WSL2-Linux-Kernel/net/rxrpc/conn_object.c

488 строки
13 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0-or-later
rxrpc: Improve management and caching of client connection objects Improve the management and caching of client rxrpc connection objects. From this point, client connections will be managed separately from service connections because AF_RXRPC controls the creation and re-use of client connections but doesn't have that luxury with service connections. Further, there will be limits on the numbers of client connections that may be live on a machine. No direct restriction will be placed on the number of client calls, excepting that each client connection can support a maximum of four concurrent calls. Note that, for a number of reasons, we don't want to simply discard a client connection as soon as the last call is apparently finished: (1) Security is negotiated per-connection and the context is then shared between all calls on that connection. The context can be negotiated again if the connection lapses, but that involves holding up calls whilst at least two packets are exchanged and various crypto bits are performed - so we'd ideally like to cache it for a little while at least. (2) If a packet goes astray, we will need to retransmit a final ACK or ABORT packet. To make this work, we need to keep around the connection details for a little while. (3) The locally held structures represent some amount of setup time, to be weighed against their occupation of memory when idle. To this end, the client connection cache is managed by a state machine on each connection. There are five states: (1) INACTIVE - The connection is not held in any list and may not have been exposed to the world. If it has been previously exposed, it was discarded from the idle list after expiring. (2) WAITING - The connection is waiting for the number of client conns to drop below the maximum capacity. Calls may be in progress upon it from when it was active and got culled. The connection is on the rxrpc_waiting_client_conns list which is kept in to-be-granted order. Culled conns with waiters go to the back of the queue just like new conns. (3) ACTIVE - The connection has at least one call in progress upon it, it may freely grant available channels to new calls and calls may be waiting on it for channels to become available. The connection is on the rxrpc_active_client_conns list which is kept in activation order for culling purposes. (4) CULLED - The connection got summarily culled to try and free up capacity. Calls currently in progress on the connection are allowed to continue, but new calls will have to wait. There can be no waiters in this state - the conn would have to go to the WAITING state instead. (5) IDLE - The connection has no calls in progress upon it and must have been exposed to the world (ie. the EXPOSED flag must be set). When it expires, the EXPOSED flag is cleared and the connection transitions to the INACTIVE state. The connection is on the rxrpc_idle_client_conns list which is kept in order of how soon they'll expire. A connection in the ACTIVE or CULLED state must have at least one active call upon it; if in the WAITING state it may have active calls upon it; other states may not have active calls. As long as a connection remains active and doesn't get culled, it may continue to process calls - even if there are connections on the wait queue. This simplifies things a bit and reduces the amount of checking we need do. There are a couple flags of relevance to the cache: (1) EXPOSED - The connection ID got exposed to the world. If this flag is set, an extra ref is added to the connection preventing it from being reaped when it has no calls outstanding. This flag is cleared and the ref dropped when a conn is discarded from the idle list. (2) DONT_REUSE - The connection should be discarded as soon as possible and should not be reused. This commit also provides a number of new settings: (*) /proc/net/rxrpc/max_client_conns The maximum number of live client connections. Above this number, new connections get added to the wait list and must wait for an active conn to be culled. Culled connections can be reused, but they will go to the back of the wait list and have to wait. (*) /proc/net/rxrpc/reap_client_conns If the number of desired connections exceeds the maximum above, the active connection list will be culled until there are only this many left in it. (*) /proc/net/rxrpc/idle_conn_expiry The normal expiry time for a client connection, provided there are fewer than reap_client_conns of them around. (*) /proc/net/rxrpc/idle_conn_fast_expiry The expedited expiry time, used when there are more than reap_client_conns of them around. Note that I combined the Tx wait queue with the channel grant wait queue to save space as only one of these should be in use at once. Note also that, for the moment, the service connection cache still uses the old connection management code. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-24 09:30:52 +03:00
/* RxRPC virtual connection handler, common bits.
*
rxrpc: Improve management and caching of client connection objects Improve the management and caching of client rxrpc connection objects. From this point, client connections will be managed separately from service connections because AF_RXRPC controls the creation and re-use of client connections but doesn't have that luxury with service connections. Further, there will be limits on the numbers of client connections that may be live on a machine. No direct restriction will be placed on the number of client calls, excepting that each client connection can support a maximum of four concurrent calls. Note that, for a number of reasons, we don't want to simply discard a client connection as soon as the last call is apparently finished: (1) Security is negotiated per-connection and the context is then shared between all calls on that connection. The context can be negotiated again if the connection lapses, but that involves holding up calls whilst at least two packets are exchanged and various crypto bits are performed - so we'd ideally like to cache it for a little while at least. (2) If a packet goes astray, we will need to retransmit a final ACK or ABORT packet. To make this work, we need to keep around the connection details for a little while. (3) The locally held structures represent some amount of setup time, to be weighed against their occupation of memory when idle. To this end, the client connection cache is managed by a state machine on each connection. There are five states: (1) INACTIVE - The connection is not held in any list and may not have been exposed to the world. If it has been previously exposed, it was discarded from the idle list after expiring. (2) WAITING - The connection is waiting for the number of client conns to drop below the maximum capacity. Calls may be in progress upon it from when it was active and got culled. The connection is on the rxrpc_waiting_client_conns list which is kept in to-be-granted order. Culled conns with waiters go to the back of the queue just like new conns. (3) ACTIVE - The connection has at least one call in progress upon it, it may freely grant available channels to new calls and calls may be waiting on it for channels to become available. The connection is on the rxrpc_active_client_conns list which is kept in activation order for culling purposes. (4) CULLED - The connection got summarily culled to try and free up capacity. Calls currently in progress on the connection are allowed to continue, but new calls will have to wait. There can be no waiters in this state - the conn would have to go to the WAITING state instead. (5) IDLE - The connection has no calls in progress upon it and must have been exposed to the world (ie. the EXPOSED flag must be set). When it expires, the EXPOSED flag is cleared and the connection transitions to the INACTIVE state. The connection is on the rxrpc_idle_client_conns list which is kept in order of how soon they'll expire. A connection in the ACTIVE or CULLED state must have at least one active call upon it; if in the WAITING state it may have active calls upon it; other states may not have active calls. As long as a connection remains active and doesn't get culled, it may continue to process calls - even if there are connections on the wait queue. This simplifies things a bit and reduces the amount of checking we need do. There are a couple flags of relevance to the cache: (1) EXPOSED - The connection ID got exposed to the world. If this flag is set, an extra ref is added to the connection preventing it from being reaped when it has no calls outstanding. This flag is cleared and the ref dropped when a conn is discarded from the idle list. (2) DONT_REUSE - The connection should be discarded as soon as possible and should not be reused. This commit also provides a number of new settings: (*) /proc/net/rxrpc/max_client_conns The maximum number of live client connections. Above this number, new connections get added to the wait list and must wait for an active conn to be culled. Culled connections can be reused, but they will go to the back of the wait list and have to wait. (*) /proc/net/rxrpc/reap_client_conns If the number of desired connections exceeds the maximum above, the active connection list will be culled until there are only this many left in it. (*) /proc/net/rxrpc/idle_conn_expiry The normal expiry time for a client connection, provided there are fewer than reap_client_conns of them around. (*) /proc/net/rxrpc/idle_conn_fast_expiry The expedited expiry time, used when there are more than reap_client_conns of them around. Note that I combined the Tx wait queue with the channel grant wait queue to save space as only one of these should be in use at once. Note also that, for the moment, the service connection cache still uses the old connection management code. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-24 09:30:52 +03:00
* Copyright (C) 2007, 2016 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 11:04:11 +03:00
#include <linux/slab.h>
#include <linux/net.h>
#include <linux/skbuff.h>
#include "ar-internal.h"
/*
* Time till a connection expires after last use (in seconds).
*/
unsigned int __read_mostly rxrpc_connection_expiry = 10 * 60;
unsigned int __read_mostly rxrpc_closed_conn_expiry = 10;
rxrpc: Improve management and caching of client connection objects Improve the management and caching of client rxrpc connection objects. From this point, client connections will be managed separately from service connections because AF_RXRPC controls the creation and re-use of client connections but doesn't have that luxury with service connections. Further, there will be limits on the numbers of client connections that may be live on a machine. No direct restriction will be placed on the number of client calls, excepting that each client connection can support a maximum of four concurrent calls. Note that, for a number of reasons, we don't want to simply discard a client connection as soon as the last call is apparently finished: (1) Security is negotiated per-connection and the context is then shared between all calls on that connection. The context can be negotiated again if the connection lapses, but that involves holding up calls whilst at least two packets are exchanged and various crypto bits are performed - so we'd ideally like to cache it for a little while at least. (2) If a packet goes astray, we will need to retransmit a final ACK or ABORT packet. To make this work, we need to keep around the connection details for a little while. (3) The locally held structures represent some amount of setup time, to be weighed against their occupation of memory when idle. To this end, the client connection cache is managed by a state machine on each connection. There are five states: (1) INACTIVE - The connection is not held in any list and may not have been exposed to the world. If it has been previously exposed, it was discarded from the idle list after expiring. (2) WAITING - The connection is waiting for the number of client conns to drop below the maximum capacity. Calls may be in progress upon it from when it was active and got culled. The connection is on the rxrpc_waiting_client_conns list which is kept in to-be-granted order. Culled conns with waiters go to the back of the queue just like new conns. (3) ACTIVE - The connection has at least one call in progress upon it, it may freely grant available channels to new calls and calls may be waiting on it for channels to become available. The connection is on the rxrpc_active_client_conns list which is kept in activation order for culling purposes. (4) CULLED - The connection got summarily culled to try and free up capacity. Calls currently in progress on the connection are allowed to continue, but new calls will have to wait. There can be no waiters in this state - the conn would have to go to the WAITING state instead. (5) IDLE - The connection has no calls in progress upon it and must have been exposed to the world (ie. the EXPOSED flag must be set). When it expires, the EXPOSED flag is cleared and the connection transitions to the INACTIVE state. The connection is on the rxrpc_idle_client_conns list which is kept in order of how soon they'll expire. A connection in the ACTIVE or CULLED state must have at least one active call upon it; if in the WAITING state it may have active calls upon it; other states may not have active calls. As long as a connection remains active and doesn't get culled, it may continue to process calls - even if there are connections on the wait queue. This simplifies things a bit and reduces the amount of checking we need do. There are a couple flags of relevance to the cache: (1) EXPOSED - The connection ID got exposed to the world. If this flag is set, an extra ref is added to the connection preventing it from being reaped when it has no calls outstanding. This flag is cleared and the ref dropped when a conn is discarded from the idle list. (2) DONT_REUSE - The connection should be discarded as soon as possible and should not be reused. This commit also provides a number of new settings: (*) /proc/net/rxrpc/max_client_conns The maximum number of live client connections. Above this number, new connections get added to the wait list and must wait for an active conn to be culled. Culled connections can be reused, but they will go to the back of the wait list and have to wait. (*) /proc/net/rxrpc/reap_client_conns If the number of desired connections exceeds the maximum above, the active connection list will be culled until there are only this many left in it. (*) /proc/net/rxrpc/idle_conn_expiry The normal expiry time for a client connection, provided there are fewer than reap_client_conns of them around. (*) /proc/net/rxrpc/idle_conn_fast_expiry The expedited expiry time, used when there are more than reap_client_conns of them around. Note that I combined the Tx wait queue with the channel grant wait queue to save space as only one of these should be in use at once. Note also that, for the moment, the service connection cache still uses the old connection management code. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-24 09:30:52 +03:00
static void rxrpc_destroy_connection(struct rcu_head *);
static void rxrpc_connection_timer(struct timer_list *timer)
{
struct rxrpc_connection *conn =
container_of(timer, struct rxrpc_connection, timer);
rxrpc_queue_conn(conn);
}
/*
* allocate a new connection
*/
struct rxrpc_connection *rxrpc_alloc_connection(gfp_t gfp)
{
struct rxrpc_connection *conn;
_enter("");
conn = kzalloc(sizeof(struct rxrpc_connection), gfp);
if (conn) {
rxrpc: Improve management and caching of client connection objects Improve the management and caching of client rxrpc connection objects. From this point, client connections will be managed separately from service connections because AF_RXRPC controls the creation and re-use of client connections but doesn't have that luxury with service connections. Further, there will be limits on the numbers of client connections that may be live on a machine. No direct restriction will be placed on the number of client calls, excepting that each client connection can support a maximum of four concurrent calls. Note that, for a number of reasons, we don't want to simply discard a client connection as soon as the last call is apparently finished: (1) Security is negotiated per-connection and the context is then shared between all calls on that connection. The context can be negotiated again if the connection lapses, but that involves holding up calls whilst at least two packets are exchanged and various crypto bits are performed - so we'd ideally like to cache it for a little while at least. (2) If a packet goes astray, we will need to retransmit a final ACK or ABORT packet. To make this work, we need to keep around the connection details for a little while. (3) The locally held structures represent some amount of setup time, to be weighed against their occupation of memory when idle. To this end, the client connection cache is managed by a state machine on each connection. There are five states: (1) INACTIVE - The connection is not held in any list and may not have been exposed to the world. If it has been previously exposed, it was discarded from the idle list after expiring. (2) WAITING - The connection is waiting for the number of client conns to drop below the maximum capacity. Calls may be in progress upon it from when it was active and got culled. The connection is on the rxrpc_waiting_client_conns list which is kept in to-be-granted order. Culled conns with waiters go to the back of the queue just like new conns. (3) ACTIVE - The connection has at least one call in progress upon it, it may freely grant available channels to new calls and calls may be waiting on it for channels to become available. The connection is on the rxrpc_active_client_conns list which is kept in activation order for culling purposes. (4) CULLED - The connection got summarily culled to try and free up capacity. Calls currently in progress on the connection are allowed to continue, but new calls will have to wait. There can be no waiters in this state - the conn would have to go to the WAITING state instead. (5) IDLE - The connection has no calls in progress upon it and must have been exposed to the world (ie. the EXPOSED flag must be set). When it expires, the EXPOSED flag is cleared and the connection transitions to the INACTIVE state. The connection is on the rxrpc_idle_client_conns list which is kept in order of how soon they'll expire. A connection in the ACTIVE or CULLED state must have at least one active call upon it; if in the WAITING state it may have active calls upon it; other states may not have active calls. As long as a connection remains active and doesn't get culled, it may continue to process calls - even if there are connections on the wait queue. This simplifies things a bit and reduces the amount of checking we need do. There are a couple flags of relevance to the cache: (1) EXPOSED - The connection ID got exposed to the world. If this flag is set, an extra ref is added to the connection preventing it from being reaped when it has no calls outstanding. This flag is cleared and the ref dropped when a conn is discarded from the idle list. (2) DONT_REUSE - The connection should be discarded as soon as possible and should not be reused. This commit also provides a number of new settings: (*) /proc/net/rxrpc/max_client_conns The maximum number of live client connections. Above this number, new connections get added to the wait list and must wait for an active conn to be culled. Culled connections can be reused, but they will go to the back of the wait list and have to wait. (*) /proc/net/rxrpc/reap_client_conns If the number of desired connections exceeds the maximum above, the active connection list will be culled until there are only this many left in it. (*) /proc/net/rxrpc/idle_conn_expiry The normal expiry time for a client connection, provided there are fewer than reap_client_conns of them around. (*) /proc/net/rxrpc/idle_conn_fast_expiry The expedited expiry time, used when there are more than reap_client_conns of them around. Note that I combined the Tx wait queue with the channel grant wait queue to save space as only one of these should be in use at once. Note also that, for the moment, the service connection cache still uses the old connection management code. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-24 09:30:52 +03:00
INIT_LIST_HEAD(&conn->cache_link);
timer_setup(&conn->timer, &rxrpc_connection_timer, 0);
INIT_WORK(&conn->processor, &rxrpc_process_connection);
INIT_LIST_HEAD(&conn->proc_link);
INIT_LIST_HEAD(&conn->link);
skb_queue_head_init(&conn->rx_queue);
conn->security = &rxrpc_no_security;
spin_lock_init(&conn->state_lock);
conn->debug_id = atomic_inc_return(&rxrpc_debug_id);
conn->idle_timestamp = jiffies;
}
_leave(" = %p{%d}", conn, conn ? conn->debug_id : 0);
return conn;
}
/*
* Look up a connection in the cache by protocol parameters.
*
* If successful, a pointer to the connection is returned, but no ref is taken.
* NULL is returned if there is no match.
