microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/dma/pxa_dma.c

1536 строки
41 KiB
C
Исходник Обычный вид История

dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
/*
* Copyright 2015 Robert Jarzmik <robert.jarzmik@free.fr>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/err.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/dmaengine.h>
#include <linux/platform_device.h>
#include <linux/device.h>
#include <linux/platform_data/mmp_dma.h>
#include <linux/dmapool.h>
#include <linux/of_device.h>
#include <linux/of_dma.h>
#include <linux/of.h>
dmaengine: pxa_dma: implement device_synchronize Implement the function which wait until a dma channel is stopped to have a synchronization point. This also protects the pxad_remove() from races, such as spurious interrupts while removing the driver, because : - as long as there is one dma channel requested, ie. dma_chan_get() but no dma_chan_put(), the try_module_get() of dma_chan_get() prevents the remove() routine from running - when the last channel is released, ie. the last dma_chan_put() is called, if there is a running DMA, pxad_synchronize() is called - pxad_synchronize() waits for the channel to stop, which in turn ensures on pxa architecture that the interrupt cannot be fired anymore Reported-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-11 00:50:49 +03:00
#include <linux/wait.h>
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
#include <linux/dma/pxa-dma.h>
#include "dmaengine.h"
#include "virt-dma.h"
#define DCSR(n) (0x0000 + ((n) << 2))
#define DALGN(n) 0x00a0
#define DINT 0x00f0
#define DDADR(n) (0x0200 + ((n) << 4))
#define DSADR(n) (0x0204 + ((n) << 4))
#define DTADR(n) (0x0208 + ((n) << 4))
#define DCMD(n) (0x020c + ((n) << 4))
#define PXA_DCSR_RUN BIT(31) /* Run Bit (read / write) */
#define PXA_DCSR_NODESC BIT(30) /* No-Descriptor Fetch (read / write) */
#define PXA_DCSR_STOPIRQEN BIT(29) /* Stop Interrupt Enable (R/W) */
#define PXA_DCSR_REQPEND BIT(8) /* Request Pending (read-only) */
#define PXA_DCSR_STOPSTATE BIT(3) /* Stop State (read-only) */
#define PXA_DCSR_ENDINTR BIT(2) /* End Interrupt (read / write) */
#define PXA_DCSR_STARTINTR BIT(1) /* Start Interrupt (read / write) */
#define PXA_DCSR_BUSERR BIT(0) /* Bus Error Interrupt (read / write) */
#define PXA_DCSR_EORIRQEN BIT(28) /* End of Receive IRQ Enable (R/W) */
#define PXA_DCSR_EORJMPEN BIT(27) /* Jump to next descriptor on EOR */
#define PXA_DCSR_EORSTOPEN BIT(26) /* STOP on an EOR */
#define PXA_DCSR_SETCMPST BIT(25) /* Set Descriptor Compare Status */
#define PXA_DCSR_CLRCMPST BIT(24) /* Clear Descriptor Compare Status */
#define PXA_DCSR_CMPST BIT(10) /* The Descriptor Compare Status */
#define PXA_DCSR_EORINTR BIT(9) /* The end of Receive */
#define DRCMR_MAPVLD BIT(7) /* Map Valid (read / write) */
#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */
#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */
#define DDADR_STOP BIT(0) /* Stop (read / write) */
#define PXA_DCMD_INCSRCADDR BIT(31) /* Source Address Increment Setting. */
#define PXA_DCMD_INCTRGADDR BIT(30) /* Target Address Increment Setting. */
#define PXA_DCMD_FLOWSRC BIT(29) /* Flow Control by the source. */
#define PXA_DCMD_FLOWTRG BIT(28) /* Flow Control by the target. */
#define PXA_DCMD_STARTIRQEN BIT(22) /* Start Interrupt Enable */
#define PXA_DCMD_ENDIRQEN BIT(21) /* End Interrupt Enable */
#define PXA_DCMD_ENDIAN BIT(18) /* Device Endian-ness. */
#define PXA_DCMD_BURST8 (1 << 16) /* 8 byte burst */
#define PXA_DCMD_BURST16 (2 << 16) /* 16 byte burst */
#define PXA_DCMD_BURST32 (3 << 16) /* 32 byte burst */
#define PXA_DCMD_WIDTH1 (1 << 14) /* 1 byte width */
#define PXA_DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */
#define PXA_DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */
#define PXA_DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
#define PDMA_ALIGNMENT 3
#define PDMA_MAX_DESC_BYTES (PXA_DCMD_LENGTH & ~((1 << PDMA_ALIGNMENT) - 1))
struct pxad_desc_hw {
u32 ddadr; /* Points to the next descriptor + flags */
u32 dsadr; /* DSADR value for the current transfer */
u32 dtadr; /* DTADR value for the current transfer */
u32 dcmd; /* DCMD value for the current transfer */
} __aligned(16);
struct pxad_desc_sw {
struct virt_dma_desc vd; /* Virtual descriptor */
int nb_desc; /* Number of hw. descriptors */
size_t len; /* Number of bytes xfered */
dma_addr_t first; /* First descriptor's addr */
/* At least one descriptor has an src/dst address not multiple of 8 */
bool misaligned;
bool cyclic;
struct dma_pool *desc_pool; /* Channel's used allocator */
struct pxad_desc_hw *hw_desc[]; /* DMA coherent descriptors */
};
struct pxad_phy {
int idx;
void __iomem *base;
struct pxad_chan *vchan;
};
struct pxad_chan {
struct virt_dma_chan vc; /* Virtual channel */
u32 drcmr; /* Requestor of the channel */
enum pxad_chan_prio prio; /* Required priority of phy */
/*
* At least one desc_sw in submitted or issued transfers on this channel
* has one address such as: addr % 8 != 0. This implies the DALGN
* setting on the phy.
