2011-03-23 02:33:58 +03:00
|
|
|
/*
|
|
|
|
* drivers/misc/spear13xx_pcie_gadget.c
|
|
|
|
*
|
|
|
|
* Copyright (C) 2010 ST Microelectronics
|
|
|
|
* Pratyush Anand<pratyush.anand@st.com>
|
|
|
|
*
|
|
|
|
* This file is licensed under the terms of the GNU General Public
|
|
|
|
* License version 2. This program is licensed "as is" without any
|
|
|
|
* warranty of any kind, whether express or implied.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/clk.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/io.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/irq.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/pci_regs.h>
|
|
|
|
#include <linux/configfs.h>
|
|
|
|
#include <mach/pcie.h>
|
|
|
|
#include <mach/misc_regs.h>
|
|
|
|
|
|
|
|
#define IN0_MEM_SIZE (200 * 1024 * 1024 - 1)
|
|
|
|
/* In current implementation address translation is done using IN0 only.
|
|
|
|
* So IN1 start address and IN0 end address has been kept same
|
|
|
|
*/
|
|
|
|
#define IN1_MEM_SIZE (0 * 1024 * 1024 - 1)
|
|
|
|
#define IN_IO_SIZE (20 * 1024 * 1024 - 1)
|
|
|
|
#define IN_CFG0_SIZE (12 * 1024 * 1024 - 1)
|
|
|
|
#define IN_CFG1_SIZE (12 * 1024 * 1024 - 1)
|
|
|
|
#define IN_MSG_SIZE (12 * 1024 * 1024 - 1)
|
|
|
|
/* Keep default BAR size as 4K*/
|
|
|
|
/* AORAM would be mapped by default*/
|
|
|
|
#define INBOUND_ADDR_MASK (SPEAR13XX_SYSRAM1_SIZE - 1)
|
|
|
|
|
|
|
|
#define INT_TYPE_NO_INT 0
|
|
|
|
#define INT_TYPE_INTX 1
|
|
|
|
#define INT_TYPE_MSI 2
|
|
|
|
struct spear_pcie_gadget_config {
|
|
|
|
void __iomem *base;
|
|
|
|
void __iomem *va_app_base;
|
|
|
|
void __iomem *va_dbi_base;
|
|
|
|
char int_type[10];
|
|
|
|
ulong requested_msi;
|
|
|
|
ulong configured_msi;
|
|
|
|
ulong bar0_size;
|
|
|
|
ulong bar0_rw_offset;
|
|
|
|
void __iomem *va_bar0_address;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct pcie_gadget_target {
|
|
|
|
struct configfs_subsystem subsys;
|
|
|
|
struct spear_pcie_gadget_config config;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct pcie_gadget_target_attr {
|
|
|
|
struct configfs_attribute attr;
|
|
|
|
ssize_t (*show)(struct spear_pcie_gadget_config *config,
|
|
|
|
char *buf);
|
|
|
|
ssize_t (*store)(struct spear_pcie_gadget_config *config,
|
|
|
|
const char *buf,
|
|
|
|
size_t count);
|
|
|
|
};
|
|
|
|
|
|
|
|
static void enable_dbi_access(struct pcie_app_reg __iomem *app_reg)
|
|
|
|
{
|
|
|
|
/* Enable DBI access */
|
|
|
|
writel(readl(&app_reg->slv_armisc) | (1 << AXI_OP_DBI_ACCESS_ID),
|
|
|
|
&app_reg->slv_armisc);
|
|
|
|
writel(readl(&app_reg->slv_awmisc) | (1 << AXI_OP_DBI_ACCESS_ID),
|
|
|
|
&app_reg->slv_awmisc);
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
static void disable_dbi_access(struct pcie_app_reg __iomem *app_reg)
|
|
|
|
{
|
|
|
|
/* disable DBI access */
|
|
|
|
writel(readl(&app_reg->slv_armisc) & ~(1 << AXI_OP_DBI_ACCESS_ID),
|
|
|
|
&app_reg->slv_armisc);
|
|
|
|
writel(readl(&app_reg->slv_awmisc) & ~(1 << AXI_OP_DBI_ACCESS_ID),
|
|
|
|
&app_reg->slv_awmisc);
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
static void spear_dbi_read_reg(struct spear_pcie_gadget_config *config,
|
|
|
|
int where, int size, u32 *val)
|
|
|
|
{
|
|
|
|
struct pcie_app_reg __iomem *app_reg = config->va_app_base;
|
|
|
|
ulong va_address;
|
|
|
|
|
|
|
|
/* Enable DBI access */
|
|
|
|
enable_dbi_access(app_reg);
|
|
|
|
|
|
|
|
va_address = (ulong)config->va_dbi_base + (where & ~0x3);
|
|
|
|
|
|
|
|
*val = readl(va_address);
|
|
|
|
|
|
|
|
if (size == 1)
|
|
|
|
*val = (*val >> (8 * (where & 3))) & 0xff;
|
|
|
|
else if (size == 2)
|
|
|
|
*val = (*val >> (8 * (where & 3))) & 0xffff;
|
|
|
|
|
|
|
|
/* Disable DBI access */
|
|
|
|
disable_dbi_access(app_reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void spear_dbi_write_reg(struct spear_pcie_gadget_config *config,