*
rxrpc: Make service call handling more robust Make the following changes to improve the robustness of the code that sets up a new service call: (1) Cache the rxrpc_sock struct obtained in rxrpc_data_ready() to do a service ID check and pass that along to rxrpc_new_incoming_call(). This means that I can remove the check from rxrpc_new_incoming_call() without the need to worry about the socket attached to the local endpoint getting replaced - which would invalidate the check. (2) Cache the rxrpc_peer struct, thereby allowing the peer search to be done once. The peer is passed to rxrpc_new_incoming_call(), thereby saving the need to repeat the search. This also reduces the possibility of rxrpc_publish_service_conn() BUG()'ing due to the detection of a duplicate connection, despite the initial search done by rxrpc_find_connection_rcu() having turned up nothing. This BUG() shouldn't ever get hit since rxrpc_data_ready() *should* be non-reentrant and the result of the initial search should still hold true, but it has proven possible to hit. I *think* this may be due to __rxrpc_lookup_peer_rcu() cutting short the iteration over the hash table if it finds a matching peer with a zero usage count, but I don't know for sure since it's only ever been hit once that I know of. Another possibility is that a bug in rxrpc_data_ready() that checked the wrong byte in the header for the RXRPC_CLIENT_INITIATED flag might've let through a packet that caused a spurious and invalid call to be set up. That is addressed in another patch. (3) Fix __rxrpc_lookup_peer_rcu() to skip peer records that have a zero usage count rather than stopping and returning not found, just in case there's another peer record behind it in the bucket. (4) Don't search the peer records in rxrpc_alloc_incoming_call(), but rather either use the peer cached in (2) or, if one wasn't found, preemptively install a new one. Fixes: 8496af50eb38 ("rxrpc: Use RCU to access a peer's service connection tree") Signed-off-by: David Howells <dhowells@redhat.com>
2018-09-27 17:13:09 +03:00
* When searching for a service call, if we find a peer but no connection, we
* return that through *_peer in case we need to create a new service call.
*
* The caller must be holding the RCU read lock.
*/
struct rxrpc_connection *rxrpc_find_connection_rcu(struct rxrpc_local *local,
rxrpc: Make service call handling more robust Make the following changes to improve the robustness of the code that sets up a new service call: (1) Cache the rxrpc_sock struct obtained in rxrpc_data_ready() to do a service ID check and pass that along to rxrpc_new_incoming_call(). This means that I can remove the check from rxrpc_new_incoming_call() without the need to worry about the socket attached to the local endpoint getting replaced - which would invalidate the check. (2) Cache the rxrpc_peer struct, thereby allowing the peer search to be done once. The peer is passed to rxrpc_new_incoming_call(), thereby saving the need to repeat the search. This also reduces the possibility of rxrpc_publish_service_conn() BUG()'ing due to the detection of a duplicate connection, despite the initial search done by rxrpc_find_connection_rcu() having turned up nothing. This BUG() shouldn't ever get hit since rxrpc_data_ready() *should* be non-reentrant and the result of the initial search should still hold true, but it has proven possible to hit. I *think* this may be due to __rxrpc_lookup_peer_rcu() cutting short the iteration over the hash table if it finds a matching peer with a zero usage count, but I don't know for sure since it's only ever been hit once that I know of. Another possibility is that a bug in rxrpc_data_ready() that checked the wrong byte in the header for the RXRPC_CLIENT_INITIATED flag might've let through a packet that caused a spurious and invalid call to be set up. That is addressed in another patch. (3) Fix __rxrpc_lookup_peer_rcu() to skip peer records that have a zero usage count rather than stopping and returning not found, just in case there's another peer record behind it in the bucket. (4) Don't search the peer records in rxrpc_alloc_incoming_call(), but rather either use the peer cached in (2) or, if one wasn't found, preemptively install a new one. Fixes: 8496af50eb38 ("rxrpc: Use RCU to access a peer's service connection tree") Signed-off-by: David Howells <dhowells@redhat.com>
2018-09-27 17:13:09 +03:00
struct sk_buff *skb,
struct rxrpc_peer **_peer)
{
struct rxrpc_connection *conn;
struct rxrpc_conn_proto k;
struct rxrpc_skb_priv *sp = rxrpc_skb(skb);
struct sockaddr_rxrpc srx;
struct rxrpc_peer *peer;
_enter(",%x", sp->hdr.cid & RXRPC_CIDMASK);
if (rxrpc_extract_addr_from_skb(&srx, skb) < 0)
goto not_found;
if (srx.transport.family != local->srx.transport.family &&
(srx.transport.family == AF_INET &&
local->srx.transport.family != AF_INET6)) {
pr_warn_ratelimited("AF_RXRPC: Protocol mismatch %u not %u\n",
srx.transport.family,
local->srx.transport.family);
goto not_found;
}
k.epoch = sp->hdr.epoch;
k.cid = sp->hdr.cid & RXRPC_CIDMASK;
if (rxrpc_to_server(sp)) {
/* We need to look up service connections by the full protocol
* parameter set. We look up the peer first as an intermediate
* step and then the connection from the peer's tree.
*/
peer = rxrpc_lookup_peer_rcu(local, &srx);
if (!peer)
goto not_found;
rxrpc: Make service call handling more robust Make the following changes to improve the robustness of the code that sets up a new service call: (1) Cache the rxrpc_sock struct obtained in rxrpc_data_ready() to do a service ID check and pass that along to rxrpc_new_incoming_call(). This means that I can remove the check from rxrpc_new_incoming_call() without the need to worry about the socket attached to the local endpoint getting replaced - which would invalidate the check. (2) Cache the rxrpc_peer struct, thereby allowing the peer search to be done once. The peer is passed to rxrpc_new_incoming_call(), thereby saving the need to repeat the search. This also reduces the possibility of rxrpc_publish_service_conn() BUG()'ing due to the detection of a duplicate connection, despite the initial search done by rxrpc_find_connection_rcu() having turned up nothing. This BUG() shouldn't ever get hit since rxrpc_data_ready() *should* be non-reentrant and the result of the initial search should still hold true, but it has proven possible to hit. I *think* this may be due to __rxrpc_lookup_peer_rcu() cutting short the iteration over the hash table if it finds a matching peer with a zero usage count, but I don't know for sure since it's only ever been hit once that I know of. Another possibility is that a bug in rxrpc_data_ready() that checked the wrong byte in the header for the RXRPC_CLIENT_INITIATED flag might've let through a packet that caused a spurious and invalid call to be set up. That is addressed in another patch. (3) Fix __rxrpc_lookup_peer_rcu() to skip peer records that have a zero usage count rather than stopping and returning not found, just in case there's another peer record behind it in the bucket. (4) Don't search the peer records in rxrpc_alloc_incoming_call(), but rather either use the peer cached in (2) or, if one wasn't found, preemptively install a new one. Fixes: 8496af50eb38 ("rxrpc: Use RCU to access a peer's service connection tree") Signed-off-by: David Howells <dhowells@redhat.com>
2018-09-27 17:13:09 +03:00
*_peer = peer;
conn = rxrpc_find_service_conn_rcu(peer, skb);
if (!conn || refcount_read(&conn->ref) == 0)
goto not_found;
_leave(" = %p", conn);
return conn;
2016-04-04 16:00:37 +03:00
} else {
/* Look up client connections by connection ID alone as their
* IDs are unique for this machine.
*/
conn = idr_find(&rxrpc_client_conn_ids,
sp->hdr.cid >> RXRPC_CIDSHIFT);
if (!conn || refcount_read(&conn->ref) == 0) {
_debug("no conn");
goto not_found;
}
if (conn->proto.epoch != k.epoch ||
conn->params.local != local)
goto not_found;
peer = conn->params.peer;
switch (srx.transport.family) {
case AF_INET:
if (peer->srx.transport.sin.sin_port !=
srx.transport.sin.sin_port ||
peer->srx.transport.sin.sin_addr.s_addr !=
srx.transport.sin.sin_addr.s_addr)
goto not_found;
break;
#ifdef CONFIG_AF_RXRPC_IPV6
case AF_INET6:
if (peer->srx.transport.sin6.sin6_port !=
srx.transport.sin6.sin6_port ||
memcmp(&peer->srx.transport.sin6.sin6_addr,
&srx.transport.sin6.sin6_addr,
sizeof(struct in6_addr)) != 0)
goto not_found;
break;
#endif
default:
BUG();
}
_leave(" = %p", conn);
return conn;
}
not_found:
_leave(" = NULL");
return NULL;
}
/*
* Disconnect a call and clear any channel it occupies when that call
rxrpc: Call channels should have separate call number spaces Each channel on a connection has a separate, independent number space from which to allocate callNumber values. It is entirely possible, for example, to have a connection with four active calls, each with call number 1. Note that the callNumber values for any particular channel don't have to start at 1, but they are supposed to increment monotonically for that channel from a client's perspective and may not be reused once the call number is transmitted (until the epoch cycles all the way back round). Currently, however, call numbers are allocated on a per-connection basis and, further, are held in an rb-tree. The rb-tree is redundant as the four channel pointers in the rxrpc_connection struct are entirely capable of pointing to all the calls currently in progress on a connection. To this end, make the following changes: (1) Handle call number allocation independently per channel. (2) Get rid of the conn->calls rb-tree. This is overkill as a connection may have a maximum of four calls in progress at any one time. Use the pointers in the channels[] array instead, indexed by the channel number from the packet. (3) For each channel, save the result of the last call that was in progress on that channel in conn->channels[] so that the final ACK or ABORT packet can be replayed if necessary. Any call earlier than that is just ignored. If we've seen the next call number in a packet, the last one is most definitely defunct. (4) When generating a RESPONSE packet for a connection, the call number counter for each channel must be included in it. (5) When parsing a RESPONSE packet for a connection, the call number counters contained therein should be used to set the minimum expected call numbers on each channel. To do in future commits: (1) Replay terminal packets based on the last call stored in conn->channels[]. (2) Connections should be retired before the callNumber space on any channel runs out. (3) A server is expected to disregard or reject any new incoming call that has a call number less than the current call number counter. The call number counter for that channel must be advanced to the new call number. Note that the server cannot just require that the next call that it sees on a channel be exactly the call number counter + 1 because then there's a scenario that could cause a problem: The client transmits a packet to initiate a connection, the network goes out, the server sends an ACK (which gets lost), the client sends an ABORT (which also gets lost); the network then reconnects, the client then reuses the call number for the next call (it doesn't know the server already saw the call number), but the server thinks it already has the first packet of this call (it doesn't know that the client doesn't know that it saw the call number the first time). Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-27 16:39:44 +03:00
* terminates. The caller must hold the channel_lock and must release the
* call's ref on the connection.
*/
rxrpc: Improve management and caching of client connection objects Improve the management and caching of client rxrpc connection objects. From this point, client connections will be managed separately from service connections because AF_RXRPC controls the creation and re-use of client connections but doesn't have that luxury with service connections. Further, there will be limits on the numbers of client connections that may be live on a machine. No direct restriction will be placed on the number of client calls, excepting that each client connection can support a maximum of four concurrent calls. Note that, for a number of reasons, we don't want to simply discard a client connection as soon as the last call is apparently finished: (1) Security is negotiated per-connection and the context is then shared between all calls on that connection. The context can be negotiated again if the connection lapses, but that involves holding up calls whilst at least two packets are exchanged and various crypto bits are performed - so we'd ideally like to cache it for a little while at least. (2) If a packet goes astray, we will need to retransmit a final ACK or ABORT packet. To make this work, we need to keep around the connection details for a little while. (3) The locally held structures represent some amount of setup time, to be weighed against their occupation of memory when idle. To this end, the client connection cache is managed by a state machine on each connection. There are five states: (1) INACTIVE - The connection is not held in any list and may not have been exposed to the world. If it has been previously exposed, it was discarded from the idle list after expiring. (2) WAITING - The connection is waiting for the number of client conns to drop below the maximum capacity. Calls may be in progress upon it from when it was active and got culled. The connection is on the rxrpc_waiting_client_conns list which is kept in to-be-granted order. Culled conns with waiters go to the back of the queue just like new conns. (3) ACTIVE - The connection has at least one call in progress upon it, it may freely grant available channels to new calls and calls may be waiting on it for channels to become available. The connection is on the rxrpc_active_client_conns list which is kept in activation order for culling purposes. (4) CULLED - The connection got summarily culled to try and free up capacity. Calls currently in progress on the connection are allowed to continue, but new calls will have to wait. There can be no waiters in this state - the conn would have to go to the WAITING state instead. (5) IDLE - The connection has no calls in progress upon it and must have been exposed to the world (ie. the EXPOSED flag must be set). When it expires, the EXPOSED flag is cleared and the connection transitions to the INACTIVE state. The connection is on the rxrpc_idle_client_conns list which is kept in order of how soon they'll expire. A connection in the ACTIVE or CULLED state must have at least one active call upon it; if in the WAITING state it may have active calls upon it; other states may not have active calls. As long as a connection remains active and doesn't get culled, it may continue to process calls - even if there are connections on the wait queue. This simplifies things a bit and reduces the amount of checking we need do. There are a couple flags of relevance to the cache: (1) EXPOSED - The connection ID got exposed to the world. If this flag is set, an extra ref is added to the connection preventing it from being reaped when it has no calls outstanding. This flag is cleared and the ref dropped when a conn is discarded from the idle list. (2) DONT_REUSE - The connection should be discarded as soon as possible and should not be reused. This commit also provides a number of new settings: (*) /proc/net/rxrpc/max_client_conns The maximum number of live client connections. Above this number, new connections get added to the wait list and must wait for an active conn to be culled. Culled connections can be reused, but they will go to the back of the wait list and have to wait. (*) /proc/net/rxrpc/reap_client_conns If the number of desired connections exceeds the maximum above, the active connection list will be culled until there are only this many left in it. (*) /proc/net/rxrpc/idle_conn_expiry The normal expiry time for a client connection, provided there are fewer than reap_client_conns of them around. (*) /proc/net/rxrpc/idle_conn_fast_expiry The expedited expiry time, used when there are more than reap_client_conns of them around. Note that I combined the Tx wait queue with the channel grant wait queue to save space as only one of these should be in use at once. Note also that, for the moment, the service connection cache still uses the old connection management code. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-24 09:30:52 +03:00
void __rxrpc_disconnect_call(struct rxrpc_connection *conn,
struct rxrpc_call *call)
{
struct rxrpc_channel *chan =
&conn->channels[call->cid & RXRPC_CHANNELMASK];
_enter("%d,%x", conn->debug_id, call->cid);
rxrpc: Call channels should have separate call number spaces Each channel on a connection has a separate, independent number space from which to allocate callNumber values. It is entirely possible, for example, to have a connection with four active calls, each with call number 1. Note that the callNumber values for any particular channel don't have to start at 1, but they are supposed to increment monotonically for that channel from a client's perspective and may not be reused once the call number is transmitted (until the epoch cycles all the way back round). Currently, however, call numbers are allocated on a per-connection basis and, further, are held in an rb-tree. The rb-tree is redundant as the four channel pointers in the rxrpc_connection struct are entirely capable of pointing to all the calls currently in progress on a connection. To this end, make the following changes: (1) Handle call number allocation independently per channel. (2) Get rid of the conn->calls rb-tree. This is overkill as a connection may have a maximum of four calls in progress at any one time. Use the pointers in the channels[] array instead, indexed by the channel number from the packet. (3) For each channel, save the result of the last call that was in progress on that channel in conn->channels[] so that the final ACK or ABORT packet can be replayed if necessary. Any call earlier than that is just ignored. If we've seen the next call number in a packet, the last one is most definitely defunct. (4) When generating a RESPONSE packet for a connection, the call number counter for each channel must be included in it. (5) When parsing a RESPONSE packet for a connection, the call number counters contained therein should be used to set the minimum expected call numbers on each channel. To do in future commits: (1) Replay terminal packets based on the last call stored in conn->channels[]. (2) Connections should be retired before the callNumber space on any channel runs out. (3) A server is expected to disregard or reject any new incoming call that has a call number less than the current call number counter. The call number counter for that channel must be advanced to the new call number. Note that the server cannot just require that the next call that it sees on a channel be exactly the call number counter + 1 because then there's a scenario that could cause a problem: The client transmits a packet to initiate a connection, the network goes out, the server sends an ACK (which gets lost), the client sends an ABORT (which also gets lost); the network then reconnects, the client then reuses the call number for the next call (it doesn't know the server already saw the call number), but the server thinks it already has the first packet of this call (it doesn't know that the client doesn't know that it saw the call number the first time). Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-27 16:39:44 +03:00
if (rcu_access_pointer(chan->call) == call) {
/* Save the result of the call so that we can repeat it if necessary
* through the channel, whilst disposing of the actual call record.
