WSL2-Linux-Kernel/fs/xfs/xfs_file.c

1389 строки
36 KiB
C
Исходник Обычный вид История

/*
* Copyright (c) 2000-2005 Silicon Graphics, Inc.
* All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it would be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "xfs.h"
#include "xfs_fs.h"
#include "xfs_shared.h"
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_trans_resv.h"
#include "xfs_mount.h"
#include "xfs_da_format.h"
#include "xfs_da_btree.h"
#include "xfs_inode.h"
#include "xfs_trans.h"
#include "xfs_inode_item.h"
#include "xfs_bmap.h"
#include "xfs_bmap_util.h"
#include "xfs_error.h"
#include "xfs_dir2.h"
#include "xfs_dir2_priv.h"
#include "xfs_ioctl.h"
#include "xfs_trace.h"
#include "xfs_log.h"
xfs: run an eofblocks scan on ENOSPC/EDQUOT From: Brian Foster <bfoster@redhat.com> Speculative preallocation and and the associated throttling metrics assume we're working with large files on large filesystems. Users have reported inefficiencies in these mechanisms when we happen to be dealing with large files on smaller filesystems. This can occur because while prealloc throttling is aggressive under low free space conditions, it is not active until we reach 5% free space or less. For example, a 40GB filesystem has enough space for several files large enough to have multi-GB preallocations at any given time. If those files are slow growing, they might reserve preallocation for long periods of time as well as avoid the background scanner due to frequent modification. If a new file is written under these conditions, said file has no access to this already reserved space and premature ENOSPC is imminent. To handle this scenario, modify the buffered write ENOSPC handling and retry sequence to invoke an eofblocks scan. In the smaller filesystem scenario, the eofblocks scan resets the usage of preallocation such that when the 5% free space threshold is met, throttling effectively takes over to provide fair and efficient preallocation until legitimate ENOSPC. The eofblocks scan is selective based on the nature of the failure. For example, an EDQUOT failure in a particular quota will use a filtered scan for that quota. Because we don't know which quota might have caused an allocation failure at any given time, we include each applicable quota determined to be under low free space conditions in the scan. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-07-24 13:49:28 +04:00
#include "xfs_icache.h"
#include <linux/aio.h>
#include <linux/dcache.h>
#include <linux/falloc.h>
#include <linux/pagevec.h>
static const struct vm_operations_struct xfs_file_vm_ops;
/*
* Locking primitives for read and write IO paths to ensure we consistently use
* and order the inode->i_mutex, ip->i_lock and ip->i_iolock.
*/
static inline void
xfs_rw_ilock(
struct xfs_inode *ip,
int type)
{
if (type & XFS_IOLOCK_EXCL)
mutex_lock(&VFS_I(ip)->i_mutex);
xfs_ilock(ip, type);
}
static inline void
xfs_rw_iunlock(
struct xfs_inode *ip,
int type)
{
xfs_iunlock(ip, type);
if (type & XFS_IOLOCK_EXCL)
mutex_unlock(&VFS_I(ip)->i_mutex);
}
static inline void
xfs_rw_ilock_demote(
struct xfs_inode *ip,
int type)
{
xfs_ilock_demote(ip, type);
if (type & XFS_IOLOCK_EXCL)
mutex_unlock(&VFS_I(ip)->i_mutex);
}
/*
* xfs_iozero
*
* xfs_iozero clears the specified range of buffer supplied,
* and marks all the affected blocks as valid and modified. If
* an affected block is not allocated, it will be allocated. If
* an affected block is not completely overwritten, and is not
* valid before the operation, it will be read from disk before
* being partially zeroed.
*/
int
xfs_iozero(
struct xfs_inode *ip, /* inode */
loff_t pos, /* offset in file */
size_t count) /* size of data to zero */
{
struct page *page;
struct address_space *mapping;
int status;
mapping = VFS_I(ip)->i_mapping;
do {
unsigned offset, bytes;
void *fsdata;
offset = (pos & (PAGE_CACHE_SIZE -1)); /* Within page */
bytes = PAGE_CACHE_SIZE - offset;
if (bytes > count)
bytes = count;
status = pagecache_write_begin(NULL, mapping, pos, bytes,
AOP_FLAG_UNINTERRUPTIBLE,
&page, &fsdata);
if (status)
break;
zero_user(page, offset, bytes);
status = pagecache_write_end(NULL, mapping, pos, bytes, bytes,
page, fsdata);
WARN_ON(status <= 0); /* can't return less than zero! */
pos += bytes;
count -= bytes;
status = 0;
} while (count);
return (-status);
}
/*
* Fsync operations on directories are much simpler than on regular files,
* as there is no file data to flush, and thus also no need for explicit
* cache flush operations, and there are no non-transaction metadata updates
* on directories either.
*/
STATIC int
xfs_dir_fsync(
struct file *file,
loff_t start,
loff_t end,
int datasync)
{
struct xfs_inode *ip = XFS_I(file->f_mapping->host);
struct xfs_mount *mp = ip->i_mount;
xfs_lsn_t lsn = 0;
trace_xfs_dir_fsync(ip);
xfs_ilock(ip, XFS_ILOCK_SHARED);
if (xfs_ipincount(ip))
lsn = ip->i_itemp->ili_last_lsn;
xfs_iunlock(ip, XFS_ILOCK_SHARED);
if (!lsn)
return 0;
return _xfs_log_force_lsn(mp, lsn, XFS_LOG_SYNC, NULL);
}
STATIC int
xfs_file_fsync(
struct file *file,
loff_t start,
loff_t end,
int datasync)
{
struct inode *inode = file->f_mapping->host;
struct xfs_inode *ip = XFS_I(inode);
struct xfs_mount *mp = ip->i_mount;
int error = 0;
int log_flushed = 0;
xfs_lsn_t lsn = 0;
trace_xfs_file_fsync(ip);
error = filemap_write_and_wait_range(inode->i_mapping, start, end);
if (error)
return error;
if (XFS_FORCED_SHUTDOWN(mp))
return -EIO;
xfs_iflags_clear(ip, XFS_ITRUNCATED);
if (mp->m_flags & XFS_MOUNT_BARRIER) {
/*
* If we have an RT and/or log subvolume we need to make sure
* to flush the write cache the device used for file data
* first. This is to ensure newly written file data make
* it to disk before logging the new inode size in case of
* an extending write.
*/
if (XFS_IS_REALTIME_INODE(ip))
xfs_blkdev_issue_flush(mp->m_rtdev_targp);
else if (mp->m_logdev_targp != mp->m_ddev_targp)
xfs_blkdev_issue_flush(mp->m_ddev_targp);
}
/*
* All metadata updates are logged, which means that we just have
* to flush the log up to the latest LSN that touched the inode.
*/
xfs_ilock(ip, XFS_ILOCK_SHARED);
if (xfs_ipincount(ip)) {
if (!datasync ||
(ip->i_itemp->ili_fields & ~XFS_ILOG_TIMESTAMP))
lsn = ip->i_itemp->ili_last_lsn;
}
xfs_iunlock(ip, XFS_ILOCK_SHARED);
if (lsn)
error = _xfs_log_force_lsn(mp, lsn, XFS_LOG_SYNC, &log_flushed);
/*
* If we only have a single device, and the log force about was
* a no-op we might have to flush the data device cache here.
* This can only happen for fdatasync/O_DSYNC if we were overwriting
* an already allocated file and thus do not have any metadata to
* commit.
