reviewed-by: Tom Gundersen <teg@jklm.no> Tested-by: Tom Gundersen <teg@jklm.no> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Anton Vorontsov <cbouatmailru@gmail.com> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-02-08 19:48:51 +04:00
source "drivers/firmware/efi/Kconfig"
firmware: imx: add SCU firmware driver support The System Controller Firmware (SCFW) is a low-level system function which runs on a dedicated Cortex-M core to provide power, clock, and resource management. It exists on some i.MX8 processors. e.g. i.MX8QM (QM, QP), and i.MX8QX (QXP, DX). This patch implements the SCU firmware IPC function and the common message sending API sc_call_rpc. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Jassi Brar <jassisinghbrar@gmail.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-10-07 16:04:42 +03:00
source "drivers/firmware/imx/Kconfig"
firmware: Amlogic: Add secure monitor driver Introduce a driver to provide calls into secure monitor mode. In the Amlogic SoCs these calls are used for multiple reasons: access to NVMEM, set USB boot, enable JTAG, etc... Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Carlo Caione <carlo@endlessm.com> [khilman: add in SZ_4K cleanup] Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-08-27 16:43:43 +03:00
source "drivers/firmware/meson/Kconfig"
firmware: smccc: Add HAVE_ARM_SMCCC_DISCOVERY to identify SMCCC v1.1 and above SMCCC v1.0 lacked discoverability of version and features. To accelerate adoption of few mitigations and protect systems more rapidly from various vulnerability, PSCI v1.0 was updated to add SMCCC discovery mechanism though the PSCI firmware implementation of PSCI_FEATURES(SMCCC_VERSION) which returns success on firmware compliant to SMCCC v1.1 and above. This inturn makes SMCCC v1.1 and above dependent on ARM_PSCI_FW for backward compatibility. Let us introduce a new hidden config for the same to build more features on top of SMCCC v1.1 and above. While at it, also sort alphabetically the psci entry. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Etienne Carriere <etienne.carriere@st.com> Reviewed-by: Etienne Carriere <etienne.carriere@st.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20200518091222.27467-2-sudeep.holla@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-05-18 12:12:16 +03:00
source "drivers/firmware/psci/Kconfig"
source "drivers/firmware/smccc/Kconfig"
firmware: tegra: Add IVC library The Inter-VM communication (IVC) is a communication protocol which is designed for interprocessor communication (IPC) or the communication between the hypervisor and the virtual machine with a guest OS. Message channels are used to communicate between processors. They are backed by DRAM or SRAM, so care must be taken to maintain coherence of data. The IVC library maintains memory-based descriptors for the transmission and reception channels as well as the data coherence of the counter and payload. Clients, such as the driver for the BPMP firmware, can use the library to exchange messages with remote processors. Based on work by Peter Newman <pnewman@nvidia.com> and Joseph Lo <josephl@nvidia.com>. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-08-19 20:05:04 +03:00
source "drivers/firmware/tegra/Kconfig"
firmware: xilinx: Add Zynqmp firmware driver This patch is adding communication layer with firmware. Firmware driver provides an interface to firmware APIs. Interface APIs can be used by any driver to communicate to PMUFW(Platform Management Unit). All requests go through ATF. Signed-off-by: Rajan Vaja <rajanv@xilinx.com> Signed-off-by: Jolly Shah <jollys@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-09-12 22:38:36 +03:00
source "drivers/firmware/xilinx/Kconfig"
driver: Google EFI SMI The "gsmi" driver bridges userland with firmware specific routines for accessing hardware. Currently, this driver only supports NVRAM and eventlog information. Deprecated functions have been removed from the driver, though their op-codes are left in place so that they are not re-used. This driver works by trampolining into the firmware via the smi_command outlined in the FADT table. Three protocols are used due to various limitations over time, but all are included herein. This driver should only ever load on Google boards, identified by either a "Google, Inc." board vendor string in DMI, or "GOOGLE" in the OEM strings of the FADT ACPI table. This logic happens in gsmi_system_valid(). Signed-off-by: Duncan Laurie <dlaurie@google.com> Signed-off-by: Aaron Durbin <adurbin@google.com> Signed-off-by: Mike Waychison <mikew@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-30 04:39:19 +04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
endmenu