microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/nfc/st21nfca/se.c

427 строки
11 KiB
C
Исходник Обычный вид История

NFC: st21nfca: Adding support for secure element st21nfca has 1 physical SWP line and can support up to 2 secure elements (UICC & eSE) thanks to an external switch managed with a gpio. The platform integrator needs to specify thanks to 2 initialization properties, uicc-present and ese-present, if it is suppose to have uicc and/or ese. Of course if the platform does not have an external switch, only one kind of secure element can be supported. Those parameters are under platform integrator responsibilities. During initialization, the white_list will be set according to those parameters. The discovery_se function will assume a secure element is physically present according to uicc-present and ese-present values and will add it to the secure element list. On ese activation, the atr is retrieved to calculate a command exchange timeout based on the first atr(TB) value. The se_io will allow to transfer data over SWP. 2 kind of events may appear after a data is sent over: - ST21NFCA_EVT_TRANSMIT_DATA when receiving an apdu answer - ST21NFCA_EVT_WTX_REQUEST when the secure element needs more time than expected to compute a command. If this timeout expired, a first recovery tentative consist to send a simple software reset proprietary command. If this tentative still fail, a second recovery tentative consist to send a hardware reset proprietary command. This function is only relevant for eSE like secure element. This patch also change the way a pipe is referenced. There can be different pipe connected to the same gate with different host destination (ex: CONNECTIVITY). In order to keep host information every pipe are reference with a tuple (gate, host). In order to reduce changes, we are keeping unchanged the way a gate is addressed on the Terminal Host. However, this is working because we consider the apdu reader gate is only present on the eSE slot also the connectivity gate cannot give a reliable value; it will give the latest stored pipe value. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-27 03:18:19 +03:00
/*
* Copyright (C) 2014 STMicroelectronics SAS. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include <net/nfc/hci.h>
#include "st21nfca.h"
#define ST21NFCA_EVT_UICC_ACTIVATE 0x10
NFC: st21nfca: Add few code style fixes Add a minor code style fixes Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26 00:54:45 +03:00
#define ST21NFCA_EVT_UICC_DEACTIVATE 0x13
NFC: st21nfca: Adding support for secure element st21nfca has 1 physical SWP line and can support up to 2 secure elements (UICC & eSE) thanks to an external switch managed with a gpio. The platform integrator needs to specify thanks to 2 initialization properties, uicc-present and ese-present, if it is suppose to have uicc and/or ese. Of course if the platform does not have an external switch, only one kind of secure element can be supported. Those parameters are under platform integrator responsibilities. During initialization, the white_list will be set according to those parameters. The discovery_se function will assume a secure element is physically present according to uicc-present and ese-present values and will add it to the secure element list. On ese activation, the atr is retrieved to calculate a command exchange timeout based on the first atr(TB) value. The se_io will allow to transfer data over SWP. 2 kind of events may appear after a data is sent over: - ST21NFCA_EVT_TRANSMIT_DATA when receiving an apdu answer - ST21NFCA_EVT_WTX_REQUEST when the secure element needs more time than expected to compute a command. If this timeout expired, a first recovery tentative consist to send a simple software reset proprietary command. If this tentative still fail, a second recovery tentative consist to send a hardware reset proprietary command. This function is only relevant for eSE like secure element. This patch also change the way a pipe is referenced. There can be different pipe connected to the same gate with different host destination (ex: CONNECTIVITY). In order to keep host information every pipe are reference with a tuple (gate, host). In order to reduce changes, we are keeping unchanged the way a gate is addressed on the Terminal Host. However, this is working because we consider the apdu reader gate is only present on the eSE slot also the connectivity gate cannot give a reliable value; it will give the latest stored pipe value. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-27 03:18:19 +03:00
#define ST21NFCA_EVT_SE_HARD_RESET 0x20
#define ST21NFCA_EVT_SE_SOFT_RESET 0x11
#define ST21NFCA_EVT_SE_END_OF_APDU_TRANSFER 0x21
#define ST21NFCA_EVT_SE_ACTIVATE 0x22
#define ST21NFCA_EVT_SE_DEACTIVATE 0x23
#define ST21NFCA_EVT_TRANSMIT_DATA 0x10
#define ST21NFCA_EVT_WTX_REQUEST 0x11
#define ST21NFCA_EVT_CONNECTIVITY 0x10
#define ST21NFCA_EVT_TRANSACTION 0x12
#define ST21NFCA_SE_TO_HOT_PLUG 1000
/* Connectivity pipe only */
#define ST21NFCA_SE_COUNT_PIPE_UICC 0x01
/* Connectivity + APDU Reader pipe */
#define ST21NFCA_SE_COUNT_PIPE_EMBEDDED 0x02
#define ST21NFCA_SE_MODE_OFF 0x00
#define ST21NFCA_SE_MODE_ON 0x01
#define ST21NFCA_PARAM_ATR 0x01
#define ST21NFCA_ATR_DEFAULT_BWI 0x04
/*
* WT = 2^BWI/10[s], convert into msecs and add a secure
* room by increasing by 2 this timeout
*/
#define ST21NFCA_BWI_TO_TIMEOUT(x) ((1 << x) * 200)
#define ST21NFCA_ATR_GET_Y_FROM_TD(x) (x >> 4)
/* If TA is present bit 0 is set */
#define ST21NFCA_ATR_TA_PRESENT(x) (x & 0x01)
/* If TB is present bit 1 is set */
#define ST21NFCA_ATR_TB_PRESENT(x) (x & 0x02)
static u8 st21nfca_se_get_bwi(struct nfc_hci_dev *hdev)
{
int i;
u8 td;
struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
/* Bits 8 to 5 of the first TB for T=1 encode BWI from zero to nine */
for (i = 1; i < ST21NFCA_ESE_MAX_LENGTH; i++) {
td = ST21NFCA_ATR_GET_Y_FROM_TD(info->se_info.atr[i]);
if (ST21NFCA_ATR_TA_PRESENT(td))
i++;
if (ST21NFCA_ATR_TB_PRESENT(td)) {
i++;
return info->se_info.atr[i] >> 4;
}
}
return ST21NFCA_ATR_DEFAULT_BWI;
}
static void st21nfca_se_get_atr(struct nfc_hci_dev *hdev)
{
int r;
struct sk_buff *skb;
struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
r = nfc_hci_get_param(hdev, ST21NFCA_APDU_READER_GATE,
ST21NFCA_PARAM_ATR, &skb);
if (r < 0)
return;
if (skb->len <= ST21NFCA_ESE_MAX_LENGTH) {
memcpy(info->se_info.atr, skb->data, skb->len);
info->se_info.wt_timeout =
ST21NFCA_BWI_TO_TIMEOUT(st21nfca_se_get_bwi(hdev));
}
kfree_skb(skb);
}
static int st21nfca_hci_control_se(struct nfc_hci_dev *hdev, u32 se_idx,
u8 state)
{
struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
NFC: st21nfca: Fix host_list verification after SEactivation A secure element can be activated in different order. The host_list is updated keeping a fixed order: <terminal_host_id><uicc_id><ese_id>. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26 00:54:42 +03:00
int r, i;
NFC: st21nfca: Adding support for secure element st21nfca has 1 physical SWP line and can support up to 2 secure elements (UICC & eSE) thanks to an external switch managed with a gpio. The platform integrator needs to specify thanks to 2 initialization properties, uicc-present and ese-present, if it is suppose to have uicc and/or ese. Of course if the platform does not have an external switch, only one kind of secure element can be supported. Those parameters are under platform integrator responsibilities. During initialization, the white_list will be set according to those parameters. The discovery_se function will assume a secure element is physically present according to uicc-present and ese-present values and will add it to the secure element list. On ese activation, the atr is retrieved to calculate a command exchange timeout based on the first atr(TB) value. The se_io will allow to transfer data over SWP. 2 kind of events may appear after a data is sent over: - ST21NFCA_EVT_TRANSMIT_DATA when receiving an apdu answer - ST21NFCA_EVT_WTX_REQUEST when the secure element needs more time than expected to compute a command. If this timeout expired, a first recovery tentative consist to send a simple software reset proprietary command. If this tentative still fail, a second recovery tentative consist to send a hardware reset proprietary command. This function is only relevant for eSE like secure element. This patch also change the way a pipe is referenced. There can be different pipe connected to the same gate with different host destination (ex: CONNECTIVITY). In order to keep host information every pipe are reference with a tuple (gate, host). In order to reduce changes, we are keeping unchanged the way a gate is addressed on the Terminal Host. However, this is working because we consider the apdu reader gate is only present on the eSE slot also the connectivity gate cannot give a reliable value; it will give the latest stored pipe value. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-27 03:18:19 +03:00
struct sk_buff *sk_host_list;
u8 se_event, host_id;
switch (se_idx) {
case NFC_HCI_UICC_HOST_ID:
se_event = (state == ST21NFCA_SE_MODE_ON ?