|
|
|
|
int where, int size, u32 val)
|
|
|
|
{
|
|
|
|
struct pcie_app_reg __iomem *app_reg = config->va_app_base;
|
|
|
|
ulong va_address;
|
|
|
|
|
|
|
|
/* Enable DBI access */
|
|
|
|
enable_dbi_access(app_reg);
|
|
|
|
|
|
|
|
va_address = (ulong)config->va_dbi_base + (where & ~0x3);
|
|
|
|
|
|
|
|
if (size == 4)
|
|
|
|
writel(val, va_address);
|
|
|
|
else if (size == 2)
|
|
|
|
writew(val, va_address + (where & 2));
|
|
|
|
else if (size == 1)
|
|
|
|
writeb(val, va_address + (where & 3));
|
|
|
|
|
|
|
|
/* Disable DBI access */
|
|
|
|
disable_dbi_access(app_reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
#define PCI_FIND_CAP_TTL 48
|
|
|
|
|
|
|
|
static int pci_find_own_next_cap_ttl(struct spear_pcie_gadget_config *config,
|
|
|
|
u32 pos, int cap, int *ttl)
|
|
|
|
{
|
|
|
|
u32 id;
|
|
|
|
|
|
|
|
while ((*ttl)--) {
|
|
|
|
spear_dbi_read_reg(config, pos, 1, &pos);
|
|
|
|
if (pos < 0x40)
|
|
|
|
break;
|
|
|
|
pos &= ~3;
|
|
|
|
spear_dbi_read_reg(config, pos + PCI_CAP_LIST_ID, 1, &id);
|
|
|
|
if (id == 0xff)
|
|
|
|
break;
|
|
|
|
if (id == cap)
|
|
|
|
return pos;
|
|
|
|
pos += PCI_CAP_LIST_NEXT;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pci_find_own_next_cap(struct spear_pcie_gadget_config *config,
|
|
|
|
u32 pos, int cap)
|
|
|
|
{
|
|
|
|
int ttl = PCI_FIND_CAP_TTL;
|
|
|
|
|
|
|
|
return pci_find_own_next_cap_ttl(config, pos, cap, &ttl);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pci_find_own_cap_start(struct spear_pcie_gadget_config *config,
|
|
|
|
u8 hdr_type)
|
|
|
|
{
|
|
|
|
u32 status;
|
|
|
|
|
|
|
|
spear_dbi_read_reg(config, PCI_STATUS, 2, &status);
|
|
|
|
if (!(status & PCI_STATUS_CAP_LIST))
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
switch (hdr_type) {
|
|
|
|
case PCI_HEADER_TYPE_NORMAL:
|
|
|
|
case PCI_HEADER_TYPE_BRIDGE:
|
|
|
|
return PCI_CAPABILITY_LIST;
|
|
|
|
case PCI_HEADER_TYPE_CARDBUS:
|
|
|
|
return PCI_CB_CAPABILITY_LIST;
|
|
|
|
default:
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Tell if a device supports a given PCI capability.
|
|
|
|
* Returns the address of the requested capability structure within the
|
|
|
|
* device's PCI configuration space or 0 in case the device does not
|
|
|
|
* support it. Possible values for @cap:
|
|
|
|
*
|
|
|
|
* %PCI_CAP_ID_PM Power Management
|
|
|
|
* %PCI_CAP_ID_AGP Accelerated Graphics Port
|
|
|
|
* %PCI_CAP_ID_VPD Vital Product Data
|
|
|
|
* %PCI_CAP_ID_SLOTID Slot Identification
|
|
|
|
* %PCI_CAP_ID_MSI Message Signalled Interrupts
|
|
|
|
* %PCI_CAP_ID_CHSWP CompactPCI HotSwap
|
|
|
|
* %PCI_CAP_ID_PCIX PCI-X
|
|
|
|
* %PCI_CAP_ID_EXP PCI Express
|
|
|
|
*/
|
|
|
|
static int pci_find_own_capability(struct spear_pcie_gadget_config *config,
|
|
|
|
int cap)
|
|
|
|
{
|
|
|
|
u32 pos;
|
|
|
|
u32 hdr_type;
|
|
|
|
|
|
|
|
spear_dbi_read_reg(config, PCI_HEADER_TYPE, 1, &hdr_type);
|
|
|
|
|
|
|
|
pos = pci_find_own_cap_start(config, hdr_type);
|
|
|
|
if (pos)
|
|
|
|
pos = pci_find_own_next_cap(config, pos, cap);
|
|
|
|
|
|
|
|
return pos;
|
|
|
|
}
|
|
|
|
|
|
|
|
static irqreturn_t spear_pcie_gadget_irq(int irq, void *dev_id)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* configfs interfaces show/store functions
|
|
|
|
*/
|
|
|
|
static ssize_t pcie_gadget_show_link(
|
|
|
|
struct spear_pcie_gadget_config *config,
|
|
|
|
char *buf)
|
|
|
|
{
|
|
|
|
struct pcie_app_reg __iomem *app_reg = config->va_app_base;
|
|
|
|
|
|
|
|
if (readl(&app_reg->app_status_1) & ((u32)1 << XMLH_LINK_UP_ID))
|
|
|
|
return sprintf(buf, "UP");
|
|
|
|
else
|
|
|
|
return sprintf(buf, "DOWN");
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t pcie_gadget_store_link(
|
|
|
|
struct spear_pcie_gadget_config *config,
|
|
|
|
const char *buf, size_t count)
