microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/arch/m68k/68000/entry.S

241 строка
5.5 KiB
ArmAsm
Исходник Обычный вид История

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/*
m68k: fix crufty 68000 and 68360 intro comments Quite a few of the non-mmu specific support files have a pathname in the title comments of the file. These files have moved around a bit over the years, and most are no longer accurate. Remove the pathname and fix the comments to include at least a short description of the files contents. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2014-08-21 16:10:31 +04:00
* entry.S -- non-mmu 68000 interrupt and exception entry points
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file README.legal in the main directory of this archive
* for more details.
*
* Linux/m68k support by Hamish Macdonald
*/
#include <linux/linkage.h>
#include <asm/thread_info.h>
#include <asm/unistd.h>
#include <asm/errno.h>
#include <asm/setup.h>
#include <asm/traps.h>
#include <asm/asm-offsets.h>
#include <asm/entry.h>
.text
.globl system_call
.globl resume
.globl ret_from_exception
.globl sys_call_table
.globl bad_interrupt
.globl inthandler1
.globl inthandler2
.globl inthandler3
.globl inthandler4
.globl inthandler5
.globl inthandler6
.globl inthandler7
badsys:
m68knommu: fix rename of pt_regs offset defines breakage Commit f159ee782990aacb5494738c98f13a2aa61dbb4a ("locking, m68k/asm-offsets: Rename pt_regs offset defines") breaks the m68knommu entry code that relies on these define names. Fix the files to match the new define names. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-20 15:32:32 +04:00
movel #-ENOSYS,%sp@(PT_OFF_D0)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
jra ret_from_exception
do_trace:
m68knommu: whitespace cleanup in 68328/entry.S Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-08-17 20:52:39 +04:00
movel #-ENOSYS,%sp@(PT_OFF_D0) /* needed for strace*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
subql #4,%sp
SAVE_SWITCH_STACK
m68knommu: convert to using tracehook_report_syscall_* Break up syscall_trace() into separate entry and exit routines that use tracehook_report_syscall_entry() and tracehook_report_syscall_exit(). Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-10-22 09:12:34 +04:00
jbsr syscall_trace_enter
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
RESTORE_SWITCH_STACK
addql #4,%sp
m68knommu: fix rename of pt_regs offset defines breakage Commit f159ee782990aacb5494738c98f13a2aa61dbb4a ("locking, m68k/asm-offsets: Rename pt_regs offset defines") breaks the m68knommu entry code that relies on these define names. Fix the files to match the new define names. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-20 15:32:32 +04:00
movel %sp@(PT_OFF_ORIG_D0),%d1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
movel #-ENOSYS,%d0
cmpl #NR_syscalls,%d1
jcc 1f
lsl #2,%d1
lea sys_call_table, %a0
jbsr %a0@(%d1)
m68knommu: whitespace cleanup in 68328/entry.S Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-08-17 20:52:39 +04:00
1: movel %d0,%sp@(PT_OFF_D0) /* save the return value */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
subql #4,%sp /* dummy return address */
SAVE_SWITCH_STACK
m68knommu: convert to using tracehook_report_syscall_* Break up syscall_trace() into separate entry and exit routines that use tracehook_report_syscall_entry() and tracehook_report_syscall_exit(). Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-10-22 09:12:34 +04:00
jbsr syscall_trace_leave
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
RESTORE_SWITCH_STACK
addql #4,%sp
jra ret_from_exception
ENTRY(system_call)
m68k: merge mmu and non-mmu include/asm/entry.h files The changes in the mmu version of entry.h (entry_mm.h) and the non-mmu version (entry_no.h) are not about the presence or use of an MMU at all. The main changes are to support the ColdFire processors. The code for trap entry and exit for all types of 68k processor outside coldfire is the same. So merge the files back to a single entry.h and share the common 68k entry/exit code. Some changes are required for the non-mmu entry handlers to adopt the differing macros for system call and interrupt entry, but this is quite strait forward. The changes for the ColdFire remove a couple of instructions for the separate a7 register case, and are no worse for the older single a7 register case. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-06-22 07:50:44 +04:00
SAVE_ALL_SYS
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/* save top of frame*/
m68knommu: whitespace cleanup in 68328/entry.S Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-08-17 20:52:39 +04:00
pea %sp@
jbsr set_esp0
addql #4,%sp
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
m68knommu: fix rename of pt_regs offset defines breakage Commit f159ee782990aacb5494738c98f13a2aa61dbb4a ("locking, m68k/asm-offsets: Rename pt_regs offset defines") breaks the m68knommu entry code that relies on these define names. Fix the files to match the new define names. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-09-20 15:32:32 +04:00
movel %sp@(PT_OFF_ORIG_D0),%d0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
movel %sp,%d1 /* get thread_info pointer */
[PATCH] m68knommu: use THREAD_SIZE instead of hard coded size Use the THREAD_SIZE define when manipulating the stack instead of hard coded values (for the 68328 and 68360 sub-architectures). Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02 04:42:52 +04:00