ST21NFCA_EVT_UICC_ACTIVATE :
ST21NFCA_EVT_UICC_DEACTIVATE);
info->se_info.count_pipes = 0;
info->se_info.expected_pipes = ST21NFCA_SE_COUNT_PIPE_UICC;
break;
case ST21NFCA_ESE_HOST_ID:
se_event = (state == ST21NFCA_SE_MODE_ON ?
ST21NFCA_EVT_SE_ACTIVATE :
ST21NFCA_EVT_SE_DEACTIVATE);
info->se_info.count_pipes = 0;
info->se_info.expected_pipes = ST21NFCA_SE_COUNT_PIPE_EMBEDDED;
break;
default:
return -EINVAL;
}
/*
* Wait for an EVT_HOT_PLUG in order to
* retrieve a relevant host list.
*/
reinit_completion(&info->se_info.req_completion);
r = nfc_hci_send_event(hdev, ST21NFCA_DEVICE_MGNT_GATE, se_event,
NULL, 0);
if (r < 0)
return r;
mod_timer(&info->se_info.se_active_timer, jiffies +
msecs_to_jiffies(ST21NFCA_SE_TO_HOT_PLUG));
info->se_info.se_active = true;
/* Ignore return value and check in any case the host_list */
wait_for_completion_interruptible(&info->se_info.req_completion);
r = nfc_hci_get_param(hdev, NFC_HCI_ADMIN_GATE,
NFC_HCI_ADMIN_HOST_LIST,
&sk_host_list);
if (r < 0)
return r;
NFC: st21nfca: Fix host_list verification after SEactivation A secure element can be activated in different order. The host_list is updated keeping a fixed order: <terminal_host_id><uicc_id><ese_id>. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26 00:54:42 +03:00
for (i = 0; i < sk_host_list->len &&
sk_host_list->data[i] != se_idx; i++)
;
host_id = sk_host_list->data[i];
NFC: st21nfca: Adding support for secure element st21nfca has 1 physical SWP line and can support up to 2 secure elements (UICC & eSE) thanks to an external switch managed with a gpio. The platform integrator needs to specify thanks to 2 initialization properties, uicc-present and ese-present, if it is suppose to have uicc and/or ese. Of course if the platform does not have an external switch, only one kind of secure element can be supported. Those parameters are under platform integrator responsibilities. During initialization, the white_list will be set according to those parameters. The discovery_se function will assume a secure element is physically present according to uicc-present and ese-present values and will add it to the secure element list. On ese activation, the atr is retrieved to calculate a command exchange timeout based on the first atr(TB) value. The se_io will allow to transfer data over SWP. 2 kind of events may appear after a data is sent over: - ST21NFCA_EVT_TRANSMIT_DATA when receiving an apdu answer - ST21NFCA_EVT_WTX_REQUEST when the secure element needs more time than expected to compute a command. If this timeout expired, a first recovery tentative consist to send a simple software reset proprietary command. If this tentative still fail, a second recovery tentative consist to send a hardware reset proprietary command. This function is only relevant for eSE like secure element. This patch also change the way a pipe is referenced. There can be different pipe connected to the same gate with different host destination (ex: CONNECTIVITY). In order to keep host information every pipe are reference with a tuple (gate, host). In order to reduce changes, we are keeping unchanged the way a gate is addressed on the Terminal Host. However, this is working because we consider the apdu reader gate is only present on the eSE slot also the connectivity gate cannot give a reliable value; it will give the latest stored pipe value. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-27 03:18:19 +03:00
kfree_skb(sk_host_list);
if (state == ST21NFCA_SE_MODE_ON && host_id == se_idx)
return se_idx;
else if (state == ST21NFCA_SE_MODE_OFF && host_id != se_idx)
return se_idx;
return -1;
}
int st21nfca_hci_discover_se(struct nfc_hci_dev *hdev)
{
struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
int se_count = 0;
NFC: st21nfca: Add support for proprietary commands Add support for proprietary commands useful mainly for factory testings. Here is a list: - FACTORY_MODE: Allow to set the driver into a mode where no secure element are activated. It does not consider any NFC_ATTR_VENDOR_DATA. - HCI_CLEAR_ALL_PIPES: Allow to execute a HCI clear all pipes command. It does not consider any NFC_ATTR_VENDOR_DATA. - HCI_DM_PUT_DATA: Allow to configure specific CLF registry as for example RF trimmings or low level drivers configurations (I2C, SPI, SWP). - HCI_DM_UPDATE_AID: Allow to configure an AID routing into the CLF routing table following RF technology, CLF mode or protocol. - HCI_DM_GET_INFO: Allow to retrieve CLF information. - HCI_DM_GET_DATA: Allow to retrieve CLF configurable data such as low level drivers configurations or RF trimmings. - HCI_DM_LOAD: Allow to load a firmware into the CLF. A complete packet can be more than 8KB. - HCI_DM_RESET: Allow to run a CLF reset in order to "commit" CLF configuration changes without CLF power off. - HCI_GET_PARAM: Allow to retrieve an HCI CLF parameter (for example the white list). - HCI_DM_FIELD_GENERATOR: Allow to generate different kind of RF technology. When using this command to anti-collision is done. - HCI_LOOPBACK: Allow to echo a command and test the Dh to CLF connectivity. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26 09:50:11 +03:00
if (test_bit(ST21NFCA_FACTORY_MODE, &hdev->quirks))
return 0;
NFC: st21nfca: Adding support for secure element st21nfca has 1 physical SWP line and can support up to 2 secure elements (UICC & eSE) thanks to an external switch managed with a gpio. The platform integrator needs to specify thanks to 2 initialization properties, uicc-present and ese-present, if it is suppose to have uicc and/or ese. Of course if the platform does not have an external switch, only one kind of secure element can be supported. Those parameters are under platform integrator responsibilities. During initialization, the white_list will be set according to those parameters. The discovery_se function will assume a secure element is physically present according to uicc-present and ese-present values and will add it to the secure element list. On ese activation, the atr is retrieved to calculate a command exchange timeout based on the first atr(TB) value. The se_io will allow to transfer data over SWP. 2 kind of events may appear after a data is sent over: - ST21NFCA_EVT_TRANSMIT_DATA when receiving an apdu answer - ST21NFCA_EVT_WTX_REQUEST when the secure element needs more time than expected to compute a command. If this timeout expired, a first recovery tentative consist to send a simple software reset proprietary command. If this tentative still fail, a second recovery tentative consist to send a hardware reset proprietary command. This function is only relevant for eSE like secure element. This patch also change the way a pipe is referenced. There can be different pipe connected to the same gate with different host destination (ex: CONNECTIVITY). In order to keep host information every pipe are reference with a tuple (gate, host). In order to reduce changes, we are keeping unchanged the way a gate is addressed on the Terminal Host. However, this is working because we consider the apdu reader gate is only present on the eSE slot also the connectivity gate cannot give a reliable value; it will give the latest stored pipe value. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-27 03:18:19 +03:00
