microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/include/linux/idle_inject.h

34 строки
932 B
C
Исходник Обычный вид История

powercap / idle_inject: Add an idle injection framework Initially, the cpu_cooling device for ARM was changed by adding a new policy inserting idle cycles. The intel_powerclamp driver does a similar action. Instead of implementing idle injections privately in the cpu_cooling device, move the idle injection code in a dedicated framework and give the opportunity to other frameworks to make use of it. The framework relies on the smpboot kthreads which handles via its main loop the common code for hotplugging and [un]parking. This code was previously tested with the cpu cooling device and went through several iterations. It results now in split code and API exported in the header file. It was tested with the cpu cooling device with success. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Rewrite of all comments ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-26 13:53:29 +03:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2018 Linaro Ltd
*
* Author: Daniel Lezcano <daniel.lezcano@linaro.org>
*
*/
#ifndef __IDLE_INJECT_H__
#define __IDLE_INJECT_H__
/* private idle injection device structure */
struct idle_inject_device;
struct idle_inject_device *idle_inject_register(struct cpumask *cpumask);
void idle_inject_unregister(struct idle_inject_device *ii_dev);
int idle_inject_start(struct idle_inject_device *ii_dev);
void idle_inject_stop(struct idle_inject_device *ii_dev);
void idle_inject_set_duration(struct idle_inject_device *ii_dev,
powercap: idle_inject: Use higher resolution for idle injection The resolution of the idle injection is limited to 1ms. If there is a need for an injection of 1.2 ms, it is not possible. The idle injection API is not yet used, so it is safe to convert the existing API to the new time unit instead of adding more functions. Convert to microsecond in order to use a finer grain time unit when injecting idle cycles. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-02 20:34:24 +03:00
unsigned int run_duration_us,
unsigned int idle_duration_us);
powercap / idle_inject: Add an idle injection framework Initially, the cpu_cooling device for ARM was changed by adding a new policy inserting idle cycles. The intel_powerclamp driver does a similar action. Instead of implementing idle injections privately in the cpu_cooling device, move the idle injection code in a dedicated framework and give the opportunity to other frameworks to make use of it. The framework relies on the smpboot kthreads which handles via its main loop the common code for hotplugging and [un]parking. This code was previously tested with the cpu cooling device and went through several iterations. It results now in split code and API exported in the header file. It was tested with the cpu cooling device with success. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Rewrite of all comments ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-26 13:53:29 +03:00
void idle_inject_get_duration(struct idle_inject_device *ii_dev,
powercap: idle_inject: Use higher resolution for idle injection The resolution of the idle injection is limited to 1ms. If there is a need for an injection of 1.2 ms, it is not possible. The idle injection API is not yet used, so it is safe to convert the existing API to the new time unit instead of adding more functions. Convert to microsecond in order to use a finer grain time unit when injecting idle cycles. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-02 20:34:24 +03:00
unsigned int *run_duration_us,
unsigned int *idle_duration_us);
powercap/drivers/idle_inject: Specify idle state max latency Currently the idle injection framework uses the play_idle() function which puts the current CPU in an idle state. The idle state is the deepest one, as specified by the latency constraint when calling the subsequent play_idle_precise() function with the INT_MAX. The idle_injection is used by the cpuidle_cooling device which computes the idle / run duration to mitigate the temperature by injecting idle cycles. The cooling device has no control on the depth of the idle state. Allow finer control of the idle injection mechanism by allowing to specify the latency for the idle state. Thus the cooling device has the ability to have a guarantee on the exit latency of the idle states it is injecting. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/20200429103644.5492-1-daniel.lezcano@linaro.org
2020-04-29 13:36:39 +03:00
void idle_inject_set_latency(struct idle_inject_device *ii_dev,
thermal/idle_inject: Fix comment of idle_duration_us and name of latency_ns The comment of idle_duration_us and the name of latency_ns can be misleading, so fix them. Signed-off-by: zhuguangqing <zhuguangqing@xiaomi.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200917073553.898-1-zhuguangqing83@gmail.com
2020-09-17 10:35:53 +03:00
unsigned int latency_us);
powercap/drivers/idle_inject: Specify idle state max latency Currently the idle injection framework uses the play_idle() function which puts the current CPU in an idle state. The idle state is the deepest one, as specified by the latency constraint when calling the subsequent play_idle_precise() function with the INT_MAX. The idle_injection is used by the cpuidle_cooling device which computes the idle / run duration to mitigate the temperature by injecting idle cycles. The cooling device has no control on the depth of the idle state. Allow finer control of the idle injection mechanism by allowing to specify the latency for the idle state. Thus the cooling device has the ability to have a guarantee on the exit latency of the idle states it is injecting. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/20200429103644.5492-1-daniel.lezcano@linaro.org
2020-04-29 13:36:39 +03:00
powercap / idle_inject: Add an idle injection framework Initially, the cpu_cooling device for ARM was changed by adding a new policy inserting idle cycles. The intel_powerclamp driver does a similar action. Instead of implementing idle injections privately in the cpu_cooling device, move the idle injection code in a dedicated framework and give the opportunity to other frameworks to make use of it. The framework relies on the smpboot kthreads which handles via its main loop the common code for hotplugging and [un]parking. This code was previously tested with the cpu cooling device and went through several iterations. It results now in split code and API exported in the header file. It was tested with the cpu cooling device with success. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Rewrite of all comments ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-26 13:53:29 +03:00
#endif /* __IDLE_INJECT_H__ */