WSL2-Linux-Kernel/kernel/rcu/tree_plugin.h

2602 строки
81 KiB
C
Исходник Обычный вид История

/* SPDX-License-Identifier: GPL-2.0+ */
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
/*
* Read-Copy Update mechanism for mutual exclusion (tree-based version)
* Internal non-public definitions that provide either classic
* or preemptible semantics.
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
*
* Copyright Red Hat, 2009
* Copyright IBM Corporation, 2009
*
* Author: Ingo Molnar <mingo@elte.hu>
* Paul E. McKenney <paulmck@linux.ibm.com>
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
*/
#include "../locking/rtmutex_common.h"
#ifdef CONFIG_RCU_NOCB_CPU
static cpumask_var_t rcu_nocb_mask; /* CPUs to have callbacks offloaded. */
rcu: Make rcu_nocb_poll an early_param instead of module_param The as-documented rcu_nocb_poll will fail to enable this feature for two reasons. (1) there is an extra "s" in the documented name which is not in the code, and (2) since it uses module_param, it really is expecting a prefix, akin to "rcutree.fanout_leaf" and the prefix isn't documented. However, there are several reasons why we might not want to simply fix the typo and add the prefix: 1) we'd end up with rcutree.rcu_nocb_poll, and rather probably make a change to rcutree.nocb_poll 2) if we did #1, then the prefix wouldn't be consistent with the rcu_nocbs=<cpumap> parameter (i.e. one with, one without prefix) 3) the use of module_param in a header file is less than desired, since it isn't immediately obvious that it will get processed via rcutree.c and get the prefix from that (although use of module_param_named() could clarify that.) 4) the implied export of /sys/module/rcutree/parameters/rcu_nocb_poll data to userspace via module_param() doesn't really buy us anything, as it is read-only and we can tell if it is enabled already without it, since there is a printk at early boot telling us so. In light of all that, just change it from a module_param() to an early_setup() call, and worry about adding it to /sys later on if we decide to allow a dynamic setting of it. Also change the variable to be tagged as read_mostly, since it will only ever be fiddled with at most, once at boot. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-12-21 01:19:22 +04:00
static bool __read_mostly rcu_nocb_poll; /* Offload kthread are to poll. */
#endif /* #ifdef CONFIG_RCU_NOCB_CPU */
/*
* Check the RCU kernel configuration parameters and print informative
* messages about anything out of the ordinary.
*/
static void __init rcu_bootup_announce_oddness(void)
{
if (IS_ENABLED(CONFIG_RCU_TRACE))
pr_info("\tRCU event tracing is enabled.\n");
if ((IS_ENABLED(CONFIG_64BIT) && RCU_FANOUT != 64) ||
(!IS_ENABLED(CONFIG_64BIT) && RCU_FANOUT != 32))
pr_info("\tCONFIG_RCU_FANOUT set to non-default value of %d.\n",
RCU_FANOUT);
if (rcu_fanout_exact)
pr_info("\tHierarchical RCU autobalancing is disabled.\n");
if (IS_ENABLED(CONFIG_RCU_FAST_NO_HZ))
pr_info("\tRCU dyntick-idle grace-period acceleration is enabled.\n");
if (IS_ENABLED(CONFIG_PROVE_RCU))
pr_info("\tRCU lockdep checking is enabled.\n");
if (IS_ENABLED(CONFIG_RCU_STRICT_GRACE_PERIOD))
pr_info("\tRCU strict (and thus non-scalable) grace periods enabled.\n");
if (RCU_NUM_LVLS >= 4)
pr_info("\tFour(or more)-level hierarchy is enabled.\n");
if (RCU_FANOUT_LEAF != 16)
pr_info("\tBuild-time adjustment of leaf fanout to %d.\n",
RCU_FANOUT_LEAF);
if (rcu_fanout_leaf != RCU_FANOUT_LEAF)
pr_info("\tBoot-time adjustment of leaf fanout to %d.\n",
rcu_fanout_leaf);
if (nr_cpu_ids != NR_CPUS)
pr_info("\tRCU restricting CPUs from NR_CPUS=%d to nr_cpu_ids=%u.\n", NR_CPUS, nr_cpu_ids);
#ifdef CONFIG_RCU_BOOST
pr_info("\tRCU priority boosting: priority %d delay %d ms.\n",
kthread_prio, CONFIG_RCU_BOOST_DELAY);
#endif
if (blimit != DEFAULT_RCU_BLIMIT)
pr_info("\tBoot-time adjustment of callback invocation limit to %ld.\n", blimit);
if (qhimark != DEFAULT_RCU_QHIMARK)
pr_info("\tBoot-time adjustment of callback high-water mark to %ld.\n", qhimark);
if (qlowmark != DEFAULT_RCU_QLOMARK)
pr_info("\tBoot-time adjustment of callback low-water mark to %ld.\n", qlowmark);
if (qovld != DEFAULT_RCU_QOVLD)
pr_info("\tBoot-time adjustment of callback overload level to %ld.\n", qovld);
if (jiffies_till_first_fqs != ULONG_MAX)
pr_info("\tBoot-time adjustment of first FQS scan delay to %ld jiffies.\n", jiffies_till_first_fqs);
if (jiffies_till_next_fqs != ULONG_MAX)
pr_info("\tBoot-time adjustment of subsequent FQS scan delay to %ld jiffies.\n", jiffies_till_next_fqs);
if (jiffies_till_sched_qs != ULONG_MAX)
pr_info("\tBoot-time adjustment of scheduler-enlistment delay to %ld jiffies.\n", jiffies_till_sched_qs);
if (rcu_kick_kthreads)
pr_info("\tKick kthreads if too-long grace period.\n");
if (IS_ENABLED(CONFIG_DEBUG_OBJECTS_RCU_HEAD))
pr_info("\tRCU callback double-/use-after-free debug enabled.\n");
if (gp_preinit_delay)
pr_info("\tRCU debug GP pre-init slowdown %d jiffies.\n", gp_preinit_delay);
if (gp_init_delay)
pr_info("\tRCU debug GP init slowdown %d jiffies.\n", gp_init_delay);
if (gp_cleanup_delay)
pr_info("\tRCU debug GP init slowdown %d jiffies.\n", gp_cleanup_delay);
if (!use_softirq)
pr_info("\tRCU_SOFTIRQ processing moved to rcuc kthreads.\n");
if (IS_ENABLED(CONFIG_RCU_EQS_DEBUG))
pr_info("\tRCU debug extended QS entry/exit.\n");
rcupdate_announce_bootup_oddness();
}
#ifdef CONFIG_PREEMPT_RCU
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
static void rcu_report_exp_rnp(struct rcu_node *rnp, bool wake);
static void rcu_read_unlock_special(struct task_struct *t);
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
/*
* Tell them what RCU they are running.
*/
static void __init rcu_bootup_announce(void)
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
{
pr_info("Preemptible hierarchical RCU implementation.\n");
rcu_bootup_announce_oddness();
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
}
/* Flags for rcu_preempt_ctxt_queue() decision table. */
#define RCU_GP_TASKS 0x8
#define RCU_EXP_TASKS 0x4
#define RCU_GP_BLKD 0x2
#define RCU_EXP_BLKD 0x1
/*
* Queues a task preempted within an RCU-preempt read-side critical
* section into the appropriate location within the ->blkd_tasks list,
* depending on the states of any ongoing normal and expedited grace
* periods. The ->gp_tasks pointer indicates which element the normal
* grace period is waiting on (NULL if none), and the ->exp_tasks pointer
* indicates which element the expedited grace period is waiting on (again,
* NULL if none). If a grace period is waiting on a given element in the
* ->blkd_tasks list, it also waits on all subsequent elements. Thus,
* adding a task to the tail of the list blocks any grace period that is
* already waiting on one of the elements. In contrast, adding a task
* to the head of the list won't block any grace period that is already
* waiting on one of the elements.
*
* This queuing is imprecise, and can sometimes make an ongoing grace
* period wait for a task that is not strictly speaking blocking it.
* Given the choice, we needlessly block a normal grace period rather than
* blocking an expedited grace period.
*
* Note that an endless sequence of expedited grace periods still cannot
* indefinitely postpone a normal grace period. Eventually, all of the
* fixed number of preempted tasks blocking the normal grace period that are
* not also blocking the expedited grace period will resume and complete
* their RCU read-side critical sections. At that point, the ->gp_tasks
* pointer will equal the ->exp_tasks pointer, at which point the end of
* the corresponding expedited grace period will also be the end of the
* normal grace period.
*/
static void rcu_preempt_ctxt_queue(struct rcu_node *rnp, struct rcu_data *rdp)
__releases(rnp->lock) /* But leaves rrupts disabled. */
{
int blkd_state = (rnp->gp_tasks ? RCU_GP_TASKS : 0) +
(rnp->exp_tasks ? RCU_EXP_TASKS : 0) +
(rnp->qsmask & rdp->grpmask ? RCU_GP_BLKD : 0) +
(rnp->expmask & rdp->grpmask ? RCU_EXP_BLKD : 0);
struct task_struct *t = current;
raw_lockdep_assert_held_rcu_node(rnp);
WARN_ON_ONCE(rdp->mynode != rnp);
WARN_ON_ONCE(!rcu_is_leaf_node(rnp));
/* RCU better not be waiting on newly onlined CPUs! */
WARN_ON_ONCE(rnp->qsmaskinitnext & ~rnp->qsmaskinit & rnp->qsmask &
rdp->grpmask);
/*
* Decide where to queue the newly blocked task. In theory,
* this could be an if-statement. In practice, when I tried
* that, it was quite messy.
*/
switch (blkd_state) {
case 0:
case RCU_EXP_TASKS:
case RCU_EXP_TASKS + RCU_GP_BLKD:
case RCU_GP_TASKS:
case RCU_GP_TASKS + RCU_EXP_TASKS:
/*
* Blocking neither GP, or first task blocking the normal
* GP but not blocking the already-waiting expedited GP.
* Queue at the head of the list to avoid unnecessarily
* blocking the already-waiting GPs.
*/
list_add(&t->rcu_node_entry, &rnp->blkd_tasks);
break;
case RCU_EXP_BLKD:
case RCU_GP_BLKD:
case RCU_GP_BLKD + RCU_EXP_BLKD:
case RCU_GP_TASKS + RCU_EXP_BLKD:
case RCU_GP_TASKS + RCU_GP_BLKD + RCU_EXP_BLKD:
case RCU_GP_TASKS + RCU_EXP_TASKS + RCU_GP_BLKD + RCU_EXP_BLKD:
/*
* First task arriving that blocks either GP, or first task
* arriving that blocks the expedited GP (with the normal
* GP already waiting), or a task arriving that blocks
* both GPs with both GPs already waiting. Queue at the
* tail of the list to avoid any GP waiting on any of the
* already queued tasks that are not blocking it.
*/
list_add_tail(&t->rcu_node_entry, &rnp->blkd_tasks);
break;
case RCU_EXP_TASKS + RCU_EXP_BLKD:
case RCU_EXP_TASKS + RCU_GP_BLKD + RCU_EXP_BLKD:
case RCU_GP_TASKS + RCU_EXP_TASKS + RCU_EXP_BLKD:
/*
* Second or subsequent task blocking the expedited GP.
* The task either does not block the normal GP, or is the
* first task blocking the normal GP. Queue just after
* the first task blocking the expedited GP.
*/
list_add(&t->rcu_node_entry, rnp->exp_tasks);
break;
case RCU_GP_TASKS + RCU_GP_BLKD:
case RCU_GP_TASKS + RCU_EXP_TASKS + RCU_GP_BLKD:
/*
* Second or subsequent task blocking the normal GP.
* The task does not block the expedited GP. Queue just
* after the first task blocking the normal GP.
*/
list_add(&t->rcu_node_entry, rnp->gp_tasks);
break;
default:
/* Yet another exercise in excessive paranoia. */
WARN_ON_ONCE(1);
break;
}
/*
* We have now queued the task. If it was the first one to
* block either grace period, update the ->gp_tasks and/or
* ->exp_tasks pointers, respectively, to reference the newly
* blocked tasks.
*/
if (!rnp->gp_tasks && (blkd_state & RCU_GP_BLKD)) {
rcu: Avoid data-race in rcu_gp_fqs_check_wake() The rcu_gp_fqs_check_wake() function uses rcu_preempt_blocked_readers_cgp() to read ->gp_tasks while other cpus might overwrite this field. We need READ_ONCE()/WRITE_ONCE() pairs to avoid compiler tricks and KCSAN splats like the following : BUG: KCSAN: data-race in rcu_gp_fqs_check_wake / rcu_preempt_deferred_qs_irqrestore write to 0xffffffff85a7f190 of 8 bytes by task 7317 on cpu 0: rcu_preempt_deferred_qs_irqrestore+0x43d/0x580 kernel/rcu/tree_plugin.h:507 rcu_read_unlock_special+0xec/0x370 kernel/rcu/tree_plugin.h:659 __rcu_read_unlock+0xcf/0xe0 kernel/rcu/tree_plugin.h:394 rcu_read_unlock include/linux/rcupdate.h:645 [inline] __ip_queue_xmit+0x3b0/0xa40 net/ipv4/ip_output.c:533 ip_queue_xmit+0x45/0x60 include/net/ip.h:236 __tcp_transmit_skb+0xdeb/0x1cd0 net/ipv4/tcp_output.c:1158 __tcp_send_ack+0x246/0x300 net/ipv4/tcp_output.c:3685 tcp_send_ack+0x34/0x40 net/ipv4/tcp_output.c:3691 tcp_cleanup_rbuf+0x130/0x360 net/ipv4/tcp.c:1575 tcp_recvmsg+0x633/0x1a30 net/ipv4/tcp.c:2179 inet_recvmsg+0xbb/0x250 net/ipv4/af_inet.c:838 sock_recvmsg_nosec net/socket.c:871 [inline] sock_recvmsg net/socket.c:889 [inline] sock_recvmsg+0x92/0xb0 net/socket.c:885 sock_read_iter+0x15f/0x1e0 net/socket.c:967 call_read_iter include/linux/fs.h:1864 [inline] new_sync_read+0x389/0x4f0 fs/read_write.c:414 read to 0xffffffff85a7f190 of 8 bytes by task 10 on cpu 1: rcu_gp_fqs_check_wake kernel/rcu/tree.c:1556 [inline] rcu_gp_fqs_check_wake+0x93/0xd0 kernel/rcu/tree.c:1546 rcu_gp_fqs_loop+0x36c/0x580 kernel/rcu/tree.c:1611 rcu_gp_kthread+0x143/0x220 kernel/rcu/tree.c:1768 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 10 Comm: rcu_preempt Not tainted 5.3.0+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> [ paulmck: Added another READ_ONCE() for RCU CPU stall warnings. ] Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2019-10-10 00:21:54 +03:00
WRITE_ONCE(rnp->gp_tasks, &t->rcu_node_entry);
WARN_ON_ONCE(rnp->completedqs == rnp->gp_seq);
}
if (!rnp->exp_tasks && (blkd_state & RCU_EXP_BLKD))
WRITE_ONCE(rnp->exp_tasks, &t->rcu_node_entry);
WARN_ON_ONCE(!(blkd_state & RCU_GP_BLKD) !=
!(rnp->qsmask & rdp->grpmask));
WARN_ON_ONCE(!(blkd_state & RCU_EXP_BLKD) !=
!(rnp->expmask & rdp->grpmask));
raw_spin_unlock_rcu_node(rnp); /* interrupts remain disabled. */
/*
* Report the quiescent state for the expedited GP. This expedited
* GP should not be able to end until we report, so there should be
* no need to check for a subsequent expedited GP. (Though we are
* still in a quiescent state in any case.)
*/
if (blkd_state & RCU_EXP_BLKD && rdp->exp_deferred_qs)
rcu_report_exp_rdp(rdp);
else
WARN_ON_ONCE(rdp->exp_deferred_qs);
}
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
/*
* Record a preemptible-RCU quiescent state for the specified CPU.
* Note that this does not necessarily mean that the task currently running
* on the CPU is in a quiescent state: Instead, it means that the current
* grace period need not wait on any RCU read-side critical section that
* starts later on this CPU. It also means that if the current task is
* in an RCU read-side critical section, it has already added itself to
* some leaf rcu_node structure's ->blkd_tasks list. In addition to the
* current task, there might be any number of other tasks blocked while
* in an RCU read-side critical section.
rcu: refactor RCU's context-switch handling The addition of preemptible RCU to treercu resulted in a bit of confusion and inefficiency surrounding the handling of context switches for RCU-sched and for RCU-preempt. For RCU-sched, a context switch is a quiescent state, pure and simple, just like it always has been. For RCU-preempt, a context switch is in no way a quiescent state, but special handling is required when a task blocks in an RCU read-side critical section. However, the callout from the scheduler and the outer loop in ksoftirqd still calls something named rcu_sched_qs(), whose name is no longer accurate. Furthermore, when rcu_check_callbacks() notes an RCU-sched quiescent state, it ends up unnecessarily (though harmlessly, aside from the performance hit) enqueuing the current task if it happens to be running in an RCU-preempt read-side critical section. This not only increases the maximum latency of scheduler_tick(), it also needlessly increases the overhead of the next outermost rcu_read_unlock() invocation. This patch addresses this situation by separating the notion of RCU's context-switch handling from that of RCU-sched's quiescent states. The context-switch handling is covered by rcu_note_context_switch() in general and by rcu_preempt_note_context_switch() for preemptible RCU. This permits rcu_sched_qs() to handle quiescent states and only quiescent states. It also reduces the maximum latency of scheduler_tick(), though probably by much less than a microsecond. Finally, it means that tasks within preemptible-RCU read-side critical sections avoid incurring the overhead of queuing unless there really is a context switch. Suggested-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org>
2010-04-02 04:37:01 +04:00
*
* Callers to this function must disable preemption.
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
*/
static void rcu_qs(void)
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
{
RCU_LOCKDEP_WARN(preemptible(), "rcu_qs() invoked with preemption enabled!!!\n");
if (__this_cpu_read(rcu_data.cpu_no_qs.s)) {
trace_rcu_grace_period(TPS("rcu_preempt"),
__this_cpu_read(rcu_data.gp_seq),
TPS("cpuqs"));
__this_cpu_write(rcu_data.cpu_no_qs.b.norm, false);
barrier(); /* Coordinate with rcu_flavor_sched_clock_irq(). */
WRITE_ONCE(current->rcu_read_unlock_special.b.need_qs, false);
}
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
}
/*
* We have entered the scheduler, and the current task might soon be
* context-switched away from. If this task is in an RCU read-side
* critical section, we will no longer be able to rely on the CPU to
* record that fact, so we enqueue the task on the blkd_tasks list.
* The task will dequeue itself when it exits the outermost enclosing
* RCU read-side critical section. Therefore, the current grace period
* cannot be permitted to complete until the blkd_tasks list entries
* predating the current grace period drain, in other words, until
* rnp->gp_tasks becomes NULL.
*
* Caller must disable interrupts.
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
*/
void rcu_note_context_switch(bool preempt)
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
{
struct task_struct *t = current;
struct rcu_data *rdp = this_cpu_ptr(&rcu_data);
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
struct rcu_node *rnp;
trace_rcu_utilization(TPS("Start context switch"));
lockdep_assert_irqs_disabled();
WARN_ON_ONCE(!preempt && rcu_preempt_depth() > 0);
if (rcu_preempt_depth() > 0 &&
!t->rcu_read_unlock_special.b.blocked) {
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
/* Possibly blocking in an RCU read-side critical section. */
rnp = rdp->mynode;
raw_spin_lock_rcu_node(rnp);
t->rcu_read_unlock_special.b.blocked = true;
t->rcu_blocked_node = rnp;
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
/*
* Verify the CPU's sanity, trace the preemption, and
* then queue the task as required based on the states
* of any ongoing and expedited grace periods.
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
*/
rcu: Process offlining and onlining only at grace-period start Races between CPU hotplug and grace periods can be difficult to resolve, so the ->onoff_mutex is used to exclude the two events. Unfortunately, this means that it is impossible for an outgoing CPU to perform the last bits of its offlining from its last pass through the idle loop, because sleeplocks cannot be acquired in that context. This commit avoids these problems by buffering online and offline events in a new ->qsmaskinitnext field in the leaf rcu_node structures. When a grace period starts, the events accumulated in this mask are applied to the ->qsmaskinit field, and, if needed, up the rcu_node tree. The special case of all CPUs corresponding to a given leaf rcu_node structure being offline while there are still elements in that structure's ->blkd_tasks list is handled using a new ->wait_blkd_tasks field. In this case, propagating the offline bits up the tree is deferred until the beginning of the grace period after all of the tasks have exited their RCU read-side critical sections and removed themselves from the list, at which point the ->wait_blkd_tasks flag is cleared. If one of that leaf rcu_node structure's CPUs comes back online before the list empties, then the ->wait_blkd_tasks flag is simply cleared. This of course means that RCU's notion of which CPUs are offline can be out of date. This is OK because RCU need only wait on CPUs that were online at the time that the grace period started. In addition, RCU's force-quiescent-state actions will handle the case where a CPU goes offline after the grace period starts. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-01-24 08:52:37 +03:00
WARN_ON_ONCE((rdp->grpmask & rcu_rnp_online_cpus(rnp)) == 0);
WARN_ON_ONCE(!list_empty(&t->rcu_node_entry));
trace_rcu_preempt_task(rcu_state.name,
t->pid,
(rnp->qsmask & rdp->grpmask)
? rnp->gp_seq
: rcu_seq_snap(&rnp->gp_seq));
rcu_preempt_ctxt_queue(rnp, rdp);
rcu: Defer reporting RCU-preempt quiescent states when disabled This commit defers reporting of RCU-preempt quiescent states at rcu_read_unlock_special() time when any of interrupts, softirq, or preemption are disabled. These deferred quiescent states are reported at a later RCU_SOFTIRQ, context switch, idle entry, or CPU-hotplug offline operation. Of course, if another RCU read-side critical section has started in the meantime, the reporting of the quiescent state will be further deferred. This also means that disabling preemption, interrupts, and/or softirqs will act as an RCU-preempt read-side critical section. This is enforced by checking preempt_count() as needed. Some special cases must be handled on an ad-hoc basis, for example, context switch is a quiescent state even though both the scheduler and do_exit() disable preemption. In these cases, additional calls to rcu_preempt_deferred_qs() override the preemption disabling. Similar logic overrides disabled interrupts in rcu_preempt_check_callbacks() because in this case the quiescent state happened just before the corresponding scheduling-clock interrupt. In theory, this change lifts a long-standing restriction that required that if interrupts were disabled across a call to rcu_read_unlock() that the matching rcu_read_lock() also be contained within that interrupts-disabled region of code. Because the reporting of the corresponding RCU-preempt quiescent state is now deferred until after interrupts have been enabled, it is no longer possible for this situation to result in deadlocks involving the scheduler's runqueue and priority-inheritance locks. This may allow some code simplification that might reduce interrupt latency a bit. Unfortunately, in practice this would also defer deboosting a low-priority task that had been subjected to RCU priority boosting, so real-time-response considerations might well force this restriction to remain in place. Because RCU-preempt grace periods are now blocked not only by RCU read-side critical sections, but also by disabling of interrupts, preemption, and softirqs, it will be possible to eliminate RCU-bh and RCU-sched in favor of RCU-preempt in CONFIG_PREEMPT=y kernels. This may require some additional plumbing to provide the network denial-of-service guarantees that have been traditionally provided by RCU-bh. Once these are in place, CONFIG_PREEMPT=n kernels will be able to fold RCU-bh into RCU-sched. This would mean that all kernels would have but one flavor of RCU, which would open the door to significant code cleanup. Moving to a single flavor of RCU would also have the beneficial effect of reducing the NOCB kthreads by at least a factor of two. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> [ paulmck: Apply rcu_read_unlock_special() preempt_count() feedback from Joel Fernandes. ] [ paulmck: Adjust rcu_eqs_enter() call to rcu_preempt_deferred_qs() in response to bug reports from kbuild test robot. ] [ paulmck: Fix bug located by kbuild test robot involving recursion via rcu_preempt_deferred_qs(). ]
2018-06-21 22:50:01 +03:00
} else {
rcu_preempt_deferred_qs(t);
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
}
/*
* Either we were not in an RCU read-side critical section to
* begin with, or we have now recorded that critical section
* globally. Either way, we can now note a quiescent state
* for this CPU. Again, if we were in an RCU read-side critical
* section, and if that critical section was blocking the current
* grace period, then the fact that the task has been enqueued
* means that we continue to block the current grace period.
*/
rcu_qs();
if (rdp->exp_deferred_qs)
rcu_report_exp_rdp(rdp);
rcu_tasks_qs(current, preempt);
trace_rcu_utilization(TPS("End context switch"));
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
}
EXPORT_SYMBOL_GPL(rcu_note_context_switch);
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
/*
* Check for preempted RCU readers blocking the current grace period
* for the specified rcu_node structure. If the caller needs a reliable
* answer, it must hold the rcu_node's ->lock.
*/
static int rcu_preempt_blocked_readers_cgp(struct rcu_node *rnp)
{
rcu: Avoid data-race in rcu_gp_fqs_check_wake() The rcu_gp_fqs_check_wake() function uses rcu_preempt_blocked_readers_cgp() to read ->gp_tasks while other cpus might overwrite this field. We need READ_ONCE()/WRITE_ONCE() pairs to avoid compiler tricks and KCSAN splats like the following : BUG: KCSAN: data-race in rcu_gp_fqs_check_wake / rcu_preempt_deferred_qs_irqrestore write to 0xffffffff85a7f190 of 8 bytes by task 7317 on cpu 0: rcu_preempt_deferred_qs_irqrestore+0x43d/0x580 kernel/rcu/tree_plugin.h:507 rcu_read_unlock_special+0xec/0x370 kernel/rcu/tree_plugin.h:659 __rcu_read_unlock+0xcf/0xe0 kernel/rcu/tree_plugin.h:394 rcu_read_unlock include/linux/rcupdate.h:645 [inline] __ip_queue_xmit+0x3b0/0xa40 net/ipv4/ip_output.c:533 ip_queue_xmit+0x45/0x60 include/net/ip.h:236 __tcp_transmit_skb+0xdeb/0x1cd0 net/ipv4/tcp_output.c:1158 __tcp_send_ack+0x246/0x300 net/ipv4/tcp_output.c:3685 tcp_send_ack+0x34/0x40 net/ipv4/tcp_output.c:3691 tcp_cleanup_rbuf+0x130/0x360 net/ipv4/tcp.c:1575 tcp_recvmsg+0x633/0x1a30 net/ipv4/tcp.c:2179 inet_recvmsg+0xbb/0x250 net/ipv4/af_inet.c:838 sock_recvmsg_nosec net/socket.c:871 [inline] sock_recvmsg net/socket.c:889 [inline] sock_recvmsg+0x92/0xb0 net/socket.c:885 sock_read_iter+0x15f/0x1e0 net/socket.c:967 call_read_iter include/linux/fs.h:1864 [inline] new_sync_read+0x389/0x4f0 fs/read_write.c:414 read to 0xffffffff85a7f190 of 8 bytes by task 10 on cpu 1: rcu_gp_fqs_check_wake kernel/rcu/tree.c:1556 [inline] rcu_gp_fqs_check_wake+0x93/0xd0 kernel/rcu/tree.c:1546 rcu_gp_fqs_loop+0x36c/0x580 kernel/rcu/tree.c:1611 rcu_gp_kthread+0x143/0x220 kernel/rcu/tree.c:1768 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 10 Comm: rcu_preempt Not tainted 5.3.0+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> [ paulmck: Added another READ_ONCE() for RCU CPU stall warnings. ] Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2019-10-10 00:21:54 +03:00
return READ_ONCE(rnp->gp_tasks) != NULL;
}
/* limit value for ->rcu_read_lock_nesting. */
#define RCU_NEST_PMAX (INT_MAX / 2)
static void rcu_preempt_read_enter(void)
{
current->rcu_read_lock_nesting++;
}
static int rcu_preempt_read_exit(void)
{
return --current->rcu_read_lock_nesting;
}
static void rcu_preempt_depth_set(int val)
{
current->rcu_read_lock_nesting = val;
}
/*
* Preemptible RCU implementation for rcu_read_lock().
* Just increment ->rcu_read_lock_nesting, shared state will be updated
* if we block.
*/
void __rcu_read_lock(void)
{
rcu_preempt_read_enter();
if (IS_ENABLED(CONFIG_PROVE_LOCKING))
WARN_ON_ONCE(rcu_preempt_depth() > RCU_NEST_PMAX);
if (IS_ENABLED(CONFIG_RCU_STRICT_GRACE_PERIOD) && rcu_state.gp_kthread)
WRITE_ONCE(current->rcu_read_unlock_special.b.need_qs, true);
barrier(); /* critical section after entry code. */
}
EXPORT_SYMBOL_GPL(__rcu_read_lock);
/*
* Preemptible RCU implementation for rcu_read_unlock().
* Decrement ->rcu_read_lock_nesting. If the result is zero (outermost
* rcu_read_unlock()) and ->rcu_read_unlock_special is non-zero, then
* invoke rcu_read_unlock_special() to clean up after a context switch
* in an RCU read-side critical section and other special cases.
*/
void __rcu_read_unlock(void)
{
struct task_struct *t = current;
if (rcu_preempt_read_exit() == 0) {
barrier(); /* critical section before exit code. */
if (unlikely(READ_ONCE(t->rcu_read_unlock_special.s)))
rcu_read_unlock_special(t);
}
if (IS_ENABLED(CONFIG_PROVE_LOCKING)) {
int rrln = rcu_preempt_depth();
WARN_ON_ONCE(rrln < 0 || rrln > RCU_NEST_PMAX);
}
}
EXPORT_SYMBOL_GPL(__rcu_read_unlock);
/*
* Advance a ->blkd_tasks-list pointer to the next entry, instead
* returning NULL if at the end of the list.
*/
static struct list_head *rcu_next_node_entry(struct task_struct *t,
struct rcu_node *rnp)
{
struct list_head *np;
np = t->rcu_node_entry.next;
if (np == &rnp->blkd_tasks)
np = NULL;
return np;
}
/*
* Return true if the specified rcu_node structure has tasks that were
* preempted within an RCU read-side critical section.
*/
static bool rcu_preempt_has_tasks(struct rcu_node *rnp)
{
return !list_empty(&rnp->blkd_tasks);
}
rcu: Fix grace-period-stall bug on large systems with CPU hotplug When the last CPU of a given leaf rcu_node structure goes offline, all of the tasks queued on that leaf rcu_node structure (due to having blocked in their current RCU read-side critical sections) are requeued onto the root rcu_node structure. This requeuing is carried out by rcu_preempt_offline_tasks(). However, it is possible that these queued tasks are the only thing preventing the leaf rcu_node structure from reporting a quiescent state up the rcu_node hierarchy. Unfortunately, the old code would fail to do this reporting, resulting in a grace-period stall given the following sequence of events: 1. Kernel built for more than 32 CPUs on 32-bit systems or for more than 64 CPUs on 64-bit systems, so that there is more than one rcu_node structure. (Or CONFIG_RCU_FANOUT is artificially set to a number smaller than CONFIG_NR_CPUS.) 2. The kernel is built with CONFIG_TREE_PREEMPT_RCU. 3. A task running on a CPU associated with a given leaf rcu_node structure blocks while in an RCU read-side critical section -and- that CPU has not yet passed through a quiescent state for the current RCU grace period. This will cause the task to be queued on the leaf rcu_node's blocked_tasks[] array, in particular, on the element of this array corresponding to the current grace period. 4. Each of the remaining CPUs corresponding to this same leaf rcu_node structure pass through a quiescent state. However, the task is still in its RCU read-side critical section, so these quiescent states cannot be reported further up the rcu_node hierarchy. Nevertheless, all bits in the leaf rcu_node structure's ->qsmask field are now zero. 5. Each of the remaining CPUs go offline. (The events in step #4 and #5 can happen in any order as long as each CPU passes through a quiescent state before going offline.) 6. When the last CPU goes offline, __rcu_offline_cpu() will invoke rcu_preempt_offline_tasks(), which will move the task to the root rcu_node structure, but without reporting a quiescent state up the rcu_node hierarchy (and this failure to report a quiescent state is the bug). But because this leaf rcu_node structure's ->qsmask field is already zero and its ->block_tasks[] entries are all empty, force_quiescent_state() will skip this rcu_node structure. Therefore, grace periods are now hung. This patch abstracts some code out of rcu_read_unlock_special(), calling the result task_quiet() by analogy with cpu_quiet(), and invokes task_quiet() from both rcu_read_lock_special() and __rcu_offline_cpu(). Invoking task_quiet() from __rcu_offline_cpu() reports the quiescent state up the rcu_node hierarchy, fixing the bug. This ends up requiring a separate lock_class_key per level of the rcu_node hierarchy, which this patch also provides. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <12589088301770-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-22 19:53:48 +03:00
/*
rcu: Defer reporting RCU-preempt quiescent states when disabled This commit defers reporting of RCU-preempt quiescent states at rcu_read_unlock_special() time when any of interrupts, softirq, or preemption are disabled. These deferred quiescent states are reported at a later RCU_SOFTIRQ, context switch, idle entry, or CPU-hotplug offline operation. Of course, if another RCU read-side critical section has started in the meantime, the reporting of the quiescent state will be further deferred. This also means that disabling preemption, interrupts, and/or softirqs will act as an RCU-preempt read-side critical section. This is enforced by checking preempt_count() as needed. Some special cases must be handled on an ad-hoc basis, for example, context switch is a quiescent state even though both the scheduler and do_exit() disable preemption. In these cases, additional calls to rcu_preempt_deferred_qs() override the preemption disabling. Similar logic overrides disabled interrupts in rcu_preempt_check_callbacks() because in this case the quiescent state happened just before the corresponding scheduling-clock interrupt. In theory, this change lifts a long-standing restriction that required that if interrupts were disabled across a call to rcu_read_unlock() that the matching rcu_read_lock() also be contained within that interrupts-disabled region of code. Because the reporting of the corresponding RCU-preempt quiescent state is now deferred until after interrupts have been enabled, it is no longer possible for this situation to result in deadlocks involving the scheduler's runqueue and priority-inheritance locks. This may allow some code simplification that might reduce interrupt latency a bit. Unfortunately, in practice this would also defer deboosting a low-priority task that had been subjected to RCU priority boosting, so real-time-response considerations might well force this restriction to remain in place. Because RCU-preempt grace periods are now blocked not only by RCU read-side critical sections, but also by disabling of interrupts, preemption, and softirqs, it will be possible to eliminate RCU-bh and RCU-sched in favor of RCU-preempt in CONFIG_PREEMPT=y kernels. This may require some additional plumbing to provide the network denial-of-service guarantees that have been traditionally provided by RCU-bh. Once these are in place, CONFIG_PREEMPT=n kernels will be able to fold RCU-bh into RCU-sched. This would mean that all kernels would have but one flavor of RCU, which would open the door to significant code cleanup. Moving to a single flavor of RCU would also have the beneficial effect of reducing the NOCB kthreads by at least a factor of two. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> [ paulmck: Apply rcu_read_unlock_special() preempt_count() feedback from Joel Fernandes. ] [ paulmck: Adjust rcu_eqs_enter() call to rcu_preempt_deferred_qs() in response to bug reports from kbuild test robot. ] [ paulmck: Fix bug located by kbuild test robot involving recursion via rcu_preempt_deferred_qs(). ]
2018-06-21 22:50:01 +03:00
* Report deferred quiescent states. The deferral time can
* be quite short, for example, in the case of the call from
* rcu_read_unlock_special().
rcu: Fix grace-period-stall bug on large systems with CPU hotplug When the last CPU of a given leaf rcu_node structure goes offline, all of the tasks queued on that leaf rcu_node structure (due to having blocked in their current RCU read-side critical sections) are requeued onto the root rcu_node structure. This requeuing is carried out by rcu_preempt_offline_tasks(). However, it is possible that these queued tasks are the only thing preventing the leaf rcu_node structure from reporting a quiescent state up the rcu_node hierarchy. Unfortunately, the old code would fail to do this reporting, resulting in a grace-period stall given the following sequence of events: 1. Kernel built for more than 32 CPUs on 32-bit systems or for more than 64 CPUs on 64-bit systems, so that there is more than one rcu_node structure. (Or CONFIG_RCU_FANOUT is artificially set to a number smaller than CONFIG_NR_CPUS.) 2. The kernel is built with CONFIG_TREE_PREEMPT_RCU. 3. A task running on a CPU associated with a given leaf rcu_node structure blocks while in an RCU read-side critical section -and- that CPU has not yet passed through a quiescent state for the current RCU grace period. This will cause the task to be queued on the leaf rcu_node's blocked_tasks[] array, in particular, on the element of this array corresponding to the current grace period. 4. Each of the remaining CPUs corresponding to this same leaf rcu_node structure pass through a quiescent state. However, the task is still in its RCU read-side critical section, so these quiescent states cannot be reported further up the rcu_node hierarchy. Nevertheless, all bits in the leaf rcu_node structure's ->qsmask field are now zero. 5. Each of the remaining CPUs go offline. (The events in step #4 and #5 can happen in any order as long as each CPU passes through a quiescent state before going offline.) 6. When the last CPU goes offline, __rcu_offline_cpu() will invoke rcu_preempt_offline_tasks(), which will move the task to the root rcu_node structure, but without reporting a quiescent state up the rcu_node hierarchy (and this failure to report a quiescent state is the bug). But because this leaf rcu_node structure's ->qsmask field is already zero and its ->block_tasks[] entries are all empty, force_quiescent_state() will skip this rcu_node structure. Therefore, grace periods are now hung. This patch abstracts some code out of rcu_read_unlock_special(), calling the result task_quiet() by analogy with cpu_quiet(), and invokes task_quiet() from both rcu_read_lock_special() and __rcu_offline_cpu(). Invoking task_quiet() from __rcu_offline_cpu() reports the quiescent state up the rcu_node hierarchy, fixing the bug. This ends up requiring a separate lock_class_key per level of the rcu_node hierarchy, which this patch also provides. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <12589088301770-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-22 19:53:48 +03:00
*/
rcu: Defer reporting RCU-preempt quiescent states when disabled This commit defers reporting of RCU-preempt quiescent states at rcu_read_unlock_special() time when any of interrupts, softirq, or preemption are disabled. These deferred quiescent states are reported at a later RCU_SOFTIRQ, context switch, idle entry, or CPU-hotplug offline operation. Of course, if another RCU read-side critical section has started in the meantime, the reporting of the quiescent state will be further deferred. This also means that disabling preemption, interrupts, and/or softirqs will act as an RCU-preempt read-side critical section. This is enforced by checking preempt_count() as needed. Some special cases must be handled on an ad-hoc basis, for example, context switch is a quiescent state even though both the scheduler and do_exit() disable preemption. In these cases, additional calls to rcu_preempt_deferred_qs() override the preemption disabling. Similar logic overrides disabled interrupts in rcu_preempt_check_callbacks() because in this case the quiescent state happened just before the corresponding scheduling-clock interrupt. In theory, this change lifts a long-standing restriction that required that if interrupts were disabled across a call to rcu_read_unlock() that the matching rcu_read_lock() also be contained within that interrupts-disabled region of code. Because the reporting of the corresponding RCU-preempt quiescent state is now deferred until after interrupts have been enabled, it is no longer possible for this situation to result in deadlocks involving the scheduler's runqueue and priority-inheritance locks. This may allow some code simplification that might reduce interrupt latency a bit. Unfortunately, in practice this would also defer deboosting a low-priority task that had been subjected to RCU priority boosting, so real-time-response considerations might well force this restriction to remain in place. Because RCU-preempt grace periods are now blocked not only by RCU read-side critical sections, but also by disabling of interrupts, preemption, and softirqs, it will be possible to eliminate RCU-bh and RCU-sched in favor of RCU-preempt in CONFIG_PREEMPT=y kernels. This may require some additional plumbing to provide the network denial-of-service guarantees that have been traditionally provided by RCU-bh. Once these are in place, CONFIG_PREEMPT=n kernels will be able to fold RCU-bh into RCU-sched. This would mean that all kernels would have but one flavor of RCU, which would open the door to significant code cleanup. Moving to a single flavor of RCU would also have the beneficial effect of reducing the NOCB kthreads by at least a factor of two. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> [ paulmck: Apply rcu_read_unlock_special() preempt_count() feedback from Joel Fernandes. ] [ paulmck: Adjust rcu_eqs_enter() call to rcu_preempt_deferred_qs() in response to bug reports from kbuild test robot. ] [ paulmck: Fix bug located by kbuild test robot involving recursion via rcu_preempt_deferred_qs(). ]
2018-06-21 22:50:01 +03:00
static void
rcu_preempt_deferred_qs_irqrestore(struct task_struct *t, unsigned long flags)
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
{
bool empty_exp;
bool empty_norm;
bool empty_exp_now;
struct list_head *np;
bool drop_boost_mutex = false;
struct rcu_data *rdp;
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
struct rcu_node *rnp;
union rcu_special special;
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
/*
* If RCU core is waiting for this CPU to exit its critical section,
* report the fact that it has exited. Because irqs are disabled,
* t->rcu_read_unlock_special cannot change.
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
*/
special = t->rcu_read_unlock_special;
rdp = this_cpu_ptr(&rcu_data);
if (!special.s && !rdp->exp_deferred_qs) {
rcu: Defer reporting RCU-preempt quiescent states when disabled This commit defers reporting of RCU-preempt quiescent states at rcu_read_unlock_special() time when any of interrupts, softirq, or preemption are disabled. These deferred quiescent states are reported at a later RCU_SOFTIRQ, context switch, idle entry, or CPU-hotplug offline operation. Of course, if another RCU read-side critical section has started in the meantime, the reporting of the quiescent state will be further deferred. This also means that disabling preemption, interrupts, and/or softirqs will act as an RCU-preempt read-side critical section. This is enforced by checking preempt_count() as needed. Some special cases must be handled on an ad-hoc basis, for example, context switch is a quiescent state even though both the scheduler and do_exit() disable preemption. In these cases, additional calls to rcu_preempt_deferred_qs() override the preemption disabling. Similar logic overrides disabled interrupts in rcu_preempt_check_callbacks() because in this case the quiescent state happened just before the corresponding scheduling-clock interrupt. In theory, this change lifts a long-standing restriction that required that if interrupts were disabled across a call to rcu_read_unlock() that the matching rcu_read_lock() also be contained within that interrupts-disabled region of code. Because the reporting of the corresponding RCU-preempt quiescent state is now deferred until after interrupts have been enabled, it is no longer possible for this situation to result in deadlocks involving the scheduler's runqueue and priority-inheritance locks. This may allow some code simplification that might reduce interrupt latency a bit. Unfortunately, in practice this would also defer deboosting a low-priority task that had been subjected to RCU priority boosting, so real-time-response considerations might well force this restriction to remain in place. Because RCU-preempt grace periods are now blocked not only by RCU read-side critical sections, but also by disabling of interrupts, preemption, and softirqs, it will be possible to eliminate RCU-bh and RCU-sched in favor of RCU-preempt in CONFIG_PREEMPT=y kernels. This may require some additional plumbing to provide the network denial-of-service guarantees that have been traditionally provided by RCU-bh. Once these are in place, CONFIG_PREEMPT=n kernels will be able to fold RCU-bh into RCU-sched. This would mean that all kernels would have but one flavor of RCU, which would open the door to significant code cleanup. Moving to a single flavor of RCU would also have the beneficial effect of reducing the NOCB kthreads by at least a factor of two. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> [ paulmck: Apply rcu_read_unlock_special() preempt_count() feedback from Joel Fernandes. ] [ paulmck: Adjust rcu_eqs_enter() call to rcu_preempt_deferred_qs() in response to bug reports from kbuild test robot. ] [ paulmck: Fix bug located by kbuild test robot involving recursion via rcu_preempt_deferred_qs(). ]
2018-06-21 22:50:01 +03:00
local_irq_restore(flags);
return;
}
t->rcu_read_unlock_special.s = 0;
if (special.b.need_qs) {
if (IS_ENABLED(CONFIG_RCU_STRICT_GRACE_PERIOD)) {
rcu_report_qs_rdp(rdp);
udelay(rcu_unlock_delay);
} else {
rcu_qs();
}
}
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
/*
rcu: Defer reporting RCU-preempt quiescent states when disabled This commit defers reporting of RCU-preempt quiescent states at rcu_read_unlock_special() time when any of interrupts, softirq, or preemption are disabled. These deferred quiescent states are reported at a later RCU_SOFTIRQ, context switch, idle entry, or CPU-hotplug offline operation. Of course, if another RCU read-side critical section has started in the meantime, the reporting of the quiescent state will be further deferred. This also means that disabling preemption, interrupts, and/or softirqs will act as an RCU-preempt read-side critical section. This is enforced by checking preempt_count() as needed. Some special cases must be handled on an ad-hoc basis, for example, context switch is a quiescent state even though both the scheduler and do_exit() disable preemption. In these cases, additional calls to rcu_preempt_deferred_qs() override the preemption disabling. Similar logic overrides disabled interrupts in rcu_preempt_check_callbacks() because in this case the quiescent state happened just before the corresponding scheduling-clock interrupt. In theory, this change lifts a long-standing restriction that required that if interrupts were disabled across a call to rcu_read_unlock() that the matching rcu_read_lock() also be contained within that interrupts-disabled region of code. Because the reporting of the corresponding RCU-preempt quiescent state is now deferred until after interrupts have been enabled, it is no longer possible for this situation to result in deadlocks involving the scheduler's runqueue and priority-inheritance locks. This may allow some code simplification that might reduce interrupt latency a bit. Unfortunately, in practice this would also defer deboosting a low-priority task that had been subjected to RCU priority boosting, so real-time-response considerations might well force this restriction to remain in place. Because RCU-preempt grace periods are now blocked not only by RCU read-side critical sections, but also by disabling of interrupts, preemption, and softirqs, it will be possible to eliminate RCU-bh and RCU-sched in favor of RCU-preempt in CONFIG_PREEMPT=y kernels. This may require some additional plumbing to provide the network denial-of-service guarantees that have been traditionally provided by RCU-bh. Once these are in place, CONFIG_PREEMPT=n kernels will be able to fold RCU-bh into RCU-sched. This would mean that all kernels would have but one flavor of RCU, which would open the door to significant code cleanup. Moving to a single flavor of RCU would also have the beneficial effect of reducing the NOCB kthreads by at least a factor of two. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> [ paulmck: Apply rcu_read_unlock_special() preempt_count() feedback from Joel Fernandes. ] [ paulmck: Adjust rcu_eqs_enter() call to rcu_preempt_deferred_qs() in response to bug reports from kbuild test robot. ] [ paulmck: Fix bug located by kbuild test robot involving recursion via rcu_preempt_deferred_qs(). ]
2018-06-21 22:50:01 +03:00
* Respond to a request by an expedited grace period for a
* quiescent state from this CPU. Note that requests from
* tasks are handled when removing the task from the
* blocked-tasks list below.
*/
if (rdp->exp_deferred_qs)
rcu_report_exp_rdp(rdp);
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
/* Clean up if blocked during RCU read-side critical section. */
if (special.b.blocked) {
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
/*
* Remove this task from the list it blocked on. The task
* now remains queued on the rcu_node corresponding to the
* CPU it first blocked on, so there is no longer any need
* to loop. Retain a WARN_ON_ONCE() out of sheer paranoia.
*/
rnp = t->rcu_blocked_node;
raw_spin_lock_rcu_node(rnp); /* irqs already disabled. */
WARN_ON_ONCE(rnp != t->rcu_blocked_node);
WARN_ON_ONCE(!rcu_is_leaf_node(rnp));
empty_norm = !rcu_preempt_blocked_readers_cgp(rnp);
WARN_ON_ONCE(rnp->completedqs == rnp->gp_seq &&
(!empty_norm || rnp->qsmask));
empty_exp = sync_rcu_exp_done(rnp);
smp_mb(); /* ensure expedited fastpath sees end of RCU c-s. */
np = rcu_next_node_entry(t, rnp);
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
list_del_init(&t->rcu_node_entry);
t->rcu_blocked_node = NULL;
rcu: Have the RCU tracepoints use the tracepoint_string infrastructure Currently, RCU tracepoints save only a pointer to strings in the ring buffer. When displayed via the /sys/kernel/debug/tracing/trace file they are referenced like the printf "%s" that looks at the address in the ring buffer and prints out the string it points too. This requires that the strings are constant and persistent in the kernel. The problem with this is for tools like trace-cmd and perf that read the binary data from the buffers but have no access to the kernel memory to find out what string is represented by the address in the buffer. By using the tracepoint_string infrastructure, the RCU tracepoint strings can be exported such that userspace tools can map the addresses to the strings. # cat /sys/kernel/debug/tracing/printk_formats 0xffffffff81a4a0e8 : "rcu_preempt" 0xffffffff81a4a0f4 : "rcu_bh" 0xffffffff81a4a100 : "rcu_sched" 0xffffffff818437a0 : "cpuqs" 0xffffffff818437a6 : "rcu_sched" 0xffffffff818437a0 : "cpuqs" 0xffffffff818437b0 : "rcu_bh" 0xffffffff818437b7 : "Start context switch" 0xffffffff818437cc : "End context switch" 0xffffffff818437a0 : "cpuqs" [...] Now userspaces tools can display: rcu_utilization: Start context switch rcu_dyntick: Start 1 0 rcu_utilization: End context switch rcu_batch_start: rcu_preempt CBs=0/5 bl=10 rcu_dyntick: End 0 140000000000000 rcu_invoke_callback: rcu_preempt rhp=0xffff880071c0d600 func=proc_i_callback rcu_invoke_callback: rcu_preempt rhp=0xffff880077b5b230 func=__d_free rcu_dyntick: Start 140000000000000 0 rcu_invoke_callback: rcu_preempt rhp=0xffff880077563980 func=file_free_rcu rcu_batch_end: rcu_preempt CBs-invoked=3 idle=>c<>c<>c<>c< rcu_utilization: End RCU core rcu_grace_period: rcu_preempt 9741 start rcu_dyntick: Start 1 0 rcu_dyntick: End 0 140000000000000 rcu_dyntick: Start 140000000000000 0 Instead of: rcu_utilization: ffffffff81843110 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f32 rcu_batch_start: ffffffff81842f1d CBs=0/4 bl=10 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f3c rcu_grace_period: ffffffff81842f1d 9939 ffffffff81842f80 rcu_invoke_callback: ffffffff81842f1d rhp=0xffff88007888aac0 func=file_free_rcu rcu_grace_period: ffffffff81842f1d 9939 ffffffff81842f95 rcu_invoke_callback: ffffffff81842f1d rhp=0xffff88006aeb4600 func=proc_i_callback rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f32 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f3c rcu_invoke_callback: ffffffff81842f1d rhp=0xffff880071cb9fc0 func=__d_free rcu_grace_period: ffffffff81842f1d 9939 ffffffff81842f80 rcu_invoke_callback: ffffffff81842f1d rhp=0xffff88007888ae80 func=file_free_rcu rcu_batch_end: ffffffff81842f1d CBs-invoked=4 idle=>c<>c<>c<>c< rcu_utilization: ffffffff8184311f Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-13 01:18:47 +04:00
trace_rcu_unlock_preempted_task(TPS("rcu_preempt"),
rnp->gp_seq, t->pid);
if (&t->rcu_node_entry == rnp->gp_tasks)
rcu: Avoid data-race in rcu_gp_fqs_check_wake() The rcu_gp_fqs_check_wake() function uses rcu_preempt_blocked_readers_cgp() to read ->gp_tasks while other cpus might overwrite this field. We need READ_ONCE()/WRITE_ONCE() pairs to avoid compiler tricks and KCSAN splats like the following : BUG: KCSAN: data-race in rcu_gp_fqs_check_wake / rcu_preempt_deferred_qs_irqrestore write to 0xffffffff85a7f190 of 8 bytes by task 7317 on cpu 0: rcu_preempt_deferred_qs_irqrestore+0x43d/0x580 kernel/rcu/tree_plugin.h:507 rcu_read_unlock_special+0xec/0x370 kernel/rcu/tree_plugin.h:659 __rcu_read_unlock+0xcf/0xe0 kernel/rcu/tree_plugin.h:394 rcu_read_unlock include/linux/rcupdate.h:645 [inline] __ip_queue_xmit+0x3b0/0xa40 net/ipv4/ip_output.c:533 ip_queue_xmit+0x45/0x60 include/net/ip.h:236 __tcp_transmit_skb+0xdeb/0x1cd0 net/ipv4/tcp_output.c:1158 __tcp_send_ack+0x246/0x300 net/ipv4/tcp_output.c:3685 tcp_send_ack+0x34/0x40 net/ipv4/tcp_output.c:3691 tcp_cleanup_rbuf+0x130/0x360 net/ipv4/tcp.c:1575 tcp_recvmsg+0x633/0x1a30 net/ipv4/tcp.c:2179 inet_recvmsg+0xbb/0x250 net/ipv4/af_inet.c:838 sock_recvmsg_nosec net/socket.c:871 [inline] sock_recvmsg net/socket.c:889 [inline] sock_recvmsg+0x92/0xb0 net/socket.c:885 sock_read_iter+0x15f/0x1e0 net/socket.c:967 call_read_iter include/linux/fs.h:1864 [inline] new_sync_read+0x389/0x4f0 fs/read_write.c:414 read to 0xffffffff85a7f190 of 8 bytes by task 10 on cpu 1: rcu_gp_fqs_check_wake kernel/rcu/tree.c:1556 [inline] rcu_gp_fqs_check_wake+0x93/0xd0 kernel/rcu/tree.c:1546 rcu_gp_fqs_loop+0x36c/0x580 kernel/rcu/tree.c:1611 rcu_gp_kthread+0x143/0x220 kernel/rcu/tree.c:1768 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 10 Comm: rcu_preempt Not tainted 5.3.0+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> [ paulmck: Added another READ_ONCE() for RCU CPU stall warnings. ] Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2019-10-10 00:21:54 +03:00
WRITE_ONCE(rnp->gp_tasks, np);
if (&t->rcu_node_entry == rnp->exp_tasks)
WRITE_ONCE(rnp->exp_tasks, np);
if (IS_ENABLED(CONFIG_RCU_BOOST)) {
/* Snapshot ->boost_mtx ownership w/rnp->lock held. */
drop_boost_mutex = rt_mutex_owner(&rnp->boost_mtx) == t;
if (&t->rcu_node_entry == rnp->boost_tasks)
WRITE_ONCE(rnp->boost_tasks, np);
}
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
/*
* If this was the last task on the current list, and if
* we aren't waiting on any CPUs, report the quiescent state.
rcu: Avoid RCU-preempt expedited grace-period botch Because rcu_read_unlock_special() samples rcu_preempted_readers_exp(rnp) after dropping rnp->lock, the following sequence of events is possible: 1. Task A exits its RCU read-side critical section, and removes itself from the ->blkd_tasks list, releases rnp->lock, and is then preempted. Task B remains on the ->blkd_tasks list, and blocks the current expedited grace period. 2. Task B exits from its RCU read-side critical section and removes itself from the ->blkd_tasks list. Because it is the last task blocking the current expedited grace period, it ends that expedited grace period. 3. Task A resumes, and samples rcu_preempted_readers_exp(rnp) which of course indicates that nothing is blocking the nonexistent expedited grace period. Task A is again preempted. 4. Some other CPU starts an expedited grace period. There are several tasks blocking this expedited grace period queued on the same rcu_node structure that Task A was using in step 1 above. 5. Task A examines its state and incorrectly concludes that it was the last task blocking the expedited grace period on the current rcu_node structure. It therefore reports completion up the rcu_node tree. 6. The expedited grace period can then incorrectly complete before the tasks blocked on this same rcu_node structure exit their RCU read-side critical sections. Arbitrarily bad things happen. This commit therefore takes a snapshot of rcu_preempted_readers_exp(rnp) prior to dropping the lock, so that only the last task thinks that it is the last task, thus avoiding the failure scenario laid out above. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-09-22 01:41:37 +04:00
* Note that rcu_report_unblock_qs_rnp() releases rnp->lock,
* so we must take a snapshot of the expedited state.