*/
trace_rxrpc_disconnect_call(call);
switch (call->completion) {
case RXRPC_CALL_SUCCEEDED:
rxrpc: Rewrite the data and ack handling code Rewrite the data and ack handling code such that: (1) Parsing of received ACK and ABORT packets and the distribution and the filing of DATA packets happens entirely within the data_ready context called from the UDP socket. This allows us to process and discard ACK and ABORT packets much more quickly (they're no longer stashed on a queue for a background thread to process). (2) We avoid calling skb_clone(), pskb_pull() and pskb_trim(). We instead keep track of the offset and length of the content of each packet in the sk_buff metadata. This means we don't do any allocation in the receive path. (3) Jumbo DATA packet parsing is now done in data_ready context. Rather than cloning the packet once for each subpacket and pulling/trimming it, we file the packet multiple times with an annotation for each indicating which subpacket is there. From that we can directly calculate the offset and length. (4) A call's receive queue can be accessed without taking locks (memory barriers do have to be used, though). (5) Incoming calls are set up from preallocated resources and immediately made live. They can than have packets queued upon them and ACKs generated. If insufficient resources exist, DATA packet #1 is given a BUSY reply and other DATA packets are discarded). (6) sk_buffs no longer take a ref on their parent call. To make this work, the following changes are made: (1) Each call's receive buffer is now a circular buffer of sk_buff pointers (rxtx_buffer) rather than a number of sk_buff_heads spread between the call and the socket. This permits each sk_buff to be in the buffer multiple times. The receive buffer is reused for the transmit buffer. (2) A circular buffer of annotations (rxtx_annotations) is kept parallel to the data buffer. Transmission phase annotations indicate whether a buffered packet has been ACK'd or not and whether it needs retransmission. Receive phase annotations indicate whether a slot holds a whole packet or a jumbo subpacket and, if the latter, which subpacket. They also note whether the packet has been decrypted in place. (3) DATA packet window tracking is much simplified. Each phase has just two numbers representing the window (rx_hard_ack/rx_top and tx_hard_ack/tx_top). The hard_ack number is the sequence number before base of the window, representing the last packet the other side says it has consumed. hard_ack starts from 0 and the first packet is sequence number 1. The top number is the sequence number of the highest-numbered packet residing in the buffer. Packets between hard_ack+1 and top are soft-ACK'd to indicate they've been received, but not yet consumed. Four macros, before(), before_eq(), after() and after_eq() are added to compare sequence numbers within the window. This allows for the top of the window to wrap when the hard-ack sequence number gets close to the limit. Two flags, RXRPC_CALL_RX_LAST and RXRPC_CALL_TX_LAST, are added also to indicate when rx_top and tx_top point at the packets with the LAST_PACKET bit set, indicating the end of the phase. (4) Calls are queued on the socket 'receive queue' rather than packets. This means that we don't need have to invent dummy packets to queue to indicate abnormal/terminal states and we don't have to keep metadata packets (such as ABORTs) around (5) The offset and length of a (sub)packet's content are now passed to the verify_packet security op. This is currently expected to decrypt the packet in place and validate it. However, there's now nowhere to store the revised offset and length of the actual data within the decrypted blob (there may be a header and padding to skip) because an sk_buff may represent multiple packets, so a locate_data security op is added to retrieve these details from the sk_buff content when needed. (6) recvmsg() now has to handle jumbo subpackets, where each subpacket is individually secured and needs to be individually decrypted. The code to do this is broken out into rxrpc_recvmsg_data() and shared with the kernel API. It now iterates over the call's receive buffer rather than walking the socket receive queue. Additional changes: (1) The timers are condensed to a single timer that is set for the soonest of three timeouts (delayed ACK generation, DATA retransmission and call lifespan). (2) Transmission of ACK and ABORT packets is effected immediately from process-context socket ops/kernel API calls that cause them instead of them being punted off to a background work item. The data_ready handler still has to defer to the background, though. (3) A shutdown op is added to the AF_RXRPC socket so that the AFS filesystem can shut down the socket and flush its own work items before closing the socket to deal with any in-progress service calls. Future additional changes that will need to be considered: (1) Make sure that a call doesn't hog the front of the queue by receiving data from the network as fast as userspace is consuming it to the exclusion of other calls. (2) Transmit delayed ACKs from within recvmsg() when we've consumed sufficiently more packets to avoid the background work item needing to run. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 13:10:12 +03:00
chan->last_seq = call->rx_hard_ack;
chan->last_type = RXRPC_PACKET_TYPE_ACK;
break;
case RXRPC_CALL_LOCALLY_ABORTED:
chan->last_abort = call->abort_code;
chan->last_type = RXRPC_PACKET_TYPE_ABORT;
break;
default:
chan->last_abort = RX_CALL_DEAD;
chan->last_type = RXRPC_PACKET_TYPE_ABORT;
break;
}
/* Sync with rxrpc_conn_retransmit(). */
rxrpc: Call channels should have separate call number spaces Each channel on a connection has a separate, independent number space from which to allocate callNumber values. It is entirely possible, for example, to have a connection with four active calls, each with call number 1. Note that the callNumber values for any particular channel don't have to start at 1, but they are supposed to increment monotonically for that channel from a client's perspective and may not be reused once the call number is transmitted (until the epoch cycles all the way back round). Currently, however, call numbers are allocated on a per-connection basis and, further, are held in an rb-tree. The rb-tree is redundant as the four channel pointers in the rxrpc_connection struct are entirely capable of pointing to all the calls currently in progress on a connection. To this end, make the following changes: (1) Handle call number allocation independently per channel. (2) Get rid of the conn->calls rb-tree. This is overkill as a connection may have a maximum of four calls in progress at any one time. Use the pointers in the channels[] array instead, indexed by the channel number from the packet. (3) For each channel, save the result of the last call that was in progress on that channel in conn->channels[] so that the final ACK or ABORT packet can be replayed if necessary. Any call earlier than that is just ignored. If we've seen the next call number in a packet, the last one is most definitely defunct. (4) When generating a RESPONSE packet for a connection, the call number counter for each channel must be included in it. (5) When parsing a RESPONSE packet for a connection, the call number counters contained therein should be used to set the minimum expected call numbers on each channel. To do in future commits: (1) Replay terminal packets based on the last call stored in conn->channels[]. (2) Connections should be retired before the callNumber space on any channel runs out. (3) A server is expected to disregard or reject any new incoming call that has a call number less than the current call number counter. The call number counter for that channel must be advanced to the new call number. Note that the server cannot just require that the next call that it sees on a channel be exactly the call number counter + 1 because then there's a scenario that could cause a problem: The client transmits a packet to initiate a connection, the network goes out, the server sends an ACK (which gets lost), the client sends an ABORT (which also gets lost); the network then reconnects, the client then reuses the call number for the next call (it doesn't know the server already saw the call number), but the server thinks it already has the first packet of this call (it doesn't know that the client doesn't know that it saw the call number the first time). Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-27 16:39:44 +03:00
smp_wmb();
chan->last_call = chan->call_id;
chan->call_id = chan->call_counter;
rxrpc: Release a call's connection ref on call disconnection When a call is disconnected, clear the call's pointer to the connection and release the associated ref on that connection. This means that the call no longer pins the connection and the connection can be discarded even before the call is. As the code currently stands, the call struct is effectively pinned by userspace until userspace has enacted a recvmsg() to retrieve the final call state as sk_buffs on the receive queue pin the call to which they're related because: (1) The rxrpc_call struct contains the userspace ID that recvmsg() has to include in the control message buffer to indicate which call is being referred to. This ID must remain valid until the terminal packet is completely read and must be invalidated immediately at that point as userspace is entitled to immediately reuse it. (2) The final ACK to the reply to a client call isn't sent until the last data packet is entirely read (it's probably worth altering this in future to be send the ACK as soon as all the data has been received). This change requires a bit of rearrangement to make sure that the call isn't going to try and access the connection again after protocol completion: (1) Delete the error link earlier when we're releasing the call. Possibly network errors should be distributed via connections at the cost of adding in an access to the rxrpc_connection struct. (2) Remove the call from the connection's call tree before disconnecting the call. The call tree needs to be removed anyway and incoming packets delivered by channel pointer instead. (3) The release call event should be considered last after all other events have been processed so that we don't need access to the connection again. (4) Move the channel_lock taking from rxrpc_release_call() to rxrpc_disconnect_call() where it will be required in future. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 16:00:38 +03:00
rxrpc: Call channels should have separate call number spaces Each channel on a connection has a separate, independent number space from which to allocate callNumber values. It is entirely possible, for example, to have a connection with four active calls, each with call number 1. Note that the callNumber values for any particular channel don't have to start at 1, but they are supposed to increment monotonically for that channel from a client's perspective and may not be reused once the call number is transmitted (until the epoch cycles all the way back round). Currently, however, call numbers are allocated on a per-connection basis and, further, are held in an rb-tree. The rb-tree is redundant as the four channel pointers in the rxrpc_connection struct are entirely capable of pointing to all the calls currently in progress on a connection. To this end, make the following changes: (1) Handle call number allocation independently per channel. (2) Get rid of the conn->calls rb-tree. This is overkill as a connection may have a maximum of four calls in progress at any one time. Use the pointers in the channels[] array instead, indexed by the channel number from the packet. (3) For each channel, save the result of the last call that was in progress on that channel in conn->channels[] so that the final ACK or ABORT packet can be replayed if necessary. Any call earlier than that is just ignored. If we've seen the next call number in a packet, the last one is most definitely defunct. (4) When generating a RESPONSE packet for a connection, the call number counter for each channel must be included in it. (5) When parsing a RESPONSE packet for a connection, the call number counters contained therein should be used to set the minimum expected call numbers on each channel. To do in future commits: (1) Replay terminal packets based on the last call stored in conn->channels[]. (2) Connections should be retired before the callNumber space on any channel runs out. (3) A server is expected to disregard or reject any new incoming call that has a call number less than the current call number counter. The call number counter for that channel must be advanced to the new call number. Note that the server cannot just require that the next call that it sees on a channel be exactly the call number counter + 1 because then there's a scenario that could cause a problem: The client transmits a packet to initiate a connection, the network goes out, the server sends an ACK (which gets lost), the client sends an ABORT (which also gets lost); the network then reconnects, the client then reuses the call number for the next call (it doesn't know the server already saw the call number), but the server thinks it already has the first packet of this call (it doesn't know that the client doesn't know that it saw the call number the first time). Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-27 16:39:44 +03:00
rcu_assign_pointer(chan->call, NULL);
}
rxrpc: Release a call's connection ref on call disconnection When a call is disconnected, clear the call's pointer to the connection and release the associated ref on that connection. This means that the call no longer pins the connection and the connection can be discarded even before the call is. As the code currently stands, the call struct is effectively pinned by userspace until userspace has enacted a recvmsg() to retrieve the final call state as sk_buffs on the receive queue pin the call to which they're related because: (1) The rxrpc_call struct contains the userspace ID that recvmsg() has to include in the control message buffer to indicate which call is being referred to. This ID must remain valid until the terminal packet is completely read and must be invalidated immediately at that point as userspace is entitled to immediately reuse it. (2) The final ACK to the reply to a client call isn't sent until the last data packet is entirely read (it's probably worth altering this in future to be send the ACK as soon as all the data has been received). This change requires a bit of rearrangement to make sure that the call isn't going to try and access the connection again after protocol completion: (1) Delete the error link earlier when we're releasing the call. Possibly network errors should be distributed via connections at the cost of adding in an access to the rxrpc_connection struct. (2) Remove the call from the connection's call tree before disconnecting the call. The call tree needs to be removed anyway and incoming packets delivered by channel pointer instead. (3) The release call event should be considered last after all other events have been processed so that we don't need access to the connection again. (4) Move the channel_lock taking from rxrpc_release_call() to rxrpc_disconnect_call() where it will be required in future. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 16:00:38 +03:00
rxrpc: Call channels should have separate call number spaces Each channel on a connection has a separate, independent number space from which to allocate callNumber values. It is entirely possible, for example, to have a connection with four active calls, each with call number 1. Note that the callNumber values for any particular channel don't have to start at 1, but they are supposed to increment monotonically for that channel from a client's perspective and may not be reused once the call number is transmitted (until the epoch cycles all the way back round). Currently, however, call numbers are allocated on a per-connection basis and, further, are held in an rb-tree. The rb-tree is redundant as the four channel pointers in the rxrpc_connection struct are entirely capable of pointing to all the calls currently in progress on a connection. To this end, make the following changes: (1) Handle call number allocation independently per channel. (2) Get rid of the conn->calls rb-tree. This is overkill as a connection may have a maximum of four calls in progress at any one time. Use the pointers in the channels[] array instead, indexed by the channel number from the packet. (3) For each channel, save the result of the last call that was in progress on that channel in conn->channels[] so that the final ACK or ABORT packet can be replayed if necessary. Any call earlier than that is just ignored. If we've seen the next call number in a packet, the last one is most definitely defunct. (4) When generating a RESPONSE packet for a connection, the call number counter for each channel must be included in it. (5) When parsing a RESPONSE packet for a connection, the call number counters contained therein should be used to set the minimum expected call numbers on each channel. To do in future commits: (1) Replay terminal packets based on the last call stored in conn->channels[]. (2) Connections should be retired before the callNumber space on any channel runs out. (3) A server is expected to disregard or reject any new incoming call that has a call number less than the current call number counter. The call number counter for that channel must be advanced to the new call number. Note that the server cannot just require that the next call that it sees on a channel be exactly the call number counter + 1 because then there's a scenario that could cause a problem: The client transmits a packet to initiate a connection, the network goes out, the server sends an ACK (which gets lost), the client sends an ABORT (which also gets lost); the network then reconnects, the client then reuses the call number for the next call (it doesn't know the server already saw the call number), but the server thinks it already has the first packet of this call (it doesn't know that the client doesn't know that it saw the call number the first time). Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-27 16:39:44 +03:00
_leave("");
}
/*
* Disconnect a call and clear any channel it occupies when that call
* terminates.