*/
if ((mp->m_flags & XFS_MOUNT_BARRIER) &&
mp->m_logdev_targp == mp->m_ddev_targp &&
!XFS_IS_REALTIME_INODE(ip) &&
!log_flushed)
xfs_blkdev_issue_flush(mp->m_ddev_targp);
return error;
}
STATIC ssize_t
xfs_file_read_iter(
struct kiocb *iocb,
struct iov_iter *to)
{
struct file *file = iocb->ki_filp;
struct inode *inode = file->f_mapping->host;
struct xfs_inode *ip = XFS_I(inode);
struct xfs_mount *mp = ip->i_mount;
size_t size = iov_iter_count(to);
ssize_t ret = 0;
int ioflags = 0;
xfs_fsize_t n;
loff_t pos = iocb->ki_pos;
XFS_STATS_INC(xs_read_calls);
if (unlikely(file->f_flags & O_DIRECT))
ioflags |= XFS_IO_ISDIRECT;
if (file->f_mode & FMODE_NOCMTIME)
ioflags |= XFS_IO_INVIS;
if (unlikely(ioflags & XFS_IO_ISDIRECT)) {
xfs_buftarg_t *target =
XFS_IS_REALTIME_INODE(ip) ?
mp->m_rtdev_targp : mp->m_ddev_targp;
xfs: allow logical-sector sized O_DIRECT Some time ago, mkfs.xfs started picking the storage physical sector size as the default filesystem "sector size" in order to avoid RMW costs incurred by doing IOs at logical sector size alignments. However, this means that for a filesystem made with i.e. a 4k sector size on an "advanced format" 4k/512 disk, 512-byte direct IOs are no longer allowed. This means that XFS has essentially turned this AF drive into a hard 4K device, from the filesystem on up. XFS's mkfs-specified "sector size" is really just controlling the minimum size & alignment of filesystem metadata. There is no real need to tightly couple XFS's minimal metadata size to the minimum allowed direct IO size; XFS can continue doing metadata in optimal sizes, but still allow smaller DIOs for apps which issue them, for whatever reason. This patch adds a new field to the xfs_buftarg, so that we now track 2 sizes: 1) The metadata sector size, which is the minimum unit and alignment of IO which will be performed by metadata operations. 2) The device logical sector size The first is used internally by the file system for metadata alignment and IOs. The second is used for the minimum allowed direct IO alignment. This has passed xfstests on filesystems made with 4k sectors, including when run under the patch I sent to ignore XFS_IOC_DIOINFO, and issue 512 DIOs anyway. I also directly tested end of block behavior on preallocated, sparse, and existing files when we do a 512 IO into a 4k file on a 4k-sector filesystem, to be sure there were no unexpected behaviors. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2014-01-22 02:46:23 +04:00
/* DIO must be aligned to device logical sector size */
if ((pos | size) & target->bt_logical_sectormask) {
if (pos == i_size_read(inode))
return 0;
return -EINVAL;
}
}
n = mp->m_super->s_maxbytes - pos;
if (n <= 0 || size == 0)
return 0;
if (n < size)
size = n;
if (XFS_FORCED_SHUTDOWN(mp))
return -EIO;
/*
* Locking is a bit tricky here. If we take an exclusive lock
* for direct IO, we effectively serialise all new concurrent
* read IO to this file and block it behind IO that is currently in
* progress because IO in progress holds the IO lock shared. We only
* need to hold the lock exclusive to blow away the page cache, so
* only take lock exclusively if the page cache needs invalidation.
* This allows the normal direct IO case of no page cache pages to
* proceeed concurrently without serialisation.
*/
xfs_rw_ilock(ip, XFS_IOLOCK_SHARED);
if ((ioflags & XFS_IO_ISDIRECT) && inode->i_mapping->nrpages) {
xfs_rw_iunlock(ip, XFS_IOLOCK_SHARED);
xfs_rw_ilock(ip, XFS_IOLOCK_EXCL);
if (inode->i_mapping->nrpages) {
ret = filemap_write_and_wait_range(
VFS_I(ip)->i_mapping,
pos, pos + size - 1);
if (ret) {
xfs_rw_iunlock(ip, XFS_IOLOCK_EXCL);
return ret;
}
/*
* Invalidate whole pages. This can return an error if
* we fail to invalidate a page, but this should never
* happen on XFS. Warn if it does fail.
*/
ret = invalidate_inode_pages2_range(VFS_I(ip)->i_mapping,
pos >> PAGE_CACHE_SHIFT,
(pos + size - 1) >> PAGE_CACHE_SHIFT);
WARN_ON_ONCE(ret);
ret = 0;
}
xfs_rw_ilock_demote(ip, XFS_IOLOCK_EXCL);
}
trace_xfs_file_read(ip, size, pos, ioflags);
ret = generic_file_read_iter(iocb, to);
if (ret > 0)
XFS_STATS_ADD(xs_read_bytes, ret);
xfs_rw_iunlock(ip, XFS_IOLOCK_SHARED);
return ret;
}
STATIC ssize_t
xfs_file_splice_read(
struct file *infilp,
loff_t *ppos,
struct pipe_inode_info *pipe,
size_t count,
unsigned int flags)
{
struct xfs_inode *ip = XFS_I(infilp->f_mapping->host);
int ioflags = 0;
ssize_t ret;
XFS_STATS_INC(xs_read_calls);
if (infilp->f_mode & FMODE_NOCMTIME)
ioflags |= XFS_IO_INVIS;
if (XFS_FORCED_SHUTDOWN(ip->i_mount))
return -EIO;
xfs_rw_ilock(ip, XFS_IOLOCK_SHARED);
trace_xfs_file_splice_read(ip, count, *ppos, ioflags);
ret = generic_file_splice_read(infilp, ppos, pipe, count, flags);
if (ret > 0)
XFS_STATS_ADD(xs_read_bytes, ret);
xfs_rw_iunlock(ip, XFS_IOLOCK_SHARED);
return ret;
}
/*
* This routine is called to handle zeroing any space in the last block of the
* file that is beyond the EOF. We do this since the size is being increased
* without writing anything to that block and we don't want to read the
* garbage on the disk.
*/
STATIC int /* error (positive) */
xfs_zero_last_block(
struct xfs_inode *ip,
xfs_fsize_t offset,
xfs_fsize_t isize)
{
struct xfs_mount *mp = ip->i_mount;
xfs_fileoff_t last_fsb = XFS_B_TO_FSBT(mp, isize);
int zero_offset = XFS_B_FSB_OFFSET(mp, isize);
int zero_len;
int nimaps = 1;
int error = 0;
struct xfs_bmbt_irec imap;
xfs_ilock(ip, XFS_ILOCK_EXCL);
error = xfs_bmapi_read(ip, last_fsb, 1, &imap, &nimaps, 0);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
if (error)
return error;
ASSERT(nimaps > 0);
/*
* If the block underlying isize is just a hole, then there
* is nothing to zero.
*/
if (imap.br_startblock == HOLESTARTBLOCK)
return 0;
zero_len = mp->m_sb.sb_blocksize - zero_offset;
if (isize + zero_len > offset)
zero_len = offset - isize;
return xfs_iozero(ip, isize, zero_len);
}
/*
* Zero any on disk space between the current EOF and the new, larger EOF.
*
* This handles the normal case of zeroing the remainder of the last block in
* the file and the unusual case of zeroing blocks out beyond the size of the
* file. This second case only happens with fixed size extents and when the
* system crashes before the inode size was updated but after blocks were
* allocated.
*
* Expects the iolock to be held exclusive, and will take the ilock internally.
*/
int /* error (positive) */
xfs_zero_eof(
struct xfs_inode *ip,
xfs_off_t offset, /* starting I/O offset */
xfs_fsize_t isize) /* current inode size */
{
struct xfs_mount *mp = ip->i_mount;
xfs_fileoff_t start_zero_fsb;
xfs_fileoff_t end_zero_fsb;
xfs_fileoff_t zero_count_fsb;
xfs_fileoff_t last_fsb;
xfs_fileoff_t zero_off;
xfs_fsize_t zero_len;
int nimaps;
int error = 0;
struct xfs_bmbt_irec imap;
ASSERT(xfs_isilocked(ip, XFS_IOLOCK_EXCL));
ASSERT(offset > isize);
/*
* First handle zeroing the block on which isize resides.
*
* We only zero a part of that block so it is handled specially.
*/
if (XFS_B_FSB_OFFSET(mp, isize) != 0) {
error = xfs_zero_last_block(ip, offset, isize);
if (error)
return error;
}
/*
* Calculate the range between the new size and the old where blocks
* needing to be zeroed may exist.
*
* To get the block where the last byte in the file currently resides,
* we need to subtract one from the size and truncate back to a block
* boundary. We subtract 1 in case the size is exactly on a block
* boundary.
*/
last_fsb = isize ? XFS_B_TO_FSBT(mp, isize - 1) : (xfs_fileoff_t)-1;
start_zero_fsb = XFS_B_TO_FSB(mp, (xfs_ufsize_t)isize);
end_zero_fsb = XFS_B_TO_FSBT(mp, offset - 1);
ASSERT((xfs_sfiloff_t)last_fsb < (xfs_sfiloff_t)start_zero_fsb);
if (last_fsb == end_zero_fsb) {
/*
* The size was only incremented on its last block.