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
*/
empty_exp_now = sync_rcu_exp_done(rnp);
if (!empty_norm && !rcu_preempt_blocked_readers_cgp(rnp)) {
rcu: Have the RCU tracepoints use the tracepoint_string infrastructure Currently, RCU tracepoints save only a pointer to strings in the ring buffer. When displayed via the /sys/kernel/debug/tracing/trace file they are referenced like the printf "%s" that looks at the address in the ring buffer and prints out the string it points too. This requires that the strings are constant and persistent in the kernel. The problem with this is for tools like trace-cmd and perf that read the binary data from the buffers but have no access to the kernel memory to find out what string is represented by the address in the buffer. By using the tracepoint_string infrastructure, the RCU tracepoint strings can be exported such that userspace tools can map the addresses to the strings. # cat /sys/kernel/debug/tracing/printk_formats 0xffffffff81a4a0e8 : "rcu_preempt" 0xffffffff81a4a0f4 : "rcu_bh" 0xffffffff81a4a100 : "rcu_sched" 0xffffffff818437a0 : "cpuqs" 0xffffffff818437a6 : "rcu_sched" 0xffffffff818437a0 : "cpuqs" 0xffffffff818437b0 : "rcu_bh" 0xffffffff818437b7 : "Start context switch" 0xffffffff818437cc : "End context switch" 0xffffffff818437a0 : "cpuqs" [...] Now userspaces tools can display: rcu_utilization: Start context switch rcu_dyntick: Start 1 0 rcu_utilization: End context switch rcu_batch_start: rcu_preempt CBs=0/5 bl=10 rcu_dyntick: End 0 140000000000000 rcu_invoke_callback: rcu_preempt rhp=0xffff880071c0d600 func=proc_i_callback rcu_invoke_callback: rcu_preempt rhp=0xffff880077b5b230 func=__d_free rcu_dyntick: Start 140000000000000 0 rcu_invoke_callback: rcu_preempt rhp=0xffff880077563980 func=file_free_rcu rcu_batch_end: rcu_preempt CBs-invoked=3 idle=>c<>c<>c<>c< rcu_utilization: End RCU core rcu_grace_period: rcu_preempt 9741 start rcu_dyntick: Start 1 0 rcu_dyntick: End 0 140000000000000 rcu_dyntick: Start 140000000000000 0 Instead of: rcu_utilization: ffffffff81843110 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f32 rcu_batch_start: ffffffff81842f1d CBs=0/4 bl=10 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f3c rcu_grace_period: ffffffff81842f1d 9939 ffffffff81842f80 rcu_invoke_callback: ffffffff81842f1d rhp=0xffff88007888aac0 func=file_free_rcu rcu_grace_period: ffffffff81842f1d 9939 ffffffff81842f95 rcu_invoke_callback: ffffffff81842f1d rhp=0xffff88006aeb4600 func=proc_i_callback rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f32 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f3c rcu_invoke_callback: ffffffff81842f1d rhp=0xffff880071cb9fc0 func=__d_free rcu_grace_period: ffffffff81842f1d 9939 ffffffff81842f80 rcu_invoke_callback: ffffffff81842f1d rhp=0xffff88007888ae80 func=file_free_rcu rcu_batch_end: ffffffff81842f1d CBs-invoked=4 idle=>c<>c<>c<>c< rcu_utilization: ffffffff8184311f Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-13 01:18:47 +04:00
trace_rcu_quiescent_state_report(TPS("preempt_rcu"),
rnp->gp_seq,
0, rnp->qsmask,
rnp->level,
rnp->grplo,
rnp->grphi,
!!rnp->gp_tasks);
rcu_report_unblock_qs_rnp(rnp, flags);
} else {
raw_spin_unlock_irqrestore_rcu_node(rnp, flags);
}
/* Unboost if we were boosted. */
if (IS_ENABLED(CONFIG_RCU_BOOST) && drop_boost_mutex)
rt_mutex_futex_unlock(&rnp->boost_mtx);
/*
* If this was the last task on the expedited lists,
* then we need to report up the rcu_node hierarchy.
*/
rcu: Avoid RCU-preempt expedited grace-period botch Because rcu_read_unlock_special() samples rcu_preempted_readers_exp(rnp) after dropping rnp->lock, the following sequence of events is possible: 1. Task A exits its RCU read-side critical section, and removes itself from the ->blkd_tasks list, releases rnp->lock, and is then preempted. Task B remains on the ->blkd_tasks list, and blocks the current expedited grace period. 2. Task B exits from its RCU read-side critical section and removes itself from the ->blkd_tasks list. Because it is the last task blocking the current expedited grace period, it ends that expedited grace period. 3. Task A resumes, and samples rcu_preempted_readers_exp(rnp) which of course indicates that nothing is blocking the nonexistent expedited grace period. Task A is again preempted. 4. Some other CPU starts an expedited grace period. There are several tasks blocking this expedited grace period queued on the same rcu_node structure that Task A was using in step 1 above. 5. Task A examines its state and incorrectly concludes that it was the last task blocking the expedited grace period on the current rcu_node structure. It therefore reports completion up the rcu_node tree. 6. The expedited grace period can then incorrectly complete before the tasks blocked on this same rcu_node structure exit their RCU read-side critical sections. Arbitrarily bad things happen. This commit therefore takes a snapshot of rcu_preempted_readers_exp(rnp) prior to dropping the lock, so that only the last task thinks that it is the last task, thus avoiding the failure scenario laid out above. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-09-22 01:41:37 +04:00
if (!empty_exp && empty_exp_now)
rcu_report_exp_rnp(rnp, true);
rcu: Fix grace-period-stall bug on large systems with CPU hotplug When the last CPU of a given leaf rcu_node structure goes offline, all of the tasks queued on that leaf rcu_node structure (due to having blocked in their current RCU read-side critical sections) are requeued onto the root rcu_node structure. This requeuing is carried out by rcu_preempt_offline_tasks(). However, it is possible that these queued tasks are the only thing preventing the leaf rcu_node structure from reporting a quiescent state up the rcu_node hierarchy. Unfortunately, the old code would fail to do this reporting, resulting in a grace-period stall given the following sequence of events: 1. Kernel built for more than 32 CPUs on 32-bit systems or for more than 64 CPUs on 64-bit systems, so that there is more than one rcu_node structure. (Or CONFIG_RCU_FANOUT is artificially set to a number smaller than CONFIG_NR_CPUS.) 2. The kernel is built with CONFIG_TREE_PREEMPT_RCU. 3. A task running on a CPU associated with a given leaf rcu_node structure blocks while in an RCU read-side critical section -and- that CPU has not yet passed through a quiescent state for the current RCU grace period. This will cause the task to be queued on the leaf rcu_node's blocked_tasks[] array, in particular, on the element of this array corresponding to the current grace period. 4. Each of the remaining CPUs corresponding to this same leaf rcu_node structure pass through a quiescent state. However, the task is still in its RCU read-side critical section, so these quiescent states cannot be reported further up the rcu_node hierarchy. Nevertheless, all bits in the leaf rcu_node structure's ->qsmask field are now zero. 5. Each of the remaining CPUs go offline. (The events in step #4 and #5 can happen in any order as long as each CPU passes through a quiescent state before going offline.) 6. When the last CPU goes offline, __rcu_offline_cpu() will invoke rcu_preempt_offline_tasks(), which will move the task to the root rcu_node structure, but without reporting a quiescent state up the rcu_node hierarchy (and this failure to report a quiescent state is the bug). But because this leaf rcu_node structure's ->qsmask field is already zero and its ->block_tasks[] entries are all empty, force_quiescent_state() will skip this rcu_node structure. Therefore, grace periods are now hung. This patch abstracts some code out of rcu_read_unlock_special(), calling the result task_quiet() by analogy with cpu_quiet(), and invokes task_quiet() from both rcu_read_lock_special() and __rcu_offline_cpu(). Invoking task_quiet() from __rcu_offline_cpu() reports the quiescent state up the rcu_node hierarchy, fixing the bug. This ends up requiring a separate lock_class_key per level of the rcu_node hierarchy, which this patch also provides. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <12589088301770-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-22 19:53:48 +03:00
} else {
local_irq_restore(flags);
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
}
}
rcu: Defer reporting RCU-preempt quiescent states when disabled This commit defers reporting of RCU-preempt quiescent states at rcu_read_unlock_special() time when any of interrupts, softirq, or preemption are disabled. These deferred quiescent states are reported at a later RCU_SOFTIRQ, context switch, idle entry, or CPU-hotplug offline operation. Of course, if another RCU read-side critical section has started in the meantime, the reporting of the quiescent state will be further deferred. This also means that disabling preemption, interrupts, and/or softirqs will act as an RCU-preempt read-side critical section. This is enforced by checking preempt_count() as needed. Some special cases must be handled on an ad-hoc basis, for example, context switch is a quiescent state even though both the scheduler and do_exit() disable preemption. In these cases, additional calls to rcu_preempt_deferred_qs() override the preemption disabling. Similar logic overrides disabled interrupts in rcu_preempt_check_callbacks() because in this case the quiescent state happened just before the corresponding scheduling-clock interrupt. In theory, this change lifts a long-standing restriction that required that if interrupts were disabled across a call to rcu_read_unlock() that the matching rcu_read_lock() also be contained within that interrupts-disabled region of code. Because the reporting of the corresponding RCU-preempt quiescent state is now deferred until after interrupts have been enabled, it is no longer possible for this situation to result in deadlocks involving the scheduler's runqueue and priority-inheritance locks. This may allow some code simplification that might reduce interrupt latency a bit. Unfortunately, in practice this would also defer deboosting a low-priority task that had been subjected to RCU priority boosting, so real-time-response considerations might well force this restriction to remain in place. Because RCU-preempt grace periods are now blocked not only by RCU read-side critical sections, but also by disabling of interrupts, preemption, and softirqs, it will be possible to eliminate RCU-bh and RCU-sched in favor of RCU-preempt in CONFIG_PREEMPT=y kernels. This may require some additional plumbing to provide the network denial-of-service guarantees that have been traditionally provided by RCU-bh. Once these are in place, CONFIG_PREEMPT=n kernels will be able to fold RCU-bh into RCU-sched. This would mean that all kernels would have but one flavor of RCU, which would open the door to significant code cleanup. Moving to a single flavor of RCU would also have the beneficial effect of reducing the NOCB kthreads by at least a factor of two. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> [ paulmck: Apply rcu_read_unlock_special() preempt_count() feedback from Joel Fernandes. ] [ paulmck: Adjust rcu_eqs_enter() call to rcu_preempt_deferred_qs() in response to bug reports from kbuild test robot. ] [ paulmck: Fix bug located by kbuild test robot involving recursion via rcu_preempt_deferred_qs(). ]
2018-06-21 22:50:01 +03:00
/*
* Is a deferred quiescent-state pending, and are we also not in
* an RCU read-side critical section? It is the caller's responsibility
* to ensure it is otherwise safe to report any deferred quiescent
* states. The reason for this is that it is safe to report a
* quiescent state during context switch even though preemption
* is disabled. This function cannot be expected to understand these
* nuances, so the caller must handle them.
*/
static bool rcu_preempt_need_deferred_qs(struct task_struct *t)
{
return (__this_cpu_read(rcu_data.exp_deferred_qs) ||
rcu: Defer reporting RCU-preempt quiescent states when disabled This commit defers reporting of RCU-preempt quiescent states at rcu_read_unlock_special() time when any of interrupts, softirq, or preemption are disabled. These deferred quiescent states are reported at a later RCU_SOFTIRQ, context switch, idle entry, or CPU-hotplug offline operation. Of course, if another RCU read-side critical section has started in the meantime, the reporting of the quiescent state will be further deferred. This also means that disabling preemption, interrupts, and/or softirqs will act as an RCU-preempt read-side critical section. This is enforced by checking preempt_count() as needed. Some special cases must be handled on an ad-hoc basis, for example, context switch is a quiescent state even though both the scheduler and do_exit() disable preemption. In these cases, additional calls to rcu_preempt_deferred_qs() override the preemption disabling. Similar logic overrides disabled interrupts in rcu_preempt_check_callbacks() because in this case the quiescent state happened just before the corresponding scheduling-clock interrupt. In theory, this change lifts a long-standing restriction that required that if interrupts were disabled across a call to rcu_read_unlock() that the matching rcu_read_lock() also be contained within that interrupts-disabled region of code. Because the reporting of the corresponding RCU-preempt quiescent state is now deferred until after interrupts have been enabled, it is no longer possible for this situation to result in deadlocks involving the scheduler's runqueue and priority-inheritance locks. This may allow some code simplification that might reduce interrupt latency a bit. Unfortunately, in practice this would also defer deboosting a low-priority task that had been subjected to RCU priority boosting, so real-time-response considerations might well force this restriction to remain in place. Because RCU-preempt grace periods are now blocked not only by RCU read-side critical sections, but also by disabling of interrupts, preemption, and softirqs, it will be possible to eliminate RCU-bh and RCU-sched in favor of RCU-preempt in CONFIG_PREEMPT=y kernels. This may require some additional plumbing to provide the network denial-of-service guarantees that have been traditionally provided by RCU-bh. Once these are in place, CONFIG_PREEMPT=n kernels will be able to fold RCU-bh into RCU-sched. This would mean that all kernels would have but one flavor of RCU, which would open the door to significant code cleanup. Moving to a single flavor of RCU would also have the beneficial effect of reducing the NOCB kthreads by at least a factor of two. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> [ paulmck: Apply rcu_read_unlock_special() preempt_count() feedback from Joel Fernandes. ] [ paulmck: Adjust rcu_eqs_enter() call to rcu_preempt_deferred_qs() in response to bug reports from kbuild test robot. ] [ paulmck: Fix bug located by kbuild test robot involving recursion via rcu_preempt_deferred_qs(). ]
2018-06-21 22:50:01 +03:00
READ_ONCE(t->rcu_read_unlock_special.s)) &&
rcu_preempt_depth() == 0;
rcu: Defer reporting RCU-preempt quiescent states when disabled This commit defers reporting of RCU-preempt quiescent states at rcu_read_unlock_special() time when any of interrupts, softirq, or preemption are disabled. These deferred quiescent states are reported at a later RCU_SOFTIRQ, context switch, idle entry, or CPU-hotplug offline operation. Of course, if another RCU read-side critical section has started in the meantime, the reporting of the quiescent state will be further deferred. This also means that disabling preemption, interrupts, and/or softirqs will act as an RCU-preempt read-side critical section. This is enforced by checking preempt_count() as needed. Some special cases must be handled on an ad-hoc basis, for example, context switch is a quiescent state even though both the scheduler and do_exit() disable preemption. In these cases, additional calls to rcu_preempt_deferred_qs() override the preemption disabling. Similar logic overrides disabled interrupts in rcu_preempt_check_callbacks() because in this case the quiescent state happened just before the corresponding scheduling-clock interrupt. In theory, this change lifts a long-standing restriction that required that if interrupts were disabled across a call to rcu_read_unlock() that the matching rcu_read_lock() also be contained within that interrupts-disabled region of code. Because the reporting of the corresponding RCU-preempt quiescent state is now deferred until after interrupts have been enabled, it is no longer possible for this situation to result in deadlocks involving the scheduler's runqueue and priority-inheritance locks. This may allow some code simplification that might reduce interrupt latency a bit. Unfortunately, in practice this would also defer deboosting a low-priority task that had been subjected to RCU priority boosting, so real-time-response considerations might well force this restriction to remain in place. Because RCU-preempt grace periods are now blocked not only by RCU read-side critical sections, but also by disabling of interrupts, preemption, and softirqs, it will be possible to eliminate RCU-bh and RCU-sched in favor of RCU-preempt in CONFIG_PREEMPT=y kernels. This may require some additional plumbing to provide the network denial-of-service guarantees that have been traditionally provided by RCU-bh. Once these are in place, CONFIG_PREEMPT=n kernels will be able to fold RCU-bh into RCU-sched. This would mean that all kernels would have but one flavor of RCU, which would open the door to significant code cleanup. Moving to a single flavor of RCU would also have the beneficial effect of reducing the NOCB kthreads by at least a factor of two. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> [ paulmck: Apply rcu_read_unlock_special() preempt_count() feedback from Joel Fernandes. ] [ paulmck: Adjust rcu_eqs_enter() call to rcu_preempt_deferred_qs() in response to bug reports from kbuild test robot. ] [ paulmck: Fix bug located by kbuild test robot involving recursion via rcu_preempt_deferred_qs(). ]
2018-06-21 22:50:01 +03:00
}
/*
* Report a deferred quiescent state if needed and safe to do so.
* As with rcu_preempt_need_deferred_qs(), "safe" involves only
* not being in an RCU read-side critical section. The caller must
* evaluate safety in terms of interrupt, softirq, and preemption
* disabling.
*/
static void rcu_preempt_deferred_qs(struct task_struct *t)
{
unsigned long flags;
if (!rcu_preempt_need_deferred_qs(t))
return;
local_irq_save(flags);
rcu_preempt_deferred_qs_irqrestore(t, flags);
}
/*
* Minimal handler to give the scheduler a chance to re-evaluate.
*/
static void rcu_preempt_deferred_qs_handler(struct irq_work *iwp)
{
struct rcu_data *rdp;
rdp = container_of(iwp, struct rcu_data, defer_qs_iw);
rdp->defer_qs_iw_pending = false;
}
rcu: Defer reporting RCU-preempt quiescent states when disabled This commit defers reporting of RCU-preempt quiescent states at rcu_read_unlock_special() time when any of interrupts, softirq, or preemption are disabled. These deferred quiescent states are reported at a later RCU_SOFTIRQ, context switch, idle entry, or CPU-hotplug offline operation. Of course, if another RCU read-side critical section has started in the meantime, the reporting of the quiescent state will be further deferred. This also means that disabling preemption, interrupts, and/or softirqs will act as an RCU-preempt read-side critical section. This is enforced by checking preempt_count() as needed. Some special cases must be handled on an ad-hoc basis, for example, context switch is a quiescent state even though both the scheduler and do_exit() disable preemption. In these cases, additional calls to rcu_preempt_deferred_qs() override the preemption disabling. Similar logic overrides disabled interrupts in rcu_preempt_check_callbacks() because in this case the quiescent state happened just before the corresponding scheduling-clock interrupt. In theory, this change lifts a long-standing restriction that required that if interrupts were disabled across a call to rcu_read_unlock() that the matching rcu_read_lock() also be contained within that interrupts-disabled region of code. Because the reporting of the corresponding RCU-preempt quiescent state is now deferred until after interrupts have been enabled, it is no longer possible for this situation to result in deadlocks involving the scheduler's runqueue and priority-inheritance locks. This may allow some code simplification that might reduce interrupt latency a bit. Unfortunately, in practice this would also defer deboosting a low-priority task that had been subjected to RCU priority boosting, so real-time-response considerations might well force this restriction to remain in place. Because RCU-preempt grace periods are now blocked not only by RCU read-side critical sections, but also by disabling of interrupts, preemption, and softirqs, it will be possible to eliminate RCU-bh and RCU-sched in favor of RCU-preempt in CONFIG_PREEMPT=y kernels. This may require some additional plumbing to provide the network denial-of-service guarantees that have been traditionally provided by RCU-bh. Once these are in place, CONFIG_PREEMPT=n kernels will be able to fold RCU-bh into RCU-sched. This would mean that all kernels would have but one flavor of RCU, which would open the door to significant code cleanup. Moving to a single flavor of RCU would also have the beneficial effect of reducing the NOCB kthreads by at least a factor of two. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> [ paulmck: Apply rcu_read_unlock_special() preempt_count() feedback from Joel Fernandes. ] [ paulmck: Adjust rcu_eqs_enter() call to rcu_preempt_deferred_qs() in response to bug reports from kbuild test robot. ] [ paulmck: Fix bug located by kbuild test robot involving recursion via rcu_preempt_deferred_qs(). ]
2018-06-21 22:50:01 +03:00
/*
* Handle special cases during rcu_read_unlock(), such as needing to
* notify RCU core processing or task having blocked during the RCU
* read-side critical section.
*/
static void rcu_read_unlock_special(struct task_struct *t)
{
unsigned long flags;
bool preempt_bh_were_disabled =
!!(preempt_count() & (PREEMPT_MASK | SOFTIRQ_MASK));
bool irqs_were_disabled;
/* NMI handlers cannot block and cannot safely manipulate state. */
if (in_nmi())
return;
local_irq_save(flags);
irqs_were_disabled = irqs_disabled_flags(flags);
rcu: Speed up expedited GPs when interrupting RCU reader In PREEMPT kernels, an expedited grace period might send an IPI to a CPU that is executing an RCU read-side critical section. In that case, it would be nice if the rcu_read_unlock() directly interacted with the RCU core code to immediately report the quiescent state. And this does happen in the case where the reader has been preempted. But it would also be a nice performance optimization if immediate reporting also happened in the preemption-free case. This commit therefore adds an ->exp_hint field to the task_struct structure's ->rcu_read_unlock_special field. The IPI handler sets this hint when it has interrupted an RCU read-side critical section, and this causes the outermost rcu_read_unlock() call to invoke rcu_read_unlock_special(), which, if preemption is enabled, reports the quiescent state immediately. If preemption is disabled, then the report is required to be deferred until preemption (or bottom halves or interrupts or whatever) is re-enabled. Because this is a hint, it does nothing for more complicated cases. For example, if the IPI interrupts an RCU reader, but interrupts are disabled across the rcu_read_unlock(), but another rcu_read_lock() is executed before interrupts are re-enabled, the hint will already have been cleared. If you do crazy things like this, reporting will be deferred until some later RCU_SOFTIRQ handler, context switch, cond_resched(), or similar. Reported-by: Joel Fernandes <joel@joelfernandes.org> Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
2018-10-16 14:12:58 +03:00
if (preempt_bh_were_disabled || irqs_were_disabled) {
bool exp;
struct rcu_data *rdp = this_cpu_ptr(&rcu_data);
struct rcu_node *rnp = rdp->mynode;
exp = (t->rcu_blocked_node &&
READ_ONCE(t->rcu_blocked_node->exp_tasks)) ||
(rdp->grpmask & READ_ONCE(rnp->expmask));
rcu: Check for wakeup-safe conditions in rcu_read_unlock_special() When RCU core processing is offloaded from RCU_SOFTIRQ to the rcuc kthreads, a full and unconditional wakeup is required to initiate RCU core processing. In contrast, when RCU core processing is carried out by RCU_SOFTIRQ, a raise_softirq() suffices. Of course, there are situations where raise_softirq() does a full wakeup, but these do not occur with normal usage of rcu_read_unlock(). The reason that full wakeups can be problematic is that the scheduler sometimes invokes rcu_read_unlock() with its pi or rq locks held, which can of course result in deadlock in CONFIG_PREEMPT=y kernels when rcu_read_unlock() invokes the scheduler. Scheduler invocations can happen in the following situations: (1) The just-ended reader has been subjected to RCU priority boosting, in which case rcu_read_unlock() must deboost, (2) Interrupts were disabled across the call to rcu_read_unlock(), so the quiescent state must be deferred, requiring a wakeup of the rcuc kthread corresponding to the current CPU. Now, the scheduler may hold one of its locks across rcu_read_unlock() only if preemption has been disabled across the entire RCU read-side critical section, which in the days prior to RCU flavor consolidation meant that rcu_read_unlock() never needed to do wakeups. However, this is no longer the case for any but the first rcu_read_unlock() following a condition (e.g., preempted RCU reader) requiring special rcu_read_unlock() attention. For example, an RCU read-side critical section might be preempted, but preemption might be disabled across the rcu_read_unlock(). The rcu_read_unlock() must defer the quiescent state, and therefore leaves the task queued on its leaf rcu_node structure. If a scheduler interrupt occurs, the scheduler might well invoke rcu_read_unlock() with one of its locks held. However, the preempted task is still queued, so rcu_read_unlock() will attempt to defer the quiescent state once more. When RCU core processing is carried out by RCU_SOFTIRQ, this works just fine: The raise_softirq() function simply sets a bit in a per-CPU mask and the RCU core processing will be undertaken upon return from interrupt. Not so when RCU core processing is carried out by the rcuc kthread: In this case, the required wakeup can result in deadlock. The initial solution to this problem was to use set_tsk_need_resched() and set_preempt_need_resched() to force a future context switch, which allows rcu_preempt_note_context_switch() to report the deferred quiescent state to RCU's core processing. Unfortunately for expedited grace periods, there can be a significant delay between the call for a context switch and the actual context switch. This commit therefore introduces a ->deferred_qs flag to the task_struct structure's rcu_special structure. This flag is initially false, and is set to true by the first call to rcu_read_unlock() requiring special attention, then finally reset back to false when the quiescent state is finally reported. Then rcu_read_unlock() attempts full wakeups only when ->deferred_qs is false, that is, on the first rcu_read_unlock() requiring special attention. Note that a chain of RCU readers linked by some other sort of reader may find that a later rcu_read_unlock() is once again able to do a full wakeup, courtesy of an intervening preemption: rcu_read_lock(); /* preempted */ local_irq_disable(); rcu_read_unlock(); /* Can do full wakeup, sets ->deferred_qs. */ rcu_read_lock(); local_irq_enable(); preempt_disable() rcu_read_unlock(); /* Cannot do full wakeup, ->deferred_qs set. */ rcu_read_lock(); preempt_enable(); /* preempted, >deferred_qs reset. */ local_irq_disable(); rcu_read_unlock(); /* Can again do full wakeup, sets ->deferred_qs. */ Such linked RCU readers do not yet seem to appear in the Linux kernel, and it is probably best if they don't. However, RCU needs to handle them, and some variations on this theme could make even raise_softirq() unsafe due to the possibility of its doing a full wakeup. This commit therefore also avoids invoking raise_softirq() when the ->deferred_qs set flag is set. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
2019-03-25 01:25:51 +03:00
// Need to defer quiescent state until everything is enabled.
if (use_softirq && (in_irq() || (exp && !irqs_were_disabled))) {
// Using softirq, safe to awaken, and either the
// wakeup is free or there is an expedited GP.
rcu: Speed up expedited GPs when interrupting RCU reader In PREEMPT kernels, an expedited grace period might send an IPI to a CPU that is executing an RCU read-side critical section. In that case, it would be nice if the rcu_read_unlock() directly interacted with the RCU core code to immediately report the quiescent state. And this does happen in the case where the reader has been preempted. But it would also be a nice performance optimization if immediate reporting also happened in the preemption-free case. This commit therefore adds an ->exp_hint field to the task_struct structure's ->rcu_read_unlock_special field. The IPI handler sets this hint when it has interrupted an RCU read-side critical section, and this causes the outermost rcu_read_unlock() call to invoke rcu_read_unlock_special(), which, if preemption is enabled, reports the quiescent state immediately. If preemption is disabled, then the report is required to be deferred until preemption (or bottom halves or interrupts or whatever) is re-enabled. Because this is a hint, it does nothing for more complicated cases. For example, if the IPI interrupts an RCU reader, but interrupts are disabled across the rcu_read_unlock(), but another rcu_read_lock() is executed before interrupts are re-enabled, the hint will already have been cleared. If you do crazy things like this, reporting will be deferred until some later RCU_SOFTIRQ handler, context switch, cond_resched(), or similar. Reported-by: Joel Fernandes <joel@joelfernandes.org> Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
2018-10-16 14:12:58 +03:00
raise_softirq_irqoff(RCU_SOFTIRQ);
} else {
rcu: Check for wakeup-safe conditions in rcu_read_unlock_special() When RCU core processing is offloaded from RCU_SOFTIRQ to the rcuc kthreads, a full and unconditional wakeup is required to initiate RCU core processing. In contrast, when RCU core processing is carried out by RCU_SOFTIRQ, a raise_softirq() suffices. Of course, there are situations where raise_softirq() does a full wakeup, but these do not occur with normal usage of rcu_read_unlock(). The reason that full wakeups can be problematic is that the scheduler sometimes invokes rcu_read_unlock() with its pi or rq locks held, which can of course result in deadlock in CONFIG_PREEMPT=y kernels when rcu_read_unlock() invokes the scheduler. Scheduler invocations can happen in the following situations: (1) The just-ended reader has been subjected to RCU priority boosting, in which case rcu_read_unlock() must deboost, (2) Interrupts were disabled across the call to rcu_read_unlock(), so the quiescent state must be deferred, requiring a wakeup of the rcuc kthread corresponding to the current CPU. Now, the scheduler may hold one of its locks across rcu_read_unlock() only if preemption has been disabled across the entire RCU read-side critical section, which in the days prior to RCU flavor consolidation meant that rcu_read_unlock() never needed to do wakeups. However, this is no longer the case for any but the first rcu_read_unlock() following a condition (e.g., preempted RCU reader) requiring special rcu_read_unlock() attention. For example, an RCU read-side critical section might be preempted, but preemption might be disabled across the rcu_read_unlock(). The rcu_read_unlock() must defer the quiescent state, and therefore leaves the task queued on its leaf rcu_node structure. If a scheduler interrupt occurs, the scheduler might well invoke rcu_read_unlock() with one of its locks held. However, the preempted task is still queued, so rcu_read_unlock() will attempt to defer the quiescent state once more. When RCU core processing is carried out by RCU_SOFTIRQ, this works just fine: The raise_softirq() function simply sets a bit in a per-CPU mask and the RCU core processing will be undertaken upon return from interrupt. Not so when RCU core processing is carried out by the rcuc kthread: In this case, the required wakeup can result in deadlock. The initial solution to this problem was to use set_tsk_need_resched() and set_preempt_need_resched() to force a future context switch, which allows rcu_preempt_note_context_switch() to report the deferred quiescent state to RCU's core processing. Unfortunately for expedited grace periods, there can be a significant delay between the call for a context switch and the actual context switch. This commit therefore introduces a ->deferred_qs flag to the task_struct structure's rcu_special structure. This flag is initially false, and is set to true by the first call to rcu_read_unlock() requiring special attention, then finally reset back to false when the quiescent state is finally reported. Then rcu_read_unlock() attempts full wakeups only when ->deferred_qs is false, that is, on the first rcu_read_unlock() requiring special attention. Note that a chain of RCU readers linked by some other sort of reader may find that a later rcu_read_unlock() is once again able to do a full wakeup, courtesy of an intervening preemption: rcu_read_lock(); /* preempted */ local_irq_disable(); rcu_read_unlock(); /* Can do full wakeup, sets ->deferred_qs. */ rcu_read_lock(); local_irq_enable(); preempt_disable() rcu_read_unlock(); /* Cannot do full wakeup, ->deferred_qs set. */ rcu_read_lock(); preempt_enable(); /* preempted, >deferred_qs reset. */ local_irq_disable(); rcu_read_unlock(); /* Can again do full wakeup, sets ->deferred_qs. */ Such linked RCU readers do not yet seem to appear in the Linux kernel, and it is probably best if they don't. However, RCU needs to handle them, and some variations on this theme could make even raise_softirq() unsafe due to the possibility of its doing a full wakeup. This commit therefore also avoids invoking raise_softirq() when the ->deferred_qs set flag is set. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
2019-03-25 01:25:51 +03:00
// Enabling BH or preempt does reschedule, so...
// Also if no expediting, slow is OK.
// Plus nohz_full CPUs eventually get tick enabled.
rcu: Speed up expedited GPs when interrupting RCU reader In PREEMPT kernels, an expedited grace period might send an IPI to a CPU that is executing an RCU read-side critical section. In that case, it would be nice if the rcu_read_unlock() directly interacted with the RCU core code to immediately report the quiescent state. And this does happen in the case where the reader has been preempted. But it would also be a nice performance optimization if immediate reporting also happened in the preemption-free case. This commit therefore adds an ->exp_hint field to the task_struct structure's ->rcu_read_unlock_special field. The IPI handler sets this hint when it has interrupted an RCU read-side critical section, and this causes the outermost rcu_read_unlock() call to invoke rcu_read_unlock_special(), which, if preemption is enabled, reports the quiescent state immediately. If preemption is disabled, then the report is required to be deferred until preemption (or bottom halves or interrupts or whatever) is re-enabled. Because this is a hint, it does nothing for more complicated cases. For example, if the IPI interrupts an RCU reader, but interrupts are disabled across the rcu_read_unlock(), but another rcu_read_lock() is executed before interrupts are re-enabled, the hint will already have been cleared. If you do crazy things like this, reporting will be deferred until some later RCU_SOFTIRQ handler, context switch, cond_resched(), or similar. Reported-by: Joel Fernandes <joel@joelfernandes.org> Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
2018-10-16 14:12:58 +03:00
set_tsk_need_resched(current);
set_preempt_need_resched();
if (IS_ENABLED(CONFIG_IRQ_WORK) && irqs_were_disabled &&
!rdp->defer_qs_iw_pending && exp) {
// Get scheduler to re-evaluate and call hooks.
// If !IRQ_WORK, FQS scan will eventually IPI.
init_irq_work(&rdp->defer_qs_iw,
rcu_preempt_deferred_qs_handler);
rdp->defer_qs_iw_pending = true;
irq_work_queue_on(&rdp->defer_qs_iw, rdp->cpu);
}
rcu: Speed up expedited GPs when interrupting RCU reader In PREEMPT kernels, an expedited grace period might send an IPI to a CPU that is executing an RCU read-side critical section. In that case, it would be nice if the rcu_read_unlock() directly interacted with the RCU core code to immediately report the quiescent state. And this does happen in the case where the reader has been preempted. But it would also be a nice performance optimization if immediate reporting also happened in the preemption-free case. This commit therefore adds an ->exp_hint field to the task_struct structure's ->rcu_read_unlock_special field. The IPI handler sets this hint when it has interrupted an RCU read-side critical section, and this causes the outermost rcu_read_unlock() call to invoke rcu_read_unlock_special(), which, if preemption is enabled, reports the quiescent state immediately. If preemption is disabled, then the report is required to be deferred until preemption (or bottom halves or interrupts or whatever) is re-enabled. Because this is a hint, it does nothing for more complicated cases. For example, if the IPI interrupts an RCU reader, but interrupts are disabled across the rcu_read_unlock(), but another rcu_read_lock() is executed before interrupts are re-enabled, the hint will already have been cleared. If you do crazy things like this, reporting will be deferred until some later RCU_SOFTIRQ handler, context switch, cond_resched(), or similar. Reported-by: Joel Fernandes <joel@joelfernandes.org> Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
2018-10-16 14:12:58 +03:00
}
rcu: Defer reporting RCU-preempt quiescent states when disabled This commit defers reporting of RCU-preempt quiescent states at rcu_read_unlock_special() time when any of interrupts, softirq, or preemption are disabled. These deferred quiescent states are reported at a later RCU_SOFTIRQ, context switch, idle entry, or CPU-hotplug offline operation. Of course, if another RCU read-side critical section has started in the meantime, the reporting of the quiescent state will be further deferred. This also means that disabling preemption, interrupts, and/or softirqs will act as an RCU-preempt read-side critical section. This is enforced by checking preempt_count() as needed. Some special cases must be handled on an ad-hoc basis, for example, context switch is a quiescent state even though both the scheduler and do_exit() disable preemption. In these cases, additional calls to rcu_preempt_deferred_qs() override the preemption disabling. Similar logic overrides disabled interrupts in rcu_preempt_check_callbacks() because in this case the quiescent state happened just before the corresponding scheduling-clock interrupt. In theory, this change lifts a long-standing restriction that required that if interrupts were disabled across a call to rcu_read_unlock() that the matching rcu_read_lock() also be contained within that interrupts-disabled region of code. Because the reporting of the corresponding RCU-preempt quiescent state is now deferred until after interrupts have been enabled, it is no longer possible for this situation to result in deadlocks involving the scheduler's runqueue and priority-inheritance locks. This may allow some code simplification that might reduce interrupt latency a bit. Unfortunately, in practice this would also defer deboosting a low-priority task that had been subjected to RCU priority boosting, so real-time-response considerations might well force this restriction to remain in place. Because RCU-preempt grace periods are now blocked not only by RCU read-side critical sections, but also by disabling of interrupts, preemption, and softirqs, it will be possible to eliminate RCU-bh and RCU-sched in favor of RCU-preempt in CONFIG_PREEMPT=y kernels. This may require some additional plumbing to provide the network denial-of-service guarantees that have been traditionally provided by RCU-bh. Once these are in place, CONFIG_PREEMPT=n kernels will be able to fold RCU-bh into RCU-sched. This would mean that all kernels would have but one flavor of RCU, which would open the door to significant code cleanup. Moving to a single flavor of RCU would also have the beneficial effect of reducing the NOCB kthreads by at least a factor of two. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> [ paulmck: Apply rcu_read_unlock_special() preempt_count() feedback from Joel Fernandes. ] [ paulmck: Adjust rcu_eqs_enter() call to rcu_preempt_deferred_qs() in response to bug reports from kbuild test robot. ] [ paulmck: Fix bug located by kbuild test robot involving recursion via rcu_preempt_deferred_qs(). ]
2018-06-21 22:50:01 +03:00
local_irq_restore(flags);
return;
}
rcu_preempt_deferred_qs_irqrestore(t, flags);
}
/*
* Check that the list of blocked tasks for the newly completed grace
* period is in fact empty. It is a serious bug to complete a grace
* period that still has RCU readers blocked! This function must be
* invoked -before- updating this rnp's ->gp_seq.
*
* Also, if there are blocked tasks on the list, they automatically
* block the newly created grace period, so set up ->gp_tasks accordingly.
*/
static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp)
{
struct task_struct *t;
RCU_LOCKDEP_WARN(preemptible(), "rcu_preempt_check_blocked_tasks() invoked with preemption enabled!!!\n");
raw_lockdep_assert_held_rcu_node(rnp);
if (WARN_ON_ONCE(rcu_preempt_blocked_readers_cgp(rnp)))
dump_blkd_tasks(rnp, 10);
rcu: Suppress false-positive splats from mid-init task resume Consider the following sequence of events in a PREEMPT=y kernel: 1. All CPUs corresponding to a given leaf rcu_node structure are offline. 2. The first phase of the rcu_gp_init() function's grace-period initialization runs, and sets that rcu_node structure's ->qsmaskinit to zero, as it should. 3. One of the CPUs corresponding to that rcu_node structure comes back online. Note that because this CPU came online after the grace period started, this grace period can safely ignore this newly onlined CPU. 4. A task running on the newly onlined CPU enters an RCU-preempt read-side critical section, and is then preempted. Because the corresponding rcu_node structure's ->qsmask is zero, rcu_preempt_ctxt_queue() leaves the rcu_node structure's ->gp_tasks field NULL, as it should. 5. The rcu_gp_init() function continues running the second phase of grace-period initialization. The ->qsmask field of the parent of the aforementioned leaf rcu_node structure is set to not expect a quiescent state from the leaf, as is only right and proper. However, when rcu_gp_init() reaches the leaf, it invokes rcu_preempt_check_blocked_tasks(), which sees that the leaf's ->blkd_tasks list is non-empty, and therefore sets the leaf's ->gp_tasks field to reference the first task on that list. 6. The grace period ends before the preempted task resumes, which is perfectly fine, given that this grace period was under no obligation to wait for that task to exit its late-starting RCU-preempt read-side critical section. Unfortunately, the leaf's ->gp_tasks field is non-NULL, so rcu_gp_cleanup() splats. After all, it appears to rcu_gp_cleanup() that the grace period failed to wait for a task that was supposed to be blocking that grace period. This commit avoids this false-positive splat by adding a check of both ->qsmaskinit and ->wait_blkd_tasks to rcu_preempt_check_blocked_tasks(). If both ->qsmaskinit and ->wait_blkd_tasks are zero, then the task must have entered its RCU-preempt read-side critical section late (after all, the CPU that it is running on was not online at that time), which means that the upper-level rcu_node structure won't be waiting for anything on the leaf anyway. If ->wait_blkd_tasks is non-zero, then there is at least one task on ths rcu_node structure's ->blkd_tasks list whose RCU read-side critical section predates the current grace period. If ->qsmaskinit is non-zero, there is at least one CPU that was online at the start of the current grace period. Thus, if both are zero, there is nothing to wait for. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2018-05-09 02:18:28 +03:00
if (rcu_preempt_has_tasks(rnp) &&
(rnp->qsmaskinit || rnp->wait_blkd_tasks)) {
rcu: Avoid data-race in rcu_gp_fqs_check_wake() The rcu_gp_fqs_check_wake() function uses rcu_preempt_blocked_readers_cgp() to read ->gp_tasks while other cpus might overwrite this field. We need READ_ONCE()/WRITE_ONCE() pairs to avoid compiler tricks and KCSAN splats like the following : BUG: KCSAN: data-race in rcu_gp_fqs_check_wake / rcu_preempt_deferred_qs_irqrestore write to 0xffffffff85a7f190 of 8 bytes by task 7317 on cpu 0: rcu_preempt_deferred_qs_irqrestore+0x43d/0x580 kernel/rcu/tree_plugin.h:507 rcu_read_unlock_special+0xec/0x370 kernel/rcu/tree_plugin.h:659 __rcu_read_unlock+0xcf/0xe0 kernel/rcu/tree_plugin.h:394 rcu_read_unlock include/linux/rcupdate.h:645 [inline] __ip_queue_xmit+0x3b0/0xa40 net/ipv4/ip_output.c:533 ip_queue_xmit+0x45/0x60 include/net/ip.h:236 __tcp_transmit_skb+0xdeb/0x1cd0 net/ipv4/tcp_output.c:1158 __tcp_send_ack+0x246/0x300 net/ipv4/tcp_output.c:3685 tcp_send_ack+0x34/0x40 net/ipv4/tcp_output.c:3691 tcp_cleanup_rbuf+0x130/0x360 net/ipv4/tcp.c:1575 tcp_recvmsg+0x633/0x1a30 net/ipv4/tcp.c:2179 inet_recvmsg+0xbb/0x250 net/ipv4/af_inet.c:838 sock_recvmsg_nosec net/socket.c:871 [inline] sock_recvmsg net/socket.c:889 [inline] sock_recvmsg+0x92/0xb0 net/socket.c:885 sock_read_iter+0x15f/0x1e0 net/socket.c:967 call_read_iter include/linux/fs.h:1864 [inline] new_sync_read+0x389/0x4f0 fs/read_write.c:414 read to 0xffffffff85a7f190 of 8 bytes by task 10 on cpu 1: rcu_gp_fqs_check_wake kernel/rcu/tree.c:1556 [inline] rcu_gp_fqs_check_wake+0x93/0xd0 kernel/rcu/tree.c:1546 rcu_gp_fqs_loop+0x36c/0x580 kernel/rcu/tree.c:1611 rcu_gp_kthread+0x143/0x220 kernel/rcu/tree.c:1768 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 10 Comm: rcu_preempt Not tainted 5.3.0+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> [ paulmck: Added another READ_ONCE() for RCU CPU stall warnings. ] Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2019-10-10 00:21:54 +03:00
WRITE_ONCE(rnp->gp_tasks, rnp->blkd_tasks.next);
t = container_of(rnp->gp_tasks, struct task_struct,
rcu_node_entry);
trace_rcu_unlock_preempted_task(TPS("rcu_preempt-GPS"),
rnp->gp_seq, t->pid);
}
WARN_ON_ONCE(rnp->qsmask);
}
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
/*
* Check for a quiescent state from the current CPU, including voluntary
* context switches for Tasks RCU. When a task blocks, the task is
* recorded in the corresponding CPU's rcu_node structure, which is checked
* elsewhere, hence this function need only check for quiescent states
* related to the current CPU, not to those related to tasks.
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
*/
static void rcu_flavor_sched_clock_irq(int user)
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
{
struct task_struct *t = current;
if (user || rcu_is_cpu_rrupt_from_idle()) {
rcu_note_voluntary_context_switch(current);
}
if (rcu_preempt_depth() > 0 ||
rcu: Defer reporting RCU-preempt quiescent states when disabled This commit defers reporting of RCU-preempt quiescent states at rcu_read_unlock_special() time when any of interrupts, softirq, or preemption are disabled. These deferred quiescent states are reported at a later RCU_SOFTIRQ, context switch, idle entry, or CPU-hotplug offline operation. Of course, if another RCU read-side critical section has started in the meantime, the reporting of the quiescent state will be further deferred. This also means that disabling preemption, interrupts, and/or softirqs will act as an RCU-preempt read-side critical section. This is enforced by checking preempt_count() as needed. Some special cases must be handled on an ad-hoc basis, for example, context switch is a quiescent state even though both the scheduler and do_exit() disable preemption. In these cases, additional calls to rcu_preempt_deferred_qs() override the preemption disabling. Similar logic overrides disabled interrupts in rcu_preempt_check_callbacks() because in this case the quiescent state happened just before the corresponding scheduling-clock interrupt. In theory, this change lifts a long-standing restriction that required that if interrupts were disabled across a call to rcu_read_unlock() that the matching rcu_read_lock() also be contained within that interrupts-disabled region of code. Because the reporting of the corresponding RCU-preempt quiescent state is now deferred until after interrupts have been enabled, it is no longer possible for this situation to result in deadlocks involving the scheduler's runqueue and priority-inheritance locks. This may allow some code simplification that might reduce interrupt latency a bit. Unfortunately, in practice this would also defer deboosting a low-priority task that had been subjected to RCU priority boosting, so real-time-response considerations might well force this restriction to remain in place. Because RCU-preempt grace periods are now blocked not only by RCU read-side critical sections, but also by disabling of interrupts, preemption, and softirqs, it will be possible to eliminate RCU-bh and RCU-sched in favor of RCU-preempt in CONFIG_PREEMPT=y kernels. This may require some additional plumbing to provide the network denial-of-service guarantees that have been traditionally provided by RCU-bh. Once these are in place, CONFIG_PREEMPT=n kernels will be able to fold RCU-bh into RCU-sched. This would mean that all kernels would have but one flavor of RCU, which would open the door to significant code cleanup. Moving to a single flavor of RCU would also have the beneficial effect of reducing the NOCB kthreads by at least a factor of two. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> [ paulmck: Apply rcu_read_unlock_special() preempt_count() feedback from Joel Fernandes. ] [ paulmck: Adjust rcu_eqs_enter() call to rcu_preempt_deferred_qs() in response to bug reports from kbuild test robot. ] [ paulmck: Fix bug located by kbuild test robot involving recursion via rcu_preempt_deferred_qs(). ]
2018-06-21 22:50:01 +03:00
(preempt_count() & (PREEMPT_MASK | SOFTIRQ_MASK))) {
/* No QS, force context switch if deferred. */
if (rcu_preempt_need_deferred_qs(t)) {
set_tsk_need_resched(t);
set_preempt_need_resched();
}
rcu: Defer reporting RCU-preempt quiescent states when disabled This commit defers reporting of RCU-preempt quiescent states at rcu_read_unlock_special() time when any of interrupts, softirq, or preemption are disabled. These deferred quiescent states are reported at a later RCU_SOFTIRQ, context switch, idle entry, or CPU-hotplug offline operation. Of course, if another RCU read-side critical section has started in the meantime, the reporting of the quiescent state will be further deferred. This also means that disabling preemption, interrupts, and/or softirqs will act as an RCU-preempt read-side critical section. This is enforced by checking preempt_count() as needed. Some special cases must be handled on an ad-hoc basis, for example, context switch is a quiescent state even though both the scheduler and do_exit() disable preemption. In these cases, additional calls to rcu_preempt_deferred_qs() override the preemption disabling. Similar logic overrides disabled interrupts in rcu_preempt_check_callbacks() because in this case the quiescent state happened just before the corresponding scheduling-clock interrupt. In theory, this change lifts a long-standing restriction that required that if interrupts were disabled across a call to rcu_read_unlock() that the matching rcu_read_lock() also be contained within that interrupts-disabled region of code. Because the reporting of the corresponding RCU-preempt quiescent state is now deferred until after interrupts have been enabled, it is no longer possible for this situation to result in deadlocks involving the scheduler's runqueue and priority-inheritance locks. This may allow some code simplification that might reduce interrupt latency a bit. Unfortunately, in practice this would also defer deboosting a low-priority task that had been subjected to RCU priority boosting, so real-time-response considerations might well force this restriction to remain in place. Because RCU-preempt grace periods are now blocked not only by RCU read-side critical sections, but also by disabling of interrupts, preemption, and softirqs, it will be possible to eliminate RCU-bh and RCU-sched in favor of RCU-preempt in CONFIG_PREEMPT=y kernels. This may require some additional plumbing to provide the network denial-of-service guarantees that have been traditionally provided by RCU-bh. Once these are in place, CONFIG_PREEMPT=n kernels will be able to fold RCU-bh into RCU-sched. This would mean that all kernels would have but one flavor of RCU, which would open the door to significant code cleanup. Moving to a single flavor of RCU would also have the beneficial effect of reducing the NOCB kthreads by at least a factor of two. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> [ paulmck: Apply rcu_read_unlock_special() preempt_count() feedback from Joel Fernandes. ] [ paulmck: Adjust rcu_eqs_enter() call to rcu_preempt_deferred_qs() in response to bug reports from kbuild test robot. ] [ paulmck: Fix bug located by kbuild test robot involving recursion via rcu_preempt_deferred_qs(). ]
2018-06-21 22:50:01 +03:00
} else if (rcu_preempt_need_deferred_qs(t)) {
rcu_preempt_deferred_qs(t); /* Report deferred QS. */
return;
} else if (!WARN_ON_ONCE(rcu_preempt_depth())) {
rcu_qs(); /* Report immediate QS. */
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
return;
}
rcu: Defer reporting RCU-preempt quiescent states when disabled This commit defers reporting of RCU-preempt quiescent states at rcu_read_unlock_special() time when any of interrupts, softirq, or preemption are disabled. These deferred quiescent states are reported at a later RCU_SOFTIRQ, context switch, idle entry, or CPU-hotplug offline operation. Of course, if another RCU read-side critical section has started in the meantime, the reporting of the quiescent state will be further deferred. This also means that disabling preemption, interrupts, and/or softirqs will act as an RCU-preempt read-side critical section. This is enforced by checking preempt_count() as needed. Some special cases must be handled on an ad-hoc basis, for example, context switch is a quiescent state even though both the scheduler and do_exit() disable preemption. In these cases, additional calls to rcu_preempt_deferred_qs() override the preemption disabling. Similar logic overrides disabled interrupts in rcu_preempt_check_callbacks() because in this case the quiescent state happened just before the corresponding scheduling-clock interrupt. In theory, this change lifts a long-standing restriction that required that if interrupts were disabled across a call to rcu_read_unlock() that the matching rcu_read_lock() also be contained within that interrupts-disabled region of code. Because the reporting of the corresponding RCU-preempt quiescent state is now deferred until after interrupts have been enabled, it is no longer possible for this situation to result in deadlocks involving the scheduler's runqueue and priority-inheritance locks. This may allow some code simplification that might reduce interrupt latency a bit. Unfortunately, in practice this would also defer deboosting a low-priority task that had been subjected to RCU priority boosting, so real-time-response considerations might well force this restriction to remain in place. Because RCU-preempt grace periods are now blocked not only by RCU read-side critical sections, but also by disabling of interrupts, preemption, and softirqs, it will be possible to eliminate RCU-bh and RCU-sched in favor of RCU-preempt in CONFIG_PREEMPT=y kernels. This may require some additional plumbing to provide the network denial-of-service guarantees that have been traditionally provided by RCU-bh. Once these are in place, CONFIG_PREEMPT=n kernels will be able to fold RCU-bh into RCU-sched. This would mean that all kernels would have but one flavor of RCU, which would open the door to significant code cleanup. Moving to a single flavor of RCU would also have the beneficial effect of reducing the NOCB kthreads by at least a factor of two. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> [ paulmck: Apply rcu_read_unlock_special() preempt_count() feedback from Joel Fernandes. ] [ paulmck: Adjust rcu_eqs_enter() call to rcu_preempt_deferred_qs() in response to bug reports from kbuild test robot. ] [ paulmck: Fix bug located by kbuild test robot involving recursion via rcu_preempt_deferred_qs(). ]
2018-06-21 22:50:01 +03:00
/* If GP is oldish, ask for help from rcu_read_unlock_special(). */
if (rcu_preempt_depth() > 0 &&
__this_cpu_read(rcu_data.core_needs_qs) &&
__this_cpu_read(rcu_data.cpu_no_qs.b.norm) &&
!t->rcu_read_unlock_special.b.need_qs &&
time_after(jiffies, rcu_state.gp_start + HZ))
t->rcu_read_unlock_special.b.need_qs = true;
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
}
/*
* Check for a task exiting while in a preemptible-RCU read-side
rcu: Make exit_rcu() handle non-preempted RCU readers The purpose of exit_rcu() is to handle cases where buggy code causes a task to exit within an RCU read-side critical section. It currently does that in the case where said RCU read-side critical section was preempted at least once, but fails to handle cases where preemption did not occur. This case needs to be handled because otherwise the final context switch away from the exiting task will incorrectly behave as if task exit were instead a preemption of an RCU read-side critical section, and will therefore queue the exiting task. The exiting task will have exited, and thus won't ever execute rcu_read_unlock(), which means that it will remain queued forever, blocking all subsequent grace periods, and eventually resulting in OOM. Although this is arguably better than letting grace periods proceed and having a later rcu_read_unlock() access the now-freed task structure that once belonged to the exiting tasks, it would obviously be better to correctly handle this case. This commit therefore sets ->rcu_read_lock_nesting to 1 in that case, so that the subsequence call to __rcu_read_unlock() causes the exiting task to exit its dangling RCU read-side critical section. Note that deferred quiescent states need not be considered. The reason is that removing the task from the ->blkd_tasks[] list in the call to rcu_preempt_deferred_qs() handles the per-task component of any deferred quiescent state, and all other components of any deferred quiescent state are associated with the CPU, which isn't going anywhere until some later CPU-hotplug operation, which will report any remaining deferred quiescent states from within the rcu_report_dead() function. Note also that negative values of ->rcu_read_lock_nesting need not be considered. First, these won't show up in exit_rcu() unless there is a serious bug in RCU, and second, setting ->rcu_read_lock_nesting sets the state so that the RCU read-side critical section will be exited normally. Again, this code has no effect unless there has been some prior bug that prevents a task from leaving an RCU read-side critical section before exiting. Furthermore, there have been no reports of the bug fixed by this commit appearing in production. This commit is therefore absolutely -not- recommended for backporting to -stable. Reported-by: ABHISHEK DUBEY <dabhishek@iisc.ac.in> Reported-by: BHARATH Y MOURYA <bharathm@iisc.ac.in> Reported-by: Aravinda Prasad <aravinda@iisc.ac.in> Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Tested-by: ABHISHEK DUBEY <dabhishek@iisc.ac.in>
2019-02-11 18:21:29 +03:00
* critical section, clean up if so. No need to issue warnings, as
* debug_check_no_locks_held() already does this if lockdep is enabled.