*/
bool misaligned;
struct dma_slave_config cfg; /* Runtime config */
/* protected by vc->lock */
struct pxad_phy *phy;
struct dma_pool *desc_pool; /* Descriptors pool */
dmaengine: pxa: handle bus errors In the current state, upon bus error the driver will spin endlessly, relaunching the last tx, which will fail again and again : - a bus error happens - pxad_chan_handler() is called - as PXA_DCSR_STOPSTATE is true, the last non-terminated transaction is lauched, which is the one triggering the bus error, as it didn't terminate - moreover, the STOP interrupt fires a new, as the STOPIRQEN is still active Break this logic by stopping the automatic relaunch of a dma channel upon a bus error, even if there are still pending issued requests on it. As dma_cookie_status() seems unable to return DMA_ERROR in its current form, ie. there seems no way to mark a DMA_ERROR on a per-async-tx basis, it is chosen in this patch to remember on the channel which transaction failed, and report it in pxad_tx_status(). It's a bit misleading because if T1, T2, T3 and T4 were queued, and T1 was completed while T2 causes a bus error, the status of T3 and T4 will be reported as DMA_IN_PROGRESS, while the channel is actually stopped. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-03-29 00:32:24 +03:00
dma_cookie_t bus_error;
dmaengine: pxa_dma: implement device_synchronize Implement the function which wait until a dma channel is stopped to have a synchronization point. This also protects the pxad_remove() from races, such as spurious interrupts while removing the driver, because : - as long as there is one dma channel requested, ie. dma_chan_get() but no dma_chan_put(), the try_module_get() of dma_chan_get() prevents the remove() routine from running - when the last channel is released, ie. the last dma_chan_put() is called, if there is a running DMA, pxad_synchronize() is called - pxad_synchronize() waits for the channel to stop, which in turn ensures on pxa architecture that the interrupt cannot be fired anymore Reported-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-11 00:50:49 +03:00
wait_queue_head_t wq_state;
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
};
struct pxad_device {
struct dma_device slave;
int nr_chans;
dmaengine: pxa_dma: fix the maximum requestor line The current number of requestor lines is limited to 31. This was an error of a previous commit, as this number is platform dependent, and is actually : - for pxa25x: 40 requestor lines - for pxa27x: 75 requestor lines - for pxa3xx: 100 requestor lines The previous testing did not reveal the faulty constant as on pxa[23]xx platforms, only camera, MSL and USB are above requestor 32, and in these only the camera has a driver using dma. Fixes: e87ffbdf0697 ("dmaengine: pxa_dma: fix the no-requestor case") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Vinod Koul <vinod.koul@intel.com>
2016-02-15 23:57:48 +03:00
int nr_requestors;
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
void __iomem *base;
struct pxad_phy *phys;
spinlock_t phy_lock; /* Phy association */
dmaengine: pxa_dma: add debug information Reuse the debugging features which were available in pxa architecture. This is a copy of the code from arch/arm/plat-pxa/dma, which is doomed to disappear once the conversion is completed towards dmaengine. This is a transfer of the commit "[ARM] pxa/dma: add debugfs entries" (d294948c2ce4e1c85f452154469752cc9b8e876d). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:21 +03:00
#ifdef CONFIG_DEBUG_FS
struct dentry *dbgfs_root;
struct dentry *dbgfs_state;
struct dentry **dbgfs_chan;
#endif
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
};
#define tx_to_pxad_desc(tx) \
container_of(tx, struct pxad_desc_sw, async_tx)
#define to_pxad_chan(dchan) \
container_of(dchan, struct pxad_chan, vc.chan)
#define to_pxad_dev(dmadev) \
container_of(dmadev, struct pxad_device, slave)
#define to_pxad_sw_desc(_vd) \
container_of((_vd), struct pxad_desc_sw, vd)
#define _phy_readl_relaxed(phy, _reg) \
readl_relaxed((phy)->base + _reg((phy)->idx))
#define phy_readl_relaxed(phy, _reg) \
({ \
u32 _v; \
_v = readl_relaxed((phy)->base + _reg((phy)->idx)); \
dev_vdbg(&phy->vchan->vc.chan.dev->device, \
"%s(): readl(%s): 0x%08x\n", __func__, #_reg, \
_v); \
_v; \
})
#define phy_writel(phy, val, _reg) \
do { \
writel((val), (phy)->base + _reg((phy)->idx)); \
dev_vdbg(&phy->vchan->vc.chan.dev->device, \
"%s(): writel(0x%08x, %s)\n", \
__func__, (u32)(val), #_reg); \
} while (0)
#define phy_writel_relaxed(phy, val, _reg) \
do { \
writel_relaxed((val), (phy)->base + _reg((phy)->idx)); \
dev_vdbg(&phy->vchan->vc.chan.dev->device, \
"%s(): writel_relaxed(0x%08x, %s)\n", \
__func__, (u32)(val), #_reg); \
} while (0)
static unsigned int pxad_drcmr(unsigned int line)
{
if (line < 64)
return 0x100 + line * 4;
return 0x1000 + line * 4;
}
dmaengine: pxa_dma: add debug information Reuse the debugging features which were available in pxa architecture. This is a copy of the code from arch/arm/plat-pxa/dma, which is doomed to disappear once the conversion is completed towards dmaengine. This is a transfer of the commit "[ARM] pxa/dma: add debugfs entries" (d294948c2ce4e1c85f452154469752cc9b8e876d). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:21 +03:00