|
|
|
|
{
|
|
|
|
struct pcie_app_reg __iomem *app_reg = config->va_app_base;
|
|
|
|
|
|
|
|
if (sysfs_streq(buf, "UP"))
|
|
|
|
writel(readl(&app_reg->app_ctrl_0) | (1 << APP_LTSSM_ENABLE_ID),
|
|
|
|
&app_reg->app_ctrl_0);
|
|
|
|
else if (sysfs_streq(buf, "DOWN"))
|
|
|
|
writel(readl(&app_reg->app_ctrl_0)
|
|
|
|
& ~(1 << APP_LTSSM_ENABLE_ID),
|
|
|
|
&app_reg->app_ctrl_0);
|
|
|
|
else
|
|
|
|
return -EINVAL;
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t pcie_gadget_show_int_type(
|
|
|
|
struct spear_pcie_gadget_config *config,
|
|
|
|
char *buf)
|
|
|
|
{
|
|
|
|
return sprintf(buf, "%s", config->int_type);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t pcie_gadget_store_int_type(
|
|
|
|
struct spear_pcie_gadget_config *config,
|
|
|
|
const char *buf, size_t count)
|
|
|
|
{
|
|
|
|
u32 cap, vec, flags;
|
|
|
|
ulong vector;
|
|
|
|
|
|
|
|
if (sysfs_streq(buf, "INTA"))
|
|
|
|
spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 1);
|
|
|
|
|
|
|
|
else if (sysfs_streq(buf, "MSI")) {
|
|
|
|
vector = config->requested_msi;
|
|
|
|
vec = 0;
|
|
|
|
while (vector > 1) {
|
|
|
|
vector /= 2;
|
|
|
|
vec++;
|
|
|
|
}
|
|
|
|
spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 0);
|
|
|
|
cap = pci_find_own_capability(config, PCI_CAP_ID_MSI);
|
|
|
|
spear_dbi_read_reg(config, cap + PCI_MSI_FLAGS, 1, &flags);
|
|
|
|
flags &= ~PCI_MSI_FLAGS_QMASK;
|
|
|
|
flags |= vec << 1;
|
|
|
|
spear_dbi_write_reg(config, cap + PCI_MSI_FLAGS, 1, flags);
|
|
|
|
} else
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
strcpy(config->int_type, buf);
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t pcie_gadget_show_no_of_msi(
|
|
|
|
struct spear_pcie_gadget_config *config,
|
|
|
|
char *buf)
|
|
|
|
{
|
|
|
|
struct pcie_app_reg __iomem *app_reg = config->va_app_base;
|
|
|
|
u32 cap, vec, flags;
|
|
|
|
ulong vector;
|
|
|
|
|
|
|
|
if ((readl(&app_reg->msg_status) & (1 << CFG_MSI_EN_ID))
|
|
|
|
!= (1 << CFG_MSI_EN_ID))
|
|
|
|
vector = 0;
|
|
|
|
else {
|
|
|
|
cap = pci_find_own_capability(config, PCI_CAP_ID_MSI);
|
|
|
|
spear_dbi_read_reg(config, cap + PCI_MSI_FLAGS, 1, &flags);
|
|
|
|
flags &= ~PCI_MSI_FLAGS_QSIZE;
|
|
|
|
vec = flags >> 4;
|
|
|
|
vector = 1;
|
|
|
|
while (vec--)
|
|
|
|
vector *= 2;
|
|
|
|
}
|
|
|
|
config->configured_msi = vector;
|
|
|
|
|
|
|
|
return sprintf(buf, "%lu", vector);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t pcie_gadget_store_no_of_msi(
|
|
|
|
struct spear_pcie_gadget_config *config,
|
|
|
|
const char *buf, size_t count)
|
|
|
|
{
|
|
|
|
if (strict_strtoul(buf, 0, &config->requested_msi))
|
|
|
|
return -EINVAL;
|
|
|
|
if (config->requested_msi > 32)
|
|
|
|
config->requested_msi = 32;
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t pcie_gadget_store_inta(
|
|
|
|
struct spear_pcie_gadget_config *config,
|
|
|
|
const char *buf, size_t count)
|
|
|
|
{
|
|
|
|
struct pcie_app_reg __iomem *app_reg = config->va_app_base;
|
|
|
|
ulong en;
|
|
|
|
|
|
|
|
if (strict_strtoul(buf, 0, &en))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (en)
|
|
|
|
writel(readl(&app_reg->app_ctrl_0) | (1 << SYS_INT_ID),
|
|
|
|
&app_reg->app_ctrl_0);
|
|
|
|
else
|
|
|
|
writel(readl(&app_reg->app_ctrl_0) & ~(1 << SYS_INT_ID),
|
|
|
|
&app_reg->app_ctrl_0);
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t pcie_gadget_store_send_msi(
|
|
|
|
struct spear_pcie_gadget_config *config,
|
|
|
|
const char *buf, size_t count)
|
|
|
|
{
|
|
|
|
struct pcie_app_reg __iomem *app_reg = config->va_app_base;
|
|
|
|
ulong vector;
|
|
|
|
u32 ven_msi;
|
|
|
|
|
|
|
|
if (strict_strtoul(buf, 0, &vector))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (!config->configured_msi)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (vector >= config->configured_msi)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