* Besides, if this function does anything other than just immediately
* return, there was a bug of some sort. Spewing warnings from this
* function is like as not to simply obscure important prior warnings.
*/
void exit_rcu(void)
{
struct task_struct *t = current;
rcu: Make exit_rcu() handle non-preempted RCU readers The purpose of exit_rcu() is to handle cases where buggy code causes a task to exit within an RCU read-side critical section. It currently does that in the case where said RCU read-side critical section was preempted at least once, but fails to handle cases where preemption did not occur. This case needs to be handled because otherwise the final context switch away from the exiting task will incorrectly behave as if task exit were instead a preemption of an RCU read-side critical section, and will therefore queue the exiting task. The exiting task will have exited, and thus won't ever execute rcu_read_unlock(), which means that it will remain queued forever, blocking all subsequent grace periods, and eventually resulting in OOM. Although this is arguably better than letting grace periods proceed and having a later rcu_read_unlock() access the now-freed task structure that once belonged to the exiting tasks, it would obviously be better to correctly handle this case. This commit therefore sets ->rcu_read_lock_nesting to 1 in that case, so that the subsequence call to __rcu_read_unlock() causes the exiting task to exit its dangling RCU read-side critical section. Note that deferred quiescent states need not be considered. The reason is that removing the task from the ->blkd_tasks[] list in the call to rcu_preempt_deferred_qs() handles the per-task component of any deferred quiescent state, and all other components of any deferred quiescent state are associated with the CPU, which isn't going anywhere until some later CPU-hotplug operation, which will report any remaining deferred quiescent states from within the rcu_report_dead() function. Note also that negative values of ->rcu_read_lock_nesting need not be considered. First, these won't show up in exit_rcu() unless there is a serious bug in RCU, and second, setting ->rcu_read_lock_nesting sets the state so that the RCU read-side critical section will be exited normally. Again, this code has no effect unless there has been some prior bug that prevents a task from leaving an RCU read-side critical section before exiting. Furthermore, there have been no reports of the bug fixed by this commit appearing in production. This commit is therefore absolutely -not- recommended for backporting to -stable. Reported-by: ABHISHEK DUBEY <dabhishek@iisc.ac.in> Reported-by: BHARATH Y MOURYA <bharathm@iisc.ac.in> Reported-by: Aravinda Prasad <aravinda@iisc.ac.in> Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Tested-by: ABHISHEK DUBEY <dabhishek@iisc.ac.in>
2019-02-11 18:21:29 +03:00
if (unlikely(!list_empty(&current->rcu_node_entry))) {
rcu_preempt_depth_set(1);
rcu: Make exit_rcu() handle non-preempted RCU readers The purpose of exit_rcu() is to handle cases where buggy code causes a task to exit within an RCU read-side critical section. It currently does that in the case where said RCU read-side critical section was preempted at least once, but fails to handle cases where preemption did not occur. This case needs to be handled because otherwise the final context switch away from the exiting task will incorrectly behave as if task exit were instead a preemption of an RCU read-side critical section, and will therefore queue the exiting task. The exiting task will have exited, and thus won't ever execute rcu_read_unlock(), which means that it will remain queued forever, blocking all subsequent grace periods, and eventually resulting in OOM. Although this is arguably better than letting grace periods proceed and having a later rcu_read_unlock() access the now-freed task structure that once belonged to the exiting tasks, it would obviously be better to correctly handle this case. This commit therefore sets ->rcu_read_lock_nesting to 1 in that case, so that the subsequence call to __rcu_read_unlock() causes the exiting task to exit its dangling RCU read-side critical section. Note that deferred quiescent states need not be considered. The reason is that removing the task from the ->blkd_tasks[] list in the call to rcu_preempt_deferred_qs() handles the per-task component of any deferred quiescent state, and all other components of any deferred quiescent state are associated with the CPU, which isn't going anywhere until some later CPU-hotplug operation, which will report any remaining deferred quiescent states from within the rcu_report_dead() function. Note also that negative values of ->rcu_read_lock_nesting need not be considered. First, these won't show up in exit_rcu() unless there is a serious bug in RCU, and second, setting ->rcu_read_lock_nesting sets the state so that the RCU read-side critical section will be exited normally. Again, this code has no effect unless there has been some prior bug that prevents a task from leaving an RCU read-side critical section before exiting. Furthermore, there have been no reports of the bug fixed by this commit appearing in production. This commit is therefore absolutely -not- recommended for backporting to -stable. Reported-by: ABHISHEK DUBEY <dabhishek@iisc.ac.in> Reported-by: BHARATH Y MOURYA <bharathm@iisc.ac.in> Reported-by: Aravinda Prasad <aravinda@iisc.ac.in> Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Tested-by: ABHISHEK DUBEY <dabhishek@iisc.ac.in>
2019-02-11 18:21:29 +03:00
barrier();
WRITE_ONCE(t->rcu_read_unlock_special.b.blocked, true);
} else if (unlikely(rcu_preempt_depth())) {
rcu_preempt_depth_set(1);
rcu: Make exit_rcu() handle non-preempted RCU readers The purpose of exit_rcu() is to handle cases where buggy code causes a task to exit within an RCU read-side critical section. It currently does that in the case where said RCU read-side critical section was preempted at least once, but fails to handle cases where preemption did not occur. This case needs to be handled because otherwise the final context switch away from the exiting task will incorrectly behave as if task exit were instead a preemption of an RCU read-side critical section, and will therefore queue the exiting task. The exiting task will have exited, and thus won't ever execute rcu_read_unlock(), which means that it will remain queued forever, blocking all subsequent grace periods, and eventually resulting in OOM. Although this is arguably better than letting grace periods proceed and having a later rcu_read_unlock() access the now-freed task structure that once belonged to the exiting tasks, it would obviously be better to correctly handle this case. This commit therefore sets ->rcu_read_lock_nesting to 1 in that case, so that the subsequence call to __rcu_read_unlock() causes the exiting task to exit its dangling RCU read-side critical section. Note that deferred quiescent states need not be considered. The reason is that removing the task from the ->blkd_tasks[] list in the call to rcu_preempt_deferred_qs() handles the per-task component of any deferred quiescent state, and all other components of any deferred quiescent state are associated with the CPU, which isn't going anywhere until some later CPU-hotplug operation, which will report any remaining deferred quiescent states from within the rcu_report_dead() function. Note also that negative values of ->rcu_read_lock_nesting need not be considered. First, these won't show up in exit_rcu() unless there is a serious bug in RCU, and second, setting ->rcu_read_lock_nesting sets the state so that the RCU read-side critical section will be exited normally. Again, this code has no effect unless there has been some prior bug that prevents a task from leaving an RCU read-side critical section before exiting. Furthermore, there have been no reports of the bug fixed by this commit appearing in production. This commit is therefore absolutely -not- recommended for backporting to -stable. Reported-by: ABHISHEK DUBEY <dabhishek@iisc.ac.in> Reported-by: BHARATH Y MOURYA <bharathm@iisc.ac.in> Reported-by: Aravinda Prasad <aravinda@iisc.ac.in> Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Tested-by: ABHISHEK DUBEY <dabhishek@iisc.ac.in>
2019-02-11 18:21:29 +03:00
} else {
return;
rcu: Make exit_rcu() handle non-preempted RCU readers The purpose of exit_rcu() is to handle cases where buggy code causes a task to exit within an RCU read-side critical section. It currently does that in the case where said RCU read-side critical section was preempted at least once, but fails to handle cases where preemption did not occur. This case needs to be handled because otherwise the final context switch away from the exiting task will incorrectly behave as if task exit were instead a preemption of an RCU read-side critical section, and will therefore queue the exiting task. The exiting task will have exited, and thus won't ever execute rcu_read_unlock(), which means that it will remain queued forever, blocking all subsequent grace periods, and eventually resulting in OOM. Although this is arguably better than letting grace periods proceed and having a later rcu_read_unlock() access the now-freed task structure that once belonged to the exiting tasks, it would obviously be better to correctly handle this case. This commit therefore sets ->rcu_read_lock_nesting to 1 in that case, so that the subsequence call to __rcu_read_unlock() causes the exiting task to exit its dangling RCU read-side critical section. Note that deferred quiescent states need not be considered. The reason is that removing the task from the ->blkd_tasks[] list in the call to rcu_preempt_deferred_qs() handles the per-task component of any deferred quiescent state, and all other components of any deferred quiescent state are associated with the CPU, which isn't going anywhere until some later CPU-hotplug operation, which will report any remaining deferred quiescent states from within the rcu_report_dead() function. Note also that negative values of ->rcu_read_lock_nesting need not be considered. First, these won't show up in exit_rcu() unless there is a serious bug in RCU, and second, setting ->rcu_read_lock_nesting sets the state so that the RCU read-side critical section will be exited normally. Again, this code has no effect unless there has been some prior bug that prevents a task from leaving an RCU read-side critical section before exiting. Furthermore, there have been no reports of the bug fixed by this commit appearing in production. This commit is therefore absolutely -not- recommended for backporting to -stable. Reported-by: ABHISHEK DUBEY <dabhishek@iisc.ac.in> Reported-by: BHARATH Y MOURYA <bharathm@iisc.ac.in> Reported-by: Aravinda Prasad <aravinda@iisc.ac.in> Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Tested-by: ABHISHEK DUBEY <dabhishek@iisc.ac.in>
2019-02-11 18:21:29 +03:00
}
__rcu_read_unlock();
rcu: Defer reporting RCU-preempt quiescent states when disabled This commit defers reporting of RCU-preempt quiescent states at rcu_read_unlock_special() time when any of interrupts, softirq, or preemption are disabled. These deferred quiescent states are reported at a later RCU_SOFTIRQ, context switch, idle entry, or CPU-hotplug offline operation. Of course, if another RCU read-side critical section has started in the meantime, the reporting of the quiescent state will be further deferred. This also means that disabling preemption, interrupts, and/or softirqs will act as an RCU-preempt read-side critical section. This is enforced by checking preempt_count() as needed. Some special cases must be handled on an ad-hoc basis, for example, context switch is a quiescent state even though both the scheduler and do_exit() disable preemption. In these cases, additional calls to rcu_preempt_deferred_qs() override the preemption disabling. Similar logic overrides disabled interrupts in rcu_preempt_check_callbacks() because in this case the quiescent state happened just before the corresponding scheduling-clock interrupt. In theory, this change lifts a long-standing restriction that required that if interrupts were disabled across a call to rcu_read_unlock() that the matching rcu_read_lock() also be contained within that interrupts-disabled region of code. Because the reporting of the corresponding RCU-preempt quiescent state is now deferred until after interrupts have been enabled, it is no longer possible for this situation to result in deadlocks involving the scheduler's runqueue and priority-inheritance locks. This may allow some code simplification that might reduce interrupt latency a bit. Unfortunately, in practice this would also defer deboosting a low-priority task that had been subjected to RCU priority boosting, so real-time-response considerations might well force this restriction to remain in place. Because RCU-preempt grace periods are now blocked not only by RCU read-side critical sections, but also by disabling of interrupts, preemption, and softirqs, it will be possible to eliminate RCU-bh and RCU-sched in favor of RCU-preempt in CONFIG_PREEMPT=y kernels. This may require some additional plumbing to provide the network denial-of-service guarantees that have been traditionally provided by RCU-bh. Once these are in place, CONFIG_PREEMPT=n kernels will be able to fold RCU-bh into RCU-sched. This would mean that all kernels would have but one flavor of RCU, which would open the door to significant code cleanup. Moving to a single flavor of RCU would also have the beneficial effect of reducing the NOCB kthreads by at least a factor of two. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> [ paulmck: Apply rcu_read_unlock_special() preempt_count() feedback from Joel Fernandes. ] [ paulmck: Adjust rcu_eqs_enter() call to rcu_preempt_deferred_qs() in response to bug reports from kbuild test robot. ] [ paulmck: Fix bug located by kbuild test robot involving recursion via rcu_preempt_deferred_qs(). ]
2018-06-21 22:50:01 +03:00
rcu_preempt_deferred_qs(current);
}
/*
* Dump the blocked-tasks state, but limit the list dump to the
* specified number of elements.
*/
static void
dump_blkd_tasks(struct rcu_node *rnp, int ncheck)
{
int cpu;
int i;
struct list_head *lhp;
bool onl;
struct rcu_data *rdp;
struct rcu_node *rnp1;
raw_lockdep_assert_held_rcu_node(rnp);
pr_info("%s: grp: %d-%d level: %d ->gp_seq %ld ->completedqs %ld\n",
__func__, rnp->grplo, rnp->grphi, rnp->level,
(long)READ_ONCE(rnp->gp_seq), (long)rnp->completedqs);
for (rnp1 = rnp; rnp1; rnp1 = rnp1->parent)
pr_info("%s: %d:%d ->qsmask %#lx ->qsmaskinit %#lx ->qsmaskinitnext %#lx\n",
__func__, rnp1->grplo, rnp1->grphi, rnp1->qsmask, rnp1->qsmaskinit, rnp1->qsmaskinitnext);
pr_info("%s: ->gp_tasks %p ->boost_tasks %p ->exp_tasks %p\n",
__func__, READ_ONCE(rnp->gp_tasks), data_race(rnp->boost_tasks),
READ_ONCE(rnp->exp_tasks));
pr_info("%s: ->blkd_tasks", __func__);
i = 0;
list_for_each(lhp, &rnp->blkd_tasks) {
pr_cont(" %p", lhp);
if (++i >= ncheck)
break;
}
pr_cont("\n");
for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++) {
rdp = per_cpu_ptr(&rcu_data, cpu);
onl = !!(rdp->grpmask & rcu_rnp_online_cpus(rnp));
pr_info("\t%d: %c online: %ld(%d) offline: %ld(%d)\n",
cpu, ".o"[onl],
(long)rdp->rcu_onl_gp_seq, rdp->rcu_onl_gp_flags,
(long)rdp->rcu_ofl_gp_seq, rdp->rcu_ofl_gp_flags);
}
}
#else /* #ifdef CONFIG_PREEMPT_RCU */
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
/*
* If strict grace periods are enabled, and if the calling
* __rcu_read_unlock() marks the beginning of a quiescent state, immediately
* report that quiescent state and, if requested, spin for a bit.
*/
void rcu_read_unlock_strict(void)
{
struct rcu_data *rdp;
if (!IS_ENABLED(CONFIG_RCU_STRICT_GRACE_PERIOD) ||
irqs_disabled() || preempt_count() || !rcu_state.gp_kthread)
return;
rdp = this_cpu_ptr(&rcu_data);
rcu_report_qs_rdp(rdp);
udelay(rcu_unlock_delay);
}
EXPORT_SYMBOL_GPL(rcu_read_unlock_strict);
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
/*
* Tell them what RCU they are running.
*/
static void __init rcu_bootup_announce(void)
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
{
pr_info("Hierarchical RCU implementation.\n");
rcu_bootup_announce_oddness();
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
}
/*
* Note a quiescent state for PREEMPTION=n. Because we do not need to know
* how many quiescent states passed, just if there was at least one since
* the start of the grace period, this just sets a flag. The caller must
* have disabled preemption.
*/
static void rcu_qs(void)
{
RCU_LOCKDEP_WARN(preemptible(), "rcu_qs() invoked with preemption enabled!!!");
if (!__this_cpu_read(rcu_data.cpu_no_qs.s))
return;
trace_rcu_grace_period(TPS("rcu_sched"),
__this_cpu_read(rcu_data.gp_seq), TPS("cpuqs"));
__this_cpu_write(rcu_data.cpu_no_qs.b.norm, false);
if (!__this_cpu_read(rcu_data.cpu_no_qs.b.exp))
return;
__this_cpu_write(rcu_data.cpu_no_qs.b.exp, false);
rcu_report_exp_rdp(this_cpu_ptr(&rcu_data));
}
/*
* Register an urgently needed quiescent state. If there is an
* emergency, invoke rcu_momentary_dyntick_idle() to do a heavy-weight
* dyntick-idle quiescent state visible to other CPUs, which will in
* some cases serve for expedited as well as normal grace periods.
* Either way, register a lightweight quiescent state.
*/
void rcu_all_qs(void)
{
unsigned long flags;
if (!raw_cpu_read(rcu_data.rcu_urgent_qs))
return;
preempt_disable();
/* Load rcu_urgent_qs before other flags. */
if (!smp_load_acquire(this_cpu_ptr(&rcu_data.rcu_urgent_qs))) {
preempt_enable();
return;
}
this_cpu_write(rcu_data.rcu_urgent_qs, false);
if (unlikely(raw_cpu_read(rcu_data.rcu_need_heavy_qs))) {
local_irq_save(flags);
rcu_momentary_dyntick_idle();
local_irq_restore(flags);
}
rcu_qs();
preempt_enable();
}
EXPORT_SYMBOL_GPL(rcu_all_qs);
/*
* Note a PREEMPTION=n context switch. The caller must have disabled interrupts.
*/
void rcu_note_context_switch(bool preempt)
{
trace_rcu_utilization(TPS("Start context switch"));
rcu_qs();
/* Load rcu_urgent_qs before other flags. */
if (!smp_load_acquire(this_cpu_ptr(&rcu_data.rcu_urgent_qs)))
goto out;
this_cpu_write(rcu_data.rcu_urgent_qs, false);
if (unlikely(raw_cpu_read(rcu_data.rcu_need_heavy_qs)))
rcu_momentary_dyntick_idle();
rcu_tasks_qs(current, preempt);
out:
trace_rcu_utilization(TPS("End context switch"));
}
EXPORT_SYMBOL_GPL(rcu_note_context_switch);
/*
* Because preemptible RCU does not exist, there are never any preempted
* RCU readers.
*/
static int rcu_preempt_blocked_readers_cgp(struct rcu_node *rnp)
{
return 0;
}
/*
* Because there is no preemptible RCU, there can be no readers blocked.
*/
static bool rcu_preempt_has_tasks(struct rcu_node *rnp)
rcu: Fix grace-period-stall bug on large systems with CPU hotplug When the last CPU of a given leaf rcu_node structure goes offline, all of the tasks queued on that leaf rcu_node structure (due to having blocked in their current RCU read-side critical sections) are requeued onto the root rcu_node structure. This requeuing is carried out by rcu_preempt_offline_tasks(). However, it is possible that these queued tasks are the only thing preventing the leaf rcu_node structure from reporting a quiescent state up the rcu_node hierarchy. Unfortunately, the old code would fail to do this reporting, resulting in a grace-period stall given the following sequence of events: 1. Kernel built for more than 32 CPUs on 32-bit systems or for more than 64 CPUs on 64-bit systems, so that there is more than one rcu_node structure. (Or CONFIG_RCU_FANOUT is artificially set to a number smaller than CONFIG_NR_CPUS.) 2. The kernel is built with CONFIG_TREE_PREEMPT_RCU. 3. A task running on a CPU associated with a given leaf rcu_node structure blocks while in an RCU read-side critical section -and- that CPU has not yet passed through a quiescent state for the current RCU grace period. This will cause the task to be queued on the leaf rcu_node's blocked_tasks[] array, in particular, on the element of this array corresponding to the current grace period. 4. Each of the remaining CPUs corresponding to this same leaf rcu_node structure pass through a quiescent state. However, the task is still in its RCU read-side critical section, so these quiescent states cannot be reported further up the rcu_node hierarchy. Nevertheless, all bits in the leaf rcu_node structure's ->qsmask field are now zero. 5. Each of the remaining CPUs go offline. (The events in step #4 and #5 can happen in any order as long as each CPU passes through a quiescent state before going offline.) 6. When the last CPU goes offline, __rcu_offline_cpu() will invoke rcu_preempt_offline_tasks(), which will move the task to the root rcu_node structure, but without reporting a quiescent state up the rcu_node hierarchy (and this failure to report a quiescent state is the bug). But because this leaf rcu_node structure's ->qsmask field is already zero and its ->block_tasks[] entries are all empty, force_quiescent_state() will skip this rcu_node structure. Therefore, grace periods are now hung. This patch abstracts some code out of rcu_read_unlock_special(), calling the result task_quiet() by analogy with cpu_quiet(), and invokes task_quiet() from both rcu_read_lock_special() and __rcu_offline_cpu(). Invoking task_quiet() from __rcu_offline_cpu() reports the quiescent state up the rcu_node hierarchy, fixing the bug. This ends up requiring a separate lock_class_key per level of the rcu_node hierarchy, which this patch also provides. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <12589088301770-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-22 19:53:48 +03:00
{
return false;
rcu: Fix grace-period-stall bug on large systems with CPU hotplug When the last CPU of a given leaf rcu_node structure goes offline, all of the tasks queued on that leaf rcu_node structure (due to having blocked in their current RCU read-side critical sections) are requeued onto the root rcu_node structure. This requeuing is carried out by rcu_preempt_offline_tasks(). However, it is possible that these queued tasks are the only thing preventing the leaf rcu_node structure from reporting a quiescent state up the rcu_node hierarchy. Unfortunately, the old code would fail to do this reporting, resulting in a grace-period stall given the following sequence of events: 1. Kernel built for more than 32 CPUs on 32-bit systems or for more than 64 CPUs on 64-bit systems, so that there is more than one rcu_node structure. (Or CONFIG_RCU_FANOUT is artificially set to a number smaller than CONFIG_NR_CPUS.) 2. The kernel is built with CONFIG_TREE_PREEMPT_RCU. 3. A task running on a CPU associated with a given leaf rcu_node structure blocks while in an RCU read-side critical section -and- that CPU has not yet passed through a quiescent state for the current RCU grace period. This will cause the task to be queued on the leaf rcu_node's blocked_tasks[] array, in particular, on the element of this array corresponding to the current grace period. 4. Each of the remaining CPUs corresponding to this same leaf rcu_node structure pass through a quiescent state. However, the task is still in its RCU read-side critical section, so these quiescent states cannot be reported further up the rcu_node hierarchy. Nevertheless, all bits in the leaf rcu_node structure's ->qsmask field are now zero. 5. Each of the remaining CPUs go offline. (The events in step #4 and #5 can happen in any order as long as each CPU passes through a quiescent state before going offline.) 6. When the last CPU goes offline, __rcu_offline_cpu() will invoke rcu_preempt_offline_tasks(), which will move the task to the root rcu_node structure, but without reporting a quiescent state up the rcu_node hierarchy (and this failure to report a quiescent state is the bug). But because this leaf rcu_node structure's ->qsmask field is already zero and its ->block_tasks[] entries are all empty, force_quiescent_state() will skip this rcu_node structure. Therefore, grace periods are now hung. This patch abstracts some code out of rcu_read_unlock_special(), calling the result task_quiet() by analogy with cpu_quiet(), and invokes task_quiet() from both rcu_read_lock_special() and __rcu_offline_cpu(). Invoking task_quiet() from __rcu_offline_cpu() reports the quiescent state up the rcu_node hierarchy, fixing the bug. This ends up requiring a separate lock_class_key per level of the rcu_node hierarchy, which this patch also provides. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <12589088301770-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-22 19:53:48 +03:00
}
rcu: Defer reporting RCU-preempt quiescent states when disabled This commit defers reporting of RCU-preempt quiescent states at rcu_read_unlock_special() time when any of interrupts, softirq, or preemption are disabled. These deferred quiescent states are reported at a later RCU_SOFTIRQ, context switch, idle entry, or CPU-hotplug offline operation. Of course, if another RCU read-side critical section has started in the meantime, the reporting of the quiescent state will be further deferred. This also means that disabling preemption, interrupts, and/or softirqs will act as an RCU-preempt read-side critical section. This is enforced by checking preempt_count() as needed. Some special cases must be handled on an ad-hoc basis, for example, context switch is a quiescent state even though both the scheduler and do_exit() disable preemption. In these cases, additional calls to rcu_preempt_deferred_qs() override the preemption disabling. Similar logic overrides disabled interrupts in rcu_preempt_check_callbacks() because in this case the quiescent state happened just before the corresponding scheduling-clock interrupt. In theory, this change lifts a long-standing restriction that required that if interrupts were disabled across a call to rcu_read_unlock() that the matching rcu_read_lock() also be contained within that interrupts-disabled region of code. Because the reporting of the corresponding RCU-preempt quiescent state is now deferred until after interrupts have been enabled, it is no longer possible for this situation to result in deadlocks involving the scheduler's runqueue and priority-inheritance locks. This may allow some code simplification that might reduce interrupt latency a bit. Unfortunately, in practice this would also defer deboosting a low-priority task that had been subjected to RCU priority boosting, so real-time-response considerations might well force this restriction to remain in place. Because RCU-preempt grace periods are now blocked not only by RCU read-side critical sections, but also by disabling of interrupts, preemption, and softirqs, it will be possible to eliminate RCU-bh and RCU-sched in favor of RCU-preempt in CONFIG_PREEMPT=y kernels. This may require some additional plumbing to provide the network denial-of-service guarantees that have been traditionally provided by RCU-bh. Once these are in place, CONFIG_PREEMPT=n kernels will be able to fold RCU-bh into RCU-sched. This would mean that all kernels would have but one flavor of RCU, which would open the door to significant code cleanup. Moving to a single flavor of RCU would also have the beneficial effect of reducing the NOCB kthreads by at least a factor of two. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> [ paulmck: Apply rcu_read_unlock_special() preempt_count() feedback from Joel Fernandes. ] [ paulmck: Adjust rcu_eqs_enter() call to rcu_preempt_deferred_qs() in response to bug reports from kbuild test robot. ] [ paulmck: Fix bug located by kbuild test robot involving recursion via rcu_preempt_deferred_qs(). ]
2018-06-21 22:50:01 +03:00
/*
* Because there is no preemptible RCU, there can be no deferred quiescent
* states.
*/
static bool rcu_preempt_need_deferred_qs(struct task_struct *t)
{
return false;
}
static void rcu_preempt_deferred_qs(struct task_struct *t) { }
/*
* Because there is no preemptible RCU, there can be no readers blocked,
* so there is no need to check for blocked tasks. So check only for
* bogus qsmask values.
*/
static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp)
{
WARN_ON_ONCE(rnp->qsmask);
}
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
/*
* Check to see if this CPU is in a non-context-switch quiescent state,
* namely user mode and idle loop.
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
*/
static void rcu_flavor_sched_clock_irq(int user)
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
{
if (user || rcu_is_cpu_rrupt_from_idle()) {
rcu: Merge preemptable-RCU functionality into hierarchical RCU Create a kernel/rcutree_plugin.h file that contains definitions for preemptable RCU (or, under the #else branch of the #ifdef, empty definitions for the classic non-preemptable semantics). These definitions fit into plugins defined in kernel/rcutree.c for this purpose. This variant of preemptable RCU uses a new algorithm whose read-side expense is roughly that of classic hierarchical RCU under CONFIG_PREEMPT. This new algorithm's update-side expense is similar to that of classic hierarchical RCU, and, in absence of read-side preemption or blocking, is exactly that of classic hierarchical RCU. Perhaps more important, this new algorithm has a much simpler implementation, saving well over 1,000 lines of code compared to mainline's implementation of preemptable RCU, which will hopefully be retired in favor of this new algorithm. The simplifications are obtained by maintaining per-task nesting state for running tasks, and using a simple lock-protected algorithm to handle accounting when tasks block within RCU read-side critical sections, making use of lessons learned while creating numerous user-level RCU implementations over the past 18 months. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: akpm@linux-foundation.org Cc: mathieu.desnoyers@polymtl.ca Cc: josht@linux.vnet.ibm.com Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org LKML-Reference: <12509746134003-git-send-email-> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 00:56:52 +04:00
/*
* Get here if this CPU took its interrupt from user
* mode or from the idle loop, and if this is not a
* nested interrupt. In this case, the CPU is in
* a quiescent state, so note it.
*
* No memory barrier is required here because rcu_qs()
* references only CPU-local variables that other CPUs
* neither access nor modify, at least not while the
* corresponding CPU is online.
*/
rcu_qs();
}
}
/*
* Because preemptible RCU does not exist, tasks cannot possibly exit
* while in preemptible RCU read-side critical sections.
*/
void exit_rcu(void)
{
}
/*
* Dump the guaranteed-empty blocked-tasks state. Trust but verify.
*/
static void
dump_blkd_tasks(struct rcu_node *rnp, int ncheck)
{
WARN_ON_ONCE(!list_empty(&rnp->blkd_tasks));
}
#endif /* #else #ifdef CONFIG_PREEMPT_RCU */
rcu: Accelerate grace period if last non-dynticked CPU Currently, rcu_needs_cpu() simply checks whether the current CPU has an outstanding RCU callback, which means that the last CPU to go into dyntick-idle mode might wait a few ticks for the relevant grace periods to complete. However, if all the other CPUs are in dyntick-idle mode, and if this CPU is in a quiescent state (which it is for RCU-bh and RCU-sched any time that we are considering going into dyntick-idle mode), then the grace period is instantly complete. This patch therefore repeatedly invokes the RCU grace-period machinery in order to force any needed grace periods to complete quickly. It does so a limited number of times in order to prevent starvation by an RCU callback function that might pass itself to call_rcu(). However, if any CPU other than the current one is not in dyntick-idle mode, fall back to simply checking (with fix to bug noted by Lai Jiangshan). Also, take advantage of last grace-period forcing, the opportunity to do so noted by Steve Rostedt. And apply simplified #ifdef condition suggested by Frederic Weisbecker. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1266887105-1528-15-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-23 04:04:59 +03:00
/*
* If boosting, set rcuc kthreads to realtime priority.
*/
static void rcu_cpu_kthread_setup(unsigned int cpu)
{
#ifdef CONFIG_RCU_BOOST
struct sched_param sp;
sp.sched_priority = kthread_prio;
sched_setscheduler_nocheck(current, SCHED_FIFO, &sp);
#endif /* #ifdef CONFIG_RCU_BOOST */
rcu: Yield simpler The rcu_yield() code is amazing. It's there to avoid starvation of the system when lots of (boosting) work is to be done. Now looking at the code it's functionality is: Make the thread SCHED_OTHER and very nice, i.e. get it out of the way Arm a timer with 2 ticks schedule() Now if the system goes idle the rcu task returns, regains SCHED_FIFO and plugs on. If the systems stays busy the timer fires and wakes a per node kthread which in turn makes the per cpu thread SCHED_FIFO and brings it back on the cpu. For the boosting thread the "make it FIFO" bit is missing and it just runs some magic boost checks. Now this is a lot of code with extra threads and complexity. It's way simpler to let the tasks when they detect overload schedule away for 2 ticks and defer the normal wakeup as long as they are in yielded state and the cpu is not idle. That solves the same problem and the only difference is that when the cpu goes idle it's not guaranteed that the thread returns right away, but it won't be longer out than two ticks, so no harm is done. If that's an issue than it is way simpler just to wake the task from idle as RCU has callbacks there anyway. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120716103948.131256723@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-07-16 14:42:35 +04:00
}
#ifdef CONFIG_RCU_BOOST
/*
* Carry out RCU priority boosting on the task indicated by ->exp_tasks
* or ->boost_tasks, advancing the pointer to the next task in the
* ->blkd_tasks list.
*
* Note that irqs must be enabled: boosting the task can block.
* Returns 1 if there are more tasks needing to be boosted.
*/
static int rcu_boost(struct rcu_node *rnp)
{
unsigned long flags;
struct task_struct *t;
struct list_head *tb;
if (READ_ONCE(rnp->exp_tasks) == NULL &&
READ_ONCE(rnp->boost_tasks) == NULL)
return 0; /* Nothing left to boost. */
raw_spin_lock_irqsave_rcu_node(rnp, flags);
/*
* Recheck under the lock: all tasks in need of boosting
* might exit their RCU read-side critical sections on their own.
*/
if (rnp->exp_tasks == NULL && rnp->boost_tasks == NULL) {
raw_spin_unlock_irqrestore_rcu_node(rnp, flags);
return 0;
}
/*
* Preferentially boost tasks blocking expedited grace periods.
* This cannot starve the normal grace periods because a second
* expedited grace period must boost all blocked tasks, including
* those blocking the pre-existing normal grace period.
*/
if (rnp->exp_tasks != NULL)
tb = rnp->exp_tasks;
else
tb = rnp->boost_tasks;
/*
* We boost task t by manufacturing an rt_mutex that appears to
* be held by task t. We leave a pointer to that rt_mutex where
* task t can find it, and task t will release the mutex when it
* exits its outermost RCU read-side critical section. Then
* simply acquiring this artificial rt_mutex will boost task
* t's priority. (Thanks to tglx for suggesting this approach!)
*
* Note that task t must acquire rnp->lock to remove itself from
* the ->blkd_tasks list, which it will do from exit() if from
* nowhere else. We therefore are guaranteed that task t will
* stay around at least until we drop rnp->lock. Note that
* rnp->lock also resolves races between our priority boosting
* and task t's exiting its outermost RCU read-side critical
* section.
*/
t = container_of(tb, struct task_struct, rcu_node_entry);
rt_mutex_init_proxy_locked(&rnp->boost_mtx, t);
raw_spin_unlock_irqrestore_rcu_node(rnp, flags);
/* Lock only for side effect: boosts task t's priority. */
rt_mutex_lock(&rnp->boost_mtx);
rt_mutex_unlock(&rnp->boost_mtx); /* Then keep lockdep happy. */
return READ_ONCE(rnp->exp_tasks) != NULL ||
READ_ONCE(rnp->boost_tasks) != NULL;
}
/*
* Priority-boosting kthread, one per leaf rcu_node.
*/
static int rcu_boost_kthread(void *arg)
{
struct rcu_node *rnp = (struct rcu_node *)arg;
int spincnt = 0;
int more2boost;
rcu: Have the RCU tracepoints use the tracepoint_string infrastructure Currently, RCU tracepoints save only a pointer to strings in the ring buffer. When displayed via the /sys/kernel/debug/tracing/trace file they are referenced like the printf "%s" that looks at the address in the ring buffer and prints out the string it points too. This requires that the strings are constant and persistent in the kernel. The problem with this is for tools like trace-cmd and perf that read the binary data from the buffers but have no access to the kernel memory to find out what string is represented by the address in the buffer. By using the tracepoint_string infrastructure, the RCU tracepoint strings can be exported such that userspace tools can map the addresses to the strings. # cat /sys/kernel/debug/tracing/printk_formats 0xffffffff81a4a0e8 : "rcu_preempt" 0xffffffff81a4a0f4 : "rcu_bh" 0xffffffff81a4a100 : "rcu_sched" 0xffffffff818437a0 : "cpuqs" 0xffffffff818437a6 : "rcu_sched" 0xffffffff818437a0 : "cpuqs" 0xffffffff818437b0 : "rcu_bh" 0xffffffff818437b7 : "Start context switch" 0xffffffff818437cc : "End context switch" 0xffffffff818437a0 : "cpuqs" [...] Now userspaces tools can display: rcu_utilization: Start context switch rcu_dyntick: Start 1 0 rcu_utilization: End context switch rcu_batch_start: rcu_preempt CBs=0/5 bl=10 rcu_dyntick: End 0 140000000000000 rcu_invoke_callback: rcu_preempt rhp=0xffff880071c0d600 func=proc_i_callback rcu_invoke_callback: rcu_preempt rhp=0xffff880077b5b230 func=__d_free rcu_dyntick: Start 140000000000000 0 rcu_invoke_callback: rcu_preempt rhp=0xffff880077563980 func=file_free_rcu rcu_batch_end: rcu_preempt CBs-invoked=3 idle=>c<>c<>c<>c< rcu_utilization: End RCU core rcu_grace_period: rcu_preempt 9741 start rcu_dyntick: Start 1 0 rcu_dyntick: End 0 140000000000000 rcu_dyntick: Start 140000000000000 0 Instead of: rcu_utilization: ffffffff81843110 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f32 rcu_batch_start: ffffffff81842f1d CBs=0/4 bl=10 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f3c rcu_grace_period: ffffffff81842f1d 9939 ffffffff81842f80 rcu_invoke_callback: ffffffff81842f1d rhp=0xffff88007888aac0 func=file_free_rcu rcu_grace_period: ffffffff81842f1d 9939 ffffffff81842f95 rcu_invoke_callback: ffffffff81842f1d rhp=0xffff88006aeb4600 func=proc_i_callback rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f32 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f3c rcu_invoke_callback: ffffffff81842f1d rhp=0xffff880071cb9fc0 func=__d_free rcu_grace_period: ffffffff81842f1d 9939 ffffffff81842f80 rcu_invoke_callback: ffffffff81842f1d rhp=0xffff88007888ae80 func=file_free_rcu rcu_batch_end: ffffffff81842f1d CBs-invoked=4 idle=>c<>c<>c<>c< rcu_utilization: ffffffff8184311f Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-13 01:18:47 +04:00
trace_rcu_utilization(TPS("Start boost kthread@init"));
for (;;) {
WRITE_ONCE(rnp->boost_kthread_status, RCU_KTHREAD_WAITING);
rcu: Have the RCU tracepoints use the tracepoint_string infrastructure Currently, RCU tracepoints save only a pointer to strings in the ring buffer. When displayed via the /sys/kernel/debug/tracing/trace file they are referenced like the printf "%s" that looks at the address in the ring buffer and prints out the string it points too. This requires that the strings are constant and persistent in the kernel. The problem with this is for tools like trace-cmd and perf that read the binary data from the buffers but have no access to the kernel memory to find out what string is represented by the address in the buffer. By using the tracepoint_string infrastructure, the RCU tracepoint strings can be exported such that userspace tools can map the addresses to the strings. # cat /sys/kernel/debug/tracing/printk_formats 0xffffffff81a4a0e8 : "rcu_preempt" 0xffffffff81a4a0f4 : "rcu_bh" 0xffffffff81a4a100 : "rcu_sched" 0xffffffff818437a0 : "cpuqs" 0xffffffff818437a6 : "rcu_sched" 0xffffffff818437a0 : "cpuqs" 0xffffffff818437b0 : "rcu_bh" 0xffffffff818437b7 : "Start context switch" 0xffffffff818437cc : "End context switch" 0xffffffff818437a0 : "cpuqs" [...] Now userspaces tools can display: rcu_utilization: Start context switch rcu_dyntick: Start 1 0 rcu_utilization: End context switch rcu_batch_start: rcu_preempt CBs=0/5 bl=10 rcu_dyntick: End 0 140000000000000 rcu_invoke_callback: rcu_preempt rhp=0xffff880071c0d600 func=proc_i_callback rcu_invoke_callback: rcu_preempt rhp=0xffff880077b5b230 func=__d_free rcu_dyntick: Start 140000000000000 0 rcu_invoke_callback: rcu_preempt rhp=0xffff880077563980 func=file_free_rcu rcu_batch_end: rcu_preempt CBs-invoked=3 idle=>c<>c<>c<>c< rcu_utilization: End RCU core rcu_grace_period: rcu_preempt 9741 start rcu_dyntick: Start 1 0 rcu_dyntick: End 0 140000000000000 rcu_dyntick: Start 140000000000000 0 Instead of: rcu_utilization: ffffffff81843110 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f32 rcu_batch_start: ffffffff81842f1d CBs=0/4 bl=10 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f3c rcu_grace_period: ffffffff81842f1d 9939 ffffffff81842f80 rcu_invoke_callback: ffffffff81842f1d rhp=0xffff88007888aac0 func=file_free_rcu rcu_grace_period: ffffffff81842f1d 9939 ffffffff81842f95 rcu_invoke_callback: ffffffff81842f1d rhp=0xffff88006aeb4600 func=proc_i_callback rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f32 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f3c rcu_invoke_callback: ffffffff81842f1d rhp=0xffff880071cb9fc0 func=__d_free rcu_grace_period: ffffffff81842f1d 9939 ffffffff81842f80 rcu_invoke_callback: ffffffff81842f1d rhp=0xffff88007888ae80 func=file_free_rcu rcu_batch_end: ffffffff81842f1d CBs-invoked=4 idle=>c<>c<>c<>c< rcu_utilization: ffffffff8184311f Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-13 01:18:47 +04:00
trace_rcu_utilization(TPS("End boost kthread@rcu_wait"));
rcu_wait(READ_ONCE(rnp->boost_tasks) ||
READ_ONCE(rnp->exp_tasks));
rcu: Have the RCU tracepoints use the tracepoint_string infrastructure Currently, RCU tracepoints save only a pointer to strings in the ring buffer. When displayed via the /sys/kernel/debug/tracing/trace file they are referenced like the printf "%s" that looks at the address in the ring buffer and prints out the string it points too. This requires that the strings are constant and persistent in the kernel. The problem with this is for tools like trace-cmd and perf that read the binary data from the buffers but have no access to the kernel memory to find out what string is represented by the address in the buffer. By using the tracepoint_string infrastructure, the RCU tracepoint strings can be exported such that userspace tools can map the addresses to the strings. # cat /sys/kernel/debug/tracing/printk_formats 0xffffffff81a4a0e8 : "rcu_preempt" 0xffffffff81a4a0f4 : "rcu_bh" 0xffffffff81a4a100 : "rcu_sched" 0xffffffff818437a0 : "cpuqs" 0xffffffff818437a6 : "rcu_sched" 0xffffffff818437a0 : "cpuqs" 0xffffffff818437b0 : "rcu_bh" 0xffffffff818437b7 : "Start context switch" 0xffffffff818437cc : "End context switch" 0xffffffff818437a0 : "cpuqs" [...] Now userspaces tools can display: rcu_utilization: Start context switch rcu_dyntick: Start 1 0 rcu_utilization: End context switch rcu_batch_start: rcu_preempt CBs=0/5 bl=10 rcu_dyntick: End 0 140000000000000 rcu_invoke_callback: rcu_preempt rhp=0xffff880071c0d600 func=proc_i_callback rcu_invoke_callback: rcu_preempt rhp=0xffff880077b5b230 func=__d_free rcu_dyntick: Start 140000000000000 0 rcu_invoke_callback: rcu_preempt rhp=0xffff880077563980 func=file_free_rcu rcu_batch_end: rcu_preempt CBs-invoked=3 idle=>c<>c<>c<>c< rcu_utilization: End RCU core rcu_grace_period: rcu_preempt 9741 start rcu_dyntick: Start 1 0 rcu_dyntick: End 0 140000000000000 rcu_dyntick: Start 140000000000000 0 Instead of: rcu_utilization: ffffffff81843110 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f32 rcu_batch_start: ffffffff81842f1d CBs=0/4 bl=10 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f3c rcu_grace_period: ffffffff81842f1d 9939 ffffffff81842f80 rcu_invoke_callback: ffffffff81842f1d rhp=0xffff88007888aac0 func=file_free_rcu rcu_grace_period: ffffffff81842f1d 9939 ffffffff81842f95 rcu_invoke_callback: ffffffff81842f1d rhp=0xffff88006aeb4600 func=proc_i_callback rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f32 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f3c rcu_invoke_callback: ffffffff81842f1d rhp=0xffff880071cb9fc0 func=__d_free rcu_grace_period: ffffffff81842f1d 9939 ffffffff81842f80 rcu_invoke_callback: ffffffff81842f1d rhp=0xffff88007888ae80 func=file_free_rcu rcu_batch_end: ffffffff81842f1d CBs-invoked=4 idle=>c<>c<>c<>c< rcu_utilization: ffffffff8184311f Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-13 01:18:47 +04:00
trace_rcu_utilization(TPS("Start boost kthread@rcu_wait"));
WRITE_ONCE(rnp->boost_kthread_status, RCU_KTHREAD_RUNNING);
more2boost = rcu_boost(rnp);
if (more2boost)
spincnt++;
else
spincnt = 0;
if (spincnt > 10) {
WRITE_ONCE(rnp->boost_kthread_status, RCU_KTHREAD_YIELDING);
rcu: Have the RCU tracepoints use the tracepoint_string infrastructure Currently, RCU tracepoints save only a pointer to strings in the ring buffer. When displayed via the /sys/kernel/debug/tracing/trace file they are referenced like the printf "%s" that looks at the address in the ring buffer and prints out the string it points too. This requires that the strings are constant and persistent in the kernel. The problem with this is for tools like trace-cmd and perf that read the binary data from the buffers but have no access to the kernel memory to find out what string is represented by the address in the buffer. By using the tracepoint_string infrastructure, the RCU tracepoint strings can be exported such that userspace tools can map the addresses to the strings. # cat /sys/kernel/debug/tracing/printk_formats 0xffffffff81a4a0e8 : "rcu_preempt" 0xffffffff81a4a0f4 : "rcu_bh" 0xffffffff81a4a100 : "rcu_sched" 0xffffffff818437a0 : "cpuqs" 0xffffffff818437a6 : "rcu_sched" 0xffffffff818437a0 : "cpuqs" 0xffffffff818437b0 : "rcu_bh" 0xffffffff818437b7 : "Start context switch" 0xffffffff818437cc : "End context switch" 0xffffffff818437a0 : "cpuqs" [...] Now userspaces tools can display: rcu_utilization: Start context switch rcu_dyntick: Start 1 0 rcu_utilization: End context switch rcu_batch_start: rcu_preempt CBs=0/5 bl=10 rcu_dyntick: End 0 140000000000000 rcu_invoke_callback: rcu_preempt rhp=0xffff880071c0d600 func=proc_i_callback rcu_invoke_callback: rcu_preempt rhp=0xffff880077b5b230 func=__d_free rcu_dyntick: Start 140000000000000 0 rcu_invoke_callback: rcu_preempt rhp=0xffff880077563980 func=file_free_rcu rcu_batch_end: rcu_preempt CBs-invoked=3 idle=>c<>c<>c<>c< rcu_utilization: End RCU core rcu_grace_period: rcu_preempt 9741 start rcu_dyntick: Start 1 0 rcu_dyntick: End 0 140000000000000 rcu_dyntick: Start 140000000000000 0 Instead of: rcu_utilization: ffffffff81843110 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f32 rcu_batch_start: ffffffff81842f1d CBs=0/4 bl=10 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f3c rcu_grace_period: ffffffff81842f1d 9939 ffffffff81842f80 rcu_invoke_callback: ffffffff81842f1d rhp=0xffff88007888aac0 func=file_free_rcu rcu_grace_period: ffffffff81842f1d 9939 ffffffff81842f95 rcu_invoke_callback: ffffffff81842f1d rhp=0xffff88006aeb4600 func=proc_i_callback rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f32 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f3c rcu_invoke_callback: ffffffff81842f1d rhp=0xffff880071cb9fc0 func=__d_free rcu_grace_period: ffffffff81842f1d 9939 ffffffff81842f80 rcu_invoke_callback: ffffffff81842f1d rhp=0xffff88007888ae80 func=file_free_rcu rcu_batch_end: ffffffff81842f1d CBs-invoked=4 idle=>c<>c<>c<>c< rcu_utilization: ffffffff8184311f Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-13 01:18:47 +04:00
trace_rcu_utilization(TPS("End boost kthread@rcu_yield"));
schedule_timeout_idle(2);
rcu: Have the RCU tracepoints use the tracepoint_string infrastructure Currently, RCU tracepoints save only a pointer to strings in the ring buffer. When displayed via the /sys/kernel/debug/tracing/trace file they are referenced like the printf "%s" that looks at the address in the ring buffer and prints out the string it points too. This requires that the strings are constant and persistent in the kernel. The problem with this is for tools like trace-cmd and perf that read the binary data from the buffers but have no access to the kernel memory to find out what string is represented by the address in the buffer. By using the tracepoint_string infrastructure, the RCU tracepoint strings can be exported such that userspace tools can map the addresses to the strings. # cat /sys/kernel/debug/tracing/printk_formats 0xffffffff81a4a0e8 : "rcu_preempt" 0xffffffff81a4a0f4 : "rcu_bh" 0xffffffff81a4a100 : "rcu_sched" 0xffffffff818437a0 : "cpuqs" 0xffffffff818437a6 : "rcu_sched" 0xffffffff818437a0 : "cpuqs" 0xffffffff818437b0 : "rcu_bh" 0xffffffff818437b7 : "Start context switch" 0xffffffff818437cc : "End context switch" 0xffffffff818437a0 : "cpuqs" [...] Now userspaces tools can display: rcu_utilization: Start context switch rcu_dyntick: Start 1 0 rcu_utilization: End context switch rcu_batch_start: rcu_preempt CBs=0/5 bl=10 rcu_dyntick: End 0 140000000000000 rcu_invoke_callback: rcu_preempt rhp=0xffff880071c0d600 func=proc_i_callback rcu_invoke_callback: rcu_preempt rhp=0xffff880077b5b230 func=__d_free rcu_dyntick: Start 140000000000000 0 rcu_invoke_callback: rcu_preempt rhp=0xffff880077563980 func=file_free_rcu rcu_batch_end: rcu_preempt CBs-invoked=3 idle=>c<>c<>c<>c< rcu_utilization: End RCU core rcu_grace_period: rcu_preempt 9741 start rcu_dyntick: Start 1 0 rcu_dyntick: End 0 140000000000000 rcu_dyntick: Start 140000000000000 0 Instead of: rcu_utilization: ffffffff81843110 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f32 rcu_batch_start: ffffffff81842f1d CBs=0/4 bl=10 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f3c rcu_grace_period: ffffffff81842f1d 9939 ffffffff81842f80 rcu_invoke_callback: ffffffff81842f1d rhp=0xffff88007888aac0 func=file_free_rcu rcu_grace_period: ffffffff81842f1d 9939 ffffffff81842f95 rcu_invoke_callback: ffffffff81842f1d rhp=0xffff88006aeb4600 func=proc_i_callback rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f32 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f3c rcu_invoke_callback: ffffffff81842f1d rhp=0xffff880071cb9fc0 func=__d_free rcu_grace_period: ffffffff81842f1d 9939 ffffffff81842f80 rcu_invoke_callback: ffffffff81842f1d rhp=0xffff88007888ae80 func=file_free_rcu rcu_batch_end: ffffffff81842f1d CBs-invoked=4 idle=>c<>c<>c<>c< rcu_utilization: ffffffff8184311f Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-13 01:18:47 +04:00
trace_rcu_utilization(TPS("Start boost kthread@rcu_yield"));
spincnt = 0;
}
}
/* NOTREACHED */
rcu: Have the RCU tracepoints use the tracepoint_string infrastructure Currently, RCU tracepoints save only a pointer to strings in the ring buffer. When displayed via the /sys/kernel/debug/tracing/trace file they are referenced like the printf "%s" that looks at the address in the ring buffer and prints out the string it points too. This requires that the strings are constant and persistent in the kernel. The problem with this is for tools like trace-cmd and perf that read the binary data from the buffers but have no access to the kernel memory to find out what string is represented by the address in the buffer. By using the tracepoint_string infrastructure, the RCU tracepoint strings can be exported such that userspace tools can map the addresses to the strings. # cat /sys/kernel/debug/tracing/printk_formats 0xffffffff81a4a0e8 : "rcu_preempt" 0xffffffff81a4a0f4 : "rcu_bh" 0xffffffff81a4a100 : "rcu_sched" 0xffffffff818437a0 : "cpuqs" 0xffffffff818437a6 : "rcu_sched" 0xffffffff818437a0 : "cpuqs" 0xffffffff818437b0 : "rcu_bh" 0xffffffff818437b7 : "Start context switch" 0xffffffff818437cc : "End context switch" 0xffffffff818437a0 : "cpuqs" [...] Now userspaces tools can display: rcu_utilization: Start context switch rcu_dyntick: Start 1 0 rcu_utilization: End context switch rcu_batch_start: rcu_preempt CBs=0/5 bl=10 rcu_dyntick: End 0 140000000000000 rcu_invoke_callback: rcu_preempt rhp=0xffff880071c0d600 func=proc_i_callback rcu_invoke_callback: rcu_preempt rhp=0xffff880077b5b230 func=__d_free rcu_dyntick: Start 140000000000000 0 rcu_invoke_callback: rcu_preempt rhp=0xffff880077563980 func=file_free_rcu rcu_batch_end: rcu_preempt CBs-invoked=3 idle=>c<>c<>c<>c< rcu_utilization: End RCU core rcu_grace_period: rcu_preempt 9741 start rcu_dyntick: Start 1 0 rcu_dyntick: End 0 140000000000000 rcu_dyntick: Start 140000000000000 0 Instead of: rcu_utilization: ffffffff81843110 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f32 rcu_batch_start: ffffffff81842f1d CBs=0/4 bl=10 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f3c rcu_grace_period: ffffffff81842f1d 9939 ffffffff81842f80 rcu_invoke_callback: ffffffff81842f1d rhp=0xffff88007888aac0 func=file_free_rcu rcu_grace_period: ffffffff81842f1d 9939 ffffffff81842f95 rcu_invoke_callback: ffffffff81842f1d rhp=0xffff88006aeb4600 func=proc_i_callback rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f32 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f3c rcu_invoke_callback: ffffffff81842f1d rhp=0xffff880071cb9fc0 func=__d_free rcu_grace_period: ffffffff81842f1d 9939 ffffffff81842f80 rcu_invoke_callback: ffffffff81842f1d rhp=0xffff88007888ae80 func=file_free_rcu rcu_batch_end: ffffffff81842f1d CBs-invoked=4 idle=>c<>c<>c<>c< rcu_utilization: ffffffff8184311f Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-13 01:18:47 +04:00
trace_rcu_utilization(TPS("End boost kthread@notreached"));
return 0;
}
/*
* Check to see if it is time to start boosting RCU readers that are
* blocking the current grace period, and, if so, tell the per-rcu_node
* kthread to start boosting them. If there is an expedited grace
* period in progress, it is always time to boost.