* We took care of that above, so just return.
*/
return 0;
}
ASSERT(start_zero_fsb <= end_zero_fsb);
while (start_zero_fsb <= end_zero_fsb) {
nimaps = 1;
zero_count_fsb = end_zero_fsb - start_zero_fsb + 1;
xfs_ilock(ip, XFS_ILOCK_EXCL);
error = xfs_bmapi_read(ip, start_zero_fsb, zero_count_fsb,
&imap, &nimaps, 0);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
if (error)
return error;
ASSERT(nimaps > 0);
if (imap.br_state == XFS_EXT_UNWRITTEN ||
imap.br_startblock == HOLESTARTBLOCK) {
start_zero_fsb = imap.br_startoff + imap.br_blockcount;
ASSERT(start_zero_fsb <= (end_zero_fsb + 1));
continue;
}
/*
* There are blocks we need to zero.
*/
zero_off = XFS_FSB_TO_B(mp, start_zero_fsb);
zero_len = XFS_FSB_TO_B(mp, imap.br_blockcount);
if ((zero_off + zero_len) > offset)
zero_len = offset - zero_off;
error = xfs_iozero(ip, zero_off, zero_len);
if (error)
return error;
start_zero_fsb = imap.br_startoff + imap.br_blockcount;
ASSERT(start_zero_fsb <= (end_zero_fsb + 1));
}
return 0;
}
/*
* Common pre-write limit and setup checks.
*
* Called with the iolocked held either shared and exclusive according to
* @iolock, and returns with it held. Might upgrade the iolock to exclusive
* if called for a direct write beyond i_size.
*/
STATIC ssize_t
xfs_file_aio_write_checks(
struct file *file,
loff_t *pos,
size_t *count,
int *iolock)
{
struct inode *inode = file->f_mapping->host;
struct xfs_inode *ip = XFS_I(inode);
int error = 0;
xfs: don't serialise adjacent concurrent direct IO appending writes For append write workloads, extending the file requires a certain amount of exclusive locking to be done up front to ensure sanity in things like ensuring that we've zeroed any allocated regions between the old EOF and the start of the new IO. For single threads, this typically isn't a problem, and for large IOs we don't serialise enough for it to be a problem for two threads on really fast block devices. However for smaller IO and larger thread counts we have a problem. Take 4 concurrent sequential, single block sized and aligned IOs. After the first IO is submitted but before it completes, we end up with this state: IO 1 IO 2 IO 3 IO 4 +-------+-------+-------+-------+ ^ ^ | | | | | | | \- ip->i_new_size \- ip->i_size And the IO is done without exclusive locking because offset <= ip->i_size. When we submit IO 2, we see offset > ip->i_size, and grab the IO lock exclusive, because there is a chance we need to do EOF zeroing. However, there is already an IO in progress that avoids the need for IO zeroing because offset <= ip->i_new_size. hence we could avoid holding the IO lock exlcusive for this. Hence after submission of the second IO, we'd end up this state: IO 1 IO 2 IO 3 IO 4 +-------+-------+-------+-------+ ^ ^ | | | | | | | \- ip->i_new_size \- ip->i_size There is no need to grab the i_mutex of the IO lock in exclusive mode if we don't need to invalidate the page cache. Taking these locks on every direct IO effective serialises them as taking the IO lock in exclusive mode has to wait for all shared holders to drop the lock. That only happens when IO is complete, so effective it prevents dispatch of concurrent direct IO writes to the same inode. And so you can see that for the third concurrent IO, we'd avoid exclusive locking for the same reason we avoided the exclusive lock for the second IO. Fixing this is a bit more complex than that, because we need to hold a write-submission local value of ip->i_new_size to that clearing the value is only done if no other thread has updated it before our IO completes..... Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2011-08-25 11:17:02 +04:00
restart:
error = generic_write_checks(file, pos, count, S_ISBLK(inode->i_mode));
if (error)
return error;
/*
* If the offset is beyond the size of the file, we need to zero any
* blocks that fall between the existing EOF and the start of this
* write. If zeroing is needed and we are currently holding the
* iolock shared, we need to update it to exclusive which implies
* having to redo all checks before.
*/
if (*pos > i_size_read(inode)) {
xfs: don't serialise adjacent concurrent direct IO appending writes For append write workloads, extending the file requires a certain amount of exclusive locking to be done up front to ensure sanity in things like ensuring that we've zeroed any allocated regions between the old EOF and the start of the new IO. For single threads, this typically isn't a problem, and for large IOs we don't serialise enough for it to be a problem for two threads on really fast block devices. However for smaller IO and larger thread counts we have a problem. Take 4 concurrent sequential, single block sized and aligned IOs. After the first IO is submitted but before it completes, we end up with this state: IO 1 IO 2 IO 3 IO 4 +-------+-------+-------+-------+ ^ ^ | | | | | | | \- ip->i_new_size \- ip->i_size And the IO is done without exclusive locking because offset <= ip->i_size. When we submit IO 2, we see offset > ip->i_size, and grab the IO lock exclusive, because there is a chance we need to do EOF zeroing. However, there is already an IO in progress that avoids the need for IO zeroing because offset <= ip->i_new_size. hence we could avoid holding the IO lock exlcusive for this. Hence after submission of the second IO, we'd end up this state: IO 1 IO 2 IO 3 IO 4 +-------+-------+-------+-------+ ^ ^ | | | | | | | \- ip->i_new_size \- ip->i_size There is no need to grab the i_mutex of the IO lock in exclusive mode if we don't need to invalidate the page cache. Taking these locks on every direct IO effective serialises them as taking the IO lock in exclusive mode has to wait for all shared holders to drop the lock. That only happens when IO is complete, so effective it prevents dispatch of concurrent direct IO writes to the same inode. And so you can see that for the third concurrent IO, we'd avoid exclusive locking for the same reason we avoided the exclusive lock for the second IO. Fixing this is a bit more complex than that, because we need to hold a write-submission local value of ip->i_new_size to that clearing the value is only done if no other thread has updated it before our IO completes..... Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2011-08-25 11:17:02 +04:00
if (*iolock == XFS_IOLOCK_SHARED) {
xfs_rw_iunlock(ip, *iolock);
xfs: don't serialise adjacent concurrent direct IO appending writes For append write workloads, extending the file requires a certain amount of exclusive locking to be done up front to ensure sanity in things like ensuring that we've zeroed any allocated regions between the old EOF and the start of the new IO. For single threads, this typically isn't a problem, and for large IOs we don't serialise enough for it to be a problem for two threads on really fast block devices. However for smaller IO and larger thread counts we have a problem. Take 4 concurrent sequential, single block sized and aligned IOs. After the first IO is submitted but before it completes, we end up with this state: IO 1 IO 2 IO 3 IO 4 +-------+-------+-------+-------+ ^ ^ | | | | | | | \- ip->i_new_size \- ip->i_size And the IO is done without exclusive locking because offset <= ip->i_size. When we submit IO 2, we see offset > ip->i_size, and grab the IO lock exclusive, because there is a chance we need to do EOF zeroing. However, there is already an IO in progress that avoids the need for IO zeroing because offset <= ip->i_new_size. hence we could avoid holding the IO lock exlcusive for this. Hence after submission of the second IO, we'd end up this state: IO 1 IO 2 IO 3 IO 4 +-------+-------+-------+-------+ ^ ^ | | | | | | | \- ip->i_new_size \- ip->i_size There is no need to grab the i_mutex of the IO lock in exclusive mode if we don't need to invalidate the page cache. Taking these locks on every direct IO effective serialises them as taking the IO lock in exclusive mode has to wait for all shared holders to drop the lock. That only happens when IO is complete, so effective it prevents dispatch of concurrent direct IO writes to the same inode. And so you can see that for the third concurrent IO, we'd avoid exclusive locking for the same reason we avoided the exclusive lock for the second IO. Fixing this is a bit more complex than that, because we need to hold a write-submission local value of ip->i_new_size to that clearing the value is only done if no other thread has updated it before our IO completes..... Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2011-08-25 11:17:02 +04:00
