WSL2-Linux-Kernel/security/integrity/evm/evm_main.c

321 строка
8.3 KiB
C
Исходник Обычный вид История

evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 23:12:09 +03:00
/*
* Copyright (C) 2005-2010 IBM Corporation
*
* Author:
* Mimi Zohar <zohar@us.ibm.com>
* Kylene Hall <kjhall@us.ibm.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, version 2 of the License.
*
* File: evm_main.c
* implements evm_inode_setxattr, evm_inode_post_setxattr,
* evm_inode_removexattr, and evm_verifyxattr
*/
#include <linux/module.h>
#include <linux/crypto.h>
#include <linux/xattr.h>
#include <linux/integrity.h>
#include <linux/evm.h>
#include <crypto/hash.h>
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 23:12:09 +03:00
#include "evm.h"
int evm_initialized;
char *evm_hmac = "hmac(sha1)";
char *evm_config_xattrnames[] = {
#ifdef CONFIG_SECURITY_SELINUX
XATTR_NAME_SELINUX,
#endif
#ifdef CONFIG_SECURITY_SMACK
XATTR_NAME_SMACK,
#endif
XATTR_NAME_CAPS,
NULL
};
/*
* evm_verify_hmac - calculate and compare the HMAC with the EVM xattr
*
* Compute the HMAC on the dentry's protected set of extended attributes
* and compare it against the stored security.evm xattr. (For performance,
* use the previoulsy retrieved xattr value and length to calculate the
* HMAC.)
*
* Returns integrity status
*/
static enum integrity_status evm_verify_hmac(struct dentry *dentry,
const char *xattr_name,
char *xattr_value,
size_t xattr_value_len,
struct integrity_iint_cache *iint)
{
struct evm_ima_xattr_data xattr_data;
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 23:12:09 +03:00
int rc;
if (iint->hmac_status == INTEGRITY_PASS)
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 23:12:09 +03:00
return iint->hmac_status;
/* if status is not PASS, try to check again - against -ENOMEM */
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 23:12:09 +03:00
rc = evm_calc_hmac(dentry, xattr_name, xattr_value,
xattr_value_len, xattr_data.digest);
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 23:12:09 +03:00
if (rc < 0)
goto err_out;
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 23:12:09 +03:00
xattr_data.type = EVM_XATTR_HMAC;
rc = vfs_xattr_cmp(dentry, XATTR_NAME_EVM, (u8 *)&xattr_data,
sizeof xattr_data, GFP_NOFS);
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 23:12:09 +03:00
if (rc < 0)
goto err_out;
iint->hmac_status = INTEGRITY_PASS;
return iint->hmac_status;
err_out:
switch (rc) {
case -ENODATA: /* file not labelled */
iint->hmac_status = INTEGRITY_NOLABEL;
break;
default:
iint->hmac_status = INTEGRITY_FAIL;
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 23:12:09 +03:00
}
return iint->hmac_status;
}
static int evm_protected_xattr(const char *req_xattr_name)
{
char **xattrname;
int namelen;
int found = 0;
namelen = strlen(req_xattr_name);
for (xattrname = evm_config_xattrnames; *xattrname != NULL; xattrname++) {
if ((strlen(*xattrname) == namelen)
&& (strncmp(req_xattr_name, *xattrname, namelen) == 0)) {
found = 1;
break;
}
if (strncmp(req_xattr_name,
*xattrname + XATTR_SECURITY_PREFIX_LEN,
strlen(req_xattr_name)) == 0) {
found = 1;
break;
}
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 23:12:09 +03:00
}
return found;
}
/**
* evm_verifyxattr - verify the integrity of the requested xattr
* @dentry: object of the verify xattr
* @xattr_name: requested xattr
* @xattr_value: requested xattr value
* @xattr_value_len: requested xattr value length
*
* Calculate the HMAC for the given dentry and verify it against the stored
* security.evm xattr. For performance, use the xattr value and length
* previously retrieved to calculate the HMAC.
*
* Returns the xattr integrity status.
*
* This function requires the caller to lock the inode's i_mutex before it
* is executed.
*/
enum integrity_status evm_verifyxattr(struct dentry *dentry,
const char *xattr_name,
void *xattr_value, size_t xattr_value_len,
struct integrity_iint_cache *iint)
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 23:12:09 +03:00
{
if (!evm_initialized || !evm_protected_xattr(xattr_name))
return INTEGRITY_UNKNOWN;
if (!iint) {
iint = integrity_iint_find(dentry->d_inode);
if (!iint)
return INTEGRITY_UNKNOWN;
}
return evm_verify_hmac(dentry, xattr_name, xattr_value,
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 23:12:09 +03:00
xattr_value_len, iint);
}
EXPORT_SYMBOL_GPL(evm_verifyxattr);
/*
* evm_protect_xattr - protect the EVM extended attribute
*
* Prevent security.evm from being modified or removed.