*
* The caller must hold rnp->lock, which this function releases.
* The ->boost_kthread_task is immortal, so we don't need to worry
* about it going away.
*/
static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags)
__releases(rnp->lock)
{
raw_lockdep_assert_held_rcu_node(rnp);
if (!rcu_preempt_blocked_readers_cgp(rnp) && rnp->exp_tasks == NULL) {
raw_spin_unlock_irqrestore_rcu_node(rnp, flags);
return;
}
if (rnp->exp_tasks != NULL ||
(rnp->gp_tasks != NULL &&
rnp->boost_tasks == NULL &&
rnp->qsmask == 0 &&
(!time_after(rnp->boost_time, jiffies) || rcu_state.cbovld))) {
if (rnp->exp_tasks == NULL)
WRITE_ONCE(rnp->boost_tasks, rnp->gp_tasks);
raw_spin_unlock_irqrestore_rcu_node(rnp, flags);
rcu_wake_cond(rnp->boost_kthread_task,
READ_ONCE(rnp->boost_kthread_status));
} else {
raw_spin_unlock_irqrestore_rcu_node(rnp, flags);
}
}
/*
* Is the current CPU running the RCU-callbacks kthread?
* Caller must have preemption disabled.
*/
static bool rcu_is_callbacks_kthread(void)
{
return __this_cpu_read(rcu_data.rcu_cpu_kthread_task) == current;
}
#define RCU_BOOST_DELAY_JIFFIES DIV_ROUND_UP(CONFIG_RCU_BOOST_DELAY * HZ, 1000)
/*
* Do priority-boost accounting for the start of a new grace period.
*/
static void rcu_preempt_boost_start_gp(struct rcu_node *rnp)
{
rnp->boost_time = jiffies + RCU_BOOST_DELAY_JIFFIES;
}
/*
* Create an RCU-boost kthread for the specified node if one does not
* already exist. We only create this kthread for preemptible RCU.
* Returns zero if all is well, a negated errno otherwise.
*/
static void rcu_spawn_one_boost_kthread(struct rcu_node *rnp)
{
int rnp_index = rnp - rcu_get_root();
unsigned long flags;
struct sched_param sp;
struct task_struct *t;
if (!IS_ENABLED(CONFIG_PREEMPT_RCU))
return;
rcu: Yield simpler The rcu_yield() code is amazing. It's there to avoid starvation of the system when lots of (boosting) work is to be done. Now looking at the code it's functionality is: Make the thread SCHED_OTHER and very nice, i.e. get it out of the way Arm a timer with 2 ticks schedule() Now if the system goes idle the rcu task returns, regains SCHED_FIFO and plugs on. If the systems stays busy the timer fires and wakes a per node kthread which in turn makes the per cpu thread SCHED_FIFO and brings it back on the cpu. For the boosting thread the "make it FIFO" bit is missing and it just runs some magic boost checks. Now this is a lot of code with extra threads and complexity. It's way simpler to let the tasks when they detect overload schedule away for 2 ticks and defer the normal wakeup as long as they are in yielded state and the cpu is not idle. That solves the same problem and the only difference is that when the cpu goes idle it's not guaranteed that the thread returns right away, but it won't be longer out than two ticks, so no harm is done. If that's an issue than it is way simpler just to wake the task from idle as RCU has callbacks there anyway. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120716103948.131256723@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-07-16 14:42:35 +04:00
rcu: Process offlining and onlining only at grace-period start Races between CPU hotplug and grace periods can be difficult to resolve, so the ->onoff_mutex is used to exclude the two events. Unfortunately, this means that it is impossible for an outgoing CPU to perform the last bits of its offlining from its last pass through the idle loop, because sleeplocks cannot be acquired in that context. This commit avoids these problems by buffering online and offline events in a new ->qsmaskinitnext field in the leaf rcu_node structures. When a grace period starts, the events accumulated in this mask are applied to the ->qsmaskinit field, and, if needed, up the rcu_node tree. The special case of all CPUs corresponding to a given leaf rcu_node structure being offline while there are still elements in that structure's ->blkd_tasks list is handled using a new ->wait_blkd_tasks field. In this case, propagating the offline bits up the tree is deferred until the beginning of the grace period after all of the tasks have exited their RCU read-side critical sections and removed themselves from the list, at which point the ->wait_blkd_tasks flag is cleared. If one of that leaf rcu_node structure's CPUs comes back online before the list empties, then the ->wait_blkd_tasks flag is simply cleared. This of course means that RCU's notion of which CPUs are offline can be out of date. This is OK because RCU need only wait on CPUs that were online at the time that the grace period started. In addition, RCU's force-quiescent-state actions will handle the case where a CPU goes offline after the grace period starts. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-01-24 08:52:37 +03:00
if (!rcu_scheduler_fully_active || rcu_rnp_online_cpus(rnp) == 0)
return;
rcu: Yield simpler The rcu_yield() code is amazing. It's there to avoid starvation of the system when lots of (boosting) work is to be done. Now looking at the code it's functionality is: Make the thread SCHED_OTHER and very nice, i.e. get it out of the way Arm a timer with 2 ticks schedule() Now if the system goes idle the rcu task returns, regains SCHED_FIFO and plugs on. If the systems stays busy the timer fires and wakes a per node kthread which in turn makes the per cpu thread SCHED_FIFO and brings it back on the cpu. For the boosting thread the "make it FIFO" bit is missing and it just runs some magic boost checks. Now this is a lot of code with extra threads and complexity. It's way simpler to let the tasks when they detect overload schedule away for 2 ticks and defer the normal wakeup as long as they are in yielded state and the cpu is not idle. That solves the same problem and the only difference is that when the cpu goes idle it's not guaranteed that the thread returns right away, but it won't be longer out than two ticks, so no harm is done. If that's an issue than it is way simpler just to wake the task from idle as RCU has callbacks there anyway. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120716103948.131256723@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-07-16 14:42:35 +04:00
rcu_state.boost = 1;
if (rnp->boost_kthread_task != NULL)
return;
t = kthread_create(rcu_boost_kthread, (void *)rnp,
"rcub/%d", rnp_index);
if (WARN_ON_ONCE(IS_ERR(t)))
return;
raw_spin_lock_irqsave_rcu_node(rnp, flags);
rnp->boost_kthread_task = t;
raw_spin_unlock_irqrestore_rcu_node(rnp, flags);
sp.sched_priority = kthread_prio;
sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
wake_up_process(t); /* get to TASK_INTERRUPTIBLE quickly. */
}
/*
* Set the per-rcu_node kthread's affinity to cover all CPUs that are
* served by the rcu_node in question. The CPU hotplug lock is still
* held, so the value of rnp->qsmaskinit will be stable.
*
* We don't include outgoingcpu in the affinity set, use -1 if there is
* no outgoing CPU. If there are no CPUs left in the affinity set,
* this function allows the kthread to execute on any CPU.
*/
rcu: Yield simpler The rcu_yield() code is amazing. It's there to avoid starvation of the system when lots of (boosting) work is to be done. Now looking at the code it's functionality is: Make the thread SCHED_OTHER and very nice, i.e. get it out of the way Arm a timer with 2 ticks schedule() Now if the system goes idle the rcu task returns, regains SCHED_FIFO and plugs on. If the systems stays busy the timer fires and wakes a per node kthread which in turn makes the per cpu thread SCHED_FIFO and brings it back on the cpu. For the boosting thread the "make it FIFO" bit is missing and it just runs some magic boost checks. Now this is a lot of code with extra threads and complexity. It's way simpler to let the tasks when they detect overload schedule away for 2 ticks and defer the normal wakeup as long as they are in yielded state and the cpu is not idle. That solves the same problem and the only difference is that when the cpu goes idle it's not guaranteed that the thread returns right away, but it won't be longer out than two ticks, so no harm is done. If that's an issue than it is way simpler just to wake the task from idle as RCU has callbacks there anyway. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120716103948.131256723@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-07-16 14:42:35 +04:00
static void rcu_boost_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu)
{
rcu: Yield simpler The rcu_yield() code is amazing. It's there to avoid starvation of the system when lots of (boosting) work is to be done. Now looking at the code it's functionality is: Make the thread SCHED_OTHER and very nice, i.e. get it out of the way Arm a timer with 2 ticks schedule() Now if the system goes idle the rcu task returns, regains SCHED_FIFO and plugs on. If the systems stays busy the timer fires and wakes a per node kthread which in turn makes the per cpu thread SCHED_FIFO and brings it back on the cpu. For the boosting thread the "make it FIFO" bit is missing and it just runs some magic boost checks. Now this is a lot of code with extra threads and complexity. It's way simpler to let the tasks when they detect overload schedule away for 2 ticks and defer the normal wakeup as long as they are in yielded state and the cpu is not idle. That solves the same problem and the only difference is that when the cpu goes idle it's not guaranteed that the thread returns right away, but it won't be longer out than two ticks, so no harm is done. If that's an issue than it is way simpler just to wake the task from idle as RCU has callbacks there anyway. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120716103948.131256723@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-07-16 14:42:35 +04:00
struct task_struct *t = rnp->boost_kthread_task;
rcu: Process offlining and onlining only at grace-period start Races between CPU hotplug and grace periods can be difficult to resolve, so the ->onoff_mutex is used to exclude the two events. Unfortunately, this means that it is impossible for an outgoing CPU to perform the last bits of its offlining from its last pass through the idle loop, because sleeplocks cannot be acquired in that context. This commit avoids these problems by buffering online and offline events in a new ->qsmaskinitnext field in the leaf rcu_node structures. When a grace period starts, the events accumulated in this mask are applied to the ->qsmaskinit field, and, if needed, up the rcu_node tree. The special case of all CPUs corresponding to a given leaf rcu_node structure being offline while there are still elements in that structure's ->blkd_tasks list is handled using a new ->wait_blkd_tasks field. In this case, propagating the offline bits up the tree is deferred until the beginning of the grace period after all of the tasks have exited their RCU read-side critical sections and removed themselves from the list, at which point the ->wait_blkd_tasks flag is cleared. If one of that leaf rcu_node structure's CPUs comes back online before the list empties, then the ->wait_blkd_tasks flag is simply cleared. This of course means that RCU's notion of which CPUs are offline can be out of date. This is OK because RCU need only wait on CPUs that were online at the time that the grace period started. In addition, RCU's force-quiescent-state actions will handle the case where a CPU goes offline after the grace period starts. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-01-24 08:52:37 +03:00
unsigned long mask = rcu_rnp_online_cpus(rnp);
cpumask_var_t cm;
int cpu;
rcu: Yield simpler The rcu_yield() code is amazing. It's there to avoid starvation of the system when lots of (boosting) work is to be done. Now looking at the code it's functionality is: Make the thread SCHED_OTHER and very nice, i.e. get it out of the way Arm a timer with 2 ticks schedule() Now if the system goes idle the rcu task returns, regains SCHED_FIFO and plugs on. If the systems stays busy the timer fires and wakes a per node kthread which in turn makes the per cpu thread SCHED_FIFO and brings it back on the cpu. For the boosting thread the "make it FIFO" bit is missing and it just runs some magic boost checks. Now this is a lot of code with extra threads and complexity. It's way simpler to let the tasks when they detect overload schedule away for 2 ticks and defer the normal wakeup as long as they are in yielded state and the cpu is not idle. That solves the same problem and the only difference is that when the cpu goes idle it's not guaranteed that the thread returns right away, but it won't be longer out than two ticks, so no harm is done. If that's an issue than it is way simpler just to wake the task from idle as RCU has callbacks there anyway. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120716103948.131256723@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-07-16 14:42:35 +04:00
if (!t)
return;
rcu: Yield simpler The rcu_yield() code is amazing. It's there to avoid starvation of the system when lots of (boosting) work is to be done. Now looking at the code it's functionality is: Make the thread SCHED_OTHER and very nice, i.e. get it out of the way Arm a timer with 2 ticks schedule() Now if the system goes idle the rcu task returns, regains SCHED_FIFO and plugs on. If the systems stays busy the timer fires and wakes a per node kthread which in turn makes the per cpu thread SCHED_FIFO and brings it back on the cpu. For the boosting thread the "make it FIFO" bit is missing and it just runs some magic boost checks. Now this is a lot of code with extra threads and complexity. It's way simpler to let the tasks when they detect overload schedule away for 2 ticks and defer the normal wakeup as long as they are in yielded state and the cpu is not idle. That solves the same problem and the only difference is that when the cpu goes idle it's not guaranteed that the thread returns right away, but it won't be longer out than two ticks, so no harm is done. If that's an issue than it is way simpler just to wake the task from idle as RCU has callbacks there anyway. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120716103948.131256723@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-07-16 14:42:35 +04:00
if (!zalloc_cpumask_var(&cm, GFP_KERNEL))
return;
rcu: Correctly handle sparse possible cpus In many cases in the RCU tree code, we iterate over the set of cpus for a leaf node described by rcu_node::grplo and rcu_node::grphi, checking per-cpu data for each cpu in this range. However, if the set of possible cpus is sparse, some cpus described in this range are not possible, and thus no per-cpu region will have been allocated (or initialised) for them by the generic percpu code. Erroneous accesses to a per-cpu area for these !possible cpus may fault or may hit other data depending on the addressed generated when the erroneous per cpu offset is applied. In practice, both cases have been observed on arm64 hardware (the former being silent, but detectable with additional patches). To avoid issues resulting from this, we must iterate over the set of *possible* cpus for a given leaf node. This patch add a new helper, for_each_leaf_node_possible_cpu, to enable this. As iteration is often intertwined with rcu_node local bitmask manipulation, a new leaf_node_cpu_bit helper is added to make this simpler and more consistent. The RCU tree code is made to use both of these where appropriate. Without this patch, running reboot at a shell can result in an oops like: [ 3369.075979] Unable to handle kernel paging request at virtual address ffffff8008b21b4c [ 3369.083881] pgd = ffffffc3ecdda000 [ 3369.087270] [ffffff8008b21b4c] *pgd=00000083eca48003, *pud=00000083eca48003, *pmd=0000000000000000 [ 3369.096222] Internal error: Oops: 96000007 [#1] PREEMPT SMP [ 3369.101781] Modules linked in: [ 3369.104825] CPU: 2 PID: 1817 Comm: NetworkManager Tainted: G W 4.6.0+ #3 [ 3369.121239] task: ffffffc0fa13e000 ti: ffffffc3eb940000 task.ti: ffffffc3eb940000 [ 3369.128708] PC is at sync_rcu_exp_select_cpus+0x188/0x510 [ 3369.134094] LR is at sync_rcu_exp_select_cpus+0x104/0x510 [ 3369.139479] pc : [<ffffff80081109a8>] lr : [<ffffff8008110924>] pstate: 200001c5 [ 3369.146860] sp : ffffffc3eb9435a0 [ 3369.150162] x29: ffffffc3eb9435a0 x28: ffffff8008be4f88 [ 3369.155465] x27: ffffff8008b66c80 x26: ffffffc3eceb2600 [ 3369.160767] x25: 0000000000000001 x24: ffffff8008be4f88 [ 3369.166070] x23: ffffff8008b51c3c x22: ffffff8008b66c80 [ 3369.171371] x21: 0000000000000001 x20: ffffff8008b21b40 [ 3369.176673] x19: ffffff8008b66c80 x18: 0000000000000000 [ 3369.181975] x17: 0000007fa951a010 x16: ffffff80086a30f0 [ 3369.187278] x15: 0000007fa9505590 x14: 0000000000000000 [ 3369.192580] x13: ffffff8008b51000 x12: ffffffc3eb940000 [ 3369.197882] x11: 0000000000000006 x10: ffffff8008b51b78 [ 3369.203184] x9 : 0000000000000001 x8 : ffffff8008be4000 [ 3369.208486] x7 : ffffff8008b21b40 x6 : 0000000000001003 [ 3369.213788] x5 : 0000000000000000 x4 : ffffff8008b27280 [ 3369.219090] x3 : ffffff8008b21b4c x2 : 0000000000000001 [ 3369.224406] x1 : 0000000000000001 x0 : 0000000000000140 ... [ 3369.972257] [<ffffff80081109a8>] sync_rcu_exp_select_cpus+0x188/0x510 [ 3369.978685] [<ffffff80081128b4>] synchronize_rcu_expedited+0x64/0xa8 [ 3369.985026] [<ffffff80086b987c>] synchronize_net+0x24/0x30 [ 3369.990499] [<ffffff80086ddb54>] dev_deactivate_many+0x28c/0x298 [ 3369.996493] [<ffffff80086b6bb8>] __dev_close_many+0x60/0xd0 [ 3370.002052] [<ffffff80086b6d48>] __dev_close+0x28/0x40 [ 3370.007178] [<ffffff80086bf62c>] __dev_change_flags+0x8c/0x158 [ 3370.012999] [<ffffff80086bf718>] dev_change_flags+0x20/0x60 [ 3370.018558] [<ffffff80086cf7f0>] do_setlink+0x288/0x918 [ 3370.023771] [<ffffff80086d0798>] rtnl_newlink+0x398/0x6a8 [ 3370.029158] [<ffffff80086cee84>] rtnetlink_rcv_msg+0xe4/0x220 [ 3370.034891] [<ffffff80086e274c>] netlink_rcv_skb+0xc4/0xf8 [ 3370.040364] [<ffffff80086ced8c>] rtnetlink_rcv+0x2c/0x40 [ 3370.045663] [<ffffff80086e1fe8>] netlink_unicast+0x160/0x238 [ 3370.051309] [<ffffff80086e24b8>] netlink_sendmsg+0x2f0/0x358 [ 3370.056956] [<ffffff80086a0070>] sock_sendmsg+0x18/0x30 [ 3370.062168] [<ffffff80086a21cc>] ___sys_sendmsg+0x26c/0x280 [ 3370.067728] [<ffffff80086a30ac>] __sys_sendmsg+0x44/0x88 [ 3370.073027] [<ffffff80086a3100>] SyS_sendmsg+0x10/0x20 [ 3370.078153] [<ffffff8008085e70>] el0_svc_naked+0x24/0x28 Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reported-by: Dennis Chen <dennis.chen@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Steve Capper <steve.capper@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-06-03 17:20:04 +03:00
for_each_leaf_node_possible_cpu(rnp, cpu)
if ((mask & leaf_node_cpu_bit(rnp, cpu)) &&
cpu != outgoingcpu)
cpumask_set_cpu(cpu, cm);
if (cpumask_weight(cm) == 0)
cpumask_setall(cm);
rcu: Yield simpler The rcu_yield() code is amazing. It's there to avoid starvation of the system when lots of (boosting) work is to be done. Now looking at the code it's functionality is: Make the thread SCHED_OTHER and very nice, i.e. get it out of the way Arm a timer with 2 ticks schedule() Now if the system goes idle the rcu task returns, regains SCHED_FIFO and plugs on. If the systems stays busy the timer fires and wakes a per node kthread which in turn makes the per cpu thread SCHED_FIFO and brings it back on the cpu. For the boosting thread the "make it FIFO" bit is missing and it just runs some magic boost checks. Now this is a lot of code with extra threads and complexity. It's way simpler to let the tasks when they detect overload schedule away for 2 ticks and defer the normal wakeup as long as they are in yielded state and the cpu is not idle. That solves the same problem and the only difference is that when the cpu goes idle it's not guaranteed that the thread returns right away, but it won't be longer out than two ticks, so no harm is done. If that's an issue than it is way simpler just to wake the task from idle as RCU has callbacks there anyway. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120716103948.131256723@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-07-16 14:42:35 +04:00
set_cpus_allowed_ptr(t, cm);
free_cpumask_var(cm);
}
/*
* Spawn boost kthreads -- called as soon as the scheduler is running.
*/
static void __init rcu_spawn_boost_kthreads(void)
{
struct rcu_node *rnp;
rcu_for_each_leaf_node(rnp)
rcu_spawn_one_boost_kthread(rnp);
}
static void rcu_prepare_kthreads(int cpu)
{
struct rcu_data *rdp = per_cpu_ptr(&rcu_data, cpu);
struct rcu_node *rnp = rdp->mynode;
/* Fire up the incoming CPU's kthread and leaf rcu_node kthread. */
if (rcu_scheduler_fully_active)
rcu_spawn_one_boost_kthread(rnp);
}
#else /* #ifdef CONFIG_RCU_BOOST */
static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags)
__releases(rnp->lock)
{
raw_spin_unlock_irqrestore_rcu_node(rnp, flags);
}
static bool rcu_is_callbacks_kthread(void)
{
return false;
}
static void rcu_preempt_boost_start_gp(struct rcu_node *rnp)
{
}
rcu: Yield simpler The rcu_yield() code is amazing. It's there to avoid starvation of the system when lots of (boosting) work is to be done. Now looking at the code it's functionality is: Make the thread SCHED_OTHER and very nice, i.e. get it out of the way Arm a timer with 2 ticks schedule() Now if the system goes idle the rcu task returns, regains SCHED_FIFO and plugs on. If the systems stays busy the timer fires and wakes a per node kthread which in turn makes the per cpu thread SCHED_FIFO and brings it back on the cpu. For the boosting thread the "make it FIFO" bit is missing and it just runs some magic boost checks. Now this is a lot of code with extra threads and complexity. It's way simpler to let the tasks when they detect overload schedule away for 2 ticks and defer the normal wakeup as long as they are in yielded state and the cpu is not idle. That solves the same problem and the only difference is that when the cpu goes idle it's not guaranteed that the thread returns right away, but it won't be longer out than two ticks, so no harm is done. If that's an issue than it is way simpler just to wake the task from idle as RCU has callbacks there anyway. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120716103948.131256723@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-07-16 14:42:35 +04:00
static void rcu_boost_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu)
{
}
static void __init rcu_spawn_boost_kthreads(void)
{
}
static void rcu_prepare_kthreads(int cpu)
{
}
#endif /* #else #ifdef CONFIG_RCU_BOOST */
rcu: Accelerate grace period if last non-dynticked CPU Currently, rcu_needs_cpu() simply checks whether the current CPU has an outstanding RCU callback, which means that the last CPU to go into dyntick-idle mode might wait a few ticks for the relevant grace periods to complete. However, if all the other CPUs are in dyntick-idle mode, and if this CPU is in a quiescent state (which it is for RCU-bh and RCU-sched any time that we are considering going into dyntick-idle mode), then the grace period is instantly complete. This patch therefore repeatedly invokes the RCU grace-period machinery in order to force any needed grace periods to complete quickly. It does so a limited number of times in order to prevent starvation by an RCU callback function that might pass itself to call_rcu(). However, if any CPU other than the current one is not in dyntick-idle mode, fall back to simply checking (with fix to bug noted by Lai Jiangshan). Also, take advantage of last grace-period forcing, the opportunity to do so noted by Steve Rostedt. And apply simplified #ifdef condition suggested by Frederic Weisbecker. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1266887105-1528-15-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-23 04:04:59 +03:00
#if !defined(CONFIG_RCU_FAST_NO_HZ)
/*
* Check to see if any future non-offloaded RCU-related work will need
* to be done by the current CPU, even if none need be done immediately,
* returning 1 if so. This function is part of the RCU implementation;
* it is -not- an exported member of the RCU API.
rcu: Accelerate grace period if last non-dynticked CPU Currently, rcu_needs_cpu() simply checks whether the current CPU has an outstanding RCU callback, which means that the last CPU to go into dyntick-idle mode might wait a few ticks for the relevant grace periods to complete. However, if all the other CPUs are in dyntick-idle mode, and if this CPU is in a quiescent state (which it is for RCU-bh and RCU-sched any time that we are considering going into dyntick-idle mode), then the grace period is instantly complete. This patch therefore repeatedly invokes the RCU grace-period machinery in order to force any needed grace periods to complete quickly. It does so a limited number of times in order to prevent starvation by an RCU callback function that might pass itself to call_rcu(). However, if any CPU other than the current one is not in dyntick-idle mode, fall back to simply checking (with fix to bug noted by Lai Jiangshan). Also, take advantage of last grace-period forcing, the opportunity to do so noted by Steve Rostedt. And apply simplified #ifdef condition suggested by Frederic Weisbecker. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1266887105-1528-15-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-23 04:04:59 +03:00
*
* Because we not have RCU_FAST_NO_HZ, just check whether or not this
* CPU has RCU callbacks queued.
rcu: Accelerate grace period if last non-dynticked CPU Currently, rcu_needs_cpu() simply checks whether the current CPU has an outstanding RCU callback, which means that the last CPU to go into dyntick-idle mode might wait a few ticks for the relevant grace periods to complete. However, if all the other CPUs are in dyntick-idle mode, and if this CPU is in a quiescent state (which it is for RCU-bh and RCU-sched any time that we are considering going into dyntick-idle mode), then the grace period is instantly complete. This patch therefore repeatedly invokes the RCU grace-period machinery in order to force any needed grace periods to complete quickly. It does so a limited number of times in order to prevent starvation by an RCU callback function that might pass itself to call_rcu(). However, if any CPU other than the current one is not in dyntick-idle mode, fall back to simply checking (with fix to bug noted by Lai Jiangshan). Also, take advantage of last grace-period forcing, the opportunity to do so noted by Steve Rostedt. And apply simplified #ifdef condition suggested by Frederic Weisbecker. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1266887105-1528-15-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-23 04:04:59 +03:00
*/
int rcu_needs_cpu(u64 basemono, u64 *nextevt)
rcu: Accelerate grace period if last non-dynticked CPU Currently, rcu_needs_cpu() simply checks whether the current CPU has an outstanding RCU callback, which means that the last CPU to go into dyntick-idle mode might wait a few ticks for the relevant grace periods to complete. However, if all the other CPUs are in dyntick-idle mode, and if this CPU is in a quiescent state (which it is for RCU-bh and RCU-sched any time that we are considering going into dyntick-idle mode), then the grace period is instantly complete. This patch therefore repeatedly invokes the RCU grace-period machinery in order to force any needed grace periods to complete quickly. It does so a limited number of times in order to prevent starvation by an RCU callback function that might pass itself to call_rcu(). However, if any CPU other than the current one is not in dyntick-idle mode, fall back to simply checking (with fix to bug noted by Lai Jiangshan). Also, take advantage of last grace-period forcing, the opportunity to do so noted by Steve Rostedt. And apply simplified #ifdef condition suggested by Frederic Weisbecker. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1266887105-1528-15-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-23 04:04:59 +03:00
{
*nextevt = KTIME_MAX;
return !rcu_segcblist_empty(&this_cpu_ptr(&rcu_data)->cblist) &&
!rcu_segcblist_is_offloaded(&this_cpu_ptr(&rcu_data)->cblist);
}
/*
* Because we do not have RCU_FAST_NO_HZ, don't bother cleaning up
* after it.
*/
static void rcu_cleanup_after_idle(void)
{
}
/*
* Do the idle-entry grace-period work, which, because CONFIG_RCU_FAST_NO_HZ=n,
* is nothing.
*/
static void rcu_prepare_for_idle(void)
{
}
rcu: Accelerate grace period if last non-dynticked CPU Currently, rcu_needs_cpu() simply checks whether the current CPU has an outstanding RCU callback, which means that the last CPU to go into dyntick-idle mode might wait a few ticks for the relevant grace periods to complete. However, if all the other CPUs are in dyntick-idle mode, and if this CPU is in a quiescent state (which it is for RCU-bh and RCU-sched any time that we are considering going into dyntick-idle mode), then the grace period is instantly complete. This patch therefore repeatedly invokes the RCU grace-period machinery in order to force any needed grace periods to complete quickly. It does so a limited number of times in order to prevent starvation by an RCU callback function that might pass itself to call_rcu(). However, if any CPU other than the current one is not in dyntick-idle mode, fall back to simply checking (with fix to bug noted by Lai Jiangshan). Also, take advantage of last grace-period forcing, the opportunity to do so noted by Steve Rostedt. And apply simplified #ifdef condition suggested by Frederic Weisbecker. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1266887105-1528-15-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-23 04:04:59 +03:00
#else /* #if !defined(CONFIG_RCU_FAST_NO_HZ) */
/*
* This code is invoked when a CPU goes idle, at which point we want
* to have the CPU do everything required for RCU so that it can enter
* the energy-efficient dyntick-idle mode.
*
* The following preprocessor symbol controls this:
*
* RCU_IDLE_GP_DELAY gives the number of jiffies that a CPU is permitted
* to sleep in dyntick-idle mode with RCU callbacks pending. This
* is sized to be roughly one RCU grace period. Those energy-efficiency
* benchmarkers who might otherwise be tempted to set this to a large
* number, be warned: Setting RCU_IDLE_GP_DELAY too high can hang your
* system. And if you are -that- concerned about energy efficiency,
* just power the system down and be done with it!
*
* The value below works well in practice. If future workloads require
* adjustment, they can be converted into kernel config parameters, though
* making the state machine smarter might be a better option.
*/
#define RCU_IDLE_GP_DELAY 4 /* Roughly one grace period. */
static int rcu_idle_gp_delay = RCU_IDLE_GP_DELAY;
module_param(rcu_idle_gp_delay, int, 0644);
/*
* Try to advance callbacks on the current CPU, but only if it has been
* awhile since the last time we did so. Afterwards, if there are any
* callbacks ready for immediate invocation, return true.
*/
static bool __maybe_unused rcu_try_advance_all_cbs(void)
{
bool cbs_ready = false;
struct rcu_data *rdp = this_cpu_ptr(&rcu_data);
struct rcu_node *rnp;
/* Exit early if we advanced recently. */
if (jiffies == rdp->last_advance_all)
return false;
rdp->last_advance_all = jiffies;
rnp = rdp->mynode;
/*
* Don't bother checking unless a grace period has
* completed since we last checked and there are
* callbacks not yet ready to invoke.
*/
if ((rcu_seq_completed_gp(rdp->gp_seq,
rcu_seq_current(&rnp->gp_seq)) ||
unlikely(READ_ONCE(rdp->gpwrap))) &&
rcu_segcblist_pend_cbs(&rdp->cblist))
note_gp_changes(rdp);
if (rcu_segcblist_ready_cbs(&rdp->cblist))
cbs_ready = true;
return cbs_ready;
}
rcu: Precompute RCU_FAST_NO_HZ timer offsets When a CPU is entering dyntick-idle mode, tick_nohz_stop_sched_tick() calls rcu_needs_cpu() see if RCU needs that CPU, and, if not, computes the next wakeup time based on the timer wheels. Only later, when actually entering the idle loop, rcu_prepare_for_idle() will be invoked. In some cases, rcu_prepare_for_idle() will post timers to wake the CPU back up. But all for naught: The next wakeup time for the CPU has already been computed, and posting a timer afterwards does not force that wakeup time to be recomputed. This means that rcu_prepare_for_idle()'s have no effect. This is not a problem on a busy system because something else will wake up the CPU soon enough. However, on lightly loaded systems, the CPU might stay asleep for a considerable length of time. If that CPU has a callback that the rest of the system is waiting on, the system might run very slowly or (in theory) even hang. This commit avoids this problem by having rcu_needs_cpu() give tick_nohz_stop_sched_tick() an estimate of when RCU will need the CPU to wake back up, which tick_nohz_stop_sched_tick() takes into account when programming the CPU's wakeup time. An alternative approach is for rcu_prepare_for_idle() to use hrtimers instead of normal timers, but timers are much more efficient than are hrtimers for frequently and repeatedly posting and cancelling a given timer, which is exactly what RCU_FAST_NO_HZ does. Reported-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr> Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr>
2012-05-11 03:41:44 +04:00
/*
* Allow the CPU to enter dyntick-idle mode unless it has callbacks ready
* to invoke. If the CPU has callbacks, try to advance them. Tell the
* caller about what to set the timeout.
rcu: Precompute RCU_FAST_NO_HZ timer offsets When a CPU is entering dyntick-idle mode, tick_nohz_stop_sched_tick() calls rcu_needs_cpu() see if RCU needs that CPU, and, if not, computes the next wakeup time based on the timer wheels. Only later, when actually entering the idle loop, rcu_prepare_for_idle() will be invoked. In some cases, rcu_prepare_for_idle() will post timers to wake the CPU back up. But all for naught: The next wakeup time for the CPU has already been computed, and posting a timer afterwards does not force that wakeup time to be recomputed. This means that rcu_prepare_for_idle()'s have no effect. This is not a problem on a busy system because something else will wake up the CPU soon enough. However, on lightly loaded systems, the CPU might stay asleep for a considerable length of time. If that CPU has a callback that the rest of the system is waiting on, the system might run very slowly or (in theory) even hang. This commit avoids this problem by having rcu_needs_cpu() give tick_nohz_stop_sched_tick() an estimate of when RCU will need the CPU to wake back up, which tick_nohz_stop_sched_tick() takes into account when programming the CPU's wakeup time. An alternative approach is for rcu_prepare_for_idle() to use hrtimers instead of normal timers, but timers are much more efficient than are hrtimers for frequently and repeatedly posting and cancelling a given timer, which is exactly what RCU_FAST_NO_HZ does. Reported-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr> Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr>
2012-05-11 03:41:44 +04:00
*
* The caller must have disabled interrupts.
rcu: Precompute RCU_FAST_NO_HZ timer offsets When a CPU is entering dyntick-idle mode, tick_nohz_stop_sched_tick() calls rcu_needs_cpu() see if RCU needs that CPU, and, if not, computes the next wakeup time based on the timer wheels. Only later, when actually entering the idle loop, rcu_prepare_for_idle() will be invoked. In some cases, rcu_prepare_for_idle() will post timers to wake the CPU back up. But all for naught: The next wakeup time for the CPU has already been computed, and posting a timer afterwards does not force that wakeup time to be recomputed. This means that rcu_prepare_for_idle()'s have no effect. This is not a problem on a busy system because something else will wake up the CPU soon enough. However, on lightly loaded systems, the CPU might stay asleep for a considerable length of time. If that CPU has a callback that the rest of the system is waiting on, the system might run very slowly or (in theory) even hang. This commit avoids this problem by having rcu_needs_cpu() give tick_nohz_stop_sched_tick() an estimate of when RCU will need the CPU to wake back up, which tick_nohz_stop_sched_tick() takes into account when programming the CPU's wakeup time. An alternative approach is for rcu_prepare_for_idle() to use hrtimers instead of normal timers, but timers are much more efficient than are hrtimers for frequently and repeatedly posting and cancelling a given timer, which is exactly what RCU_FAST_NO_HZ does. Reported-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr> Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr>
2012-05-11 03:41:44 +04:00
*/
int rcu_needs_cpu(u64 basemono, u64 *nextevt)
rcu: Precompute RCU_FAST_NO_HZ timer offsets When a CPU is entering dyntick-idle mode, tick_nohz_stop_sched_tick() calls rcu_needs_cpu() see if RCU needs that CPU, and, if not, computes the next wakeup time based on the timer wheels. Only later, when actually entering the idle loop, rcu_prepare_for_idle() will be invoked. In some cases, rcu_prepare_for_idle() will post timers to wake the CPU back up. But all for naught: The next wakeup time for the CPU has already been computed, and posting a timer afterwards does not force that wakeup time to be recomputed. This means that rcu_prepare_for_idle()'s have no effect. This is not a problem on a busy system because something else will wake up the CPU soon enough. However, on lightly loaded systems, the CPU might stay asleep for a considerable length of time. If that CPU has a callback that the rest of the system is waiting on, the system might run very slowly or (in theory) even hang. This commit avoids this problem by having rcu_needs_cpu() give tick_nohz_stop_sched_tick() an estimate of when RCU will need the CPU to wake back up, which tick_nohz_stop_sched_tick() takes into account when programming the CPU's wakeup time. An alternative approach is for rcu_prepare_for_idle() to use hrtimers instead of normal timers, but timers are much more efficient than are hrtimers for frequently and repeatedly posting and cancelling a given timer, which is exactly what RCU_FAST_NO_HZ does. Reported-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr> Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr>
2012-05-11 03:41:44 +04:00
{
struct rcu_data *rdp = this_cpu_ptr(&rcu_data);
unsigned long dj;
rcu: Precompute RCU_FAST_NO_HZ timer offsets When a CPU is entering dyntick-idle mode, tick_nohz_stop_sched_tick() calls rcu_needs_cpu() see if RCU needs that CPU, and, if not, computes the next wakeup time based on the timer wheels. Only later, when actually entering the idle loop, rcu_prepare_for_idle() will be invoked. In some cases, rcu_prepare_for_idle() will post timers to wake the CPU back up. But all for naught: The next wakeup time for the CPU has already been computed, and posting a timer afterwards does not force that wakeup time to be recomputed. This means that rcu_prepare_for_idle()'s have no effect. This is not a problem on a busy system because something else will wake up the CPU soon enough. However, on lightly loaded systems, the CPU might stay asleep for a considerable length of time. If that CPU has a callback that the rest of the system is waiting on, the system might run very slowly or (in theory) even hang. This commit avoids this problem by having rcu_needs_cpu() give tick_nohz_stop_sched_tick() an estimate of when RCU will need the CPU to wake back up, which tick_nohz_stop_sched_tick() takes into account when programming the CPU's wakeup time. An alternative approach is for rcu_prepare_for_idle() to use hrtimers instead of normal timers, but timers are much more efficient than are hrtimers for frequently and repeatedly posting and cancelling a given timer, which is exactly what RCU_FAST_NO_HZ does. Reported-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr> Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr>
2012-05-11 03:41:44 +04:00
lockdep_assert_irqs_disabled();
/* If no non-offloaded callbacks, RCU doesn't need the CPU. */
if (rcu_segcblist_empty(&rdp->cblist) ||
rcu_segcblist_is_offloaded(&this_cpu_ptr(&rcu_data)->cblist)) {
*nextevt = KTIME_MAX;
rcu: Precompute RCU_FAST_NO_HZ timer offsets When a CPU is entering dyntick-idle mode, tick_nohz_stop_sched_tick() calls rcu_needs_cpu() see if RCU needs that CPU, and, if not, computes the next wakeup time based on the timer wheels. Only later, when actually entering the idle loop, rcu_prepare_for_idle() will be invoked. In some cases, rcu_prepare_for_idle() will post timers to wake the CPU back up. But all for naught: The next wakeup time for the CPU has already been computed, and posting a timer afterwards does not force that wakeup time to be recomputed. This means that rcu_prepare_for_idle()'s have no effect. This is not a problem on a busy system because something else will wake up the CPU soon enough. However, on lightly loaded systems, the CPU might stay asleep for a considerable length of time. If that CPU has a callback that the rest of the system is waiting on, the system might run very slowly or (in theory) even hang. This commit avoids this problem by having rcu_needs_cpu() give tick_nohz_stop_sched_tick() an estimate of when RCU will need the CPU to wake back up, which tick_nohz_stop_sched_tick() takes into account when programming the CPU's wakeup time. An alternative approach is for rcu_prepare_for_idle() to use hrtimers instead of normal timers, but timers are much more efficient than are hrtimers for frequently and repeatedly posting and cancelling a given timer, which is exactly what RCU_FAST_NO_HZ does. Reported-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr> Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr>
2012-05-11 03:41:44 +04:00
return 0;
}
/* Attempt to advance callbacks. */
if (rcu_try_advance_all_cbs()) {
/* Some ready to invoke, so initiate later invocation. */
invoke_rcu_core();
rcu: Precompute RCU_FAST_NO_HZ timer offsets When a CPU is entering dyntick-idle mode, tick_nohz_stop_sched_tick() calls rcu_needs_cpu() see if RCU needs that CPU, and, if not, computes the next wakeup time based on the timer wheels. Only later, when actually entering the idle loop, rcu_prepare_for_idle() will be invoked. In some cases, rcu_prepare_for_idle() will post timers to wake the CPU back up. But all for naught: The next wakeup time for the CPU has already been computed, and posting a timer afterwards does not force that wakeup time to be recomputed. This means that rcu_prepare_for_idle()'s have no effect. This is not a problem on a busy system because something else will wake up the CPU soon enough. However, on lightly loaded systems, the CPU might stay asleep for a considerable length of time. If that CPU has a callback that the rest of the system is waiting on, the system might run very slowly or (in theory) even hang. This commit avoids this problem by having rcu_needs_cpu() give tick_nohz_stop_sched_tick() an estimate of when RCU will need the CPU to wake back up, which tick_nohz_stop_sched_tick() takes into account when programming the CPU's wakeup time. An alternative approach is for rcu_prepare_for_idle() to use hrtimers instead of normal timers, but timers are much more efficient than are hrtimers for frequently and repeatedly posting and cancelling a given timer, which is exactly what RCU_FAST_NO_HZ does. Reported-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr> Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr>
2012-05-11 03:41:44 +04:00
return 1;
}
rdp->last_accelerate = jiffies;
/* Request timer and round. */
dj = round_up(rcu_idle_gp_delay + jiffies, rcu_idle_gp_delay) - jiffies;
*nextevt = basemono + dj * TICK_NSEC;
rcu: Precompute RCU_FAST_NO_HZ timer offsets When a CPU is entering dyntick-idle mode, tick_nohz_stop_sched_tick() calls rcu_needs_cpu() see if RCU needs that CPU, and, if not, computes the next wakeup time based on the timer wheels. Only later, when actually entering the idle loop, rcu_prepare_for_idle() will be invoked. In some cases, rcu_prepare_for_idle() will post timers to wake the CPU back up. But all for naught: The next wakeup time for the CPU has already been computed, and posting a timer afterwards does not force that wakeup time to be recomputed. This means that rcu_prepare_for_idle()'s have no effect. This is not a problem on a busy system because something else will wake up the CPU soon enough. However, on lightly loaded systems, the CPU might stay asleep for a considerable length of time. If that CPU has a callback that the rest of the system is waiting on, the system might run very slowly or (in theory) even hang. This commit avoids this problem by having rcu_needs_cpu() give tick_nohz_stop_sched_tick() an estimate of when RCU will need the CPU to wake back up, which tick_nohz_stop_sched_tick() takes into account when programming the CPU's wakeup time. An alternative approach is for rcu_prepare_for_idle() to use hrtimers instead of normal timers, but timers are much more efficient than are hrtimers for frequently and repeatedly posting and cancelling a given timer, which is exactly what RCU_FAST_NO_HZ does. Reported-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr> Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr>
2012-05-11 03:41:44 +04:00
return 0;
}
rcu: Make RCU_FAST_NO_HZ handle timer migration The current RCU_FAST_NO_HZ assumes that timers do not migrate unless a CPU goes offline, in which case it assumes that the CPU will have to come out of dyntick-idle mode (cancelling the timer) in order to go offline. This is important because when RCU_FAST_NO_HZ permits a CPU to enter dyntick-idle mode despite having RCU callbacks pending, it posts a timer on that CPU to force a wakeup on that CPU. This wakeup ensures that the CPU will eventually handle the end of the grace period, including invoking its RCU callbacks. However, Pascal Chapperon's test setup shows that the timer handler rcu_idle_gp_timer_func() really does get invoked in some cases. This is problematic because this can cause the CPU that entered dyntick-idle mode despite still having RCU callbacks pending to remain in dyntick-idle mode indefinitely, which means that its RCU callbacks might never be invoked. This situation can result in grace-period delays or even system hangs, which matches Pascal's observations of slow boot-up and shutdown (https://lkml.org/lkml/2012/4/5/142). See also the bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=806548 This commit therefore causes the "should never be invoked" timer handler rcu_idle_gp_timer_func() to use smp_call_function_single() to wake up the CPU for which the timer was intended, allowing that CPU to invoke its RCU callbacks in a timely manner. Reported-by: Pascal Chapperon <pascal.chapperon@wanadoo.fr> Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-05-01 01:16:19 +04:00
/*
* Prepare a CPU for idle from an RCU perspective. The first major task is to
* sense whether nohz mode has been enabled or disabled via sysfs. The second
* major task is to accelerate (that is, assign grace-period numbers to) any
* recently arrived callbacks.
*
* The caller must have disabled interrupts.
rcu: Accelerate grace period if last non-dynticked CPU Currently, rcu_needs_cpu() simply checks whether the current CPU has an outstanding RCU callback, which means that the last CPU to go into dyntick-idle mode might wait a few ticks for the relevant grace periods to complete. However, if all the other CPUs are in dyntick-idle mode, and if this CPU is in a quiescent state (which it is for RCU-bh and RCU-sched any time that we are considering going into dyntick-idle mode), then the grace period is instantly complete. This patch therefore repeatedly invokes the RCU grace-period machinery in order to force any needed grace periods to complete quickly. It does so a limited number of times in order to prevent starvation by an RCU callback function that might pass itself to call_rcu(). However, if any CPU other than the current one is not in dyntick-idle mode, fall back to simply checking (with fix to bug noted by Lai Jiangshan). Also, take advantage of last grace-period forcing, the opportunity to do so noted by Steve Rostedt. And apply simplified #ifdef condition suggested by Frederic Weisbecker. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1266887105-1528-15-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-23 04:04:59 +03:00
*/
static void rcu_prepare_for_idle(void)
rcu: Accelerate grace period if last non-dynticked CPU Currently, rcu_needs_cpu() simply checks whether the current CPU has an outstanding RCU callback, which means that the last CPU to go into dyntick-idle mode might wait a few ticks for the relevant grace periods to complete. However, if all the other CPUs are in dyntick-idle mode, and if this CPU is in a quiescent state (which it is for RCU-bh and RCU-sched any time that we are considering going into dyntick-idle mode), then the grace period is instantly complete. This patch therefore repeatedly invokes the RCU grace-period machinery in order to force any needed grace periods to complete quickly. It does so a limited number of times in order to prevent starvation by an RCU callback function that might pass itself to call_rcu(). However, if any CPU other than the current one is not in dyntick-idle mode, fall back to simply checking (with fix to bug noted by Lai Jiangshan). Also, take advantage of last grace-period forcing, the opportunity to do so noted by Steve Rostedt. And apply simplified #ifdef condition suggested by Frederic Weisbecker. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1266887105-1528-15-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-23 04:04:59 +03:00
{
rcu: Make callers awaken grace-period kthread The rcu_start_gp_advanced() function currently uses irq_work_queue() to defer wakeups of the RCU grace-period kthread. This deferring is necessary to avoid RCU-scheduler deadlocks involving the rcu_node structure's lock, meaning that RCU cannot call any of the scheduler's wake-up functions while holding one of these locks. Unfortunately, the second and subsequent calls to irq_work_queue() are ignored, and the first call will be ignored (aside from queuing the work item) if the scheduler-clock tick is turned off. This is OK for many uses, especially those where irq_work_queue() is called from an interrupt or softirq handler, because in those cases the scheduler-clock-tick state will be re-evaluated, which will turn the scheduler-clock tick back on. On the next tick, any deferred work will then be processed. However, this strategy does not always work for RCU, which can be invoked at process level from idle CPUs. In this case, the tick might never be turned back on, indefinitely defering a grace-period start request. Note that the RCU CPU stall detector cannot see this condition, because there is no RCU grace period in progress. Therefore, we can (and do!) see long tens-of-seconds stalls in grace-period handling. In theory, we could see a full grace-period hang, but rcutorture testing to date has seen only the tens-of-seconds stalls. Event tracing demonstrates that irq_work_queue() is being called repeatedly to no effect during these stalls: The "newreq" event appears repeatedly from a task that is not one of the grace-period kthreads. In theory, irq_work_queue() might be fixed to avoid this sort of issue, but RCU's requirements are unusual and it is quite straightforward to pass wake-up responsibility up through RCU's call chain, so that the wakeup happens when the offending locks are released. This commit therefore makes this change. The rcu_start_gp_advanced(), rcu_start_future_gp(), rcu_accelerate_cbs(), rcu_advance_cbs(), __note_gp_changes(), and rcu_start_gp() functions now return a boolean which indicates when a wake-up is needed. A new rcu_gp_kthread_wake() does the wakeup when it is necessary and safe to do so: No self-wakes, no wake-ups if the ->gp_flags field indicates there is no need (as in someone else did the wake-up before we got around to it), and no wake-ups before the grace-period kthread has been created. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2014-03-12 00:02:16 +04:00
bool needwake;
struct rcu_data *rdp = this_cpu_ptr(&rcu_data);
struct rcu_node *rnp;
int tne;
lockdep_assert_irqs_disabled();
if (rcu_segcblist_is_offloaded(&rdp->cblist))
return;
/* Handle nohz enablement switches conservatively. */
tne = READ_ONCE(tick_nohz_active);
if (tne != rdp->tick_nohz_enabled_snap) {
if (!rcu_segcblist_empty(&rdp->cblist))
invoke_rcu_core(); /* force nohz to see update. */
rdp->tick_nohz_enabled_snap = tne;
return;
}
if (!tne)
return;
/*
* If we have not yet accelerated this jiffy, accelerate all
* callbacks on this CPU.