andl #-THREAD_SIZE,%d1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
movel %d1,%a2
m68k: merge mmu and non-mmu versions of asm-offsets.c It is strait forward to merge the mmu and non-mmu versions of asm-offstes.c. Some name changes are required for the preempt and thread_info.flags in the non-mmu entry.S assembler to make them consistent for both setups. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-29 09:55:36 +04:00
btst #(TIF_SYSCALL_TRACE%8),%a2@(TINFO_FLAGS+(31-TIF_SYSCALL_TRACE)/8)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
jne do_trace
cmpl #NR_syscalls,%d0
jcc badsys
lsl #2,%d0
lea sys_call_table,%a0
movel %a0@(%d0), %a0
jbsr %a0@
m68knommu: whitespace cleanup in 68328/entry.S Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-08-17 20:52:39 +04:00
movel %d0,%sp@(PT_OFF_D0) /* save the return value*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ret_from_exception:
m68knommu: whitespace cleanup in 68328/entry.S Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-08-17 20:52:39 +04:00
btst #5,%sp@(PT_OFF_SR) /* check if returning to kernel*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
jeq Luser_return /* if so, skip resched, signals*/
Lkernel_return:
RESTORE_ALL
Luser_return:
/* only allow interrupts when we are really the last one on the*/
/* kernel stack, otherwise stack overflow can occur during*/
/* heavy interrupt load*/
andw #ALLOWINT,%sr
movel %sp,%d1 /* get thread_info pointer */
[PATCH] m68knommu: use THREAD_SIZE instead of hard coded size Use the THREAD_SIZE define when manipulating the stack instead of hard coded values (for the 68328 and 68360 sub-architectures). Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02 04:42:52 +04:00
andl #-THREAD_SIZE,%d1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
movel %d1,%a2
m68knommu: Handle multiple pending signals we shouldn't bugger off to userland when there still are pending signals; among other things it makes e.g. SIGSEGV triggered by failure to build a sigframe to be delivered _now_ and not when we hit the next syscall or interrupt. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-10-12 07:29:28 +04:00
1:
m68k: merge mmu and non-mmu versions of asm-offsets.c It is strait forward to merge the mmu and non-mmu versions of asm-offstes.c. Some name changes are required for the preempt and thread_info.flags in the non-mmu entry.S assembler to make them consistent for both setups. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-29 09:55:36 +04:00
move %a2@(TINFO_FLAGS),%d1 /* thread_info->flags */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
jne Lwork_to_do
RESTORE_ALL
Lwork_to_do:
m68k: merge mmu and non-mmu versions of asm-offsets.c It is strait forward to merge the mmu and non-mmu versions of asm-offstes.c. Some name changes are required for the preempt and thread_info.flags in the non-mmu entry.S assembler to make them consistent for both setups. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-29 09:55:36 +04:00
movel %a2@(TINFO_FLAGS),%d1 /* thread_info->flags */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
btst #TIF_NEED_RESCHED,%d1
jne reschedule
Lsignal_return:
subql #4,%sp /* dummy return address*/
SAVE_SWITCH_STACK
pea %sp@(SWITCH_STACK_SIZE)
m68k: add TIF_NOTIFY_RESUME and handle it. TIF_NOTIFY_RESUME added (as bit 5). That way nommu glue needs no changes at all; mmu one needs just to replace jmi do_signal_return to jne do_signal_return There we have flags shifted up, until bit 6 (SIGPENDING) is in MSBit; instead of checking that MSBit is set (jmi) we check that MSBit or something below it is set (jne); bits 0..4 are never set, so that's precisely "bit 6 or bit 5 is set". Usual handling of NOTIFY_RESUME/SIGPENDING is done in do_notify_resume(); glue calls it instead of do_signal(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-04-24 09:46:23 +04:00
bsrw do_notify_resume
m68knommu: Switch to saner sigsuspend Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-10-12 01:09:20 +04:00
addql #4,%sp
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
RESTORE_SWITCH_STACK
addql #4,%sp
m68knommu: Handle multiple pending signals we shouldn't bugger off to userland when there still are pending signals; among other things it makes e.g. SIGSEGV triggered by failure to build a sigframe to be delivered _now_ and not when we hit the next syscall or interrupt. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-10-12 07:29:28 +04:00
jra 1b
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/*
* This is the main interrupt handler, responsible for calling process_int()
*/
inthandler1:
m68k: merge mmu and non-mmu include/asm/entry.h files The changes in the mmu version of entry.h (entry_mm.h) and the non-mmu version (entry_no.h) are not about the presence or use of an MMU at all. The main changes are to support the ColdFire processors. The code for trap entry and exit for all types of 68k processor outside coldfire is the same. So merge the files back to a single entry.h and share the common 68k entry/exit code. Some changes are required for the non-mmu entry handlers to adopt the differing macros for system call and interrupt entry, but this is quite strait forward. The changes for the ColdFire remove a couple of instructions for the separate a7 register case, and are no worse for the older single a7 register case. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-06-22 07:50:44 +04:00
SAVE_ALL_INT
