WSL2-Linux-Kernel/drivers/ide/falconide.c

179 строки
3.9 KiB
C
Исходник Обычный вид История

/*
* Atari Falcon IDE Driver
*
* Created 12 Jul 1997 by Geert Uytterhoeven
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/blkdev.h>
#include <linux/ide.h>
#include <linux/init.h>
#include <asm/setup.h>
#include <asm/atarihw.h>
#include <asm/atariints.h>
#include <asm/atari_stdma.h>
#include <asm/ide.h>
#define DRV_NAME "falconide"
/*
* Base of the IDE interface
*/
#define ATA_HD_BASE 0xfff00000
/*
* Offsets from the above base
*/
#define ATA_HD_CONTROL 0x39
/*
* falconide_intr_lock is used to obtain access to the IDE interrupt,
* which is shared between several drivers.
*/
static int falconide_intr_lock;
static void falconide_release_lock(void)
{
if (falconide_intr_lock == 0) {
printk(KERN_ERR "%s: bug\n", __func__);
return;
}
falconide_intr_lock = 0;
stdma_release();
}
static void falconide_get_lock(irq_handler_t handler, void *data)
{
if (falconide_intr_lock == 0) {
if (in_interrupt() > 0)
panic("Falcon IDE hasn't ST-DMA lock in interrupt");
stdma_lock(handler, data);
falconide_intr_lock = 1;
}
}
static void falconide_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
void *buf, unsigned int len)
{
unsigned long data_addr = drive->hwif->io_ports.data_addr;
if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) {
__ide_mm_insw(data_addr, buf, (len + 1) / 2);
return;
}
raw_insw_swapw((u16 *)data_addr, buf, (len + 1) / 2);
}
static void falconide_output_data(ide_drive_t *drive, struct ide_cmd *cmd,
void *buf, unsigned int len)
{
unsigned long data_addr = drive->hwif->io_ports.data_addr;
if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) {
__ide_mm_outsw(data_addr, buf, (len + 1) / 2);
return;
}
raw_outsw_swapw((u16 *)data_addr, buf, (len + 1) / 2);
}
/* Atari has a byte-swapped IDE interface */
static const struct ide_tp_ops falconide_tp_ops = {
.exec_command = ide_exec_command,
.read_status = ide_read_status,
.read_altstatus = ide_read_altstatus,
.write_devctl = ide_write_devctl,
.dev_select = ide_dev_select,
.tf_load = ide_tf_load,
.tf_read = ide_tf_read,
.input_data = falconide_input_data,
.output_data = falconide_output_data,
};
static const struct ide_port_info falconide_port_info = {
.get_lock = falconide_get_lock,
.release_lock = falconide_release_lock,
.tp_ops = &falconide_tp_ops,
.host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_SERIALIZE |
IDE_HFLAG_NO_DMA,
.irq_flags = IRQF_SHARED,
.chipset = ide_generic,
};
static void __init falconide_setup_ports(struct ide_hw *hw)
{
int i;
memset(hw, 0, sizeof(*hw));
hw->io_ports.data_addr = ATA_HD_BASE;
for (i = 1; i < 8; i++)
hw->io_ports_array[i] = ATA_HD_BASE + 1 + i * 4;
hw->io_ports.ctl_addr = ATA_HD_BASE + ATA_HD_CONTROL;
hw->irq = IRQ_MFP_IDE;
}
/*
* Probe for a Falcon IDE interface
*/
ide: make remaining built-in only IDE host drivers modular (take 2) * Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c file for probing PCI host drivers registered with IDE core (special case for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of the ordering in which all IDE host drivers are probed when IDE is built-in during link time. * Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific). * Move probing of ide-cris (cris arch specific) host driver before cmd640 (x86 arch specific). * Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300 (h8300 arch specific). * Add "probe_vlb" kernel parameter to cmd640 host driver and update Documentation/ide.txt accordingly. * Make IDE_ARM config option visible so it can also be disabled if needed. * Remove bogus comment from ide.c while at it. v2: * Fix two issues spotted by Sergei: - replace ENOMEM error value by ENOENT in ide-h8300 host driver - fix MODULE_PARM_DESC() in cmd640 host driver Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26 22:13:07 +03:00
static int __init falconide_init(void)
{
struct ide_host *host;
struct ide_hw hw, *hws[] = { &hw };
int rc;
if (!MACH_IS_ATARI || !ATARIHW_PRESENT(IDE))
return -ENODEV;
printk(KERN_INFO "ide: Falcon IDE controller\n");
if (!request_mem_region(ATA_HD_BASE, 0x40, DRV_NAME)) {
printk(KERN_ERR "%s: resources busy\n", DRV_NAME);
return -EBUSY;
}
falconide_setup_ports(&hw);
host = ide_host_alloc(&falconide_port_info, hws, 1);
if (host == NULL) {
rc = -ENOMEM;
goto err;
}
ide: make remaining built-in only IDE host drivers modular (take 2) * Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c file for probing PCI host drivers registered with IDE core (special case for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of the ordering in which all IDE host drivers are probed when IDE is built-in during link time. * Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific). * Move probing of ide-cris (cris arch specific) host driver before cmd640 (x86 arch specific). * Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300 (h8300 arch specific). * Add "probe_vlb" kernel parameter to cmd640 host driver and update Documentation/ide.txt accordingly. * Make IDE_ARM config option visible so it can also be disabled if needed. * Remove bogus comment from ide.c while at it. v2: * Fix two issues spotted by Sergei: - replace ENOMEM error value by ENOENT in ide-h8300 host driver - fix MODULE_PARM_DESC() in cmd640 host driver Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26 22:13:07 +03:00
falconide_get_lock(NULL, NULL);
rc = ide_host_register(host, &falconide_port_info, hws);
falconide_release_lock();
if (rc)
goto err_free;
return 0;
err_free:
ide_host_free(host);
err:
release_mem_region(ATA_HD_BASE, 0x40);
return rc;
}
ide: make remaining built-in only IDE host drivers modular (take 2) * Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c file for probing PCI host drivers registered with IDE core (special case for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of the ordering in which all IDE host drivers are probed when IDE is built-in during link time. * Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific). * Move probing of ide-cris (cris arch specific) host driver before cmd640 (x86 arch specific). * Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300 (h8300 arch specific). * Add "probe_vlb" kernel parameter to cmd640 host driver and update Documentation/ide.txt accordingly. * Make IDE_ARM config option visible so it can also be disabled if needed. * Remove bogus comment from ide.c while at it. v2: * Fix two issues spotted by Sergei: - replace ENOMEM error value by ENOENT in ide-h8300 host driver - fix MODULE_PARM_DESC() in cmd640 host driver Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26 22:13:07 +03:00
module_init(falconide_init);
MODULE_LICENSE("GPL");