WSL2-Linux-Kernel/drivers/hid/hid-samsung.c

128 строки
3.4 KiB
C
Исходник Обычный вид История

/*
* HID driver for some samsung "special" devices
*
* Copyright (c) 1999 Andreas Gal
* Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
* Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
* Copyright (c) 2006-2007 Jiri Kosina
* Copyright (c) 2007 Paul Walmsley
* Copyright (c) 2008 Jiri Slaby
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*/
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
#include "hid-ids.h"
/*
* Samsung IrDA remote controller (reports as Cypress USB Mouse).
*
HID: Support new variants of Samsung USB IR receiver (0419:0001) This patch extends the existing Samsung IrDA (0419:0001) quirk file with newly reported variants: * New device variants with 203 byte and 135 byte report descriptors were reported to be recognized incorrectly. This patch adds an autodetection for those two, using report descriptor size to enable new quirks. * Any other unknown 0419:0001 variants will now be treated without any quirk flags (i.e. IGNORE_HIDINPUT/HIDDEV_FORCE will not be set by default anymore). More details: 1. Descriptor size 184 bytes ("Satelco bundled remote") Already supported since kernel 2.6.25 (my old patch). 2. Descriptor size 203 bytes ("Optronix remote") This receiver mostly works with the regular HID input driver. Only when some keys are released, another spurious key press event is interpreted due to incorrect array ranges. According to HID 1.11, section 6.2.2.5, arrays should return a 0 value when no control is asserted, and ranges should go from 1 to the number of elements. The patch clips the value with a logical range from 1..15 (instead of originally 0..18). Ticket with more information available at https://bugs.launchpad.net/bugs/326986 3. Descriptor size 135 bytes ("Gotview remote") This receiver has a similar issue than the previous one, i.e. it mostly works with regular HID input, except some key press events get stuck on key release. The patch clips the array value from 1..14 (instead of originally 0..17). Ticket with more information available at http://bugs.archlinux.org/task/15216 4. Other unknown variants (found one report with 218 bytes, but no further information about issues) For such unknown variants we should refrain from changing any device flags. Currently, HIDINPUT is suppressed and HIDDEV is enforced (because in 2.6.25 the quirk table did not yet allow differentiating variants and we did not expect variants either). Now we should be as strict as possible and enable it only for the first variant above. Signed-off-by: Robert Schedel <r.schedel@yahoo.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-23 13:26:48 +04:00
* There are several variants for 0419:0001:
*
* 1. 184 byte report descriptor
* Vendor specific report #4 has a size of 48 bit,
* and therefore is not accepted when inspecting the descriptors.
* As a workaround we reinterpret the report as:
* Variable type, count 6, size 8 bit, log. maximum 255
* The burden to reconstruct the data is moved into user space.
HID: Support new variants of Samsung USB IR receiver (0419:0001) This patch extends the existing Samsung IrDA (0419:0001) quirk file with newly reported variants: * New device variants with 203 byte and 135 byte report descriptors were reported to be recognized incorrectly. This patch adds an autodetection for those two, using report descriptor size to enable new quirks. * Any other unknown 0419:0001 variants will now be treated without any quirk flags (i.e. IGNORE_HIDINPUT/HIDDEV_FORCE will not be set by default anymore). More details: 1. Descriptor size 184 bytes ("Satelco bundled remote") Already supported since kernel 2.6.25 (my old patch). 2. Descriptor size 203 bytes ("Optronix remote") This receiver mostly works with the regular HID input driver. Only when some keys are released, another spurious key press event is interpreted due to incorrect array ranges. According to HID 1.11, section 6.2.2.5, arrays should return a 0 value when no control is asserted, and ranges should go from 1 to the number of elements. The patch clips the value with a logical range from 1..15 (instead of originally 0..18). Ticket with more information available at https://bugs.launchpad.net/bugs/326986 3. Descriptor size 135 bytes ("Gotview remote") This receiver has a similar issue than the previous one, i.e. it mostly works with regular HID input, except some key press events get stuck on key release. The patch clips the array value from 1..14 (instead of originally 0..17). Ticket with more information available at http://bugs.archlinux.org/task/15216 4. Other unknown variants (found one report with 218 bytes, but no further information about issues) For such unknown variants we should refrain from changing any device flags. Currently, HIDINPUT is suppressed and HIDDEV is enforced (because in 2.6.25 the quirk table did not yet allow differentiating variants and we did not expect variants either). Now we should be as strict as possible and enable it only for the first variant above. Signed-off-by: Robert Schedel <r.schedel@yahoo.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-23 13:26:48 +04:00
*
* 2. 203 byte report descriptor
* Report #4 has an array field with logical range 0..18 instead of 1..15.