*iolock = XFS_IOLOCK_EXCL;
xfs_rw_ilock(ip, *iolock);
xfs: don't serialise adjacent concurrent direct IO appending writes For append write workloads, extending the file requires a certain amount of exclusive locking to be done up front to ensure sanity in things like ensuring that we've zeroed any allocated regions between the old EOF and the start of the new IO. For single threads, this typically isn't a problem, and for large IOs we don't serialise enough for it to be a problem for two threads on really fast block devices. However for smaller IO and larger thread counts we have a problem. Take 4 concurrent sequential, single block sized and aligned IOs. After the first IO is submitted but before it completes, we end up with this state: IO 1 IO 2 IO 3 IO 4 +-------+-------+-------+-------+ ^ ^ | | | | | | | \- ip->i_new_size \- ip->i_size And the IO is done without exclusive locking because offset <= ip->i_size. When we submit IO 2, we see offset > ip->i_size, and grab the IO lock exclusive, because there is a chance we need to do EOF zeroing. However, there is already an IO in progress that avoids the need for IO zeroing because offset <= ip->i_new_size. hence we could avoid holding the IO lock exlcusive for this. Hence after submission of the second IO, we'd end up this state: IO 1 IO 2 IO 3 IO 4 +-------+-------+-------+-------+ ^ ^ | | | | | | | \- ip->i_new_size \- ip->i_size There is no need to grab the i_mutex of the IO lock in exclusive mode if we don't need to invalidate the page cache. Taking these locks on every direct IO effective serialises them as taking the IO lock in exclusive mode has to wait for all shared holders to drop the lock. That only happens when IO is complete, so effective it prevents dispatch of concurrent direct IO writes to the same inode. And so you can see that for the third concurrent IO, we'd avoid exclusive locking for the same reason we avoided the exclusive lock for the second IO. Fixing this is a bit more complex than that, because we need to hold a write-submission local value of ip->i_new_size to that clearing the value is only done if no other thread has updated it before our IO completes..... Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2011-08-25 11:17:02 +04:00
goto restart;
}
error = xfs_zero_eof(ip, *pos, i_size_read(inode));
if (error)
return error;
xfs: don't serialise adjacent concurrent direct IO appending writes For append write workloads, extending the file requires a certain amount of exclusive locking to be done up front to ensure sanity in things like ensuring that we've zeroed any allocated regions between the old EOF and the start of the new IO. For single threads, this typically isn't a problem, and for large IOs we don't serialise enough for it to be a problem for two threads on really fast block devices. However for smaller IO and larger thread counts we have a problem. Take 4 concurrent sequential, single block sized and aligned IOs. After the first IO is submitted but before it completes, we end up with this state: IO 1 IO 2 IO 3 IO 4 +-------+-------+-------+-------+ ^ ^ | | | | | | | \- ip->i_new_size \- ip->i_size And the IO is done without exclusive locking because offset <= ip->i_size. When we submit IO 2, we see offset > ip->i_size, and grab the IO lock exclusive, because there is a chance we need to do EOF zeroing. However, there is already an IO in progress that avoids the need for IO zeroing because offset <= ip->i_new_size. hence we could avoid holding the IO lock exlcusive for this. Hence after submission of the second IO, we'd end up this state: IO 1 IO 2 IO 3 IO 4 +-------+-------+-------+-------+ ^ ^ | | | | | | | \- ip->i_new_size \- ip->i_size There is no need to grab the i_mutex of the IO lock in exclusive mode if we don't need to invalidate the page cache. Taking these locks on every direct IO effective serialises them as taking the IO lock in exclusive mode has to wait for all shared holders to drop the lock. That only happens when IO is complete, so effective it prevents dispatch of concurrent direct IO writes to the same inode. And so you can see that for the third concurrent IO, we'd avoid exclusive locking for the same reason we avoided the exclusive lock for the second IO. Fixing this is a bit more complex than that, because we need to hold a write-submission local value of ip->i_new_size to that clearing the value is only done if no other thread has updated it before our IO completes..... Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2011-08-25 11:17:02 +04:00
}
/*
* Updating the timestamps will grab the ilock again from
* xfs_fs_dirty_inode, so we have to call it after dropping the
* lock above. Eventually we should look into a way to avoid
* the pointless lock roundtrip.
*/
if (likely(!(file->f_mode & FMODE_NOCMTIME))) {
error = file_update_time(file);
if (error)
return error;
}
/*
* If we're writing the file then make sure to clear the setuid and
* setgid bits if the process is not being run by root. This keeps
* people from modifying setuid and setgid binaries.
*/
return file_remove_suid(file);
}
/*
* xfs_file_dio_aio_write - handle direct IO writes
*
* Lock the inode appropriately to prepare for and issue a direct IO write.
* By separating it from the buffered write path we remove all the tricky to
* follow locking changes and looping.
*
* If there are cached pages or we're extending the file, we need IOLOCK_EXCL
* until we're sure the bytes at the new EOF have been zeroed and/or the cached
* pages are flushed out.
*
* In most cases the direct IO writes will be done holding IOLOCK_SHARED
* allowing them to be done in parallel with reads and other direct IO writes.
* However, if the IO is not aligned to filesystem blocks, the direct IO layer
* needs to do sub-block zeroing and that requires serialisation against other
* direct IOs to the same block. In this case we need to serialise the
* submission of the unaligned IOs so that we don't get racing block zeroing in
* the dio layer. To avoid the problem with aio, we also need to wait for
* outstanding IOs to complete so that unwritten extent conversion is completed
* before we try to map the overlapping block. This is currently implemented by
* hitting it with a big hammer (i.e. inode_dio_wait()).
*
* Returns with locks held indicated by @iolock and errors indicated by
* negative return values.
*/
STATIC ssize_t
xfs_file_dio_aio_write(
struct kiocb *iocb,
struct iov_iter *from)
{
struct file *file = iocb->ki_filp;
struct address_space *mapping = file->f_mapping;
struct inode *inode = mapping->host;
struct xfs_inode *ip = XFS_I(inode);
struct xfs_mount *mp = ip->i_mount;
ssize_t ret = 0;
int unaligned_io = 0;
int iolock;
size_t count = iov_iter_count(from);
loff_t pos = iocb->ki_pos;
struct xfs_buftarg *target = XFS_IS_REALTIME_INODE(ip) ?
