WSL2-Linux-Kernel/arch/arm/mach-mvebu/kirkwood.c

194 строки
4.7 KiB
C
Исходник Обычный вид История

/*
* Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
*
* arch/arm/mach-mvebu/kirkwood.c
*
* Flattened Device Tree board initialization
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_net.h>
#include <linux/of_platform.h>
#include <linux/slab.h>
#include <asm/hardware/cache-feroceon-l2.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "kirkwood.h"
#include "kirkwood-pm.h"
#include "common.h"
static struct resource kirkwood_cpufreq_resources[] = {
[0] = {
.start = CPU_CONTROL_PHYS,
.end = CPU_CONTROL_PHYS + 3,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device kirkwood_cpufreq_device = {
.name = "kirkwood-cpufreq",
.id = -1,
.num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources),
.resource = kirkwood_cpufreq_resources,
};
static void __init kirkwood_cpufreq_init(void)
{
platform_device_register(&kirkwood_cpufreq_device);
}
static struct resource kirkwood_cpuidle_resource[] = {
{
.flags = IORESOURCE_MEM,
.start = DDR_OPERATION_BASE,
.end = DDR_OPERATION_BASE + 3,
},
};
static struct platform_device kirkwood_cpuidle = {
.name = "kirkwood_cpuidle",
.id = -1,
.resource = kirkwood_cpuidle_resource,
.num_resources = 1,
};
static void __init kirkwood_cpuidle_init(void)
{
platform_device_register(&kirkwood_cpuidle);
}
#define MV643XX_ETH_MAC_ADDR_LOW 0x0414
#define MV643XX_ETH_MAC_ADDR_HIGH 0x0418
static void __init kirkwood_dt_eth_fixup(void)
{
struct device_node *np;
/*
* The ethernet interfaces forget the MAC address assigned by u-boot
* if the clocks are turned off. Usually, u-boot on kirkwood boards
* has no DT support to properly set local-mac-address property.
* As a workaround, we get the MAC address from mv643xx_eth registers
* and update the port device node if no valid MAC address is set.
*/
for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") {
struct device_node *pnp = of_get_parent(np);
struct clk *clk;
struct property *pmac;
void __iomem *io;
u8 *macaddr;
u32 reg;
if (!pnp)
continue;
/* skip disabled nodes or nodes with valid MAC address*/
if (!of_device_is_available(pnp) ||
!IS_ERR(of_get_mac_address(np)))
goto eth_fixup_skip;
clk = of_clk_get(pnp, 0);
if (IS_ERR(clk))
goto eth_fixup_skip;
io = of_iomap(pnp, 0);
if (!io)
goto eth_fixup_no_map;
/* ensure port clock is not gated to not hang CPU */
clk_prepare_enable(clk);
/* store MAC address register contents in local-mac-address */
pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL);
if (!pmac)
goto eth_fixup_no_mem;
pmac->value = pmac + 1;
pmac->length = 6;
pmac->name = kstrdup("local-mac-address", GFP_KERNEL);
if (!pmac->name) {
kfree(pmac);
goto eth_fixup_no_mem;
}
macaddr = pmac->value;
reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH);
macaddr[0] = (reg >> 24) & 0xff;
macaddr[1] = (reg >> 16) & 0xff;
macaddr[2] = (reg >> 8) & 0xff;
macaddr[3] = reg & 0xff;
reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW);
macaddr[4] = (reg >> 8) & 0xff;
macaddr[5] = reg & 0xff;
of_update_property(np, pmac);
eth_fixup_no_mem:
iounmap(io);
clk_disable_unprepare(clk);
eth_fixup_no_map:
clk_put(clk);
eth_fixup_skip:
of_node_put(pnp);
}
}
/*
* Disable propagation of mbus errors to the CPU local bus, as this
* causes mbus errors (which can occur for example for PCI aborts) to
* throw CPU aborts, which we're not set up to deal with.
*/
static void kirkwood_disable_mbus_error_propagation(void)
{
void __iomem *cpu_config;
cpu_config = ioremap(CPU_CONFIG_PHYS, 4);
writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config);
}
static struct of_dev_auxdata auxdata[] __initdata = {
OF_DEV_AUXDATA("marvell,kirkwood-audio", 0xf10a0000,
"mvebu-audio", NULL),
{ /* sentinel */ }
};
static void __init kirkwood_dt_init(void)
{
kirkwood_disable_mbus_error_propagation();
BUG_ON(mvebu_mbus_dt_init(false));
#ifdef CONFIG_CACHE_FEROCEON_L2
feroceon_of_init();
#endif
kirkwood_cpufreq_init();
kirkwood_cpuidle_init();
kirkwood_pm_init();
kirkwood_dt_eth_fixup();
of_platform_default_populate(NULL, auxdata, NULL);
}
static const char * const kirkwood_dt_board_compat[] __initconst = {
"marvell,kirkwood",
NULL
};
DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
/* Maintainer: Jason Cooper <jason@lakedaemon.net> */
.init_machine = kirkwood_dt_init,
.restart = mvebu_restart,
.dt_compat = kirkwood_dt_board_compat,
MACHINE_END