/*
* Debug fs
*/
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
#include <linux/uaccess.h>
#include <linux/seq_file.h>
static int dbg_show_requester_chan(struct seq_file *s, void *p)
{
struct pxad_phy *phy = s->private;
int i;
u32 drcmr;
dmaengine: pxa_dma: fix debug information This fixes the following error: drivers/dma/pxa_dma.c: In function ‘dbg_show_requester_chan’: drivers/dma/pxa_dma.c:192:2: error: void value not ignored as it ought to be pos += seq_printf(s, "DMA channel %d requester :\n", phy->idx); ^ drivers/dma/pxa_dma.c:197:8: error: void value not ignored as it ought to be !!(drcmr & DRCMR_MAPVLD)); ^ scripts/Makefile.build:258: recipe for target 'drivers/dma/pxa_dma.o' failed Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-18 09:15:32 +03:00
seq_printf(s, "DMA channel %d requester :\n", phy->idx);
dmaengine: pxa_dma: add debug information Reuse the debugging features which were available in pxa architecture. This is a copy of the code from arch/arm/plat-pxa/dma, which is doomed to disappear once the conversion is completed towards dmaengine. This is a transfer of the commit "[ARM] pxa/dma: add debugfs entries" (d294948c2ce4e1c85f452154469752cc9b8e876d). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:21 +03:00
for (i = 0; i < 70; i++) {
drcmr = readl_relaxed(phy->base + pxad_drcmr(i));
if ((drcmr & DRCMR_CHLNUM) == phy->idx)
dmaengine: pxa_dma: fix debug information This fixes the following error: drivers/dma/pxa_dma.c: In function ‘dbg_show_requester_chan’: drivers/dma/pxa_dma.c:192:2: error: void value not ignored as it ought to be pos += seq_printf(s, "DMA channel %d requester :\n", phy->idx); ^ drivers/dma/pxa_dma.c:197:8: error: void value not ignored as it ought to be !!(drcmr & DRCMR_MAPVLD)); ^ scripts/Makefile.build:258: recipe for target 'drivers/dma/pxa_dma.o' failed Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-18 09:15:32 +03:00
seq_printf(s, "\tRequester %d (MAPVLD=%d)\n", i,
!!(drcmr & DRCMR_MAPVLD));
dmaengine: pxa_dma: add debug information Reuse the debugging features which were available in pxa architecture. This is a copy of the code from arch/arm/plat-pxa/dma, which is doomed to disappear once the conversion is completed towards dmaengine. This is a transfer of the commit "[ARM] pxa/dma: add debugfs entries" (d294948c2ce4e1c85f452154469752cc9b8e876d). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:21 +03:00
}
dmaengine: pxa_dma: fix debug information This fixes the following error: drivers/dma/pxa_dma.c: In function ‘dbg_show_requester_chan’: drivers/dma/pxa_dma.c:192:2: error: void value not ignored as it ought to be pos += seq_printf(s, "DMA channel %d requester :\n", phy->idx); ^ drivers/dma/pxa_dma.c:197:8: error: void value not ignored as it ought to be !!(drcmr & DRCMR_MAPVLD)); ^ scripts/Makefile.build:258: recipe for target 'drivers/dma/pxa_dma.o' failed Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-18 09:15:32 +03:00
return 0;
dmaengine: pxa_dma: add debug information Reuse the debugging features which were available in pxa architecture. This is a copy of the code from arch/arm/plat-pxa/dma, which is doomed to disappear once the conversion is completed towards dmaengine. This is a transfer of the commit "[ARM] pxa/dma: add debugfs entries" (d294948c2ce4e1c85f452154469752cc9b8e876d). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:21 +03:00
}
static inline int dbg_burst_from_dcmd(u32 dcmd)
{
int burst = (dcmd >> 16) & 0x3;
return burst ? 4 << burst : 0;
}
static int is_phys_valid(unsigned long addr)
{
return pfn_valid(__phys_to_pfn(addr));
}
#define PXA_DCSR_STR(flag) (dcsr & PXA_DCSR_##flag ? #flag" " : "")
#define PXA_DCMD_STR(flag) (dcmd & PXA_DCMD_##flag ? #flag" " : "")
static int dbg_show_descriptors(struct seq_file *s, void *p)
{
struct pxad_phy *phy = s->private;
int i, max_show = 20, burst, width;
u32 dcmd;
unsigned long phys_desc, ddadr;
struct pxad_desc_hw *desc;
phys_desc = ddadr = _phy_readl_relaxed(phy, DDADR);
seq_printf(s, "DMA channel %d descriptors :\n", phy->idx);
seq_printf(s, "[%03d] First descriptor unknown\n", 0);
for (i = 1; i < max_show && is_phys_valid(phys_desc); i++) {
desc = phys_to_virt(phys_desc);
dcmd = desc->dcmd;
burst = dbg_burst_from_dcmd(dcmd);
width = (1 << ((dcmd >> 14) & 0x3)) >> 1;
seq_printf(s, "[%03d] Desc at %08lx(virt %p)\n",
i, phys_desc, desc);
seq_printf(s, "\tDDADR = %08x\n", desc->ddadr);
seq_printf(s, "\tDSADR = %08x\n", desc->dsadr);
seq_printf(s, "\tDTADR = %08x\n", desc->dtadr);
seq_printf(s, "\tDCMD = %08x (%s%s%s%s%s%s%sburst=%d width=%d len=%d)\n",
dcmd,
PXA_DCMD_STR(INCSRCADDR), PXA_DCMD_STR(INCTRGADDR),
PXA_DCMD_STR(FLOWSRC), PXA_DCMD_STR(FLOWTRG),
PXA_DCMD_STR(STARTIRQEN), PXA_DCMD_STR(ENDIRQEN),
PXA_DCMD_STR(ENDIAN), burst, width,
dcmd & PXA_DCMD_LENGTH);
phys_desc = desc->ddadr;
}
if (i == max_show)
seq_printf(s, "[%03d] Desc at %08lx ... max display reached\n",
i, phys_desc);
else
seq_printf(s, "[%03d] Desc at %08lx is %s\n",
i, phys_desc, phys_desc == DDADR_STOP ?