mp->m_rtdev_targp : mp->m_ddev_targp;
xfs: allow logical-sector sized O_DIRECT Some time ago, mkfs.xfs started picking the storage physical sector size as the default filesystem "sector size" in order to avoid RMW costs incurred by doing IOs at logical sector size alignments. However, this means that for a filesystem made with i.e. a 4k sector size on an "advanced format" 4k/512 disk, 512-byte direct IOs are no longer allowed. This means that XFS has essentially turned this AF drive into a hard 4K device, from the filesystem on up. XFS's mkfs-specified "sector size" is really just controlling the minimum size & alignment of filesystem metadata. There is no real need to tightly couple XFS's minimal metadata size to the minimum allowed direct IO size; XFS can continue doing metadata in optimal sizes, but still allow smaller DIOs for apps which issue them, for whatever reason. This patch adds a new field to the xfs_buftarg, so that we now track 2 sizes: 1) The metadata sector size, which is the minimum unit and alignment of IO which will be performed by metadata operations. 2) The device logical sector size The first is used internally by the file system for metadata alignment and IOs. The second is used for the minimum allowed direct IO alignment. This has passed xfstests on filesystems made with 4k sectors, including when run under the patch I sent to ignore XFS_IOC_DIOINFO, and issue 512 DIOs anyway. I also directly tested end of block behavior on preallocated, sparse, and existing files when we do a 512 IO into a 4k file on a 4k-sector filesystem, to be sure there were no unexpected behaviors. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2014-01-22 02:46:23 +04:00
/* DIO must be aligned to device logical sector size */
if ((pos | count) & target->bt_logical_sectormask)
return -EINVAL;
xfs: allow logical-sector sized O_DIRECT Some time ago, mkfs.xfs started picking the storage physical sector size as the default filesystem "sector size" in order to avoid RMW costs incurred by doing IOs at logical sector size alignments. However, this means that for a filesystem made with i.e. a 4k sector size on an "advanced format" 4k/512 disk, 512-byte direct IOs are no longer allowed. This means that XFS has essentially turned this AF drive into a hard 4K device, from the filesystem on up. XFS's mkfs-specified "sector size" is really just controlling the minimum size & alignment of filesystem metadata. There is no real need to tightly couple XFS's minimal metadata size to the minimum allowed direct IO size; XFS can continue doing metadata in optimal sizes, but still allow smaller DIOs for apps which issue them, for whatever reason. This patch adds a new field to the xfs_buftarg, so that we now track 2 sizes: 1) The metadata sector size, which is the minimum unit and alignment of IO which will be performed by metadata operations. 2) The device logical sector size The first is used internally by the file system for metadata alignment and IOs. The second is used for the minimum allowed direct IO alignment. This has passed xfstests on filesystems made with 4k sectors, including when run under the patch I sent to ignore XFS_IOC_DIOINFO, and issue 512 DIOs anyway. I also directly tested end of block behavior on preallocated, sparse, and existing files when we do a 512 IO into a 4k file on a 4k-sector filesystem, to be sure there were no unexpected behaviors. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2014-01-22 02:46:23 +04:00
/* "unaligned" here means not aligned to a filesystem block */
if ((pos & mp->m_blockmask) || ((pos + count) & mp->m_blockmask))
unaligned_io = 1;
xfs: don't serialise adjacent concurrent direct IO appending writes For append write workloads, extending the file requires a certain amount of exclusive locking to be done up front to ensure sanity in things like ensuring that we've zeroed any allocated regions between the old EOF and the start of the new IO. For single threads, this typically isn't a problem, and for large IOs we don't serialise enough for it to be a problem for two threads on really fast block devices. However for smaller IO and larger thread counts we have a problem. Take 4 concurrent sequential, single block sized and aligned IOs. After the first IO is submitted but before it completes, we end up with this state: IO 1 IO 2 IO 3 IO 4 +-------+-------+-------+-------+ ^ ^ | | | | | | | \- ip->i_new_size \- ip->i_size And the IO is done without exclusive locking because offset <= ip->i_size. When we submit IO 2, we see offset > ip->i_size, and grab the IO lock exclusive, because there is a chance we need to do EOF zeroing. However, there is already an IO in progress that avoids the need for IO zeroing because offset <= ip->i_new_size. hence we could avoid holding the IO lock exlcusive for this. Hence after submission of the second IO, we'd end up this state: IO 1 IO 2 IO 3 IO 4 +-------+-------+-------+-------+ ^ ^ | | | | | | | \- ip->i_new_size \- ip->i_size There is no need to grab the i_mutex of the IO lock in exclusive mode if we don't need to invalidate the page cache. Taking these locks on every direct IO effective serialises them as taking the IO lock in exclusive mode has to wait for all shared holders to drop the lock. That only happens when IO is complete, so effective it prevents dispatch of concurrent direct IO writes to the same inode. And so you can see that for the third concurrent IO, we'd avoid exclusive locking for the same reason we avoided the exclusive lock for the second IO. Fixing this is a bit more complex than that, because we need to hold a write-submission local value of ip->i_new_size to that clearing the value is only done if no other thread has updated it before our IO completes..... Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2011-08-25 11:17:02 +04:00
/*
* We don't need to take an exclusive lock unless there page cache needs
* to be invalidated or unaligned IO is being executed. We don't need to
* consider the EOF extension case here because
* xfs_file_aio_write_checks() will relock the inode as necessary for
* EOF zeroing cases and fill out the new inode size as appropriate.
*/
if (unaligned_io || mapping->nrpages)
iolock = XFS_IOLOCK_EXCL;
else
iolock = XFS_IOLOCK_SHARED;
xfs_rw_ilock(ip, iolock);
/*
* Recheck if there are cached pages that need invalidate after we got
* the iolock to protect against other threads adding new pages while
* we were waiting for the iolock.
*/
if (mapping->nrpages && iolock == XFS_IOLOCK_SHARED) {
xfs_rw_iunlock(ip, iolock);
iolock = XFS_IOLOCK_EXCL;
xfs_rw_ilock(ip, iolock);
}
ret = xfs_file_aio_write_checks(file, &pos, &count, &iolock);
if (ret)
goto out;
iov_iter_truncate(from, count);
if (mapping->nrpages) {
ret = filemap_write_and_wait_range(VFS_I(ip)->i_mapping,
pos, pos + count - 1);
if (ret)
goto out;
/*
* Invalidate whole pages. This can return an error if
* we fail to invalidate a page, but this should never
* happen on XFS. Warn if it does fail.
*/
ret = invalidate_inode_pages2_range(VFS_I(ip)->i_mapping,
pos >> PAGE_CACHE_SHIFT,
(pos + count - 1) >> PAGE_CACHE_SHIFT);
WARN_ON_ONCE(ret);
ret = 0;
}
/*
* If we are doing unaligned IO, wait for all other IO to drain,
* otherwise demote the lock if we had to flush cached pages
*/
if (unaligned_io)
inode_dio_wait(inode);
else if (iolock == XFS_IOLOCK_EXCL) {
xfs_rw_ilock_demote(ip, XFS_IOLOCK_EXCL);
iolock = XFS_IOLOCK_SHARED;
}
trace_xfs_file_direct_write(ip, count, iocb->ki_pos, 0);
ret = generic_file_direct_write(iocb, from, pos);
out:
xfs_rw_iunlock(ip, iolock);
/* No fallback to buffered IO on errors for XFS. */
ASSERT(ret < 0 || ret == count);
return ret;
}
STATIC ssize_t
xfs_file_buffered_aio_write(
struct kiocb *iocb,
struct iov_iter *from)
{
struct file *file = iocb->ki_filp;
struct address_space *mapping = file->f_mapping;
struct inode *inode = mapping->host;
struct xfs_inode *ip = XFS_I(inode);
ssize_t ret;
int enospc = 0;
int iolock = XFS_IOLOCK_EXCL;
loff_t pos = iocb->ki_pos;
size_t count = iov_iter_count(from);
xfs_rw_ilock(ip, iolock);
ret = xfs_file_aio_write_checks(file, &pos, &count, &iolock);
if (ret)
goto out;
iov_iter_truncate(from, count);
/* We can write back this queue in page reclaim */
current->backing_dev_info = mapping->backing_dev_info;
write_retry:
trace_xfs_file_buffered_write(ip, count, iocb->ki_pos, 0);
ret = generic_perform_write(file, from, pos);
if (likely(ret >= 0))
iocb->ki_pos = pos + ret;
xfs: run an eofblocks scan on ENOSPC/EDQUOT From: Brian Foster <bfoster@redhat.com> Speculative preallocation and and the associated throttling metrics assume we're working with large files on large filesystems. Users have reported inefficiencies in these mechanisms when we happen to be dealing with large files on smaller filesystems. This can occur because while prealloc throttling is aggressive under low free space conditions, it is not active until we reach 5% free space or less. For example, a 40GB filesystem has enough space for several files large enough to have multi-GB preallocations at any given time. If those files are slow growing, they might reserve preallocation for long periods of time as well as avoid the background scanner due to frequent modification. If a new file is written under these conditions, said file has no access to this already reserved space and premature ENOSPC is imminent. To handle this scenario, modify the buffered write ENOSPC handling and retry sequence to invoke an eofblocks scan. In the smaller filesystem scenario, the eofblocks scan resets the usage of preallocation such that when the 5% free space threshold is met, throttling effectively takes over to provide fair and efficient preallocation until legitimate ENOSPC. The eofblocks scan is selective based on the nature of the failure. For example, an EDQUOT failure in a particular quota will use a filtered scan for that quota. Because we don't know which quota might have caused an allocation failure at any given time, we include each applicable quota determined to be under low free space conditions in the scan. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-07-24 13:49:28 +04:00
/*
xfs: run an eofblocks scan on ENOSPC/EDQUOT From: Brian Foster <bfoster@redhat.com> Speculative preallocation and and the associated throttling metrics assume we're working with large files on large filesystems. Users have reported inefficiencies in these mechanisms when we happen to be dealing with large files on smaller filesystems. This can occur because while prealloc throttling is aggressive under low free space conditions, it is not active until we reach 5% free space or less. For example, a 40GB filesystem has enough space for several files large enough to have multi-GB preallocations at any given time. If those files are slow growing, they might reserve preallocation for long periods of time as well as avoid the background scanner due to frequent modification. If a new file is written under these conditions, said file has no access to this already reserved space and premature ENOSPC is imminent. To handle this scenario, modify the buffered write ENOSPC handling and retry sequence to invoke an eofblocks scan. In the smaller filesystem scenario, the eofblocks scan resets the usage of preallocation such that when the 5% free space threshold is met, throttling effectively takes over to provide fair and efficient preallocation until legitimate ENOSPC. The eofblocks scan is selective based on the nature of the failure. For example, an EDQUOT failure in a particular quota will use a filtered scan for that quota. Because we don't know which quota might have caused an allocation failure at any given time, we include each applicable quota determined to be under low free space conditions in the scan. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-07-24 13:49:28 +04:00
* If we hit a space limit, try to free up some lingering preallocated
* space before returning an error. In the case of ENOSPC, first try to
* write back all dirty inodes to free up some of the excess reserved
* metadata space. This reduces the chances that the eofblocks scan
* waits on dirty mappings. Since xfs_flush_inodes() is serialized, this
* also behaves as a filter to prevent too many eofblocks scans from
* running at the same time.