ven_msi = readl(&app_reg->ven_msi_1);
|
|
|
|
ven_msi &= ~VEN_MSI_FUN_NUM_MASK;
|
|
|
|
ven_msi |= 0 << VEN_MSI_FUN_NUM_ID;
|
|
|
|
ven_msi &= ~VEN_MSI_TC_MASK;
|
|
|
|
ven_msi |= 0 << VEN_MSI_TC_ID;
|
|
|
|
ven_msi &= ~VEN_MSI_VECTOR_MASK;
|
|
|
|
ven_msi |= vector << VEN_MSI_VECTOR_ID;
|
|
|
|
|
|
|
|
/* generating interrupt for msi vector */
|
|
|
|
ven_msi |= VEN_MSI_REQ_EN;
|
|
|
|
writel(ven_msi, &app_reg->ven_msi_1);
|
|
|
|
udelay(1);
|
|
|
|
ven_msi &= ~VEN_MSI_REQ_EN;
|
|
|
|
writel(ven_msi, &app_reg->ven_msi_1);
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t pcie_gadget_show_vendor_id(
|
|
|
|
struct spear_pcie_gadget_config *config,
|
|
|
|
char *buf)
|
|
|
|
{
|
|
|
|
u32 id;
|
|
|
|
|
|
|
|
spear_dbi_read_reg(config, PCI_VENDOR_ID, 2, &id);
|
|
|
|
|
|
|
|
return sprintf(buf, "%x", id);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t pcie_gadget_store_vendor_id(
|
|
|
|
struct spear_pcie_gadget_config *config,
|
|
|
|
const char *buf, size_t count)
|
|
|
|
{
|
|
|
|
ulong id;
|
|
|
|
|
|
|
|
if (strict_strtoul(buf, 0, &id))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
spear_dbi_write_reg(config, PCI_VENDOR_ID, 2, id);
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t pcie_gadget_show_device_id(
|
|
|
|
struct spear_pcie_gadget_config *config,
|
|
|
|
char *buf)
|
|
|
|
{
|
|
|
|
u32 id;
|
|
|
|
|
|
|
|
spear_dbi_read_reg(config, PCI_DEVICE_ID, 2, &id);
|
|
|
|
|
|
|
|
return sprintf(buf, "%x", id);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t pcie_gadget_store_device_id(
|
|
|
|
struct spear_pcie_gadget_config *config,
|
|
|
|
const char *buf, size_t count)
|
|
|
|
{
|
|
|
|
ulong id;
|
|
|
|
|
|
|
|
if (strict_strtoul(buf, 0, &id))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
spear_dbi_write_reg(config, PCI_DEVICE_ID, 2, id);
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t pcie_gadget_show_bar0_size(
|
|
|
|
struct spear_pcie_gadget_config *config,
|
|
|
|
char *buf)
|
|
|
|
{
|
|
|
|
return sprintf(buf, "%lx", config->bar0_size);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t pcie_gadget_store_bar0_size(
|
|
|
|
struct spear_pcie_gadget_config *config,
|
|
|
|
const char *buf, size_t count)
|
|
|
|
{
|
|
|
|
ulong size;
|
|
|
|
u32 pos, pos1;
|
|
|
|
u32 no_of_bit = 0;
|
|
|
|
|
|
|
|
if (strict_strtoul(buf, 0, &size))
|
|
|
|
return -EINVAL;
|
|
|
|
/* min bar size is 256 */
|
|
|
|
if (size <= 0x100)
|
|
|
|
size = 0x100;
|
|
|
|
/* max bar size is 1MB*/
|
|
|
|
else if (size >= 0x100000)
|
|
|
|
size = 0x100000;
|
|
|
|
else {
|
|
|
|
pos = 0;
|
|
|
|
pos1 = 0;
|
|
|
|
while (pos < 21) {
|
|
|
|
pos = find_next_bit((ulong *)&size, 21, pos);
|
|
|
|
if (pos != 21)
|
|
|
|
pos1 = pos + 1;
|
|
|
|
pos++;
|
|
|
|
no_of_bit++;
|
|
|
|
}
|
|
|
|
if (no_of_bit == 2)
|
|
|
|
pos1--;
|
|
|
|
|
|
|
|
size = 1 << pos1;
|
|
|
|
}
|
|
|
|
config->bar0_size = size;
|
|
|
|
spear_dbi_write_reg(config, PCIE_BAR0_MASK_REG, 4, size - 1);
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t pcie_gadget_show_bar0_address(
|
|
|
|
struct spear_pcie_gadget_config *config,
|
|
|
|
char *buf)
|
|
|
|
{
|
|
|
|
struct pcie_app_reg __iomem *app_reg = config->va_app_base;
|
|
|
|
|
|
|
|
u32 address = readl(&app_reg->pim0_mem_addr_start);
|
|
|
|
|
|
|
|
return sprintf(buf, "%x", address);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t pcie_gadget_store_bar0_address(
|
|
|
|
struct spear_pcie_gadget_config *config,
|
|
|
|
const char *buf, size_t count)
|
|
|
|
{
|
|
|
|
struct pcie_app_reg __iomem *app_reg = config->va_app_base;
|
|
|
|
ulong address;
|
|
|
|
|
|
|
|
if (strict_strtoul(buf, 0, &address))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
address &= ~(config->bar0_size - 1);
|