m68knommu: rename PT_OFF_VECTOR to PT_OFF_FORMATVEC. In m68k/m68knommu assembly files, the same value is called sometimes PT_OFF_VECTOR, but more frequently PT_OFF_FORMATVEC. Standardize name to PT_OFF_FORMATVEC. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-08-30 15:17:17 +04:00
movew %sp@(PT_OFF_FORMATVEC), %d0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
and #0x3ff, %d0
movel %sp,%sp@-
movel #65,%sp@- /* put vector # on stack*/
jbsr process_int /* process the IRQ*/
3: addql #8,%sp /* pop parameters off stack*/
m68k: Simplify low level interrupt handling code The low level interrupt entry code of m68k contains the following: add_preempt_count(HARDIRQ_OFFSET); do_IRQ(); irq_enter(); add_preempt_count(HARDIRQ_OFFSET); handle_interrupt(); irq_exit(); sub_preempt_count(HARDIRQ_OFFSET); if (in_interrupt()) return; <---- On m68k always taken! if (local_softirq_pending()) do_softirq(); sub_preempt_count(HARDIRQ_OFFSET); if (in_hardirq()) return; if (status_on_stack_has_interrupt_priority_mask > 0) return; if (local_softirq_pending()) do_softirq(); ret_from_exception: if (interrupted_context_is_kernel) return: .... I tried to find a proper explanation for this, but the changelog is sparse and there are no mails explaining it further. But obviously this relates to the interrupt priority levels of the m68k and tries to be extra clever with nested interrupts. Though this cleverness just adds code bloat to the interrupt hotpath. For the common case of non nested interrupts the code runs through two extra conditionals to the only important one, which checks whether the return is to kernel or user space. For the nested case the checks for in_hardirq() and the priority mask value on stack catch only the case where the nested interrupt happens inside the hard irq context of the first interrupt. If the nested interrupt happens while the first interrupt handles soft interrupts, then these extra checks buy nothing. The nested interrupt will fall through to the final kernel/user space return check at ret_from_exception. Changing the code flow in the following way: do_IRQ(); irq_enter(); add_preempt_count(HARDIRQ_OFFSET); handle_interrupt(); irq_exit(); sub_preempt_count(HARDIRQ_OFFSET); if (in_interrupt()) return; if (local_softirq_pending()) do_softirq(); ret_from_exception: if (interrupted_context_is_kernel) return: makes the region protected by the hardirq count slightly smaller and the softirq handling is invoked with a minimal deeper stack. But otherwise it's completely functional equivalent and saves 104 bytes of text in arch/m68k/kernel/entry.o. This modification allows us further to get rid of the limitations which m68k puts on the preempt_count layout, so we can make the preempt count bits completely generic. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Linux/m68k <linux-m68k@vger.kernel.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1311112052360.30673@ionos.tec.linutronix.de
2013-11-12 00:01:03 +04:00
bra ret_from_exception
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
inthandler2:
m68k: merge mmu and non-mmu include/asm/entry.h files The changes in the mmu version of entry.h (entry_mm.h) and the non-mmu version (entry_no.h) are not about the presence or use of an MMU at all. The main changes are to support the ColdFire processors. The code for trap entry and exit for all types of 68k processor outside coldfire is the same. So merge the files back to a single entry.h and share the common 68k entry/exit code. Some changes are required for the non-mmu entry handlers to adopt the differing macros for system call and interrupt entry, but this is quite strait forward. The changes for the ColdFire remove a couple of instructions for the separate a7 register case, and are no worse for the older single a7 register case. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-06-22 07:50:44 +04:00
SAVE_ALL_INT
m68knommu: rename PT_OFF_VECTOR to PT_OFF_FORMATVEC. In m68k/m68knommu assembly files, the same value is called sometimes PT_OFF_VECTOR, but more frequently PT_OFF_FORMATVEC. Standardize name to PT_OFF_FORMATVEC. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-08-30 15:17:17 +04:00
movew %sp@(PT_OFF_FORMATVEC), %d0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
and #0x3ff, %d0
movel %sp,%sp@-
movel #66,%sp@- /* put vector # on stack*/
jbsr process_int /* process the IRQ*/
3: addql #8,%sp /* pop parameters off stack*/
m68k: Simplify low level interrupt handling code The low level interrupt entry code of m68k contains the following: add_preempt_count(HARDIRQ_OFFSET); do_IRQ(); irq_enter(); add_preempt_count(HARDIRQ_OFFSET); handle_interrupt(); irq_exit(); sub_preempt_count(HARDIRQ_OFFSET); if (in_interrupt()) return; <---- On m68k always taken! if (local_softirq_pending()) do_softirq(); sub_preempt_count(HARDIRQ_OFFSET); if (in_hardirq()) return; if (status_on_stack_has_interrupt_priority_mask > 0) return; if (local_softirq_pending()) do_softirq(); ret_from_exception: if (interrupted_context_is_kernel) return: .... I tried to find a proper explanation for this, but the changelog is sparse and there are no mails explaining it further. But obviously this relates to the interrupt priority levels of the m68k and tries to be extra clever with nested interrupts. Though this cleverness just adds code bloat to the interrupt hotpath. For the common case of non nested interrupts the code runs through two extra conditionals to the only important one, which checks whether the