*/
xfs: run an eofblocks scan on ENOSPC/EDQUOT From: Brian Foster <bfoster@redhat.com> Speculative preallocation and and the associated throttling metrics assume we're working with large files on large filesystems. Users have reported inefficiencies in these mechanisms when we happen to be dealing with large files on smaller filesystems. This can occur because while prealloc throttling is aggressive under low free space conditions, it is not active until we reach 5% free space or less. For example, a 40GB filesystem has enough space for several files large enough to have multi-GB preallocations at any given time. If those files are slow growing, they might reserve preallocation for long periods of time as well as avoid the background scanner due to frequent modification. If a new file is written under these conditions, said file has no access to this already reserved space and premature ENOSPC is imminent. To handle this scenario, modify the buffered write ENOSPC handling and retry sequence to invoke an eofblocks scan. In the smaller filesystem scenario, the eofblocks scan resets the usage of preallocation such that when the 5% free space threshold is met, throttling effectively takes over to provide fair and efficient preallocation until legitimate ENOSPC. The eofblocks scan is selective based on the nature of the failure. For example, an EDQUOT failure in a particular quota will use a filtered scan for that quota. Because we don't know which quota might have caused an allocation failure at any given time, we include each applicable quota determined to be under low free space conditions in the scan. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-07-24 13:49:28 +04:00
if (ret == -EDQUOT && !enospc) {
enospc = xfs_inode_free_quota_eofblocks(ip);
if (enospc)
goto write_retry;
} else if (ret == -ENOSPC && !enospc) {
struct xfs_eofblocks eofb = {0};
enospc = 1;
xfs: xfs_sync_data is redundant. We don't do any data writeback from XFS any more - the VFS is completely responsible for that, including for freeze. We can replace the remaining caller with a VFS level function that achieves the same thing, but without conflicting with current writeback work. This means we can remove the flush_work and xfs_flush_inodes() - the VFS functionality completely replaces the internal flush queue for doing this writeback work in a separate context to avoid stack overruns. This does have one complication - it cannot be called with page locks held. Hence move the flushing of delalloc space when ENOSPC occurs back up into xfs_file_aio_buffered_write when we don't hold any locks that will stall writeback. Unfortunately, writeback_inodes_sb_if_idle() is not sufficient to trigger delalloc conversion fast enough to prevent spurious ENOSPC whent here are hundreds of writers, thousands of small files and GBs of free RAM. Hence we need to use sync_sb_inodes() to block callers while we wait for writeback like the previous xfs_flush_inodes implementation did. That means we have to hold the s_umount lock here, but because this call can nest inside i_mutex (the parent directory in the create case, held by the VFS), we have to use down_read_trylock() to avoid potential deadlocks. In practice, this trylock will succeed on almost every attempt as unmount/remount type operations are exceedingly rare. Note: we always need to pass a count of zero to generic_file_buffered_write() as the previously written byte count. We only do this by accident before this patch by the virtue of ret always being zero when there are no errors. Make this explicit rather than needing to specifically zero ret in the ENOSPC retry case. Signed-off-by: Dave Chinner <dchinner@redhat.com> Tested-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-08 14:56:04 +04:00
xfs_flush_inodes(ip->i_mount);
xfs: run an eofblocks scan on ENOSPC/EDQUOT From: Brian Foster <bfoster@redhat.com> Speculative preallocation and and the associated throttling metrics assume we're working with large files on large filesystems. Users have reported inefficiencies in these mechanisms when we happen to be dealing with large files on smaller filesystems. This can occur because while prealloc throttling is aggressive under low free space conditions, it is not active until we reach 5% free space or less. For example, a 40GB filesystem has enough space for several files large enough to have multi-GB preallocations at any given time. If those files are slow growing, they might reserve preallocation for long periods of time as well as avoid the background scanner due to frequent modification. If a new file is written under these conditions, said file has no access to this already reserved space and premature ENOSPC is imminent. To handle this scenario, modify the buffered write ENOSPC handling and retry sequence to invoke an eofblocks scan. In the smaller filesystem scenario, the eofblocks scan resets the usage of preallocation such that when the 5% free space threshold is met, throttling effectively takes over to provide fair and efficient preallocation until legitimate ENOSPC. The eofblocks scan is selective based on the nature of the failure. For example, an EDQUOT failure in a particular quota will use a filtered scan for that quota. Because we don't know which quota might have caused an allocation failure at any given time, we include each applicable quota determined to be under low free space conditions in the scan. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-07-24 13:49:28 +04:00
eofb.eof_scan_owner = ip->i_ino; /* for locking */
eofb.eof_flags = XFS_EOF_FLAGS_SYNC;
xfs_icache_free_eofblocks(ip->i_mount, &eofb);
xfs: xfs_sync_data is redundant. We don't do any data writeback from XFS any more - the VFS is completely responsible for that, including for freeze. We can replace the remaining caller with a VFS level function that achieves the same thing, but without conflicting with current writeback work. This means we can remove the flush_work and xfs_flush_inodes() - the VFS functionality completely replaces the internal flush queue for doing this writeback work in a separate context to avoid stack overruns. This does have one complication - it cannot be called with page locks held. Hence move the flushing of delalloc space when ENOSPC occurs back up into xfs_file_aio_buffered_write when we don't hold any locks that will stall writeback. Unfortunately, writeback_inodes_sb_if_idle() is not sufficient to trigger delalloc conversion fast enough to prevent spurious ENOSPC whent here are hundreds of writers, thousands of small files and GBs of free RAM. Hence we need to use sync_sb_inodes() to block callers while we wait for writeback like the previous xfs_flush_inodes implementation did. That means we have to hold the s_umount lock here, but because this call can nest inside i_mutex (the parent directory in the create case, held by the VFS), we have to use down_read_trylock() to avoid potential deadlocks. In practice, this trylock will succeed on almost every attempt as unmount/remount type operations are exceedingly rare. Note: we always need to pass a count of zero to generic_file_buffered_write() as the previously written byte count. We only do this by accident before this patch by the virtue of ret always being zero when there are no errors. Make this explicit rather than needing to specifically zero ret in the ENOSPC retry case. Signed-off-by: Dave Chinner <dchinner@redhat.com> Tested-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-08 14:56:04 +04:00
goto write_retry;
}
current->backing_dev_info = NULL;
out:
xfs_rw_iunlock(ip, iolock);
return ret;
}
STATIC ssize_t
xfs_file_write_iter(