if (info->se_status->is_uicc_present) {
nfc_add_se(hdev->ndev, NFC_HCI_UICC_HOST_ID, NFC_SE_UICC);
se_count++;
}
if (info->se_status->is_ese_present) {
nfc_add_se(hdev->ndev, ST21NFCA_ESE_HOST_ID, NFC_SE_EMBEDDED);
se_count++;
}
return !se_count;
}
EXPORT_SYMBOL(st21nfca_hci_discover_se);
int st21nfca_hci_enable_se(struct nfc_hci_dev *hdev, u32 se_idx)
{
int r;
/*
* According to upper layer, se_idx == NFC_SE_UICC when
* info->se_status->is_uicc_enable is true should never happen.
* Same for eSE.
*/
r = st21nfca_hci_control_se(hdev, se_idx, ST21NFCA_SE_MODE_ON);
if (r == ST21NFCA_ESE_HOST_ID) {
st21nfca_se_get_atr(hdev);
r = nfc_hci_send_event(hdev, ST21NFCA_APDU_READER_GATE,
ST21NFCA_EVT_SE_SOFT_RESET, NULL, 0);
if (r < 0)
return r;
} else if (r < 0) {
/*
* The activation tentative failed, the secure element
* is not connected. Remove from the list.
*/
nfc_remove_se(hdev->ndev, se_idx);
return r;
}
return 0;
}
EXPORT_SYMBOL(st21nfca_hci_enable_se);
int st21nfca_hci_disable_se(struct nfc_hci_dev *hdev, u32 se_idx)
{
int r;
/*
* According to upper layer, se_idx == NFC_SE_UICC when
* info->se_status->is_uicc_enable is true should never happen
* Same for eSE.
*/
r = st21nfca_hci_control_se(hdev, se_idx, ST21NFCA_SE_MODE_OFF);
if (r < 0)
return r;
return 0;
}
EXPORT_SYMBOL(st21nfca_hci_disable_se);
int st21nfca_hci_se_io(struct nfc_hci_dev *hdev, u32 se_idx,
u8 *apdu, size_t apdu_length,
se_io_cb_t cb, void *cb_context)
{
struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
pr_debug("se_io %x\n", se_idx);
switch (se_idx) {
case ST21NFCA_ESE_HOST_ID:
info->se_info.cb = cb;
info->se_info.cb_context = cb_context;
mod_timer(&info->se_info.bwi_timer, jiffies +
msecs_to_jiffies(info->se_info.wt_timeout));
info->se_info.bwi_active = true;
return nfc_hci_send_event(hdev, ST21NFCA_APDU_READER_GATE,
ST21NFCA_EVT_TRANSMIT_DATA,
apdu, apdu_length);
default:
return -ENODEV;
}
}
EXPORT_SYMBOL(st21nfca_hci_se_io);
treewide: setup_timer() -> timer_setup() (2 field) This converts all remaining setup_timer() calls that use a nested field to reach a struct timer_list. Coccinelle does not have an easy way to match multiple fields, so a new script is needed to change the matches of "&_E->_timer" into "&_E->_field1._timer" in all the rules. spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup-2fields.cocci @fix_address_of depends@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _field1; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_field1._timer, NULL, _E); +timer_setup(&_E->_field1._timer, NULL, 0); | -setup_timer(&_E->_field1._timer, NULL, (_cast_data)_E); +timer_setup(&_E->_field1._timer, NULL, 0); | -setup_timer(&_E._field1._timer, NULL, &_E); +timer_setup(&_E._field1._timer, NULL, 0); | -setup_timer(&_E._field1._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._field1._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _field1; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_field1._timer, _callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, &_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | _E->_field1._timer@_stl.function = _callback; | _E->_field1._timer@_stl.function = &_callback; | _E->_field1._timer@_stl.function = (_cast_func)_callback; | _E->_field1._timer@_stl.function = (_cast_func)&_callback; | _E._field1._timer@_stl.function = _callback; | _E._field1._timer@_stl.function = &_callback; | _E._field1._timer@_stl.function = (_cast_func)_callback; | _E._field1._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _field1._timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _field1._timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _field1._timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_field1._timer, _callback, 0); +setup_timer(&_E->_field1._timer, _callback, (_cast_data)_E); | -timer_setup(&_E._field1._timer, _callback, 0); +setup_timer(&_E._field1._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_field1._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_field1._timer | -(_cast_data)&_E +&_E._field1._timer | -_E +&_E->_field1._timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _field1; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_field1._timer, _callback, 0); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, 0L); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, 0UL); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0L); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0UL); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0L); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0UL); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0); +timer_setup(_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0L); +timer_setup(_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0UL); +timer_setup(_field1._timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-10-18 06:21:24 +03:00
static void st21nfca_se_wt_timeout(struct timer_list *t)
NFC: st21nfca: Adding support for secure element st21nfca has 1 physical SWP line and can support up to 2 secure elements (UICC & eSE) thanks to an external switch managed with a gpio. The platform integrator needs to specify thanks to 2 initialization properties, uicc-present and ese-present, if it is suppose to have uicc and/or ese. Of course if the platform does not have an external switch, only one kind of secure element can be supported. Those parameters are under platform integrator responsibilities. During initialization, the white_list will be set according to those parameters. The discovery_se function will assume a secure element is physically present according to uicc-present and ese-present values and will add it to the secure element list. On ese activation, the atr is retrieved to calculate a command exchange timeout based on the first atr(TB) value. The se_io will allow to transfer data over SWP. 2 kind of events may appear after a data is sent over: - ST21NFCA_EVT_TRANSMIT_DATA when receiving an apdu answer - ST21NFCA_EVT_WTX_REQUEST when the secure element needs more time than expected to compute a command. If this timeout expired, a first recovery tentative consist to send a simple software reset proprietary command. If this tentative still fail, a second recovery tentative consist to send a hardware reset proprietary command. This function is only relevant for eSE like secure element. This patch also change the way a pipe is referenced. There can be different pipe connected to the same gate with different host destination (ex: CONNECTIVITY). In order to keep host information every pipe are reference with a tuple (gate, host). In order to reduce changes, we are keeping unchanged the way a gate is addressed on the Terminal Host. However, this is working because we consider the apdu reader gate is only present on the eSE slot also the connectivity gate cannot give a reliable value; it will give the latest stored pipe value. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-27 03:18:19 +03:00
{
/*
* No answer from the secure element
* within the defined timeout.