*
* 3. 135 byte report descriptor
* Report #4 has an array field with logical range 0..17 instead of 1..14.
*/
static void samsung_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int rsize)
{
HID: Support new variants of Samsung USB IR receiver (0419:0001) This patch extends the existing Samsung IrDA (0419:0001) quirk file with newly reported variants: * New device variants with 203 byte and 135 byte report descriptors were reported to be recognized incorrectly. This patch adds an autodetection for those two, using report descriptor size to enable new quirks. * Any other unknown 0419:0001 variants will now be treated without any quirk flags (i.e. IGNORE_HIDINPUT/HIDDEV_FORCE will not be set by default anymore). More details: 1. Descriptor size 184 bytes ("Satelco bundled remote") Already supported since kernel 2.6.25 (my old patch). 2. Descriptor size 203 bytes ("Optronix remote") This receiver mostly works with the regular HID input driver. Only when some keys are released, another spurious key press event is interpreted due to incorrect array ranges. According to HID 1.11, section 6.2.2.5, arrays should return a 0 value when no control is asserted, and ranges should go from 1 to the number of elements. The patch clips the value with a logical range from 1..15 (instead of originally 0..18). Ticket with more information available at https://bugs.launchpad.net/bugs/326986 3. Descriptor size 135 bytes ("Gotview remote") This receiver has a similar issue than the previous one, i.e. it mostly works with regular HID input, except some key press events get stuck on key release. The patch clips the array value from 1..14 (instead of originally 0..17). Ticket with more information available at http://bugs.archlinux.org/task/15216 4. Other unknown variants (found one report with 218 bytes, but no further information about issues) For such unknown variants we should refrain from changing any device flags. Currently, HIDINPUT is suppressed and HIDDEV is enforced (because in 2.6.25 the quirk table did not yet allow differentiating variants and we did not expect variants either). Now we should be as strict as possible and enable it only for the first variant above. Signed-off-by: Robert Schedel <r.schedel@yahoo.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-23 13:26:48 +04:00
if (rsize == 184 && rdesc[175] == 0x25 && rdesc[176] == 0x40 &&
rdesc[177] == 0x75 && rdesc[178] == 0x30 &&
rdesc[179] == 0x95 && rdesc[180] == 0x01 &&
rdesc[182] == 0x40) {
HID: Support new variants of Samsung USB IR receiver (0419:0001) This patch extends the existing Samsung IrDA (0419:0001) quirk file with newly reported variants: * New device variants with 203 byte and 135 byte report descriptors were reported to be recognized incorrectly. This patch adds an autodetection for those two, using report descriptor size to enable new quirks. * Any other unknown 0419:0001 variants will now be treated without any quirk flags (i.e. IGNORE_HIDINPUT/HIDDEV_FORCE will not be set by default anymore). More details: 1. Descriptor size 184 bytes ("Satelco bundled remote") Already supported since kernel 2.6.25 (my old patch). 2. Descriptor size 203 bytes ("Optronix remote") This receiver mostly works with the regular HID input driver. Only when some keys are released, another spurious key press event is interpreted due to incorrect array ranges. According to HID 1.11, section 6.2.2.5, arrays should return a 0 value when no control is asserted, and ranges should go from 1 to the number of elements. The patch clips the value with a logical range from 1..15 (instead of originally 0..18). Ticket with more information available at https://bugs.launchpad.net/bugs/326986 3. Descriptor size 135 bytes ("Gotview remote") This receiver has a similar issue than the previous one, i.e. it mostly works with regular HID input, except some key press events get stuck on key release. The patch clips the array value from 1..14 (instead of originally 0..17). Ticket with more information available at http://bugs.archlinux.org/task/15216 4. Other unknown variants (found one report with 218 bytes, but no further information about issues) For such unknown variants we should refrain from changing any device flags. Currently, HIDINPUT is suppressed and HIDDEV is enforced (because in 2.6.25 the quirk table did not yet allow differentiating variants and we did not expect variants either). Now we should be as strict as possible and enable it only for the first variant above. Signed-off-by: Robert Schedel <r.schedel@yahoo.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-23 13:26:48 +04:00