return is to kernel or user space. For the nested case the checks for in_hardirq() and the priority mask value on stack catch only the case where the nested interrupt happens inside the hard irq context of the first interrupt. If the nested interrupt happens while the first interrupt handles soft interrupts, then these extra checks buy nothing. The nested interrupt will fall through to the final kernel/user space return check at ret_from_exception. Changing the code flow in the following way: do_IRQ(); irq_enter(); add_preempt_count(HARDIRQ_OFFSET); handle_interrupt(); irq_exit(); sub_preempt_count(HARDIRQ_OFFSET); if (in_interrupt()) return; if (local_softirq_pending()) do_softirq(); ret_from_exception: if (interrupted_context_is_kernel) return: makes the region protected by the hardirq count slightly smaller and the softirq handling is invoked with a minimal deeper stack. But otherwise it's completely functional equivalent and saves 104 bytes of text in arch/m68k/kernel/entry.o. This modification allows us further to get rid of the limitations which m68k puts on the preempt_count layout, so we can make the preempt count bits completely generic. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Linux/m68k <linux-m68k@vger.kernel.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1311112052360.30673@ionos.tec.linutronix.de
2013-11-12 00:01:03 +04:00
bra ret_from_exception
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
inthandler3:
m68k: merge mmu and non-mmu include/asm/entry.h files The changes in the mmu version of entry.h (entry_mm.h) and the non-mmu version (entry_no.h) are not about the presence or use of an MMU at all. The main changes are to support the ColdFire processors. The code for trap entry and exit for all types of 68k processor outside coldfire is the same. So merge the files back to a single entry.h and share the common 68k entry/exit code. Some changes are required for the non-mmu entry handlers to adopt the differing macros for system call and interrupt entry, but this is quite strait forward. The changes for the ColdFire remove a couple of instructions for the separate a7 register case, and are no worse for the older single a7 register case. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-06-22 07:50:44 +04:00
SAVE_ALL_INT
m68knommu: rename PT_OFF_VECTOR to PT_OFF_FORMATVEC. In m68k/m68knommu assembly files, the same value is called sometimes PT_OFF_VECTOR, but more frequently PT_OFF_FORMATVEC. Standardize name to PT_OFF_FORMATVEC. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-08-30 15:17:17 +04:00
movew %sp@(PT_OFF_FORMATVEC), %d0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
and #0x3ff, %d0
movel %sp,%sp@-
movel #67,%sp@- /* put vector # on stack*/
jbsr process_int /* process the IRQ*/
3: addql #8,%sp /* pop parameters off stack*/
m68k: Simplify low level interrupt handling code The low level interrupt entry code of m68k contains the following: add_preempt_count(HARDIRQ_OFFSET); do_IRQ(); irq_enter(); add_preempt_count(HARDIRQ_OFFSET); handle_interrupt(); irq_exit(); sub_preempt_count(HARDIRQ_OFFSET); if (in_interrupt()) return; <---- On m68k always taken! if (local_softirq_pending()) do_softirq(); sub_preempt_count(HARDIRQ_OFFSET); if (in_hardirq()) return; if (status_on_stack_has_interrupt_priority_mask > 0) return; if (local_softirq_pending()) do_softirq(); ret_from_exception: if (interrupted_context_is_kernel) return: .... I tried to find a proper explanation for this, but the changelog is sparse and there are no mails explaining it further. But obviously this relates to the interrupt priority levels of the m68k and tries to be extra clever with nested interrupts. Though this cleverness just adds code bloat to the interrupt hotpath. For the common case of non nested interrupts the code runs through two extra conditionals to the only important one, which checks whether the return is to kernel or user space. For the nested case the checks for in_hardirq() and the priority mask value on stack catch only the case where the nested interrupt happens inside the hard irq context of the first interrupt. If the nested interrupt happens while the first interrupt handles soft interrupts, then these extra checks buy nothing. The nested interrupt will fall through to the final kernel/user space return check at ret_from_exception. Changing the code flow in the following way: do_IRQ(); irq_enter(); add_preempt_count(HARDIRQ_OFFSET); handle_interrupt(); irq_exit(); sub_preempt_count(HARDIRQ_OFFSET); if (in_interrupt()) return; if (local_softirq_pending()) do_softirq(); ret_from_exception: if (interrupted_context_is_kernel) return: makes the region protected by the hardirq count slightly smaller and the softirq handling is invoked with a minimal deeper stack. But otherwise it's completely functional equivalent and saves 104 bytes of text in arch/m68k/kernel/entry.o. This modification allows us further to get rid of the limitations which m68k puts on the preempt_count layout, so we can make the preempt count bits completely generic. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Linux/m68k <linux-m68k@vger.kernel.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1311112052360.30673@ionos.tec.linutronix.de
2013-11-12 00:01:03 +04:00
bra ret_from_exception
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
inthandler4:
m68k: merge mmu and non-mmu include/asm/entry.h files The changes in the mmu version of entry.h (entry_mm.h) and the non-mmu version (entry_no.h) are not about the presence or use of an MMU at all. The main changes are to support the ColdFire processors. The code for trap entry and exit for all types of 68k processor outside coldfire is the same. So merge the files back to a single entry.h and share the common 68k entry/exit code. Some changes are required for the non-mmu entry handlers to adopt the differing macros for system call and interrupt entry, but this is quite strait forward. The changes for the ColdFire remove a couple of instructions for the separate a7 register case, and are no worse for the older single a7 register case. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-06-22 07:50:44 +04:00
SAVE_ALL_INT
m68knommu: rename PT_OFF_VECTOR to PT_OFF_FORMATVEC. In m68k/m68knommu assembly files, the same value is called sometimes PT_OFF_VECTOR, but more frequently PT_OFF_FORMATVEC. Standardize name to PT_OFF_FORMATVEC. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-08-30 15:17:17 +04:00
movew %sp@(PT_OFF_FORMATVEC), %d0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
and #0x3ff, %d0
movel %sp,%sp@-
movel #68,%sp@- /* put vector # on stack*/
jbsr process_int /* process the IRQ*/
3: addql #8,%sp /* pop parameters off stack*/
m68k: Simplify low level interrupt handling code The low level interrupt entry code of m68k contains the following: add_preempt_count(HARDIRQ_OFFSET); do_IRQ(); irq_enter(); add_preempt_count(HARDIRQ_OFFSET); handle_interrupt(); irq_exit(); sub_preempt_count(HARDIRQ_OFFSET); if (in_interrupt()) return; <---- On m68k always taken! if (local_softirq_pending()) do_softirq(); sub_preempt_count(HARDIRQ_OFFSET); if (in_hardirq()) return; if (status_on_stack_has_interrupt_priority_mask > 0) return; if (local_softirq_pending()) do_softirq(); ret_from_exception: if (interrupted_context_is_kernel) return: .... I tried to find a proper explanation for this, but the changelog is sparse and there are no mails explaining it further. But obviously this relates to the interrupt priority levels of the m68k and tries to be extra clever with nested interrupts. Though this cleverness just adds code bloat to the interrupt hotpath. For the common case of non nested interrupts the code runs through two extra conditionals to the only important one, which checks whether the return is to kernel or user space. For the nested case the checks for in_hardirq() and the priority mask value on stack catch only the case where the nested interrupt happens inside the hard irq context of the first interrupt. If the nested interrupt happens while the first interrupt handles soft interrupts, then these extra checks buy nothing. The nested interrupt will fall through to the final kernel/user space return check at ret_from_exception. Changing the code flow in the following way: do_IRQ(); irq_enter(); add_preempt_count(HARDIRQ_OFFSET); handle_interrupt(); irq_exit(); sub_preempt_count(HARDIRQ_OFFSET); if (in_interrupt()) return; if (local_softirq_pending()) do_softirq(); ret_from_exception: if (interrupted_context_is_kernel) return: makes the region protected by the hardirq count slightly smaller and the softirq handling is invoked with a minimal deeper stack. But otherwise it's completely functional equivalent and saves 104 bytes of text in arch/m68k/kernel/entry.o. This modification allows us further to get rid of the limitations which m68k puts on the preempt_count layout, so we can make the preempt count bits completely generic. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Linux/m68k <linux-m68k@vger.kernel.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1311112052360.30673@ionos.tec.linutronix.de
2013-11-12 00:01:03 +04:00
bra ret_from_exception
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
inthandler5:
m68k: merge mmu and non-mmu include/asm/entry.h files The changes in the mmu version of entry.h (entry_mm.h) and the non-mmu version (entry_no.h) are not about the presence or use of an MMU at all. The main changes are to support the ColdFire processors. The code for trap entry and exit for all types of 68k processor outside coldfire is the same. So merge the files back to a single entry.h and share the common 68k entry/exit code. Some changes are required for the non-mmu entry handlers to adopt the differing macros for system call and interrupt entry, but this is quite strait forward. The changes for the ColdFire remove a couple of instructions for the separate a7 register case, and are no worse for the older single a7 register case. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-06-22 07:50:44 +04:00
SAVE_ALL_INT
m68knommu: rename PT_OFF_VECTOR to PT_OFF_FORMATVEC. In m68k/m68knommu assembly files, the same value is called sometimes PT_OFF_VECTOR, but more frequently PT_OFF_FORMATVEC. Standardize name to PT_OFF_FORMATVEC. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-08-30 15:17:17 +04:00
movew %sp@(PT_OFF_FORMATVEC), %d0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
and #0x3ff, %d0
movel %sp,%sp@-
movel #69,%sp@- /* put vector # on stack*/
jbsr process_int /* process the IRQ*/
3: addql #8,%sp /* pop parameters off stack*/