*/
if (rdp->last_accelerate == jiffies)
return;
rdp->last_accelerate = jiffies;
if (rcu_segcblist_pend_cbs(&rdp->cblist)) {
rnp = rdp->mynode;
raw_spin_lock_rcu_node(rnp); /* irqs already disabled. */
needwake = rcu_accelerate_cbs(rnp, rdp);
raw_spin_unlock_rcu_node(rnp); /* irqs remain disabled. */
rcu: Make callers awaken grace-period kthread The rcu_start_gp_advanced() function currently uses irq_work_queue() to defer wakeups of the RCU grace-period kthread. This deferring is necessary to avoid RCU-scheduler deadlocks involving the rcu_node structure's lock, meaning that RCU cannot call any of the scheduler's wake-up functions while holding one of these locks. Unfortunately, the second and subsequent calls to irq_work_queue() are ignored, and the first call will be ignored (aside from queuing the work item) if the scheduler-clock tick is turned off. This is OK for many uses, especially those where irq_work_queue() is called from an interrupt or softirq handler, because in those cases the scheduler-clock-tick state will be re-evaluated, which will turn the scheduler-clock tick back on. On the next tick, any deferred work will then be processed. However, this strategy does not always work for RCU, which can be invoked at process level from idle CPUs. In this case, the tick might never be turned back on, indefinitely defering a grace-period start request. Note that the RCU CPU stall detector cannot see this condition, because there is no RCU grace period in progress. Therefore, we can (and do!) see long tens-of-seconds stalls in grace-period handling. In theory, we could see a full grace-period hang, but rcutorture testing to date has seen only the tens-of-seconds stalls. Event tracing demonstrates that irq_work_queue() is being called repeatedly to no effect during these stalls: The "newreq" event appears repeatedly from a task that is not one of the grace-period kthreads. In theory, irq_work_queue() might be fixed to avoid this sort of issue, but RCU's requirements are unusual and it is quite straightforward to pass wake-up responsibility up through RCU's call chain, so that the wakeup happens when the offending locks are released. This commit therefore makes this change. The rcu_start_gp_advanced(), rcu_start_future_gp(), rcu_accelerate_cbs(), rcu_advance_cbs(), __note_gp_changes(), and rcu_start_gp() functions now return a boolean which indicates when a wake-up is needed. A new rcu_gp_kthread_wake() does the wakeup when it is necessary and safe to do so: No self-wakes, no wake-ups if the ->gp_flags field indicates there is no need (as in someone else did the wake-up before we got around to it), and no wake-ups before the grace-period kthread has been created. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2014-03-12 00:02:16 +04:00
if (needwake)
rcu_gp_kthread_wake();
}
}
/*
* Clean up for exit from idle. Attempt to advance callbacks based on
* any grace periods that elapsed while the CPU was idle, and if any
* callbacks are now ready to invoke, initiate invocation.
*/
static void rcu_cleanup_after_idle(void)
{
struct rcu_data *rdp = this_cpu_ptr(&rcu_data);
lockdep_assert_irqs_disabled();
if (rcu_segcblist_is_offloaded(&rdp->cblist))
return;
if (rcu_try_advance_all_cbs())
invoke_rcu_core();
rcu: Accelerate grace period if last non-dynticked CPU Currently, rcu_needs_cpu() simply checks whether the current CPU has an outstanding RCU callback, which means that the last CPU to go into dyntick-idle mode might wait a few ticks for the relevant grace periods to complete. However, if all the other CPUs are in dyntick-idle mode, and if this CPU is in a quiescent state (which it is for RCU-bh and RCU-sched any time that we are considering going into dyntick-idle mode), then the grace period is instantly complete. This patch therefore repeatedly invokes the RCU grace-period machinery in order to force any needed grace periods to complete quickly. It does so a limited number of times in order to prevent starvation by an RCU callback function that might pass itself to call_rcu(). However, if any CPU other than the current one is not in dyntick-idle mode, fall back to simply checking (with fix to bug noted by Lai Jiangshan). Also, take advantage of last grace-period forcing, the opportunity to do so noted by Steve Rostedt. And apply simplified #ifdef condition suggested by Frederic Weisbecker. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1266887105-1528-15-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-23 04:04:59 +03:00
}
#endif /* #else #if !defined(CONFIG_RCU_FAST_NO_HZ) */
#ifdef CONFIG_RCU_NOCB_CPU
/*
* Offload callback processing from the boot-time-specified set of CPUs
* specified by rcu_nocb_mask. For the CPUs in the set, there are kthreads
* created that pull the callbacks from the corresponding CPU, wait for
* a grace period to elapse, and invoke the callbacks. These kthreads
* are organized into GP kthreads, which manage incoming callbacks, wait for
* grace periods, and awaken CB kthreads, and the CB kthreads, which only
* invoke callbacks. Each GP kthread invokes its own CBs. The no-CBs CPUs
* do a wake_up() on their GP kthread when they insert a callback into any
* empty list, unless the rcu_nocb_poll boot parameter has been specified,
* in which case each kthread actively polls its CPU. (Which isn't so great
* for energy efficiency, but which does reduce RCU's overhead on that CPU.)
*
* This is intended to be used in conjunction with Frederic Weisbecker's
* adaptive-idle work, which would seriously reduce OS jitter on CPUs
* running CPU-bound user-mode computations.
*
* Offloading of callbacks can also be used as an energy-efficiency
* measure because CPUs with no RCU callbacks queued are more aggressive
* about entering dyntick-idle mode.
*/
/*
* Parse the boot-time rcu_nocb_mask CPU list from the kernel parameters.
* The string after the "rcu_nocbs=" is either "all" for all CPUs, or a
* comma-separated list of CPUs and/or CPU ranges. If an invalid list is
* given, a warning is emitted and all CPUs are offloaded.
*/
static int __init rcu_nocb_setup(char *str)
{
alloc_bootmem_cpumask_var(&rcu_nocb_mask);
if (!strcasecmp(str, "all"))
cpumask_setall(rcu_nocb_mask);
else
if (cpulist_parse(str, rcu_nocb_mask)) {
pr_warn("rcu_nocbs= bad CPU range, all CPUs set\n");
cpumask_setall(rcu_nocb_mask);
}
return 1;
}
__setup("rcu_nocbs=", rcu_nocb_setup);
rcu: Make rcu_nocb_poll an early_param instead of module_param The as-documented rcu_nocb_poll will fail to enable this feature for two reasons. (1) there is an extra "s" in the documented name which is not in the code, and (2) since it uses module_param, it really is expecting a prefix, akin to "rcutree.fanout_leaf" and the prefix isn't documented. However, there are several reasons why we might not want to simply fix the typo and add the prefix: 1) we'd end up with rcutree.rcu_nocb_poll, and rather probably make a change to rcutree.nocb_poll 2) if we did #1, then the prefix wouldn't be consistent with the rcu_nocbs=<cpumap> parameter (i.e. one with, one without prefix) 3) the use of module_param in a header file is less than desired, since it isn't immediately obvious that it will get processed via rcutree.c and get the prefix from that (although use of module_param_named() could clarify that.) 4) the implied export of /sys/module/rcutree/parameters/rcu_nocb_poll data to userspace via module_param() doesn't really buy us anything, as it is read-only and we can tell if it is enabled already without it, since there is a printk at early boot telling us so. In light of all that, just change it from a module_param() to an early_setup() call, and worry about adding it to /sys later on if we decide to allow a dynamic setting of it. Also change the variable to be tagged as read_mostly, since it will only ever be fiddled with at most, once at boot. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-12-21 01:19:22 +04:00
static int __init parse_rcu_nocb_poll(char *arg)
{
rcu_nocb_poll = true;
rcu: Make rcu_nocb_poll an early_param instead of module_param The as-documented rcu_nocb_poll will fail to enable this feature for two reasons. (1) there is an extra "s" in the documented name which is not in the code, and (2) since it uses module_param, it really is expecting a prefix, akin to "rcutree.fanout_leaf" and the prefix isn't documented. However, there are several reasons why we might not want to simply fix the typo and add the prefix: 1) we'd end up with rcutree.rcu_nocb_poll, and rather probably make a change to rcutree.nocb_poll 2) if we did #1, then the prefix wouldn't be consistent with the rcu_nocbs=<cpumap> parameter (i.e. one with, one without prefix) 3) the use of module_param in a header file is less than desired, since it isn't immediately obvious that it will get processed via rcutree.c and get the prefix from that (although use of module_param_named() could clarify that.) 4) the implied export of /sys/module/rcutree/parameters/rcu_nocb_poll data to userspace via module_param() doesn't really buy us anything, as it is read-only and we can tell if it is enabled already without it, since there is a printk at early boot telling us so. In light of all that, just change it from a module_param() to an early_setup() call, and worry about adding it to /sys later on if we decide to allow a dynamic setting of it. Also change the variable to be tagged as read_mostly, since it will only ever be fiddled with at most, once at boot. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-12-21 01:19:22 +04:00
return 0;
}
early_param("rcu_nocb_poll", parse_rcu_nocb_poll);
/*
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
* Don't bother bypassing ->cblist if the call_rcu() rate is low.
* After all, the main point of bypassing is to avoid lock contention
* on ->nocb_lock, which only can happen at high call_rcu() rates.
*/
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
int nocb_nobypass_lim_per_jiffy = 16 * 1000 / HZ;
module_param(nocb_nobypass_lim_per_jiffy, int, 0);
/*
* Acquire the specified rcu_data structure's ->nocb_bypass_lock. If the
* lock isn't immediately available, increment ->nocb_lock_contended to
* flag the contention.
*/
static void rcu_nocb_bypass_lock(struct rcu_data *rdp)
__acquires(&rdp->nocb_bypass_lock)
{
lockdep_assert_irqs_disabled();
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
if (raw_spin_trylock(&rdp->nocb_bypass_lock))
return;
atomic_inc(&rdp->nocb_lock_contended);
WARN_ON_ONCE(smp_processor_id() != rdp->cpu);
smp_mb__after_atomic(); /* atomic_inc() before lock. */
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
raw_spin_lock(&rdp->nocb_bypass_lock);
smp_mb__before_atomic(); /* atomic_dec() after lock. */
atomic_dec(&rdp->nocb_lock_contended);
}
/*
* Spinwait until the specified rcu_data structure's ->nocb_lock is
* not contended. Please note that this is extremely special-purpose,
* relying on the fact that at most two kthreads and one CPU contend for
* this lock, and also that the two kthreads are guaranteed to have frequent
* grace-period-duration time intervals between successive acquisitions
* of the lock. This allows us to use an extremely simple throttling
* mechanism, and further to apply it only to the CPU doing floods of
* call_rcu() invocations. Don't try this at home!
*/
static void rcu_nocb_wait_contended(struct rcu_data *rdp)
{
WARN_ON_ONCE(smp_processor_id() != rdp->cpu);
while (WARN_ON_ONCE(atomic_read(&rdp->nocb_lock_contended)))
cpu_relax();
}
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
/*
* Conditionally acquire the specified rcu_data structure's
* ->nocb_bypass_lock.
*/
static bool rcu_nocb_bypass_trylock(struct rcu_data *rdp)
{
lockdep_assert_irqs_disabled();
return raw_spin_trylock(&rdp->nocb_bypass_lock);
}
/*
* Release the specified rcu_data structure's ->nocb_bypass_lock.
*/
static void rcu_nocb_bypass_unlock(struct rcu_data *rdp)
__releases(&rdp->nocb_bypass_lock)
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
{
lockdep_assert_irqs_disabled();
raw_spin_unlock(&rdp->nocb_bypass_lock);
}
/*
* Acquire the specified rcu_data structure's ->nocb_lock, but only
* if it corresponds to a no-CBs CPU.
*/
static void rcu_nocb_lock(struct rcu_data *rdp)
{
lockdep_assert_irqs_disabled();
if (!rcu_segcblist_is_offloaded(&rdp->cblist))
return;
raw_spin_lock(&rdp->nocb_lock);
}
/*
* Release the specified rcu_data structure's ->nocb_lock, but only
* if it corresponds to a no-CBs CPU.
*/
static void rcu_nocb_unlock(struct rcu_data *rdp)
{
if (rcu_segcblist_is_offloaded(&rdp->cblist)) {
lockdep_assert_irqs_disabled();
raw_spin_unlock(&rdp->nocb_lock);
}
}
/*
* Release the specified rcu_data structure's ->nocb_lock and restore
* interrupts, but only if it corresponds to a no-CBs CPU.
*/
static void rcu_nocb_unlock_irqrestore(struct rcu_data *rdp,
unsigned long flags)
{
if (rcu_segcblist_is_offloaded(&rdp->cblist)) {
lockdep_assert_irqs_disabled();
raw_spin_unlock_irqrestore(&rdp->nocb_lock, flags);
} else {
local_irq_restore(flags);
}
}
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
/* Lockdep check that ->cblist may be safely accessed. */
static void rcu_lockdep_assert_cblist_protected(struct rcu_data *rdp)
{
lockdep_assert_irqs_disabled();
if (rcu_segcblist_is_offloaded(&rdp->cblist))
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
lockdep_assert_held(&rdp->nocb_lock);
}
/*
* Wake up any no-CBs CPUs' kthreads that were waiting on the just-ended
* grace period.
*/
rcu: Use simple wait queues where possible in rcutree As of commit dae6e64d2bcfd ("rcu: Introduce proper blocking to no-CBs kthreads GP waits") the RCU subsystem started making use of wait queues. Here we convert all additions of RCU wait queues to use simple wait queues, since they don't need the extra overhead of the full wait queue features. Originally this was done for RT kernels[1], since we would get things like... BUG: sleeping function called from invalid context at kernel/rtmutex.c:659 in_atomic(): 1, irqs_disabled(): 1, pid: 8, name: rcu_preempt Pid: 8, comm: rcu_preempt Not tainted Call Trace: [<ffffffff8106c8d0>] __might_sleep+0xd0/0xf0 [<ffffffff817d77b4>] rt_spin_lock+0x24/0x50 [<ffffffff8106fcf6>] __wake_up+0x36/0x70 [<ffffffff810c4542>] rcu_gp_kthread+0x4d2/0x680 [<ffffffff8105f910>] ? __init_waitqueue_head+0x50/0x50 [<ffffffff810c4070>] ? rcu_gp_fqs+0x80/0x80 [<ffffffff8105eabb>] kthread+0xdb/0xe0 [<ffffffff8106b912>] ? finish_task_switch+0x52/0x100 [<ffffffff817e0754>] kernel_thread_helper+0x4/0x10 [<ffffffff8105e9e0>] ? __init_kthread_worker+0x60/0x60 [<ffffffff817e0750>] ? gs_change+0xb/0xb ...and hence simple wait queues were deployed on RT out of necessity (as simple wait uses a raw lock), but mainline might as well take advantage of the more streamline support as well. [1] This is a carry forward of work from v3.10-rt; the original conversion was by Thomas on an earlier -rt version, and Sebastian extended it to additional post-3.10 added RCU waiters; here I've added a commit log and unified the RCU changes into one, and uprev'd it to match mainline RCU. Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux-rt-users@vger.kernel.org Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1455871601-27484-6-git-send-email-wagi@monom.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-19 11:46:41 +03:00
static void rcu_nocb_gp_cleanup(struct swait_queue_head *sq)
{
rcu: Use simple wait queues where possible in rcutree As of commit dae6e64d2bcfd ("rcu: Introduce proper blocking to no-CBs kthreads GP waits") the RCU subsystem started making use of wait queues. Here we convert all additions of RCU wait queues to use simple wait queues, since they don't need the extra overhead of the full wait queue features. Originally this was done for RT kernels[1], since we would get things like... BUG: sleeping function called from invalid context at kernel/rtmutex.c:659 in_atomic(): 1, irqs_disabled(): 1, pid: 8, name: rcu_preempt Pid: 8, comm: rcu_preempt Not tainted Call Trace: [<ffffffff8106c8d0>] __might_sleep+0xd0/0xf0 [<ffffffff817d77b4>] rt_spin_lock+0x24/0x50 [<ffffffff8106fcf6>] __wake_up+0x36/0x70 [<ffffffff810c4542>] rcu_gp_kthread+0x4d2/0x680 [<ffffffff8105f910>] ? __init_waitqueue_head+0x50/0x50 [<ffffffff810c4070>] ? rcu_gp_fqs+0x80/0x80 [<ffffffff8105eabb>] kthread+0xdb/0xe0 [<ffffffff8106b912>] ? finish_task_switch+0x52/0x100 [<ffffffff817e0754>] kernel_thread_helper+0x4/0x10 [<ffffffff8105e9e0>] ? __init_kthread_worker+0x60/0x60 [<ffffffff817e0750>] ? gs_change+0xb/0xb ...and hence simple wait queues were deployed on RT out of necessity (as simple wait uses a raw lock), but mainline might as well take advantage of the more streamline support as well. [1] This is a carry forward of work from v3.10-rt; the original conversion was by Thomas on an earlier -rt version, and Sebastian extended it to additional post-3.10 added RCU waiters; here I've added a commit log and unified the RCU changes into one, and uprev'd it to match mainline RCU. Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux-rt-users@vger.kernel.org Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1455871601-27484-6-git-send-email-wagi@monom.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-19 11:46:41 +03:00
swake_up_all(sq);
}
rcu: Use simple wait queues where possible in rcutree As of commit dae6e64d2bcfd ("rcu: Introduce proper blocking to no-CBs kthreads GP waits") the RCU subsystem started making use of wait queues. Here we convert all additions of RCU wait queues to use simple wait queues, since they don't need the extra overhead of the full wait queue features. Originally this was done for RT kernels[1], since we would get things like... BUG: sleeping function called from invalid context at kernel/rtmutex.c:659 in_atomic(): 1, irqs_disabled(): 1, pid: 8, name: rcu_preempt Pid: 8, comm: rcu_preempt Not tainted Call Trace: [<ffffffff8106c8d0>] __might_sleep+0xd0/0xf0 [<ffffffff817d77b4>] rt_spin_lock+0x24/0x50 [<ffffffff8106fcf6>] __wake_up+0x36/0x70 [<ffffffff810c4542>] rcu_gp_kthread+0x4d2/0x680 [<ffffffff8105f910>] ? __init_waitqueue_head+0x50/0x50 [<ffffffff810c4070>] ? rcu_gp_fqs+0x80/0x80 [<ffffffff8105eabb>] kthread+0xdb/0xe0 [<ffffffff8106b912>] ? finish_task_switch+0x52/0x100 [<ffffffff817e0754>] kernel_thread_helper+0x4/0x10 [<ffffffff8105e9e0>] ? __init_kthread_worker+0x60/0x60 [<ffffffff817e0750>] ? gs_change+0xb/0xb ...and hence simple wait queues were deployed on RT out of necessity (as simple wait uses a raw lock), but mainline might as well take advantage of the more streamline support as well. [1] This is a carry forward of work from v3.10-rt; the original conversion was by Thomas on an earlier -rt version, and Sebastian extended it to additional post-3.10 added RCU waiters; here I've added a commit log and unified the RCU changes into one, and uprev'd it to match mainline RCU. Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux-rt-users@vger.kernel.org Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1455871601-27484-6-git-send-email-wagi@monom.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-19 11:46:41 +03:00
static struct swait_queue_head *rcu_nocb_gp_get(struct rcu_node *rnp)
rcu: Do not call rcu_nocb_gp_cleanup() while holding rnp->lock rcu_nocb_gp_cleanup() is called while holding rnp->lock. Currently, this is okay because the wake_up_all() in rcu_nocb_gp_cleanup() will not enable the IRQs. lockdep is happy. By switching over using swait this is not true anymore. swake_up_all() enables the IRQs while processing the waiters. __do_softirq() can now run and will eventually call rcu_process_callbacks() which wants to grap nrp->lock. Let's move the rcu_nocb_gp_cleanup() call outside the lock before we switch over to swait. If we would hold the rnp->lock and use swait, lockdep reports following: ================================= [ INFO: inconsistent lock state ] 4.2.0-rc5-00025-g9a73ba0 #136 Not tainted --------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. rcu_preempt/8 [HC0[0]:SC0[0]:HE1:SE1] takes: (rcu_node_1){+.?...}, at: [<ffffffff811387c7>] rcu_gp_kthread+0xb97/0xeb0 {IN-SOFTIRQ-W} state was registered at: [<ffffffff81109b9f>] __lock_acquire+0xd5f/0x21e0 [<ffffffff8110be0f>] lock_acquire+0xdf/0x2b0 [<ffffffff81841cc9>] _raw_spin_lock_irqsave+0x59/0xa0 [<ffffffff81136991>] rcu_process_callbacks+0x141/0x3c0 [<ffffffff810b1a9d>] __do_softirq+0x14d/0x670 [<ffffffff810b2214>] irq_exit+0x104/0x110 [<ffffffff81844e96>] smp_apic_timer_interrupt+0x46/0x60 [<ffffffff81842e70>] apic_timer_interrupt+0x70/0x80 [<ffffffff810dba66>] rq_attach_root+0xa6/0x100 [<ffffffff810dbc2d>] cpu_attach_domain+0x16d/0x650 [<ffffffff810e4b42>] build_sched_domains+0x942/0xb00 [<ffffffff821777c2>] sched_init_smp+0x509/0x5c1 [<ffffffff821551e3>] kernel_init_freeable+0x172/0x28f [<ffffffff8182cdce>] kernel_init+0xe/0xe0 [<ffffffff8184231f>] ret_from_fork+0x3f/0x70 irq event stamp: 76 hardirqs last enabled at (75): [<ffffffff81841330>] _raw_spin_unlock_irq+0x30/0x60 hardirqs last disabled at (76): [<ffffffff8184116f>] _raw_spin_lock_irq+0x1f/0x90 softirqs last enabled at (0): [<ffffffff810a8df2>] copy_process.part.26+0x602/0x1cf0 softirqs last disabled at (0): [< (null)>] (null) other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(rcu_node_1); <Interrupt> lock(rcu_node_1); *** DEADLOCK *** 1 lock held by rcu_preempt/8: #0: (rcu_node_1){+.?...}, at: [<ffffffff811387c7>] rcu_gp_kthread+0xb97/0xeb0 stack backtrace: CPU: 0 PID: 8 Comm: rcu_preempt Not tainted 4.2.0-rc5-00025-g9a73ba0 #136 Hardware name: Dell Inc. PowerEdge R820/066N7P, BIOS 2.0.20 01/16/2014 0000000000000000 000000006d7e67d8 ffff881fb081fbd8 ffffffff818379e0 0000000000000000 ffff881fb0812a00 ffff881fb081fc38 ffffffff8110813b 0000000000000000 0000000000000001 ffff881f00000001 ffffffff8102fa4f Call Trace: [<ffffffff818379e0>] dump_stack+0x4f/0x7b [<ffffffff8110813b>] print_usage_bug+0x1db/0x1e0 [<ffffffff8102fa4f>] ? save_stack_trace+0x2f/0x50 [<ffffffff811087ad>] mark_lock+0x66d/0x6e0 [<ffffffff81107790>] ? check_usage_forwards+0x150/0x150 [<ffffffff81108898>] mark_held_locks+0x78/0xa0 [<ffffffff81841330>] ? _raw_spin_unlock_irq+0x30/0x60 [<ffffffff81108a28>] trace_hardirqs_on_caller+0x168/0x220 [<ffffffff81108aed>] trace_hardirqs_on+0xd/0x10 [<ffffffff81841330>] _raw_spin_unlock_irq+0x30/0x60 [<ffffffff810fd1c7>] swake_up_all+0xb7/0xe0 [<ffffffff811386e1>] rcu_gp_kthread+0xab1/0xeb0 [<ffffffff811089bf>] ? trace_hardirqs_on_caller+0xff/0x220 [<ffffffff81841341>] ? _raw_spin_unlock_irq+0x41/0x60 [<ffffffff81137c30>] ? rcu_barrier+0x20/0x20 [<ffffffff810d2014>] kthread+0x104/0x120 [<ffffffff81841330>] ? _raw_spin_unlock_irq+0x30/0x60 [<ffffffff810d1f10>] ? kthread_create_on_node+0x260/0x260 [<ffffffff8184231f>] ret_from_fork+0x3f/0x70 [<ffffffff810d1f10>] ? kthread_create_on_node+0x260/0x260 Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux-rt-users@vger.kernel.org Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1455871601-27484-5-git-send-email-wagi@monom.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-19 11:46:40 +03:00
{
return &rnp->nocb_gp_wq[rcu_seq_ctr(rnp->gp_seq) & 0x1];
rcu: Do not call rcu_nocb_gp_cleanup() while holding rnp->lock rcu_nocb_gp_cleanup() is called while holding rnp->lock. Currently, this is okay because the wake_up_all() in rcu_nocb_gp_cleanup() will not enable the IRQs. lockdep is happy. By switching over using swait this is not true anymore. swake_up_all() enables the IRQs while processing the waiters. __do_softirq() can now run and will eventually call rcu_process_callbacks() which wants to grap nrp->lock. Let's move the rcu_nocb_gp_cleanup() call outside the lock before we switch over to swait. If we would hold the rnp->lock and use swait, lockdep reports following: ================================= [ INFO: inconsistent lock state ] 4.2.0-rc5-00025-g9a73ba0 #136 Not tainted --------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. rcu_preempt/8 [HC0[0]:SC0[0]:HE1:SE1] takes: (rcu_node_1){+.?...}, at: [<ffffffff811387c7>] rcu_gp_kthread+0xb97/0xeb0 {IN-SOFTIRQ-W} state was registered at: [<ffffffff81109b9f>] __lock_acquire+0xd5f/0x21e0 [<ffffffff8110be0f>] lock_acquire+0xdf/0x2b0 [<ffffffff81841cc9>] _raw_spin_lock_irqsave+0x59/0xa0 [<ffffffff81136991>] rcu_process_callbacks+0x141/0x3c0 [<ffffffff810b1a9d>] __do_softirq+0x14d/0x670 [<ffffffff810b2214>] irq_exit+0x104/0x110 [<ffffffff81844e96>] smp_apic_timer_interrupt+0x46/0x60 [<ffffffff81842e70>] apic_timer_interrupt+0x70/0x80 [<ffffffff810dba66>] rq_attach_root+0xa6/0x100 [<ffffffff810dbc2d>] cpu_attach_domain+0x16d/0x650 [<ffffffff810e4b42>] build_sched_domains+0x942/0xb00 [<ffffffff821777c2>] sched_init_smp+0x509/0x5c1 [<ffffffff821551e3>] kernel_init_freeable+0x172/0x28f [<ffffffff8182cdce>] kernel_init+0xe/0xe0 [<ffffffff8184231f>] ret_from_fork+0x3f/0x70 irq event stamp: 76 hardirqs last enabled at (75): [<ffffffff81841330>] _raw_spin_unlock_irq+0x30/0x60 hardirqs last disabled at (76): [<ffffffff8184116f>] _raw_spin_lock_irq+0x1f/0x90 softirqs last enabled at (0): [<ffffffff810a8df2>] copy_process.part.26+0x602/0x1cf0 softirqs last disabled at (0): [< (null)>] (null) other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(rcu_node_1); <Interrupt> lock(rcu_node_1); *** DEADLOCK *** 1 lock held by rcu_preempt/8: #0: (rcu_node_1){+.?...}, at: [<ffffffff811387c7>] rcu_gp_kthread+0xb97/0xeb0 stack backtrace: CPU: 0 PID: 8 Comm: rcu_preempt Not tainted 4.2.0-rc5-00025-g9a73ba0 #136 Hardware name: Dell Inc. PowerEdge R820/066N7P, BIOS 2.0.20 01/16/2014 0000000000000000 000000006d7e67d8 ffff881fb081fbd8 ffffffff818379e0 0000000000000000 ffff881fb0812a00 ffff881fb081fc38 ffffffff8110813b 0000000000000000 0000000000000001 ffff881f00000001 ffffffff8102fa4f Call Trace: [<ffffffff818379e0>] dump_stack+0x4f/0x7b [<ffffffff8110813b>] print_usage_bug+0x1db/0x1e0 [<ffffffff8102fa4f>] ? save_stack_trace+0x2f/0x50 [<ffffffff811087ad>] mark_lock+0x66d/0x6e0 [<ffffffff81107790>] ? check_usage_forwards+0x150/0x150 [<ffffffff81108898>] mark_held_locks+0x78/0xa0 [<ffffffff81841330>] ? _raw_spin_unlock_irq+0x30/0x60 [<ffffffff81108a28>] trace_hardirqs_on_caller+0x168/0x220 [<ffffffff81108aed>] trace_hardirqs_on+0xd/0x10 [<ffffffff81841330>] _raw_spin_unlock_irq+0x30/0x60 [<ffffffff810fd1c7>] swake_up_all+0xb7/0xe0 [<ffffffff811386e1>] rcu_gp_kthread+0xab1/0xeb0 [<ffffffff811089bf>] ? trace_hardirqs_on_caller+0xff/0x220 [<ffffffff81841341>] ? _raw_spin_unlock_irq+0x41/0x60 [<ffffffff81137c30>] ? rcu_barrier+0x20/0x20 [<ffffffff810d2014>] kthread+0x104/0x120 [<ffffffff81841330>] ? _raw_spin_unlock_irq+0x30/0x60 [<ffffffff810d1f10>] ? kthread_create_on_node+0x260/0x260 [<ffffffff8184231f>] ret_from_fork+0x3f/0x70 [<ffffffff810d1f10>] ? kthread_create_on_node+0x260/0x260 Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux-rt-users@vger.kernel.org Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1455871601-27484-5-git-send-email-wagi@monom.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-19 11:46:40 +03:00
}
static void rcu_init_one_nocb(struct rcu_node *rnp)
{
rcu: Use simple wait queues where possible in rcutree As of commit dae6e64d2bcfd ("rcu: Introduce proper blocking to no-CBs kthreads GP waits") the RCU subsystem started making use of wait queues. Here we convert all additions of RCU wait queues to use simple wait queues, since they don't need the extra overhead of the full wait queue features. Originally this was done for RT kernels[1], since we would get things like... BUG: sleeping function called from invalid context at kernel/rtmutex.c:659 in_atomic(): 1, irqs_disabled(): 1, pid: 8, name: rcu_preempt Pid: 8, comm: rcu_preempt Not tainted Call Trace: [<ffffffff8106c8d0>] __might_sleep+0xd0/0xf0 [<ffffffff817d77b4>] rt_spin_lock+0x24/0x50 [<ffffffff8106fcf6>] __wake_up+0x36/0x70 [<ffffffff810c4542>] rcu_gp_kthread+0x4d2/0x680 [<ffffffff8105f910>] ? __init_waitqueue_head+0x50/0x50 [<ffffffff810c4070>] ? rcu_gp_fqs+0x80/0x80 [<ffffffff8105eabb>] kthread+0xdb/0xe0 [<ffffffff8106b912>] ? finish_task_switch+0x52/0x100 [<ffffffff817e0754>] kernel_thread_helper+0x4/0x10 [<ffffffff8105e9e0>] ? __init_kthread_worker+0x60/0x60 [<ffffffff817e0750>] ? gs_change+0xb/0xb ...and hence simple wait queues were deployed on RT out of necessity (as simple wait uses a raw lock), but mainline might as well take advantage of the more streamline support as well. [1] This is a carry forward of work from v3.10-rt; the original conversion was by Thomas on an earlier -rt version, and Sebastian extended it to additional post-3.10 added RCU waiters; here I've added a commit log and unified the RCU changes into one, and uprev'd it to match mainline RCU. Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux-rt-users@vger.kernel.org Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1455871601-27484-6-git-send-email-wagi@monom.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-19 11:46:41 +03:00
init_swait_queue_head(&rnp->nocb_gp_wq[0]);
init_swait_queue_head(&rnp->nocb_gp_wq[1]);
}
/* Is the specified CPU a no-CBs CPU? */
bool rcu_is_nocb_cpu(int cpu)
{
if (cpumask_available(rcu_nocb_mask))
return cpumask_test_cpu(cpu, rcu_nocb_mask);
return false;
}
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
/*
* Kick the GP kthread for this NOCB group. Caller holds ->nocb_lock
* and this function releases it.
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
*/
static void wake_nocb_gp(struct rcu_data *rdp, bool force,
unsigned long flags)
__releases(rdp->nocb_lock)
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
{
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
bool needwake = false;
struct rcu_data *rdp_gp = rdp->nocb_gp_rdp;
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
lockdep_assert_held(&rdp->nocb_lock);
if (!READ_ONCE(rdp_gp->nocb_gp_kthread)) {
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
trace_rcu_nocb_wake(rcu_state.name, rdp->cpu,
TPS("AlreadyAwake"));
rcu_nocb_unlock_irqrestore(rdp, flags);
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
return;
}
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
del_timer(&rdp->nocb_timer);
rcu_nocb_unlock_irqrestore(rdp, flags);
raw_spin_lock_irqsave(&rdp_gp->nocb_gp_lock, flags);
if (force || READ_ONCE(rdp_gp->nocb_gp_sleep)) {
WRITE_ONCE(rdp_gp->nocb_gp_sleep, false);
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
needwake = true;
trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, TPS("DoWake"));
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
}
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
raw_spin_unlock_irqrestore(&rdp_gp->nocb_gp_lock, flags);
if (needwake)
wake_up_process(rdp_gp->nocb_gp_kthread);
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
}
/*
* Arrange to wake the GP kthread for this NOCB group at some future
* time when it is safe to do so.
*/
static void wake_nocb_gp_defer(struct rcu_data *rdp, int waketype,
const char *reason)
{
if (rdp->nocb_defer_wakeup == RCU_NOCB_WAKE_NOT)
mod_timer(&rdp->nocb_timer, jiffies + 1);
if (rdp->nocb_defer_wakeup < waketype)
WRITE_ONCE(rdp->nocb_defer_wakeup, waketype);
trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, reason);
rcu: Make rcu_barrier() understand about missing rcuo kthreads Commit 35ce7f29a44a (rcu: Create rcuo kthreads only for onlined CPUs) avoids creating rcuo kthreads for CPUs that never come online. This fixes a bug in many instances of firmware: Instead of lying about their age, these systems instead lie about the number of CPUs that they have. Before commit 35ce7f29a44a, this could result in huge numbers of useless rcuo kthreads being created. It appears that experience indicates that I should have told the people suffering from this problem to fix their broken firmware, but I instead produced what turned out to be a partial fix. The missing piece supplied by this commit makes sure that rcu_barrier() knows not to post callbacks for no-CBs CPUs that have not yet come online, because otherwise rcu_barrier() will hang on systems having firmware that lies about the number of CPUs. It is tempting to simply have rcu_barrier() refuse to post a callback on any no-CBs CPU that does not have an rcuo kthread. This unfortunately does not work because rcu_barrier() is required to wait for all pending callbacks. It is therefore required to wait even for those callbacks that cannot possibly be invoked. Even if doing so hangs the system. Given that posting a callback to a no-CBs CPU that does not yet have an rcuo kthread can hang rcu_barrier(), It is tempting to report an error in this case. Unfortunately, this will result in false positives at boot time, when it is perfectly legal to post callbacks to the boot CPU before the scheduler has started, in other words, before it is legal to invoke rcu_barrier(). So this commit instead has rcu_barrier() avoid posting callbacks to CPUs having neither rcuo kthread nor pending callbacks, and has it complain bitterly if it finds CPUs having no rcuo kthread but some pending callbacks. And when rcu_barrier() does find CPUs having no rcuo kthread but pending callbacks, as noted earlier, it has no choice but to hang indefinitely. Reported-by: Yanko Kaneti <yaneti@declera.com> Reported-by: Jay Vosburgh <jay.vosburgh@canonical.com> Reported-by: Meelis Roos <mroos@linux.ee> Reported-by: Eric B Munson <emunson@akamai.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Eric B Munson <emunson@akamai.com> Tested-by: Jay Vosburgh <jay.vosburgh@canonical.com> Tested-by: Yanko Kaneti <yaneti@declera.com> Tested-by: Kevin Fenzi <kevin@scrye.com> Tested-by: Meelis Roos <mroos@linux.ee>
2014-10-27 19:15:54 +03:00
}
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
/*
* Flush the ->nocb_bypass queue into ->cblist, enqueuing rhp if non-NULL.
* However, if there is a callback to be enqueued and if ->nocb_bypass
* proves to be initially empty, just return false because the no-CB GP
* kthread may need to be awakened in this case.
*
* Note that this function always returns true if rhp is NULL.
*/
static bool rcu_nocb_do_flush_bypass(struct rcu_data *rdp, struct rcu_head *rhp,
unsigned long j)
{
struct rcu_cblist rcl;
WARN_ON_ONCE(!rcu_segcblist_is_offloaded(&rdp->cblist));
rcu_lockdep_assert_cblist_protected(rdp);
lockdep_assert_held(&rdp->nocb_bypass_lock);
if (rhp && !rcu_cblist_n_cbs(&rdp->nocb_bypass)) {
raw_spin_unlock(&rdp->nocb_bypass_lock);
return false;
}
/* Note: ->cblist.len already accounts for ->nocb_bypass contents. */
if (rhp)
rcu_segcblist_inc_len(&rdp->cblist); /* Must precede enqueue. */
rcu_cblist_flush_enqueue(&rcl, &rdp->nocb_bypass, rhp);
rcu_segcblist_insert_pend_cbs(&rdp->cblist, &rcl);
WRITE_ONCE(rdp->nocb_bypass_first, j);
rcu_nocb_bypass_unlock(rdp);
return true;
}
/*
* Flush the ->nocb_bypass queue into ->cblist, enqueuing rhp if non-NULL.
* However, if there is a callback to be enqueued and if ->nocb_bypass
* proves to be initially empty, just return false because the no-CB GP
* kthread may need to be awakened in this case.
*
* Note that this function always returns true if rhp is NULL.
*/
static bool rcu_nocb_flush_bypass(struct rcu_data *rdp, struct rcu_head *rhp,
unsigned long j)
{
if (!rcu_segcblist_is_offloaded(&rdp->cblist))
return true;
rcu_lockdep_assert_cblist_protected(rdp);
rcu_nocb_bypass_lock(rdp);
return rcu_nocb_do_flush_bypass(rdp, rhp, j);
}
/*
* If the ->nocb_bypass_lock is immediately available, flush the
* ->nocb_bypass queue into ->cblist.
*/
static void rcu_nocb_try_flush_bypass(struct rcu_data *rdp, unsigned long j)
{
rcu_lockdep_assert_cblist_protected(rdp);
if (!rcu_segcblist_is_offloaded(&rdp->cblist) ||
!rcu_nocb_bypass_trylock(rdp))
return;
WARN_ON_ONCE(!rcu_nocb_do_flush_bypass(rdp, NULL, j));
}
/*
* See whether it is appropriate to use the ->nocb_bypass list in order
* to control contention on ->nocb_lock. A limited number of direct
* enqueues are permitted into ->cblist per jiffy. If ->nocb_bypass
* is non-empty, further callbacks must be placed into ->nocb_bypass,
* otherwise rcu_barrier() breaks. Use rcu_nocb_flush_bypass() to switch
* back to direct use of ->cblist. However, ->nocb_bypass should not be
* used if ->cblist is empty, because otherwise callbacks can be stranded
* on ->nocb_bypass because we cannot count on the current CPU ever again
* invoking call_rcu(). The general rule is that if ->nocb_bypass is
* non-empty, the corresponding no-CBs grace-period kthread must not be
* in an indefinite sleep state.
*
* Finally, it is not permitted to use the bypass during early boot,
* as doing so would confuse the auto-initialization code. Besides
* which, there is no point in worrying about lock contention while
* there is only one CPU in operation.
*/
static bool rcu_nocb_try_bypass(struct rcu_data *rdp, struct rcu_head *rhp,
bool *was_alldone, unsigned long flags)
{
unsigned long c;
unsigned long cur_gp_seq;
unsigned long j = jiffies;
long ncbs = rcu_cblist_n_cbs(&rdp->nocb_bypass);
if (!rcu_segcblist_is_offloaded(&rdp->cblist)) {
*was_alldone = !rcu_segcblist_pend_cbs(&rdp->cblist);
return false; /* Not offloaded, no bypassing. */
}
lockdep_assert_irqs_disabled();
// Don't use ->nocb_bypass during early boot.
if (rcu_scheduler_active != RCU_SCHEDULER_RUNNING) {
rcu_nocb_lock(rdp);
WARN_ON_ONCE(rcu_cblist_n_cbs(&rdp->nocb_bypass));
*was_alldone = !rcu_segcblist_pend_cbs(&rdp->cblist);
return false;
}
// If we have advanced to a new jiffy, reset counts to allow
// moving back from ->nocb_bypass to ->cblist.
if (j == rdp->nocb_nobypass_last) {
c = rdp->nocb_nobypass_count + 1;
} else {
WRITE_ONCE(rdp->nocb_nobypass_last, j);
c = rdp->nocb_nobypass_count - nocb_nobypass_lim_per_jiffy;
if (ULONG_CMP_LT(rdp->nocb_nobypass_count,
nocb_nobypass_lim_per_jiffy))
c = 0;
else if (c > nocb_nobypass_lim_per_jiffy)
c = nocb_nobypass_lim_per_jiffy;
}
WRITE_ONCE(rdp->nocb_nobypass_count, c);
// If there hasn't yet been all that many ->cblist enqueues
// this jiffy, tell the caller to enqueue onto ->cblist. But flush
// ->nocb_bypass first.
if (rdp->nocb_nobypass_count < nocb_nobypass_lim_per_jiffy) {
rcu_nocb_lock(rdp);
*was_alldone = !rcu_segcblist_pend_cbs(&rdp->cblist);
if (*was_alldone)
trace_rcu_nocb_wake(rcu_state.name, rdp->cpu,
TPS("FirstQ"));
WARN_ON_ONCE(!rcu_nocb_flush_bypass(rdp, NULL, j));
WARN_ON_ONCE(rcu_cblist_n_cbs(&rdp->nocb_bypass));
return false; // Caller must enqueue the callback.
}
// If ->nocb_bypass has been used too long or is too full,
// flush ->nocb_bypass to ->cblist.
if ((ncbs && j != READ_ONCE(rdp->nocb_bypass_first)) ||
ncbs >= qhimark) {
rcu_nocb_lock(rdp);
if (!rcu_nocb_flush_bypass(rdp, rhp, j)) {
*was_alldone = !rcu_segcblist_pend_cbs(&rdp->cblist);
if (*was_alldone)
trace_rcu_nocb_wake(rcu_state.name, rdp->cpu,
TPS("FirstQ"));
WARN_ON_ONCE(rcu_cblist_n_cbs(&rdp->nocb_bypass));
return false; // Caller must enqueue the callback.
}
if (j != rdp->nocb_gp_adv_time &&
rcu_segcblist_nextgp(&rdp->cblist, &cur_gp_seq) &&
rcu_seq_done(&rdp->mynode->gp_seq, cur_gp_seq)) {
rcu_advance_cbs_nowake(rdp->mynode, rdp);
rdp->nocb_gp_adv_time = j;
}
rcu_nocb_unlock_irqrestore(rdp, flags);
return true; // Callback already enqueued.
}
// We need to use the bypass.
rcu_nocb_wait_contended(rdp);
rcu_nocb_bypass_lock(rdp);
ncbs = rcu_cblist_n_cbs(&rdp->nocb_bypass);
rcu_segcblist_inc_len(&rdp->cblist); /* Must precede enqueue. */
rcu_cblist_enqueue(&rdp->nocb_bypass, rhp);
if (!ncbs) {
WRITE_ONCE(rdp->nocb_bypass_first, j);
trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, TPS("FirstBQ"));
}
rcu_nocb_bypass_unlock(rdp);
smp_mb(); /* Order enqueue before wake. */
if (ncbs) {
local_irq_restore(flags);
} else {
// No-CBs GP kthread might be indefinitely asleep, if so, wake.
rcu_nocb_lock(rdp); // Rare during call_rcu() flood.
if (!rcu_segcblist_pend_cbs(&rdp->cblist)) {
trace_rcu_nocb_wake(rcu_state.name, rdp->cpu,
TPS("FirstBQwake"));
__call_rcu_nocb_wake(rdp, true, flags);
} else {
trace_rcu_nocb_wake(rcu_state.name, rdp->cpu,
TPS("FirstBQnoWake"));
rcu_nocb_unlock_irqrestore(rdp, flags);
}
}
return true; // Callback already enqueued.
}
/*
* Awaken the no-CBs grace-period kthead if needed, either due to it
* legitimately being asleep or due to overload conditions.
*
* If warranted, also wake up the kthread servicing this CPUs queues.
*/
static void __call_rcu_nocb_wake(struct rcu_data *rdp, bool was_alldone,
unsigned long flags)
__releases(rdp->nocb_lock)
{
unsigned long cur_gp_seq;
unsigned long j;
long len;
struct task_struct *t;
// If we are being polled or there is no kthread, just leave.
rcu/nocb: Provide separate no-CBs grace-period kthreads Currently, there is one no-CBs rcuo kthread per CPU, and these kthreads are divided into groups. The first rcuo kthread to come online in a given group is that group's leader, and the leader both waits for grace periods and invokes its CPU's callbacks. The non-leader rcuo kthreads only invoke callbacks. This works well in the real-time/embedded environments for which it was intended because such environments tend not to generate all that many callbacks. However, given huge floods of callbacks, it is possible for the leader kthread to be stuck invoking callbacks while its followers wait helplessly while their callbacks pile up. This is a good recipe for an OOM, and rcutorture's new callback-flood capability does generate such OOMs. One strategy would be to wait until such OOMs start happening in production, but similar OOMs have in fact happened starting in 2018. It would therefore be wise to take a more proactive approach. This commit therefore features per-CPU rcuo kthreads that do nothing but invoke callbacks. Instead of having one of these kthreads act as leader, each group has a separate rcog kthread that handles grace periods for its group. Because these rcuog kthreads do not invoke callbacks, callback floods on one CPU no longer block callbacks from reaching the rcuc callback-invocation kthreads on other CPUs. This change does introduce additional kthreads, however: 1. The number of additional kthreads is about the square root of the number of CPUs, so that a 4096-CPU system would have only about 64 additional kthreads. Note that recent changes decreased the number of rcuo kthreads by a factor of two (CONFIG_PREEMPT=n) or even three (CONFIG_PREEMPT=y), so this still represents a significant improvement on most systems. 2. The leading "rcuo" of the rcuog kthreads should allow existing scripting to affinity these additional kthreads as needed, the same as for the rcuop and rcuos kthreads. (There are no longer any rcuob kthreads.) 3. A state-machine approach was considered and rejected. Although this would allow the rcuo kthreads to continue their dual leader/follower roles, it complicates callback invocation and makes it more difficult to consolidate rcuo callback invocation with existing softirq callback invocation. The introduction of rcuog kthreads should thus be acceptable. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-03-30 02:43:51 +03:00
t = READ_ONCE(rdp->nocb_gp_kthread);
if (rcu_nocb_poll || !t) {
trace_rcu_nocb_wake(rcu_state.name, rdp->cpu,
TPS("WakeNotPoll"));
rcu_nocb_unlock_irqrestore(rdp, flags);
return;
}
// Need to actually to a wakeup.