*/
void rxrpc_disconnect_call(struct rxrpc_call *call)
{
struct rxrpc_connection *conn = call->conn;
call->peer->cong_cwnd = call->cong_cwnd;
rxrpc: Fix race between recvmsg and sendmsg on immediate call failure There's a race between rxrpc_sendmsg setting up a call, but then failing to send anything on it due to an error, and recvmsg() seeing the call completion occur and trying to return the state to the user. An assertion fails in rxrpc_recvmsg() because the call has already been released from the socket and is about to be released again as recvmsg deals with it. (The recvmsg_q queue on the socket holds a ref, so there's no problem with use-after-free.) We also have to be careful not to end up reporting an error twice, in such a way that both returns indicate to userspace that the user ID supplied with the call is no longer in use - which could cause the client to malfunction if it recycles the user ID fast enough. Fix this by the following means: (1) When sendmsg() creates a call after the point that the call has been successfully added to the socket, don't return any errors through sendmsg(), but rather complete the call and let recvmsg() retrieve them. Make sendmsg() return 0 at this point. Further calls to sendmsg() for that call will fail with ESHUTDOWN. Note that at this point, we haven't send any packets yet, so the server doesn't yet know about the call. (2) If sendmsg() returns an error when it was expected to create a new call, it means that the user ID wasn't used. (3) Mark the call disconnected before marking it completed to prevent an oops in rxrpc_release_call(). (4) recvmsg() will then retrieve the error and set MSG_EOR to indicate that the user ID is no longer known by the kernel. An oops like the following is produced: kernel BUG at net/rxrpc/recvmsg.c:605! ... RIP: 0010:rxrpc_recvmsg+0x256/0x5ae ... Call Trace: ? __init_waitqueue_head+0x2f/0x2f ____sys_recvmsg+0x8a/0x148 ? import_iovec+0x69/0x9c ? copy_msghdr_from_user+0x5c/0x86 ___sys_recvmsg+0x72/0xaa ? __fget_files+0x22/0x57 ? __fget_light+0x46/0x51 ? fdget+0x9/0x1b do_recvmmsg+0x15e/0x232 ? _raw_spin_unlock+0xa/0xb ? vtime_delta+0xf/0x25 __x64_sys_recvmmsg+0x2c/0x2f do_syscall_64+0x4c/0x78 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 357f5ef64628 ("rxrpc: Call rxrpc_release_call() on error in rxrpc_new_client_call()") Reported-by: syzbot+b54969381df354936d96@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-29 02:03:56 +03:00
if (!hlist_unhashed(&call->error_link)) {
spin_lock_bh(&call->peer->lock);
hlist_del_rcu(&call->error_link);
spin_unlock_bh(&call->peer->lock);
}
rxrpc: Rewrite the data and ack handling code Rewrite the data and ack handling code such that: (1) Parsing of received ACK and ABORT packets and the distribution and the filing of DATA packets happens entirely within the data_ready context called from the UDP socket. This allows us to process and discard ACK and ABORT packets much more quickly (they're no longer stashed on a queue for a background thread to process). (2) We avoid calling skb_clone(), pskb_pull() and pskb_trim(). We instead keep track of the offset and length of the content of each packet in the sk_buff metadata. This means we don't do any allocation in the receive path. (3) Jumbo DATA packet parsing is now done in data_ready context. Rather than cloning the packet once for each subpacket and pulling/trimming it, we file the packet multiple times with an annotation for each indicating which subpacket is there. From that we can directly calculate the offset and length. (4) A call's receive queue can be accessed without taking locks (memory barriers do have to be used, though). (5) Incoming calls are set up from preallocated resources and immediately made live. They can than have packets queued upon them and ACKs generated. If insufficient resources exist, DATA packet #1 is given a BUSY reply and other DATA packets are discarded). (6) sk_buffs no longer take a ref on their parent call. To make this work, the following changes are made: (1) Each call's receive buffer is now a circular buffer of sk_buff pointers (rxtx_buffer) rather than a number of sk_buff_heads spread between the call and the socket. This permits each sk_buff to be in the buffer multiple times. The receive buffer is reused for the transmit buffer. (2) A circular buffer of annotations (rxtx_annotations) is kept parallel to the data buffer. Transmission phase annotations indicate whether a buffered packet has been ACK'd or not and whether it needs retransmission. Receive phase annotations indicate whether a slot holds a whole packet or a jumbo subpacket and, if the latter, which subpacket. They also note whether the packet has been decrypted in place. (3) DATA packet window tracking is much simplified. Each phase has just two numbers representing the window (rx_hard_ack/rx_top and tx_hard_ack/tx_top). The hard_ack number is the sequence number before base of the window, representing the last packet the other side says it has consumed. hard_ack starts from 0 and the first packet is sequence number 1. The top number is the sequence number of the highest-numbered packet residing in the buffer. Packets between hard_ack+1 and top are soft-ACK'd to indicate they've been received, but not yet consumed. Four macros, before(), before_eq(), after() and after_eq() are added to compare sequence numbers within the window. This allows for the top of the window to wrap when the hard-ack sequence number gets close to the limit. Two flags, RXRPC_CALL_RX_LAST and RXRPC_CALL_TX_LAST, are added also to indicate when rx_top and tx_top point at the packets with the LAST_PACKET bit set, indicating the end of the phase. (4) Calls are queued on the socket 'receive queue' rather than packets. This means that we don't need have to invent dummy packets to queue to indicate abnormal/terminal states and we don't have to keep metadata packets (such as ABORTs) around (5) The offset and length of a (sub)packet's content are now passed to the verify_packet security op. This is currently expected to decrypt the packet in place and validate it. However, there's now nowhere to store the revised offset and length of the actual data within the decrypted blob (there may be a header and padding to skip) because an sk_buff may represent multiple packets, so a locate_data security op is added to retrieve these details from the sk_buff content when needed. (6) recvmsg() now has to handle jumbo subpackets, where each subpacket is individually secured and needs to be individually decrypted. The code to do this is broken out into rxrpc_recvmsg_data() and shared with the kernel API. It now iterates over the call's receive buffer rather than walking the socket receive queue. Additional changes: (1) The timers are condensed to a single timer that is set for the soonest of three timeouts (delayed ACK generation, DATA retransmission and call lifespan). (2) Transmission of ACK and ABORT packets is effected immediately from process-context socket ops/kernel API calls that cause them instead of them being punted off to a background work item. The data_ready handler still has to defer to the background, though. (3) A shutdown op is added to the AF_RXRPC socket so that the AFS filesystem can shut down the socket and flush its own work items before closing the socket to deal with any in-progress service calls. Future additional changes that will need to be considered: (1) Make sure that a call doesn't hog the front of the queue by receiving data from the network as fast as userspace is consuming it to the exclusion of other calls. (2) Transmit delayed ACKs from within recvmsg() when we've consumed sufficiently more packets to avoid the background work item needing to run. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 13:10:12 +03:00
rxrpc: Improve management and caching of client connection objects Improve the management and caching of client rxrpc connection objects. From this point, client connections will be managed separately from service connections because AF_RXRPC controls the creation and re-use of client connections but doesn't have that luxury with service connections. Further, there will be limits on the numbers of client connections that may be live on a machine. No direct restriction will be placed on the number of client calls, excepting that each client connection can support a maximum of four concurrent calls. Note that, for a number of reasons, we don't want to simply discard a client connection as soon as the last call is apparently finished: (1) Security is negotiated per-connection and the context is then shared between all calls on that connection. The context can be negotiated again if the connection lapses, but that involves holding up calls whilst at least two packets are exchanged and various crypto bits are performed - so we'd ideally like to cache it for a little while at least. (2) If a packet goes astray, we will need to retransmit a final ACK or ABORT packet. To make this work, we need to keep around the connection details for a little while. (3) The locally held structures represent some amount of setup time, to be weighed against their occupation of memory when idle. To this end, the client connection cache is managed by a state machine on each connection. There are five states: (1) INACTIVE - The connection is not held in any list and may not have been exposed to the world. If it has been previously exposed, it was discarded from the idle list after expiring. (2) WAITING - The connection is waiting for the number of client conns to drop below the maximum capacity. Calls may be in progress upon it from when it was active and got culled. The connection is on the rxrpc_waiting_client_conns list which is kept in to-be-granted order. Culled conns with waiters go to the back of the queue just like new conns. (3) ACTIVE - The connection has at least one call in progress upon it, it may freely grant available channels to new calls and calls may be waiting on it for channels to become available. The connection is on the rxrpc_active_client_conns list which is kept in activation order for culling purposes. (4) CULLED - The connection got summarily culled to try and free up capacity. Calls currently in progress on the connection are allowed to continue, but new calls will have to wait. There can be no waiters in this state - the conn would have to go to the WAITING state instead. (5) IDLE - The connection has no calls in progress upon it and must have been exposed to the world (ie. the EXPOSED flag must be set). When it expires, the EXPOSED flag is cleared and the connection transitions to the INACTIVE state. The connection is on the rxrpc_idle_client_conns list which is kept in order of how soon they'll expire. A connection in the ACTIVE or CULLED state must have at least one active call upon it; if in the WAITING state it may have active calls upon it; other states may not have active calls. As long as a connection remains active and doesn't get culled, it may continue to process calls - even if there are connections on the wait queue. This simplifies things a bit and reduces the amount of checking we need do. There are a couple flags of relevance to the cache: (1) EXPOSED - The connection ID got exposed to the world. If this flag is set, an extra ref is added to the connection preventing it from being reaped when it has no calls outstanding. This flag is cleared and the ref dropped when a conn is discarded from the idle list. (2) DONT_REUSE - The connection should be discarded as soon as possible and should not be reused. This commit also provides a number of new settings: (*) /proc/net/rxrpc/max_client_conns The maximum number of live client connections. Above this number, new connections get added to the wait list and must wait for an active conn to be culled. Culled connections can be reused, but they will go to the back of the wait list and have to wait. (*) /proc/net/rxrpc/reap_client_conns If the number of desired connections exceeds the maximum above, the active connection list will be culled until there are only this many left in it. (*) /proc/net/rxrpc/idle_conn_expiry The normal expiry time for a client connection, provided there are fewer than reap_client_conns of them around. (*) /proc/net/rxrpc/idle_conn_fast_expiry The expedited expiry time, used when there are more than reap_client_conns of them around. Note that I combined the Tx wait queue with the channel grant wait queue to save space as only one of these should be in use at once. Note also that, for the moment, the service connection cache still uses the old connection management code. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-24 09:30:52 +03:00
if (rxrpc_is_client_call(call))
rxrpc: Rewrite the client connection manager Rewrite the rxrpc client connection manager so that it can support multiple connections for a given security key to a peer. The following changes are made: (1) For each open socket, the code currently maintains an rbtree with the connections placed into it, keyed by communications parameters. This is tricky to maintain as connections can be culled from the tree or replaced within it. Connections can require replacement for a number of reasons, e.g. their IDs span too great a range for the IDR data type to represent efficiently, the call ID numbers on that conn would overflow or the conn got aborted. This is changed so that there's now a connection bundle object placed in the tree, keyed on the same parameters. The bundle, however, does not need to be replaced. (2) An rxrpc_bundle object can now manage the available channels for a set of parallel connections. The lock that manages this is moved there from the rxrpc_connection struct (channel_lock). (3) There'a a dummy bundle for all incoming connections to share so that they have a channel_lock too. It might be better to give each incoming connection its own bundle. This bundle is not needed to manage which channels incoming calls are made on because that's the solely at whim of the client. (4) The restrictions on how many client connections are around are removed. Instead, a previous patch limits the number of client calls that can be allocated. Ordinarily, client connections are reaped after 2 minutes on the idle queue, but when more than a certain number of connections are in existence, the reaper starts reaping them after 2s of idleness instead to get the numbers back down. It could also be made such that new call allocations are forced to wait until the number of outstanding connections subsides. Signed-off-by: David Howells <dhowells@redhat.com>
2020-07-01 13:15:32 +03:00
return rxrpc_disconnect_client_call(conn->bundle, call);
rxrpc: Improve management and caching of client connection objects Improve the management and caching of client rxrpc connection objects. From this point, client connections will be managed separately from service connections because AF_RXRPC controls the creation and re-use of client connections but doesn't have that luxury with service connections. Further, there will be limits on the numbers of client connections that may be live on a machine. No direct restriction will be placed on the number of client calls, excepting that each client connection can support a maximum of four concurrent calls. Note that, for a number of reasons, we don't want to simply discard a client connection as soon as the last call is apparently finished: (1) Security is negotiated per-connection and the context is then shared between all calls on that connection. The context can be negotiated again if the connection lapses, but that involves holding up calls whilst at least two packets are exchanged and various crypto bits are performed - so we'd ideally like to cache it for a little while at least. (2) If a packet goes astray, we will need to retransmit a final ACK or ABORT packet. To make this work, we need to keep around the connection details for a little while. (3) The locally held structures represent some amount of setup time, to be weighed against their occupation of memory when idle. To this end, the client connection cache is managed by a state machine on each connection. There are five states: (1) INACTIVE - The connection is not held in any list and may not have been exposed to the world. If it has been previously exposed, it was discarded from the idle list after expiring. (2) WAITING - The connection is waiting for the number of client conns to drop below the maximum capacity. Calls may be in progress upon it from when it was active and got culled. The connection is on the rxrpc_waiting_client_conns list which is kept in to-be-granted order. Culled conns with waiters go to the back of the queue just like new conns. (3) ACTIVE - The connection has at least one call in progress upon it, it may freely grant available channels to new calls and calls may be waiting on it for channels to become available. The connection is on the rxrpc_active_client_conns list which is kept in activation order for culling purposes. (4) CULLED - The connection got summarily culled to try and free up capacity. Calls currently in progress on the connection are allowed to continue, but new calls will have to wait. There can be no waiters in this state - the conn would have to go to the WAITING state instead. (5) IDLE - The connection has no calls in progress upon it and must have been exposed to the world (ie. the EXPOSED flag must be set). When it expires, the EXPOSED flag is cleared and the connection transitions to the INACTIVE state. The connection is on the rxrpc_idle_client_conns list which is kept in order of how soon they'll expire. A connection in the ACTIVE or CULLED state must have at least one active call upon it; if in the WAITING state it may have active calls upon it; other states may not have active calls. As long as a connection remains active and doesn't get culled, it may continue to process calls - even if there are connections on the wait queue. This simplifies things a bit and reduces the amount of checking we need do. There are a couple flags of relevance to the cache: (1) EXPOSED - The connection ID got exposed to the world. If this flag is set, an extra ref is added to the connection preventing it from being reaped when it has no calls outstanding. This flag is cleared and the ref dropped when a conn is discarded from the idle list. (2) DONT_REUSE - The connection should be discarded as soon as possible and should not be reused. This commit also provides a number of new settings: (*) /proc/net/rxrpc/max_client_conns The maximum number of live client connections. Above this number, new connections get added to the wait list and must wait for an active conn to be culled. Culled connections can be reused, but they will go to the back of the wait list and have to wait. (*) /proc/net/rxrpc/reap_client_conns If the number of desired connections exceeds the maximum above, the active connection list will be culled until there are only this many left in it. (*) /proc/net/rxrpc/idle_conn_expiry The normal expiry time for a client connection, provided there are fewer than reap_client_conns of them around. (*) /proc/net/rxrpc/idle_conn_fast_expiry The expedited expiry time, used when there are more than reap_client_conns of them around. Note that I combined the Tx wait queue with the channel grant wait queue to save space as only one of these should be in use at once. Note also that, for the moment, the service connection cache still uses the old connection management code. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-24 09:30:52 +03:00
rxrpc: Rewrite the client connection manager Rewrite the rxrpc client connection manager so that it can support multiple connections for a given security key to a peer. The following changes are made: (1) For each open socket, the code currently maintains an rbtree with the connections placed into it, keyed by communications parameters. This is tricky to maintain as connections can be culled from the tree or replaced within it. Connections can require replacement for a number of reasons, e.g. their IDs span too great a range for the IDR data type to represent efficiently, the call ID numbers on that conn would overflow or the conn got aborted. This is changed so that there's now a connection bundle object placed in the tree, keyed on the same parameters. The bundle, however, does not need to be replaced. (2) An rxrpc_bundle object can now manage the available channels for a set of parallel connections. The lock that manages this is moved there from the rxrpc_connection struct (channel_lock). (3) There'a a dummy bundle for all incoming connections to share so that they have a channel_lock too. It might be better to give each incoming connection its own bundle. This bundle is not needed to manage which channels incoming calls are made on because that's the solely at whim of the client. (4) The restrictions on how many client connections are around are removed. Instead, a previous patch limits the number of client calls that can be allocated. Ordinarily, client connections are reaped after 2 minutes on the idle queue, but when more than a certain number of connections are in existence, the reaper starts reaping them after 2s of idleness instead to get the numbers back down. It could also be made such that new call allocations are forced to wait until the number of outstanding connections subsides. Signed-off-by: David Howells <dhowells@redhat.com>
2020-07-01 13:15:32 +03:00
spin_lock(&conn->bundle->channel_lock);
rxrpc: Improve management and caching of client connection objects Improve the management and caching of client rxrpc connection objects. From this point, client connections will be managed separately from service connections because AF_RXRPC controls the creation and re-use of client connections but doesn't have that luxury with service connections. Further, there will be limits on the numbers of client connections that may be live on a machine. No direct restriction will be placed on the number of client calls, excepting that each client connection can support a maximum of four concurrent calls. Note that, for a number of reasons, we don't want to simply discard a client connection as soon as the last call is apparently finished: (1) Security is negotiated per-connection and the context is then shared between all calls on that connection. The context can be negotiated again if the connection lapses, but that involves holding up calls whilst at least two packets are exchanged and various crypto bits are performed - so we'd ideally like to cache it for a little while at least. (2) If a packet goes astray, we will need to retransmit a final ACK or ABORT packet. To make this work, we need to keep around the connection details for a little while. (3) The locally held structures represent some amount of setup time, to be weighed against their occupation of memory when idle. To this end, the client connection cache is managed by a state machine on each connection. There are five states: (1) INACTIVE - The connection is not held in any list and may not have been exposed to the world. If it has been previously exposed, it was discarded from the idle list after expiring. (2) WAITING - The connection is waiting for the number of client conns to drop below the maximum capacity. Calls may be in progress upon it from when it was active and got culled. The connection is on the rxrpc_waiting_client_conns list which is kept in to-be-granted order. Culled conns with waiters go to the back of the queue just like new conns. (3) ACTIVE - The connection has at least one call in progress upon it, it may freely grant available channels to new calls and calls may be waiting on it for channels to become available. The connection is on the rxrpc_active_client_conns list which is kept in activation order for culling purposes. (4) CULLED - The connection got summarily culled to try and free up capacity. Calls currently in progress on the connection are allowed to continue, but new calls will have to wait. There can be no waiters in this state - the conn would have to go to the WAITING state instead. (5) IDLE - The connection has no calls in progress upon it and must have been exposed to the world (ie. the EXPOSED flag must be set). When it expires, the EXPOSED flag is cleared and the connection transitions to the INACTIVE state. The connection is on the rxrpc_idle_client_conns list which is kept in order of how soon they'll expire. A connection in the ACTIVE or CULLED state must have at least one active call upon it; if in the WAITING state it may have active calls upon it; other states may not have active calls. As long as a connection remains active and doesn't get culled, it may continue to process calls - even if there are connections on the wait queue. This simplifies things a bit and reduces the amount of checking we need do. There are a couple flags of relevance to the cache: (1) EXPOSED - The connection ID got exposed to the world. If this flag is set, an extra ref is added to the connection preventing it from being reaped when it has no calls outstanding. This flag is cleared and the ref dropped when a conn is discarded from the idle list. (2) DONT_REUSE - The connection should be discarded as soon as possible and should not be reused. This commit also provides a number of new settings: (*) /proc/net/rxrpc/max_client_conns The maximum number of live client connections. Above this number, new connections get added to the wait list and must wait for an active conn to be culled. Culled connections can be reused, but they will go to the back of the wait list and have to wait. (*) /proc/net/rxrpc/reap_client_conns If the number of desired connections exceeds the maximum above, the active connection list will be culled until there are only this many left in it. (*) /proc/net/rxrpc/idle_conn_expiry The normal expiry time for a client connection, provided there are fewer than reap_client_conns of them around. (*) /proc/net/rxrpc/idle_conn_fast_expiry The expedited expiry time, used when there are more than reap_client_conns of them around. Note that I combined the Tx wait queue with the channel grant wait queue to save space as only one of these should be in use at once. Note also that, for the moment, the service connection cache still uses the old connection management code. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-24 09:30:52 +03:00