"DDADR_STOP" : "invalid");
return 0;
}
static int dbg_show_chan_state(struct seq_file *s, void *p)
{
struct pxad_phy *phy = s->private;
u32 dcsr, dcmd;
int burst, width;
static const char * const str_prio[] = {
"high", "normal", "low", "invalid"
};
dcsr = _phy_readl_relaxed(phy, DCSR);
dcmd = _phy_readl_relaxed(phy, DCMD);
burst = dbg_burst_from_dcmd(dcmd);
width = (1 << ((dcmd >> 14) & 0x3)) >> 1;
seq_printf(s, "DMA channel %d\n", phy->idx);
seq_printf(s, "\tPriority : %s\n",
str_prio[(phy->idx & 0xf) / 4]);
seq_printf(s, "\tUnaligned transfer bit: %s\n",
_phy_readl_relaxed(phy, DALGN) & BIT(phy->idx) ?
"yes" : "no");
seq_printf(s, "\tDCSR = %08x (%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s)\n",
dcsr, PXA_DCSR_STR(RUN), PXA_DCSR_STR(NODESC),
PXA_DCSR_STR(STOPIRQEN), PXA_DCSR_STR(EORIRQEN),
PXA_DCSR_STR(EORJMPEN), PXA_DCSR_STR(EORSTOPEN),
PXA_DCSR_STR(SETCMPST), PXA_DCSR_STR(CLRCMPST),
PXA_DCSR_STR(CMPST), PXA_DCSR_STR(EORINTR),
PXA_DCSR_STR(REQPEND), PXA_DCSR_STR(STOPSTATE),
PXA_DCSR_STR(ENDINTR), PXA_DCSR_STR(STARTINTR),
PXA_DCSR_STR(BUSERR));
seq_printf(s, "\tDCMD = %08x (%s%s%s%s%s%s%sburst=%d width=%d len=%d)\n",
dcmd,
PXA_DCMD_STR(INCSRCADDR), PXA_DCMD_STR(INCTRGADDR),
PXA_DCMD_STR(FLOWSRC), PXA_DCMD_STR(FLOWTRG),
PXA_DCMD_STR(STARTIRQEN), PXA_DCMD_STR(ENDIRQEN),
PXA_DCMD_STR(ENDIAN), burst, width, dcmd & PXA_DCMD_LENGTH);
seq_printf(s, "\tDSADR = %08x\n", _phy_readl_relaxed(phy, DSADR));
seq_printf(s, "\tDTADR = %08x\n", _phy_readl_relaxed(phy, DTADR));
seq_printf(s, "\tDDADR = %08x\n", _phy_readl_relaxed(phy, DDADR));
return 0;
}
static int dbg_show_state(struct seq_file *s, void *p)
{
struct pxad_device *pdev = s->private;
/* basic device status */
seq_puts(s, "DMA engine status\n");
seq_printf(s, "\tChannel number: %d\n", pdev->nr_chans);
return 0;
}
#define DBGFS_FUNC_DECL(name) \
static int dbg_open_##name(struct inode *inode, struct file *file) \
{ \
return single_open(file, dbg_show_##name, inode->i_private); \
} \
static const struct file_operations dbg_fops_##name = { \
.open = dbg_open_##name, \
.llseek = seq_lseek, \
.read = seq_read, \
.release = single_release, \
}
DBGFS_FUNC_DECL(state);
DBGFS_FUNC_DECL(chan_state);
DBGFS_FUNC_DECL(descriptors);
DBGFS_FUNC_DECL(requester_chan);
static struct dentry *pxad_dbg_alloc_chan(struct pxad_device *pdev,
int ch, struct dentry *chandir)
{
char chan_name[11];
struct dentry *chan, *chan_state = NULL, *chan_descr = NULL;
struct dentry *chan_reqs = NULL;
void *dt;
scnprintf(chan_name, sizeof(chan_name), "%d", ch);
chan = debugfs_create_dir(chan_name, chandir);
dt = (void *)&pdev->phys[ch];
if (chan)
chan_state = debugfs_create_file("state", 0400, chan, dt,
&dbg_fops_chan_state);
if (chan_state)
chan_descr = debugfs_create_file("descriptors", 0400, chan, dt,
&dbg_fops_descriptors);
if (chan_descr)
chan_reqs = debugfs_create_file("requesters", 0400, chan, dt,
&dbg_fops_requester_chan);
if (!chan_reqs)
goto err_state;
return chan;
err_state:
debugfs_remove_recursive(chan);
return NULL;
}
static void pxad_init_debugfs(struct pxad_device *pdev)
{
int i;
struct dentry *chandir;
pdev->dbgfs_root = debugfs_create_dir(dev_name(pdev->slave.dev), NULL);
if (IS_ERR(pdev->dbgfs_root) || !pdev->dbgfs_root)
goto err_root;
pdev->dbgfs_state = debugfs_create_file("state", 0400, pdev->dbgfs_root,
pdev, &dbg_fops_state);
if (!pdev->dbgfs_state)
goto err_state;
pdev->dbgfs_chan =
kmalloc_array(pdev->nr_chans, sizeof(*pdev->dbgfs_state),
GFP_KERNEL);
if (!pdev->dbgfs_chan)
goto err_alloc;
chandir = debugfs_create_dir("channels", pdev->dbgfs_root);
if (!chandir)
goto err_chandir;
for (i = 0; i < pdev->nr_chans; i++) {
pdev->dbgfs_chan[i] = pxad_dbg_alloc_chan(pdev, i, chandir);
if (!pdev->dbgfs_chan[i])
goto err_chans;
}
return;
err_chans:
err_chandir:
kfree(pdev->dbgfs_chan);
err_alloc:
err_state:
debugfs_remove_recursive(pdev->dbgfs_root);
err_root:
pr_err("pxad: debugfs is not available\n");
}
static void pxad_cleanup_debugfs(struct pxad_device *pdev)
{
debugfs_remove_recursive(pdev->dbgfs_root);
}
#else
static inline void pxad_init_debugfs(struct pxad_device *pdev) {}
static inline void pxad_cleanup_debugfs(struct pxad_device *pdev) {}
#endif
dmaengine: pxa_dma: add support for legacy transition In order to achieve smooth transition of pxa drivers from old legacy dma handling to new dmaengine, introduce a function to "hide" dma physical channels from dmaengine. This is temporary situation where pxa dma will be handled in 2 places : - arch/arm/plat-pxa/dma.c - drivers/dma/pxa_dma.c The resources, ie. dma channels, will be controlled by pxa_dma. The legacy code will request or release a channel with pxad_toggle_reserved_channel(). This is not very pretty, but it ensures both legacy and dmaengine consumers can live in the same kernel until the conversion is done. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:22 +03:00
/*
* In the transition phase where legacy pxa handling is done at the same time as
* mmp_dma, the DMA physical channel split between the 2 DMA providers is done
* through legacy_reserved. Legacy code reserves DMA channels by settings
* corresponding bits in legacy_reserved.