* Let's send a reset request as recovery procedure.
* According to the situation, we first try to send a software reset
* to the secure element. If the next command is still not
* answering in time, we send to the CLF a secure element hardware
* reset request.
*/
/* hardware reset managed through VCC_UICC_OUT power supply */
u8 param = 0x01;
treewide: setup_timer() -> timer_setup() (2 field) This converts all remaining setup_timer() calls that use a nested field to reach a struct timer_list. Coccinelle does not have an easy way to match multiple fields, so a new script is needed to change the matches of "&_E->_timer" into "&_E->_field1._timer" in all the rules. spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup-2fields.cocci @fix_address_of depends@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _field1; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_field1._timer, NULL, _E); +timer_setup(&_E->_field1._timer, NULL, 0); | -setup_timer(&_E->_field1._timer, NULL, (_cast_data)_E); +timer_setup(&_E->_field1._timer, NULL, 0); | -setup_timer(&_E._field1._timer, NULL, &_E); +timer_setup(&_E._field1._timer, NULL, 0); | -setup_timer(&_E._field1._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._field1._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _field1; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_field1._timer, _callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, &_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | _E->_field1._timer@_stl.function = _callback; | _E->_field1._timer@_stl.function = &_callback; | _E->_field1._timer@_stl.function = (_cast_func)_callback; | _E->_field1._timer@_stl.function = (_cast_func)&_callback; | _E._field1._timer@_stl.function = _callback; | _E._field1._timer@_stl.function = &_callback; | _E._field1._timer@_stl.function = (_cast_func)_callback; | _E._field1._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _field1._timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _field1._timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _field1._timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_field1._timer, _callback, 0); +setup_timer(&_E->_field1._timer, _callback, (_cast_data)_E); | -timer_setup(&_E._field1._timer, _callback, 0); +setup_timer(&_E._field1._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_field1._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_field1._timer | -(_cast_data)&_E +&_E._field1._timer | -_E +&_E->_field1._timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _field1; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_field1._timer, _callback, 0); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, 0L); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, 0UL); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0L); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0UL); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0L); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0UL); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0); +timer_setup(_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0L); +timer_setup(_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0UL); +timer_setup(_field1._timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-10-18 06:21:24 +03:00
struct st21nfca_hci_info *info = from_timer(info, t,
se_info.bwi_timer);
NFC: st21nfca: Adding support for secure element st21nfca has 1 physical SWP line and can support up to 2 secure elements (UICC & eSE) thanks to an external switch managed with a gpio. The platform integrator needs to specify thanks to 2 initialization properties, uicc-present and ese-present, if it is suppose to have uicc and/or ese. Of course if the platform does not have an external switch, only one kind of secure element can be supported. Those parameters are under platform integrator responsibilities. During initialization, the white_list will be set according to those parameters. The discovery_se function will assume a secure element is physically present according to uicc-present and ese-present values and will add it to the secure element list. On ese activation, the atr is retrieved to calculate a command exchange timeout based on the first atr(TB) value. The se_io will allow to transfer data over SWP. 2 kind of events may appear after a data is sent over: - ST21NFCA_EVT_TRANSMIT_DATA when receiving an apdu answer - ST21NFCA_EVT_WTX_REQUEST when the secure element needs more time than expected to compute a command. If this timeout expired, a first recovery tentative consist to send a simple software reset proprietary command. If this tentative still fail, a second recovery tentative consist to send a hardware reset proprietary command. This function is only relevant for eSE like secure element. This patch also change the way a pipe is referenced. There can be different pipe connected to the same gate with different host destination (ex: CONNECTIVITY). In order to keep host information every pipe are reference with a tuple (gate, host). In order to reduce changes, we are keeping unchanged the way a gate is addressed on the Terminal Host. However, this is working because we consider the apdu reader gate is only present on the eSE slot also the connectivity gate cannot give a reliable value; it will give the latest stored pipe value. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-27 03:18:19 +03:00
pr_debug("\n");
info->se_info.bwi_active = false;
if (!info->se_info.xch_error) {
info->se_info.xch_error = true;
nfc_hci_send_event(info->hdev, ST21NFCA_APDU_READER_GATE,
ST21NFCA_EVT_SE_SOFT_RESET, NULL, 0);
} else {
info->se_info.xch_error = false;
nfc_hci_send_event(info->hdev, ST21NFCA_DEVICE_MGNT_GATE,
ST21NFCA_EVT_SE_HARD_RESET, &param, 1);
}
info->se_info.cb(info->se_info.cb_context, NULL, 0, -ETIME);
}
treewide: setup_timer() -> timer_setup() (2 field) This converts all remaining setup_timer() calls that use a nested field to reach a struct timer_list. Coccinelle does not have an easy way to match multiple fields, so a new script is needed to change the matches of "&_E->_timer" into "&_E->_field1._timer" in all the rules. spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup-2fields.cocci @fix_address_of depends@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _field1; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_field1._timer, NULL, _E); +timer_setup(&_E->_field1._timer, NULL, 0); | -setup_timer(&_E->_field1._timer, NULL, (_cast_data)_E); +timer_setup(&_E->_field1._timer, NULL, 0); | -setup_timer(&_E._field1._timer, NULL, &_E); +timer_setup(&_E._field1._timer, NULL, 0); | -setup_timer(&_E._field1._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._field1._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _field1; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_field1._timer, _callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, &_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | _E->_field1._timer@_stl.function = _callback; | _E->_field1._timer@_stl.function = &_callback; | _E->_field1._timer@_stl.function = (_cast_func)_callback; | _E->_field1._timer@_stl.function = (_cast_func)&_callback; | _E._field1._timer@_stl.function = _callback; | _E._field1._timer@_stl.function = &_callback; | _E._field1._timer@_stl.function = (_cast_func)_callback; | _E._field1._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _field1._timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _field1._timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _field1._timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_field1._timer, _callback, 0); +setup_timer(&_E->_field1._timer, _callback, (_cast_data)_E); | -timer_setup(&_E._field1._timer, _callback, 0); +setup_timer(&_E._field1._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_field1._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_field1._timer | -(_cast_data)&_E +&_E._field1._timer | -_E +&_E->_field1._timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _field1; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_field1._timer, _callback, 0); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, 0L); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, 0UL); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0L); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0UL); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0L); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0UL); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0); +timer_setup(_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0L); +timer_setup(_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0UL); +timer_setup(_field1._timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-10-18 06:21:24 +03:00