__rxrpc_disconnect_call(conn, call);
rxrpc: Rewrite the client connection manager Rewrite the rxrpc client connection manager so that it can support multiple connections for a given security key to a peer. The following changes are made: (1) For each open socket, the code currently maintains an rbtree with the connections placed into it, keyed by communications parameters. This is tricky to maintain as connections can be culled from the tree or replaced within it. Connections can require replacement for a number of reasons, e.g. their IDs span too great a range for the IDR data type to represent efficiently, the call ID numbers on that conn would overflow or the conn got aborted. This is changed so that there's now a connection bundle object placed in the tree, keyed on the same parameters. The bundle, however, does not need to be replaced. (2) An rxrpc_bundle object can now manage the available channels for a set of parallel connections. The lock that manages this is moved there from the rxrpc_connection struct (channel_lock). (3) There'a a dummy bundle for all incoming connections to share so that they have a channel_lock too. It might be better to give each incoming connection its own bundle. This bundle is not needed to manage which channels incoming calls are made on because that's the solely at whim of the client. (4) The restrictions on how many client connections are around are removed. Instead, a previous patch limits the number of client calls that can be allocated. Ordinarily, client connections are reaped after 2 minutes on the idle queue, but when more than a certain number of connections are in existence, the reaper starts reaping them after 2s of idleness instead to get the numbers back down. It could also be made such that new call allocations are forced to wait until the number of outstanding connections subsides. Signed-off-by: David Howells <dhowells@redhat.com>
2020-07-01 13:15:32 +03:00
spin_unlock(&conn->bundle->channel_lock);
rxrpc: Release a call's connection ref on call disconnection When a call is disconnected, clear the call's pointer to the connection and release the associated ref on that connection. This means that the call no longer pins the connection and the connection can be discarded even before the call is. As the code currently stands, the call struct is effectively pinned by userspace until userspace has enacted a recvmsg() to retrieve the final call state as sk_buffs on the receive queue pin the call to which they're related because: (1) The rxrpc_call struct contains the userspace ID that recvmsg() has to include in the control message buffer to indicate which call is being referred to. This ID must remain valid until the terminal packet is completely read and must be invalidated immediately at that point as userspace is entitled to immediately reuse it. (2) The final ACK to the reply to a client call isn't sent until the last data packet is entirely read (it's probably worth altering this in future to be send the ACK as soon as all the data has been received). This change requires a bit of rearrangement to make sure that the call isn't going to try and access the connection again after protocol completion: (1) Delete the error link earlier when we're releasing the call. Possibly network errors should be distributed via connections at the cost of adding in an access to the rxrpc_connection struct. (2) Remove the call from the connection's call tree before disconnecting the call. The call tree needs to be removed anyway and incoming packets delivered by channel pointer instead. (3) The release call event should be considered last after all other events have been processed so that we don't need access to the connection again. (4) Move the channel_lock taking from rxrpc_release_call() to rxrpc_disconnect_call() where it will be required in future. Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-04 16:00:38 +03:00
set_bit(RXRPC_CALL_DISCONNECTED, &call->flags);
conn->idle_timestamp = jiffies;
}
rxrpc: Improve management and caching of client connection objects Improve the management and caching of client rxrpc connection objects. From this point, client connections will be managed separately from service connections because AF_RXRPC controls the creation and re-use of client connections but doesn't have that luxury with service connections. Further, there will be limits on the numbers of client connections that may be live on a machine. No direct restriction will be placed on the number of client calls, excepting that each client connection can support a maximum of four concurrent calls. Note that, for a number of reasons, we don't want to simply discard a client connection as soon as the last call is apparently finished: (1) Security is negotiated per-connection and the context is then shared between all calls on that connection. The context can be negotiated again if the connection lapses, but that involves holding up calls whilst at least two packets are exchanged and various crypto bits are performed - so we'd ideally like to cache it for a little while at least. (2) If a packet goes astray, we will need to retransmit a final ACK or ABORT packet. To make this work, we need to keep around the connection details for a little while. (3) The locally held structures represent some amount of setup time, to be weighed against their occupation of memory when idle. To this end, the client connection cache is managed by a state machine on each connection. There are five states: (1) INACTIVE - The connection is not held in any list and may not have been exposed to the world. If it has been previously exposed, it was discarded from the idle list after expiring. (2) WAITING - The connection is waiting for the number of client conns to drop below the maximum capacity. Calls may be in progress upon it from when it was active and got culled. The connection is on the rxrpc_waiting_client_conns list which is kept in to-be-granted order. Culled conns with waiters go to the back of the queue just like new conns. (3) ACTIVE - The connection has at least one call in progress upon it, it may freely grant available channels to new calls and calls may be waiting on it for channels to become available. The connection is on the rxrpc_active_client_conns list which is kept in activation order for culling purposes. (4) CULLED - The connection got summarily culled to try and free up capacity. Calls currently in progress on the connection are allowed to continue, but new calls will have to wait. There can be no waiters in this state - the conn would have to go to the WAITING state instead. (5) IDLE - The connection has no calls in progress upon it and must have been exposed to the world (ie. the EXPOSED flag must be set). When it expires, the EXPOSED flag is cleared and the connection transitions to the INACTIVE state. The connection is on the rxrpc_idle_client_conns list which is kept in order of how soon they'll expire. A connection in the ACTIVE or CULLED state must have at least one active call upon it; if in the WAITING state it may have active calls upon it; other states may not have active calls. As long as a connection remains active and doesn't get culled, it may continue to process calls - even if there are connections on the wait queue. This simplifies things a bit and reduces the amount of checking we need do. There are a couple flags of relevance to the cache: (1) EXPOSED - The connection ID got exposed to the world. If this flag is set, an extra ref is added to the connection preventing it from being reaped when it has no calls outstanding. This flag is cleared and the ref dropped when a conn is discarded from the idle list. (2) DONT_REUSE - The connection should be discarded as soon as possible and should not be reused. This commit also provides a number of new settings: (*) /proc/net/rxrpc/max_client_conns The maximum number of live client connections. Above this number, new connections get added to the wait list and must wait for an active conn to be culled. Culled connections can be reused, but they will go to the back of the wait list and have to wait. (*) /proc/net/rxrpc/reap_client_conns If the number of desired connections exceeds the maximum above, the active connection list will be culled until there are only this many left in it. (*) /proc/net/rxrpc/idle_conn_expiry The normal expiry time for a client connection, provided there are fewer than reap_client_conns of them around. (*) /proc/net/rxrpc/idle_conn_fast_expiry The expedited expiry time, used when there are more than reap_client_conns of them around. Note that I combined the Tx wait queue with the channel grant wait queue to save space as only one of these should be in use at once. Note also that, for the moment, the service connection cache still uses the old connection management code. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-24 09:30:52 +03:00
/*
* Kill off a connection.
*/
void rxrpc_kill_connection(struct rxrpc_connection *conn)
{
struct rxrpc_net *rxnet = conn->params.local->rxnet;
rxrpc: Improve management and caching of client connection objects Improve the management and caching of client rxrpc connection objects. From this point, client connections will be managed separately from service connections because AF_RXRPC controls the creation and re-use of client connections but doesn't have that luxury with service connections. Further, there will be limits on the numbers of client connections that may be live on a machine. No direct restriction will be placed on the number of client calls, excepting that each client connection can support a maximum of four concurrent calls. Note that, for a number of reasons, we don't want to simply discard a client connection as soon as the last call is apparently finished: (1) Security is negotiated per-connection and the context is then shared between all calls on that connection. The context can be negotiated again if the connection lapses, but that involves holding up calls whilst at least two packets are exchanged and various crypto bits are performed - so we'd ideally like to cache it for a little while at least. (2) If a packet goes astray, we will need to retransmit a final ACK or ABORT packet. To make this work, we need to keep around the connection details for a little while. (3) The locally held structures represent some amount of setup time, to be weighed against their occupation of memory when idle. To this end, the client connection cache is managed by a state machine on each connection. There are five states: (1) INACTIVE - The connection is not held in any list and may not have been exposed to the world. If it has been previously exposed, it was discarded from the idle list after expiring. (2) WAITING - The connection is waiting for the number of client conns to drop below the maximum capacity. Calls may be in progress upon it from when it was active and got culled. The connection is on the rxrpc_waiting_client_conns list which is kept in to-be-granted order. Culled conns with waiters go to the back of the queue just like new conns. (3) ACTIVE - The connection has at least one call in progress upon it, it may freely grant available channels to new calls and calls may be waiting on it for channels to become available. The connection is on the rxrpc_active_client_conns list which is kept in activation order for culling purposes. (4) CULLED - The connection got summarily culled to try and free up capacity. Calls currently in progress on the connection are allowed to continue, but new calls will have to wait. There can be no waiters in this state - the conn would have to go to the WAITING state instead. (5) IDLE - The connection has no calls in progress upon it and must have been exposed to the world (ie. the EXPOSED flag must be set). When it expires, the EXPOSED flag is cleared and the connection transitions to the INACTIVE state. The connection is on the rxrpc_idle_client_conns list which is kept in order of how soon they'll expire. A connection in the ACTIVE or CULLED state must have at least one active call upon it; if in the WAITING state it may have active calls upon it; other states may not have active calls. As long as a connection remains active and doesn't get culled, it may continue to process calls - even if there are connections on the wait queue. This simplifies things a bit and reduces the amount of checking we need do. There are a couple flags of relevance to the cache: (1) EXPOSED - The connection ID got exposed to the world. If this flag is set, an extra ref is added to the connection preventing it from being reaped when it has no calls outstanding. This flag is cleared and the ref dropped when a conn is discarded from the idle list. (2) DONT_REUSE - The connection should be discarded as soon as possible and should not be reused. This commit also provides a number of new settings: (*) /proc/net/rxrpc/max_client_conns The maximum number of live client connections. Above this number, new connections get added to the wait list and must wait for an active conn to be culled. Culled connections can be reused, but they will go to the back of the wait list and have to wait. (*) /proc/net/rxrpc/reap_client_conns If the number of desired connections exceeds the maximum above, the active connection list will be culled until there are only this many left in it. (*) /proc/net/rxrpc/idle_conn_expiry The normal expiry time for a client connection, provided there are fewer than reap_client_conns of them around. (*) /proc/net/rxrpc/idle_conn_fast_expiry The expedited expiry time, used when there are more than reap_client_conns of them around. Note that I combined the Tx wait queue with the channel grant wait queue to save space as only one of these should be in use at once. Note also that, for the moment, the service connection cache still uses the old connection management code. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-24 09:30:52 +03:00
ASSERT(!rcu_access_pointer(conn->channels[0].call) &&
!rcu_access_pointer(conn->channels[1].call) &&
!rcu_access_pointer(conn->channels[2].call) &&
!rcu_access_pointer(conn->channels[3].call));
ASSERT(list_empty(&conn->cache_link));
write_lock(&rxnet->conn_lock);
rxrpc: Improve management and caching of client connection objects Improve the management and caching of client rxrpc connection objects. From this point, client connections will be managed separately from service connections because AF_RXRPC controls the creation and re-use of client connections but doesn't have that luxury with service connections. Further, there will be limits on the numbers of client connections that may be live on a machine. No direct restriction will be placed on the number of client calls, excepting that each client connection can support a maximum of four concurrent calls. Note that, for a number of reasons, we don't want to simply discard a client connection as soon as the last call is apparently finished: (1) Security is negotiated per-connection and the context is then shared between all calls on that connection. The context can be negotiated again if the connection lapses, but that involves holding up calls whilst at least two packets are exchanged and various crypto bits are performed - so we'd ideally like to cache it for a little while at least. (2) If a packet goes astray, we will need to retransmit a final ACK or ABORT packet. To make this work, we need to keep around the connection details for a little while. (3) The locally held structures represent some amount of setup time, to be weighed against their occupation of memory when idle. To this end, the client connection cache is managed by a state machine on each connection. There are five states: (1) INACTIVE - The connection is not held in any list and may not have been exposed to the world. If it has been previously exposed, it was discarded from the idle list after expiring. (2) WAITING - The connection is waiting for the number of client conns to drop below the maximum capacity. Calls may be in progress upon it from when it was active and got culled. The connection is on the rxrpc_waiting_client_conns list which is kept in to-be-granted order. Culled conns with waiters go to the back of the queue just like new conns. (3) ACTIVE - The connection has at least one call in progress upon it, it may freely grant available channels to new calls and calls may be waiting on it for channels to become available. The connection is on the rxrpc_active_client_conns list which is kept in activation order for culling purposes. (4) CULLED - The connection got summarily culled to try and free up capacity. Calls currently in progress on the connection are allowed to continue, but new calls will have to wait. There can be no waiters in this state - the conn would have to go to the WAITING state instead. (5) IDLE - The connection has no calls in progress upon it and must have been exposed to the world (ie. the EXPOSED flag must be set). When it expires, the EXPOSED flag is cleared and the connection transitions to the INACTIVE state. The connection is on the rxrpc_idle_client_conns list which is kept in order of how soon they'll expire. A connection in the ACTIVE or CULLED state must have at least one active call upon it; if in the WAITING state it may have active calls upon it; other states may not have active calls. As long as a connection remains active and doesn't get culled, it may continue to process calls - even if there are connections on the wait queue. This simplifies things a bit and reduces the amount of checking we need do. There are a couple flags of relevance to the cache: (1) EXPOSED - The connection ID got exposed to the world. If this flag is set, an extra ref is added to the connection preventing it from being reaped when it has no calls outstanding. This flag is cleared and the ref dropped when a conn is discarded from the idle list. (2) DONT_REUSE - The connection should be discarded as soon as possible and should not be reused. This commit also provides a number of new settings: (*) /proc/net/rxrpc/max_client_conns The maximum number of live client connections. Above this number, new connections get added to the wait list and must wait for an active conn to be culled. Culled connections can be reused, but they will go to the back of the wait list and have to wait. (*) /proc/net/rxrpc/reap_client_conns If the number of desired connections exceeds the maximum above, the active connection list will be culled until there are only this many left in it. (*) /proc/net/rxrpc/idle_conn_expiry The normal expiry time for a client connection, provided there are fewer than reap_client_conns of them around. (*) /proc/net/rxrpc/idle_conn_fast_expiry The expedited expiry time, used when there are more than reap_client_conns of them around. Note that I combined the Tx wait queue with the channel grant wait queue to save space as only one of these should be in use at once. Note also that, for the moment, the service connection cache still uses the old connection management code. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-24 09:30:52 +03:00
list_del_init(&conn->proc_link);
write_unlock(&rxnet->conn_lock);
rxrpc: Improve management and caching of client connection objects Improve the management and caching of client rxrpc connection objects. From this point, client connections will be managed separately from service connections because AF_RXRPC controls the creation and re-use of client connections but doesn't have that luxury with service connections. Further, there will be limits on the numbers of client connections that may be live on a machine. No direct restriction will be placed on the number of client calls, excepting that each client connection can support a maximum of four concurrent calls. Note that, for a number of reasons, we don't want to simply discard a client connection as soon as the last call is apparently finished: (1) Security is negotiated per-connection and the context is then shared between all calls on that connection. The context can be negotiated again if the connection lapses, but that involves holding up calls whilst at least two packets are exchanged and various crypto bits are performed - so we'd ideally like to cache it for a little while at least. (2) If a packet goes astray, we will need to retransmit a final ACK or ABORT packet. To make this work, we need to keep around the connection details for a little while. (3) The locally held structures represent some amount of setup time, to be weighed against their occupation of memory when idle. To this end, the client connection cache is managed by a state machine on each connection. There are five states: (1) INACTIVE - The connection is not held in any list and may not have been exposed to the world. If it has been previously exposed, it was discarded from the idle list after expiring. (2) WAITING - The connection is waiting for the number of client conns to drop below the maximum capacity. Calls may be in progress upon it from when it was active and got culled. The connection is on the rxrpc_waiting_client_conns list which is kept in to-be-granted order. Culled conns with waiters go to the back of the queue just like new conns. (3) ACTIVE - The connection has at least one call in progress upon it, it may freely grant available channels to new calls and calls may be waiting on it for channels to become available. The connection is on the rxrpc_active_client_conns list which is kept in activation order for culling purposes. (4) CULLED - The connection got summarily culled to try and free up capacity. Calls currently in progress on the connection are allowed to continue, but new calls will have to wait. There can be no waiters in this state - the conn would have to go to the WAITING state instead. (5) IDLE - The connection has no calls in progress upon it and must have been exposed to the world (ie. the EXPOSED flag must be set). When it expires, the EXPOSED flag is cleared and the connection transitions to the INACTIVE state. The connection is on the rxrpc_idle_client_conns list which is kept in order of how soon they'll expire. A connection in the ACTIVE or CULLED state must have at least one active call upon it; if in the WAITING state it may have active calls upon it; other states may not have active calls. As long as a connection remains active and doesn't get culled, it may continue to process calls - even if there are connections on the wait queue. This simplifies things a bit and reduces the amount of checking we need do. There are a couple flags of relevance to the cache: (1) EXPOSED - The connection ID got exposed to the world. If this flag is set, an extra ref is added to the connection preventing it from being reaped when it has no calls outstanding. This flag is cleared and the ref dropped when a conn is discarded from the idle list. (2) DONT_REUSE - The connection should be discarded as soon as possible and should not be reused. This commit also provides a number of new settings: (*) /proc/net/rxrpc/max_client_conns The maximum number of live client connections. Above this number, new connections get added to the wait list and must wait for an active conn to be culled. Culled connections can be reused, but they will go to the back of the wait list and have to wait. (*) /proc/net/rxrpc/reap_client_conns If the number of desired connections exceeds the maximum above, the active connection list will be culled until there are only this many left in it. (*) /proc/net/rxrpc/idle_conn_expiry The normal expiry time for a client connection, provided there are fewer than reap_client_conns of them around. (*) /proc/net/rxrpc/idle_conn_fast_expiry The expedited expiry time, used when there are more than reap_client_conns of them around. Note that I combined the Tx wait queue with the channel grant wait queue to save space as only one of these should be in use at once. Note also that, for the moment, the service connection cache still uses the old connection management code. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-24 09:30:52 +03:00
/* Drain the Rx queue. Note that even though we've unpublished, an
* incoming packet could still be being added to our Rx queue, so we
* will need to drain it again in the RCU cleanup handler.