len = rcu_segcblist_n_cbs(&rdp->cblist);
if (was_alldone) {
rdp->qlen_last_fqs_check = len;
rcu: Break call_rcu() deadlock involving scheduler and perf Dave Jones got the following lockdep splat: > ====================================================== > [ INFO: possible circular locking dependency detected ] > 3.12.0-rc3+ #92 Not tainted > ------------------------------------------------------- > trinity-child2/15191 is trying to acquire lock: > (&rdp->nocb_wq){......}, at: [<ffffffff8108ff43>] __wake_up+0x23/0x50 > > but task is already holding lock: > (&ctx->lock){-.-...}, at: [<ffffffff81154c19>] perf_event_exit_task+0x109/0x230 > > which lock already depends on the new lock. > > > the existing dependency chain (in reverse order) is: > > -> #3 (&ctx->lock){-.-...}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff81733f90>] _raw_spin_lock+0x40/0x80 > [<ffffffff811500ff>] __perf_event_task_sched_out+0x2df/0x5e0 > [<ffffffff81091b83>] perf_event_task_sched_out+0x93/0xa0 > [<ffffffff81732052>] __schedule+0x1d2/0xa20 > [<ffffffff81732f30>] preempt_schedule_irq+0x50/0xb0 > [<ffffffff817352b6>] retint_kernel+0x26/0x30 > [<ffffffff813eed04>] tty_flip_buffer_push+0x34/0x50 > [<ffffffff813f0504>] pty_write+0x54/0x60 > [<ffffffff813e900d>] n_tty_write+0x32d/0x4e0 > [<ffffffff813e5838>] tty_write+0x158/0x2d0 > [<ffffffff811c4850>] vfs_write+0xc0/0x1f0 > [<ffffffff811c52cc>] SyS_write+0x4c/0xa0 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 > > -> #2 (&rq->lock){-.-.-.}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff81733f90>] _raw_spin_lock+0x40/0x80 > [<ffffffff810980b2>] wake_up_new_task+0xc2/0x2e0 > [<ffffffff81054336>] do_fork+0x126/0x460 > [<ffffffff81054696>] kernel_thread+0x26/0x30 > [<ffffffff8171ff93>] rest_init+0x23/0x140 > [<ffffffff81ee1e4b>] start_kernel+0x3f6/0x403 > [<ffffffff81ee1571>] x86_64_start_reservations+0x2a/0x2c > [<ffffffff81ee1664>] x86_64_start_kernel+0xf1/0xf4 > > -> #1 (&p->pi_lock){-.-.-.}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff810979d1>] try_to_wake_up+0x31/0x350 > [<ffffffff81097d62>] default_wake_function+0x12/0x20 > [<ffffffff81084af8>] autoremove_wake_function+0x18/0x40 > [<ffffffff8108ea38>] __wake_up_common+0x58/0x90 > [<ffffffff8108ff59>] __wake_up+0x39/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff81111b8d>] call_rcu+0x1d/0x20 > [<ffffffff81093697>] cpu_attach_domain+0x287/0x360 > [<ffffffff81099d7e>] build_sched_domains+0xe5e/0x10a0 > [<ffffffff81efa7fc>] sched_init_smp+0x3b7/0x47a > [<ffffffff81ee1f4e>] kernel_init_freeable+0xf6/0x202 > [<ffffffff817200be>] kernel_init+0xe/0x190 > [<ffffffff8173d22c>] ret_from_fork+0x7c/0xb0 > > -> #0 (&rdp->nocb_wq){......}: > [<ffffffff810cb7ca>] __lock_acquire+0x191a/0x1be0 > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff8108ff43>] __wake_up+0x23/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff81111bb0>] kfree_call_rcu+0x20/0x30 > [<ffffffff81149abf>] put_ctx+0x4f/0x70 > [<ffffffff81154c3e>] perf_event_exit_task+0x12e/0x230 > [<ffffffff81056b8d>] do_exit+0x30d/0xcc0 > [<ffffffff8105893c>] do_group_exit+0x4c/0xc0 > [<ffffffff810589c4>] SyS_exit_group+0x14/0x20 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 > > other info that might help us debug this: > > Chain exists of: > &rdp->nocb_wq --> &rq->lock --> &ctx->lock > > Possible unsafe locking scenario: > > CPU0 CPU1 > ---- ---- > lock(&ctx->lock); > lock(&rq->lock); > lock(&ctx->lock); > lock(&rdp->nocb_wq); > > *** DEADLOCK *** > > 1 lock held by trinity-child2/15191: > #0: (&ctx->lock){-.-...}, at: [<ffffffff81154c19>] perf_event_exit_task+0x109/0x230 > > stack backtrace: > CPU: 2 PID: 15191 Comm: trinity-child2 Not tainted 3.12.0-rc3+ #92 > ffffffff82565b70 ffff880070c2dbf8 ffffffff8172a363 ffffffff824edf40 > ffff880070c2dc38 ffffffff81726741 ffff880070c2dc90 ffff88022383b1c0 > ffff88022383aac0 0000000000000000 ffff88022383b188 ffff88022383b1c0 > Call Trace: > [<ffffffff8172a363>] dump_stack+0x4e/0x82 > [<ffffffff81726741>] print_circular_bug+0x200/0x20f > [<ffffffff810cb7ca>] __lock_acquire+0x191a/0x1be0 > [<ffffffff810c6439>] ? get_lock_stats+0x19/0x60 > [<ffffffff8100b2f4>] ? native_sched_clock+0x24/0x80 > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8108ff43>] ? __wake_up+0x23/0x50 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff8108ff43>] ? __wake_up+0x23/0x50 > [<ffffffff8108ff43>] __wake_up+0x23/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff8109bc8f>] ? local_clock+0x3f/0x50 > [<ffffffff81111bb0>] kfree_call_rcu+0x20/0x30 > [<ffffffff81149abf>] put_ctx+0x4f/0x70 > [<ffffffff81154c3e>] perf_event_exit_task+0x12e/0x230 > [<ffffffff81056b8d>] do_exit+0x30d/0xcc0 > [<ffffffff810c9af5>] ? trace_hardirqs_on_caller+0x115/0x1e0 > [<ffffffff810c9bcd>] ? trace_hardirqs_on+0xd/0x10 > [<ffffffff8105893c>] do_group_exit+0x4c/0xc0 > [<ffffffff810589c4>] SyS_exit_group+0x14/0x20 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 The underlying problem is that perf is invoking call_rcu() with the scheduler locks held, but in NOCB mode, call_rcu() will with high probability invoke the scheduler -- which just might want to use its locks. The reason that call_rcu() needs to invoke the scheduler is to wake up the corresponding rcuo callback-offload kthread, which does the job of starting up a grace period and invoking the callbacks afterwards. One solution (championed on a related problem by Lai Jiangshan) is to simply defer the wakeup to some point where scheduler locks are no longer held. Since we don't want to unnecessarily incur the cost of such deferral, the task before us is threefold: 1. Determine when it is likely that a relevant scheduler lock is held. 2. Defer the wakeup in such cases. 3. Ensure that all deferred wakeups eventually happen, preferably sooner rather than later. We use irqs_disabled_flags() as a proxy for relevant scheduler locks being held. This works because the relevant locks are always acquired with interrupts disabled. We may defer more often than needed, but that is at least safe. The wakeup deferral is tracked via a new field in the per-CPU and per-RCU-flavor rcu_data structure, namely ->nocb_defer_wakeup. This flag is checked by the RCU core processing. The __rcu_pending() function now checks this flag, which causes rcu_check_callbacks() to initiate RCU core processing at each scheduling-clock interrupt where this flag is set. Of course this is not sufficient because scheduling-clock interrupts are often turned off (the things we used to be able to count on!). So the flags are also checked on entry to any state that RCU considers to be idle, which includes both NO_HZ_IDLE idle state and NO_HZ_FULL user-mode-execution state. This approach should allow call_rcu() to be invoked regardless of what locks you might be holding, the key word being "should". Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org>
2013-10-05 01:33:34 +04:00
if (!irqs_disabled_flags(flags)) {
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
/* ... if queue was empty ... */
wake_nocb_gp(rdp, false, flags);
trace_rcu_nocb_wake(rcu_state.name, rdp->cpu,
rcu: Break call_rcu() deadlock involving scheduler and perf Dave Jones got the following lockdep splat: > ====================================================== > [ INFO: possible circular locking dependency detected ] > 3.12.0-rc3+ #92 Not tainted > ------------------------------------------------------- > trinity-child2/15191 is trying to acquire lock: > (&rdp->nocb_wq){......}, at: [<ffffffff8108ff43>] __wake_up+0x23/0x50 > > but task is already holding lock: > (&ctx->lock){-.-...}, at: [<ffffffff81154c19>] perf_event_exit_task+0x109/0x230 > > which lock already depends on the new lock. > > > the existing dependency chain (in reverse order) is: > > -> #3 (&ctx->lock){-.-...}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff81733f90>] _raw_spin_lock+0x40/0x80 > [<ffffffff811500ff>] __perf_event_task_sched_out+0x2df/0x5e0 > [<ffffffff81091b83>] perf_event_task_sched_out+0x93/0xa0 > [<ffffffff81732052>] __schedule+0x1d2/0xa20 > [<ffffffff81732f30>] preempt_schedule_irq+0x50/0xb0 > [<ffffffff817352b6>] retint_kernel+0x26/0x30 > [<ffffffff813eed04>] tty_flip_buffer_push+0x34/0x50 > [<ffffffff813f0504>] pty_write+0x54/0x60 > [<ffffffff813e900d>] n_tty_write+0x32d/0x4e0 > [<ffffffff813e5838>] tty_write+0x158/0x2d0 > [<ffffffff811c4850>] vfs_write+0xc0/0x1f0 > [<ffffffff811c52cc>] SyS_write+0x4c/0xa0 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 > > -> #2 (&rq->lock){-.-.-.}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff81733f90>] _raw_spin_lock+0x40/0x80 > [<ffffffff810980b2>] wake_up_new_task+0xc2/0x2e0 > [<ffffffff81054336>] do_fork+0x126/0x460 > [<ffffffff81054696>] kernel_thread+0x26/0x30 > [<ffffffff8171ff93>] rest_init+0x23/0x140 > [<ffffffff81ee1e4b>] start_kernel+0x3f6/0x403 > [<ffffffff81ee1571>] x86_64_start_reservations+0x2a/0x2c > [<ffffffff81ee1664>] x86_64_start_kernel+0xf1/0xf4 > > -> #1 (&p->pi_lock){-.-.-.}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff810979d1>] try_to_wake_up+0x31/0x350 > [<ffffffff81097d62>] default_wake_function+0x12/0x20 > [<ffffffff81084af8>] autoremove_wake_function+0x18/0x40 > [<ffffffff8108ea38>] __wake_up_common+0x58/0x90 > [<ffffffff8108ff59>] __wake_up+0x39/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff81111b8d>] call_rcu+0x1d/0x20 > [<ffffffff81093697>] cpu_attach_domain+0x287/0x360 > [<ffffffff81099d7e>] build_sched_domains+0xe5e/0x10a0 > [<ffffffff81efa7fc>] sched_init_smp+0x3b7/0x47a > [<ffffffff81ee1f4e>] kernel_init_freeable+0xf6/0x202 > [<ffffffff817200be>] kernel_init+0xe/0x190 > [<ffffffff8173d22c>] ret_from_fork+0x7c/0xb0 > > -> #0 (&rdp->nocb_wq){......}: > [<ffffffff810cb7ca>] __lock_acquire+0x191a/0x1be0 > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff8108ff43>] __wake_up+0x23/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff81111bb0>] kfree_call_rcu+0x20/0x30 > [<ffffffff81149abf>] put_ctx+0x4f/0x70 > [<ffffffff81154c3e>] perf_event_exit_task+0x12e/0x230 > [<ffffffff81056b8d>] do_exit+0x30d/0xcc0 > [<ffffffff8105893c>] do_group_exit+0x4c/0xc0 > [<ffffffff810589c4>] SyS_exit_group+0x14/0x20 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 > > other info that might help us debug this: > > Chain exists of: > &rdp->nocb_wq --> &rq->lock --> &ctx->lock > > Possible unsafe locking scenario: > > CPU0 CPU1 > ---- ---- > lock(&ctx->lock); > lock(&rq->lock); > lock(&ctx->lock); > lock(&rdp->nocb_wq); > > *** DEADLOCK *** > > 1 lock held by trinity-child2/15191: > #0: (&ctx->lock){-.-...}, at: [<ffffffff81154c19>] perf_event_exit_task+0x109/0x230 > > stack backtrace: > CPU: 2 PID: 15191 Comm: trinity-child2 Not tainted 3.12.0-rc3+ #92 > ffffffff82565b70 ffff880070c2dbf8 ffffffff8172a363 ffffffff824edf40 > ffff880070c2dc38 ffffffff81726741 ffff880070c2dc90 ffff88022383b1c0 > ffff88022383aac0 0000000000000000 ffff88022383b188 ffff88022383b1c0 > Call Trace: > [<ffffffff8172a363>] dump_stack+0x4e/0x82 > [<ffffffff81726741>] print_circular_bug+0x200/0x20f > [<ffffffff810cb7ca>] __lock_acquire+0x191a/0x1be0 > [<ffffffff810c6439>] ? get_lock_stats+0x19/0x60 > [<ffffffff8100b2f4>] ? native_sched_clock+0x24/0x80 > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8108ff43>] ? __wake_up+0x23/0x50 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff8108ff43>] ? __wake_up+0x23/0x50 > [<ffffffff8108ff43>] __wake_up+0x23/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff8109bc8f>] ? local_clock+0x3f/0x50 > [<ffffffff81111bb0>] kfree_call_rcu+0x20/0x30 > [<ffffffff81149abf>] put_ctx+0x4f/0x70 > [<ffffffff81154c3e>] perf_event_exit_task+0x12e/0x230 > [<ffffffff81056b8d>] do_exit+0x30d/0xcc0 > [<ffffffff810c9af5>] ? trace_hardirqs_on_caller+0x115/0x1e0 > [<ffffffff810c9bcd>] ? trace_hardirqs_on+0xd/0x10 > [<ffffffff8105893c>] do_group_exit+0x4c/0xc0 > [<ffffffff810589c4>] SyS_exit_group+0x14/0x20 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 The underlying problem is that perf is invoking call_rcu() with the scheduler locks held, but in NOCB mode, call_rcu() will with high probability invoke the scheduler -- which just might want to use its locks. The reason that call_rcu() needs to invoke the scheduler is to wake up the corresponding rcuo callback-offload kthread, which does the job of starting up a grace period and invoking the callbacks afterwards. One solution (championed on a related problem by Lai Jiangshan) is to simply defer the wakeup to some point where scheduler locks are no longer held. Since we don't want to unnecessarily incur the cost of such deferral, the task before us is threefold: 1. Determine when it is likely that a relevant scheduler lock is held. 2. Defer the wakeup in such cases. 3. Ensure that all deferred wakeups eventually happen, preferably sooner rather than later. We use irqs_disabled_flags() as a proxy for relevant scheduler locks being held. This works because the relevant locks are always acquired with interrupts disabled. We may defer more often than needed, but that is at least safe. The wakeup deferral is tracked via a new field in the per-CPU and per-RCU-flavor rcu_data structure, namely ->nocb_defer_wakeup. This flag is checked by the RCU core processing. The __rcu_pending() function now checks this flag, which causes rcu_check_callbacks() to initiate RCU core processing at each scheduling-clock interrupt where this flag is set. Of course this is not sufficient because scheduling-clock interrupts are often turned off (the things we used to be able to count on!). So the flags are also checked on entry to any state that RCU considers to be idle, which includes both NO_HZ_IDLE idle state and NO_HZ_FULL user-mode-execution state. This approach should allow call_rcu() to be invoked regardless of what locks you might be holding, the key word being "should". Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org>
2013-10-05 01:33:34 +04:00
TPS("WakeEmpty"));
} else {
wake_nocb_gp_defer(rdp, RCU_NOCB_WAKE,
TPS("WakeEmptyIsDeferred"));
rcu_nocb_unlock_irqrestore(rdp, flags);
rcu: Break call_rcu() deadlock involving scheduler and perf Dave Jones got the following lockdep splat: > ====================================================== > [ INFO: possible circular locking dependency detected ] > 3.12.0-rc3+ #92 Not tainted > ------------------------------------------------------- > trinity-child2/15191 is trying to acquire lock: > (&rdp->nocb_wq){......}, at: [<ffffffff8108ff43>] __wake_up+0x23/0x50 > > but task is already holding lock: > (&ctx->lock){-.-...}, at: [<ffffffff81154c19>] perf_event_exit_task+0x109/0x230 > > which lock already depends on the new lock. > > > the existing dependency chain (in reverse order) is: > > -> #3 (&ctx->lock){-.-...}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff81733f90>] _raw_spin_lock+0x40/0x80 > [<ffffffff811500ff>] __perf_event_task_sched_out+0x2df/0x5e0 > [<ffffffff81091b83>] perf_event_task_sched_out+0x93/0xa0 > [<ffffffff81732052>] __schedule+0x1d2/0xa20 > [<ffffffff81732f30>] preempt_schedule_irq+0x50/0xb0 > [<ffffffff817352b6>] retint_kernel+0x26/0x30 > [<ffffffff813eed04>] tty_flip_buffer_push+0x34/0x50 > [<ffffffff813f0504>] pty_write+0x54/0x60 > [<ffffffff813e900d>] n_tty_write+0x32d/0x4e0 > [<ffffffff813e5838>] tty_write+0x158/0x2d0 > [<ffffffff811c4850>] vfs_write+0xc0/0x1f0 > [<ffffffff811c52cc>] SyS_write+0x4c/0xa0 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 > > -> #2 (&rq->lock){-.-.-.}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff81733f90>] _raw_spin_lock+0x40/0x80 > [<ffffffff810980b2>] wake_up_new_task+0xc2/0x2e0 > [<ffffffff81054336>] do_fork+0x126/0x460 > [<ffffffff81054696>] kernel_thread+0x26/0x30 > [<ffffffff8171ff93>] rest_init+0x23/0x140 > [<ffffffff81ee1e4b>] start_kernel+0x3f6/0x403 > [<ffffffff81ee1571>] x86_64_start_reservations+0x2a/0x2c > [<ffffffff81ee1664>] x86_64_start_kernel+0xf1/0xf4 > > -> #1 (&p->pi_lock){-.-.-.}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff810979d1>] try_to_wake_up+0x31/0x350 > [<ffffffff81097d62>] default_wake_function+0x12/0x20 > [<ffffffff81084af8>] autoremove_wake_function+0x18/0x40 > [<ffffffff8108ea38>] __wake_up_common+0x58/0x90 > [<ffffffff8108ff59>] __wake_up+0x39/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff81111b8d>] call_rcu+0x1d/0x20 > [<ffffffff81093697>] cpu_attach_domain+0x287/0x360 > [<ffffffff81099d7e>] build_sched_domains+0xe5e/0x10a0 > [<ffffffff81efa7fc>] sched_init_smp+0x3b7/0x47a > [<ffffffff81ee1f4e>] kernel_init_freeable+0xf6/0x202 > [<ffffffff817200be>] kernel_init+0xe/0x190 > [<ffffffff8173d22c>] ret_from_fork+0x7c/0xb0 > > -> #0 (&rdp->nocb_wq){......}: > [<ffffffff810cb7ca>] __lock_acquire+0x191a/0x1be0 > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff8108ff43>] __wake_up+0x23/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff81111bb0>] kfree_call_rcu+0x20/0x30 > [<ffffffff81149abf>] put_ctx+0x4f/0x70 > [<ffffffff81154c3e>] perf_event_exit_task+0x12e/0x230 > [<ffffffff81056b8d>] do_exit+0x30d/0xcc0 > [<ffffffff8105893c>] do_group_exit+0x4c/0xc0 > [<ffffffff810589c4>] SyS_exit_group+0x14/0x20 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 > > other info that might help us debug this: > > Chain exists of: > &rdp->nocb_wq --> &rq->lock --> &ctx->lock > > Possible unsafe locking scenario: > > CPU0 CPU1 > ---- ---- > lock(&ctx->lock); > lock(&rq->lock); > lock(&ctx->lock); > lock(&rdp->nocb_wq); > > *** DEADLOCK *** > > 1 lock held by trinity-child2/15191: > #0: (&ctx->lock){-.-...}, at: [<ffffffff81154c19>] perf_event_exit_task+0x109/0x230 > > stack backtrace: > CPU: 2 PID: 15191 Comm: trinity-child2 Not tainted 3.12.0-rc3+ #92 > ffffffff82565b70 ffff880070c2dbf8 ffffffff8172a363 ffffffff824edf40 > ffff880070c2dc38 ffffffff81726741 ffff880070c2dc90 ffff88022383b1c0 > ffff88022383aac0 0000000000000000 ffff88022383b188 ffff88022383b1c0 > Call Trace: > [<ffffffff8172a363>] dump_stack+0x4e/0x82 > [<ffffffff81726741>] print_circular_bug+0x200/0x20f > [<ffffffff810cb7ca>] __lock_acquire+0x191a/0x1be0 > [<ffffffff810c6439>] ? get_lock_stats+0x19/0x60 > [<ffffffff8100b2f4>] ? native_sched_clock+0x24/0x80 > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8108ff43>] ? __wake_up+0x23/0x50 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff8108ff43>] ? __wake_up+0x23/0x50 > [<ffffffff8108ff43>] __wake_up+0x23/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff8109bc8f>] ? local_clock+0x3f/0x50 > [<ffffffff81111bb0>] kfree_call_rcu+0x20/0x30 > [<ffffffff81149abf>] put_ctx+0x4f/0x70 > [<ffffffff81154c3e>] perf_event_exit_task+0x12e/0x230 > [<ffffffff81056b8d>] do_exit+0x30d/0xcc0 > [<ffffffff810c9af5>] ? trace_hardirqs_on_caller+0x115/0x1e0 > [<ffffffff810c9bcd>] ? trace_hardirqs_on+0xd/0x10 > [<ffffffff8105893c>] do_group_exit+0x4c/0xc0 > [<ffffffff810589c4>] SyS_exit_group+0x14/0x20 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 The underlying problem is that perf is invoking call_rcu() with the scheduler locks held, but in NOCB mode, call_rcu() will with high probability invoke the scheduler -- which just might want to use its locks. The reason that call_rcu() needs to invoke the scheduler is to wake up the corresponding rcuo callback-offload kthread, which does the job of starting up a grace period and invoking the callbacks afterwards. One solution (championed on a related problem by Lai Jiangshan) is to simply defer the wakeup to some point where scheduler locks are no longer held. Since we don't want to unnecessarily incur the cost of such deferral, the task before us is threefold: 1. Determine when it is likely that a relevant scheduler lock is held. 2. Defer the wakeup in such cases. 3. Ensure that all deferred wakeups eventually happen, preferably sooner rather than later. We use irqs_disabled_flags() as a proxy for relevant scheduler locks being held. This works because the relevant locks are always acquired with interrupts disabled. We may defer more often than needed, but that is at least safe. The wakeup deferral is tracked via a new field in the per-CPU and per-RCU-flavor rcu_data structure, namely ->nocb_defer_wakeup. This flag is checked by the RCU core processing. The __rcu_pending() function now checks this flag, which causes rcu_check_callbacks() to initiate RCU core processing at each scheduling-clock interrupt where this flag is set. Of course this is not sufficient because scheduling-clock interrupts are often turned off (the things we used to be able to count on!). So the flags are also checked on entry to any state that RCU considers to be idle, which includes both NO_HZ_IDLE idle state and NO_HZ_FULL user-mode-execution state. This approach should allow call_rcu() to be invoked regardless of what locks you might be holding, the key word being "should". Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org>
2013-10-05 01:33:34 +04:00
}
} else if (len > rdp->qlen_last_fqs_check + qhimark) {
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
/* ... or if many callbacks queued. */
rdp->qlen_last_fqs_check = len;
j = jiffies;
if (j != rdp->nocb_gp_adv_time &&
rcu_segcblist_nextgp(&rdp->cblist, &cur_gp_seq) &&
rcu_seq_done(&rdp->mynode->gp_seq, cur_gp_seq)) {
rcu_advance_cbs_nowake(rdp->mynode, rdp);
rdp->nocb_gp_adv_time = j;
}
smp_mb(); /* Enqueue before timer_pending(). */
if ((rdp->nocb_cb_sleep ||
!rcu_segcblist_ready_cbs(&rdp->cblist)) &&
!timer_pending(&rdp->nocb_bypass_timer))
wake_nocb_gp_defer(rdp, RCU_NOCB_WAKE_FORCE,
TPS("WakeOvfIsDeferred"));
rcu_nocb_unlock_irqrestore(rdp, flags);
} else {
trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, TPS("WakeNot"));
rcu_nocb_unlock_irqrestore(rdp, flags);
}
return;
}
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
/* Wake up the no-CBs GP kthread to flush ->nocb_bypass. */
static void do_nocb_bypass_wakeup_timer(struct timer_list *t)
{
unsigned long flags;
struct rcu_data *rdp = from_timer(rdp, t, nocb_bypass_timer);
trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, TPS("Timer"));
rcu_nocb_lock_irqsave(rdp, flags);
smp_mb__after_spinlock(); /* Timer expire before wakeup. */
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
__call_rcu_nocb_wake(rdp, true, flags);
}
/*
* No-CBs GP kthreads come here to wait for additional callbacks to show up
* or for grace periods to end.
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
*/
rcu/nocb: Provide separate no-CBs grace-period kthreads Currently, there is one no-CBs rcuo kthread per CPU, and these kthreads are divided into groups. The first rcuo kthread to come online in a given group is that group's leader, and the leader both waits for grace periods and invokes its CPU's callbacks. The non-leader rcuo kthreads only invoke callbacks. This works well in the real-time/embedded environments for which it was intended because such environments tend not to generate all that many callbacks. However, given huge floods of callbacks, it is possible for the leader kthread to be stuck invoking callbacks while its followers wait helplessly while their callbacks pile up. This is a good recipe for an OOM, and rcutorture's new callback-flood capability does generate such OOMs. One strategy would be to wait until such OOMs start happening in production, but similar OOMs have in fact happened starting in 2018. It would therefore be wise to take a more proactive approach. This commit therefore features per-CPU rcuo kthreads that do nothing but invoke callbacks. Instead of having one of these kthreads act as leader, each group has a separate rcog kthread that handles grace periods for its group. Because these rcuog kthreads do not invoke callbacks, callback floods on one CPU no longer block callbacks from reaching the rcuc callback-invocation kthreads on other CPUs. This change does introduce additional kthreads, however: 1. The number of additional kthreads is about the square root of the number of CPUs, so that a 4096-CPU system would have only about 64 additional kthreads. Note that recent changes decreased the number of rcuo kthreads by a factor of two (CONFIG_PREEMPT=n) or even three (CONFIG_PREEMPT=y), so this still represents a significant improvement on most systems. 2. The leading "rcuo" of the rcuog kthreads should allow existing scripting to affinity these additional kthreads as needed, the same as for the rcuop and rcuos kthreads. (There are no longer any rcuob kthreads.) 3. A state-machine approach was considered and rejected. Although this would allow the rcuo kthreads to continue their dual leader/follower roles, it complicates callback invocation and makes it more difficult to consolidate rcuo callback invocation with existing softirq callback invocation. The introduction of rcuog kthreads should thus be acceptable. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-03-30 02:43:51 +03:00
static void nocb_gp_wait(struct rcu_data *my_rdp)
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
{
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
bool bypass = false;
long bypass_ncbs;
int __maybe_unused cpu = my_rdp->cpu;
unsigned long cur_gp_seq;
unsigned long flags;
bool gotcbs = false;
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
unsigned long j = jiffies;
bool needwait_gp = false; // This prevents actual uninitialized use.
bool needwake;
bool needwake_gp;
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
struct rcu_data *rdp;
struct rcu_node *rnp;
unsigned long wait_gp_seq = 0; // Suppress "use uninitialized" warning.
bool wasempty = false;
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
/*
* Each pass through the following loop checks for CBs and for the
* nearest grace period (if any) to wait for next. The CB kthreads
* and the global grace-period kthread are awakened if needed.
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
*/
WARN_ON_ONCE(my_rdp->nocb_gp_rdp != my_rdp);
for (rdp = my_rdp; rdp; rdp = rdp->nocb_next_cb_rdp) {
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, TPS("Check"));
rcu_nocb_lock_irqsave(rdp, flags);
bypass_ncbs = rcu_cblist_n_cbs(&rdp->nocb_bypass);
if (bypass_ncbs &&
(time_after(j, READ_ONCE(rdp->nocb_bypass_first) + 1) ||
bypass_ncbs > 2 * qhimark)) {
// Bypass full or old, so flush it.
(void)rcu_nocb_try_flush_bypass(rdp, j);
bypass_ncbs = rcu_cblist_n_cbs(&rdp->nocb_bypass);
} else if (!bypass_ncbs && rcu_segcblist_empty(&rdp->cblist)) {
rcu_nocb_unlock_irqrestore(rdp, flags);
continue; /* No callbacks here, try next. */
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
}
if (bypass_ncbs) {
trace_rcu_nocb_wake(rcu_state.name, rdp->cpu,
TPS("Bypass"));
bypass = true;
}
rnp = rdp->mynode;
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
if (bypass) { // Avoid race with first bypass CB.
WRITE_ONCE(my_rdp->nocb_defer_wakeup,
RCU_NOCB_WAKE_NOT);
del_timer(&my_rdp->nocb_timer);
}
// Advance callbacks if helpful and low contention.
needwake_gp = false;
if (!rcu_segcblist_restempty(&rdp->cblist,
RCU_NEXT_READY_TAIL) ||
(rcu_segcblist_nextgp(&rdp->cblist, &cur_gp_seq) &&
rcu_seq_done(&rnp->gp_seq, cur_gp_seq))) {
raw_spin_lock_rcu_node(rnp); /* irqs disabled. */
needwake_gp = rcu_advance_cbs(rnp, rdp);
wasempty = rcu_segcblist_restempty(&rdp->cblist,
RCU_NEXT_READY_TAIL);
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
raw_spin_unlock_rcu_node(rnp); /* irqs disabled. */
}
// Need to wait on some grace period?
WARN_ON_ONCE(wasempty &&
!rcu_segcblist_restempty(&rdp->cblist,
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
RCU_NEXT_READY_TAIL));
if (rcu_segcblist_nextgp(&rdp->cblist, &cur_gp_seq)) {
if (!needwait_gp ||
ULONG_CMP_LT(cur_gp_seq, wait_gp_seq))
wait_gp_seq = cur_gp_seq;
needwait_gp = true;
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
trace_rcu_nocb_wake(rcu_state.name, rdp->cpu,
TPS("NeedWaitGP"));
}
if (rcu_segcblist_ready_cbs(&rdp->cblist)) {
needwake = rdp->nocb_cb_sleep;
WRITE_ONCE(rdp->nocb_cb_sleep, false);
smp_mb(); /* CB invocation -after- GP end. */
} else {
needwake = false;
}
rcu_nocb_unlock_irqrestore(rdp, flags);
if (needwake) {
rcu/nocb: Provide separate no-CBs grace-period kthreads Currently, there is one no-CBs rcuo kthread per CPU, and these kthreads are divided into groups. The first rcuo kthread to come online in a given group is that group's leader, and the leader both waits for grace periods and invokes its CPU's callbacks. The non-leader rcuo kthreads only invoke callbacks. This works well in the real-time/embedded environments for which it was intended because such environments tend not to generate all that many callbacks. However, given huge floods of callbacks, it is possible for the leader kthread to be stuck invoking callbacks while its followers wait helplessly while their callbacks pile up. This is a good recipe for an OOM, and rcutorture's new callback-flood capability does generate such OOMs. One strategy would be to wait until such OOMs start happening in production, but similar OOMs have in fact happened starting in 2018. It would therefore be wise to take a more proactive approach. This commit therefore features per-CPU rcuo kthreads that do nothing but invoke callbacks. Instead of having one of these kthreads act as leader, each group has a separate rcog kthread that handles grace periods for its group. Because these rcuog kthreads do not invoke callbacks, callback floods on one CPU no longer block callbacks from reaching the rcuc callback-invocation kthreads on other CPUs. This change does introduce additional kthreads, however: 1. The number of additional kthreads is about the square root of the number of CPUs, so that a 4096-CPU system would have only about 64 additional kthreads. Note that recent changes decreased the number of rcuo kthreads by a factor of two (CONFIG_PREEMPT=n) or even three (CONFIG_PREEMPT=y), so this still represents a significant improvement on most systems. 2. The leading "rcuo" of the rcuog kthreads should allow existing scripting to affinity these additional kthreads as needed, the same as for the rcuop and rcuos kthreads. (There are no longer any rcuob kthreads.) 3. A state-machine approach was considered and rejected. Although this would allow the rcuo kthreads to continue their dual leader/follower roles, it complicates callback invocation and makes it more difficult to consolidate rcuo callback invocation with existing softirq callback invocation. The introduction of rcuog kthreads should thus be acceptable. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-03-30 02:43:51 +03:00
swake_up_one(&rdp->nocb_cb_wq);
gotcbs = true;
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
}
if (needwake_gp)
rcu_gp_kthread_wake();
}
my_rdp->nocb_gp_bypass = bypass;
my_rdp->nocb_gp_gp = needwait_gp;
my_rdp->nocb_gp_seq = needwait_gp ? wait_gp_seq : 0;
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
if (bypass && !rcu_nocb_poll) {
// At least one child with non-empty ->nocb_bypass, so set
// timer in order to avoid stranding its callbacks.
raw_spin_lock_irqsave(&my_rdp->nocb_gp_lock, flags);
mod_timer(&my_rdp->nocb_bypass_timer, j + 2);
raw_spin_unlock_irqrestore(&my_rdp->nocb_gp_lock, flags);
}
if (rcu_nocb_poll) {
/* Polling, so trace if first poll in the series. */
if (gotcbs)
trace_rcu_nocb_wake(rcu_state.name, cpu, TPS("Poll"));
schedule_timeout_idle(1);
} else if (!needwait_gp) {
/* Wait for callbacks to appear. */
trace_rcu_nocb_wake(rcu_state.name, cpu, TPS("Sleep"));
swait_event_interruptible_exclusive(my_rdp->nocb_gp_wq,
!READ_ONCE(my_rdp->nocb_gp_sleep));
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
trace_rcu_nocb_wake(rcu_state.name, cpu, TPS("EndSleep"));
} else {
rnp = my_rdp->mynode;
trace_rcu_this_gp(rnp, my_rdp, wait_gp_seq, TPS("StartWait"));
swait_event_interruptible_exclusive(
rnp->nocb_gp_wq[rcu_seq_ctr(wait_gp_seq) & 0x1],
rcu_seq_done(&rnp->gp_seq, wait_gp_seq) ||
!READ_ONCE(my_rdp->nocb_gp_sleep));
trace_rcu_this_gp(rnp, my_rdp, wait_gp_seq, TPS("EndWait"));
}
if (!rcu_nocb_poll) {
raw_spin_lock_irqsave(&my_rdp->nocb_gp_lock, flags);
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
if (bypass)
del_timer(&my_rdp->nocb_bypass_timer);
WRITE_ONCE(my_rdp->nocb_gp_sleep, true);
raw_spin_unlock_irqrestore(&my_rdp->nocb_gp_lock, flags);
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
}
my_rdp->nocb_gp_seq = -1;
WARN_ON(signal_pending(current));
rcu/nocb: Provide separate no-CBs grace-period kthreads Currently, there is one no-CBs rcuo kthread per CPU, and these kthreads are divided into groups. The first rcuo kthread to come online in a given group is that group's leader, and the leader both waits for grace periods and invokes its CPU's callbacks. The non-leader rcuo kthreads only invoke callbacks. This works well in the real-time/embedded environments for which it was intended because such environments tend not to generate all that many callbacks. However, given huge floods of callbacks, it is possible for the leader kthread to be stuck invoking callbacks while its followers wait helplessly while their callbacks pile up. This is a good recipe for an OOM, and rcutorture's new callback-flood capability does generate such OOMs. One strategy would be to wait until such OOMs start happening in production, but similar OOMs have in fact happened starting in 2018. It would therefore be wise to take a more proactive approach. This commit therefore features per-CPU rcuo kthreads that do nothing but invoke callbacks. Instead of having one of these kthreads act as leader, each group has a separate rcog kthread that handles grace periods for its group. Because these rcuog kthreads do not invoke callbacks, callback floods on one CPU no longer block callbacks from reaching the rcuc callback-invocation kthreads on other CPUs. This change does introduce additional kthreads, however: 1. The number of additional kthreads is about the square root of the number of CPUs, so that a 4096-CPU system would have only about 64 additional kthreads. Note that recent changes decreased the number of rcuo kthreads by a factor of two (CONFIG_PREEMPT=n) or even three (CONFIG_PREEMPT=y), so this still represents a significant improvement on most systems. 2. The leading "rcuo" of the rcuog kthreads should allow existing scripting to affinity these additional kthreads as needed, the same as for the rcuop and rcuos kthreads. (There are no longer any rcuob kthreads.) 3. A state-machine approach was considered and rejected. Although this would allow the rcuo kthreads to continue their dual leader/follower roles, it complicates callback invocation and makes it more difficult to consolidate rcuo callback invocation with existing softirq callback invocation. The introduction of rcuog kthreads should thus be acceptable. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-03-30 02:43:51 +03:00
}
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
rcu/nocb: Provide separate no-CBs grace-period kthreads Currently, there is one no-CBs rcuo kthread per CPU, and these kthreads are divided into groups. The first rcuo kthread to come online in a given group is that group's leader, and the leader both waits for grace periods and invokes its CPU's callbacks. The non-leader rcuo kthreads only invoke callbacks. This works well in the real-time/embedded environments for which it was intended because such environments tend not to generate all that many callbacks. However, given huge floods of callbacks, it is possible for the leader kthread to be stuck invoking callbacks while its followers wait helplessly while their callbacks pile up. This is a good recipe for an OOM, and rcutorture's new callback-flood capability does generate such OOMs. One strategy would be to wait until such OOMs start happening in production, but similar OOMs have in fact happened starting in 2018. It would therefore be wise to take a more proactive approach. This commit therefore features per-CPU rcuo kthreads that do nothing but invoke callbacks. Instead of having one of these kthreads act as leader, each group has a separate rcog kthread that handles grace periods for its group. Because these rcuog kthreads do not invoke callbacks, callback floods on one CPU no longer block callbacks from reaching the rcuc callback-invocation kthreads on other CPUs. This change does introduce additional kthreads, however: 1. The number of additional kthreads is about the square root of the number of CPUs, so that a 4096-CPU system would have only about 64 additional kthreads. Note that recent changes decreased the number of rcuo kthreads by a factor of two (CONFIG_PREEMPT=n) or even three (CONFIG_PREEMPT=y), so this still represents a significant improvement on most systems. 2. The leading "rcuo" of the rcuog kthreads should allow existing scripting to affinity these additional kthreads as needed, the same as for the rcuop and rcuos kthreads. (There are no longer any rcuob kthreads.) 3. A state-machine approach was considered and rejected. Although this would allow the rcuo kthreads to continue their dual leader/follower roles, it complicates callback invocation and makes it more difficult to consolidate rcuo callback invocation with existing softirq callback invocation. The introduction of rcuog kthreads should thus be acceptable. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-03-30 02:43:51 +03:00
/*
* No-CBs grace-period-wait kthread. There is one of these per group
* of CPUs, but only once at least one CPU in that group has come online
* at least once since boot. This kthread checks for newly posted
* callbacks from any of the CPUs it is responsible for, waits for a
* grace period, then awakens all of the rcu_nocb_cb_kthread() instances
* that then have callback-invocation work to do.
*/
static int rcu_nocb_gp_kthread(void *arg)
{
struct rcu_data *rdp = arg;
for (;;) {
WRITE_ONCE(rdp->nocb_gp_loops, rdp->nocb_gp_loops + 1);
rcu/nocb: Provide separate no-CBs grace-period kthreads Currently, there is one no-CBs rcuo kthread per CPU, and these kthreads are divided into groups. The first rcuo kthread to come online in a given group is that group's leader, and the leader both waits for grace periods and invokes its CPU's callbacks. The non-leader rcuo kthreads only invoke callbacks. This works well in the real-time/embedded environments for which it was intended because such environments tend not to generate all that many callbacks. However, given huge floods of callbacks, it is possible for the leader kthread to be stuck invoking callbacks while its followers wait helplessly while their callbacks pile up. This is a good recipe for an OOM, and rcutorture's new callback-flood capability does generate such OOMs. One strategy would be to wait until such OOMs start happening in production, but similar OOMs have in fact happened starting in 2018. It would therefore be wise to take a more proactive approach. This commit therefore features per-CPU rcuo kthreads that do nothing but invoke callbacks. Instead of having one of these kthreads act as leader, each group has a separate rcog kthread that handles grace periods for its group. Because these rcuog kthreads do not invoke callbacks, callback floods on one CPU no longer block callbacks from reaching the rcuc callback-invocation kthreads on other CPUs. This change does introduce additional kthreads, however: 1. The number of additional kthreads is about the square root of the number of CPUs, so that a 4096-CPU system would have only about 64 additional kthreads. Note that recent changes decreased the number of rcuo kthreads by a factor of two (CONFIG_PREEMPT=n) or even three (CONFIG_PREEMPT=y), so this still represents a significant improvement on most systems. 2. The leading "rcuo" of the rcuog kthreads should allow existing scripting to affinity these additional kthreads as needed, the same as for the rcuop and rcuos kthreads. (There are no longer any rcuob kthreads.) 3. A state-machine approach was considered and rejected. Although this would allow the rcuo kthreads to continue their dual leader/follower roles, it complicates callback invocation and makes it more difficult to consolidate rcuo callback invocation with existing softirq callback invocation. The introduction of rcuog kthreads should thus be acceptable. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-03-30 02:43:51 +03:00
nocb_gp_wait(rdp);
cond_resched_tasks_rcu_qs();
}
rcu/nocb: Provide separate no-CBs grace-period kthreads Currently, there is one no-CBs rcuo kthread per CPU, and these kthreads are divided into groups. The first rcuo kthread to come online in a given group is that group's leader, and the leader both waits for grace periods and invokes its CPU's callbacks. The non-leader rcuo kthreads only invoke callbacks. This works well in the real-time/embedded environments for which it was intended because such environments tend not to generate all that many callbacks. However, given huge floods of callbacks, it is possible for the leader kthread to be stuck invoking callbacks while its followers wait helplessly while their callbacks pile up. This is a good recipe for an OOM, and rcutorture's new callback-flood capability does generate such OOMs. One strategy would be to wait until such OOMs start happening in production, but similar OOMs have in fact happened starting in 2018. It would therefore be wise to take a more proactive approach. This commit therefore features per-CPU rcuo kthreads that do nothing but invoke callbacks. Instead of having one of these kthreads act as leader, each group has a separate rcog kthread that handles grace periods for its group. Because these rcuog kthreads do not invoke callbacks, callback floods on one CPU no longer block callbacks from reaching the rcuc callback-invocation kthreads on other CPUs. This change does introduce additional kthreads, however: 1. The number of additional kthreads is about the square root of the number of CPUs, so that a 4096-CPU system would have only about 64 additional kthreads. Note that recent changes decreased the number of rcuo kthreads by a factor of two (CONFIG_PREEMPT=n) or even three (CONFIG_PREEMPT=y), so this still represents a significant improvement on most systems. 2. The leading "rcuo" of the rcuog kthreads should allow existing scripting to affinity these additional kthreads as needed, the same as for the rcuop and rcuos kthreads. (There are no longer any rcuob kthreads.) 3. A state-machine approach was considered and rejected. Although this would allow the rcuo kthreads to continue their dual leader/follower roles, it complicates callback invocation and makes it more difficult to consolidate rcuo callback invocation with existing softirq callback invocation. The introduction of rcuog kthreads should thus be acceptable. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-03-30 02:43:51 +03:00
return 0;
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
}
/*
* Invoke any ready callbacks from the corresponding no-CBs CPU,
* then, if there are no more, wait for more to appear.
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
*/
static void nocb_cb_wait(struct rcu_data *rdp)
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
{
unsigned long cur_gp_seq;
unsigned long flags;
bool needwake_gp = false;
struct rcu_node *rnp = rdp->mynode;
local_irq_save(flags);
rcu_momentary_dyntick_idle();
local_irq_restore(flags);
local_bh_disable();
rcu_do_batch(rdp);
local_bh_enable();
lockdep_assert_irqs_enabled();
rcu_nocb_lock_irqsave(rdp, flags);
if (rcu_segcblist_nextgp(&rdp->cblist, &cur_gp_seq) &&
rcu_seq_done(&rnp->gp_seq, cur_gp_seq) &&
raw_spin_trylock_rcu_node(rnp)) { /* irqs already disabled. */
needwake_gp = rcu_advance_cbs(rdp->mynode, rdp);
raw_spin_unlock_rcu_node(rnp); /* irqs remain disabled. */
}
if (rcu_segcblist_ready_cbs(&rdp->cblist)) {
rcu_nocb_unlock_irqrestore(rdp, flags);
if (needwake_gp)
rcu_gp_kthread_wake();
return;
}
trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, TPS("CBSleep"));
WRITE_ONCE(rdp->nocb_cb_sleep, true);
rcu_nocb_unlock_irqrestore(rdp, flags);
if (needwake_gp)
rcu_gp_kthread_wake();
rcu/nocb: Provide separate no-CBs grace-period kthreads Currently, there is one no-CBs rcuo kthread per CPU, and these kthreads are divided into groups. The first rcuo kthread to come online in a given group is that group's leader, and the leader both waits for grace periods and invokes its CPU's callbacks. The non-leader rcuo kthreads only invoke callbacks. This works well in the real-time/embedded environments for which it was intended because such environments tend not to generate all that many callbacks. However, given huge floods of callbacks, it is possible for the leader kthread to be stuck invoking callbacks while its followers wait helplessly while their callbacks pile up. This is a good recipe for an OOM, and rcutorture's new callback-flood capability does generate such OOMs. One strategy would be to wait until such OOMs start happening in production, but similar OOMs have in fact happened starting in 2018. It would therefore be wise to take a more proactive approach. This commit therefore features per-CPU rcuo kthreads that do nothing but invoke callbacks. Instead of having one of these kthreads act as leader, each group has a separate rcog kthread that handles grace periods for its group. Because these rcuog kthreads do not invoke callbacks, callback floods on one CPU no longer block callbacks from reaching the rcuc callback-invocation kthreads on other CPUs. This change does introduce additional kthreads, however: 1. The number of additional kthreads is about the square root of the number of CPUs, so that a 4096-CPU system would have only about 64 additional kthreads. Note that recent changes decreased the number of rcuo kthreads by a factor of two (CONFIG_PREEMPT=n) or even three (CONFIG_PREEMPT=y), so this still represents a significant improvement on most systems. 2. The leading "rcuo" of the rcuog kthreads should allow existing scripting to affinity these additional kthreads as needed, the same as for the rcuop and rcuos kthreads. (There are no longer any rcuob kthreads.) 3. A state-machine approach was considered and rejected. Although this would allow the rcuo kthreads to continue their dual leader/follower roles, it complicates callback invocation and makes it more difficult to consolidate rcuo callback invocation with existing softirq callback invocation. The introduction of rcuog kthreads should thus be acceptable. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-03-30 02:43:51 +03:00
swait_event_interruptible_exclusive(rdp->nocb_cb_wq,
!READ_ONCE(rdp->nocb_cb_sleep));
if (!smp_load_acquire(&rdp->nocb_cb_sleep)) { /* VVV */
/* ^^^ Ensure CB invocation follows _sleep test. */
return;
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
}
rcu/nocb: Provide separate no-CBs grace-period kthreads Currently, there is one no-CBs rcuo kthread per CPU, and these kthreads are divided into groups. The first rcuo kthread to come online in a given group is that group's leader, and the leader both waits for grace periods and invokes its CPU's callbacks. The non-leader rcuo kthreads only invoke callbacks. This works well in the real-time/embedded environments for which it was intended because such environments tend not to generate all that many callbacks. However, given huge floods of callbacks, it is possible for the leader kthread to be stuck invoking callbacks while its followers wait helplessly while their callbacks pile up. This is a good recipe for an OOM, and rcutorture's new callback-flood capability does generate such OOMs. One strategy would be to wait until such OOMs start happening in production, but similar OOMs have in fact happened starting in 2018. It would therefore be wise to take a more proactive approach. This commit therefore features per-CPU rcuo kthreads that do nothing but invoke callbacks. Instead of having one of these kthreads act as leader, each group has a separate rcog kthread that handles grace periods for its group. Because these rcuog kthreads do not invoke callbacks, callback floods on one CPU no longer block callbacks from reaching the rcuc callback-invocation kthreads on other CPUs. This change does introduce additional kthreads, however: 1. The number of additional kthreads is about the square root of the number of CPUs, so that a 4096-CPU system would have only about 64 additional kthreads. Note that recent changes decreased the number of rcuo kthreads by a factor of two (CONFIG_PREEMPT=n) or even three (CONFIG_PREEMPT=y), so this still represents a significant improvement on most systems. 2. The leading "rcuo" of the rcuog kthreads should allow existing scripting to affinity these additional kthreads as needed, the same as for the rcuop and rcuos kthreads. (There are no longer any rcuob kthreads.) 3. A state-machine approach was considered and rejected. Although this would allow the rcuo kthreads to continue their dual leader/follower roles, it complicates callback invocation and makes it more difficult to consolidate rcuo callback invocation with existing softirq callback invocation. The introduction of rcuog kthreads should thus be acceptable. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-03-30 02:43:51 +03:00
WARN_ON(signal_pending(current));
trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, TPS("WokeEmpty"));
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
}
/*
* Per-rcu_data kthread, but only for no-CBs CPUs. Repeatedly invoke
* nocb_cb_wait() to do the dirty work.
*/
rcu/nocb: Provide separate no-CBs grace-period kthreads Currently, there is one no-CBs rcuo kthread per CPU, and these kthreads are divided into groups. The first rcuo kthread to come online in a given group is that group's leader, and the leader both waits for grace periods and invokes its CPU's callbacks. The non-leader rcuo kthreads only invoke callbacks. This works well in the real-time/embedded environments for which it was intended because such environments tend not to generate all that many callbacks. However, given huge floods of callbacks, it is possible for the leader kthread to be stuck invoking callbacks while its followers wait helplessly while their callbacks pile up. This is a good recipe for an OOM, and rcutorture's new callback-flood capability does generate such OOMs. One strategy would be to wait until such OOMs start happening in production, but similar OOMs have in fact happened starting in 2018. It would therefore be wise to take a more proactive approach. This commit therefore features per-CPU rcuo kthreads that do nothing but invoke callbacks. Instead of having one of these kthreads act as leader, each group has a separate rcog kthread that handles grace periods for its group. Because these rcuog kthreads do not invoke callbacks, callback floods on one CPU no longer block callbacks from reaching the rcuc callback-invocation kthreads on other CPUs. This change does introduce additional kthreads, however: 1. The number of additional kthreads is about the square root of the number of CPUs, so that a 4096-CPU system would have only about 64 additional kthreads. Note that recent changes decreased the number of rcuo kthreads by a factor of two (CONFIG_PREEMPT=n) or even three (CONFIG_PREEMPT=y), so this still represents a significant improvement on most systems. 2. The leading "rcuo" of the rcuog kthreads should allow existing scripting to affinity these additional kthreads as needed, the same as for the rcuop and rcuos kthreads. (There are no longer any rcuob kthreads.) 3. A state-machine approach was considered and rejected. Although this would allow the rcuo kthreads to continue their dual leader/follower roles, it complicates callback invocation and makes it more difficult to consolidate rcuo callback invocation with existing softirq callback invocation. The introduction of rcuog kthreads should thus be acceptable. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-03-30 02:43:51 +03:00
static int rcu_nocb_cb_kthread(void *arg)
{
struct rcu_data *rdp = arg;
// Each pass through this loop does one callback batch, and,
// if there are no more ready callbacks, waits for them.