*/
static u32 legacy_reserved;
static u32 legacy_unavailable;
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
static struct pxad_phy *lookup_phy(struct pxad_chan *pchan)
{
int prio, i;
struct pxad_device *pdev = to_pxad_dev(pchan->vc.chan.device);
struct pxad_phy *phy, *found = NULL;
unsigned long flags;
/*
* dma channel priorities
* ch 0 - 3, 16 - 19 <--> (0)
* ch 4 - 7, 20 - 23 <--> (1)
* ch 8 - 11, 24 - 27 <--> (2)
* ch 12 - 15, 28 - 31 <--> (3)
*/
spin_lock_irqsave(&pdev->phy_lock, flags);
for (prio = pchan->prio; prio >= PXAD_PRIO_HIGHEST; prio--) {
for (i = 0; i < pdev->nr_chans; i++) {
if (prio != (i & 0xf) >> 2)
continue;
dmaengine: pxa_dma: add support for legacy transition In order to achieve smooth transition of pxa drivers from old legacy dma handling to new dmaengine, introduce a function to "hide" dma physical channels from dmaengine. This is temporary situation where pxa dma will be handled in 2 places : - arch/arm/plat-pxa/dma.c - drivers/dma/pxa_dma.c The resources, ie. dma channels, will be controlled by pxa_dma. The legacy code will request or release a channel with pxad_toggle_reserved_channel(). This is not very pretty, but it ensures both legacy and dmaengine consumers can live in the same kernel until the conversion is done. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:22 +03:00
if ((i < 32) && (legacy_reserved & BIT(i)))
continue;
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
phy = &pdev->phys[i];
if (!phy->vchan) {
phy->vchan = pchan;
found = phy;
dmaengine: pxa_dma: add support for legacy transition In order to achieve smooth transition of pxa drivers from old legacy dma handling to new dmaengine, introduce a function to "hide" dma physical channels from dmaengine. This is temporary situation where pxa dma will be handled in 2 places : - arch/arm/plat-pxa/dma.c - drivers/dma/pxa_dma.c The resources, ie. dma channels, will be controlled by pxa_dma. The legacy code will request or release a channel with pxad_toggle_reserved_channel(). This is not very pretty, but it ensures both legacy and dmaengine consumers can live in the same kernel until the conversion is done. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:22 +03:00
if (i < 32)
legacy_unavailable |= BIT(i);
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
goto out_unlock;
}
}
}
out_unlock:
spin_unlock_irqrestore(&pdev->phy_lock, flags);
dev_dbg(&pchan->vc.chan.dev->device,
"%s(): phy=%p(%d)\n", __func__, found,
found ? found->idx : -1);
return found;
}
static void pxad_free_phy(struct pxad_chan *chan)
{
struct pxad_device *pdev = to_pxad_dev(chan->vc.chan.device);
unsigned long flags;
u32 reg;
dmaengine: pxa_dma: add support for legacy transition In order to achieve smooth transition of pxa drivers from old legacy dma handling to new dmaengine, introduce a function to "hide" dma physical channels from dmaengine. This is temporary situation where pxa dma will be handled in 2 places : - arch/arm/plat-pxa/dma.c - drivers/dma/pxa_dma.c The resources, ie. dma channels, will be controlled by pxa_dma. The legacy code will request or release a channel with pxad_toggle_reserved_channel(). This is not very pretty, but it ensures both legacy and dmaengine consumers can live in the same kernel until the conversion is done. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:22 +03:00
int i;
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
dev_dbg(&chan->vc.chan.dev->device,
"%s(): freeing\n", __func__);
if (!chan->phy)
return;
/* clear the channel mapping in DRCMR */
dmaengine: pxa_dma: fix the maximum requestor line The current number of requestor lines is limited to 31. This was an error of a previous commit, as this number is platform dependent, and is actually : - for pxa25x: 40 requestor lines - for pxa27x: 75 requestor lines - for pxa3xx: 100 requestor lines The previous testing did not reveal the faulty constant as on pxa[23]xx platforms, only camera, MSL and USB are above requestor 32, and in these only the camera has a driver using dma. Fixes: e87ffbdf0697 ("dmaengine: pxa_dma: fix the no-requestor case") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Vinod Koul <vinod.koul@intel.com>
2016-02-15 23:57:48 +03:00
if (chan->drcmr <= pdev->nr_requestors) {
dmaengine: pxa_dma: fix the no-requestor case A very small number of devices don't use the flow control offered by requestor lines. In these specific cases, the pxa dma driver should be aware of that and not try to use a requestor line. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-30 20:42:14 +03:00
reg = pxad_drcmr(chan->drcmr);
writel_relaxed(0, chan->phy->base + reg);
}
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
spin_lock_irqsave(&pdev->phy_lock, flags);
dmaengine: pxa_dma: add support for legacy transition In order to achieve smooth transition of pxa drivers from old legacy dma handling to new dmaengine, introduce a function to "hide" dma physical channels from dmaengine. This is temporary situation where pxa dma will be handled in 2 places : - arch/arm/plat-pxa/dma.c - drivers/dma/pxa_dma.c The resources, ie. dma channels, will be controlled by pxa_dma. The legacy code will request or release a channel with pxad_toggle_reserved_channel(). This is not very pretty, but it ensures both legacy and dmaengine consumers can live in the same kernel until the conversion is done. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:22 +03:00
for (i = 0; i < 32; i++)
if (chan->phy == &pdev->phys[i])
legacy_unavailable &= ~BIT(i);