*/
rxrpc_purge_queue(&conn->rx_queue);
/* Leave final destruction to RCU. The connection processor work item
* must carry a ref on the connection to prevent us getting here whilst
* it is queued or running.
*/
call_rcu(&conn->rcu, rxrpc_destroy_connection);
}
/*
* Queue a connection's work processor, getting a ref to pass to the work
* queue.
*/
bool rxrpc_queue_conn(struct rxrpc_connection *conn)
{
const void *here = __builtin_return_address(0);
int r;
if (!__refcount_inc_not_zero(&conn->ref, &r))
return false;
if (rxrpc_queue_work(&conn->processor))
trace_rxrpc_conn(conn->debug_id, rxrpc_conn_queued, r + 1, here);
else
rxrpc_put_connection(conn);
return true;
}
/*
* Note the re-emergence of a connection.
*/
void rxrpc_see_connection(struct rxrpc_connection *conn)
{
const void *here = __builtin_return_address(0);
if (conn) {
int n = refcount_read(&conn->ref);
trace_rxrpc_conn(conn->debug_id, rxrpc_conn_seen, n, here);
}
}
/*
* Get a ref on a connection.
*/
rxrpc: Rewrite the client connection manager Rewrite the rxrpc client connection manager so that it can support multiple connections for a given security key to a peer. The following changes are made: (1) For each open socket, the code currently maintains an rbtree with the connections placed into it, keyed by communications parameters. This is tricky to maintain as connections can be culled from the tree or replaced within it. Connections can require replacement for a number of reasons, e.g. their IDs span too great a range for the IDR data type to represent efficiently, the call ID numbers on that conn would overflow or the conn got aborted. This is changed so that there's now a connection bundle object placed in the tree, keyed on the same parameters. The bundle, however, does not need to be replaced. (2) An rxrpc_bundle object can now manage the available channels for a set of parallel connections. The lock that manages this is moved there from the rxrpc_connection struct (channel_lock). (3) There'a a dummy bundle for all incoming connections to share so that they have a channel_lock too. It might be better to give each incoming connection its own bundle. This bundle is not needed to manage which channels incoming calls are made on because that's the solely at whim of the client. (4) The restrictions on how many client connections are around are removed. Instead, a previous patch limits the number of client calls that can be allocated. Ordinarily, client connections are reaped after 2 minutes on the idle queue, but when more than a certain number of connections are in existence, the reaper starts reaping them after 2s of idleness instead to get the numbers back down. It could also be made such that new call allocations are forced to wait until the number of outstanding connections subsides. Signed-off-by: David Howells <dhowells@redhat.com>
2020-07-01 13:15:32 +03:00
struct rxrpc_connection *rxrpc_get_connection(struct rxrpc_connection *conn)
{
const void *here = __builtin_return_address(0);
int r;
__refcount_inc(&conn->ref, &r);
trace_rxrpc_conn(conn->debug_id, rxrpc_conn_got, r, here);
rxrpc: Rewrite the client connection manager Rewrite the rxrpc client connection manager so that it can support multiple connections for a given security key to a peer. The following changes are made: (1) For each open socket, the code currently maintains an rbtree with the connections placed into it, keyed by communications parameters. This is tricky to maintain as connections can be culled from the tree or replaced within it. Connections can require replacement for a number of reasons, e.g. their IDs span too great a range for the IDR data type to represent efficiently, the call ID numbers on that conn would overflow or the conn got aborted. This is changed so that there's now a connection bundle object placed in the tree, keyed on the same parameters. The bundle, however, does not need to be replaced. (2) An rxrpc_bundle object can now manage the available channels for a set of parallel connections. The lock that manages this is moved there from the rxrpc_connection struct (channel_lock). (3) There'a a dummy bundle for all incoming connections to share so that they have a channel_lock too. It might be better to give each incoming connection its own bundle. This bundle is not needed to manage which channels incoming calls are made on because that's the solely at whim of the client. (4) The restrictions on how many client connections are around are removed. Instead, a previous patch limits the number of client calls that can be allocated. Ordinarily, client connections are reaped after 2 minutes on the idle queue, but when more than a certain number of connections are in existence, the reaper starts reaping them after 2s of idleness instead to get the numbers back down. It could also be made such that new call allocations are forced to wait until the number of outstanding connections subsides. Signed-off-by: David Howells <dhowells@redhat.com>
2020-07-01 13:15:32 +03:00
return conn;
}
/*
* Try to get a ref on a connection.
*/
struct rxrpc_connection *
rxrpc_get_connection_maybe(struct rxrpc_connection *conn)
{
const void *here = __builtin_return_address(0);
int r;
if (conn) {
if (__refcount_inc_not_zero(&conn->ref, &r))
trace_rxrpc_conn(conn->debug_id, rxrpc_conn_got, r + 1, here);
else
conn = NULL;
}
return conn;
}
/*
* Set the service connection reap timer.
*/
static void rxrpc_set_service_reap_timer(struct rxrpc_net *rxnet,
unsigned long reap_at)
{
if (rxnet->live)
timer_reduce(&rxnet->service_conn_reap_timer, reap_at);
}
/*
* Release a service connection
*/
void rxrpc_put_service_conn(struct rxrpc_connection *conn)
{
const void *here = __builtin_return_address(0);
unsigned int debug_id = conn->debug_id;
int r;
__refcount_dec(&conn->ref, &r);
trace_rxrpc_conn(debug_id, rxrpc_conn_put_service, r - 1, here);
if (r - 1 == 1)
rxrpc_set_service_reap_timer(conn->params.local->rxnet,
jiffies + rxrpc_connection_expiry);
}
/*
* destroy a virtual connection
*/
static void rxrpc_destroy_connection(struct rcu_head *rcu)
{
struct rxrpc_connection *conn =
container_of(rcu, struct rxrpc_connection, rcu);
_enter("{%d,u=%d}", conn->debug_id, refcount_read(&conn->ref));
ASSERTCMP(refcount_read(&conn->ref), ==, 0);
_net("DESTROY CONN %d", conn->debug_id);
del_timer_sync(&conn->timer);
rxrpc_purge_queue(&conn->rx_queue);
conn->security->clear(conn);
key_put(conn->params.key);
rxrpc: Rewrite the client connection manager Rewrite the rxrpc client connection manager so that it can support multiple connections for a given security key to a peer. The following changes are made: (1) For each open socket, the code currently maintains an rbtree with the connections placed into it, keyed by communications parameters. This is tricky to maintain as connections can be culled from the tree or replaced within it. Connections can require replacement for a number of reasons, e.g. their IDs span too great a range for the IDR data type to represent efficiently, the call ID numbers on that conn would overflow or the conn got aborted. This is changed so that there's now a connection bundle object placed in the tree, keyed on the same parameters. The bundle, however, does not need to be replaced. (2) An rxrpc_bundle object can now manage the available channels for a set of parallel connections. The lock that manages this is moved there from the rxrpc_connection struct (channel_lock). (3) There'a a dummy bundle for all incoming connections to share so that they have a channel_lock too. It might be better to give each incoming connection its own bundle. This bundle is not needed to manage which channels incoming calls are made on because that's the solely at whim of the client. (4) The restrictions on how many client connections are around are removed. Instead, a previous patch limits the number of client calls that can be allocated. Ordinarily, client connections are reaped after 2 minutes on the idle queue, but when more than a certain number of connections are in existence, the reaper starts reaping them after 2s of idleness instead to get the numbers back down. It could also be made such that new call allocations are forced to wait until the number of outstanding connections subsides. Signed-off-by: David Howells <dhowells@redhat.com>
2020-07-01 13:15:32 +03:00
rxrpc_put_bundle(conn->bundle);
rxrpc_put_peer(conn->params.peer);
if (atomic_dec_and_test(&conn->params.local->rxnet->nr_conns))
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next Pull networking updates from David Miller: 1) Support offloading wireless authentication to userspace via NL80211_CMD_EXTERNAL_AUTH, from Srinivas Dasari. 2) A lot of work on network namespace setup/teardown from Kirill Tkhai. Setup and cleanup of namespaces now all run asynchronously and thus performance is significantly increased. 3) Add rx/tx timestamping support to mv88e6xxx driver, from Brandon Streiff. 4) Support zerocopy on RDS sockets, from Sowmini Varadhan. 5) Use denser instruction encoding in x86 eBPF JIT, from Daniel Borkmann. 6) Support hw offload of vlan filtering in mvpp2 dreiver, from Maxime Chevallier. 7) Support grafting of child qdiscs in mlxsw driver, from Nogah Frankel. 8) Add packet forwarding tests to selftests, from Ido Schimmel. 9) Deal with sub-optimal GSO packets better in BBR congestion control, from Eric Dumazet. 10) Support 5-tuple hashing in ipv6 multipath routing, from David Ahern. 11) Add path MTU tests to selftests, from Stefano Brivio. 12) Various bits of IPSEC offloading support for mlx5, from Aviad Yehezkel, Yossi Kuperman, and Saeed Mahameed. 13) Support RSS spreading on ntuple filters in SFC driver, from Edward Cree. 14) Lots of sockmap work from John Fastabend. Applications can use eBPF to filter sendmsg and sendpage operations. 15) In-kernel receive TLS support, from Dave Watson. 16) Add XDP support to ixgbevf, this is significant because it should allow optimized XDP usage in various cloud environments. From Tony Nguyen. 17) Add new Intel E800 series "ice" ethernet driver, from Anirudh Venkataramanan et al. 18) IP fragmentation match offload support in nfp driver, from Pieter Jansen van Vuuren. 19) Support XDP redirect in i40e driver, from Björn Töpel. 20) Add BPF_RAW_TRACEPOINT program type for accessing the arguments of tracepoints in their raw form, from Alexei Starovoitov. 21) Lots of striding RQ improvements to mlx5 driver with many performance improvements, from Tariq Toukan. 22) Use rhashtable for inet frag reassembly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1678 commits) net: mvneta: improve suspend/resume net: mvneta: split rxq/txq init and txq deinit into SW and HW parts ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_thresh net: bgmac: Fix endian access in bgmac_dma_tx_ring_free() net: bgmac: Correctly annotate register space route: check sysctl_fib_multipath_use_neigh earlier than hash fix typo in command value in drivers/net/phy/mdio-bitbang. sky2: Increase D3 delay to sky2 stops working after suspend net/mlx5e: Set EQE based as default TX interrupt moderation mode ibmvnic: Disable irqs before exiting reset from closed state net: sched: do not emit messages while holding spinlock vlan: also check phy_driver ts_info for vlan's real device Bluetooth: Mark expected switch fall-throughs Bluetooth: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for BTUSB_QCA_ROME Bluetooth: btrsi: remove unused including <linux/version.h> Bluetooth: hci_bcm: Remove DMI quirk for the MINIX Z83-4 sh_eth: kill useless check in __sh_eth_get_regs() sh_eth: add sh_eth_cpu_data::no_xdfar flag ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data() ipv4: factorize sk_wmem_alloc updates done by __ip_append_data() ...