|
|
|
if (config->va_bar0_address)
|
|
|
|
iounmap(config->va_bar0_address);
|
|
|
|
config->va_bar0_address = ioremap(address, config->bar0_size);
|
|
|
|
if (!config->va_bar0_address)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
writel(address, &app_reg->pim0_mem_addr_start);
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t pcie_gadget_show_bar0_rw_offset(
|
|
|
|
struct spear_pcie_gadget_config *config,
|
|
|
|
char *buf)
|
|
|
|
{
|
|
|
|
return sprintf(buf, "%lx", config->bar0_rw_offset);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t pcie_gadget_store_bar0_rw_offset(
|
|
|
|
struct spear_pcie_gadget_config *config,
|
|
|
|
const char *buf, size_t count)
|
|
|
|
{
|
|
|
|
ulong offset;
|
|
|
|
|
|
|
|
if (strict_strtoul(buf, 0, &offset))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (offset % 4)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
config->bar0_rw_offset = offset;
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t pcie_gadget_show_bar0_data(
|
|
|
|
struct spear_pcie_gadget_config *config,
|
|
|
|
char *buf)
|
|
|
|
{
|
|
|
|
ulong data;
|
|
|
|
|
|
|
|
if (!config->va_bar0_address)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
data = readl((ulong)config->va_bar0_address + config->bar0_rw_offset);
|
|
|
|
|
|
|
|
return sprintf(buf, "%lx", data);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t pcie_gadget_store_bar0_data(
|
|
|
|
struct spear_pcie_gadget_config *config,
|
|
|
|
const char *buf, size_t count)
|
|
|
|
{
|
|
|
|
ulong data;
|
|
|
|
|
|
|
|
if (strict_strtoul(buf, 0, &data))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (!config->va_bar0_address)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
writel(data, (ulong)config->va_bar0_address + config->bar0_rw_offset);
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Attribute definitions.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define PCIE_GADGET_TARGET_ATTR_RO(_name) \
|
|
|
|
static struct pcie_gadget_target_attr pcie_gadget_target_##_name = \
|
|
|
|
__CONFIGFS_ATTR(_name, S_IRUGO, pcie_gadget_show_##_name, NULL)
|
|
|
|
|
|
|
|
#define PCIE_GADGET_TARGET_ATTR_WO(_name) \
|
|
|
|
static struct pcie_gadget_target_attr pcie_gadget_target_##_name = \
|
|
|
|
__CONFIGFS_ATTR(_name, S_IWUSR, NULL, pcie_gadget_store_##_name)
|
|
|
|
|
|
|
|
#define PCIE_GADGET_TARGET_ATTR_RW(_name) \
|
|
|
|
static struct pcie_gadget_target_attr pcie_gadget_target_##_name = \
|
|
|
|
__CONFIGFS_ATTR(_name, S_IRUGO | S_IWUSR, pcie_gadget_show_##_name, \
|
|
|
|
pcie_gadget_store_##_name)
|
|
|
|
PCIE_GADGET_TARGET_ATTR_RW(link);
|
|
|
|
PCIE_GADGET_TARGET_ATTR_RW(int_type);
|
|
|
|
PCIE_GADGET_TARGET_ATTR_RW(no_of_msi);
|
|
|
|
PCIE_GADGET_TARGET_ATTR_WO(inta);
|
|
|
|
PCIE_GADGET_TARGET_ATTR_WO(send_msi);
|
|
|
|
PCIE_GADGET_TARGET_ATTR_RW(vendor_id);
|
|
|
|
PCIE_GADGET_TARGET_ATTR_RW(device_id);
|
|
|
|
PCIE_GADGET_TARGET_ATTR_RW(bar0_size);
|
|
|
|
PCIE_GADGET_TARGET_ATTR_RW(bar0_address);
|
|
|
|
PCIE_GADGET_TARGET_ATTR_RW(bar0_rw_offset);
|
|
|
|
PCIE_GADGET_TARGET_ATTR_RW(bar0_data);
|
|
|
|
|
|
|
|
static struct configfs_attribute *pcie_gadget_target_attrs[] = {
|
|
|
|
&pcie_gadget_target_link.attr,
|
|
|
|
&pcie_gadget_target_int_type.attr,
|
|
|
|
&pcie_gadget_target_no_of_msi.attr,
|
|
|
|
&pcie_gadget_target_inta.attr,
|
|
|
|
&pcie_gadget_target_send_msi.attr,
|
|
|
|
&pcie_gadget_target_vendor_id.attr,
|
|
|
|
&pcie_gadget_target_device_id.attr,
|
|
|
|
&pcie_gadget_target_bar0_size.attr,
|
|
|
|
&pcie_gadget_target_bar0_address.attr,
|
|
|
|
&pcie_gadget_target_bar0_rw_offset.attr,
|
|
|
|
&pcie_gadget_target_bar0_data.attr,
|
|
|
|
NULL,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct pcie_gadget_target *to_target(struct config_item *item)
|
|
|
|
{
|
|
|
|
return item ?
