WSL2-Linux-Kernel/kernel/mutex.c

/*
 * kernel/mutex.c
 *
 * Mutexes: blocking mutual exclusion locks
 *
 * Started by Ingo Molnar:
 *
 *  Copyright (C) 2004, 2005, 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
 *
 * Many thanks to Arjan van de Ven, Thomas Gleixner, Steven Rostedt and
 * David Howells for suggestions and improvements.
 *
 * Also see Documentation/mutex-design.txt.
 */
#include <linux/mutex.h>
#include <linux/sched.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>

/*
 * In the DEBUG case we are using the "NULL fastpath" for mutexes,
 * which forces all calls into the slowpath:
 */
#ifdef CONFIG_DEBUG_MUTEXES
# include "mutex-debug.h"
# include <asm-generic/mutex-null.h>
#else
# include "mutex.h"
# include <asm/mutex.h>
#endif

/***
 * mutex_init - initialize the mutex
 * @lock: the mutex to be initialized
 *
 * Initialize the mutex to unlocked state.
 *
 * It is not allowed to initialize an already locked mutex.
 */
void fastcall __mutex_init(struct mutex *lock, const char *name)
{
	atomic_set(&lock->count, 1);
	spin_lock_init(&lock->wait_lock);
	INIT_LIST_HEAD(&lock->wait_list);

	debug_mutex_init(lock, name);
}

EXPORT_SYMBOL(__mutex_init);

/*
 * We split the mutex lock/unlock logic into separate fastpath and
 * slowpath functions, to reduce the register pressure on the fastpath.
 * We also put the fastpath first in the kernel image, to make sure the
 * branch is predicted by the CPU as default-untaken.
 */
static void fastcall noinline __sched
__mutex_lock_slowpath(atomic_t *lock_count __IP_DECL__);

/***
 * mutex_lock - acquire the mutex
 * @lock: the mutex to be acquired
 *
 * Lock the mutex exclusively for this task. If the mutex is not
 * available right now, it will sleep until it can get it.
 *
 * The mutex must later on be released by the same task that
 * acquired it. Recursive locking is not allowed. The task
 * may not exit without first unlocking the mutex. Also, kernel
 * memory where the mutex resides mutex must not be freed with
 * the mutex still locked. The mutex must first be initialized
 * (or statically defined) before it can be locked. memset()-ing
 * the mutex to 0 is not allowed.
 *
 * ( The CONFIG_DEBUG_MUTEXES .config option turns on debugging
 *   checks that will enforce the restrictions and will also do
 *   deadlock debugging. )
 *
 * This function is similar to (but not equivalent to) down().
 */
void fastcall __sched mutex_lock(struct mutex *lock)
{
	might_sleep();
	/*
	 * The locking fastpath is the 1->0 transition from
	 * 'unlocked' into 'locked' state.
	 */
	__mutex_fastpath_lock(&lock->count, __mutex_lock_slowpath);
}

EXPORT_SYMBOL(mutex_lock);

static void fastcall noinline __sched
__mutex_unlock_slowpath(atomic_t *lock_count __IP_DECL__);

/***
 * mutex_unlock - release the mutex
 * @lock: the mutex to be released
 *
 * Unlock a mutex that has been locked by this task previously.
 *
 * This function must not be used in interrupt context. Unlocking
 * of a not locked mutex is not allowed.
 *
 * This function is similar to (but not equivalent to) up().
 */
void fastcall __sched mutex_unlock(struct mutex *lock)
{
	/*
	 * The unlocking fastpath is the 0->1 transition from 'locked'
	 * into 'unlocked' state:
	 */
	__mutex_fastpath_unlock(&lock->count, __mutex_unlock_slowpath);
}

EXPORT_SYMBOL(mutex_unlock);

/*
 * Lock a mutex (possibly interruptible), slowpath:
 */
static inline int __sched
__mutex_lock_common(struct mutex *lock, long state __IP_DECL__)
{
	struct task_struct *task = current;
	struct mutex_waiter waiter;
	unsigned int old_val;

	debug_mutex_init_waiter(&waiter);

	spin_lock_mutex(&lock->wait_lock);

	debug_mutex_add_waiter(lock, &waiter, task->thread_info, ip);

	/* add waiting tasks to the end of the waitqueue (FIFO): */
	list_add_tail(&waiter.list, &lock->wait_list);
	waiter.task = task;

	for (;;) {
		/*
		 * Lets try to take the lock again - this is needed even if
		 * we get here for the first time (shortly after failing to
		 * acquire the lock), to make sure that we get a wakeup once
		 * it's unlocked. Later on, if we sleep, this is the
		 * operation that gives us the lock. We xchg it to -1, so
		 * that when we release the lock, we properly wake up the
		 * other waiters:
		 */
		old_val = atomic_xchg(&lock->count, -1);
		if (old_val == 1)
			break;

		/*
		 * got a signal? (This code gets eliminated in the
		 * TASK_UNINTERRUPTIBLE case.)
		 */
		if (unlikely(state == TASK_INTERRUPTIBLE &&
						signal_pending(task))) {
			mutex_remove_waiter(lock, &waiter, task->thread_info);
			spin_unlock_mutex(&lock->wait_lock);

			debug_mutex_free_waiter(&waiter);
			return -EINTR;
		}
		__set_task_state(task, state);