struct kiocb *iocb,
struct iov_iter *from)
{
struct file *file = iocb->ki_filp;
struct address_space *mapping = file->f_mapping;
struct inode *inode = mapping->host;
struct xfs_inode *ip = XFS_I(inode);
ssize_t ret;
size_t ocount = iov_iter_count(from);
XFS_STATS_INC(xs_write_calls);
if (ocount == 0)
return 0;
if (XFS_FORCED_SHUTDOWN(ip->i_mount))
return -EIO;
if (unlikely(file->f_flags & O_DIRECT))
ret = xfs_file_dio_aio_write(iocb, from);
else
ret = xfs_file_buffered_aio_write(iocb, from);
if (ret > 0) {
ssize_t err;
XFS_STATS_ADD(xs_write_bytes, ret);
/* Handle various SYNC-type writes */
err = generic_write_sync(file, iocb->ki_pos - ret, ret);
if (err < 0)
ret = err;
}
return ret;
}
STATIC long
xfs_file_fallocate(
struct file *file,
int mode,
loff_t offset,
loff_t len)
{
struct inode *inode = file_inode(file);
struct xfs_inode *ip = XFS_I(inode);
struct xfs_trans *tp;
long error;
loff_t new_size = 0;
if (!S_ISREG(inode->i_mode))
return -EINVAL;
if (mode & ~(FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE |
FALLOC_FL_COLLAPSE_RANGE | FALLOC_FL_ZERO_RANGE))
return -EOPNOTSUPP;
xfs_ilock(ip, XFS_IOLOCK_EXCL);
if (mode & FALLOC_FL_PUNCH_HOLE) {
error = xfs_free_file_space(ip, offset, len);
if (error)
goto out_unlock;
} else if (mode & FALLOC_FL_COLLAPSE_RANGE) {
unsigned blksize_mask = (1 << inode->i_blkbits) - 1;
if (offset & blksize_mask || len & blksize_mask) {
error = -EINVAL;
goto out_unlock;
}
/*
* There is no need to overlap collapse range with EOF,
* in which case it is effectively a truncate operation
*/
if (offset + len >= i_size_read(inode)) {
error = -EINVAL;
goto out_unlock;
}
new_size = i_size_read(inode) - len;
error = xfs_collapse_file_space(ip, offset, len);
if (error)
goto out_unlock;
} else {
if (!(mode & FALLOC_FL_KEEP_SIZE) &&
offset + len > i_size_read(inode)) {
new_size = offset + len;
error = inode_newsize_ok(inode, new_size);
if (error)
goto out_unlock;
}
if (mode & FALLOC_FL_ZERO_RANGE)
error = xfs_zero_file_space(ip, offset, len);
else
error = xfs_alloc_file_space(ip, offset, len,
XFS_BMAPI_PREALLOC);
if (error)
goto out_unlock;
}
tp = xfs_trans_alloc(ip->i_mount, XFS_TRANS_WRITEID);
error = xfs_trans_reserve(tp, &M_RES(ip->i_mount)->tr_writeid, 0, 0);
if (error) {
xfs_trans_cancel(tp, 0);
goto out_unlock;
}
xfs_ilock(ip, XFS_ILOCK_EXCL);
xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
ip->i_d.di_mode &= ~S_ISUID;
if (ip->i_d.di_mode & S_IXGRP)
ip->i_d.di_mode &= ~S_ISGID;
if (!(mode & (FALLOC_FL_PUNCH_HOLE | FALLOC_FL_COLLAPSE_RANGE)))
ip->i_d.di_flags |= XFS_DIFLAG_PREALLOC;
xfs_trans_ichgtime(tp, ip, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG);
xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
if (file->f_flags & O_DSYNC)
xfs_trans_set_sync(tp);
error = xfs_trans_commit(tp, 0);
if (error)
goto out_unlock;
/* Change file size if needed */
if (new_size) {
struct iattr iattr;
iattr.ia_valid = ATTR_SIZE;
iattr.ia_size = new_size;
error = xfs_setattr_size(ip, &iattr);
}
out_unlock:
xfs_iunlock(ip, XFS_IOLOCK_EXCL);
return error;
}
STATIC int
xfs_file_open(
struct inode *inode,
struct file *file)
{
if (!(file->f_flags & O_LARGEFILE) && i_size_read(inode) > MAX_NON_LFS)
return -EFBIG;
if (XFS_FORCED_SHUTDOWN(XFS_M(inode->i_sb)))
return -EIO;
return 0;
}
STATIC int
xfs_dir_open(
struct inode *inode,
struct file *file)
{
struct xfs_inode *ip = XFS_I(inode);
int mode;
int error;
error = xfs_file_open(inode, file);
if (error)
return error;
/*
* If there are any blocks, read-ahead block 0 as we're almost
* certain to have the next operation be a read there.
*/
mode = xfs_ilock_data_map_shared(ip);
if (ip->i_d.di_nextents > 0)
xfs_dir3_data_readahead(ip, 0, -1);
xfs_iunlock(ip, mode);
return 0;
}
STATIC int
xfs_file_release(
struct inode *inode,
struct file *filp)
{
return xfs_release(XFS_I(inode));
}
STATIC int
xfs_file_readdir(
struct file *file,
struct dir_context *ctx)
{
struct inode *inode = file_inode(file);
xfs_inode_t *ip = XFS_I(inode);
size_t bufsize;
/*
* The Linux API doesn't pass down the total size of the buffer
* we read into down to the filesystem. With the filldir concept
* it's not needed for correct information, but the XFS dir2 leaf
* code wants an estimate of the buffer size to calculate it's
* readahead window and size the buffers used for mapping to
* physical blocks.
*
* Try to give it an estimate that's good enough, maybe at some
* point we can change the ->readdir prototype to include the
* buffer size. For now we use the current glibc buffer size.
*/
bufsize = (size_t)min_t(loff_t, 32768, ip->i_d.di_size);
return xfs_readdir(ip, ctx, bufsize);
}
STATIC int
xfs_file_mmap(
struct file *filp,
struct vm_area_struct *vma)
{
vma->vm_ops = &xfs_file_vm_ops;
file_accessed(filp);
return 0;
}
/*
* mmap()d file has taken write protection fault and is being made
* writable. We can set the page state up correctly for a writable
* page, which means we can do correct delalloc accounting (ENOSPC
* checking!) and unwritten extent mapping.
*/
STATIC int
xfs_vm_page_mkwrite(
struct vm_area_struct *vma,
struct vm_fault *vmf)
{
return block_page_mkwrite(vma, vmf, xfs_get_blocks);
}
/*
* This type is designed to indicate the type of offset we would like
* to search from page cache for xfs_seek_hole_data().
*/
enum {
HOLE_OFF = 0,
DATA_OFF,
};
/*
* Lookup the desired type of offset from the given page.
*
* On success, return true and the offset argument will point to the
* start of the region that was found. Otherwise this function will
* return false and keep the offset argument unchanged.
*/
STATIC bool
xfs_lookup_buffer_offset(
struct page *page,
loff_t *offset,
unsigned int type)
{
loff_t lastoff = page_offset(page);
bool found = false;
struct buffer_head *bh, *head;
bh = head = page_buffers(page);
do {
/*
* Unwritten extents that have data in the page
* cache covering them can be identified by the
* BH_Unwritten state flag. Pages with multiple
* buffers might have a mix of holes, data and
* unwritten extents - any buffer with valid
* data in it should have BH_Uptodate flag set
* on it.
*/
if (buffer_unwritten(bh) ||
buffer_uptodate(bh)) {
if (type == DATA_OFF)
found = true;
} else {
if (type == HOLE_OFF)
found = true;
}
if (found) {
*offset = lastoff;
break;
}
lastoff += bh->b_size;
} while ((bh = bh->b_this_page) != head);
return found;
}
/*
* This routine is called to find out and return a data or hole offset
* from the page cache for unwritten extents according to the desired
* type for xfs_seek_hole_data().
*
* The argument offset is used to tell where we start to search from the
* page cache. Map is used to figure out the end points of the range to
* lookup pages.
*
* Return true if the desired type of offset was found, and the argument
* offset is filled with that address. Otherwise, return false and keep
* offset unchanged.
*/
STATIC bool
xfs_find_get_desired_pgoff(
struct inode *inode,
struct xfs_bmbt_irec *map,
unsigned int type,
loff_t *offset)
{
struct xfs_inode *ip = XFS_I(inode);
struct xfs_mount *mp = ip->i_mount;
struct pagevec pvec;
pgoff_t index;
pgoff_t end;
loff_t endoff;
loff_t startoff = *offset;
loff_t lastoff = startoff;
bool found = false;
pagevec_init(&pvec, 0);
index = startoff >> PAGE_CACHE_SHIFT;
endoff = XFS_FSB_TO_B(mp, map->br_startoff + map->br_blockcount);
end = endoff >> PAGE_CACHE_SHIFT;
do {
int want;
unsigned nr_pages;
unsigned int i;
want = min_t(pgoff_t, end - index, PAGEVEC_SIZE);
nr_pages = pagevec_lookup(&pvec, inode->i_mapping, index,
want);
/*
* No page mapped into given range. If we are searching holes
* and if this is the first time we got into the loop, it means
* that the given offset is landed in a hole, return it.