|
|
|
|
container_of(to_configfs_subsystem(to_config_group(item)),
|
|
|
|
struct pcie_gadget_target, subsys) : NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Item operations and type for pcie_gadget_target.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static ssize_t pcie_gadget_target_attr_show(struct config_item *item,
|
|
|
|
struct configfs_attribute *attr,
|
|
|
|
char *buf)
|
|
|
|
{
|
|
|
|
ssize_t ret = -EINVAL;
|
|
|
|
struct pcie_gadget_target *target = to_target(item);
|
|
|
|
struct pcie_gadget_target_attr *t_attr =
|
|
|
|
container_of(attr, struct pcie_gadget_target_attr, attr);
|
|
|
|
|
|
|
|
if (t_attr->show)
|
|
|
|
ret = t_attr->show(&target->config, buf);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t pcie_gadget_target_attr_store(struct config_item *item,
|
|
|
|
struct configfs_attribute *attr,
|
|
|
|
const char *buf,
|
|
|
|
size_t count)
|
|
|
|
{
|
|
|
|
ssize_t ret = -EINVAL;
|
|
|
|
struct pcie_gadget_target *target = to_target(item);
|
|
|
|
struct pcie_gadget_target_attr *t_attr =
|
|
|
|
container_of(attr, struct pcie_gadget_target_attr, attr);
|
|
|
|
|
|
|
|
if (t_attr->store)
|
|
|
|
ret = t_attr->store(&target->config, buf, count);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct configfs_item_operations pcie_gadget_target_item_ops = {
|
|
|
|
.show_attribute = pcie_gadget_target_attr_show,
|
|
|
|
.store_attribute = pcie_gadget_target_attr_store,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct config_item_type pcie_gadget_target_type = {
|
|
|
|
.ct_attrs = pcie_gadget_target_attrs,
|
|
|
|
.ct_item_ops = &pcie_gadget_target_item_ops,
|
|
|
|
.ct_owner = THIS_MODULE,
|
|
|
|
};
|
|
|
|
|
|
|
|
static void spear13xx_pcie_device_init(struct spear_pcie_gadget_config *config)
|
|
|
|
{
|
|
|
|
struct pcie_app_reg __iomem *app_reg = config->va_app_base;
|
|
|
|
|
|
|
|
/*setup registers for outbound translation */
|
|
|
|
|
|
|
|
writel(config->base, &app_reg->in0_mem_addr_start);
|
|
|
|
writel(app_reg->in0_mem_addr_start + IN0_MEM_SIZE,
|
|
|
|
&app_reg->in0_mem_addr_limit);
|
|
|
|
writel(app_reg->in0_mem_addr_limit + 1, &app_reg->in1_mem_addr_start);
|
|
|
|
writel(app_reg->in1_mem_addr_start + IN1_MEM_SIZE,
|
|
|
|
&app_reg->in1_mem_addr_limit);
|
|
|
|
writel(app_reg->in1_mem_addr_limit + 1, &app_reg->in_io_addr_start);
|
|
|
|
writel(app_reg->in_io_addr_start + IN_IO_SIZE,
|
|
|
|
&app_reg->in_io_addr_limit);
|
|
|
|
writel(app_reg->in_io_addr_limit + 1, &app_reg->in_cfg0_addr_start);
|
|
|
|
writel(app_reg->in_cfg0_addr_start + IN_CFG0_SIZE,
|
|
|
|
&app_reg->in_cfg0_addr_limit);
|
|
|
|
writel(app_reg->in_cfg0_addr_limit + 1, &app_reg->in_cfg1_addr_start);
|
|
|
|
writel(app_reg->in_cfg1_addr_start + IN_CFG1_SIZE,
|
|
|
|
&app_reg->in_cfg1_addr_limit);
|
|
|
|
writel(app_reg->in_cfg1_addr_limit + 1, &app_reg->in_msg_addr_start);
|
|
|
|
writel(app_reg->in_msg_addr_start + IN_MSG_SIZE,
|
|
|
|
&app_reg->in_msg_addr_limit);
|
|
|
|
|
|
|
|
writel(app_reg->in0_mem_addr_start, &app_reg->pom0_mem_addr_start);
|
|
|
|
writel(app_reg->in1_mem_addr_start, &app_reg->pom1_mem_addr_start);
|
|
|
|
writel(app_reg->in_io_addr_start, &app_reg->pom_io_addr_start);
|
|
|
|
|
|
|
|
/*setup registers for inbound translation */
|
|
|
|
|
|
|
|
/* Keep AORAM mapped at BAR0 as default */
|
|
|
|
config->bar0_size = INBOUND_ADDR_MASK + 1;
|
|
|
|
spear_dbi_write_reg(config, PCIE_BAR0_MASK_REG, 4, INBOUND_ADDR_MASK);
|
|
|
|
spear_dbi_write_reg(config, PCI_BASE_ADDRESS_0, 4, 0xC);
|
|
|
|
config->va_bar0_address = ioremap(SPEAR13XX_SYSRAM1_BASE,
|
|
|
|
config->bar0_size);
|
|
|
|
|
|
|
|
writel(SPEAR13XX_SYSRAM1_BASE, &app_reg->pim0_mem_addr_start);
|
|
|
|
writel(0, &app_reg->pim1_mem_addr_start);
|
|
|
|
writel(INBOUND_ADDR_MASK + 1, &app_reg->mem0_addr_offset_limit);