m68k: Simplify low level interrupt handling code The low level interrupt entry code of m68k contains the following: add_preempt_count(HARDIRQ_OFFSET); do_IRQ(); irq_enter(); add_preempt_count(HARDIRQ_OFFSET); handle_interrupt(); irq_exit(); sub_preempt_count(HARDIRQ_OFFSET); if (in_interrupt()) return; <---- On m68k always taken! if (local_softirq_pending()) do_softirq(); sub_preempt_count(HARDIRQ_OFFSET); if (in_hardirq()) return; if (status_on_stack_has_interrupt_priority_mask > 0) return; if (local_softirq_pending()) do_softirq(); ret_from_exception: if (interrupted_context_is_kernel) return: .... I tried to find a proper explanation for this, but the changelog is sparse and there are no mails explaining it further. But obviously this relates to the interrupt priority levels of the m68k and tries to be extra clever with nested interrupts. Though this cleverness just adds code bloat to the interrupt hotpath. For the common case of non nested interrupts the code runs through two extra conditionals to the only important one, which checks whether the return is to kernel or user space. For the nested case the checks for in_hardirq() and the priority mask value on stack catch only the case where the nested interrupt happens inside the hard irq context of the first interrupt. If the nested interrupt happens while the first interrupt handles soft interrupts, then these extra checks buy nothing. The nested interrupt will fall through to the final kernel/user space return check at ret_from_exception. Changing the code flow in the following way: do_IRQ(); irq_enter(); add_preempt_count(HARDIRQ_OFFSET); handle_interrupt(); irq_exit(); sub_preempt_count(HARDIRQ_OFFSET); if (in_interrupt()) return; if (local_softirq_pending()) do_softirq(); ret_from_exception: if (interrupted_context_is_kernel) return: makes the region protected by the hardirq count slightly smaller and the softirq handling is invoked with a minimal deeper stack. But otherwise it's completely functional equivalent and saves 104 bytes of text in arch/m68k/kernel/entry.o. This modification allows us further to get rid of the limitations which m68k puts on the preempt_count layout, so we can make the preempt count bits completely generic. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Linux/m68k <linux-m68k@vger.kernel.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1311112052360.30673@ionos.tec.linutronix.de
2013-11-12 00:01:03 +04:00
bra ret_from_exception
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
inthandler6:
m68k: merge mmu and non-mmu include/asm/entry.h files The changes in the mmu version of entry.h (entry_mm.h) and the non-mmu version (entry_no.h) are not about the presence or use of an MMU at all. The main changes are to support the ColdFire processors. The code for trap entry and exit for all types of 68k processor outside coldfire is the same. So merge the files back to a single entry.h and share the common 68k entry/exit code. Some changes are required for the non-mmu entry handlers to adopt the differing macros for system call and interrupt entry, but this is quite strait forward. The changes for the ColdFire remove a couple of instructions for the separate a7 register case, and are no worse for the older single a7 register case. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-06-22 07:50:44 +04:00
SAVE_ALL_INT
m68knommu: rename PT_OFF_VECTOR to PT_OFF_FORMATVEC. In m68k/m68knommu assembly files, the same value is called sometimes PT_OFF_VECTOR, but more frequently PT_OFF_FORMATVEC. Standardize name to PT_OFF_FORMATVEC. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-08-30 15:17:17 +04:00
movew %sp@(PT_OFF_FORMATVEC), %d0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
and #0x3ff, %d0
movel %sp,%sp@-
movel #70,%sp@- /* put vector # on stack*/
jbsr process_int /* process the IRQ*/
3: addql #8,%sp /* pop parameters off stack*/
m68k: Simplify low level interrupt handling code The low level interrupt entry code of m68k contains the following: add_preempt_count(HARDIRQ_OFFSET); do_IRQ(); irq_enter(); add_preempt_count(HARDIRQ_OFFSET); handle_interrupt(); irq_exit(); sub_preempt_count(HARDIRQ_OFFSET); if (in_interrupt()) return; <---- On m68k always taken! if (local_softirq_pending()) do_softirq(); sub_preempt_count(HARDIRQ_OFFSET); if (in_hardirq()) return; if (status_on_stack_has_interrupt_priority_mask > 0) return; if (local_softirq_pending()) do_softirq(); ret_from_exception: if (interrupted_context_is_kernel) return: .... I tried to find a proper explanation for this, but the changelog is sparse and there are no mails explaining it further. But obviously this relates to the interrupt priority levels of the m68k and tries to be extra clever with nested interrupts. Though this cleverness just adds code bloat to the interrupt hotpath. For the common case of non nested interrupts the code runs through two extra conditionals to the only important one, which checks whether the return is to kernel or user space. For the nested case the checks for in_hardirq() and the priority mask value on stack catch only the case where the nested interrupt happens inside the hard irq context of the first interrupt. If the nested interrupt happens while the first interrupt handles soft interrupts, then these extra checks buy nothing. The nested interrupt will fall through to the final kernel/user space return check at ret_from_exception. Changing the code flow in the following way: do_IRQ(); irq_enter(); add_preempt_count(HARDIRQ_OFFSET); handle_interrupt(); irq_exit(); sub_preempt_count(HARDIRQ_OFFSET); if (in_interrupt()) return; if (local_softirq_pending()) do_softirq(); ret_from_exception: if (interrupted_context_is_kernel) return: makes the region protected by the hardirq count slightly smaller and the softirq handling is invoked with a minimal deeper stack. But otherwise it's completely functional equivalent and saves 104 bytes of text in arch/m68k/kernel/entry.o. This modification allows us further to get rid of the limitations which m68k puts on the preempt_count layout, so we can make the preempt count bits completely generic. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Linux/m68k <linux-m68k@vger.kernel.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1311112052360.30673@ionos.tec.linutronix.de