*/
static int evm_protect_xattr(struct dentry *dentry, const char *xattr_name,
const void *xattr_value, size_t xattr_value_len)
{
if (strcmp(xattr_name, XATTR_NAME_EVM) == 0) {
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
}
return 0;
}
/**
* evm_inode_setxattr - protect the EVM extended attribute
* @dentry: pointer to the affected dentry
* @xattr_name: pointer to the affected extended attribute name
* @xattr_value: pointer to the new extended attribute value
* @xattr_value_len: pointer to the new extended attribute value length
*
* Prevent 'security.evm' from being modified
*/
int evm_inode_setxattr(struct dentry *dentry, const char *xattr_name,
const void *xattr_value, size_t xattr_value_len)
{
return evm_protect_xattr(dentry, xattr_name, xattr_value,
xattr_value_len);
}
/**
* evm_inode_removexattr - protect the EVM extended attribute
* @dentry: pointer to the affected dentry
* @xattr_name: pointer to the affected extended attribute name
*
* Prevent 'security.evm' from being removed.
*/
int evm_inode_removexattr(struct dentry *dentry, const char *xattr_name)
{
return evm_protect_xattr(dentry, xattr_name, NULL, 0);
}
/**
* evm_inode_post_setxattr - update 'security.evm' to reflect the changes
* @dentry: pointer to the affected dentry
* @xattr_name: pointer to the affected extended attribute name
* @xattr_value: pointer to the new extended attribute value
* @xattr_value_len: pointer to the new extended attribute value length
*
* Update the HMAC stored in 'security.evm' to reflect the change.
*
* No need to take the i_mutex lock here, as this function is called from
* __vfs_setxattr_noperm(). The caller of which has taken the inode's
* i_mutex lock.
*/
void evm_inode_post_setxattr(struct dentry *dentry, const char *xattr_name,
const void *xattr_value, size_t xattr_value_len)
{
if (!evm_initialized || !evm_protected_xattr(xattr_name))
return;
evm_update_evmxattr(dentry, xattr_name, xattr_value, xattr_value_len);
return;
}
/**
* evm_inode_post_removexattr - update 'security.evm' after removing the xattr
* @dentry: pointer to the affected dentry
* @xattr_name: pointer to the affected extended attribute name
*
* Update the HMAC stored in 'security.evm' to reflect removal of the xattr.
*/
void evm_inode_post_removexattr(struct dentry *dentry, const char *xattr_name)
{
struct inode *inode = dentry->d_inode;
if (!evm_initialized || !evm_protected_xattr(xattr_name))
return;
mutex_lock(&inode->i_mutex);
evm_update_evmxattr(dentry, xattr_name, NULL, 0);
mutex_unlock(&inode->i_mutex);
return;
}
/**
* evm_inode_post_setattr - update 'security.evm' after modifying metadata
* @dentry: pointer to the affected dentry
* @ia_valid: for the UID and GID status
*
* For now, update the HMAC stored in 'security.evm' to reflect UID/GID
* changes.
*
* This function is called from notify_change(), which expects the caller
* to lock the inode's i_mutex.
*/
void evm_inode_post_setattr(struct dentry *dentry, int ia_valid)
{
if (!evm_initialized)
return;
if (ia_valid & (ATTR_MODE | ATTR_UID | ATTR_GID))
evm_update_evmxattr(dentry, NULL, NULL, 0);
return;
}
/*
* evm_inode_init_security - initializes security.evm
*/
int evm_inode_init_security(struct inode *inode,
const struct xattr *lsm_xattr,
struct xattr *evm_xattr)
{
struct evm_ima_xattr_data *xattr_data;
int rc;
if (!evm_initialized || !evm_protected_xattr(lsm_xattr->name))
return -EOPNOTSUPP;
xattr_data = kzalloc(sizeof(*xattr_data), GFP_NOFS);
if (!xattr_data)
return -ENOMEM;
xattr_data->type = EVM_XATTR_HMAC;
rc = evm_init_hmac(inode, lsm_xattr, xattr_data->digest);
if (rc < 0)
goto out;
evm_xattr->value = xattr_data;
evm_xattr->value_len = sizeof(*xattr_data);
evm_xattr->name = kstrdup(XATTR_EVM_SUFFIX, GFP_NOFS);
return 0;
out:
kfree(xattr_data);
return rc;
}
EXPORT_SYMBOL_GPL(evm_inode_init_security);
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 23:12:09 +03:00
static int __init init_evm(void)
{
int error;
error = evm_init_secfs();
if (error < 0) {
printk(KERN_INFO "EVM: Error registering secfs\n");
goto err;
}
err:
return error;
}
static void __exit cleanup_evm(void)
{
evm_cleanup_secfs();
if (hmac_tfm)
crypto_free_shash(hmac_tfm);
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 23:12:09 +03:00
}
/*
* evm_display_config - list the EVM protected security extended attributes
*/
static int __init evm_display_config(void)
{
char **xattrname;
for (xattrname = evm_config_xattrnames; *xattrname != NULL; xattrname++)
printk(KERN_INFO "EVM: %s\n", *xattrname);
return 0;
}
pure_initcall(evm_display_config);
late_initcall(init_evm);
MODULE_DESCRIPTION("Extended Verification Module");
MODULE_LICENSE("GPL");