|
|
|
|
|
|
|
|
writel(0x0, &app_reg->pim_io_addr_start);
|
|
|
|
writel(0x0, &app_reg->pim_io_addr_start);
|
|
|
|
writel(0x0, &app_reg->pim_rom_addr_start);
|
|
|
|
|
|
|
|
writel(DEVICE_TYPE_EP | (1 << MISCTRL_EN_ID)
|
|
|
|
| ((u32)1 << REG_TRANSLATION_ENABLE),
|
|
|
|
&app_reg->app_ctrl_0);
|
|
|
|
/* disable all rx interrupts */
|
|
|
|
writel(0, &app_reg->int_mask);
|
|
|
|
|
|
|
|
/* Select INTA as default*/
|
|
|
|
spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devinit spear_pcie_gadget_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct resource *res0, *res1;
|
|
|
|
unsigned int status = 0;
|
|
|
|
int irq;
|
|
|
|
struct clk *clk;
|
|
|
|
static struct pcie_gadget_target *target;
|
|
|
|
struct spear_pcie_gadget_config *config;
|
|
|
|
struct config_item *cg_item;
|
|
|
|
struct configfs_subsystem *subsys;
|
|
|
|
|
|
|
|
/* get resource for application registers*/
|
|
|
|
|
|
|
|
res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
if (!res0) {
|
|
|
|
dev_err(&pdev->dev, "no resource defined\n");
|
|
|
|
return -EBUSY;
|
|
|
|
}
|
|
|
|
if (!request_mem_region(res0->start, resource_size(res0),
|
|
|
|
pdev->name)) {
|
|
|
|
dev_err(&pdev->dev, "pcie gadget region already claimed\n");
|
|
|
|
return -EBUSY;
|
|
|
|
}
|
|
|
|
/* get resource for dbi registers*/
|
|
|
|
|
|
|
|
res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
|
|
if (!res1) {
|
|
|
|
dev_err(&pdev->dev, "no resource defined\n");
|
|
|
|
goto err_rel_res0;
|
|
|
|
}
|
|
|
|
if (!request_mem_region(res1->start, resource_size(res1),
|
|
|
|
pdev->name)) {
|
|
|
|
dev_err(&pdev->dev, "pcie gadget region already claimed\n");
|
|
|
|
goto err_rel_res0;
|
|
|
|
}
|
|
|
|
|
|
|
|
target = kzalloc(sizeof(*target), GFP_KERNEL);
|
|
|
|
if (!target) {
|
|
|
|
dev_err(&pdev->dev, "out of memory\n");
|
|
|
|
status = -ENOMEM;
|
|
|
|
goto err_rel_res;
|
|
|
|
}
|
|
|
|
|
|
|
|
cg_item = &target->subsys.su_group.cg_item;
|
|
|
|
sprintf(cg_item->ci_namebuf, "pcie_gadget.%d", pdev->id);
|
|
|
|
cg_item->ci_type = &pcie_gadget_target_type;
|
|
|
|
config = &target->config;
|
|
|
|
config->va_app_base = (void __iomem *)ioremap(res0->start,
|
|
|
|
resource_size(res0));
|
|
|
|
if (!config->va_app_base) {
|
|
|
|
dev_err(&pdev->dev, "ioremap fail\n");
|
|
|
|
status = -ENOMEM;
|
|
|
|
goto err_kzalloc;
|
|
|
|
}
|
|
|
|
|
|
|
|
config->base = (void __iomem *)res1->start;
|
|
|
|
|
|
|
|
config->va_dbi_base = (void __iomem *)ioremap(res1->start,
|
|
|
|
resource_size(res1));
|
|
|
|
if (!config->va_dbi_base) {
|
|
|
|
dev_err(&pdev->dev, "ioremap fail\n");
|
|
|
|
status = -ENOMEM;
|
|
|
|
goto err_iounmap_app;
|
|
|
|
}
|
|
|
|
|
|
|
|
dev_set_drvdata(&pdev->dev, target);
|
|
|
|
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
|
|
if (irq < 0) {
|
|
|
|
dev_err(&pdev->dev, "no update irq?\n");
|
|
|
|
status = irq;
|
|
|
|
goto err_iounmap;
|
|
|
|
}
|
|
|
|
|
|
|
|
status = request_irq(irq, spear_pcie_gadget_irq, 0, pdev->name, NULL);
|
|
|
|
if (status) {
|
2011-04-24 07:38:19 +04:00
|
|
|
dev_err(&pdev->dev,
|
|
|
|
"pcie gadget interrupt IRQ%d already claimed\n", irq);
|
2011-03-23 02:33:58 +03:00
|
|
|
goto err_iounmap;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Register configfs hooks */
|
|
|
|
subsys = &target->subsys;
|
|
|
|
config_group_init(&subsys->su_group);
|
|
|
|
mutex_init(&subsys->su_mutex);
|
|
|
|
status = configfs_register_subsystem(subsys);
|
|
|
|
if (status)
|
|
|
|
goto err_irq;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* init basic pcie application registers
|
|
|
|
* do not enable clock if it is PCIE0.Ideally , all controller should
|
|
|
|
* have been independent from others with respect to clock. But PCIE1
|
|
|
|
* and 2 depends on PCIE0.So PCIE0 clk is provided during board init.