dev_info(&hdev->dev, "fixing up Samsung IrDA %d byte report "
"descriptor\n", 184);
rdesc[176] = 0xff;
rdesc[178] = 0x08;
rdesc[180] = 0x06;
rdesc[182] = 0x42;
HID: Support new variants of Samsung USB IR receiver (0419:0001) This patch extends the existing Samsung IrDA (0419:0001) quirk file with newly reported variants: * New device variants with 203 byte and 135 byte report descriptors were reported to be recognized incorrectly. This patch adds an autodetection for those two, using report descriptor size to enable new quirks. * Any other unknown 0419:0001 variants will now be treated without any quirk flags (i.e. IGNORE_HIDINPUT/HIDDEV_FORCE will not be set by default anymore). More details: 1. Descriptor size 184 bytes ("Satelco bundled remote") Already supported since kernel 2.6.25 (my old patch). 2. Descriptor size 203 bytes ("Optronix remote") This receiver mostly works with the regular HID input driver. Only when some keys are released, another spurious key press event is interpreted due to incorrect array ranges. According to HID 1.11, section 6.2.2.5, arrays should return a 0 value when no control is asserted, and ranges should go from 1 to the number of elements. The patch clips the value with a logical range from 1..15 (instead of originally 0..18). Ticket with more information available at https://bugs.launchpad.net/bugs/326986 3. Descriptor size 135 bytes ("Gotview remote") This receiver has a similar issue than the previous one, i.e. it mostly works with regular HID input, except some key press events get stuck on key release. The patch clips the array value from 1..14 (instead of originally 0..17). Ticket with more information available at http://bugs.archlinux.org/task/15216 4. Other unknown variants (found one report with 218 bytes, but no further information about issues) For such unknown variants we should refrain from changing any device flags. Currently, HIDINPUT is suppressed and HIDDEV is enforced (because in 2.6.25 the quirk table did not yet allow differentiating variants and we did not expect variants either). Now we should be as strict as possible and enable it only for the first variant above. Signed-off-by: Robert Schedel <r.schedel@yahoo.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-23 13:26:48 +04:00
} else
if (rsize == 203 && rdesc[192] == 0x15 && rdesc[193] == 0x0 &&
rdesc[194] == 0x25 && rdesc[195] == 0x12) {
dev_info(&hdev->dev, "fixing up Samsung IrDA %d byte report "
"descriptor\n", 203);
rdesc[193] = 0x1;
rdesc[195] = 0xf;
} else
if (rsize == 135 && rdesc[124] == 0x15 && rdesc[125] == 0x0 &&
rdesc[126] == 0x25 && rdesc[127] == 0x11) {
dev_info(&hdev->dev, "fixing up Samsung IrDA %d byte report "
"descriptor\n", 135);
rdesc[125] = 0x1;
rdesc[127] = 0xe;
}
}
static int samsung_probe(struct hid_device *hdev,
const struct hid_device_id *id)
{
int ret;
HID: Support new variants of Samsung USB IR receiver (0419:0001) This patch extends the existing Samsung IrDA (0419:0001) quirk file with newly reported variants: * New device variants with 203 byte and 135 byte report descriptors were reported to be recognized incorrectly. This patch adds an autodetection for those two, using report descriptor size to enable new quirks. * Any other unknown 0419:0001 variants will now be treated without any quirk flags (i.e. IGNORE_HIDINPUT/HIDDEV_FORCE will not be set by default anymore). More details: 1. Descriptor size 184 bytes ("Satelco bundled remote") Already supported since kernel 2.6.25 (my old patch). 