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
chan->phy->vchan = NULL;
chan->phy = NULL;
spin_unlock_irqrestore(&pdev->phy_lock, flags);
}
static bool is_chan_running(struct pxad_chan *chan)
{
u32 dcsr;
struct pxad_phy *phy = chan->phy;
if (!phy)
return false;
dcsr = phy_readl_relaxed(phy, DCSR);
return dcsr & PXA_DCSR_RUN;
}
static bool is_running_chan_misaligned(struct pxad_chan *chan)
{
u32 dalgn;
BUG_ON(!chan->phy);
dalgn = phy_readl_relaxed(chan->phy, DALGN);
return dalgn & (BIT(chan->phy->idx));
}
static void phy_enable(struct pxad_phy *phy, bool misaligned)
{
dmaengine: pxa_dma: fix the maximum requestor line The current number of requestor lines is limited to 31. This was an error of a previous commit, as this number is platform dependent, and is actually : - for pxa25x: 40 requestor lines - for pxa27x: 75 requestor lines - for pxa3xx: 100 requestor lines The previous testing did not reveal the faulty constant as on pxa[23]xx platforms, only camera, MSL and USB are above requestor 32, and in these only the camera has a driver using dma. Fixes: e87ffbdf0697 ("dmaengine: pxa_dma: fix the no-requestor case") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Vinod Koul <vinod.koul@intel.com>
2016-02-15 23:57:48 +03:00
struct pxad_device *pdev;
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
u32 reg, dalgn;
if (!phy->vchan)
return;
dev_dbg(&phy->vchan->vc.chan.dev->device,
"%s(); phy=%p(%d) misaligned=%d\n", __func__,
phy, phy->idx, misaligned);
dmaengine: pxa_dma: fix the maximum requestor line The current number of requestor lines is limited to 31. This was an error of a previous commit, as this number is platform dependent, and is actually : - for pxa25x: 40 requestor lines - for pxa27x: 75 requestor lines - for pxa3xx: 100 requestor lines The previous testing did not reveal the faulty constant as on pxa[23]xx platforms, only camera, MSL and USB are above requestor 32, and in these only the camera has a driver using dma. Fixes: e87ffbdf0697 ("dmaengine: pxa_dma: fix the no-requestor case") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Vinod Koul <vinod.koul@intel.com>
2016-02-15 23:57:48 +03:00
pdev = to_pxad_dev(phy->vchan->vc.chan.device);
if (phy->vchan->drcmr <= pdev->nr_requestors) {
dmaengine: pxa_dma: fix the no-requestor case A very small number of devices don't use the flow control offered by requestor lines. In these specific cases, the pxa dma driver should be aware of that and not try to use a requestor line. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-30 20:42:14 +03:00
reg = pxad_drcmr(phy->vchan->drcmr);
writel_relaxed(DRCMR_MAPVLD | phy->idx, phy->base + reg);
}
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
dalgn = phy_readl_relaxed(phy, DALGN);
if (misaligned)
dalgn |= BIT(phy->idx);
else
dalgn &= ~BIT(phy->idx);
phy_writel_relaxed(phy, dalgn, DALGN);
phy_writel(phy, PXA_DCSR_STOPIRQEN | PXA_DCSR_ENDINTR |
PXA_DCSR_BUSERR | PXA_DCSR_RUN, DCSR);
}
static void phy_disable(struct pxad_phy *phy)
{
u32 dcsr;
if (!phy)
return;
dcsr = phy_readl_relaxed(phy, DCSR);
dev_dbg(&phy->vchan->vc.chan.dev->device,
"%s(): phy=%p(%d)\n", __func__, phy, phy->idx);
phy_writel(phy, dcsr & ~PXA_DCSR_RUN & ~PXA_DCSR_STOPIRQEN, DCSR);
}
static void pxad_launch_chan(struct pxad_chan *chan,
struct pxad_desc_sw *desc)
{
dev_dbg(&chan->vc.chan.dev->device,
"%s(): desc=%p\n", __func__, desc);
if (!chan->phy) {
chan->phy = lookup_phy(chan);
if (!chan->phy) {
dev_dbg(&chan->vc.chan.dev->device,
"%s(): no free dma channel\n", __func__);
return;
}
}
dmaengine: pxa: handle bus errors In the current state, upon bus error the driver will spin endlessly, relaunching the last tx, which will fail again and again : - a bus error happens - pxad_chan_handler() is called - as PXA_DCSR_STOPSTATE is true, the last non-terminated transaction is lauched, which is the one triggering the bus error, as it didn't terminate - moreover, the STOP interrupt fires a new, as the STOPIRQEN is still active Break this logic by stopping the automatic relaunch of a dma channel upon a bus error, even if there are still pending issued requests on it. As dma_cookie_status() seems unable to return DMA_ERROR in its current form, ie. there seems no way to mark a DMA_ERROR on a per-async-tx basis, it is chosen in this patch to remember on the channel which transaction failed, and report it in pxad_tx_status(). It's a bit misleading because if T1, T2, T3 and T4 were queued, and T1 was completed while T2 causes a bus error, the status of T3 and T4 will be reported as DMA_IN_PROGRESS, while the channel is actually stopped. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-03-29 00:32:24 +03:00
chan->bus_error = 0;
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
/*
* Program the descriptor's address into the DMA controller,
* then start the DMA transaction
*/
phy_writel(chan->phy, desc->first, DDADR);
phy_enable(chan->phy, chan->misaligned);
dmaengine: pxa_dma: implement device_synchronize Implement the function which wait until a dma channel is stopped to have a synchronization point. This also protects the pxad_remove() from races, such as spurious interrupts while removing the driver, because : - as long as there is one dma channel requested, ie. dma_chan_get() but no dma_chan_put(), the try_module_get() of dma_chan_get() prevents the remove() routine from running - when the last channel is released, ie. the last dma_chan_put() is called, if there is a running DMA, pxad_synchronize() is called - pxad_synchronize() waits for the channel to stop, which in turn ensures on pxa architecture that the interrupt cannot be fired anymore Reported-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-11 00:50:49 +03:00