|
|
|
|
*/
|
|
|
|
if (pdev->id == 1) {
|
|
|
|
/*
|
|
|
|
* Ideally CFG Clock should have been also enabled here. But
|
|
|
|
* it is done currently during board init routne
|
|
|
|
*/
|
|
|
|
clk = clk_get_sys("pcie1", NULL);
|
|
|
|
if (IS_ERR(clk)) {
|
|
|
|
pr_err("%s:couldn't get clk for pcie1\n", __func__);
|
|
|
|
goto err_irq;
|
|
|
|
}
|
|
|
|
if (clk_enable(clk)) {
|
|
|
|
pr_err("%s:couldn't enable clk for pcie1\n", __func__);
|
|
|
|
goto err_irq;
|
|
|
|
}
|
|
|
|
} else if (pdev->id == 2) {
|
|
|
|
/*
|
|
|
|
* Ideally CFG Clock should have been also enabled here. But
|
|
|
|
* it is done currently during board init routne
|
|
|
|
*/
|
|
|
|
clk = clk_get_sys("pcie2", NULL);
|
|
|
|
if (IS_ERR(clk)) {
|
|
|
|
pr_err("%s:couldn't get clk for pcie2\n", __func__);
|
|
|
|
goto err_irq;
|
|
|
|
}
|
|
|
|
if (clk_enable(clk)) {
|
|
|
|
pr_err("%s:couldn't enable clk for pcie2\n", __func__);
|
|
|
|
goto err_irq;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
spear13xx_pcie_device_init(config);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
err_irq:
|
|
|
|
free_irq(irq, NULL);
|
|
|
|
err_iounmap:
|
|
|
|
iounmap(config->va_dbi_base);
|
|
|
|
err_iounmap_app:
|
|
|
|
iounmap(config->va_app_base);
|
|
|
|
err_kzalloc:
|
2011-06-16 02:08:21 +04:00
|
|
|
kfree(target);
|
2011-03-23 02:33:58 +03:00
|
|
|
err_rel_res:
|
|
|
|
release_mem_region(res1->start, resource_size(res1));
|
|
|
|
err_rel_res0:
|
|
|
|
release_mem_region(res0->start, resource_size(res0));
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devexit spear_pcie_gadget_remove(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct resource *res0, *res1;
|
|
|
|
static struct pcie_gadget_target *target;
|
|
|
|
struct spear_pcie_gadget_config *config;
|
|
|
|
int irq;
|
|
|
|
|
|
|
|
res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
|
|
target = dev_get_drvdata(&pdev->dev);
|
|
|
|
config = &target->config;
|
|
|
|
|
|
|
|
free_irq(irq, NULL);
|
|
|
|
iounmap(config->va_dbi_base);
|
|
|
|
iounmap(config->va_app_base);
|
|
|
|
release_mem_region(res1->start, resource_size(res1));
|
|
|
|
release_mem_region(res0->start, resource_size(res0));
|
|
|
|
configfs_unregister_subsystem(&target->subsys);
|
|
|
|
kfree(target);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void spear_pcie_gadget_shutdown(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct platform_driver spear_pcie_gadget_driver = {
|
|
|
|
.probe = spear_pcie_gadget_probe,
|
|
|
|
.remove = spear_pcie_gadget_remove,
|
|
|
|
.shutdown = spear_pcie_gadget_shutdown,
|
|
|
|
.driver = {
|
|
|
|
.name = "pcie-gadget-spear",
|
|
|
|
.bus = &platform_bus_type
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init spear_pcie_gadget_init(void)
|
|
|
|
{
|
|
|
|
return platform_driver_register(&spear_pcie_gadget_driver);
|
|
|
|
}
|
|
|
|
module_init(spear_pcie_gadget_init);
|
|
|
|
|
|
|
|
static void __exit spear_pcie_gadget_exit(void)
|
|
|
|
{
|
|
|
|
platform_driver_unregister(&spear_pcie_gadget_driver);
|
|
|
|
}
|
|
|
|
module_exit(spear_pcie_gadget_exit);
|
|
|
|
|
|
|
|
MODULE_ALIAS("pcie-gadget-spear");
|
|
|
|
MODULE_AUTHOR("Pratyush Anand");
|
|
|
|
MODULE_LICENSE("GPL");
|