for (;;) {
nocb_cb_wait(rdp);
cond_resched_tasks_rcu_qs();
}
return 0;
}
rcu: Break call_rcu() deadlock involving scheduler and perf Dave Jones got the following lockdep splat: > ====================================================== > [ INFO: possible circular locking dependency detected ] > 3.12.0-rc3+ #92 Not tainted > ------------------------------------------------------- > trinity-child2/15191 is trying to acquire lock: > (&rdp->nocb_wq){......}, at: [<ffffffff8108ff43>] __wake_up+0x23/0x50 > > but task is already holding lock: > (&ctx->lock){-.-...}, at: [<ffffffff81154c19>] perf_event_exit_task+0x109/0x230 > > which lock already depends on the new lock. > > > the existing dependency chain (in reverse order) is: > > -> #3 (&ctx->lock){-.-...}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff81733f90>] _raw_spin_lock+0x40/0x80 > [<ffffffff811500ff>] __perf_event_task_sched_out+0x2df/0x5e0 > [<ffffffff81091b83>] perf_event_task_sched_out+0x93/0xa0 > [<ffffffff81732052>] __schedule+0x1d2/0xa20 > [<ffffffff81732f30>] preempt_schedule_irq+0x50/0xb0 > [<ffffffff817352b6>] retint_kernel+0x26/0x30 > [<ffffffff813eed04>] tty_flip_buffer_push+0x34/0x50 > [<ffffffff813f0504>] pty_write+0x54/0x60 > [<ffffffff813e900d>] n_tty_write+0x32d/0x4e0 > [<ffffffff813e5838>] tty_write+0x158/0x2d0 > [<ffffffff811c4850>] vfs_write+0xc0/0x1f0 > [<ffffffff811c52cc>] SyS_write+0x4c/0xa0 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 > > -> #2 (&rq->lock){-.-.-.}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff81733f90>] _raw_spin_lock+0x40/0x80 > [<ffffffff810980b2>] wake_up_new_task+0xc2/0x2e0 > [<ffffffff81054336>] do_fork+0x126/0x460 > [<ffffffff81054696>] kernel_thread+0x26/0x30 > [<ffffffff8171ff93>] rest_init+0x23/0x140 > [<ffffffff81ee1e4b>] start_kernel+0x3f6/0x403 > [<ffffffff81ee1571>] x86_64_start_reservations+0x2a/0x2c > [<ffffffff81ee1664>] x86_64_start_kernel+0xf1/0xf4 > > -> #1 (&p->pi_lock){-.-.-.}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff810979d1>] try_to_wake_up+0x31/0x350 > [<ffffffff81097d62>] default_wake_function+0x12/0x20 > [<ffffffff81084af8>] autoremove_wake_function+0x18/0x40 > [<ffffffff8108ea38>] __wake_up_common+0x58/0x90 > [<ffffffff8108ff59>] __wake_up+0x39/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff81111b8d>] call_rcu+0x1d/0x20 > [<ffffffff81093697>] cpu_attach_domain+0x287/0x360 > [<ffffffff81099d7e>] build_sched_domains+0xe5e/0x10a0 > [<ffffffff81efa7fc>] sched_init_smp+0x3b7/0x47a > [<ffffffff81ee1f4e>] kernel_init_freeable+0xf6/0x202 > [<ffffffff817200be>] kernel_init+0xe/0x190 > [<ffffffff8173d22c>] ret_from_fork+0x7c/0xb0 > > -> #0 (&rdp->nocb_wq){......}: > [<ffffffff810cb7ca>] __lock_acquire+0x191a/0x1be0 > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff8108ff43>] __wake_up+0x23/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff81111bb0>] kfree_call_rcu+0x20/0x30 > [<ffffffff81149abf>] put_ctx+0x4f/0x70 > [<ffffffff81154c3e>] perf_event_exit_task+0x12e/0x230 > [<ffffffff81056b8d>] do_exit+0x30d/0xcc0 > [<ffffffff8105893c>] do_group_exit+0x4c/0xc0 > [<ffffffff810589c4>] SyS_exit_group+0x14/0x20 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 > > other info that might help us debug this: > > Chain exists of: > &rdp->nocb_wq --> &rq->lock --> &ctx->lock > > Possible unsafe locking scenario: > > CPU0 CPU1 > ---- ---- > lock(&ctx->lock); > lock(&rq->lock); > lock(&ctx->lock); > lock(&rdp->nocb_wq); > > *** DEADLOCK *** > > 1 lock held by trinity-child2/15191: > #0: (&ctx->lock){-.-...}, at: [<ffffffff81154c19>] perf_event_exit_task+0x109/0x230 > > stack backtrace: > CPU: 2 PID: 15191 Comm: trinity-child2 Not tainted 3.12.0-rc3+ #92 > ffffffff82565b70 ffff880070c2dbf8 ffffffff8172a363 ffffffff824edf40 > ffff880070c2dc38 ffffffff81726741 ffff880070c2dc90 ffff88022383b1c0 > ffff88022383aac0 0000000000000000 ffff88022383b188 ffff88022383b1c0 > Call Trace: > [<ffffffff8172a363>] dump_stack+0x4e/0x82 > [<ffffffff81726741>] print_circular_bug+0x200/0x20f > [<ffffffff810cb7ca>] __lock_acquire+0x191a/0x1be0 > [<ffffffff810c6439>] ? get_lock_stats+0x19/0x60 > [<ffffffff8100b2f4>] ? native_sched_clock+0x24/0x80 > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8108ff43>] ? __wake_up+0x23/0x50 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff8108ff43>] ? __wake_up+0x23/0x50 > [<ffffffff8108ff43>] __wake_up+0x23/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff8109bc8f>] ? local_clock+0x3f/0x50 > [<ffffffff81111bb0>] kfree_call_rcu+0x20/0x30 > [<ffffffff81149abf>] put_ctx+0x4f/0x70 > [<ffffffff81154c3e>] perf_event_exit_task+0x12e/0x230 > [<ffffffff81056b8d>] do_exit+0x30d/0xcc0 > [<ffffffff810c9af5>] ? trace_hardirqs_on_caller+0x115/0x1e0 > [<ffffffff810c9bcd>] ? trace_hardirqs_on+0xd/0x10 > [<ffffffff8105893c>] do_group_exit+0x4c/0xc0 > [<ffffffff810589c4>] SyS_exit_group+0x14/0x20 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 The underlying problem is that perf is invoking call_rcu() with the scheduler locks held, but in NOCB mode, call_rcu() will with high probability invoke the scheduler -- which just might want to use its locks. The reason that call_rcu() needs to invoke the scheduler is to wake up the corresponding rcuo callback-offload kthread, which does the job of starting up a grace period and invoking the callbacks afterwards. One solution (championed on a related problem by Lai Jiangshan) is to simply defer the wakeup to some point where scheduler locks are no longer held. Since we don't want to unnecessarily incur the cost of such deferral, the task before us is threefold: 1. Determine when it is likely that a relevant scheduler lock is held. 2. Defer the wakeup in such cases. 3. Ensure that all deferred wakeups eventually happen, preferably sooner rather than later. We use irqs_disabled_flags() as a proxy for relevant scheduler locks being held. This works because the relevant locks are always acquired with interrupts disabled. We may defer more often than needed, but that is at least safe. The wakeup deferral is tracked via a new field in the per-CPU and per-RCU-flavor rcu_data structure, namely ->nocb_defer_wakeup. This flag is checked by the RCU core processing. The __rcu_pending() function now checks this flag, which causes rcu_check_callbacks() to initiate RCU core processing at each scheduling-clock interrupt where this flag is set. Of course this is not sufficient because scheduling-clock interrupts are often turned off (the things we used to be able to count on!). So the flags are also checked on entry to any state that RCU considers to be idle, which includes both NO_HZ_IDLE idle state and NO_HZ_FULL user-mode-execution state. This approach should allow call_rcu() to be invoked regardless of what locks you might be holding, the key word being "should". Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org>
2013-10-05 01:33:34 +04:00
/* Is a deferred wakeup of rcu_nocb_kthread() required? */
static int rcu_nocb_need_deferred_wakeup(struct rcu_data *rdp)
rcu: Break call_rcu() deadlock involving scheduler and perf Dave Jones got the following lockdep splat: > ====================================================== > [ INFO: possible circular locking dependency detected ] > 3.12.0-rc3+ #92 Not tainted > ------------------------------------------------------- > trinity-child2/15191 is trying to acquire lock: > (&rdp->nocb_wq){......}, at: [<ffffffff8108ff43>] __wake_up+0x23/0x50 > > but task is already holding lock: > (&ctx->lock){-.-...}, at: [<ffffffff81154c19>] perf_event_exit_task+0x109/0x230 > > which lock already depends on the new lock. > > > the existing dependency chain (in reverse order) is: > > -> #3 (&ctx->lock){-.-...}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff81733f90>] _raw_spin_lock+0x40/0x80 > [<ffffffff811500ff>] __perf_event_task_sched_out+0x2df/0x5e0 > [<ffffffff81091b83>] perf_event_task_sched_out+0x93/0xa0 > [<ffffffff81732052>] __schedule+0x1d2/0xa20 > [<ffffffff81732f30>] preempt_schedule_irq+0x50/0xb0 > [<ffffffff817352b6>] retint_kernel+0x26/0x30 > [<ffffffff813eed04>] tty_flip_buffer_push+0x34/0x50 > [<ffffffff813f0504>] pty_write+0x54/0x60 > [<ffffffff813e900d>] n_tty_write+0x32d/0x4e0 > [<ffffffff813e5838>] tty_write+0x158/0x2d0 > [<ffffffff811c4850>] vfs_write+0xc0/0x1f0 > [<ffffffff811c52cc>] SyS_write+0x4c/0xa0 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 > > -> #2 (&rq->lock){-.-.-.}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff81733f90>] _raw_spin_lock+0x40/0x80 > [<ffffffff810980b2>] wake_up_new_task+0xc2/0x2e0 > [<ffffffff81054336>] do_fork+0x126/0x460 > [<ffffffff81054696>] kernel_thread+0x26/0x30 > [<ffffffff8171ff93>] rest_init+0x23/0x140 > [<ffffffff81ee1e4b>] start_kernel+0x3f6/0x403 > [<ffffffff81ee1571>] x86_64_start_reservations+0x2a/0x2c > [<ffffffff81ee1664>] x86_64_start_kernel+0xf1/0xf4 > > -> #1 (&p->pi_lock){-.-.-.}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff810979d1>] try_to_wake_up+0x31/0x350 > [<ffffffff81097d62>] default_wake_function+0x12/0x20 > [<ffffffff81084af8>] autoremove_wake_function+0x18/0x40 > [<ffffffff8108ea38>] __wake_up_common+0x58/0x90 > [<ffffffff8108ff59>] __wake_up+0x39/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff81111b8d>] call_rcu+0x1d/0x20 > [<ffffffff81093697>] cpu_attach_domain+0x287/0x360 > [<ffffffff81099d7e>] build_sched_domains+0xe5e/0x10a0 > [<ffffffff81efa7fc>] sched_init_smp+0x3b7/0x47a > [<ffffffff81ee1f4e>] kernel_init_freeable+0xf6/0x202 > [<ffffffff817200be>] kernel_init+0xe/0x190 > [<ffffffff8173d22c>] ret_from_fork+0x7c/0xb0 > > -> #0 (&rdp->nocb_wq){......}: > [<ffffffff810cb7ca>] __lock_acquire+0x191a/0x1be0 > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff8108ff43>] __wake_up+0x23/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff81111bb0>] kfree_call_rcu+0x20/0x30 > [<ffffffff81149abf>] put_ctx+0x4f/0x70 > [<ffffffff81154c3e>] perf_event_exit_task+0x12e/0x230 > [<ffffffff81056b8d>] do_exit+0x30d/0xcc0 > [<ffffffff8105893c>] do_group_exit+0x4c/0xc0 > [<ffffffff810589c4>] SyS_exit_group+0x14/0x20 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 > > other info that might help us debug this: > > Chain exists of: > &rdp->nocb_wq --> &rq->lock --> &ctx->lock > > Possible unsafe locking scenario: > > CPU0 CPU1 > ---- ---- > lock(&ctx->lock); > lock(&rq->lock); > lock(&ctx->lock); > lock(&rdp->nocb_wq); > > *** DEADLOCK *** > > 1 lock held by trinity-child2/15191: > #0: (&ctx->lock){-.-...}, at: [<ffffffff81154c19>] perf_event_exit_task+0x109/0x230 > > stack backtrace: > CPU: 2 PID: 15191 Comm: trinity-child2 Not tainted 3.12.0-rc3+ #92 > ffffffff82565b70 ffff880070c2dbf8 ffffffff8172a363 ffffffff824edf40 > ffff880070c2dc38 ffffffff81726741 ffff880070c2dc90 ffff88022383b1c0 > ffff88022383aac0 0000000000000000 ffff88022383b188 ffff88022383b1c0 > Call Trace: > [<ffffffff8172a363>] dump_stack+0x4e/0x82 > [<ffffffff81726741>] print_circular_bug+0x200/0x20f > [<ffffffff810cb7ca>] __lock_acquire+0x191a/0x1be0 > [<ffffffff810c6439>] ? get_lock_stats+0x19/0x60 > [<ffffffff8100b2f4>] ? native_sched_clock+0x24/0x80 > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8108ff43>] ? __wake_up+0x23/0x50 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff8108ff43>] ? __wake_up+0x23/0x50 > [<ffffffff8108ff43>] __wake_up+0x23/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff8109bc8f>] ? local_clock+0x3f/0x50 > [<ffffffff81111bb0>] kfree_call_rcu+0x20/0x30 > [<ffffffff81149abf>] put_ctx+0x4f/0x70 > [<ffffffff81154c3e>] perf_event_exit_task+0x12e/0x230 > [<ffffffff81056b8d>] do_exit+0x30d/0xcc0 > [<ffffffff810c9af5>] ? trace_hardirqs_on_caller+0x115/0x1e0 > [<ffffffff810c9bcd>] ? trace_hardirqs_on+0xd/0x10 > [<ffffffff8105893c>] do_group_exit+0x4c/0xc0 > [<ffffffff810589c4>] SyS_exit_group+0x14/0x20 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 The underlying problem is that perf is invoking call_rcu() with the scheduler locks held, but in NOCB mode, call_rcu() will with high probability invoke the scheduler -- which just might want to use its locks. The reason that call_rcu() needs to invoke the scheduler is to wake up the corresponding rcuo callback-offload kthread, which does the job of starting up a grace period and invoking the callbacks afterwards. One solution (championed on a related problem by Lai Jiangshan) is to simply defer the wakeup to some point where scheduler locks are no longer held. Since we don't want to unnecessarily incur the cost of such deferral, the task before us is threefold: 1. Determine when it is likely that a relevant scheduler lock is held. 2. Defer the wakeup in such cases. 3. Ensure that all deferred wakeups eventually happen, preferably sooner rather than later. We use irqs_disabled_flags() as a proxy for relevant scheduler locks being held. This works because the relevant locks are always acquired with interrupts disabled. We may defer more often than needed, but that is at least safe. The wakeup deferral is tracked via a new field in the per-CPU and per-RCU-flavor rcu_data structure, namely ->nocb_defer_wakeup. This flag is checked by the RCU core processing. The __rcu_pending() function now checks this flag, which causes rcu_check_callbacks() to initiate RCU core processing at each scheduling-clock interrupt where this flag is set. Of course this is not sufficient because scheduling-clock interrupts are often turned off (the things we used to be able to count on!). So the flags are also checked on entry to any state that RCU considers to be idle, which includes both NO_HZ_IDLE idle state and NO_HZ_FULL user-mode-execution state. This approach should allow call_rcu() to be invoked regardless of what locks you might be holding, the key word being "should". Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org>
2013-10-05 01:33:34 +04:00
{
return READ_ONCE(rdp->nocb_defer_wakeup);
rcu: Break call_rcu() deadlock involving scheduler and perf Dave Jones got the following lockdep splat: > ====================================================== > [ INFO: possible circular locking dependency detected ] > 3.12.0-rc3+ #92 Not tainted > ------------------------------------------------------- > trinity-child2/15191 is trying to acquire lock: > (&rdp->nocb_wq){......}, at: [<ffffffff8108ff43>] __wake_up+0x23/0x50 > > but task is already holding lock: > (&ctx->lock){-.-...}, at: [<ffffffff81154c19>] perf_event_exit_task+0x109/0x230 > > which lock already depends on the new lock. > > > the existing dependency chain (in reverse order) is: > > -> #3 (&ctx->lock){-.-...}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff81733f90>] _raw_spin_lock+0x40/0x80 > [<ffffffff811500ff>] __perf_event_task_sched_out+0x2df/0x5e0 > [<ffffffff81091b83>] perf_event_task_sched_out+0x93/0xa0 > [<ffffffff81732052>] __schedule+0x1d2/0xa20 > [<ffffffff81732f30>] preempt_schedule_irq+0x50/0xb0 > [<ffffffff817352b6>] retint_kernel+0x26/0x30 > [<ffffffff813eed04>] tty_flip_buffer_push+0x34/0x50 > [<ffffffff813f0504>] pty_write+0x54/0x60 > [<ffffffff813e900d>] n_tty_write+0x32d/0x4e0 > [<ffffffff813e5838>] tty_write+0x158/0x2d0 > [<ffffffff811c4850>] vfs_write+0xc0/0x1f0 > [<ffffffff811c52cc>] SyS_write+0x4c/0xa0 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 > > -> #2 (&rq->lock){-.-.-.}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff81733f90>] _raw_spin_lock+0x40/0x80 > [<ffffffff810980b2>] wake_up_new_task+0xc2/0x2e0 > [<ffffffff81054336>] do_fork+0x126/0x460 > [<ffffffff81054696>] kernel_thread+0x26/0x30 > [<ffffffff8171ff93>] rest_init+0x23/0x140 > [<ffffffff81ee1e4b>] start_kernel+0x3f6/0x403 > [<ffffffff81ee1571>] x86_64_start_reservations+0x2a/0x2c > [<ffffffff81ee1664>] x86_64_start_kernel+0xf1/0xf4 > > -> #1 (&p->pi_lock){-.-.-.}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff810979d1>] try_to_wake_up+0x31/0x350 > [<ffffffff81097d62>] default_wake_function+0x12/0x20 > [<ffffffff81084af8>] autoremove_wake_function+0x18/0x40 > [<ffffffff8108ea38>] __wake_up_common+0x58/0x90 > [<ffffffff8108ff59>] __wake_up+0x39/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff81111b8d>] call_rcu+0x1d/0x20 > [<ffffffff81093697>] cpu_attach_domain+0x287/0x360 > [<ffffffff81099d7e>] build_sched_domains+0xe5e/0x10a0 > [<ffffffff81efa7fc>] sched_init_smp+0x3b7/0x47a > [<ffffffff81ee1f4e>] kernel_init_freeable+0xf6/0x202 > [<ffffffff817200be>] kernel_init+0xe/0x190 > [<ffffffff8173d22c>] ret_from_fork+0x7c/0xb0 > > -> #0 (&rdp->nocb_wq){......}: > [<ffffffff810cb7ca>] __lock_acquire+0x191a/0x1be0 > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff8108ff43>] __wake_up+0x23/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff81111bb0>] kfree_call_rcu+0x20/0x30 > [<ffffffff81149abf>] put_ctx+0x4f/0x70 > [<ffffffff81154c3e>] perf_event_exit_task+0x12e/0x230 > [<ffffffff81056b8d>] do_exit+0x30d/0xcc0 > [<ffffffff8105893c>] do_group_exit+0x4c/0xc0 > [<ffffffff810589c4>] SyS_exit_group+0x14/0x20 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 > > other info that might help us debug this: > > Chain exists of: > &rdp->nocb_wq --> &rq->lock --> &ctx->lock > > Possible unsafe locking scenario: > > CPU0 CPU1 > ---- ---- > lock(&ctx->lock); > lock(&rq->lock); > lock(&ctx->lock); > lock(&rdp->nocb_wq); > > *** DEADLOCK *** > > 1 lock held by trinity-child2/15191: > #0: (&ctx->lock){-.-...}, at: [<ffffffff81154c19>] perf_event_exit_task+0x109/0x230 > > stack backtrace: > CPU: 2 PID: 15191 Comm: trinity-child2 Not tainted 3.12.0-rc3+ #92 > ffffffff82565b70 ffff880070c2dbf8 ffffffff8172a363 ffffffff824edf40 > ffff880070c2dc38 ffffffff81726741 ffff880070c2dc90 ffff88022383b1c0 > ffff88022383aac0 0000000000000000 ffff88022383b188 ffff88022383b1c0 > Call Trace: > [<ffffffff8172a363>] dump_stack+0x4e/0x82 > [<ffffffff81726741>] print_circular_bug+0x200/0x20f > [<ffffffff810cb7ca>] __lock_acquire+0x191a/0x1be0 > [<ffffffff810c6439>] ? get_lock_stats+0x19/0x60 > [<ffffffff8100b2f4>] ? native_sched_clock+0x24/0x80 > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8108ff43>] ? __wake_up+0x23/0x50 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff8108ff43>] ? __wake_up+0x23/0x50 > [<ffffffff8108ff43>] __wake_up+0x23/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff8109bc8f>] ? local_clock+0x3f/0x50 > [<ffffffff81111bb0>] kfree_call_rcu+0x20/0x30 > [<ffffffff81149abf>] put_ctx+0x4f/0x70 > [<ffffffff81154c3e>] perf_event_exit_task+0x12e/0x230 > [<ffffffff81056b8d>] do_exit+0x30d/0xcc0 > [<ffffffff810c9af5>] ? trace_hardirqs_on_caller+0x115/0x1e0 > [<ffffffff810c9bcd>] ? trace_hardirqs_on+0xd/0x10 > [<ffffffff8105893c>] do_group_exit+0x4c/0xc0 > [<ffffffff810589c4>] SyS_exit_group+0x14/0x20 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 The underlying problem is that perf is invoking call_rcu() with the scheduler locks held, but in NOCB mode, call_rcu() will with high probability invoke the scheduler -- which just might want to use its locks. The reason that call_rcu() needs to invoke the scheduler is to wake up the corresponding rcuo callback-offload kthread, which does the job of starting up a grace period and invoking the callbacks afterwards. One solution (championed on a related problem by Lai Jiangshan) is to simply defer the wakeup to some point where scheduler locks are no longer held. Since we don't want to unnecessarily incur the cost of such deferral, the task before us is threefold: 1. Determine when it is likely that a relevant scheduler lock is held. 2. Defer the wakeup in such cases. 3. Ensure that all deferred wakeups eventually happen, preferably sooner rather than later. We use irqs_disabled_flags() as a proxy for relevant scheduler locks being held. This works because the relevant locks are always acquired with interrupts disabled. We may defer more often than needed, but that is at least safe. The wakeup deferral is tracked via a new field in the per-CPU and per-RCU-flavor rcu_data structure, namely ->nocb_defer_wakeup. This flag is checked by the RCU core processing. The __rcu_pending() function now checks this flag, which causes rcu_check_callbacks() to initiate RCU core processing at each scheduling-clock interrupt where this flag is set. Of course this is not sufficient because scheduling-clock interrupts are often turned off (the things we used to be able to count on!). So the flags are also checked on entry to any state that RCU considers to be idle, which includes both NO_HZ_IDLE idle state and NO_HZ_FULL user-mode-execution state. This approach should allow call_rcu() to be invoked regardless of what locks you might be holding, the key word being "should". Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org>
2013-10-05 01:33:34 +04:00
}
/* Do a deferred wakeup of rcu_nocb_kthread(). */
static void do_nocb_deferred_wakeup_common(struct rcu_data *rdp)
rcu: Break call_rcu() deadlock involving scheduler and perf Dave Jones got the following lockdep splat: > ====================================================== > [ INFO: possible circular locking dependency detected ] > 3.12.0-rc3+ #92 Not tainted > ------------------------------------------------------- > trinity-child2/15191 is trying to acquire lock: > (&rdp->nocb_wq){......}, at: [<ffffffff8108ff43>] __wake_up+0x23/0x50 > > but task is already holding lock: > (&ctx->lock){-.-...}, at: [<ffffffff81154c19>] perf_event_exit_task+0x109/0x230 > > which lock already depends on the new lock. > > > the existing dependency chain (in reverse order) is: > > -> #3 (&ctx->lock){-.-...}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff81733f90>] _raw_spin_lock+0x40/0x80 > [<ffffffff811500ff>] __perf_event_task_sched_out+0x2df/0x5e0 > [<ffffffff81091b83>] perf_event_task_sched_out+0x93/0xa0 > [<ffffffff81732052>] __schedule+0x1d2/0xa20 > [<ffffffff81732f30>] preempt_schedule_irq+0x50/0xb0 > [<ffffffff817352b6>] retint_kernel+0x26/0x30 > [<ffffffff813eed04>] tty_flip_buffer_push+0x34/0x50 > [<ffffffff813f0504>] pty_write+0x54/0x60 > [<ffffffff813e900d>] n_tty_write+0x32d/0x4e0 > [<ffffffff813e5838>] tty_write+0x158/0x2d0 > [<ffffffff811c4850>] vfs_write+0xc0/0x1f0 > [<ffffffff811c52cc>] SyS_write+0x4c/0xa0 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 > > -> #2 (&rq->lock){-.-.-.}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff81733f90>] _raw_spin_lock+0x40/0x80 > [<ffffffff810980b2>] wake_up_new_task+0xc2/0x2e0 > [<ffffffff81054336>] do_fork+0x126/0x460 > [<ffffffff81054696>] kernel_thread+0x26/0x30 > [<ffffffff8171ff93>] rest_init+0x23/0x140 > [<ffffffff81ee1e4b>] start_kernel+0x3f6/0x403 > [<ffffffff81ee1571>] x86_64_start_reservations+0x2a/0x2c > [<ffffffff81ee1664>] x86_64_start_kernel+0xf1/0xf4 > > -> #1 (&p->pi_lock){-.-.-.}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff810979d1>] try_to_wake_up+0x31/0x350 > [<ffffffff81097d62>] default_wake_function+0x12/0x20 > [<ffffffff81084af8>] autoremove_wake_function+0x18/0x40 > [<ffffffff8108ea38>] __wake_up_common+0x58/0x90 > [<ffffffff8108ff59>] __wake_up+0x39/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff81111b8d>] call_rcu+0x1d/0x20 > [<ffffffff81093697>] cpu_attach_domain+0x287/0x360 > [<ffffffff81099d7e>] build_sched_domains+0xe5e/0x10a0 > [<ffffffff81efa7fc>] sched_init_smp+0x3b7/0x47a > [<ffffffff81ee1f4e>] kernel_init_freeable+0xf6/0x202 > [<ffffffff817200be>] kernel_init+0xe/0x190 > [<ffffffff8173d22c>] ret_from_fork+0x7c/0xb0 > > -> #0 (&rdp->nocb_wq){......}: > [<ffffffff810cb7ca>] __lock_acquire+0x191a/0x1be0 > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff8108ff43>] __wake_up+0x23/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff81111bb0>] kfree_call_rcu+0x20/0x30 > [<ffffffff81149abf>] put_ctx+0x4f/0x70 > [<ffffffff81154c3e>] perf_event_exit_task+0x12e/0x230 > [<ffffffff81056b8d>] do_exit+0x30d/0xcc0 > [<ffffffff8105893c>] do_group_exit+0x4c/0xc0 > [<ffffffff810589c4>] SyS_exit_group+0x14/0x20 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 > > other info that might help us debug this: > > Chain exists of: > &rdp->nocb_wq --> &rq->lock --> &ctx->lock > > Possible unsafe locking scenario: > > CPU0 CPU1 > ---- ---- > lock(&ctx->lock); > lock(&rq->lock); > lock(&ctx->lock); > lock(&rdp->nocb_wq); > > *** DEADLOCK *** > > 1 lock held by trinity-child2/15191: > #0: (&ctx->lock){-.-...}, at: [<ffffffff81154c19>] perf_event_exit_task+0x109/0x230 > > stack backtrace: > CPU: 2 PID: 15191 Comm: trinity-child2 Not tainted 3.12.0-rc3+ #92 > ffffffff82565b70 ffff880070c2dbf8 ffffffff8172a363 ffffffff824edf40 > ffff880070c2dc38 ffffffff81726741 ffff880070c2dc90 ffff88022383b1c0 > ffff88022383aac0 0000000000000000 ffff88022383b188 ffff88022383b1c0 > Call Trace: > [<ffffffff8172a363>] dump_stack+0x4e/0x82 > [<ffffffff81726741>] print_circular_bug+0x200/0x20f > [<ffffffff810cb7ca>] __lock_acquire+0x191a/0x1be0 > [<ffffffff810c6439>] ? get_lock_stats+0x19/0x60 > [<ffffffff8100b2f4>] ? native_sched_clock+0x24/0x80 > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8108ff43>] ? __wake_up+0x23/0x50 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff8108ff43>] ? __wake_up+0x23/0x50 > [<ffffffff8108ff43>] __wake_up+0x23/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff8109bc8f>] ? local_clock+0x3f/0x50 > [<ffffffff81111bb0>] kfree_call_rcu+0x20/0x30 > [<ffffffff81149abf>] put_ctx+0x4f/0x70 > [<ffffffff81154c3e>] perf_event_exit_task+0x12e/0x230 > [<ffffffff81056b8d>] do_exit+0x30d/0xcc0 > [<ffffffff810c9af5>] ? trace_hardirqs_on_caller+0x115/0x1e0 > [<ffffffff810c9bcd>] ? trace_hardirqs_on+0xd/0x10 > [<ffffffff8105893c>] do_group_exit+0x4c/0xc0 > [<ffffffff810589c4>] SyS_exit_group+0x14/0x20 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 The underlying problem is that perf is invoking call_rcu() with the scheduler locks held, but in NOCB mode, call_rcu() will with high probability invoke the scheduler -- which just might want to use its locks. The reason that call_rcu() needs to invoke the scheduler is to wake up the corresponding rcuo callback-offload kthread, which does the job of starting up a grace period and invoking the callbacks afterwards. One solution (championed on a related problem by Lai Jiangshan) is to simply defer the wakeup to some point where scheduler locks are no longer held. Since we don't want to unnecessarily incur the cost of such deferral, the task before us is threefold: 1. Determine when it is likely that a relevant scheduler lock is held. 2. Defer the wakeup in such cases. 3. Ensure that all deferred wakeups eventually happen, preferably sooner rather than later. We use irqs_disabled_flags() as a proxy for relevant scheduler locks being held. This works because the relevant locks are always acquired with interrupts disabled. We may defer more often than needed, but that is at least safe. The wakeup deferral is tracked via a new field in the per-CPU and per-RCU-flavor rcu_data structure, namely ->nocb_defer_wakeup. This flag is checked by the RCU core processing. The __rcu_pending() function now checks this flag, which causes rcu_check_callbacks() to initiate RCU core processing at each scheduling-clock interrupt where this flag is set. Of course this is not sufficient because scheduling-clock interrupts are often turned off (the things we used to be able to count on!). So the flags are also checked on entry to any state that RCU considers to be idle, which includes both NO_HZ_IDLE idle state and NO_HZ_FULL user-mode-execution state. This approach should allow call_rcu() to be invoked regardless of what locks you might be holding, the key word being "should". Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org>
2013-10-05 01:33:34 +04:00
{
unsigned long flags;
int ndw;
rcu_nocb_lock_irqsave(rdp, flags);
if (!rcu_nocb_need_deferred_wakeup(rdp)) {
rcu_nocb_unlock_irqrestore(rdp, flags);
rcu: Break call_rcu() deadlock involving scheduler and perf Dave Jones got the following lockdep splat: > ====================================================== > [ INFO: possible circular locking dependency detected ] > 3.12.0-rc3+ #92 Not tainted > ------------------------------------------------------- > trinity-child2/15191 is trying to acquire lock: > (&rdp->nocb_wq){......}, at: [<ffffffff8108ff43>] __wake_up+0x23/0x50 > > but task is already holding lock: > (&ctx->lock){-.-...}, at: [<ffffffff81154c19>] perf_event_exit_task+0x109/0x230 > > which lock already depends on the new lock. > > > the existing dependency chain (in reverse order) is: > > -> #3 (&ctx->lock){-.-...}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff81733f90>] _raw_spin_lock+0x40/0x80 > [<ffffffff811500ff>] __perf_event_task_sched_out+0x2df/0x5e0 > [<ffffffff81091b83>] perf_event_task_sched_out+0x93/0xa0 > [<ffffffff81732052>] __schedule+0x1d2/0xa20 > [<ffffffff81732f30>] preempt_schedule_irq+0x50/0xb0 > [<ffffffff817352b6>] retint_kernel+0x26/0x30 > [<ffffffff813eed04>] tty_flip_buffer_push+0x34/0x50 > [<ffffffff813f0504>] pty_write+0x54/0x60 > [<ffffffff813e900d>] n_tty_write+0x32d/0x4e0 > [<ffffffff813e5838>] tty_write+0x158/0x2d0 > [<ffffffff811c4850>] vfs_write+0xc0/0x1f0 > [<ffffffff811c52cc>] SyS_write+0x4c/0xa0 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 > > -> #2 (&rq->lock){-.-.-.}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff81733f90>] _raw_spin_lock+0x40/0x80 > [<ffffffff810980b2>] wake_up_new_task+0xc2/0x2e0 > [<ffffffff81054336>] do_fork+0x126/0x460 > [<ffffffff81054696>] kernel_thread+0x26/0x30 > [<ffffffff8171ff93>] rest_init+0x23/0x140 > [<ffffffff81ee1e4b>] start_kernel+0x3f6/0x403 > [<ffffffff81ee1571>] x86_64_start_reservations+0x2a/0x2c > [<ffffffff81ee1664>] x86_64_start_kernel+0xf1/0xf4 > > -> #1 (&p->pi_lock){-.-.-.}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff810979d1>] try_to_wake_up+0x31/0x350 > [<ffffffff81097d62>] default_wake_function+0x12/0x20 > [<ffffffff81084af8>] autoremove_wake_function+0x18/0x40 > [<ffffffff8108ea38>] __wake_up_common+0x58/0x90 > [<ffffffff8108ff59>] __wake_up+0x39/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff81111b8d>] call_rcu+0x1d/0x20 > [<ffffffff81093697>] cpu_attach_domain+0x287/0x360 > [<ffffffff81099d7e>] build_sched_domains+0xe5e/0x10a0 > [<ffffffff81efa7fc>] sched_init_smp+0x3b7/0x47a > [<ffffffff81ee1f4e>] kernel_init_freeable+0xf6/0x202 > [<ffffffff817200be>] kernel_init+0xe/0x190 > [<ffffffff8173d22c>] ret_from_fork+0x7c/0xb0 > > -> #0 (&rdp->nocb_wq){......}: > [<ffffffff810cb7ca>] __lock_acquire+0x191a/0x1be0 > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff8108ff43>] __wake_up+0x23/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff81111bb0>] kfree_call_rcu+0x20/0x30 > [<ffffffff81149abf>] put_ctx+0x4f/0x70 > [<ffffffff81154c3e>] perf_event_exit_task+0x12e/0x230 > [<ffffffff81056b8d>] do_exit+0x30d/0xcc0 > [<ffffffff8105893c>] do_group_exit+0x4c/0xc0 > [<ffffffff810589c4>] SyS_exit_group+0x14/0x20 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 > > other info that might help us debug this: > > Chain exists of: > &rdp->nocb_wq --> &rq->lock --> &ctx->lock > > Possible unsafe locking scenario: > > CPU0 CPU1 > ---- ---- > lock(&ctx->lock); > lock(&rq->lock); > lock(&ctx->lock); > lock(&rdp->nocb_wq); > > *** DEADLOCK *** > > 1 lock held by trinity-child2/15191: > #0: (&ctx->lock){-.-...}, at: [<ffffffff81154c19>] perf_event_exit_task+0x109/0x230 > > stack backtrace: > CPU: 2 PID: 15191 Comm: trinity-child2 Not tainted 3.12.0-rc3+ #92 > ffffffff82565b70 ffff880070c2dbf8 ffffffff8172a363 ffffffff824edf40 > ffff880070c2dc38 ffffffff81726741 ffff880070c2dc90 ffff88022383b1c0 > ffff88022383aac0 0000000000000000 ffff88022383b188 ffff88022383b1c0 > Call Trace: > [<ffffffff8172a363>] dump_stack+0x4e/0x82 > [<ffffffff81726741>] print_circular_bug+0x200/0x20f > [<ffffffff810cb7ca>] __lock_acquire+0x191a/0x1be0 > [<ffffffff810c6439>] ? get_lock_stats+0x19/0x60 > [<ffffffff8100b2f4>] ? native_sched_clock+0x24/0x80 > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8108ff43>] ? __wake_up+0x23/0x50 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff8108ff43>] ? __wake_up+0x23/0x50 > [<ffffffff8108ff43>] __wake_up+0x23/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff8109bc8f>] ? local_clock+0x3f/0x50 > [<ffffffff81111bb0>] kfree_call_rcu+0x20/0x30 > [<ffffffff81149abf>] put_ctx+0x4f/0x70 > [<ffffffff81154c3e>] perf_event_exit_task+0x12e/0x230 > [<ffffffff81056b8d>] do_exit+0x30d/0xcc0 > [<ffffffff810c9af5>] ? trace_hardirqs_on_caller+0x115/0x1e0 > [<ffffffff810c9bcd>] ? trace_hardirqs_on+0xd/0x10 > [<ffffffff8105893c>] do_group_exit+0x4c/0xc0 > [<ffffffff810589c4>] SyS_exit_group+0x14/0x20 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 The underlying problem is that perf is invoking call_rcu() with the scheduler locks held, but in NOCB mode, call_rcu() will with high probability invoke the scheduler -- which just might want to use its locks. The reason that call_rcu() needs to invoke the scheduler is to wake up the corresponding rcuo callback-offload kthread, which does the job of starting up a grace period and invoking the callbacks afterwards. One solution (championed on a related problem by Lai Jiangshan) is to simply defer the wakeup to some point where scheduler locks are no longer held. Since we don't want to unnecessarily incur the cost of such deferral, the task before us is threefold: 1. Determine when it is likely that a relevant scheduler lock is held. 2. Defer the wakeup in such cases. 3. Ensure that all deferred wakeups eventually happen, preferably sooner rather than later. We use irqs_disabled_flags() as a proxy for relevant scheduler locks being held. This works because the relevant locks are always acquired with interrupts disabled. We may defer more often than needed, but that is at least safe. The wakeup deferral is tracked via a new field in the per-CPU and per-RCU-flavor rcu_data structure, namely ->nocb_defer_wakeup. This flag is checked by the RCU core processing. The __rcu_pending() function now checks this flag, which causes rcu_check_callbacks() to initiate RCU core processing at each scheduling-clock interrupt where this flag is set. Of course this is not sufficient because scheduling-clock interrupts are often turned off (the things we used to be able to count on!). So the flags are also checked on entry to any state that RCU considers to be idle, which includes both NO_HZ_IDLE idle state and NO_HZ_FULL user-mode-execution state. This approach should allow call_rcu() to be invoked regardless of what locks you might be holding, the key word being "should". Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org>
2013-10-05 01:33:34 +04:00
return;
}
ndw = READ_ONCE(rdp->nocb_defer_wakeup);
WRITE_ONCE(rdp->nocb_defer_wakeup, RCU_NOCB_WAKE_NOT);
wake_nocb_gp(rdp, ndw == RCU_NOCB_WAKE_FORCE, flags);
trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, TPS("DeferredWake"));
rcu: Break call_rcu() deadlock involving scheduler and perf Dave Jones got the following lockdep splat: > ====================================================== > [ INFO: possible circular locking dependency detected ] > 3.12.0-rc3+ #92 Not tainted > ------------------------------------------------------- > trinity-child2/15191 is trying to acquire lock: > (&rdp->nocb_wq){......}, at: [<ffffffff8108ff43>] __wake_up+0x23/0x50 > > but task is already holding lock: > (&ctx->lock){-.-...}, at: [<ffffffff81154c19>] perf_event_exit_task+0x109/0x230 > > which lock already depends on the new lock. > > > the existing dependency chain (in reverse order) is: > > -> #3 (&ctx->lock){-.-...}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff81733f90>] _raw_spin_lock+0x40/0x80 > [<ffffffff811500ff>] __perf_event_task_sched_out+0x2df/0x5e0 > [<ffffffff81091b83>] perf_event_task_sched_out+0x93/0xa0 > [<ffffffff81732052>] __schedule+0x1d2/0xa20 > [<ffffffff81732f30>] preempt_schedule_irq+0x50/0xb0 > [<ffffffff817352b6>] retint_kernel+0x26/0x30 > [<ffffffff813eed04>] tty_flip_buffer_push+0x34/0x50 > [<ffffffff813f0504>] pty_write+0x54/0x60 > [<ffffffff813e900d>] n_tty_write+0x32d/0x4e0 > [<ffffffff813e5838>] tty_write+0x158/0x2d0 > [<ffffffff811c4850>] vfs_write+0xc0/0x1f0 > [<ffffffff811c52cc>] SyS_write+0x4c/0xa0 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 > > -> #2 (&rq->lock){-.-.-.}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff81733f90>] _raw_spin_lock+0x40/0x80 > [<ffffffff810980b2>] wake_up_new_task+0xc2/0x2e0 > [<ffffffff81054336>] do_fork+0x126/0x460 > [<ffffffff81054696>] kernel_thread+0x26/0x30 > [<ffffffff8171ff93>] rest_init+0x23/0x140 > [<ffffffff81ee1e4b>] start_kernel+0x3f6/0x403 > [<ffffffff81ee1571>] x86_64_start_reservations+0x2a/0x2c > [<ffffffff81ee1664>] x86_64_start_kernel+0xf1/0xf4 > > -> #1 (&p->pi_lock){-.-.-.}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff810979d1>] try_to_wake_up+0x31/0x350 > [<ffffffff81097d62>] default_wake_function+0x12/0x20 > [<ffffffff81084af8>] autoremove_wake_function+0x18/0x40 > [<ffffffff8108ea38>] __wake_up_common+0x58/0x90 > [<ffffffff8108ff59>] __wake_up+0x39/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff81111b8d>] call_rcu+0x1d/0x20 > [<ffffffff81093697>] cpu_attach_domain+0x287/0x360 > [<ffffffff81099d7e>] build_sched_domains+0xe5e/0x10a0 > [<ffffffff81efa7fc>] sched_init_smp+0x3b7/0x47a > [<ffffffff81ee1f4e>] kernel_init_freeable+0xf6/0x202 > [<ffffffff817200be>] kernel_init+0xe/0x190 > [<ffffffff8173d22c>] ret_from_fork+0x7c/0xb0 > > -> #0 (&rdp->nocb_wq){......}: > [<ffffffff810cb7ca>] __lock_acquire+0x191a/0x1be0 > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff8108ff43>] __wake_up+0x23/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff81111bb0>] kfree_call_rcu+0x20/0x30 > [<ffffffff81149abf>] put_ctx+0x4f/0x70 > [<ffffffff81154c3e>] perf_event_exit_task+0x12e/0x230 > [<ffffffff81056b8d>] do_exit+0x30d/0xcc0 > [<ffffffff8105893c>] do_group_exit+0x4c/0xc0 > [<ffffffff810589c4>] SyS_exit_group+0x14/0x20 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 > > other info that might help us debug this: > > Chain exists of: > &rdp->nocb_wq --> &rq->lock --> &ctx->lock > > Possible unsafe locking scenario: > > CPU0 CPU1 > ---- ---- > lock(&ctx->lock); > lock(&rq->lock); > lock(&ctx->lock); > lock(&rdp->nocb_wq); > > *** DEADLOCK *** > > 1 lock held by trinity-child2/15191: > #0: (&ctx->lock){-.-...}, at: [<ffffffff81154c19>] perf_event_exit_task+0x109/0x230 > > stack backtrace: > CPU: 2 PID: 15191 Comm: trinity-child2 Not tainted 3.12.0-rc3+ #92 > ffffffff82565b70 ffff880070c2dbf8 ffffffff8172a363 ffffffff824edf40 > ffff880070c2dc38 ffffffff81726741 ffff880070c2dc90 ffff88022383b1c0 > ffff88022383aac0 0000000000000000 ffff88022383b188 ffff88022383b1c0 > Call Trace: > [<ffffffff8172a363>] dump_stack+0x4e/0x82 > [<ffffffff81726741>] print_circular_bug+0x200/0x20f > [<ffffffff810cb7ca>] __lock_acquire+0x191a/0x1be0 > [<ffffffff810c6439>] ? get_lock_stats+0x19/0x60 > [<ffffffff8100b2f4>] ? native_sched_clock+0x24/0x80 > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8108ff43>] ? __wake_up+0x23/0x50 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff8108ff43>] ? __wake_up+0x23/0x50 > [<ffffffff8108ff43>] __wake_up+0x23/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff8109bc8f>] ? local_clock+0x3f/0x50 > [<ffffffff81111bb0>] kfree_call_rcu+0x20/0x30 > [<ffffffff81149abf>] put_ctx+0x4f/0x70 > [<ffffffff81154c3e>] perf_event_exit_task+0x12e/0x230 > [<ffffffff81056b8d>] do_exit+0x30d/0xcc0 > [<ffffffff810c9af5>] ? trace_hardirqs_on_caller+0x115/0x1e0 > [<ffffffff810c9bcd>] ? trace_hardirqs_on+0xd/0x10 > [<ffffffff8105893c>] do_group_exit+0x4c/0xc0 > [<ffffffff810589c4>] SyS_exit_group+0x14/0x20 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 The underlying problem is that perf is invoking call_rcu() with the scheduler locks held, but in NOCB mode, call_rcu() will with high probability invoke the scheduler -- which just might want to use its locks. The reason that call_rcu() needs to invoke the scheduler is to wake up the corresponding rcuo callback-offload kthread, which does the job of starting up a grace period and invoking the callbacks afterwards. One solution (championed on a related problem by Lai Jiangshan) is to simply defer the wakeup to some point where scheduler locks are no longer held. Since we don't want to unnecessarily incur the cost of such deferral, the task before us is threefold: 1. Determine when it is likely that a relevant scheduler lock is held. 2. Defer the wakeup in such cases. 3. Ensure that all deferred wakeups eventually happen, preferably sooner rather than later. We use irqs_disabled_flags() as a proxy for relevant scheduler locks being held. This works because the relevant locks are always acquired with interrupts disabled. We may defer more often than needed, but that is at least safe. The wakeup deferral is tracked via a new field in the per-CPU and per-RCU-flavor rcu_data structure, namely ->nocb_defer_wakeup. This flag is checked by the RCU core processing. The __rcu_pending() function now checks this flag, which causes rcu_check_callbacks() to initiate RCU core processing at each scheduling-clock interrupt where this flag is set. Of course this is not sufficient because scheduling-clock interrupts are often turned off (the things we used to be able to count on!). So the flags are also checked on entry to any state that RCU considers to be idle, which includes both NO_HZ_IDLE idle state and NO_HZ_FULL user-mode-execution state. This approach should allow call_rcu() to be invoked regardless of what locks you might be holding, the key word being "should". Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org>
2013-10-05 01:33:34 +04:00
}
/* Do a deferred wakeup of rcu_nocb_kthread() from a timer handler. */
static void do_nocb_deferred_wakeup_timer(struct timer_list *t)
{
struct rcu_data *rdp = from_timer(rdp, t, nocb_timer);
do_nocb_deferred_wakeup_common(rdp);
}
/*
* Do a deferred wakeup of rcu_nocb_kthread() from fastpath.
* This means we do an inexact common-case check. Note that if
* we miss, ->nocb_timer will eventually clean things up.
*/
static void do_nocb_deferred_wakeup(struct rcu_data *rdp)
{
if (rcu_nocb_need_deferred_wakeup(rdp))
do_nocb_deferred_wakeup_common(rdp);
}
void __init rcu_init_nohz(void)
{
int cpu;
bool need_rcu_nocb_mask = false;
struct rcu_data *rdp;
#if defined(CONFIG_NO_HZ_FULL)
if (tick_nohz_full_running && cpumask_weight(tick_nohz_full_mask))
need_rcu_nocb_mask = true;
#endif /* #if defined(CONFIG_NO_HZ_FULL) */
if (!cpumask_available(rcu_nocb_mask) && need_rcu_nocb_mask) {
if (!zalloc_cpumask_var(&rcu_nocb_mask, GFP_KERNEL)) {
pr_info("rcu_nocb_mask allocation failed, callback offloading disabled.\n");
return;
}
}
if (!cpumask_available(rcu_nocb_mask))
return;
#if defined(CONFIG_NO_HZ_FULL)
if (tick_nohz_full_running)
cpumask_or(rcu_nocb_mask, rcu_nocb_mask, tick_nohz_full_mask);
#endif /* #if defined(CONFIG_NO_HZ_FULL) */
if (!cpumask_subset(rcu_nocb_mask, cpu_possible_mask)) {
pr_info("\tNote: kernel parameter 'rcu_nocbs=', 'nohz_full', or 'isolcpus=' contains nonexistent CPUs.\n");
cpumask_and(rcu_nocb_mask, cpu_possible_mask,
rcu_nocb_mask);
}
if (cpumask_empty(rcu_nocb_mask))
pr_info("\tOffload RCU callbacks from CPUs: (none).\n");
else
pr_info("\tOffload RCU callbacks from CPUs: %*pbl.\n",
cpumask_pr_args(rcu_nocb_mask));
if (rcu_nocb_poll)
pr_info("\tPoll for callbacks from no-CBs CPUs.\n");
for_each_cpu(cpu, rcu_nocb_mask) {
rdp = per_cpu_ptr(&rcu_data, cpu);
if (rcu_segcblist_empty(&rdp->cblist))
rcu_segcblist_init(&rdp->cblist);
rcu_segcblist_offload(&rdp->cblist);
}
rcu_organize_nocb_kthreads();
rcu: Break call_rcu() deadlock involving scheduler and perf Dave Jones got the following lockdep splat: > ====================================================== > [ INFO: possible circular locking dependency detected ] > 3.12.0-rc3+ #92 Not tainted > ------------------------------------------------------- > trinity-child2/15191 is trying to acquire lock: > (&rdp->nocb_wq){......}, at: [<ffffffff8108ff43>] __wake_up+0x23/0x50 > > but task is already holding lock: > (&ctx->lock){-.-...}, at: [<ffffffff81154c19>] perf_event_exit_task+0x109/0x230 > > which lock already depends on the new lock. > > > the existing dependency chain (in reverse order) is: > > -> #3 (&ctx->lock){-.-...}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff81733f90>] _raw_spin_lock+0x40/0x80 > [<ffffffff811500ff>] __perf_event_task_sched_out+0x2df/0x5e0 > [<ffffffff81091b83>] perf_event_task_sched_out+0x93/0xa0 > [<ffffffff81732052>] __schedule+0x1d2/0xa20 > [<ffffffff81732f30>] preempt_schedule_irq+0x50/0xb0 > [<ffffffff817352b6>] retint_kernel+0x26/0x30 > [<ffffffff813eed04>] tty_flip_buffer_push+0x34/0x50 > [<ffffffff813f0504>] pty_write+0x54/0x60 > [<ffffffff813e900d>] n_tty_write+0x32d/0x4e0 > [<ffffffff813e5838>] tty_write+0x158/0x2d0 > [<ffffffff811c4850>] vfs_write+0xc0/0x1f0 > [<ffffffff811c52cc>] SyS_write+0x4c/0xa0 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 > > -> #2 (&rq->lock){-.-.-.}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff81733f90>] _raw_spin_lock+0x40/0x80 > [<ffffffff810980b2>] wake_up_new_task+0xc2/0x2e0 > [<ffffffff81054336>] do_fork+0x126/0x460 > [<ffffffff81054696>] kernel_thread+0x26/0x30 > [<ffffffff8171ff93>] rest_init+0x23/0x140 > [<ffffffff81ee1e4b>] start_kernel+0x3f6/0x403 > [<ffffffff81ee1571>] x86_64_start_reservations+0x2a/0x2c > [<ffffffff81ee1664>] x86_64_start_kernel+0xf1/0xf4 > > -> #1 (&p->pi_lock){-.-.-.}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff810979d1>] try_to_wake_up+0x31/0x350 > [<ffffffff81097d62>] default_wake_function+0x12/0x20 > [<ffffffff81084af8>] autoremove_wake_function+0x18/0x40 > [<ffffffff8108ea38>] __wake_up_common+0x58/0x90 > [<ffffffff8108ff59>] __wake_up+0x39/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff81111b8d>] call_rcu+0x1d/0x20 > [<ffffffff81093697>] cpu_attach_domain+0x287/0x360 > [<ffffffff81099d7e>] build_sched_domains+0xe5e/0x10a0 > [<ffffffff81efa7fc>] sched_init_smp+0x3b7/0x47a > [<ffffffff81ee1f4e>] kernel_init_freeable+0xf6/0x202 > [<ffffffff817200be>] kernel_init+0xe/0x190 > [<ffffffff8173d22c>] ret_from_fork+0x7c/0xb0 > > -> #0 (&rdp->nocb_wq){......}: > [<ffffffff810cb7ca>] __lock_acquire+0x191a/0x1be0 > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff8108ff43>] __wake_up+0x23/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff81111bb0>] kfree_call_rcu+0x20/0x30 > [<ffffffff81149abf>] put_ctx+0x4f/0x70 > [<ffffffff81154c3e>] perf_event_exit_task+0x12e/0x230 > [<ffffffff81056b8d>] do_exit+0x30d/0xcc0 > [<ffffffff8105893c>] do_group_exit+0x4c/0xc0 > [<ffffffff810589c4>] SyS_exit_group+0x14/0x20 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 > > other info that might help us debug this: > > Chain exists of: > &rdp->nocb_wq --> &rq->lock --> &ctx->lock > > Possible unsafe locking scenario: > > CPU0 CPU1 > ---- ---- > lock(&ctx->lock); > lock(&rq->lock); > lock(&ctx->lock); > lock(&rdp->nocb_wq); > > *** DEADLOCK *** > > 1 lock held by trinity-child2/15191: > #0: (&ctx->lock){-.-...}, at: [<ffffffff81154c19>] perf_event_exit_task+0x109/0x230 > > stack backtrace: > CPU: 2 PID: 15191 Comm: trinity-child2 Not tainted 3.12.0-rc3+ #92 > ffffffff82565b70 ffff880070c2dbf8 ffffffff8172a363 ffffffff824edf40 > ffff880070c2dc38 ffffffff81726741 ffff880070c2dc90 ffff88022383b1c0 > ffff88022383aac0 0000000000000000 ffff88022383b188 ffff88022383b1c0 > Call Trace: > [<ffffffff8172a363>] dump_stack+0x4e/0x82 > [<ffffffff81726741>] print_circular_bug+0x200/0x20f > [<ffffffff810cb7ca>] __lock_acquire+0x191a/0x1be0 > [<ffffffff810c6439>] ? get_lock_stats+0x19/0x60 > [<ffffffff8100b2f4>] ? native_sched_clock+0x24/0x80 > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8108ff43>] ? __wake_up+0x23/0x50 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff8108ff43>] ? __wake_up+0x23/0x50 > [<ffffffff8108ff43>] __wake_up+0x23/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff8109bc8f>] ? local_clock+0x3f/0x50 > [<ffffffff81111bb0>] kfree_call_rcu+0x20/0x30 > [<ffffffff81149abf>] put_ctx+0x4f/0x70 > [<ffffffff81154c3e>] perf_event_exit_task+0x12e/0x230 > [<ffffffff81056b8d>] do_exit+0x30d/0xcc0 > [<ffffffff810c9af5>] ? trace_hardirqs_on_caller+0x115/0x1e0 > [<ffffffff810c9bcd>] ? trace_hardirqs_on+0xd/0x10 > [<ffffffff8105893c>] do_group_exit+0x4c/0xc0 > [<ffffffff810589c4>] SyS_exit_group+0x14/0x20 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 The underlying problem is that perf is invoking call_rcu() with the scheduler locks held, but in NOCB mode, call_rcu() will with high probability invoke the scheduler -- which just might want to use its locks. The reason that call_rcu() needs to invoke the scheduler is to wake up the corresponding rcuo callback-offload kthread, which does the job of starting up a grace period and invoking the callbacks afterwards. One solution (championed on a related problem by Lai Jiangshan) is to simply defer the wakeup to some point where scheduler locks are no longer held. Since we don't want to unnecessarily incur the cost of such deferral, the task before us is threefold: 1. Determine when it is likely that a relevant scheduler lock is held. 2. Defer the wakeup in such cases. 3. Ensure that all deferred wakeups eventually happen, preferably sooner rather than later. We use irqs_disabled_flags() as a proxy for relevant scheduler locks being held. This works because the relevant locks are always acquired with interrupts disabled. We may defer more often than needed, but that is at least safe. The wakeup deferral is tracked via a new field in the per-CPU and per-RCU-flavor rcu_data structure, namely ->nocb_defer_wakeup. This flag is checked by the RCU core processing. The __rcu_pending() function now checks this flag, which causes rcu_check_callbacks() to initiate RCU core processing at each scheduling-clock interrupt where this flag is set. Of course this is not sufficient because scheduling-clock interrupts are often turned off (the things we used to be able to count on!). So the flags are also checked on entry to any state that RCU considers to be idle, which includes both NO_HZ_IDLE idle state and NO_HZ_FULL user-mode-execution state. This approach should allow call_rcu() to be invoked regardless of what locks you might be holding, the key word being "should". Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org>
2013-10-05 01:33:34 +04:00
}
/* Initialize per-rcu_data variables for no-CBs CPUs. */
static void __init rcu_boot_init_nocb_percpu_data(struct rcu_data *rdp)
{
rcu/nocb: Provide separate no-CBs grace-period kthreads Currently, there is one no-CBs rcuo kthread per CPU, and these kthreads are divided into groups. The first rcuo kthread to come online in a given group is that group's leader, and the leader both waits for grace periods and invokes its CPU's callbacks. The non-leader rcuo kthreads only invoke callbacks. This works well in the real-time/embedded environments for which it was intended because such environments tend not to generate all that many callbacks. However, given huge floods of callbacks, it is possible for the leader kthread to be stuck invoking callbacks while its followers wait helplessly while their callbacks pile up. This is a good recipe for an OOM, and rcutorture's new callback-flood capability does generate such OOMs. One strategy would be to wait until such OOMs start happening in production, but similar OOMs have in fact happened starting in 2018. It would therefore be wise to take a more proactive approach. This commit therefore features per-CPU rcuo kthreads that do nothing but invoke callbacks. Instead of having one of these kthreads act as leader, each group has a separate rcog kthread that handles grace periods for its group. Because these rcuog kthreads do not invoke callbacks, callback floods on one CPU no longer block callbacks from reaching the rcuc callback-invocation kthreads on other CPUs. This change does introduce additional kthreads, however: 1. The number of additional kthreads is about the square root of the number of CPUs, so that a 4096-CPU system would have only about 64 additional kthreads. Note that recent changes decreased the number of rcuo kthreads by a factor of two (CONFIG_PREEMPT=n) or even three (CONFIG_PREEMPT=y), so this still represents a significant improvement on most systems. 2. The leading "rcuo" of the rcuog kthreads should allow existing scripting to affinity these additional kthreads as needed, the same as for the rcuop and rcuos kthreads. (There are no longer any rcuob kthreads.) 3. A state-machine approach was considered and rejected. Although this would allow the rcuo kthreads to continue their dual leader/follower roles, it complicates callback invocation and makes it more difficult to consolidate rcuo callback invocation with existing softirq callback invocation. The introduction of rcuog kthreads should thus be acceptable. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-03-30 02:43:51 +03:00
init_swait_queue_head(&rdp->nocb_cb_wq);
init_swait_queue_head(&rdp->nocb_gp_wq);
raw_spin_lock_init(&rdp->nocb_lock);
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
raw_spin_lock_init(&rdp->nocb_bypass_lock);
raw_spin_lock_init(&rdp->nocb_gp_lock);
timer_setup(&rdp->nocb_timer, do_nocb_deferred_wakeup_timer, 0);
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
timer_setup(&rdp->nocb_bypass_timer, do_nocb_bypass_wakeup_timer, 0);
rcu_cblist_init(&rdp->nocb_bypass);
}
/*
* If the specified CPU is a no-CBs CPU that does not already have its
rcu/nocb: Provide separate no-CBs grace-period kthreads Currently, there is one no-CBs rcuo kthread per CPU, and these kthreads are divided into groups. The first rcuo kthread to come online in a given group is that group's leader, and the leader both waits for grace periods and invokes its CPU's callbacks. The non-leader rcuo kthreads only invoke callbacks. This works well in the real-time/embedded environments for which it was intended because such environments tend not to generate all that many callbacks. However, given huge floods of callbacks, it is possible for the leader kthread to be stuck invoking callbacks while its followers wait helplessly while their callbacks pile up. This is a good recipe for an OOM, and rcutorture's new callback-flood capability does generate such OOMs. One strategy would be to wait until such OOMs start happening in production, but similar OOMs have in fact happened starting in 2018. It would therefore be wise to take a more proactive approach. This commit therefore features per-CPU rcuo kthreads that do nothing but invoke callbacks. Instead of having one of these kthreads act as leader, each group has a separate rcog kthread that handles grace periods for its group. Because these rcuog kthreads do not invoke callbacks, callback floods on one CPU no longer block callbacks from reaching the rcuc callback-invocation kthreads on other CPUs. This change does introduce additional kthreads, however: 1. The number of additional kthreads is about the square root of the number of CPUs, so that a 4096-CPU system would have only about 64 additional kthreads. Note that recent changes decreased the number of rcuo kthreads by a factor of two (CONFIG_PREEMPT=n) or even three (CONFIG_PREEMPT=y), so this still represents a significant improvement on most systems. 2. The leading "rcuo" of the rcuog kthreads should allow existing scripting to affinity these additional kthreads as needed, the same as for the rcuop and rcuos kthreads. (There are no longer any rcuob kthreads.) 3. A state-machine approach was considered and rejected. Although this would allow the rcuo kthreads to continue their dual leader/follower roles, it complicates callback invocation and makes it more difficult to consolidate rcuo callback invocation with existing softirq callback invocation. The introduction of rcuog kthreads should thus be acceptable. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-03-30 02:43:51 +03:00
* rcuo CB kthread, spawn it. Additionally, if the rcuo GP kthread
* for this CPU's group has not yet been created, spawn it as well.