2018-04-04 00:04:18 +03:00
wake_up_var(&conn->params.local->rxnet->nr_conns);
rxrpc_put_local(conn->params.local);
kfree(conn);
_leave("");
}
/*
rxrpc: Improve management and caching of client connection objects Improve the management and caching of client rxrpc connection objects. From this point, client connections will be managed separately from service connections because AF_RXRPC controls the creation and re-use of client connections but doesn't have that luxury with service connections. Further, there will be limits on the numbers of client connections that may be live on a machine. No direct restriction will be placed on the number of client calls, excepting that each client connection can support a maximum of four concurrent calls. Note that, for a number of reasons, we don't want to simply discard a client connection as soon as the last call is apparently finished: (1) Security is negotiated per-connection and the context is then shared between all calls on that connection. The context can be negotiated again if the connection lapses, but that involves holding up calls whilst at least two packets are exchanged and various crypto bits are performed - so we'd ideally like to cache it for a little while at least. (2) If a packet goes astray, we will need to retransmit a final ACK or ABORT packet. To make this work, we need to keep around the connection details for a little while. (3) The locally held structures represent some amount of setup time, to be weighed against their occupation of memory when idle. To this end, the client connection cache is managed by a state machine on each connection. There are five states: (1) INACTIVE - The connection is not held in any list and may not have been exposed to the world. If it has been previously exposed, it was discarded from the idle list after expiring. (2) WAITING - The connection is waiting for the number of client conns to drop below the maximum capacity. Calls may be in progress upon it from when it was active and got culled. The connection is on the rxrpc_waiting_client_conns list which is kept in to-be-granted order. Culled conns with waiters go to the back of the queue just like new conns. (3) ACTIVE - The connection has at least one call in progress upon it, it may freely grant available channels to new calls and calls may be waiting on it for channels to become available. The connection is on the rxrpc_active_client_conns list which is kept in activation order for culling purposes. (4) CULLED - The connection got summarily culled to try and free up capacity. Calls currently in progress on the connection are allowed to continue, but new calls will have to wait. There can be no waiters in this state - the conn would have to go to the WAITING state instead. (5) IDLE - The connection has no calls in progress upon it and must have been exposed to the world (ie. the EXPOSED flag must be set). When it expires, the EXPOSED flag is cleared and the connection transitions to the INACTIVE state. The connection is on the rxrpc_idle_client_conns list which is kept in order of how soon they'll expire. A connection in the ACTIVE or CULLED state must have at least one active call upon it; if in the WAITING state it may have active calls upon it; other states may not have active calls. As long as a connection remains active and doesn't get culled, it may continue to process calls - even if there are connections on the wait queue. This simplifies things a bit and reduces the amount of checking we need do. There are a couple flags of relevance to the cache: (1) EXPOSED - The connection ID got exposed to the world. If this flag is set, an extra ref is added to the connection preventing it from being reaped when it has no calls outstanding. This flag is cleared and the ref dropped when a conn is discarded from the idle list. (2) DONT_REUSE - The connection should be discarded as soon as possible and should not be reused. This commit also provides a number of new settings: (*) /proc/net/rxrpc/max_client_conns The maximum number of live client connections. Above this number, new connections get added to the wait list and must wait for an active conn to be culled. Culled connections can be reused, but they will go to the back of the wait list and have to wait. (*) /proc/net/rxrpc/reap_client_conns If the number of desired connections exceeds the maximum above, the active connection list will be culled until there are only this many left in it. (*) /proc/net/rxrpc/idle_conn_expiry The normal expiry time for a client connection, provided there are fewer than reap_client_conns of them around. (*) /proc/net/rxrpc/idle_conn_fast_expiry The expedited expiry time, used when there are more than reap_client_conns of them around. Note that I combined the Tx wait queue with the channel grant wait queue to save space as only one of these should be in use at once. Note also that, for the moment, the service connection cache still uses the old connection management code. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-24 09:30:52 +03:00
* reap dead service connections
*/
void rxrpc_service_connection_reaper(struct work_struct *work)
{
struct rxrpc_connection *conn, *_p;
struct rxrpc_net *rxnet =
container_of(work, struct rxrpc_net, service_conn_reaper);
unsigned long expire_at, earliest, idle_timestamp, now;
LIST_HEAD(graveyard);
_enter("");
now = jiffies;
earliest = now + MAX_JIFFY_OFFSET;
write_lock(&rxnet->conn_lock);
list_for_each_entry_safe(conn, _p, &rxnet->service_conns, link) {
ASSERTCMP(refcount_read(&conn->ref), >, 0);
if (likely(refcount_read(&conn->ref) > 1))
continue;
rxrpc: Preallocate peers, conns and calls for incoming service requests Make it possible for the data_ready handler called from the UDP transport socket to completely instantiate an rxrpc_call structure and make it immediately live by preallocating all the memory it might need. The idea is to cut out the background thread usage as much as possible. [Note that the preallocated structs are not actually used in this patch - that will be done in a future patch.] If insufficient resources are available in the preallocation buffers, it will be possible to discard the DATA packet in the data_ready handler or schedule a BUSY packet without the need to schedule an attempt at allocation in a background thread. To this end: (1) Preallocate rxrpc_peer, rxrpc_connection and rxrpc_call structs to a maximum number each of the listen backlog size. The backlog size is limited to a maxmimum of 32. Only this many of each can be in the preallocation buffer. (2) For userspace sockets, the preallocation is charged initially by listen() and will be recharged by accepting or rejecting pending new incoming calls. (3) For kernel services {,re,dis}charging of the preallocation buffers is handled manually. Two notifier callbacks have to be provided before kernel_listen() is invoked: (a) An indication that a new call has been instantiated. This can be used to trigger background recharging. (b) An indication that a call is being discarded. This is used when the socket is being released. A function, rxrpc_kernel_charge_accept() is called by the kernel service to preallocate a single call. It should be passed the user ID to be used for that call and a callback to associate the rxrpc call with the kernel service's side of the ID. (4) Discard the preallocation when the socket is closed. (5) Temporarily bump the refcount on the call allocated in rxrpc_incoming_call() so that rxrpc_release_call() can ditch the preallocation ref on service calls unconditionally. This will no longer be necessary once the preallocation is used. Note that this does not yet control the number of active service calls on a client - that will come in a later patch. A future development would be to provide a setsockopt() call that allows a userspace server to manually charge the preallocation buffer. This would allow user call IDs to be provided in advance and the awkward manual accept stage to be bypassed. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 13:10:12 +03:00
if (conn->state == RXRPC_CONN_SERVICE_PREALLOC)
continue;
rxrpc: Fix lack of conn cleanup when local endpoint is cleaned up [ver #2] When a local endpoint is ceases to be in use, such as when the kafs module is unloaded, the kernel will emit an assertion failure if there are any outstanding client connections: rxrpc: Assertion failed ------------[ cut here ]------------ kernel BUG at net/rxrpc/local_object.c:433! and even beyond that, will evince other oopses if there are service connections still present. Fix this by: (1) Removing the triggering of connection reaping when an rxrpc socket is released. These don't actually clean up the connections anyway - and further, the local endpoint may still be in use through another socket. (2) Mark the local endpoint as dead when we start the process of tearing it down. (3) When destroying a local endpoint, strip all of its client connections from the idle list and discard the ref on each that the list was holding. (4) When destroying a local endpoint, call the service connection reaper directly (rather than through a workqueue) to immediately kill off all outstanding service connections. (5) Make the service connection reaper reap connections for which the local endpoint is marked dead. Only after destroying the connections can we close the socket lest we get an oops in a workqueue that's looking at a connection or a peer. Fixes: 3d18cbb7fd0c ("rxrpc: Fix conn expiry timers") Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-29 16:12:11 +03:00
if (rxnet->live && !conn->params.local->dead) {
idle_timestamp = READ_ONCE(conn->idle_timestamp);
expire_at = idle_timestamp + rxrpc_connection_expiry * HZ;
if (conn->params.local->service_closed)
expire_at = idle_timestamp + rxrpc_closed_conn_expiry * HZ;
_debug("reap CONN %d { u=%d,t=%ld }",
conn->debug_id, refcount_read(&conn->ref),
(long)expire_at - (long)now);
if (time_before(now, expire_at)) {
if (time_before(expire_at, earliest))
earliest = expire_at;
continue;
}
}
rxrpc: Maintain an extra ref on a conn for the cache list Overhaul the usage count accounting for the rxrpc_connection struct to make it easier to implement RCU access from the data_ready handler. The problem is that currently we're using a lock to prevent the garbage collector from trying to clean up a connection that we're contemplating unidling. We could just stick incoming packets on the connection we find, but we've then got a problem that we may race when dispatching a work item to process it as we need to give that a ref to prevent the rxrpc_connection struct from disappearing in the meantime. Further, incoming packets may get discarded if attached to an rxrpc_connection struct that is going away. Whilst this is not a total disaster - the client will presumably resend - it would delay processing of the call. This would affect the AFS client filesystem's service manager operation. To this end: (1) We now maintain an extra count on the connection usage count whilst it is on the connection list. This mean it is not in use when its refcount is 1. (2) When trying to reuse an old connection, we only increment the refcount if it is greater than 0. If it is 0, we replace it in the tree with a new candidate connection. (3) Two connection flags are added to indicate whether or not a connection is in the local's client connection tree (used by sendmsg) or the peer's service connection tree (used by data_ready). This makes sure that we don't try and remove a connection if it got replaced. The flags are tested under lock with the removal operation to prevent the reaper from killing the rxrpc_connection struct whilst someone else is trying to effect a replacement. This could probably be alleviated by using memory barriers between the flag set/test and the rb_tree ops. The rb_tree op would still need to be under the lock, however. (4) When trying to reap an old connection, we try to flip the usage count from 1 to 0. If it's not 1 at that point, then it must've come back to life temporarily and we ignore it. Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-30 12:45:22 +03:00
/* The usage count sits at 1 whilst the object is unused on the
* list; we reduce that to 0 to make the object unavailable.
*/
if (!refcount_dec_if_one(&conn->ref))
rxrpc: Maintain an extra ref on a conn for the cache list Overhaul the usage count accounting for the rxrpc_connection struct to make it easier to implement RCU access from the data_ready handler. The problem is that currently we're using a lock to prevent the garbage collector from trying to clean up a connection that we're contemplating unidling. We could just stick incoming packets on the connection we find, but we've then got a problem that we may race when dispatching a work item to process it as we need to give that a ref to prevent the rxrpc_connection struct from disappearing in the meantime. Further, incoming packets may get discarded if attached to an rxrpc_connection struct that is going away. Whilst this is not a total disaster - the client will presumably resend - it would delay processing of the call. This would affect the AFS client filesystem's service manager operation. To this end: (1) We now maintain an extra count on the connection usage count whilst it is on the connection list. This mean it is not in use when its refcount is 1. (2) When trying to reuse an old connection, we only increment the refcount if it is greater than 0. If it is 0, we replace it in the tree with a new candidate connection. (3) Two connection flags are added to indicate whether or not a connection is in the local's client connection tree (used by sendmsg) or the peer's service connection tree (used by data_ready). This makes sure that we don't try and remove a connection if it got replaced. The flags are tested under lock with the removal operation to prevent the reaper from killing the rxrpc_connection struct whilst someone else is trying to effect a replacement. This could probably be alleviated by using memory barriers between the flag set/test and the rb_tree ops. The rb_tree op would still need to be under the lock, however. (4) When trying to reap an old connection, we try to flip the usage count from 1 to 0. If it's not 1 at that point, then it must've come back to life temporarily and we ignore it. Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-30 12:45:22 +03:00
continue;
trace_rxrpc_conn(conn->debug_id, rxrpc_conn_reap_service, 0, NULL);
rxrpc: Maintain an extra ref on a conn for the cache list Overhaul the usage count accounting for the rxrpc_connection struct to make it easier to implement RCU access from the data_ready handler. The problem is that currently we're using a lock to prevent the garbage collector from trying to clean up a connection that we're contemplating unidling. We could just stick incoming packets on the connection we find, but we've then got a problem that we may race when dispatching a work item to process it as we need to give that a ref to prevent the rxrpc_connection struct from disappearing in the meantime. Further, incoming packets may get discarded if attached to an rxrpc_connection struct that is going away. Whilst this is not a total disaster - the client will presumably resend - it would delay processing of the call. This would affect the AFS client filesystem's service manager operation. To this end: (1) We now maintain an extra count on the connection usage count whilst it is on the connection list. This mean it is not in use when its refcount is 1. (2) When trying to reuse an old connection, we only increment the refcount if it is greater than 0. If it is 0, we replace it in the tree with a new candidate connection. (3) Two connection flags are added to indicate whether or not a connection is in the local's client connection tree (used by sendmsg) or the peer's service connection tree (used by data_ready). This makes sure that we don't try and remove a connection if it got replaced. The flags are tested under lock with the removal operation to prevent the reaper from killing the rxrpc_connection struct whilst someone else is trying to effect a replacement. This could probably be alleviated by using memory barriers between the flag set/test and the rb_tree ops. The rb_tree op would still need to be under the lock, however. (4) When trying to reap an old connection, we try to flip the usage count from 1 to 0. If it's not 1 at that point, then it must've come back to life temporarily and we ignore it. Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-30 12:45:22 +03:00
if (rxrpc_conn_is_client(conn))
rxrpc: Improve management and caching of client connection objects Improve the management and caching of client rxrpc connection objects. From this point, client connections will be managed separately from service connections because AF_RXRPC controls the creation and re-use of client connections but doesn't have that luxury with service connections. Further, there will be limits on the numbers of client connections that may be live on a machine. No direct restriction will be placed on the number of client calls, excepting that each client connection can support a maximum of four concurrent calls. Note that, for a number of reasons, we don't want to simply discard a client connection as soon as the last call is apparently finished: (1) Security is negotiated per-connection and the context is then shared between all calls on that connection. The context can be negotiated again if the connection lapses, but that involves holding up calls whilst at least two packets are exchanged and various crypto bits are performed - so we'd ideally like to cache it for a little while at least. (2) If a packet goes astray, we will need to retransmit a final ACK or ABORT packet. To make this work, we need to keep around the connection details for a little while. (3) The locally held structures represent some amount of setup time, to be weighed against their occupation of memory when idle. To this end, the client connection cache is managed by a state machine on each connection. There are five states: (1) INACTIVE - The connection is not held in any list and may not have been exposed to the world. If it has been previously exposed, it was discarded from the idle list after expiring. (2) WAITING - The connection is waiting for the number of client conns to drop below the maximum capacity. Calls may be in progress upon it from when it was active and got culled. The connection is on the rxrpc_waiting_client_conns list which is kept in to-be-granted order. Culled conns with waiters go to the back of the queue just like new conns. (3) ACTIVE - The connection has at least one call in progress upon it, it may freely grant available channels to new calls and calls may be waiting on it for channels to become available. The connection is on the rxrpc_active_client_conns list which is kept in activation order for culling purposes. (4) CULLED - The connection got summarily culled to try and free up capacity. Calls currently in progress on the connection are allowed to continue, but new calls will have to wait. There can be no waiters in this state - the conn would have to go to the WAITING state instead. (5) IDLE - The connection has no calls in progress upon it and must have been exposed to the world (ie. the EXPOSED flag must be set). When it expires, the EXPOSED flag is cleared and the connection transitions to the INACTIVE state. The connection is on the rxrpc_idle_client_conns list which is kept in order of how soon they'll expire. A connection in the ACTIVE or CULLED state must have at least one active call upon it; if in the WAITING state it may have active calls upon it; other states may not have active calls. As long as a connection remains active and doesn't get culled, it may continue to process calls - even if there are connections on the wait queue. This simplifies things a bit and reduces the amount of checking we need do. There are a couple flags of relevance to the cache: (1) EXPOSED - The connection ID got exposed to the world. If this flag is set, an extra ref is added to the connection preventing it from being reaped when it has no calls outstanding. This flag is cleared and the ref dropped when a conn is discarded from the idle list. (2) DONT_REUSE - The connection should be discarded as soon as possible and should not be reused. This commit also provides a number of new settings: (*) /proc/net/rxrpc/max_client_conns The maximum number of live client connections. Above this number, new connections get added to the wait list and must wait for an active conn to be culled. Culled connections can be reused, but they will go to the back of the wait list and have to wait. (*) /proc/net/rxrpc/reap_client_conns If the number of desired connections exceeds the maximum above, the active connection list will be culled until there are only this many left in it. (*) /proc/net/rxrpc/idle_conn_expiry The normal expiry time for a client connection, provided there are fewer than reap_client_conns of them around. (*) /proc/net/rxrpc/idle_conn_fast_expiry The expedited expiry time, used when there are more than reap_client_conns of them around. Note that I combined the Tx wait queue with the channel grant wait queue to save space as only one of these should be in use at once. Note also that, for the moment, the service connection cache still uses the old connection management code. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-24 09:30:52 +03:00
BUG();
