WSL2-Linux-Kernel/drivers/pwm/pwm-atmel.c

402 строки
9.7 KiB
C
Исходник Обычный вид История

/*
* Driver for Atmel Pulse Width Modulation Controller
*
* Copyright (C) 2013 Atmel Corporation
* Bo Shen <voice.shen@atmel.com>
*
* Licensed under GPLv2.
*/
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <linux/slab.h>
/* The following is global registers for PWM controller */
#define PWM_ENA 0x04
#define PWM_DIS 0x08
#define PWM_SR 0x0C
/* Bit field in SR */
#define PWM_SR_ALL_CH_ON 0x0F
/* The following register is PWM channel related registers */
#define PWM_CH_REG_OFFSET 0x200
#define PWM_CH_REG_SIZE 0x20
#define PWM_CMR 0x0
/* Bit field in CMR */
#define PWM_CMR_CPOL (1 << 9)
#define PWM_CMR_UPD_CDTY (1 << 10)
#define PWM_CMR_CPRE_MSK 0xF
/* The following registers for PWM v1 */
#define PWMV1_CDTY 0x04
#define PWMV1_CPRD 0x08
#define PWMV1_CUPD 0x10
/* The following registers for PWM v2 */
#define PWMV2_CDTY 0x04
#define PWMV2_CDTYUPD 0x08
#define PWMV2_CPRD 0x0C
#define PWMV2_CPRDUPD 0x10
/*
* Max value for duty and period
*
* Although the duty and period register is 32 bit,
* however only the LSB 16 bits are significant.
*/
#define PWM_MAX_DTY 0xFFFF
#define PWM_MAX_PRD 0xFFFF
#define PRD_MAX_PRES 10
struct atmel_pwm_chip {
struct pwm_chip chip;
struct clk *clk;
void __iomem *base;
void (*config)(struct pwm_chip *chip, struct pwm_device *pwm,
unsigned long dty, unsigned long prd);
};
static inline struct atmel_pwm_chip *to_atmel_pwm_chip(struct pwm_chip *chip)
{
return container_of(chip, struct atmel_pwm_chip, chip);
}
static inline u32 atmel_pwm_readl(struct atmel_pwm_chip *chip,
unsigned long offset)
{
return readl_relaxed(chip->base + offset);
}
static inline void atmel_pwm_writel(struct atmel_pwm_chip *chip,
unsigned long offset, unsigned long val)
{
writel_relaxed(val, chip->base + offset);
}
static inline u32 atmel_pwm_ch_readl(struct atmel_pwm_chip *chip,
unsigned int ch, unsigned long offset)
{
unsigned long base = PWM_CH_REG_OFFSET + ch * PWM_CH_REG_SIZE;
return readl_relaxed(chip->base + base + offset);
}
static inline void atmel_pwm_ch_writel(struct atmel_pwm_chip *chip,
unsigned int ch, unsigned long offset,
unsigned long val)
{
unsigned long base = PWM_CH_REG_OFFSET + ch * PWM_CH_REG_SIZE;
writel_relaxed(val, chip->base + base + offset);
}
static int atmel_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
int duty_ns, int period_ns)
{
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
unsigned long clk_rate, prd, dty;
unsigned long long div;
unsigned int pres = 0;
u32 val;
int ret;
if (test_bit(PWMF_ENABLED, &pwm->flags) && (period_ns != pwm->period)) {
dev_err(chip->dev, "cannot change PWM period while enabled\n");
return -EBUSY;
}
clk_rate = clk_get_rate(atmel_pwm->clk);
div = clk_rate;
/* Calculate the period cycles */
while (div > PWM_MAX_PRD) {
div = clk_rate / (1 << pres);
div = div * period_ns;
/* 1/Hz = 100000000 ns */
do_div(div, 1000000000);
if (pres++ > PRD_MAX_PRES) {
dev_err(chip->dev, "pres exceeds the maximum value\n");
return -EINVAL;
}
}
/* Calculate the duty cycles */
prd = div;
div *= duty_ns;
do_div(div, period_ns);
dty = prd - div;
ret = clk_enable(atmel_pwm->clk);
if (ret) {
dev_err(chip->dev, "failed to enable PWM clock\n");
return ret;
}
/* It is necessary to preserve CPOL, inside CMR */
val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
val = (val & ~PWM_CMR_CPRE_MSK) | (pres & PWM_CMR_CPRE_MSK);
atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val);
atmel_pwm->config(chip, pwm, dty, prd);
clk_disable(atmel_pwm->clk);
return ret;
}
static void atmel_pwm_config_v1(struct pwm_chip *chip, struct pwm_device *pwm,
unsigned long dty, unsigned long prd)
{
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
unsigned int val;
if (test_bit(PWMF_ENABLED, &pwm->flags)) {
/*
* If the PWM channel is enabled, using the update register,
* it needs to set bit 10 of CMR to 0
*/
atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV1_CUPD, dty);
val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
val &= ~PWM_CMR_UPD_CDTY;
atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val);
} else {
/*
* If the PWM channel is disabled, write value to duty and
* period registers directly.
*/
atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV1_CDTY, dty);
atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV1_CPRD, prd);
}
}
static void atmel_pwm_config_v2(struct pwm_chip *chip, struct pwm_device *pwm,
unsigned long dty, unsigned long prd)
{
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
if (test_bit(PWMF_ENABLED, &pwm->flags)) {
/*
* If the PWM channel is enabled, using the duty update register
* to update the value.
*/
atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV2_CDTYUPD, dty);
} else {
/*
* If the PWM channel is disabled, write value to duty and
* period registers directly.