static void st21nfca_se_activation_timeout(struct timer_list *t)
NFC: st21nfca: Adding support for secure element st21nfca has 1 physical SWP line and can support up to 2 secure elements (UICC & eSE) thanks to an external switch managed with a gpio. The platform integrator needs to specify thanks to 2 initialization properties, uicc-present and ese-present, if it is suppose to have uicc and/or ese. Of course if the platform does not have an external switch, only one kind of secure element can be supported. Those parameters are under platform integrator responsibilities. During initialization, the white_list will be set according to those parameters. The discovery_se function will assume a secure element is physically present according to uicc-present and ese-present values and will add it to the secure element list. On ese activation, the atr is retrieved to calculate a command exchange timeout based on the first atr(TB) value. The se_io will allow to transfer data over SWP. 2 kind of events may appear after a data is sent over: - ST21NFCA_EVT_TRANSMIT_DATA when receiving an apdu answer - ST21NFCA_EVT_WTX_REQUEST when the secure element needs more time than expected to compute a command. If this timeout expired, a first recovery tentative consist to send a simple software reset proprietary command. If this tentative still fail, a second recovery tentative consist to send a hardware reset proprietary command. This function is only relevant for eSE like secure element. This patch also change the way a pipe is referenced. There can be different pipe connected to the same gate with different host destination (ex: CONNECTIVITY). In order to keep host information every pipe are reference with a tuple (gate, host). In order to reduce changes, we are keeping unchanged the way a gate is addressed on the Terminal Host. However, this is working because we consider the apdu reader gate is only present on the eSE slot also the connectivity gate cannot give a reliable value; it will give the latest stored pipe value. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-27 03:18:19 +03:00
{
treewide: setup_timer() -> timer_setup() (2 field) This converts all remaining setup_timer() calls that use a nested field to reach a struct timer_list. Coccinelle does not have an easy way to match multiple fields, so a new script is needed to change the matches of "&_E->_timer" into "&_E->_field1._timer" in all the rules. spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup-2fields.cocci @fix_address_of depends@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _field1; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_field1._timer, NULL, _E); +timer_setup(&_E->_field1._timer, NULL, 0); | -setup_timer(&_E->_field1._timer, NULL, (_cast_data)_E); +timer_setup(&_E->_field1._timer, NULL, 0); | -setup_timer(&_E._field1._timer, NULL, &_E); +timer_setup(&_E._field1._timer, NULL, 0); | -setup_timer(&_E._field1._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._field1._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _field1; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_field1._timer, _callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, &_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | _E->_field1._timer@_stl.function = _callback; | _E->_field1._timer@_stl.function = &_callback; | _E->_field1._timer@_stl.function = (_cast_func)_callback; | _E->_field1._timer@_stl.function = (_cast_func)&_callback; | _E._field1._timer@_stl.function = _callback; | _E._field1._timer@_stl.function = &_callback; | _E._field1._timer@_stl.function = (_cast_func)_callback; | _E._field1._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _field1._timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _field1._timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _field1._timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_field1._timer, _callback, 0); +setup_timer(&_E->_field1._timer, _callback, (_cast_data)_E); | -timer_setup(&_E._field1._timer, _callback, 0); +setup_timer(&_E._field1._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_field1._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_field1._timer | -(_cast_data)&_E +&_E._field1._timer | -_E +&_E->_field1._timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _field1; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_field1._timer, _callback, 0); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, 0L); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, 0UL); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0L); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0UL); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0L); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0UL); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0); +timer_setup(_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0L); +timer_setup(_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0UL); +timer_setup(_field1._timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-10-18 06:21:24 +03:00
struct st21nfca_hci_info *info = from_timer(info, t,
se_info.se_active_timer);
NFC: st21nfca: Adding support for secure element st21nfca has 1 physical SWP line and can support up to 2 secure elements (UICC & eSE) thanks to an external switch managed with a gpio. The platform integrator needs to specify thanks to 2 initialization properties, uicc-present and ese-present, if it is suppose to have uicc and/or ese. Of course if the platform does not have an external switch, only one kind of secure element can be supported. Those parameters are under platform integrator responsibilities. During initialization, the white_list will be set according to those parameters. The discovery_se function will assume a secure element is physically present according to uicc-present and ese-present values and will add it to the secure element list. On ese activation, the atr is retrieved to calculate a command exchange timeout based on the first atr(TB) value. The se_io will allow to transfer data over SWP. 2 kind of events may appear after a data is sent over: - ST21NFCA_EVT_TRANSMIT_DATA when receiving an apdu answer - ST21NFCA_EVT_WTX_REQUEST when the secure element needs more time than expected to compute a command. If this timeout expired, a first recovery tentative consist to send a simple software reset proprietary command. If this tentative still fail, a second recovery tentative consist to send a hardware reset proprietary command. This function is only relevant for eSE like secure element. This patch also change the way a pipe is referenced. There can be different pipe connected to the same gate with different host destination (ex: CONNECTIVITY). In order to keep host information every pipe are reference with a tuple (gate, host). In order to reduce changes, we are keeping unchanged the way a gate is addressed on the Terminal Host. However, this is working because we consider the apdu reader gate is only present on the eSE slot also the connectivity gate cannot give a reliable value; it will give the latest stored pipe value. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-27 03:18:19 +03:00
pr_debug("\n");
info->se_info.se_active = false;
complete(&info->se_info.req_completion);
}
/*
* Returns:
* <= 0: driver handled the event, skb consumed
* 1: driver does not handle the event, please do standard processing
*/
int st21nfca_connectivity_event_received(struct nfc_hci_dev *hdev, u8 host,
u8 event, struct sk_buff *skb)
{
int r = 0;
NFC: st21nfca: Add HCI transaction event support The transaction notifies the host (DH) that an action is required to manage a specific Secure Element application. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-02 00:26:20 +03:00
struct device *dev = &hdev->ndev->dev;
struct nfc_evt_transaction *transaction;