wake_up(&chan->wq_state);
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
}
static void set_updater_desc(struct pxad_desc_sw *sw_desc,
unsigned long flags)
{
struct pxad_desc_hw *updater =
sw_desc->hw_desc[sw_desc->nb_desc - 1];
dma_addr_t dma = sw_desc->hw_desc[sw_desc->nb_desc - 2]->ddadr;
updater->ddadr = DDADR_STOP;
updater->dsadr = dma;
updater->dtadr = dma + 8;
updater->dcmd = PXA_DCMD_WIDTH4 | PXA_DCMD_BURST32 |
(PXA_DCMD_LENGTH & sizeof(u32));
if (flags & DMA_PREP_INTERRUPT)
updater->dcmd |= PXA_DCMD_ENDIRQEN;
dmaengine: pxa_dma: fix cyclic transfers While testing audio with pxa2xx-ac97, underrun were happening while the user application was correctly feeding the music. Debug proved that the cyclic transfer is not cyclic, ie. the last descriptor did not loop on the first. Another issue is that the descriptor length was always set to 8192, because of an trivial operator issue. This was tested on a pxa27x platform. Fixes: a57e16cf0333 ("dmaengine: pxa: add pxa dmaengine driver") Reported-by: Vasily Khoruzhick <anarsoul@gmail.com> Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-02-17 00:54:02 +03:00
if (sw_desc->cyclic)
sw_desc->hw_desc[sw_desc->nb_desc - 2]->ddadr = sw_desc->first;
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
}
static bool is_desc_completed(struct virt_dma_desc *vd)
{
struct pxad_desc_sw *sw_desc = to_pxad_sw_desc(vd);
struct pxad_desc_hw *updater =
sw_desc->hw_desc[sw_desc->nb_desc - 1];
return updater->dtadr != (updater->dsadr + 8);
}
static void pxad_desc_chain(struct virt_dma_desc *vd1,
struct virt_dma_desc *vd2)
{
struct pxad_desc_sw *desc1 = to_pxad_sw_desc(vd1);
struct pxad_desc_sw *desc2 = to_pxad_sw_desc(vd2);
dma_addr_t dma_to_chain;
dma_to_chain = desc2->first;
desc1->hw_desc[desc1->nb_desc - 1]->ddadr = dma_to_chain;
}
static bool pxad_try_hotchain(struct virt_dma_chan *vc,
struct virt_dma_desc *vd)
{
struct virt_dma_desc *vd_last_issued = NULL;
struct pxad_chan *chan = to_pxad_chan(&vc->chan);
/*
* Attempt to hot chain the tx if the phy is still running. This is
* considered successful only if either the channel is still running
* after the chaining, or if the chained transfer is completed after
* having been hot chained.
* A change of alignment is not allowed, and forbids hotchaining.
*/
if (is_chan_running(chan)) {
BUG_ON(list_empty(&vc->desc_issued));
if (!is_running_chan_misaligned(chan) &&
to_pxad_sw_desc(vd)->misaligned)
return false;
vd_last_issued = list_entry(vc->desc_issued.prev,
struct virt_dma_desc, node);
pxad_desc_chain(vd_last_issued, vd);
dmaengine: pxa_dma: fix hotchain corner case In the case where a descriptor is chained on a running channel, and as explained in the comment in the code 10 lines above, the success of the chaining is ensured either if : - the DMA is still running - or if the chained transfer is completed Unfortunately the transfer completness test was done on the descriptor to which the transfer was chained, and not the transfer being chained at the end, ie. hot-chained. This corner case is extremely hard to trigger, as usually the DMA chain is still running, and the first case takes care of returning success of the hot-chaining. It was seen by hot-chaining several "small transfers" to a running "big transfer", not in a real-life usecase but by testing the robustness of the driver. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-07 22:01:48 +03:00
if (is_chan_running(chan) || is_desc_completed(vd))
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
return true;
}
return false;
}
static unsigned int clear_chan_irq(struct pxad_phy *phy)
{
u32 dcsr;
u32 dint = readl(phy->base + DINT);
if (!(dint & BIT(phy->idx)))
return PXA_DCSR_RUN;
/* clear irq */
dcsr = phy_readl_relaxed(phy, DCSR);
phy_writel(phy, dcsr, DCSR);
if ((dcsr & PXA_DCSR_BUSERR) && (phy->vchan))
dev_warn(&phy->vchan->vc.chan.dev->device,
"%s(chan=%p): PXA_DCSR_BUSERR\n",
__func__, &phy->vchan);
return dcsr & ~PXA_DCSR_RUN;
}
static irqreturn_t pxad_chan_handler(int irq, void *dev_id)
{
struct pxad_phy *phy = dev_id;
struct pxad_chan *chan = phy->vchan;
struct virt_dma_desc *vd, *tmp;
unsigned int dcsr;
unsigned long flags;
dmaengine: pxa: handle bus errors In the current state, upon bus error the driver will spin endlessly, relaunching the last tx, which will fail again and again : - a bus error happens - pxad_chan_handler() is called - as PXA_DCSR_STOPSTATE is true, the last non-terminated transaction is lauched, which is the one triggering the bus error, as it didn't terminate - moreover, the STOP interrupt fires a new, as the STOPIRQEN is still active Break this logic by stopping the automatic relaunch of a dma channel upon a bus error, even if there are still pending issued requests on it. As dma_cookie_status() seems unable to return DMA_ERROR in its current form, ie. there seems no way to mark a DMA_ERROR on a per-async-tx basis, it is chosen in this patch to remember on the channel which transaction failed, and report it in pxad_tx_status(). It's a bit misleading because if T1, T2, T3 and T4 were queued, and T1 was completed while T2 causes a bus error, the status of T3 and T4 will be reported as DMA_IN_PROGRESS, while the channel is actually stopped. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-03-29 00:32:24 +03:00