*/
atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV2_CDTY, dty);
atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV2_CPRD, prd);
}
}
static int atmel_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
enum pwm_polarity polarity)
{
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
u32 val;
int ret;
val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
if (polarity == PWM_POLARITY_NORMAL)
val &= ~PWM_CMR_CPOL;
else
val |= PWM_CMR_CPOL;
ret = clk_enable(atmel_pwm->clk);
if (ret) {
dev_err(chip->dev, "failed to enable PWM clock\n");
return ret;
}
atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val);
clk_disable(atmel_pwm->clk);
return 0;
}
static int atmel_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
int ret;
ret = clk_enable(atmel_pwm->clk);
if (ret) {
dev_err(chip->dev, "failed to enable PWM clock\n");
return ret;
}
atmel_pwm_writel(atmel_pwm, PWM_ENA, 1 << pwm->hwpwm);
return 0;
}
static void atmel_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
atmel_pwm_writel(atmel_pwm, PWM_DIS, 1 << pwm->hwpwm);
clk_disable(atmel_pwm->clk);
}
static const struct pwm_ops atmel_pwm_ops = {
.config = atmel_pwm_config,
.set_polarity = atmel_pwm_set_polarity,
.enable = atmel_pwm_enable,
.disable = atmel_pwm_disable,
.owner = THIS_MODULE,
};
struct atmel_pwm_data {
void (*config)(struct pwm_chip *chip, struct pwm_device *pwm,
unsigned long dty, unsigned long prd);
};
static const struct atmel_pwm_data atmel_pwm_data_v1 = {
.config = atmel_pwm_config_v1,
};
static const struct atmel_pwm_data atmel_pwm_data_v2 = {
.config = atmel_pwm_config_v2,
};
static const struct platform_device_id atmel_pwm_devtypes[] = {
{
.name = "at91sam9rl-pwm",
.driver_data = (kernel_ulong_t)&atmel_pwm_data_v1,
}, {
.name = "sama5d3-pwm",
.driver_data = (kernel_ulong_t)&atmel_pwm_data_v2,
}, {
/* sentinel */
},
};
MODULE_DEVICE_TABLE(platform, atmel_pwm_devtypes);
static const struct of_device_id atmel_pwm_dt_ids[] = {
{
.compatible = "atmel,at91sam9rl-pwm",
.data = &atmel_pwm_data_v1,
}, {
.compatible = "atmel,sama5d3-pwm",
.data = &atmel_pwm_data_v2,
}, {
/* sentinel */
},
};
MODULE_DEVICE_TABLE(of, atmel_pwm_dt_ids);
static inline const struct atmel_pwm_data *
atmel_pwm_get_driver_data(struct platform_device *pdev)
{
if (pdev->dev.of_node) {
const struct of_device_id *match;
match = of_match_device(atmel_pwm_dt_ids, &pdev->dev);
if (!match)
return NULL;
return match->data;
} else {
const struct platform_device_id *id;
id = platform_get_device_id(pdev);
return (struct atmel_pwm_data *)id->driver_data;
}
}
static int atmel_pwm_probe(struct platform_device *pdev)
{
const struct atmel_pwm_data *data;
struct atmel_pwm_chip *atmel_pwm;
struct resource *res;
int ret;
data = atmel_pwm_get_driver_data(pdev);
if (!data)
return -ENODEV;
atmel_pwm = devm_kzalloc(&pdev->dev, sizeof(*atmel_pwm), GFP_KERNEL);
if (!atmel_pwm)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
atmel_pwm->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(atmel_pwm->base))
return PTR_ERR(atmel_pwm->base);
atmel_pwm->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(atmel_pwm->clk))
return PTR_ERR(atmel_pwm->clk);
ret = clk_prepare(atmel_pwm->clk);
if (ret) {
dev_err(&pdev->dev, "failed to prepare PWM clock\n");
return ret;
}
atmel_pwm->chip.dev = &pdev->dev;
atmel_pwm->chip.ops = &atmel_pwm_ops;
if (pdev->dev.of_node) {
atmel_pwm->chip.of_xlate = of_pwm_xlate_with_flags;
atmel_pwm->chip.of_pwm_n_cells = 3;
}
atmel_pwm->chip.base = -1;
atmel_pwm->chip.npwm = 4;
atmel_pwm->chip.can_sleep = true;
atmel_pwm->config = data->config;
ret = pwmchip_add(&atmel_pwm->chip);
if (ret < 0) {
dev_err(&pdev->dev, "failed to add PWM chip %d\n", ret);
goto unprepare_clk;
}
platform_set_drvdata(pdev, atmel_pwm);
return ret;
unprepare_clk:
clk_unprepare(atmel_pwm->clk);
return ret;
}
static int atmel_pwm_remove(struct platform_device *pdev)
{
struct atmel_pwm_chip *atmel_pwm = platform_get_drvdata(pdev);
clk_unprepare(atmel_pwm->clk);
return pwmchip_remove(&atmel_pwm->chip);
}
static struct platform_driver atmel_pwm_driver = {
.driver = {
.name = "atmel-pwm",
.of_match_table = of_match_ptr(atmel_pwm_dt_ids),
},
.id_table = atmel_pwm_devtypes,
.probe = atmel_pwm_probe,
.remove = atmel_pwm_remove,
};
module_platform_driver(atmel_pwm_driver);
MODULE_ALIAS("platform:atmel-pwm");
MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>");
MODULE_DESCRIPTION("Atmel PWM driver");
MODULE_LICENSE("GPL v2");