NFC: st21nfca: Adding support for secure element st21nfca has 1 physical SWP line and can support up to 2 secure elements (UICC & eSE) thanks to an external switch managed with a gpio. The platform integrator needs to specify thanks to 2 initialization properties, uicc-present and ese-present, if it is suppose to have uicc and/or ese. Of course if the platform does not have an external switch, only one kind of secure element can be supported. Those parameters are under platform integrator responsibilities. During initialization, the white_list will be set according to those parameters. The discovery_se function will assume a secure element is physically present according to uicc-present and ese-present values and will add it to the secure element list. On ese activation, the atr is retrieved to calculate a command exchange timeout based on the first atr(TB) value. The se_io will allow to transfer data over SWP. 2 kind of events may appear after a data is sent over: - ST21NFCA_EVT_TRANSMIT_DATA when receiving an apdu answer - ST21NFCA_EVT_WTX_REQUEST when the secure element needs more time than expected to compute a command. If this timeout expired, a first recovery tentative consist to send a simple software reset proprietary command. If this tentative still fail, a second recovery tentative consist to send a hardware reset proprietary command. This function is only relevant for eSE like secure element. This patch also change the way a pipe is referenced. There can be different pipe connected to the same gate with different host destination (ex: CONNECTIVITY). In order to keep host information every pipe are reference with a tuple (gate, host). In order to reduce changes, we are keeping unchanged the way a gate is addressed on the Terminal Host. However, this is working because we consider the apdu reader gate is only present on the eSE slot also the connectivity gate cannot give a reliable value; it will give the latest stored pipe value. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-27 03:18:19 +03:00
pr_debug("connectivity gate event: %x\n", event);
switch (event) {
case ST21NFCA_EVT_CONNECTIVITY:
nfc: st21nfca: Add support for HCI event connectivity Add support for connectivity event Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-24 01:45:20 +03:00
r = nfc_se_connectivity(hdev->ndev, host);
nfc: st21nfca: Code cleanup A few code cleanups, mostly empty lines removal. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-24 01:45:13 +03:00
break;
NFC: st21nfca: Adding support for secure element st21nfca has 1 physical SWP line and can support up to 2 secure elements (UICC & eSE) thanks to an external switch managed with a gpio. The platform integrator needs to specify thanks to 2 initialization properties, uicc-present and ese-present, if it is suppose to have uicc and/or ese. Of course if the platform does not have an external switch, only one kind of secure element can be supported. Those parameters are under platform integrator responsibilities. During initialization, the white_list will be set according to those parameters. The discovery_se function will assume a secure element is physically present according to uicc-present and ese-present values and will add it to the secure element list. On ese activation, the atr is retrieved to calculate a command exchange timeout based on the first atr(TB) value. The se_io will allow to transfer data over SWP. 2 kind of events may appear after a data is sent over: - ST21NFCA_EVT_TRANSMIT_DATA when receiving an apdu answer - ST21NFCA_EVT_WTX_REQUEST when the secure element needs more time than expected to compute a command. If this timeout expired, a first recovery tentative consist to send a simple software reset proprietary command. If this tentative still fail, a second recovery tentative consist to send a hardware reset proprietary command. This function is only relevant for eSE like secure element. This patch also change the way a pipe is referenced. There can be different pipe connected to the same gate with different host destination (ex: CONNECTIVITY). In order to keep host information every pipe are reference with a tuple (gate, host). In order to reduce changes, we are keeping unchanged the way a gate is addressed on the Terminal Host. However, this is working because we consider the apdu reader gate is only present on the eSE slot also the connectivity gate cannot give a reliable value; it will give the latest stored pipe value. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-27 03:18:19 +03:00
case ST21NFCA_EVT_TRANSACTION:
nfc: st21nfca: Add additional comments about EVT_TRANSACTION Add comments about HCI EVT_TRANSACTION in order to make the code understandable by other readers. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-03-31 09:02:23 +03:00
/*
* According to specification etsi 102 622
* 11.2.2.4 EVT_TRANSACTION Table 52
* Description Tag Length
* AID 81 5 to 16
* PARAMETERS 82 0 to 255
*/
NFC: st21nfca: Add HCI transaction event support The transaction notifies the host (DH) that an action is required to manage a specific Secure Element application. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-02 00:26:20 +03:00
if (skb->len < NFC_MIN_AID_LENGTH + 2 &&
skb->data[0] != NFC_EVT_TRANSACTION_AID_TAG)
return -EPROTO;
transaction = (struct nfc_evt_transaction *)devm_kzalloc(dev,
skb->len - 2, GFP_KERNEL);
transaction->aid_len = skb->data[1];
nfc: st21nfca: Add additional comments about EVT_TRANSACTION Add comments about HCI EVT_TRANSACTION in order to make the code understandable by other readers. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-03-31 09:02:23 +03:00
memcpy(transaction->aid, &skb->data[2],
transaction->aid_len);
NFC: st21nfca: Add HCI transaction event support The transaction notifies the host (DH) that an action is required to manage a specific Secure Element application. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-02 00:26:20 +03:00
nfc: st21nfca: Add additional comments about EVT_TRANSACTION Add comments about HCI EVT_TRANSACTION in order to make the code understandable by other readers. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-03-31 09:02:23 +03:00
/* Check next byte is PARAMETERS tag (82) */
NFC: st21nfca: Add HCI transaction event support The transaction notifies the host (DH) that an action is required to manage a specific Secure Element application. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-02 00:26:20 +03:00
if (skb->data[transaction->aid_len + 2] !=
NFC_EVT_TRANSACTION_PARAMS_TAG)
return -EPROTO;
transaction->params_len = skb->data[transaction->aid_len + 3];
memcpy(transaction->params, skb->data +
transaction->aid_len + 4, transaction->params_len);
r = nfc_se_transaction(hdev->ndev, host, transaction);
nfc: st21nfca: Code cleanup A few code cleanups, mostly empty lines removal. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-24 01:45:13 +03:00
break;
NFC: st21nfca: Adding support for secure element st21nfca has 1 physical SWP line and can support up to 2 secure elements (UICC & eSE) thanks to an external switch managed with a gpio. The platform integrator needs to specify thanks to 2 initialization properties, uicc-present and ese-present, if it is suppose to have uicc and/or ese. Of course if the platform does not have an external switch, only one kind of secure element can be supported. Those parameters are under platform integrator responsibilities. During initialization, the white_list will be set according to those parameters. The discovery_se function will assume a secure element is physically present according to uicc-present and ese-present values and will add it to the secure element list. On ese activation, the atr is retrieved to calculate a command exchange timeout based on the first atr(TB) value. The se_io will allow to transfer data over SWP. 2 kind of events may appear after a data is sent over: - ST21NFCA_EVT_TRANSMIT_DATA when receiving an apdu answer - ST21NFCA_EVT_WTX_REQUEST when the secure element needs more time than expected to compute a command. If this timeout expired, a first recovery tentative consist to send a simple software reset proprietary command. If this tentative still fail, a second recovery tentative consist to send a hardware reset proprietary command. This function is only relevant for eSE like secure element. This patch also change the way a pipe is referenced. There can be different pipe connected to the same gate with different host destination (ex: CONNECTIVITY). In order to keep host information every pipe are reference with a tuple (gate, host). In order to reduce changes, we are keeping unchanged the way a gate is addressed on the Terminal Host. However, this is working because we consider the apdu reader gate is only present on the eSE slot also the connectivity gate cannot give a reliable value; it will give the latest stored pipe value. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-27 03:18:19 +03:00