*/
static void rcu_spawn_one_nocb_kthread(int cpu)
{
rcu/nocb: Provide separate no-CBs grace-period kthreads Currently, there is one no-CBs rcuo kthread per CPU, and these kthreads are divided into groups. The first rcuo kthread to come online in a given group is that group's leader, and the leader both waits for grace periods and invokes its CPU's callbacks. The non-leader rcuo kthreads only invoke callbacks. This works well in the real-time/embedded environments for which it was intended because such environments tend not to generate all that many callbacks. However, given huge floods of callbacks, it is possible for the leader kthread to be stuck invoking callbacks while its followers wait helplessly while their callbacks pile up. This is a good recipe for an OOM, and rcutorture's new callback-flood capability does generate such OOMs. One strategy would be to wait until such OOMs start happening in production, but similar OOMs have in fact happened starting in 2018. It would therefore be wise to take a more proactive approach. This commit therefore features per-CPU rcuo kthreads that do nothing but invoke callbacks. Instead of having one of these kthreads act as leader, each group has a separate rcog kthread that handles grace periods for its group. Because these rcuog kthreads do not invoke callbacks, callback floods on one CPU no longer block callbacks from reaching the rcuc callback-invocation kthreads on other CPUs. This change does introduce additional kthreads, however: 1. The number of additional kthreads is about the square root of the number of CPUs, so that a 4096-CPU system would have only about 64 additional kthreads. Note that recent changes decreased the number of rcuo kthreads by a factor of two (CONFIG_PREEMPT=n) or even three (CONFIG_PREEMPT=y), so this still represents a significant improvement on most systems. 2. The leading "rcuo" of the rcuog kthreads should allow existing scripting to affinity these additional kthreads as needed, the same as for the rcuop and rcuos kthreads. (There are no longer any rcuob kthreads.) 3. A state-machine approach was considered and rejected. Although this would allow the rcuo kthreads to continue their dual leader/follower roles, it complicates callback invocation and makes it more difficult to consolidate rcuo callback invocation with existing softirq callback invocation. The introduction of rcuog kthreads should thus be acceptable. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-03-30 02:43:51 +03:00
struct rcu_data *rdp = per_cpu_ptr(&rcu_data, cpu);
struct rcu_data *rdp_gp;
struct task_struct *t;
/*
* If this isn't a no-CBs CPU or if it already has an rcuo kthread,
* then nothing to do.
*/
rcu/nocb: Provide separate no-CBs grace-period kthreads Currently, there is one no-CBs rcuo kthread per CPU, and these kthreads are divided into groups. The first rcuo kthread to come online in a given group is that group's leader, and the leader both waits for grace periods and invokes its CPU's callbacks. The non-leader rcuo kthreads only invoke callbacks. This works well in the real-time/embedded environments for which it was intended because such environments tend not to generate all that many callbacks. However, given huge floods of callbacks, it is possible for the leader kthread to be stuck invoking callbacks while its followers wait helplessly while their callbacks pile up. This is a good recipe for an OOM, and rcutorture's new callback-flood capability does generate such OOMs. One strategy would be to wait until such OOMs start happening in production, but similar OOMs have in fact happened starting in 2018. It would therefore be wise to take a more proactive approach. This commit therefore features per-CPU rcuo kthreads that do nothing but invoke callbacks. Instead of having one of these kthreads act as leader, each group has a separate rcog kthread that handles grace periods for its group. Because these rcuog kthreads do not invoke callbacks, callback floods on one CPU no longer block callbacks from reaching the rcuc callback-invocation kthreads on other CPUs. This change does introduce additional kthreads, however: 1. The number of additional kthreads is about the square root of the number of CPUs, so that a 4096-CPU system would have only about 64 additional kthreads. Note that recent changes decreased the number of rcuo kthreads by a factor of two (CONFIG_PREEMPT=n) or even three (CONFIG_PREEMPT=y), so this still represents a significant improvement on most systems. 2. The leading "rcuo" of the rcuog kthreads should allow existing scripting to affinity these additional kthreads as needed, the same as for the rcuop and rcuos kthreads. (There are no longer any rcuob kthreads.) 3. A state-machine approach was considered and rejected. Although this would allow the rcuo kthreads to continue their dual leader/follower roles, it complicates callback invocation and makes it more difficult to consolidate rcuo callback invocation with existing softirq callback invocation. The introduction of rcuog kthreads should thus be acceptable. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-03-30 02:43:51 +03:00
if (!rcu_is_nocb_cpu(cpu) || rdp->nocb_cb_kthread)
return;
/* If we didn't spawn the GP kthread first, reorganize! */
rcu/nocb: Provide separate no-CBs grace-period kthreads Currently, there is one no-CBs rcuo kthread per CPU, and these kthreads are divided into groups. The first rcuo kthread to come online in a given group is that group's leader, and the leader both waits for grace periods and invokes its CPU's callbacks. The non-leader rcuo kthreads only invoke callbacks. This works well in the real-time/embedded environments for which it was intended because such environments tend not to generate all that many callbacks. However, given huge floods of callbacks, it is possible for the leader kthread to be stuck invoking callbacks while its followers wait helplessly while their callbacks pile up. This is a good recipe for an OOM, and rcutorture's new callback-flood capability does generate such OOMs. One strategy would be to wait until such OOMs start happening in production, but similar OOMs have in fact happened starting in 2018. It would therefore be wise to take a more proactive approach. This commit therefore features per-CPU rcuo kthreads that do nothing but invoke callbacks. Instead of having one of these kthreads act as leader, each group has a separate rcog kthread that handles grace periods for its group. Because these rcuog kthreads do not invoke callbacks, callback floods on one CPU no longer block callbacks from reaching the rcuc callback-invocation kthreads on other CPUs. This change does introduce additional kthreads, however: 1. The number of additional kthreads is about the square root of the number of CPUs, so that a 4096-CPU system would have only about 64 additional kthreads. Note that recent changes decreased the number of rcuo kthreads by a factor of two (CONFIG_PREEMPT=n) or even three (CONFIG_PREEMPT=y), so this still represents a significant improvement on most systems. 2. The leading "rcuo" of the rcuog kthreads should allow existing scripting to affinity these additional kthreads as needed, the same as for the rcuop and rcuos kthreads. (There are no longer any rcuob kthreads.) 3. A state-machine approach was considered and rejected. Although this would allow the rcuo kthreads to continue their dual leader/follower roles, it complicates callback invocation and makes it more difficult to consolidate rcuo callback invocation with existing softirq callback invocation. The introduction of rcuog kthreads should thus be acceptable. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-03-30 02:43:51 +03:00
rdp_gp = rdp->nocb_gp_rdp;
if (!rdp_gp->nocb_gp_kthread) {
t = kthread_run(rcu_nocb_gp_kthread, rdp_gp,
"rcuog/%d", rdp_gp->cpu);
if (WARN_ONCE(IS_ERR(t), "%s: Could not start rcuo GP kthread, OOM is now expected behavior\n", __func__))
return;
WRITE_ONCE(rdp_gp->nocb_gp_kthread, t);
}
/* Spawn the kthread for this CPU. */
rcu/nocb: Provide separate no-CBs grace-period kthreads Currently, there is one no-CBs rcuo kthread per CPU, and these kthreads are divided into groups. The first rcuo kthread to come online in a given group is that group's leader, and the leader both waits for grace periods and invokes its CPU's callbacks. The non-leader rcuo kthreads only invoke callbacks. This works well in the real-time/embedded environments for which it was intended because such environments tend not to generate all that many callbacks. However, given huge floods of callbacks, it is possible for the leader kthread to be stuck invoking callbacks while its followers wait helplessly while their callbacks pile up. This is a good recipe for an OOM, and rcutorture's new callback-flood capability does generate such OOMs. One strategy would be to wait until such OOMs start happening in production, but similar OOMs have in fact happened starting in 2018. It would therefore be wise to take a more proactive approach. This commit therefore features per-CPU rcuo kthreads that do nothing but invoke callbacks. Instead of having one of these kthreads act as leader, each group has a separate rcog kthread that handles grace periods for its group. Because these rcuog kthreads do not invoke callbacks, callback floods on one CPU no longer block callbacks from reaching the rcuc callback-invocation kthreads on other CPUs. This change does introduce additional kthreads, however: 1. The number of additional kthreads is about the square root of the number of CPUs, so that a 4096-CPU system would have only about 64 additional kthreads. Note that recent changes decreased the number of rcuo kthreads by a factor of two (CONFIG_PREEMPT=n) or even three (CONFIG_PREEMPT=y), so this still represents a significant improvement on most systems. 2. The leading "rcuo" of the rcuog kthreads should allow existing scripting to affinity these additional kthreads as needed, the same as for the rcuop and rcuos kthreads. (There are no longer any rcuob kthreads.) 3. A state-machine approach was considered and rejected. Although this would allow the rcuo kthreads to continue their dual leader/follower roles, it complicates callback invocation and makes it more difficult to consolidate rcuo callback invocation with existing softirq callback invocation. The introduction of rcuog kthreads should thus be acceptable. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-03-30 02:43:51 +03:00
t = kthread_run(rcu_nocb_cb_kthread, rdp,
"rcuo%c/%d", rcu_state.abbr, cpu);
rcu/nocb: Provide separate no-CBs grace-period kthreads Currently, there is one no-CBs rcuo kthread per CPU, and these kthreads are divided into groups. The first rcuo kthread to come online in a given group is that group's leader, and the leader both waits for grace periods and invokes its CPU's callbacks. The non-leader rcuo kthreads only invoke callbacks. This works well in the real-time/embedded environments for which it was intended because such environments tend not to generate all that many callbacks. However, given huge floods of callbacks, it is possible for the leader kthread to be stuck invoking callbacks while its followers wait helplessly while their callbacks pile up. This is a good recipe for an OOM, and rcutorture's new callback-flood capability does generate such OOMs. One strategy would be to wait until such OOMs start happening in production, but similar OOMs have in fact happened starting in 2018. It would therefore be wise to take a more proactive approach. This commit therefore features per-CPU rcuo kthreads that do nothing but invoke callbacks. Instead of having one of these kthreads act as leader, each group has a separate rcog kthread that handles grace periods for its group. Because these rcuog kthreads do not invoke callbacks, callback floods on one CPU no longer block callbacks from reaching the rcuc callback-invocation kthreads on other CPUs. This change does introduce additional kthreads, however: 1. The number of additional kthreads is about the square root of the number of CPUs, so that a 4096-CPU system would have only about 64 additional kthreads. Note that recent changes decreased the number of rcuo kthreads by a factor of two (CONFIG_PREEMPT=n) or even three (CONFIG_PREEMPT=y), so this still represents a significant improvement on most systems. 2. The leading "rcuo" of the rcuog kthreads should allow existing scripting to affinity these additional kthreads as needed, the same as for the rcuop and rcuos kthreads. (There are no longer any rcuob kthreads.) 3. A state-machine approach was considered and rejected. Although this would allow the rcuo kthreads to continue their dual leader/follower roles, it complicates callback invocation and makes it more difficult to consolidate rcuo callback invocation with existing softirq callback invocation. The introduction of rcuog kthreads should thus be acceptable. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-03-30 02:43:51 +03:00
if (WARN_ONCE(IS_ERR(t), "%s: Could not start rcuo CB kthread, OOM is now expected behavior\n", __func__))
return;
rcu/nocb: Provide separate no-CBs grace-period kthreads Currently, there is one no-CBs rcuo kthread per CPU, and these kthreads are divided into groups. The first rcuo kthread to come online in a given group is that group's leader, and the leader both waits for grace periods and invokes its CPU's callbacks. The non-leader rcuo kthreads only invoke callbacks. This works well in the real-time/embedded environments for which it was intended because such environments tend not to generate all that many callbacks. However, given huge floods of callbacks, it is possible for the leader kthread to be stuck invoking callbacks while its followers wait helplessly while their callbacks pile up. This is a good recipe for an OOM, and rcutorture's new callback-flood capability does generate such OOMs. One strategy would be to wait until such OOMs start happening in production, but similar OOMs have in fact happened starting in 2018. It would therefore be wise to take a more proactive approach. This commit therefore features per-CPU rcuo kthreads that do nothing but invoke callbacks. Instead of having one of these kthreads act as leader, each group has a separate rcog kthread that handles grace periods for its group. Because these rcuog kthreads do not invoke callbacks, callback floods on one CPU no longer block callbacks from reaching the rcuc callback-invocation kthreads on other CPUs. This change does introduce additional kthreads, however: 1. The number of additional kthreads is about the square root of the number of CPUs, so that a 4096-CPU system would have only about 64 additional kthreads. Note that recent changes decreased the number of rcuo kthreads by a factor of two (CONFIG_PREEMPT=n) or even three (CONFIG_PREEMPT=y), so this still represents a significant improvement on most systems. 2. The leading "rcuo" of the rcuog kthreads should allow existing scripting to affinity these additional kthreads as needed, the same as for the rcuop and rcuos kthreads. (There are no longer any rcuob kthreads.) 3. A state-machine approach was considered and rejected. Although this would allow the rcuo kthreads to continue their dual leader/follower roles, it complicates callback invocation and makes it more difficult to consolidate rcuo callback invocation with existing softirq callback invocation. The introduction of rcuog kthreads should thus be acceptable. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-03-30 02:43:51 +03:00
WRITE_ONCE(rdp->nocb_cb_kthread, t);
WRITE_ONCE(rdp->nocb_gp_kthread, rdp_gp->nocb_gp_kthread);
}
/*
* If the specified CPU is a no-CBs CPU that does not already have its
* rcuo kthread, spawn it.
*/
static void rcu_spawn_cpu_nocb_kthread(int cpu)
{
if (rcu_scheduler_fully_active)
rcu_spawn_one_nocb_kthread(cpu);
}
/*
* Once the scheduler is running, spawn rcuo kthreads for all online
* no-CBs CPUs. This assumes that the early_initcall()s happen before
* non-boot CPUs come online -- if this changes, we will need to add
* some mutual exclusion.
*/
static void __init rcu_spawn_nocb_kthreads(void)
{
int cpu;
for_each_online_cpu(cpu)
rcu_spawn_cpu_nocb_kthread(cpu);
}
/* How many CB CPU IDs per GP kthread? Default of -1 for sqrt(nr_cpu_ids). */
static int rcu_nocb_gp_stride = -1;
module_param(rcu_nocb_gp_stride, int, 0444);
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
/*
* Initialize GP-CB relationships for all no-CBs CPU.
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
*/
static void __init rcu_organize_nocb_kthreads(void)
{
int cpu;
bool firsttime = true;
bool gotnocbs = false;
bool gotnocbscbs = true;
int ls = rcu_nocb_gp_stride;
int nl = 0; /* Next GP kthread. */
struct rcu_data *rdp;
struct rcu_data *rdp_gp = NULL; /* Suppress misguided gcc warn. */
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
struct rcu_data *rdp_prev = NULL;
if (!cpumask_available(rcu_nocb_mask))
return;
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
if (ls == -1) {
ls = nr_cpu_ids / int_sqrt(nr_cpu_ids);
rcu_nocb_gp_stride = ls;
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
}
/*
* Each pass through this loop sets up one rcu_data structure.
* Should the corresponding CPU come online in the future, then
* we will spawn the needed set of rcu_nocb_kthread() kthreads.
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
*/
for_each_cpu(cpu, rcu_nocb_mask) {
rdp = per_cpu_ptr(&rcu_data, cpu);
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
if (rdp->cpu >= nl) {
/* New GP kthread, set up for CBs & next GP. */
gotnocbs = true;
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
nl = DIV_ROUND_UP(rdp->cpu + 1, ls) * ls;
rdp->nocb_gp_rdp = rdp;
rdp_gp = rdp;
if (dump_tree) {
if (!firsttime)
pr_cont("%s\n", gotnocbscbs
? "" : " (self only)");
gotnocbscbs = false;
firsttime = false;
pr_alert("%s: No-CB GP kthread CPU %d:",
__func__, cpu);
}
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
} else {
/* Another CB kthread, link to previous GP kthread. */
gotnocbscbs = true;
rdp->nocb_gp_rdp = rdp_gp;
rdp_prev->nocb_next_cb_rdp = rdp;
if (dump_tree)
pr_cont(" %d", cpu);
rcu: Parallelize and economize NOCB kthread wakeups An 80-CPU system with a context-switch-heavy workload can require so many NOCB kthread wakeups that the RCU grace-period kthreads spend several tens of percent of a CPU just awakening things. This clearly will not scale well: If you add enough CPUs, the RCU grace-period kthreads would get behind, increasing grace-period latency. To avoid this problem, this commit divides the NOCB kthreads into leaders and followers, where the grace-period kthreads awaken the leaders each of whom in turn awakens its followers. By default, the number of groups of kthreads is the square root of the number of CPUs, but this default may be overridden using the rcutree.rcu_nocb_leader_stride boot parameter. This reduces the number of wakeups done per grace period by the RCU grace-period kthread by the square root of the number of CPUs, but of course by shifting those wakeups to the leaders. In addition, because the leaders do grace periods on behalf of their respective followers, the number of wakeups of the followers decreases by up to a factor of two. Instead of being awakened once when new callbacks arrive and again at the end of the grace period, the followers are awakened only at the end of the grace period. For a numerical example, in a 4096-CPU system, the grace-period kthread would awaken 64 leaders, each of which would awaken its 63 followers at the end of the grace period. This compares favorably with the 79 wakeups for the grace-period kthread on an 80-CPU system. Reported-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-24 20:26:11 +04:00
}
rdp_prev = rdp;
}
if (gotnocbs && dump_tree)
pr_cont("%s\n", gotnocbscbs ? "" : " (self only)");
}
/*
* Bind the current task to the offloaded CPUs. If there are no offloaded
* CPUs, leave the task unbound. Splat if the bind attempt fails.
*/
void rcu_bind_current_to_nocb(void)
{
if (cpumask_available(rcu_nocb_mask) && cpumask_weight(rcu_nocb_mask))
WARN_ON(sched_setaffinity(current->pid, rcu_nocb_mask));
}
EXPORT_SYMBOL_GPL(rcu_bind_current_to_nocb);
/*
* Dump out nocb grace-period kthread state for the specified rcu_data
* structure.
*/
static void show_rcu_nocb_gp_state(struct rcu_data *rdp)
{
struct rcu_node *rnp = rdp->mynode;
pr_info("nocb GP %d %c%c%c%c%c%c %c[%c%c] %c%c:%ld rnp %d:%d %lu\n",
rdp->cpu,
"kK"[!!rdp->nocb_gp_kthread],
"lL"[raw_spin_is_locked(&rdp->nocb_gp_lock)],
"dD"[!!rdp->nocb_defer_wakeup],
"tT"[timer_pending(&rdp->nocb_timer)],
"bB"[timer_pending(&rdp->nocb_bypass_timer)],
"sS"[!!rdp->nocb_gp_sleep],
".W"[swait_active(&rdp->nocb_gp_wq)],
".W"[swait_active(&rnp->nocb_gp_wq[0])],
".W"[swait_active(&rnp->nocb_gp_wq[1])],
".B"[!!rdp->nocb_gp_bypass],
".G"[!!rdp->nocb_gp_gp],
(long)rdp->nocb_gp_seq,
rnp->grplo, rnp->grphi, READ_ONCE(rdp->nocb_gp_loops));
}
/* Dump out nocb kthread state for the specified rcu_data structure. */
static void show_rcu_nocb_state(struct rcu_data *rdp)
{
struct rcu_segcblist *rsclp = &rdp->cblist;
bool waslocked;
bool wastimer;
bool wassleep;
if (rdp->nocb_gp_rdp == rdp)
show_rcu_nocb_gp_state(rdp);
pr_info(" CB %d->%d %c%c%c%c%c%c F%ld L%ld C%d %c%c%c%c%c q%ld\n",
rdp->cpu, rdp->nocb_gp_rdp->cpu,
"kK"[!!rdp->nocb_cb_kthread],
"bB"[raw_spin_is_locked(&rdp->nocb_bypass_lock)],
"cC"[!!atomic_read(&rdp->nocb_lock_contended)],
"lL"[raw_spin_is_locked(&rdp->nocb_lock)],
"sS"[!!rdp->nocb_cb_sleep],
".W"[swait_active(&rdp->nocb_cb_wq)],
jiffies - rdp->nocb_bypass_first,
jiffies - rdp->nocb_nobypass_last,
rdp->nocb_nobypass_count,
".D"[rcu_segcblist_ready_cbs(rsclp)],
".W"[!rcu_segcblist_restempty(rsclp, RCU_DONE_TAIL)],
".R"[!rcu_segcblist_restempty(rsclp, RCU_WAIT_TAIL)],
".N"[!rcu_segcblist_restempty(rsclp, RCU_NEXT_READY_TAIL)],
".B"[!!rcu_cblist_n_cbs(&rdp->nocb_bypass)],
rcu_segcblist_n_cbs(&rdp->cblist));
/* It is OK for GP kthreads to have GP state. */
if (rdp->nocb_gp_rdp == rdp)
return;
waslocked = raw_spin_is_locked(&rdp->nocb_gp_lock);
wastimer = timer_pending(&rdp->nocb_bypass_timer);
wassleep = swait_active(&rdp->nocb_gp_wq);
if (!rdp->nocb_gp_sleep && !waslocked && !wastimer && !wassleep)
return; /* Nothing untowards. */
pr_info(" nocb GP activity on CB-only CPU!!! %c%c%c%c %c\n",
"lL"[waslocked],
"dD"[!!rdp->nocb_defer_wakeup],
"tT"[wastimer],
"sS"[!!rdp->nocb_gp_sleep],
".W"[wassleep]);
}
#else /* #ifdef CONFIG_RCU_NOCB_CPU */
/* No ->nocb_lock to acquire. */
static void rcu_nocb_lock(struct rcu_data *rdp)
rcu: Make rcu_barrier() understand about missing rcuo kthreads Commit 35ce7f29a44a (rcu: Create rcuo kthreads only for onlined CPUs) avoids creating rcuo kthreads for CPUs that never come online. This fixes a bug in many instances of firmware: Instead of lying about their age, these systems instead lie about the number of CPUs that they have. Before commit 35ce7f29a44a, this could result in huge numbers of useless rcuo kthreads being created. It appears that experience indicates that I should have told the people suffering from this problem to fix their broken firmware, but I instead produced what turned out to be a partial fix. The missing piece supplied by this commit makes sure that rcu_barrier() knows not to post callbacks for no-CBs CPUs that have not yet come online, because otherwise rcu_barrier() will hang on systems having firmware that lies about the number of CPUs. It is tempting to simply have rcu_barrier() refuse to post a callback on any no-CBs CPU that does not have an rcuo kthread. This unfortunately does not work because rcu_barrier() is required to wait for all pending callbacks. It is therefore required to wait even for those callbacks that cannot possibly be invoked. Even if doing so hangs the system. Given that posting a callback to a no-CBs CPU that does not yet have an rcuo kthread can hang rcu_barrier(), It is tempting to report an error in this case. Unfortunately, this will result in false positives at boot time, when it is perfectly legal to post callbacks to the boot CPU before the scheduler has started, in other words, before it is legal to invoke rcu_barrier(). So this commit instead has rcu_barrier() avoid posting callbacks to CPUs having neither rcuo kthread nor pending callbacks, and has it complain bitterly if it finds CPUs having no rcuo kthread but some pending callbacks. And when rcu_barrier() does find CPUs having no rcuo kthread but pending callbacks, as noted earlier, it has no choice but to hang indefinitely. Reported-by: Yanko Kaneti <yaneti@declera.com> Reported-by: Jay Vosburgh <jay.vosburgh@canonical.com> Reported-by: Meelis Roos <mroos@linux.ee> Reported-by: Eric B Munson <emunson@akamai.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Eric B Munson <emunson@akamai.com> Tested-by: Jay Vosburgh <jay.vosburgh@canonical.com> Tested-by: Yanko Kaneti <yaneti@declera.com> Tested-by: Kevin Fenzi <kevin@scrye.com> Tested-by: Meelis Roos <mroos@linux.ee>
2014-10-27 19:15:54 +03:00
{
}
/* No ->nocb_lock to release. */
static void rcu_nocb_unlock(struct rcu_data *rdp)
{
}
/* No ->nocb_lock to release. */
static void rcu_nocb_unlock_irqrestore(struct rcu_data *rdp,
unsigned long flags)
{
local_irq_restore(flags);
rcu: Make rcu_barrier() understand about missing rcuo kthreads Commit 35ce7f29a44a (rcu: Create rcuo kthreads only for onlined CPUs) avoids creating rcuo kthreads for CPUs that never come online. This fixes a bug in many instances of firmware: Instead of lying about their age, these systems instead lie about the number of CPUs that they have. Before commit 35ce7f29a44a, this could result in huge numbers of useless rcuo kthreads being created. It appears that experience indicates that I should have told the people suffering from this problem to fix their broken firmware, but I instead produced what turned out to be a partial fix. The missing piece supplied by this commit makes sure that rcu_barrier() knows not to post callbacks for no-CBs CPUs that have not yet come online, because otherwise rcu_barrier() will hang on systems having firmware that lies about the number of CPUs. It is tempting to simply have rcu_barrier() refuse to post a callback on any no-CBs CPU that does not have an rcuo kthread. This unfortunately does not work because rcu_barrier() is required to wait for all pending callbacks. It is therefore required to wait even for those callbacks that cannot possibly be invoked. Even if doing so hangs the system. Given that posting a callback to a no-CBs CPU that does not yet have an rcuo kthread can hang rcu_barrier(), It is tempting to report an error in this case. Unfortunately, this will result in false positives at boot time, when it is perfectly legal to post callbacks to the boot CPU before the scheduler has started, in other words, before it is legal to invoke rcu_barrier(). So this commit instead has rcu_barrier() avoid posting callbacks to CPUs having neither rcuo kthread nor pending callbacks, and has it complain bitterly if it finds CPUs having no rcuo kthread but some pending callbacks. And when rcu_barrier() does find CPUs having no rcuo kthread but pending callbacks, as noted earlier, it has no choice but to hang indefinitely. Reported-by: Yanko Kaneti <yaneti@declera.com> Reported-by: Jay Vosburgh <jay.vosburgh@canonical.com> Reported-by: Meelis Roos <mroos@linux.ee> Reported-by: Eric B Munson <emunson@akamai.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Eric B Munson <emunson@akamai.com> Tested-by: Jay Vosburgh <jay.vosburgh@canonical.com> Tested-by: Yanko Kaneti <yaneti@declera.com> Tested-by: Kevin Fenzi <kevin@scrye.com> Tested-by: Meelis Roos <mroos@linux.ee>
2014-10-27 19:15:54 +03:00
}
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
/* Lockdep check that ->cblist may be safely accessed. */
static void rcu_lockdep_assert_cblist_protected(struct rcu_data *rdp)
{
lockdep_assert_irqs_disabled();
}
rcu: Use simple wait queues where possible in rcutree As of commit dae6e64d2bcfd ("rcu: Introduce proper blocking to no-CBs kthreads GP waits") the RCU subsystem started making use of wait queues. Here we convert all additions of RCU wait queues to use simple wait queues, since they don't need the extra overhead of the full wait queue features. Originally this was done for RT kernels[1], since we would get things like... BUG: sleeping function called from invalid context at kernel/rtmutex.c:659 in_atomic(): 1, irqs_disabled(): 1, pid: 8, name: rcu_preempt Pid: 8, comm: rcu_preempt Not tainted Call Trace: [<ffffffff8106c8d0>] __might_sleep+0xd0/0xf0 [<ffffffff817d77b4>] rt_spin_lock+0x24/0x50 [<ffffffff8106fcf6>] __wake_up+0x36/0x70 [<ffffffff810c4542>] rcu_gp_kthread+0x4d2/0x680 [<ffffffff8105f910>] ? __init_waitqueue_head+0x50/0x50 [<ffffffff810c4070>] ? rcu_gp_fqs+0x80/0x80 [<ffffffff8105eabb>] kthread+0xdb/0xe0 [<ffffffff8106b912>] ? finish_task_switch+0x52/0x100 [<ffffffff817e0754>] kernel_thread_helper+0x4/0x10 [<ffffffff8105e9e0>] ? __init_kthread_worker+0x60/0x60 [<ffffffff817e0750>] ? gs_change+0xb/0xb ...and hence simple wait queues were deployed on RT out of necessity (as simple wait uses a raw lock), but mainline might as well take advantage of the more streamline support as well. [1] This is a carry forward of work from v3.10-rt; the original conversion was by Thomas on an earlier -rt version, and Sebastian extended it to additional post-3.10 added RCU waiters; here I've added a commit log and unified the RCU changes into one, and uprev'd it to match mainline RCU. Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux-rt-users@vger.kernel.org Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1455871601-27484-6-git-send-email-wagi@monom.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-19 11:46:41 +03:00
static void rcu_nocb_gp_cleanup(struct swait_queue_head *sq)
{
}
rcu: Use simple wait queues where possible in rcutree As of commit dae6e64d2bcfd ("rcu: Introduce proper blocking to no-CBs kthreads GP waits") the RCU subsystem started making use of wait queues. Here we convert all additions of RCU wait queues to use simple wait queues, since they don't need the extra overhead of the full wait queue features. Originally this was done for RT kernels[1], since we would get things like... BUG: sleeping function called from invalid context at kernel/rtmutex.c:659 in_atomic(): 1, irqs_disabled(): 1, pid: 8, name: rcu_preempt Pid: 8, comm: rcu_preempt Not tainted Call Trace: [<ffffffff8106c8d0>] __might_sleep+0xd0/0xf0 [<ffffffff817d77b4>] rt_spin_lock+0x24/0x50 [<ffffffff8106fcf6>] __wake_up+0x36/0x70 [<ffffffff810c4542>] rcu_gp_kthread+0x4d2/0x680 [<ffffffff8105f910>] ? __init_waitqueue_head+0x50/0x50 [<ffffffff810c4070>] ? rcu_gp_fqs+0x80/0x80 [<ffffffff8105eabb>] kthread+0xdb/0xe0 [<ffffffff8106b912>] ? finish_task_switch+0x52/0x100 [<ffffffff817e0754>] kernel_thread_helper+0x4/0x10 [<ffffffff8105e9e0>] ? __init_kthread_worker+0x60/0x60 [<ffffffff817e0750>] ? gs_change+0xb/0xb ...and hence simple wait queues were deployed on RT out of necessity (as simple wait uses a raw lock), but mainline might as well take advantage of the more streamline support as well. [1] This is a carry forward of work from v3.10-rt; the original conversion was by Thomas on an earlier -rt version, and Sebastian extended it to additional post-3.10 added RCU waiters; here I've added a commit log and unified the RCU changes into one, and uprev'd it to match mainline RCU. Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux-rt-users@vger.kernel.org Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1455871601-27484-6-git-send-email-wagi@monom.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-19 11:46:41 +03:00
static struct swait_queue_head *rcu_nocb_gp_get(struct rcu_node *rnp)
rcu: Do not call rcu_nocb_gp_cleanup() while holding rnp->lock rcu_nocb_gp_cleanup() is called while holding rnp->lock. Currently, this is okay because the wake_up_all() in rcu_nocb_gp_cleanup() will not enable the IRQs. lockdep is happy. By switching over using swait this is not true anymore. swake_up_all() enables the IRQs while processing the waiters. __do_softirq() can now run and will eventually call rcu_process_callbacks() which wants to grap nrp->lock. Let's move the rcu_nocb_gp_cleanup() call outside the lock before we switch over to swait. If we would hold the rnp->lock and use swait, lockdep reports following: ================================= [ INFO: inconsistent lock state ] 4.2.0-rc5-00025-g9a73ba0 #136 Not tainted --------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. rcu_preempt/8 [HC0[0]:SC0[0]:HE1:SE1] takes: (rcu_node_1){+.?...}, at: [<ffffffff811387c7>] rcu_gp_kthread+0xb97/0xeb0 {IN-SOFTIRQ-W} state was registered at: [<ffffffff81109b9f>] __lock_acquire+0xd5f/0x21e0 [<ffffffff8110be0f>] lock_acquire+0xdf/0x2b0 [<ffffffff81841cc9>] _raw_spin_lock_irqsave+0x59/0xa0 [<ffffffff81136991>] rcu_process_callbacks+0x141/0x3c0 [<ffffffff810b1a9d>] __do_softirq+0x14d/0x670 [<ffffffff810b2214>] irq_exit+0x104/0x110 [<ffffffff81844e96>] smp_apic_timer_interrupt+0x46/0x60 [<ffffffff81842e70>] apic_timer_interrupt+0x70/0x80 [<ffffffff810dba66>] rq_attach_root+0xa6/0x100 [<ffffffff810dbc2d>] cpu_attach_domain+0x16d/0x650 [<ffffffff810e4b42>] build_sched_domains+0x942/0xb00 [<ffffffff821777c2>] sched_init_smp+0x509/0x5c1 [<ffffffff821551e3>] kernel_init_freeable+0x172/0x28f [<ffffffff8182cdce>] kernel_init+0xe/0xe0 [<ffffffff8184231f>] ret_from_fork+0x3f/0x70 irq event stamp: 76 hardirqs last enabled at (75): [<ffffffff81841330>] _raw_spin_unlock_irq+0x30/0x60 hardirqs last disabled at (76): [<ffffffff8184116f>] _raw_spin_lock_irq+0x1f/0x90 softirqs last enabled at (0): [<ffffffff810a8df2>] copy_process.part.26+0x602/0x1cf0 softirqs last disabled at (0): [< (null)>] (null) other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(rcu_node_1); <Interrupt> lock(rcu_node_1); *** DEADLOCK *** 1 lock held by rcu_preempt/8: #0: (rcu_node_1){+.?...}, at: [<ffffffff811387c7>] rcu_gp_kthread+0xb97/0xeb0 stack backtrace: CPU: 0 PID: 8 Comm: rcu_preempt Not tainted 4.2.0-rc5-00025-g9a73ba0 #136 Hardware name: Dell Inc. PowerEdge R820/066N7P, BIOS 2.0.20 01/16/2014 0000000000000000 000000006d7e67d8 ffff881fb081fbd8 ffffffff818379e0 0000000000000000 ffff881fb0812a00 ffff881fb081fc38 ffffffff8110813b 0000000000000000 0000000000000001 ffff881f00000001 ffffffff8102fa4f Call Trace: [<ffffffff818379e0>] dump_stack+0x4f/0x7b [<ffffffff8110813b>] print_usage_bug+0x1db/0x1e0 [<ffffffff8102fa4f>] ? save_stack_trace+0x2f/0x50 [<ffffffff811087ad>] mark_lock+0x66d/0x6e0 [<ffffffff81107790>] ? check_usage_forwards+0x150/0x150 [<ffffffff81108898>] mark_held_locks+0x78/0xa0 [<ffffffff81841330>] ? _raw_spin_unlock_irq+0x30/0x60 [<ffffffff81108a28>] trace_hardirqs_on_caller+0x168/0x220 [<ffffffff81108aed>] trace_hardirqs_on+0xd/0x10 [<ffffffff81841330>] _raw_spin_unlock_irq+0x30/0x60 [<ffffffff810fd1c7>] swake_up_all+0xb7/0xe0 [<ffffffff811386e1>] rcu_gp_kthread+0xab1/0xeb0 [<ffffffff811089bf>] ? trace_hardirqs_on_caller+0xff/0x220 [<ffffffff81841341>] ? _raw_spin_unlock_irq+0x41/0x60 [<ffffffff81137c30>] ? rcu_barrier+0x20/0x20 [<ffffffff810d2014>] kthread+0x104/0x120 [<ffffffff81841330>] ? _raw_spin_unlock_irq+0x30/0x60 [<ffffffff810d1f10>] ? kthread_create_on_node+0x260/0x260 [<ffffffff8184231f>] ret_from_fork+0x3f/0x70 [<ffffffff810d1f10>] ? kthread_create_on_node+0x260/0x260 Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux-rt-users@vger.kernel.org Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1455871601-27484-5-git-send-email-wagi@monom.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-19 11:46:40 +03:00
{
return NULL;
}
static void rcu_init_one_nocb(struct rcu_node *rnp)
{
}
rcu/nocb: Add bypass callback queueing Use of the rcu_data structure's segmented ->cblist for no-CBs CPUs takes advantage of unrelated grace periods, thus reducing the memory footprint in the face of floods of call_rcu() invocations. However, the ->cblist field is a more-complex rcu_segcblist structure which must be protected via locking. Even though there are only three entities which can acquire this lock (the CPU invoking call_rcu(), the no-CBs grace-period kthread, and the no-CBs callbacks kthread), the contention on this lock is excessive under heavy stress. This commit therefore greatly reduces contention by provisioning an rcu_cblist structure field named ->nocb_bypass within the rcu_data structure. Each no-CBs CPU is permitted only a limited number of enqueues onto the ->cblist per jiffy, controlled by a new nocb_nobypass_lim_per_jiffy kernel boot parameter that defaults to about 16 enqueues per millisecond (16 * 1000 / HZ). When that limit is exceeded, the CPU instead enqueues onto the new ->nocb_bypass. The ->nocb_bypass is flushed into the ->cblist every jiffy or when the number of callbacks on ->nocb_bypass exceeds qhimark, whichever happens first. During call_rcu() floods, this flushing is carried out by the CPU during the course of its call_rcu() invocations. However, a CPU could simply stop invoking call_rcu() at any time. The no-CBs grace-period kthread therefore carries out less-aggressive flushing (every few jiffies or when the number of callbacks on ->nocb_bypass exceeds (2 * qhimark), whichever comes first). This means that the no-CBs grace-period kthread cannot be permitted to do unbounded waits while there are callbacks on ->nocb_bypass. A ->nocb_bypass_timer is used to provide the needed wakeups. [ paulmck: Apply Coverity feedback reported by Colin Ian King. ] Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-07-03 02:03:33 +03:00
static bool rcu_nocb_flush_bypass(struct rcu_data *rdp, struct rcu_head *rhp,
unsigned long j)
{
return true;
}
static bool rcu_nocb_try_bypass(struct rcu_data *rdp, struct rcu_head *rhp,
bool *was_alldone, unsigned long flags)
{
return false;
}
static void __call_rcu_nocb_wake(struct rcu_data *rdp, bool was_empty,
unsigned long flags)
{
WARN_ON_ONCE(1); /* Should be dead code! */
}
static void __init rcu_boot_init_nocb_percpu_data(struct rcu_data *rdp)
{
}
static int rcu_nocb_need_deferred_wakeup(struct rcu_data *rdp)
rcu: Break call_rcu() deadlock involving scheduler and perf Dave Jones got the following lockdep splat: > ====================================================== > [ INFO: possible circular locking dependency detected ] > 3.12.0-rc3+ #92 Not tainted > ------------------------------------------------------- > trinity-child2/15191 is trying to acquire lock: > (&rdp->nocb_wq){......}, at: [<ffffffff8108ff43>] __wake_up+0x23/0x50 > > but task is already holding lock: > (&ctx->lock){-.-...}, at: [<ffffffff81154c19>] perf_event_exit_task+0x109/0x230 > > which lock already depends on the new lock. > > > the existing dependency chain (in reverse order) is: > > -> #3 (&ctx->lock){-.-...}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff81733f90>] _raw_spin_lock+0x40/0x80 > [<ffffffff811500ff>] __perf_event_task_sched_out+0x2df/0x5e0 > [<ffffffff81091b83>] perf_event_task_sched_out+0x93/0xa0 > [<ffffffff81732052>] __schedule+0x1d2/0xa20 > [<ffffffff81732f30>] preempt_schedule_irq+0x50/0xb0 > [<ffffffff817352b6>] retint_kernel+0x26/0x30 > [<ffffffff813eed04>] tty_flip_buffer_push+0x34/0x50 > [<ffffffff813f0504>] pty_write+0x54/0x60 > [<ffffffff813e900d>] n_tty_write+0x32d/0x4e0 > [<ffffffff813e5838>] tty_write+0x158/0x2d0 > [<ffffffff811c4850>] vfs_write+0xc0/0x1f0 > [<ffffffff811c52cc>] SyS_write+0x4c/0xa0 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 > > -> #2 (&rq->lock){-.-.-.}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff81733f90>] _raw_spin_lock+0x40/0x80 > [<ffffffff810980b2>] wake_up_new_task+0xc2/0x2e0 > [<ffffffff81054336>] do_fork+0x126/0x460 > [<ffffffff81054696>] kernel_thread+0x26/0x30 > [<ffffffff8171ff93>] rest_init+0x23/0x140 > [<ffffffff81ee1e4b>] start_kernel+0x3f6/0x403 > [<ffffffff81ee1571>] x86_64_start_reservations+0x2a/0x2c > [<ffffffff81ee1664>] x86_64_start_kernel+0xf1/0xf4 > > -> #1 (&p->pi_lock){-.-.-.}: > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff810979d1>] try_to_wake_up+0x31/0x350 > [<ffffffff81097d62>] default_wake_function+0x12/0x20 > [<ffffffff81084af8>] autoremove_wake_function+0x18/0x40 > [<ffffffff8108ea38>] __wake_up_common+0x58/0x90 > [<ffffffff8108ff59>] __wake_up+0x39/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff81111b8d>] call_rcu+0x1d/0x20 > [<ffffffff81093697>] cpu_attach_domain+0x287/0x360 > [<ffffffff81099d7e>] build_sched_domains+0xe5e/0x10a0 > [<ffffffff81efa7fc>] sched_init_smp+0x3b7/0x47a > [<ffffffff81ee1f4e>] kernel_init_freeable+0xf6/0x202 > [<ffffffff817200be>] kernel_init+0xe/0x190 > [<ffffffff8173d22c>] ret_from_fork+0x7c/0xb0 > > -> #0 (&rdp->nocb_wq){......}: > [<ffffffff810cb7ca>] __lock_acquire+0x191a/0x1be0 > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff8108ff43>] __wake_up+0x23/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff81111bb0>] kfree_call_rcu+0x20/0x30 > [<ffffffff81149abf>] put_ctx+0x4f/0x70 > [<ffffffff81154c3e>] perf_event_exit_task+0x12e/0x230 > [<ffffffff81056b8d>] do_exit+0x30d/0xcc0 > [<ffffffff8105893c>] do_group_exit+0x4c/0xc0 > [<ffffffff810589c4>] SyS_exit_group+0x14/0x20 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 > > other info that might help us debug this: > > Chain exists of: > &rdp->nocb_wq --> &rq->lock --> &ctx->lock > > Possible unsafe locking scenario: > > CPU0 CPU1 > ---- ---- > lock(&ctx->lock); > lock(&rq->lock); > lock(&ctx->lock); > lock(&rdp->nocb_wq); > > *** DEADLOCK *** > > 1 lock held by trinity-child2/15191: > #0: (&ctx->lock){-.-...}, at: [<ffffffff81154c19>] perf_event_exit_task+0x109/0x230 > > stack backtrace: > CPU: 2 PID: 15191 Comm: trinity-child2 Not tainted 3.12.0-rc3+ #92 > ffffffff82565b70 ffff880070c2dbf8 ffffffff8172a363 ffffffff824edf40 > ffff880070c2dc38 ffffffff81726741 ffff880070c2dc90 ffff88022383b1c0 > ffff88022383aac0 0000000000000000 ffff88022383b188 ffff88022383b1c0 > Call Trace: > [<ffffffff8172a363>] dump_stack+0x4e/0x82 > [<ffffffff81726741>] print_circular_bug+0x200/0x20f > [<ffffffff810cb7ca>] __lock_acquire+0x191a/0x1be0 > [<ffffffff810c6439>] ? get_lock_stats+0x19/0x60 > [<ffffffff8100b2f4>] ? native_sched_clock+0x24/0x80 > [<ffffffff810cc243>] lock_acquire+0x93/0x200 > [<ffffffff8108ff43>] ? __wake_up+0x23/0x50 > [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90 > [<ffffffff8108ff43>] ? __wake_up+0x23/0x50 > [<ffffffff8108ff43>] __wake_up+0x23/0x50 > [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0 > [<ffffffff81111450>] __call_rcu+0x140/0x820 > [<ffffffff8109bc8f>] ? local_clock+0x3f/0x50 > [<ffffffff81111bb0>] kfree_call_rcu+0x20/0x30 > [<ffffffff81149abf>] put_ctx+0x4f/0x70 > [<ffffffff81154c3e>] perf_event_exit_task+0x12e/0x230 > [<ffffffff81056b8d>] do_exit+0x30d/0xcc0 > [<ffffffff810c9af5>] ? trace_hardirqs_on_caller+0x115/0x1e0 > [<ffffffff810c9bcd>] ? trace_hardirqs_on+0xd/0x10 > [<ffffffff8105893c>] do_group_exit+0x4c/0xc0 > [<ffffffff810589c4>] SyS_exit_group+0x14/0x20 > [<ffffffff8173d4e4>] tracesys+0xdd/0xe2 The underlying problem is that perf is invoking call_rcu() with the scheduler locks held, but in NOCB mode, call_rcu() will with high probability invoke the scheduler -- which just might want to use its locks. The reason that call_rcu() needs to invoke the scheduler is to wake up the corresponding rcuo callback-offload kthread, which does the job of starting up a grace period and invoking the callbacks afterwards. One solution (championed on a related problem by Lai Jiangshan) is to simply defer the wakeup to some point where scheduler locks are no longer held. Since we don't want to unnecessarily incur the cost of such deferral, the task before us is threefold: 1. Determine when it is likely that a relevant scheduler lock is held. 2. Defer the wakeup in such cases. 3. Ensure that all deferred wakeups eventually happen, preferably sooner rather than later. We use irqs_disabled_flags() as a proxy for relevant scheduler locks being held. This works because the relevant locks are always acquired with interrupts disabled. We may defer more often than needed, but that is at least safe. The wakeup deferral is tracked via a new field in the per-CPU and per-RCU-flavor rcu_data structure, namely ->nocb_defer_wakeup. This flag is checked by the RCU core processing. The __rcu_pending() function now checks this flag, which causes rcu_check_callbacks() to initiate RCU core processing at each scheduling-clock interrupt where this flag is set. Of course this is not sufficient because scheduling-clock interrupts are often turned off (the things we used to be able to count on!). So the flags are also checked on entry to any state that RCU considers to be idle, which includes both NO_HZ_IDLE idle state and NO_HZ_FULL user-mode-execution state. This approach should allow call_rcu() to be invoked regardless of what locks you might be holding, the key word being "should". Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org>
2013-10-05 01:33:34 +04:00
{
return false;
}
static void do_nocb_deferred_wakeup(struct rcu_data *rdp)
{
}
static void rcu_spawn_cpu_nocb_kthread(int cpu)
{
}
static void __init rcu_spawn_nocb_kthreads(void)
{
}
static void show_rcu_nocb_state(struct rcu_data *rdp)
{
}
#endif /* #else #ifdef CONFIG_RCU_NOCB_CPU */
rcu: Kick adaptive-ticks CPUs that are holding up RCU grace periods Adaptive-ticks CPUs inform RCU when they enter kernel mode, but they do not necessarily turn the scheduler-clock tick back on. This state of affairs could result in RCU waiting on an adaptive-ticks CPU running for an extended period in kernel mode. Such a CPU will never run the RCU state machine, and could therefore indefinitely extend the RCU state machine, sooner or later resulting in an OOM condition. This patch, inspired by an earlier patch by Frederic Weisbecker, therefore causes RCU's force-quiescent-state processing to check for this condition and to send an IPI to CPUs that remain in that state for too long. "Too long" currently means about three jiffies by default, which is quite some time for a CPU to remain in the kernel without blocking. The rcu_tree.jiffies_till_first_fqs and rcutree.jiffies_till_next_fqs sysfs variables may be used to tune "too long" if needed. Reported-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-04-13 03:19:10 +04:00
/*
* Is this CPU a NO_HZ_FULL CPU that should ignore RCU so that the
* grace-period kthread will do force_quiescent_state() processing?
* The idea is to avoid waking up RCU core processing on such a
* CPU unless the grace period has extended for too long.
*
* This code relies on the fact that all NO_HZ_FULL CPUs are also
* CONFIG_RCU_NOCB_CPU CPUs.
*/
static bool rcu_nohz_full_cpu(void)
{
#ifdef CONFIG_NO_HZ_FULL
if (tick_nohz_full_cpu(smp_processor_id()) &&
(!rcu_gp_in_progress() ||
time_before(jiffies, READ_ONCE(rcu_state.gp_start) + HZ)))
return true;
#endif /* #ifdef CONFIG_NO_HZ_FULL */
return false;
}
/*
* Bind the RCU grace-period kthreads to the housekeeping CPU.
*/
static void rcu_bind_gp_kthread(void)
{
if (!tick_nohz_full_enabled())
return;
housekeeping_affine(current, HK_FLAG_RCU);
}
/* Record the current task on dyntick-idle entry. */
static void noinstr rcu_dynticks_task_enter(void)
{
#if defined(CONFIG_TASKS_RCU) && defined(CONFIG_NO_HZ_FULL)
WRITE_ONCE(current->rcu_tasks_idle_cpu, smp_processor_id());
#endif /* #if defined(CONFIG_TASKS_RCU) && defined(CONFIG_NO_HZ_FULL) */
}
/* Record no current task on dyntick-idle exit. */
static void noinstr rcu_dynticks_task_exit(void)
{
#if defined(CONFIG_TASKS_RCU) && defined(CONFIG_NO_HZ_FULL)
WRITE_ONCE(current->rcu_tasks_idle_cpu, -1);
#endif /* #if defined(CONFIG_TASKS_RCU) && defined(CONFIG_NO_HZ_FULL) */
}
rcu-tasks: Avoid IPIing userspace/idle tasks if kernel is so built Systems running CPU-bound real-time task do not want IPIs sent to CPUs executing nohz_full userspace tasks. Battery-powered systems don't want IPIs sent to idle CPUs in low-power mode. Unfortunately, RCU tasks trace can and will send such IPIs in some cases. Both of these situations occur only when the target CPU is in RCU dyntick-idle mode, in other words, when RCU is not watching the target CPU. This suggests that CPUs in dyntick-idle mode should use memory barriers in outermost invocations of rcu_read_lock_trace() and rcu_read_unlock_trace(), which would allow the RCU tasks trace grace period to directly read out the target CPU's read-side state. One challenge is that RCU tasks trace is not targeting a specific CPU, but rather a task. And that task could switch from one CPU to another at any time. This commit therefore uses try_invoke_on_locked_down_task() and checks for task_curr() in trc_inspect_reader_notrunning(). When this condition holds, the target task is running and cannot move. If CONFIG_TASKS_TRACE_RCU_READ_MB=y, the new rcu_dynticks_zero_in_eqs() function can be used to check if the specified integer (in this case, t->trc_reader_nesting) is zero while the target CPU remains in that same dyntick-idle sojourn. If so, the target task is in a quiescent state. If not, trc_read_check_handler() must indicate failure so that the grace-period kthread can take appropriate action or retry after an appropriate delay, as the case may be. With this change, given CONFIG_TASKS_TRACE_RCU_READ_MB=y, if a given CPU remains idle or a given task continues executing in nohz_full mode, the RCU tasks trace grace-period kthread will detect this without the need to send an IPI. Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-03-20 01:33:12 +03:00
/* Turn on heavyweight RCU tasks trace readers on idle/user entry. */
static void rcu_dynticks_task_trace_enter(void)
{
#ifdef CONFIG_TASKS_RCU_TRACE
if (IS_ENABLED(CONFIG_TASKS_TRACE_RCU_READ_MB))
current->trc_reader_special.b.need_mb = true;
#endif /* #ifdef CONFIG_TASKS_RCU_TRACE */
}
/* Turn off heavyweight RCU tasks trace readers on idle/user exit. */
static void rcu_dynticks_task_trace_exit(void)
{
#ifdef CONFIG_TASKS_RCU_TRACE
if (IS_ENABLED(CONFIG_TASKS_TRACE_RCU_READ_MB))
current->trc_reader_special.b.need_mb = false;
#endif /* #ifdef CONFIG_TASKS_RCU_TRACE */
}