		/* didnt get the lock, go to sleep: */
		spin_unlock_mutex(&lock->wait_lock);
		schedule();
		spin_lock_mutex(&lock->wait_lock);
	}

	/* got the lock - rejoice! */
	mutex_remove_waiter(lock, &waiter, task->thread_info);
	debug_mutex_set_owner(lock, task->thread_info __IP__);

	/* set it to 0 if there are no waiters left: */
	if (likely(list_empty(&lock->wait_list)))
		atomic_set(&lock->count, 0);

	spin_unlock_mutex(&lock->wait_lock);

	debug_mutex_free_waiter(&waiter);

	DEBUG_WARN_ON(list_empty(&lock->held_list));
	DEBUG_WARN_ON(lock->owner != task->thread_info);

	return 0;
}

static void fastcall noinline __sched
__mutex_lock_slowpath(atomic_t *lock_count __IP_DECL__)
{
	struct mutex *lock = container_of(lock_count, struct mutex, count);

	__mutex_lock_common(lock, TASK_UNINTERRUPTIBLE __IP__);
}

/*
 * Release the lock, slowpath:
 */
static fastcall noinline void
__mutex_unlock_slowpath(atomic_t *lock_count __IP_DECL__)
{
	struct mutex *lock = container_of(lock_count, struct mutex, count);

	DEBUG_WARN_ON(lock->owner != current_thread_info());

	spin_lock_mutex(&lock->wait_lock);

	/*
	 * some architectures leave the lock unlocked in the fastpath failure
	 * case, others need to leave it locked. In the later case we have to
	 * unlock it here
	 */
	if (__mutex_slowpath_needs_to_unlock())
		atomic_set(&lock->count, 1);

	debug_mutex_unlock(lock);

	if (!list_empty(&lock->wait_list)) {
		/* get the first entry from the wait-list: */
		struct mutex_waiter *waiter =
				list_entry(lock->wait_list.next,
					   struct mutex_waiter, list);

		debug_mutex_wake_waiter(lock, waiter);

		wake_up_process(waiter->task);
	}

	debug_mutex_clear_owner(lock);

	spin_unlock_mutex(&lock->wait_lock);
}

/*
 * Here come the less common (and hence less performance-critical) APIs:
 * mutex_lock_interruptible() and mutex_trylock().
 */
static int fastcall noinline __sched
__mutex_lock_interruptible_slowpath(atomic_t *lock_count __IP_DECL__);

/***
 * mutex_lock_interruptible - acquire the mutex, interruptable
 * @lock: the mutex to be acquired
 *
 * Lock the mutex like mutex_lock(), and return 0 if the mutex has
 * been acquired or sleep until the mutex becomes available. If a
 * signal arrives while waiting for the lock then this function
 * returns -EINTR.
 *
 * This function is similar to (but not equivalent to) down_interruptible().
 */
int fastcall __sched mutex_lock_interruptible(struct mutex *lock)
{
	might_sleep();
	return __mutex_fastpath_lock_retval
			(&lock->count, __mutex_lock_interruptible_slowpath);
}

EXPORT_SYMBOL(mutex_lock_interruptible);

static int fastcall noinline __sched
__mutex_lock_interruptible_slowpath(atomic_t *lock_count __IP_DECL__)
{
	struct mutex *lock = container_of(lock_count, struct mutex, count);

	return __mutex_lock_common(lock, TASK_INTERRUPTIBLE __IP__);
}

/*
 * Spinlock based trylock, we take the spinlock and check whether we
 * can get the lock:
 */
static inline int __mutex_trylock_slowpath(atomic_t *lock_count)
{
	struct mutex *lock = container_of(lock_count, struct mutex, count);
	int prev;

	spin_lock_mutex(&lock->wait_lock);

	prev = atomic_xchg(&lock->count, -1);
	if (likely(prev == 1))
		debug_mutex_set_owner(lock, current_thread_info() __RET_IP__);
	/* Set it back to 0 if there are no waiters: */
	if (likely(list_empty(&lock->wait_list)))
		atomic_set(&lock->count, 0);

	spin_unlock_mutex(&lock->wait_lock);

	return prev == 1;
}

/***
 * mutex_trylock - try acquire the mutex, without waiting
 * @lock: the mutex to be acquired
 *
 * Try to acquire the mutex atomically. Returns 1 if the mutex
 * has been acquired successfully, and 0 on contention.
 *
 * NOTE: this function follows the spin_trylock() convention, so
 * it is negated to the down_trylock() return values! Be careful
 * about this when converting semaphore users to mutexes.
 *
 * This function must not be used in interrupt context. The
 * mutex must be released by the same task that acquired it.
 */
int fastcall mutex_trylock(struct mutex *lock)
{
	return __mutex_fastpath_trylock(&lock->count,
					__mutex_trylock_slowpath);
}

EXPORT_SYMBOL(mutex_trylock);