WSL2-Linux-Kernel/drivers/media/dvb-frontends/lnbh29.c

169 строки
3.7 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0
//
// Driver for LNB supply and control IC STMicroelectronics LNBH29
//
// Copyright (c) 2018 Socionext Inc.
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <media/dvb_frontend.h>
#include "lnbh29.h"
/**
* struct lnbh29_priv - LNBH29 driver private data
* @i2c: Pointer to the I2C adapter structure
* @i2c_address: I2C address of LNBH29 chip
* @config: Registers configuration
* offset 0: 1st register address, always 0x01 (DATA)
* offset 1: DATA register value
*/
struct lnbh29_priv {
struct i2c_adapter *i2c;
u8 i2c_address;
u8 config[2];
};
#define LNBH29_STATUS_OLF BIT(0)
#define LNBH29_STATUS_OTF BIT(1)
#define LNBH29_STATUS_VMON BIT(2)
#define LNBH29_STATUS_PNG BIT(3)
#define LNBH29_STATUS_PDO BIT(4)
#define LNBH29_VSEL_MASK GENMASK(2, 0)
#define LNBH29_VSEL_0 0x00
/* Min: 13.188V, Typ: 13.667V, Max:14V */
#define LNBH29_VSEL_13 0x03
/* Min: 18.158V, Typ: 18.817V, Max:19.475V */
#define LNBH29_VSEL_18 0x07
static int lnbh29_read_vmon(struct lnbh29_priv *priv)
{
u8 addr = 0x00;
u8 status[2];
int ret;
struct i2c_msg msg[2] = {
{
.addr = priv->i2c_address,
.flags = 0,
.len = 1,
.buf = &addr
}, {
.addr = priv->i2c_address,
.flags = I2C_M_RD,
.len = sizeof(status),
.buf = status
}
};
ret = i2c_transfer(priv->i2c, msg, 2);
if (ret >= 0 && ret != 2)
ret = -EIO;
if (ret < 0) {
dev_dbg(&priv->i2c->dev, "LNBH29 I2C transfer failed (%d)\n",
ret);
return ret;
}
if (status[0] & (LNBH29_STATUS_OLF | LNBH29_STATUS_VMON)) {
dev_err(&priv->i2c->dev,
"LNBH29 voltage in failure state, status reg 0x%x\n",
status[0]);
return -EIO;
}
return 0;
}
static int lnbh29_set_voltage(struct dvb_frontend *fe,
enum fe_sec_voltage voltage)
{
struct lnbh29_priv *priv = fe->sec_priv;
u8 data_reg;
int ret;
struct i2c_msg msg = {
.addr = priv->i2c_address,
.flags = 0,
.len = sizeof(priv->config),
.buf = priv->config
};
switch (voltage) {
case SEC_VOLTAGE_OFF:
data_reg = LNBH29_VSEL_0;
break;
case SEC_VOLTAGE_13:
data_reg = LNBH29_VSEL_13;
break;
case SEC_VOLTAGE_18:
data_reg = LNBH29_VSEL_18;
break;
default:
return -EINVAL;
}
priv->config[1] &= ~LNBH29_VSEL_MASK;
priv->config[1] |= data_reg;
ret = i2c_transfer(priv->i2c, &msg, 1);
if (ret >= 0 && ret != 1)
ret = -EIO;
if (ret < 0) {
dev_err(&priv->i2c->dev, "LNBH29 I2C transfer error (%d)\n",
ret);
return ret;
}
/* Soft-start time (Vout 0V to 18V) is Typ. 6ms. */
usleep_range(6000, 20000);
if (voltage == SEC_VOLTAGE_OFF)
return 0;
return lnbh29_read_vmon(priv);
}
static void lnbh29_release(struct dvb_frontend *fe)
{
lnbh29_set_voltage(fe, SEC_VOLTAGE_OFF);
kfree(fe->sec_priv);
fe->sec_priv = NULL;
}
struct dvb_frontend *lnbh29_attach(struct dvb_frontend *fe,
struct lnbh29_config *cfg,
struct i2c_adapter *i2c)
{
struct lnbh29_priv *priv;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
return NULL;
priv->i2c_address = (cfg->i2c_address >> 1);
priv->i2c = i2c;
priv->config[0] = 0x01;
priv->config[1] = cfg->data_config;
fe->sec_priv = priv;
if (lnbh29_set_voltage(fe, SEC_VOLTAGE_OFF)) {
dev_err(&i2c->dev, "no LNBH29 found at I2C addr 0x%02x\n",
priv->i2c_address);
kfree(priv);
fe->sec_priv = NULL;
return NULL;
}
fe->ops.release_sec = lnbh29_release;
fe->ops.set_voltage = lnbh29_set_voltage;
dev_info(&i2c->dev, "LNBH29 attached at I2C addr 0x%02x\n",
priv->i2c_address);
return fe;
}
EXPORT_SYMBOL(lnbh29_attach);
MODULE_AUTHOR("Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>");
MODULE_DESCRIPTION("STMicroelectronics LNBH29 driver");
MODULE_LICENSE("GPL v2");