2013-11-12 00:01:03 +04:00
bra ret_from_exception
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
inthandler7:
m68k: merge mmu and non-mmu include/asm/entry.h files The changes in the mmu version of entry.h (entry_mm.h) and the non-mmu version (entry_no.h) are not about the presence or use of an MMU at all. The main changes are to support the ColdFire processors. The code for trap entry and exit for all types of 68k processor outside coldfire is the same. So merge the files back to a single entry.h and share the common 68k entry/exit code. Some changes are required for the non-mmu entry handlers to adopt the differing macros for system call and interrupt entry, but this is quite strait forward. The changes for the ColdFire remove a couple of instructions for the separate a7 register case, and are no worse for the older single a7 register case. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-06-22 07:50:44 +04:00
SAVE_ALL_INT
m68knommu: rename PT_OFF_VECTOR to PT_OFF_FORMATVEC. In m68k/m68knommu assembly files, the same value is called sometimes PT_OFF_VECTOR, but more frequently PT_OFF_FORMATVEC. Standardize name to PT_OFF_FORMATVEC. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-08-30 15:17:17 +04:00
movew %sp@(PT_OFF_FORMATVEC), %d0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
and #0x3ff, %d0
movel %sp,%sp@-
movel #71,%sp@- /* put vector # on stack*/
jbsr process_int /* process the IRQ*/
3: addql #8,%sp /* pop parameters off stack*/
m68k: Simplify low level interrupt handling code The low level interrupt entry code of m68k contains the following: add_preempt_count(HARDIRQ_OFFSET); do_IRQ(); irq_enter(); add_preempt_count(HARDIRQ_OFFSET); handle_interrupt(); irq_exit(); sub_preempt_count(HARDIRQ_OFFSET); if (in_interrupt()) return; <---- On m68k always taken! if (local_softirq_pending()) do_softirq(); sub_preempt_count(HARDIRQ_OFFSET); if (in_hardirq()) return; if (status_on_stack_has_interrupt_priority_mask > 0) return; if (local_softirq_pending()) do_softirq(); ret_from_exception: if (interrupted_context_is_kernel) return: .... I tried to find a proper explanation for this, but the changelog is sparse and there are no mails explaining it further. But obviously this relates to the interrupt priority levels of the m68k and tries to be extra clever with nested interrupts. Though this cleverness just adds code bloat to the interrupt hotpath. For the common case of non nested interrupts the code runs through two extra conditionals to the only important one, which checks whether the return is to kernel or user space. For the nested case the checks for in_hardirq() and the priority mask value on stack catch only the case where the nested interrupt happens inside the hard irq context of the first interrupt. If the nested interrupt happens while the first interrupt handles soft interrupts, then these extra checks buy nothing. The nested interrupt will fall through to the final kernel/user space return check at ret_from_exception. Changing the code flow in the following way: do_IRQ(); irq_enter(); add_preempt_count(HARDIRQ_OFFSET); handle_interrupt(); irq_exit(); sub_preempt_count(HARDIRQ_OFFSET); if (in_interrupt()) return; if (local_softirq_pending()) do_softirq(); ret_from_exception: if (interrupted_context_is_kernel) return: makes the region protected by the hardirq count slightly smaller and the softirq handling is invoked with a minimal deeper stack. But otherwise it's completely functional equivalent and saves 104 bytes of text in arch/m68k/kernel/entry.o. This modification allows us further to get rid of the limitations which m68k puts on the preempt_count layout, so we can make the preempt count bits completely generic. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Linux/m68k <linux-m68k@vger.kernel.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1311112052360.30673@ionos.tec.linutronix.de
2013-11-12 00:01:03 +04:00
bra ret_from_exception
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
inthandler:
m68k: merge mmu and non-mmu include/asm/entry.h files The changes in the mmu version of entry.h (entry_mm.h) and the non-mmu version (entry_no.h) are not about the presence or use of an MMU at all. The main changes are to support the ColdFire processors. The code for trap entry and exit for all types of 68k processor outside coldfire is the same. So merge the files back to a single entry.h and share the common 68k entry/exit code. Some changes are required for the non-mmu entry handlers to adopt the differing macros for system call and interrupt entry, but this is quite strait forward. The changes for the ColdFire remove a couple of instructions for the separate a7 register case, and are no worse for the older single a7 register case. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-06-22 07:50:44 +04:00
SAVE_ALL_INT
m68knommu: rename PT_OFF_VECTOR to PT_OFF_FORMATVEC. In m68k/m68knommu assembly files, the same value is called sometimes PT_OFF_VECTOR, but more frequently PT_OFF_FORMATVEC. Standardize name to PT_OFF_FORMATVEC. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-08-30 15:17:17 +04:00