2. Descriptor size 203 bytes ("Optronix remote") This receiver mostly works with the regular HID input driver. Only when some keys are released, another spurious key press event is interpreted due to incorrect array ranges. According to HID 1.11, section 6.2.2.5, arrays should return a 0 value when no control is asserted, and ranges should go from 1 to the number of elements. The patch clips the value with a logical range from 1..15 (instead of originally 0..18). Ticket with more information available at https://bugs.launchpad.net/bugs/326986 3. Descriptor size 135 bytes ("Gotview remote") This receiver has a similar issue than the previous one, i.e. it mostly works with regular HID input, except some key press events get stuck on key release. The patch clips the array value from 1..14 (instead of originally 0..17). Ticket with more information available at http://bugs.archlinux.org/task/15216 4. Other unknown variants (found one report with 218 bytes, but no further information about issues) For such unknown variants we should refrain from changing any device flags. Currently, HIDINPUT is suppressed and HIDDEV is enforced (because in 2.6.25 the quirk table did not yet allow differentiating variants and we did not expect variants either). Now we should be as strict as possible and enable it only for the first variant above. Signed-off-by: Robert Schedel <r.schedel@yahoo.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-23 13:26:48 +04:00
unsigned int cmask = HID_CONNECT_DEFAULT;
ret = hid_parse(hdev);
if (ret) {
dev_err(&hdev->dev, "parse failed\n");
goto err_free;
}
HID: Support new variants of Samsung USB IR receiver (0419:0001) This patch extends the existing Samsung IrDA (0419:0001) quirk file with newly reported variants: * New device variants with 203 byte and 135 byte report descriptors were reported to be recognized incorrectly. This patch adds an autodetection for those two, using report descriptor size to enable new quirks. * Any other unknown 0419:0001 variants will now be treated without any quirk flags (i.e. IGNORE_HIDINPUT/HIDDEV_FORCE will not be set by default anymore). More details: 1. Descriptor size 184 bytes ("Satelco bundled remote") Already supported since kernel 2.6.25 (my old patch). 2. Descriptor size 203 bytes ("Optronix remote") This receiver mostly works with the regular HID input driver. Only when some keys are released, another spurious key press event is interpreted due to incorrect array ranges. According to HID 1.11, section 6.2.2.5, arrays should return a 0 value when no control is asserted, and ranges should go from 1 to the number of elements. The patch clips the value with a logical range from 1..15 (instead of originally 0..18). Ticket with more information available at https://bugs.launchpad.net/bugs/326986 3. Descriptor size 135 bytes ("Gotview remote") This receiver has a similar issue than the previous one, i.e. it mostly works with regular HID input, except some key press events get stuck on key release. The patch clips the array value from 1..14 (instead of originally 0..17). Ticket with more information available at http://bugs.archlinux.org/task/15216 4. Other unknown variants (found one report with 218 bytes, but no further information about issues) For such unknown variants we should refrain from changing any device flags. Currently, HIDINPUT is suppressed and HIDDEV is enforced (because in 2.6.25 the quirk table did not yet allow differentiating variants and we did not expect variants either). Now we should be as strict as possible and enable it only for the first variant above. Signed-off-by: Robert Schedel <r.schedel@yahoo.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-23 13:26:48 +04:00
if (hdev->rsize == 184) {
/* disable hidinput, force hiddev */
cmask = (cmask & ~HID_CONNECT_HIDINPUT) |
HID_CONNECT_HIDDEV_FORCE;
}
ret = hid_hw_start(hdev, cmask);
if (ret) {
dev_err(&hdev->dev, "hw start failed\n");
goto err_free;
}
return 0;
err_free:
return ret;
}
static const struct hid_device_id samsung_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) },
{ }
};
MODULE_DEVICE_TABLE(hid, samsung_devices);
static struct hid_driver samsung_driver = {
.name = "samsung",
.id_table = samsung_devices,
.report_fixup = samsung_report_fixup,
.probe = samsung_probe,
};
static int __init samsung_init(void)
{
return hid_register_driver(&samsung_driver);
}
static void __exit samsung_exit(void)
{
hid_unregister_driver(&samsung_driver);
}
module_init(samsung_init);
module_exit(samsung_exit);
MODULE_LICENSE("GPL");