default:
NFC: st21nfca: Add error messages for unexpected HCI events Potentially an unexpected HCI event may occur because of a firmware bug. It could be transparent for the user but we should at least log it. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26 00:54:47 +03:00
nfc_err(&hdev->ndev->dev, "Unexpected event on connectivity gate\n");
NFC: st21nfca: Adding support for secure element st21nfca has 1 physical SWP line and can support up to 2 secure elements (UICC & eSE) thanks to an external switch managed with a gpio. The platform integrator needs to specify thanks to 2 initialization properties, uicc-present and ese-present, if it is suppose to have uicc and/or ese. Of course if the platform does not have an external switch, only one kind of secure element can be supported. Those parameters are under platform integrator responsibilities. During initialization, the white_list will be set according to those parameters. The discovery_se function will assume a secure element is physically present according to uicc-present and ese-present values and will add it to the secure element list. On ese activation, the atr is retrieved to calculate a command exchange timeout based on the first atr(TB) value. The se_io will allow to transfer data over SWP. 2 kind of events may appear after a data is sent over: - ST21NFCA_EVT_TRANSMIT_DATA when receiving an apdu answer - ST21NFCA_EVT_WTX_REQUEST when the secure element needs more time than expected to compute a command. If this timeout expired, a first recovery tentative consist to send a simple software reset proprietary command. If this tentative still fail, a second recovery tentative consist to send a hardware reset proprietary command. This function is only relevant for eSE like secure element. This patch also change the way a pipe is referenced. There can be different pipe connected to the same gate with different host destination (ex: CONNECTIVITY). In order to keep host information every pipe are reference with a tuple (gate, host). In order to reduce changes, we are keeping unchanged the way a gate is addressed on the Terminal Host. However, this is working because we consider the apdu reader gate is only present on the eSE slot also the connectivity gate cannot give a reliable value; it will give the latest stored pipe value. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-27 03:18:19 +03:00
return 1;
}
kfree_skb(skb);
return r;
}
EXPORT_SYMBOL(st21nfca_connectivity_event_received);
int st21nfca_apdu_reader_event_received(struct nfc_hci_dev *hdev,
u8 event, struct sk_buff *skb)
{
int r = 0;
struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
pr_debug("apdu reader gate event: %x\n", event);
switch (event) {
case ST21NFCA_EVT_TRANSMIT_DATA:
del_timer_sync(&info->se_info.bwi_timer);
info->se_info.bwi_active = false;
r = nfc_hci_send_event(hdev, ST21NFCA_DEVICE_MGNT_GATE,
ST21NFCA_EVT_SE_END_OF_APDU_TRANSFER, NULL, 0);
if (r < 0)
goto exit;
info->se_info.cb(info->se_info.cb_context,
skb->data, skb->len, 0);
break;
case ST21NFCA_EVT_WTX_REQUEST:
mod_timer(&info->se_info.bwi_timer, jiffies +
msecs_to_jiffies(info->se_info.wt_timeout));
break;
NFC: st21nfca: Add error messages for unexpected HCI events Potentially an unexpected HCI event may occur because of a firmware bug. It could be transparent for the user but we should at least log it. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26 00:54:47 +03:00
default:
nfc_err(&hdev->ndev->dev, "Unexpected event on apdu reader gate\n");
return 1;
NFC: st21nfca: Adding support for secure element st21nfca has 1 physical SWP line and can support up to 2 secure elements (UICC & eSE) thanks to an external switch managed with a gpio. The platform integrator needs to specify thanks to 2 initialization properties, uicc-present and ese-present, if it is suppose to have uicc and/or ese. Of course if the platform does not have an external switch, only one kind of secure element can be supported. Those parameters are under platform integrator responsibilities. During initialization, the white_list will be set according to those parameters. The discovery_se function will assume a secure element is physically present according to uicc-present and ese-present values and will add it to the secure element list. On ese activation, the atr is retrieved to calculate a command exchange timeout based on the first atr(TB) value. The se_io will allow to transfer data over SWP. 2 kind of events may appear after a data is sent over: - ST21NFCA_EVT_TRANSMIT_DATA when receiving an apdu answer - ST21NFCA_EVT_WTX_REQUEST when the secure element needs more time than expected to compute a command. If this timeout expired, a first recovery tentative consist to send a simple software reset proprietary command. If this tentative still fail, a second recovery tentative consist to send a hardware reset proprietary command. This function is only relevant for eSE like secure element. This patch also change the way a pipe is referenced. There can be different pipe connected to the same gate with different host destination (ex: CONNECTIVITY). In order to keep host information every pipe are reference with a tuple (gate, host). In order to reduce changes, we are keeping unchanged the way a gate is addressed on the Terminal Host. However, this is working because we consider the apdu reader gate is only present on the eSE slot also the connectivity gate cannot give a reliable value; it will give the latest stored pipe value. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-27 03:18:19 +03:00
}
exit:
kfree_skb(skb);
return r;
}
EXPORT_SYMBOL(st21nfca_apdu_reader_event_received);
void st21nfca_se_init(struct nfc_hci_dev *hdev)
{
struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
init_completion(&info->se_info.req_completion);
/* initialize timers */
treewide: setup_timer() -> timer_setup() (2 field) This converts all remaining setup_timer() calls that use a nested field to reach a struct timer_list. Coccinelle does not have an easy way to match multiple fields, so a new script is needed to change the matches of "&_E->_timer" into "&_E->_field1._timer" in all the rules. spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup-2fields.cocci @fix_address_of depends@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _field1; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_field1._timer, NULL, _E); +timer_setup(&_E->_field1._timer, NULL, 0); | -setup_timer(&_E->_field1._timer, NULL, (_cast_data)_E); +timer_setup(&_E->_field1._timer, NULL, 0); | -setup_timer(&_E._field1._timer, NULL, &_E); +timer_setup(&_E._field1._timer, NULL, 0); | -setup_timer(&_E._field1._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._field1._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _field1; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_field1._timer, _callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, &_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | _E->_field1._timer@_stl.function = _callback; | _E->_field1._timer@_stl.function = &_callback; | _E->_field1._timer@_stl.function = (_cast_func)_callback; | _E->_field1._timer@_stl.function = (_cast_func)&_callback; | _E._field1._timer@_stl.function = _callback; | _E._field1._timer@_stl.function = &_callback; | _E._field1._timer@_stl.function = (_cast_func)_callback; | _E._field1._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _field1._timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _field1._timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _field1._timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_field1._timer, _callback, 0); +setup_timer(&_E->_field1._timer, _callback, (_cast_data)_E); | -timer_setup(&_E._field1._timer, _callback, 0); +setup_timer(&_E._field1._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_field1._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_field1._timer | -(_cast_data)&_E +&_E._field1._timer | -_E +&_E->_field1._timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _field1; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_field1._timer, _callback, 0); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, 0L); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, 0UL); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0L); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0UL); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0L); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0UL); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0); +timer_setup(_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0L); +timer_setup(_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0UL); +timer_setup(_field1._timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-10-18 06:21:24 +03:00