movew %sp@(PT_OFF_FORMATVEC), %d0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
and #0x3ff, %d0
movel %sp,%sp@-
movel %d0,%sp@- /* put vector # on stack*/
jbsr process_int /* process the IRQ*/
3: addql #8,%sp /* pop parameters off stack*/
m68k: Simplify low level interrupt handling code The low level interrupt entry code of m68k contains the following: add_preempt_count(HARDIRQ_OFFSET); do_IRQ(); irq_enter(); add_preempt_count(HARDIRQ_OFFSET); handle_interrupt(); irq_exit(); sub_preempt_count(HARDIRQ_OFFSET); if (in_interrupt()) return; <---- On m68k always taken! if (local_softirq_pending()) do_softirq(); sub_preempt_count(HARDIRQ_OFFSET); if (in_hardirq()) return; if (status_on_stack_has_interrupt_priority_mask > 0) return; if (local_softirq_pending()) do_softirq(); ret_from_exception: if (interrupted_context_is_kernel) return: .... I tried to find a proper explanation for this, but the changelog is sparse and there are no mails explaining it further. But obviously this relates to the interrupt priority levels of the m68k and tries to be extra clever with nested interrupts. Though this cleverness just adds code bloat to the interrupt hotpath. For the common case of non nested interrupts the code runs through two extra conditionals to the only important one, which checks whether the return is to kernel or user space. For the nested case the checks for in_hardirq() and the priority mask value on stack catch only the case where the nested interrupt happens inside the hard irq context of the first interrupt. If the nested interrupt happens while the first interrupt handles soft interrupts, then these extra checks buy nothing. The nested interrupt will fall through to the final kernel/user space return check at ret_from_exception. Changing the code flow in the following way: do_IRQ(); irq_enter(); add_preempt_count(HARDIRQ_OFFSET); handle_interrupt(); irq_exit(); sub_preempt_count(HARDIRQ_OFFSET); if (in_interrupt()) return; if (local_softirq_pending()) do_softirq(); ret_from_exception: if (interrupted_context_is_kernel) return: makes the region protected by the hardirq count slightly smaller and the softirq handling is invoked with a minimal deeper stack. But otherwise it's completely functional equivalent and saves 104 bytes of text in arch/m68k/kernel/entry.o. This modification allows us further to get rid of the limitations which m68k puts on the preempt_count layout, so we can make the preempt count bits completely generic. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Linux/m68k <linux-m68k@vger.kernel.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1311112052360.30673@ionos.tec.linutronix.de
2013-11-12 00:01:03 +04:00
bra ret_from_exception
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/*
* Handler for uninitialized and spurious interrupts.
*/
ENTRY(bad_interrupt)
m68k: Revive reporting of spurious interrupts commit 2502b667ea835ee16685c74b2a0d89ba8afe117a ("Change the m68knommu irq handling to use the generic irq framework.") removed the reporting of spurious interrupts on nommu (68328 and 68360). Bring it back in a generic way, using "atomic_t irq_err_count", as that's what most of the other architectures are using. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-07-13 22:29:24 +04:00
addql #1,irq_err_count
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
rte
/*
* Beware - when entering resume, prev (the current task) is
m68k: merge MMU and non MMU versions of system.h The non-MMU m68k targets can use the same asm/system.h as the MMU targets. So switch the current system_mm.h to be system.h and remove system_no.h. The assembly support code for the non-MMU resume functions needs to be modified to match the now common switch_to() macro. Specifically this means correctly saving and restoring the status flags in the case of the ColdFire resume, and some reordering of the code to not use registers before they are saved or after they are restored. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-05-05 16:32:12 +04:00
* in a0, next (the new task) is in a1, so don't change these
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
* registers until their contents are no longer needed.
*/
ENTRY(resume)
movel %a0,%d1 /* save prev thread in d1 */
movew %sr,%a0@(TASK_THREAD+THREAD_SR) /* save sr */
SAVE_SWITCH_STACK
movel %sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack */
m68k: merge MMU and non MMU versions of system.h The non-MMU m68k targets can use the same asm/system.h as the MMU targets. So switch the current system_mm.h to be system.h and remove system_no.h. The assembly support code for the non-MMU resume functions needs to be modified to match the now common switch_to() macro. Specifically this means correctly saving and restoring the status flags in the case of the ColdFire resume, and some reordering of the code to not use registers before they are saved or after they are restored. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-05-05 16:32:12 +04:00
movel %usp,%a3 /* save usp */
movel %a3,%a0@(TASK_THREAD+THREAD_USP)
movel %a1@(TASK_THREAD+THREAD_USP),%a3 /* restore user stack */
movel %a3,%usp
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
movel %a1@(TASK_THREAD+THREAD_KSP),%sp /* restore new thread stack */
RESTORE_SWITCH_STACK
movew %a1@(TASK_THREAD+THREAD_SR),%sr /* restore thread status reg */
rts