*
* If we have already stepped through some block buffers to find
* holes but they all contains data. In this case, the last
* offset is already updated and pointed to the end of the last
* mapped page, if it does not reach the endpoint to search,
* that means there should be a hole between them.
*/
if (nr_pages == 0) {
/* Data search found nothing */
if (type == DATA_OFF)
break;
ASSERT(type == HOLE_OFF);
if (lastoff == startoff || lastoff < endoff) {
found = true;
*offset = lastoff;
}
break;
}
/*
* At lease we found one page. If this is the first time we
* step into the loop, and if the first page index offset is
* greater than the given search offset, a hole was found.
*/
if (type == HOLE_OFF && lastoff == startoff &&
lastoff < page_offset(pvec.pages[0])) {
found = true;
break;
}
for (i = 0; i < nr_pages; i++) {
struct page *page = pvec.pages[i];
loff_t b_offset;
/*
* At this point, the page may be truncated or
* invalidated (changing page->mapping to NULL),
* or even swizzled back from swapper_space to tmpfs
* file mapping. However, page->index will not change
* because we have a reference on the page.
*
* Searching done if the page index is out of range.
* If the current offset is not reaches the end of
* the specified search range, there should be a hole
* between them.
*/
if (page->index > end) {
if (type == HOLE_OFF && lastoff < endoff) {
*offset = lastoff;
found = true;
}
goto out;
}
lock_page(page);
/*
* Page truncated or invalidated(page->mapping == NULL).
* We can freely skip it and proceed to check the next
* page.
*/
if (unlikely(page->mapping != inode->i_mapping)) {
unlock_page(page);
continue;
}
if (!page_has_buffers(page)) {
unlock_page(page);
continue;
}
found = xfs_lookup_buffer_offset(page, &b_offset, type);
if (found) {
/*
* The found offset may be less than the start
* point to search if this is the first time to
* come here.
*/
*offset = max_t(loff_t, startoff, b_offset);
unlock_page(page);
goto out;
}
/*
* We either searching data but nothing was found, or
* searching hole but found a data buffer. In either
* case, probably the next page contains the desired
* things, update the last offset to it so.
*/
lastoff = page_offset(page) + PAGE_SIZE;
unlock_page(page);
}
/*
* The number of returned pages less than our desired, search
* done. In this case, nothing was found for searching data,
* but we found a hole behind the last offset.
*/
if (nr_pages < want) {
if (type == HOLE_OFF) {
*offset = lastoff;
found = true;
}
break;
}
index = pvec.pages[i - 1]->index + 1;
pagevec_release(&pvec);
} while (index <= end);
out:
pagevec_release(&pvec);
return found;
}
STATIC loff_t
xfs_seek_hole_data(
struct file *file,
loff_t start,
int whence)
{
struct inode *inode = file->f_mapping->host;
struct xfs_inode *ip = XFS_I(inode);
struct xfs_mount *mp = ip->i_mount;
loff_t uninitialized_var(offset);
xfs_fsize_t isize;
xfs_fileoff_t fsbno;
xfs_filblks_t end;
uint lock;
int error;
if (XFS_FORCED_SHUTDOWN(mp))
return -EIO;
lock = xfs_ilock_data_map_shared(ip);
isize = i_size_read(inode);
if (start >= isize) {
error = -ENXIO;
goto out_unlock;
}
/*
* Try to read extents from the first block indicated
* by fsbno to the end block of the file.
*/
fsbno = XFS_B_TO_FSBT(mp, start);
end = XFS_B_TO_FSB(mp, isize);
for (;;) {
struct xfs_bmbt_irec map[2];
int nmap = 2;
unsigned int i;
error = xfs_bmapi_read(ip, fsbno, end - fsbno, map, &nmap,
XFS_BMAPI_ENTIRE);
if (error)
goto out_unlock;
/* No extents at given offset, must be beyond EOF */
if (nmap == 0) {
error = -ENXIO;
goto out_unlock;
}
for (i = 0; i < nmap; i++) {
offset = max_t(loff_t, start,
XFS_FSB_TO_B(mp, map[i].br_startoff));
/* Landed in the hole we wanted? */
if (whence == SEEK_HOLE &&
map[i].br_startblock == HOLESTARTBLOCK)
goto out;
/* Landed in the data extent we wanted? */
if (whence == SEEK_DATA &&
(map[i].br_startblock == DELAYSTARTBLOCK ||
(map[i].br_state == XFS_EXT_NORM &&
!isnullstartblock(map[i].br_startblock))))
goto out;
/*
* Landed in an unwritten extent, try to search
* for hole or data from page cache.
*/
if (map[i].br_state == XFS_EXT_UNWRITTEN) {
if (xfs_find_get_desired_pgoff(inode, &map[i],
whence == SEEK_HOLE ? HOLE_OFF : DATA_OFF,
&offset))
goto out;
}
}
/*
* We only received one extent out of the two requested. This
* means we've hit EOF and didn't find what we are looking for.
*/
if (nmap == 1) {
/*
* If we were looking for a hole, set offset to
* the end of the file (i.e., there is an implicit
* hole at the end of any file).
*/
if (whence == SEEK_HOLE) {
offset = isize;
break;
}
/*
* If we were looking for data, it's nowhere to be found
*/
ASSERT(whence == SEEK_DATA);
error = -ENXIO;
goto out_unlock;
}
ASSERT(i > 1);
/*
* Nothing was found, proceed to the next round of search
* if the next reading offset is not at or beyond EOF.
*/
fsbno = map[i - 1].br_startoff + map[i - 1].br_blockcount;
start = XFS_FSB_TO_B(mp, fsbno);
if (start >= isize) {
if (whence == SEEK_HOLE) {
offset = isize;
break;
}
ASSERT(whence == SEEK_DATA);
error = -ENXIO;
goto out_unlock;
}
}
out:
/*
* If at this point we have found the hole we wanted, the returned
* offset may be bigger than the file size as it may be aligned to
* page boundary for unwritten extents. We need to deal with this
* situation in particular.
*/
if (whence == SEEK_HOLE)
offset = min_t(loff_t, offset, isize);
offset = vfs_setpos(file, offset, inode->i_sb->s_maxbytes);
out_unlock:
xfs_iunlock(ip, lock);
if (error)
return error;
return offset;
}
STATIC loff_t
xfs_file_llseek(
struct file *file,
loff_t offset,
int whence)
{
switch (whence) {
case SEEK_END:
case SEEK_CUR:
case SEEK_SET:
return generic_file_llseek(file, offset, whence);
case SEEK_HOLE:
case SEEK_DATA:
return xfs_seek_hole_data(file, offset, whence);
default:
return -EINVAL;
}
}
const struct file_operations xfs_file_operations = {
.llseek = xfs_file_llseek,
.read = new_sync_read,
.write = new_sync_write,
.read_iter = xfs_file_read_iter,
.write_iter = xfs_file_write_iter,
.splice_read = xfs_file_splice_read,
.splice_write = iter_file_splice_write,
.unlocked_ioctl = xfs_file_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = xfs_file_compat_ioctl,
#endif
.mmap = xfs_file_mmap,
.open = xfs_file_open,
.release = xfs_file_release,
.fsync = xfs_file_fsync,
.fallocate = xfs_file_fallocate,
};
const struct file_operations xfs_dir_file_operations = {
.open = xfs_dir_open,
.read = generic_read_dir,
.iterate = xfs_file_readdir,
.llseek = generic_file_llseek,
.unlocked_ioctl = xfs_file_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = xfs_file_compat_ioctl,
#endif
.fsync = xfs_dir_fsync,
};
static const struct vm_operations_struct xfs_file_vm_ops = {
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 12:46:59 +04:00
.fault = filemap_fault,
.map_pages = filemap_map_pages,
.page_mkwrite = xfs_vm_page_mkwrite,
.remap_pages = generic_file_remap_pages,
};