microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/usb/core/phy.h

10 строки
356 B
C
Исходник Обычный вид История

usb: core: add a wrapper for the USB PHYs on the HCD Many SoC platforms have separate devices for the USB PHY which are registered through the generic PHY framework. These PHYs have to be enabled to make the USB controller actually work. They also have to be disabled again on shutdown/suspend. Currently (at least) the following HCI platform drivers are using custom code to obtain all PHYs via devicetree for the roothub/controller and disable/enable them when required: - ehci-platform.c has ehci_platform_power_{on,off} - xhci-mtk.c has xhci_mtk_phy_{init,exit,power_on,power_off} - ohci-platform.c has ohci_platform_power_{on,off} With this new wrapper the USB PHYs can be specified directly in the USB controller's devicetree node (just like on the drivers listed above). This allows SoCs like the Amlogic Meson GXL family to operate correctly once this is wired up correctly. These SoCs use a dwc3 controller and require all USB PHYs to be initialized (if one of the USB PHYs it not initialized then none of USB port works at all). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Yixun Lan <yixun.lan@amlogic.com> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Tested-by: Neil Armstrong <narmstrong@baylibre.con> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-04 00:43:04 +03:00
struct usb_phy_roothub;
usb: core: split usb_phy_roothub_{init,alloc} Before this patch usb_phy_roothub_init served two purposes (from a caller's point of view - like hcd.c): - parsing the PHYs and allocating the list entries - calling phy_init on each list entry While this worked so far it has one disadvantage: if we need to call phy_init for each PHY instance then the existing code cannot be re-used. Solve this by splitting off usb_phy_roothub_alloc which only parses the PHYs and allocates the list entries. usb_phy_roothub_init then gets a struct usb_phy_roothub and only calls phy_init on each PHY instance (along with the corresponding cleanup if that failed somewhere). This is a preparation step for adding proper suspend support for some hardware that requires phy_exit to be called during suspend and phy_init to be called during resume. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-18 22:39:47 +03:00
struct usb_phy_roothub *usb_phy_roothub_alloc(struct device *dev);
int usb_phy_roothub_init(struct usb_phy_roothub *phy_roothub);
usb: core: add a wrapper for the USB PHYs on the HCD Many SoC platforms have separate devices for the USB PHY which are registered through the generic PHY framework. These PHYs have to be enabled to make the USB controller actually work. They also have to be disabled again on shutdown/suspend. Currently (at least) the following HCI platform drivers are using custom code to obtain all PHYs via devicetree for the roothub/controller and disable/enable them when required: - ehci-platform.c has ehci_platform_power_{on,off} - xhci-mtk.c has xhci_mtk_phy_{init,exit,power_on,power_off} - ohci-platform.c has ohci_platform_power_{on,off} With this new wrapper the USB PHYs can be specified directly in the USB controller's devicetree node (just like on the drivers listed above). This allows SoCs like the Amlogic Meson GXL family to operate correctly once this is wired up correctly. These SoCs use a dwc3 controller and require all USB PHYs to be initialized (if one of the USB PHYs it not initialized then none of USB port works at all). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Yixun Lan <yixun.lan@amlogic.com> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Tested-by: Neil Armstrong <narmstrong@baylibre.con> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-04 00:43:04 +03:00
int usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub);
int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub);
void usb_phy_roothub_power_off(struct usb_phy_roothub *phy_roothub);