timer_setup(&info->se_info.bwi_timer, st21nfca_se_wt_timeout, 0);
NFC: st21nfca: Adding support for secure element st21nfca has 1 physical SWP line and can support up to 2 secure elements (UICC & eSE) thanks to an external switch managed with a gpio. The platform integrator needs to specify thanks to 2 initialization properties, uicc-present and ese-present, if it is suppose to have uicc and/or ese. Of course if the platform does not have an external switch, only one kind of secure element can be supported. Those parameters are under platform integrator responsibilities. During initialization, the white_list will be set according to those parameters. The discovery_se function will assume a secure element is physically present according to uicc-present and ese-present values and will add it to the secure element list. On ese activation, the atr is retrieved to calculate a command exchange timeout based on the first atr(TB) value. The se_io will allow to transfer data over SWP. 2 kind of events may appear after a data is sent over: - ST21NFCA_EVT_TRANSMIT_DATA when receiving an apdu answer - ST21NFCA_EVT_WTX_REQUEST when the secure element needs more time than expected to compute a command. If this timeout expired, a first recovery tentative consist to send a simple software reset proprietary command. If this tentative still fail, a second recovery tentative consist to send a hardware reset proprietary command. This function is only relevant for eSE like secure element. This patch also change the way a pipe is referenced. There can be different pipe connected to the same gate with different host destination (ex: CONNECTIVITY). In order to keep host information every pipe are reference with a tuple (gate, host). In order to reduce changes, we are keeping unchanged the way a gate is addressed on the Terminal Host. However, this is working because we consider the apdu reader gate is only present on the eSE slot also the connectivity gate cannot give a reliable value; it will give the latest stored pipe value. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-27 03:18:19 +03:00
info->se_info.bwi_active = false;
treewide: setup_timer() -> timer_setup() (2 field) This converts all remaining setup_timer() calls that use a nested field to reach a struct timer_list. Coccinelle does not have an easy way to match multiple fields, so a new script is needed to change the matches of "&_E->_timer" into "&_E->_field1._timer" in all the rules. spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup-2fields.cocci @fix_address_of depends@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _field1; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_field1._timer, NULL, _E); +timer_setup(&_E->_field1._timer, NULL, 0); | -setup_timer(&_E->_field1._timer, NULL, (_cast_data)_E); +timer_setup(&_E->_field1._timer, NULL, 0); | -setup_timer(&_E._field1._timer, NULL, &_E); +timer_setup(&_E._field1._timer, NULL, 0); | -setup_timer(&_E._field1._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._field1._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _field1; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_field1._timer, _callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, &_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | _E->_field1._timer@_stl.function = _callback; | _E->_field1._timer@_stl.function = &_callback; | _E->_field1._timer@_stl.function = (_cast_func)_callback; | _E->_field1._timer@_stl.function = (_cast_func)&_callback; | _E._field1._timer@_stl.function = _callback; | _E._field1._timer@_stl.function = &_callback; | _E._field1._timer@_stl.function = (_cast_func)_callback; | _E._field1._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _field1._timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _field1._timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _field1._timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_field1._timer, _callback, 0); +setup_timer(&_E->_field1._timer, _callback, (_cast_data)_E); | -timer_setup(&_E._field1._timer, _callback, 0); +setup_timer(&_E._field1._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_field1._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_field1._timer | -(_cast_data)&_E +&_E._field1._timer | -_E +&_E->_field1._timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _field1; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_field1._timer, _callback, 0); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, 0L); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, 0UL); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0L); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0UL); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0L); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0UL); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0); +timer_setup(_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0L); +timer_setup(_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0UL); +timer_setup(_field1._timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-10-18 06:21:24 +03:00
timer_setup(&info->se_info.se_active_timer,
st21nfca_se_activation_timeout, 0);
NFC: st21nfca: Adding support for secure element st21nfca has 1 physical SWP line and can support up to 2 secure elements (UICC & eSE) thanks to an external switch managed with a gpio. The platform integrator needs to specify thanks to 2 initialization properties, uicc-present and ese-present, if it is suppose to have uicc and/or ese. Of course if the platform does not have an external switch, only one kind of secure element can be supported. Those parameters are under platform integrator responsibilities. During initialization, the white_list will be set according to those parameters. The discovery_se function will assume a secure element is physically present according to uicc-present and ese-present values and will add it to the secure element list. On ese activation, the atr is retrieved to calculate a command exchange timeout based on the first atr(TB) value. The se_io will allow to transfer data over SWP. 2 kind of events may appear after a data is sent over: - ST21NFCA_EVT_TRANSMIT_DATA when receiving an apdu answer - ST21NFCA_EVT_WTX_REQUEST when the secure element needs more time than expected to compute a command. If this timeout expired, a first recovery tentative consist to send a simple software reset proprietary command. If this tentative still fail, a second recovery tentative consist to send a hardware reset proprietary command. This function is only relevant for eSE like secure element. This patch also change the way a pipe is referenced. There can be different pipe connected to the same gate with different host destination (ex: CONNECTIVITY). In order to keep host information every pipe are reference with a tuple (gate, host). In order to reduce changes, we are keeping unchanged the way a gate is addressed on the Terminal Host. However, this is working because we consider the apdu reader gate is only present on the eSE slot also the connectivity gate cannot give a reliable value; it will give the latest stored pipe value. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-27 03:18:19 +03:00
info->se_info.se_active = false;
info->se_info.count_pipes = 0;
info->se_info.expected_pipes = 0;
info->se_info.xch_error = false;
info->se_info.wt_timeout =
ST21NFCA_BWI_TO_TIMEOUT(ST21NFCA_ATR_DEFAULT_BWI);
}
EXPORT_SYMBOL(st21nfca_se_init);
void st21nfca_se_deinit(struct nfc_hci_dev *hdev)
{
struct st21nfca_hci_info *info = nfc_hci_get_clientdata(hdev);
if (info->se_info.bwi_active)
del_timer_sync(&info->se_info.bwi_timer);
if (info->se_info.se_active)
del_timer_sync(&info->se_info.se_active_timer);
info->se_info.bwi_active = false;
info->se_info.se_active = false;
}
EXPORT_SYMBOL(st21nfca_se_deinit);