rxrpc: Maintain an extra ref on a conn for the cache list Overhaul the usage count accounting for the rxrpc_connection struct to make it easier to implement RCU access from the data_ready handler. The problem is that currently we're using a lock to prevent the garbage collector from trying to clean up a connection that we're contemplating unidling. We could just stick incoming packets on the connection we find, but we've then got a problem that we may race when dispatching a work item to process it as we need to give that a ref to prevent the rxrpc_connection struct from disappearing in the meantime. Further, incoming packets may get discarded if attached to an rxrpc_connection struct that is going away. Whilst this is not a total disaster - the client will presumably resend - it would delay processing of the call. This would affect the AFS client filesystem's service manager operation. To this end: (1) We now maintain an extra count on the connection usage count whilst it is on the connection list. This mean it is not in use when its refcount is 1. (2) When trying to reuse an old connection, we only increment the refcount if it is greater than 0. If it is 0, we replace it in the tree with a new candidate connection. (3) Two connection flags are added to indicate whether or not a connection is in the local's client connection tree (used by sendmsg) or the peer's service connection tree (used by data_ready). This makes sure that we don't try and remove a connection if it got replaced. The flags are tested under lock with the removal operation to prevent the reaper from killing the rxrpc_connection struct whilst someone else is trying to effect a replacement. This could probably be alleviated by using memory barriers between the flag set/test and the rb_tree ops. The rb_tree op would still need to be under the lock, however. (4) When trying to reap an old connection, we try to flip the usage count from 1 to 0. If it's not 1 at that point, then it must've come back to life temporarily and we ignore it. Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-30 12:45:22 +03:00
else
rxrpc_unpublish_service_conn(conn);
list_move_tail(&conn->link, &graveyard);
}
write_unlock(&rxnet->conn_lock);
if (earliest != now + MAX_JIFFY_OFFSET) {
_debug("reschedule reaper %ld", (long)earliest - (long)now);
ASSERT(time_after(earliest, now));
rxrpc_set_service_reap_timer(rxnet, earliest);
}
while (!list_empty(&graveyard)) {
conn = list_entry(graveyard.next, struct rxrpc_connection,
link);
list_del_init(&conn->link);
ASSERTCMP(refcount_read(&conn->ref), ==, 0);
rxrpc: Improve management and caching of client connection objects Improve the management and caching of client rxrpc connection objects. From this point, client connections will be managed separately from service connections because AF_RXRPC controls the creation and re-use of client connections but doesn't have that luxury with service connections. Further, there will be limits on the numbers of client connections that may be live on a machine. No direct restriction will be placed on the number of client calls, excepting that each client connection can support a maximum of four concurrent calls. Note that, for a number of reasons, we don't want to simply discard a client connection as soon as the last call is apparently finished: (1) Security is negotiated per-connection and the context is then shared between all calls on that connection. The context can be negotiated again if the connection lapses, but that involves holding up calls whilst at least two packets are exchanged and various crypto bits are performed - so we'd ideally like to cache it for a little while at least. (2) If a packet goes astray, we will need to retransmit a final ACK or ABORT packet. To make this work, we need to keep around the connection details for a little while. (3) The locally held structures represent some amount of setup time, to be weighed against their occupation of memory when idle. To this end, the client connection cache is managed by a state machine on each connection. There are five states: (1) INACTIVE - The connection is not held in any list and may not have been exposed to the world. If it has been previously exposed, it was discarded from the idle list after expiring. (2) WAITING - The connection is waiting for the number of client conns to drop below the maximum capacity. Calls may be in progress upon it from when it was active and got culled. The connection is on the rxrpc_waiting_client_conns list which is kept in to-be-granted order. Culled conns with waiters go to the back of the queue just like new conns. (3) ACTIVE - The connection has at least one call in progress upon it, it may freely grant available channels to new calls and calls may be waiting on it for channels to become available. The connection is on the rxrpc_active_client_conns list which is kept in activation order for culling purposes. (4) CULLED - The connection got summarily culled to try and free up capacity. Calls currently in progress on the connection are allowed to continue, but new calls will have to wait. There can be no waiters in this state - the conn would have to go to the WAITING state instead. (5) IDLE - The connection has no calls in progress upon it and must have been exposed to the world (ie. the EXPOSED flag must be set). When it expires, the EXPOSED flag is cleared and the connection transitions to the INACTIVE state. The connection is on the rxrpc_idle_client_conns list which is kept in order of how soon they'll expire. A connection in the ACTIVE or CULLED state must have at least one active call upon it; if in the WAITING state it may have active calls upon it; other states may not have active calls. As long as a connection remains active and doesn't get culled, it may continue to process calls - even if there are connections on the wait queue. This simplifies things a bit and reduces the amount of checking we need do. There are a couple flags of relevance to the cache: (1) EXPOSED - The connection ID got exposed to the world. If this flag is set, an extra ref is added to the connection preventing it from being reaped when it has no calls outstanding. This flag is cleared and the ref dropped when a conn is discarded from the idle list. (2) DONT_REUSE - The connection should be discarded as soon as possible and should not be reused. This commit also provides a number of new settings: (*) /proc/net/rxrpc/max_client_conns The maximum number of live client connections. Above this number, new connections get added to the wait list and must wait for an active conn to be culled. Culled connections can be reused, but they will go to the back of the wait list and have to wait. (*) /proc/net/rxrpc/reap_client_conns If the number of desired connections exceeds the maximum above, the active connection list will be culled until there are only this many left in it. (*) /proc/net/rxrpc/idle_conn_expiry The normal expiry time for a client connection, provided there are fewer than reap_client_conns of them around. (*) /proc/net/rxrpc/idle_conn_fast_expiry The expedited expiry time, used when there are more than reap_client_conns of them around. Note that I combined the Tx wait queue with the channel grant wait queue to save space as only one of these should be in use at once. Note also that, for the moment, the service connection cache still uses the old connection management code. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-24 09:30:52 +03:00
rxrpc_kill_connection(conn);
}
_leave("");
}
/*
rxrpc: Improve management and caching of client connection objects Improve the management and caching of client rxrpc connection objects. From this point, client connections will be managed separately from service connections because AF_RXRPC controls the creation and re-use of client connections but doesn't have that luxury with service connections. Further, there will be limits on the numbers of client connections that may be live on a machine. No direct restriction will be placed on the number of client calls, excepting that each client connection can support a maximum of four concurrent calls. Note that, for a number of reasons, we don't want to simply discard a client connection as soon as the last call is apparently finished: (1) Security is negotiated per-connection and the context is then shared between all calls on that connection. The context can be negotiated again if the connection lapses, but that involves holding up calls whilst at least two packets are exchanged and various crypto bits are performed - so we'd ideally like to cache it for a little while at least. (2) If a packet goes astray, we will need to retransmit a final ACK or ABORT packet. To make this work, we need to keep around the connection details for a little while. (3) The locally held structures represent some amount of setup time, to be weighed against their occupation of memory when idle. To this end, the client connection cache is managed by a state machine on each connection. There are five states: (1) INACTIVE - The connection is not held in any list and may not have been exposed to the world. If it has been previously exposed, it was discarded from the idle list after expiring. (2) WAITING - The connection is waiting for the number of client conns to drop below the maximum capacity. Calls may be in progress upon it from when it was active and got culled. The connection is on the rxrpc_waiting_client_conns list which is kept in to-be-granted order. Culled conns with waiters go to the back of the queue just like new conns. (3) ACTIVE - The connection has at least one call in progress upon it, it may freely grant available channels to new calls and calls may be waiting on it for channels to become available. The connection is on the rxrpc_active_client_conns list which is kept in activation order for culling purposes. (4) CULLED - The connection got summarily culled to try and free up capacity. Calls currently in progress on the connection are allowed to continue, but new calls will have to wait. There can be no waiters in this state - the conn would have to go to the WAITING state instead. (5) IDLE - The connection has no calls in progress upon it and must have been exposed to the world (ie. the EXPOSED flag must be set). When it expires, the EXPOSED flag is cleared and the connection transitions to the INACTIVE state. The connection is on the rxrpc_idle_client_conns list which is kept in order of how soon they'll expire. A connection in the ACTIVE or CULLED state must have at least one active call upon it; if in the WAITING state it may have active calls upon it; other states may not have active calls. As long as a connection remains active and doesn't get culled, it may continue to process calls - even if there are connections on the wait queue. This simplifies things a bit and reduces the amount of checking we need do. There are a couple flags of relevance to the cache: (1) EXPOSED - The connection ID got exposed to the world. If this flag is set, an extra ref is added to the connection preventing it from being reaped when it has no calls outstanding. This flag is cleared and the ref dropped when a conn is discarded from the idle list. (2) DONT_REUSE - The connection should be discarded as soon as possible and should not be reused. This commit also provides a number of new settings: (*) /proc/net/rxrpc/max_client_conns The maximum number of live client connections. Above this number, new connections get added to the wait list and must wait for an active conn to be culled. Culled connections can be reused, but they will go to the back of the wait list and have to wait. (*) /proc/net/rxrpc/reap_client_conns If the number of desired connections exceeds the maximum above, the active connection list will be culled until there are only this many left in it. (*) /proc/net/rxrpc/idle_conn_expiry The normal expiry time for a client connection, provided there are fewer than reap_client_conns of them around. (*) /proc/net/rxrpc/idle_conn_fast_expiry The expedited expiry time, used when there are more than reap_client_conns of them around. Note that I combined the Tx wait queue with the channel grant wait queue to save space as only one of these should be in use at once. Note also that, for the moment, the service connection cache still uses the old connection management code. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-24 09:30:52 +03:00
* preemptively destroy all the service connection records rather than
* waiting for them to time out
*/
void rxrpc_destroy_all_connections(struct rxrpc_net *rxnet)
{
struct rxrpc_connection *conn, *_p;
bool leak = false;
_enter("");
atomic_dec(&rxnet->nr_conns);
rxrpc_destroy_all_client_connections(rxnet);
rxrpc: Improve management and caching of client connection objects Improve the management and caching of client rxrpc connection objects. From this point, client connections will be managed separately from service connections because AF_RXRPC controls the creation and re-use of client connections but doesn't have that luxury with service connections. Further, there will be limits on the numbers of client connections that may be live on a machine. No direct restriction will be placed on the number of client calls, excepting that each client connection can support a maximum of four concurrent calls. Note that, for a number of reasons, we don't want to simply discard a client connection as soon as the last call is apparently finished: (1) Security is negotiated per-connection and the context is then shared between all calls on that connection. The context can be negotiated again if the connection lapses, but that involves holding up calls whilst at least two packets are exchanged and various crypto bits are performed - so we'd ideally like to cache it for a little while at least. (2) If a packet goes astray, we will need to retransmit a final ACK or ABORT packet. To make this work, we need to keep around the connection details for a little while. (3) The locally held structures represent some amount of setup time, to be weighed against their occupation of memory when idle. To this end, the client connection cache is managed by a state machine on each connection. There are five states: (1) INACTIVE - The connection is not held in any list and may not have been exposed to the world. If it has been previously exposed, it was discarded from the idle list after expiring. (2) WAITING - The connection is waiting for the number of client conns to drop below the maximum capacity. Calls may be in progress upon it from when it was active and got culled. The connection is on the rxrpc_waiting_client_conns list which is kept in to-be-granted order. Culled conns with waiters go to the back of the queue just like new conns. (3) ACTIVE - The connection has at least one call in progress upon it, it may freely grant available channels to new calls and calls may be waiting on it for channels to become available. The connection is on the rxrpc_active_client_conns list which is kept in activation order for culling purposes. (4) CULLED - The connection got summarily culled to try and free up capacity. Calls currently in progress on the connection are allowed to continue, but new calls will have to wait. There can be no waiters in this state - the conn would have to go to the WAITING state instead. (5) IDLE - The connection has no calls in progress upon it and must have been exposed to the world (ie. the EXPOSED flag must be set). When it expires, the EXPOSED flag is cleared and the connection transitions to the INACTIVE state. The connection is on the rxrpc_idle_client_conns list which is kept in order of how soon they'll expire. A connection in the ACTIVE or CULLED state must have at least one active call upon it; if in the WAITING state it may have active calls upon it; other states may not have active calls. As long as a connection remains active and doesn't get culled, it may continue to process calls - even if there are connections on the wait queue. This simplifies things a bit and reduces the amount of checking we need do. There are a couple flags of relevance to the cache: (1) EXPOSED - The connection ID got exposed to the world. If this flag is set, an extra ref is added to the connection preventing it from being reaped when it has no calls outstanding. This flag is cleared and the ref dropped when a conn is discarded from the idle list. (2) DONT_REUSE - The connection should be discarded as soon as possible and should not be reused. This commit also provides a number of new settings: (*) /proc/net/rxrpc/max_client_conns The maximum number of live client connections. Above this number, new connections get added to the wait list and must wait for an active conn to be culled. Culled connections can be reused, but they will go to the back of the wait list and have to wait. (*) /proc/net/rxrpc/reap_client_conns If the number of desired connections exceeds the maximum above, the active connection list will be culled until there are only this many left in it. (*) /proc/net/rxrpc/idle_conn_expiry The normal expiry time for a client connection, provided there are fewer than reap_client_conns of them around. (*) /proc/net/rxrpc/idle_conn_fast_expiry The expedited expiry time, used when there are more than reap_client_conns of them around. Note that I combined the Tx wait queue with the channel grant wait queue to save space as only one of these should be in use at once. Note also that, for the moment, the service connection cache still uses the old connection management code. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-24 09:30:52 +03:00
del_timer_sync(&rxnet->service_conn_reap_timer);
rxrpc_queue_work(&rxnet->service_conn_reaper);
flush_workqueue(rxrpc_workqueue);
write_lock(&rxnet->conn_lock);
list_for_each_entry_safe(conn, _p, &rxnet->service_conns, link) {
pr_err("AF_RXRPC: Leaked conn %p {%d}\n",
conn, refcount_read(&conn->ref));
leak = true;
}
write_unlock(&rxnet->conn_lock);
BUG_ON(leak);
ASSERT(list_empty(&rxnet->conn_proc_list));
/* We need to wait for the connections to be destroyed by RCU as they
* pin things that we still need to get rid of.
*/
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next Pull networking updates from David Miller: 1) Support offloading wireless authentication to userspace via NL80211_CMD_EXTERNAL_AUTH, from Srinivas Dasari. 2) A lot of work on network namespace setup/teardown from Kirill Tkhai. Setup and cleanup of namespaces now all run asynchronously and thus performance is significantly increased. 3) Add rx/tx timestamping support to mv88e6xxx driver, from Brandon Streiff. 4) Support zerocopy on RDS sockets, from Sowmini Varadhan. 5) Use denser instruction encoding in x86 eBPF JIT, from Daniel Borkmann. 6) Support hw offload of vlan filtering in mvpp2 dreiver, from Maxime Chevallier. 7) Support grafting of child qdiscs in mlxsw driver, from Nogah Frankel. 8) Add packet forwarding tests to selftests, from Ido Schimmel. 9) Deal with sub-optimal GSO packets better in BBR congestion control, from Eric Dumazet. 10) Support 5-tuple hashing in ipv6 multipath routing, from David Ahern. 11) Add path MTU tests to selftests, from Stefano Brivio. 12) Various bits of IPSEC offloading support for mlx5, from Aviad Yehezkel, Yossi Kuperman, and Saeed Mahameed. 13) Support RSS spreading on ntuple filters in SFC driver, from Edward Cree. 14) Lots of sockmap work from John Fastabend. Applications can use eBPF to filter sendmsg and sendpage operations. 15) In-kernel receive TLS support, from Dave Watson. 16) Add XDP support to ixgbevf, this is significant because it should allow optimized XDP usage in various cloud environments. From Tony Nguyen. 17) Add new Intel E800 series "ice" ethernet driver, from Anirudh Venkataramanan et al. 18) IP fragmentation match offload support in nfp driver, from Pieter Jansen van Vuuren. 19) Support XDP redirect in i40e driver, from Björn Töpel. 20) Add BPF_RAW_TRACEPOINT program type for accessing the arguments of tracepoints in their raw form, from Alexei Starovoitov. 21) Lots of striding RQ improvements to mlx5 driver with many performance improvements, from Tariq Toukan. 22) Use rhashtable for inet frag reassembly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1678 commits) net: mvneta: improve suspend/resume net: mvneta: split rxq/txq init and txq deinit into SW and HW parts ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_thresh net: bgmac: Fix endian access in bgmac_dma_tx_ring_free() net: bgmac: Correctly annotate register space route: check sysctl_fib_multipath_use_neigh earlier than hash fix typo in command value in drivers/net/phy/mdio-bitbang. sky2: Increase D3 delay to sky2 stops working after suspend net/mlx5e: Set EQE based as default TX interrupt moderation mode ibmvnic: Disable irqs before exiting reset from closed state net: sched: do not emit messages while holding spinlock vlan: also check phy_driver ts_info for vlan's real device Bluetooth: Mark expected switch fall-throughs Bluetooth: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for BTUSB_QCA_ROME Bluetooth: btrsi: remove unused including <linux/version.h> Bluetooth: hci_bcm: Remove DMI quirk for the MINIX Z83-4 sh_eth: kill useless check in __sh_eth_get_regs() sh_eth: add sh_eth_cpu_data::no_xdfar flag ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data() ipv4: factorize sk_wmem_alloc updates done by __ip_append_data() ...
2018-04-04 00:04:18 +03:00
wait_var_event(&rxnet->nr_conns, !atomic_read(&rxnet->nr_conns));
_leave("");
}