microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/sound/soc/imx/Makefile

23 строки
869 B
Makefile
Исходник Обычный вид История

ASoC: add DMA platform driver for MX1x and MX2x This adds support for DMA platform valid for i.MX1 and i.MX2 platforms. This is not valid for i.MX3 since it doesn't share the same DMA interface than i.MX1 and i.MX2. It has been tested on i.MX27 board. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-04 19:17:52 +04:00
# i.MX Platform Support
ASoC: imx: add an explicit Kconfig option for imx-ssi driver Currently ASoC:imx uses menuconfig option SND_IMX_SOC selects imx-ssi driver, and it works because all the machine driver covered by the menuconfig need to build imx-ssi driver in. However, it will not work any more if we have a imx based machine driver going into the menuconfig while working with fsl_ssi driver (sound/soc/fsl/fsl_ssi.c) rather than imx-ssi one. The patch adds an explicit Kconfig option SND_SOC_IMX_SSI for imx-ssi driver, so that it can be selected independently from the menuconfig option SND_IMX_SOC. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-05 18:30:56 +04:00
snd-soc-imx-ssi-objs := imx-ssi.o
ASoC: imx: move audmux driver into sound/soc/imx As audmux becomes a platform driver and its callers are all ASoC machine drivers, there is no reason to keep it in arch folder, so move it to sound/soc/imx. One bonus point would be those ASoC machine drivers stop including mach/audmux.h, since it's been moved to sound/soc/imx/imx-audmux.h. This should be a move to the right direction in terms of single kernel image goal. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-05 18:30:53 +04:00
snd-soc-imx-audmux-objs := imx-audmux.o
ASoC: Add a new imx-ssi sound driver The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-25 18:41:04 +03:00
ASoC: imx: add an explicit Kconfig option for imx-ssi driver Currently ASoC:imx uses menuconfig option SND_IMX_SOC selects imx-ssi driver, and it works because all the machine driver covered by the menuconfig need to build imx-ssi driver in. However, it will not work any more if we have a imx based machine driver going into the menuconfig while working with fsl_ssi driver (sound/soc/fsl/fsl_ssi.c) rather than imx-ssi one. The patch adds an explicit Kconfig option SND_SOC_IMX_SSI for imx-ssi driver, so that it can be selected independently from the menuconfig option SND_IMX_SOC. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-05 18:30:56 +04:00
obj-$(CONFIG_SND_SOC_IMX_SSI) += snd-soc-imx-ssi.o
ASoC: imx: move audmux driver into sound/soc/imx As audmux becomes a platform driver and its callers are all ASoC machine drivers, there is no reason to keep it in arch folder, so move it to sound/soc/imx. One bonus point would be those ASoC machine drivers stop including mach/audmux.h, since it's been moved to sound/soc/imx/imx-audmux.h. This should be a move to the right direction in terms of single kernel image goal. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-05 18:30:53 +04:00
obj-$(CONFIG_SND_SOC_IMX_AUDMUX) += snd-soc-imx-audmux.o
ASoC: add machine driver for i.mx27_visstrim_m10 board This adds support for i.mx27_visstrim_sm10 board machine driver which uses an i.mx27 processor plus a wm8974 codec. It has been tested on a visstrim_sm10 board. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-04 19:18:02 +04:00
ASoC: imx: separate imx-pcm bits from imx-ssi driver Currently the imx-ssi.c[h] accommodates the imx-pcm common bits which are shared between imx-pcm-dma-mx2 and imx-pcm-fiq drivers. It assumes that imx-pcm-dma-mx2 and imx-pcm-fiq will always be used together with imx-ssi driver. However this becomes untrue when we see that driver sound/soc/fsl/fsl_ssi could possibly work with imx-pcm-dma-mx2 too. The patch moves the imx-pcm common bits from imx-ssi.c[h] into new files imx-pcm.c[h], and let imx-pcm-dma-mx2 and imx-pcm-fiq drivers build it in, so that imx-pcm-dma-mx2 can work with no dependency on imx-ssi driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-05 18:30:55 +04:00
obj-$(CONFIG_SND_SOC_IMX_PCM) += snd-soc-imx-pcm.o
snd-soc-imx-pcm-y := imx-pcm.o
snd-soc-imx-pcm-$(CONFIG_SND_MXC_SOC_FIQ) += imx-pcm-fiq.o
snd-soc-imx-pcm-$(CONFIG_SND_MXC_SOC_MX2) += imx-pcm-dma-mx2.o
ASoC: add machine driver for i.mx27_visstrim_m10 board This adds support for i.mx27_visstrim_sm10 board machine driver which uses an i.mx27 processor plus a wm8974 codec. It has been tested on a visstrim_sm10 board. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-04 19:18:02 +04:00
# i.MX Machine Support
ASoC: imx: add eukrea-tlv320 Add the necessary files to support the TLV320AIC23B wired in I2S on our i.MX platforms. Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-05-27 12:58:55 +04:00
snd-soc-eukrea-tlv320-objs := eukrea-tlv320.o
ASoC: add phycore-ac97 sound support This patch adds sound support for Phytec PhyCORE / PhyCARD modules in AC97 mode. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-02-10 13:42:33 +03:00
snd-soc-phycore-ac97-objs := phycore-ac97.o
ASoC: Add machine driver for Visstrim_M10 board. Visstrim_M10 boards have an external tlcv320aic3205 codec attached to SSI1. This driver glues together both interfaces. External amplifier is not supported in this first version. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07 10:47:09 +03:00
snd-soc-mx27vis-aic32x4-objs := mx27vis-aic32x4.o
ASoC: Wolfson Microelectronics 1133-EV1 audio support Initial support for audio using the 1133-EV1 audio and PMIC module for the i.MX31ADS. Currently only playback is supported, and the FIQ DMA driver has performance problems at higher sample rates which cause audible dropouts. This driver is based heavily on an out of tree one written by Liam Girdwood. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-02-23 14:15:34 +03:00
snd-soc-wm1133-ev1-objs := wm1133-ev1.o
ASoC: imx: add eukrea-tlv320 Add the necessary files to support the TLV320AIC23B wired in I2S on our i.MX platforms. Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-05-27 12:58:55 +04:00
obj-$(CONFIG_SND_SOC_EUKREA_TLV320) += snd-soc-eukrea-tlv320.o
ASoC: add phycore-ac97 sound support This patch adds sound support for Phytec PhyCORE / PhyCARD modules in AC97 mode. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-02-10 13:42:33 +03:00
obj-$(CONFIG_SND_SOC_PHYCORE_AC97) += snd-soc-phycore-ac97.o
ASoC: Add machine driver for Visstrim_M10 board. Visstrim_M10 boards have an external tlcv320aic3205 codec attached to SSI1. This driver glues together both interfaces. External amplifier is not supported in this first version. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07 10:47:09 +03:00
obj-$(CONFIG_SND_SOC_MX27VIS_AIC32X4) += snd-soc-mx27vis-aic32x4.o
ASoC: Wolfson Microelectronics 1133-EV1 audio support Initial support for audio using the 1133-EV1 audio and PMIC module for the i.MX31ADS. Currently only playback is supported, and the FIQ DMA driver has performance problems at higher sample rates which cause audible dropouts. This driver is based heavily on an out of tree one written by Liam Girdwood. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-02-23 14:15:34 +03:00
obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o