dma_cookie_t last_started = 0;
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
BUG_ON(!chan);
dcsr = clear_chan_irq(phy);
if (dcsr & PXA_DCSR_RUN)
return IRQ_NONE;
spin_lock_irqsave(&chan->vc.lock, flags);
list_for_each_entry_safe(vd, tmp, &chan->vc.desc_issued, node) {
dev_dbg(&chan->vc.chan.dev->device,
"%s(): checking txd %p[%x]: completed=%d\n",
__func__, vd, vd->tx.cookie, is_desc_completed(vd));
dmaengine: pxa: handle bus errors In the current state, upon bus error the driver will spin endlessly, relaunching the last tx, which will fail again and again : - a bus error happens - pxad_chan_handler() is called - as PXA_DCSR_STOPSTATE is true, the last non-terminated transaction is lauched, which is the one triggering the bus error, as it didn't terminate - moreover, the STOP interrupt fires a new, as the STOPIRQEN is still active Break this logic by stopping the automatic relaunch of a dma channel upon a bus error, even if there are still pending issued requests on it. As dma_cookie_status() seems unable to return DMA_ERROR in its current form, ie. there seems no way to mark a DMA_ERROR on a per-async-tx basis, it is chosen in this patch to remember on the channel which transaction failed, and report it in pxad_tx_status(). It's a bit misleading because if T1, T2, T3 and T4 were queued, and T1 was completed while T2 causes a bus error, the status of T3 and T4 will be reported as DMA_IN_PROGRESS, while the channel is actually stopped. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-03-29 00:32:24 +03:00
last_started = vd->tx.cookie;
dmaengine: pxa_dma: fix cyclic transfers While testing audio with pxa2xx-ac97, underrun were happening while the user application was correctly feeding the music. Debug proved that the cyclic transfer is not cyclic, ie. the last descriptor did not loop on the first. Another issue is that the descriptor length was always set to 8192, because of an trivial operator issue. This was tested on a pxa27x platform. Fixes: a57e16cf0333 ("dmaengine: pxa: add pxa dmaengine driver") Reported-by: Vasily Khoruzhick <anarsoul@gmail.com> Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-02-17 00:54:02 +03:00
if (to_pxad_sw_desc(vd)->cyclic) {
vchan_cyclic_callback(vd);
break;
}
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
if (is_desc_completed(vd)) {
list_del(&vd->node);
vchan_cookie_complete(vd);
} else {
break;
}
}
dmaengine: pxa: handle bus errors In the current state, upon bus error the driver will spin endlessly, relaunching the last tx, which will fail again and again : - a bus error happens - pxad_chan_handler() is called - as PXA_DCSR_STOPSTATE is true, the last non-terminated transaction is lauched, which is the one triggering the bus error, as it didn't terminate - moreover, the STOP interrupt fires a new, as the STOPIRQEN is still active Break this logic by stopping the automatic relaunch of a dma channel upon a bus error, even if there are still pending issued requests on it. As dma_cookie_status() seems unable to return DMA_ERROR in its current form, ie. there seems no way to mark a DMA_ERROR on a per-async-tx basis, it is chosen in this patch to remember on the channel which transaction failed, and report it in pxad_tx_status(). It's a bit misleading because if T1, T2, T3 and T4 were queued, and T1 was completed while T2 causes a bus error, the status of T3 and T4 will be reported as DMA_IN_PROGRESS, while the channel is actually stopped. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-03-29 00:32:24 +03:00
if (dcsr & PXA_DCSR_BUSERR) {
chan->bus_error = last_started;
phy_disable(phy);
}
if (!chan->bus_error && dcsr & PXA_DCSR_STOPSTATE) {
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
dev_dbg(&chan->vc.chan.dev->device,
"%s(): channel stopped, submitted_empty=%d issued_empty=%d",
__func__,
list_empty(&chan->vc.desc_submitted),
list_empty(&chan->vc.desc_issued));
phy_writel_relaxed(phy, dcsr & ~PXA_DCSR_STOPIRQEN, DCSR);
if (list_empty(&chan->vc.desc_issued)) {
chan->misaligned =
!list_empty(&chan->vc.desc_submitted);
} else {
vd = list_first_entry(&chan->vc.desc_issued,
struct virt_dma_desc, node);
pxad_launch_chan(chan, to_pxad_sw_desc(vd));
}
}
spin_unlock_irqrestore(&chan->vc.lock, flags);
dmaengine: pxa_dma: implement device_synchronize Implement the function which wait until a dma channel is stopped to have a synchronization point. This also protects the pxad_remove() from races, such as spurious interrupts while removing the driver, because : - as long as there is one dma channel requested, ie. dma_chan_get() but no dma_chan_put(), the try_module_get() of dma_chan_get() prevents the remove() routine from running - when the last channel is released, ie. the last dma_chan_put() is called, if there is a running DMA, pxad_synchronize() is called - pxad_synchronize() waits for the channel to stop, which in turn ensures on pxa architecture that the interrupt cannot be fired anymore Reported-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-11 00:50:49 +03:00
wake_up(&chan->wq_state);
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
return IRQ_HANDLED;
}
static irqreturn_t pxad_int_handler(int irq, void *dev_id)
{
struct pxad_device *pdev = dev_id;
struct pxad_phy *phy;
u32 dint = readl(pdev->base + DINT);
int i, ret = IRQ_NONE;
while (dint) {
i = __ffs(dint);
dint &= (dint - 1);
phy = &pdev->phys[i];
dmaengine: pxa_dma: add support for legacy transition In order to achieve smooth transition of pxa drivers from old legacy dma handling to new dmaengine, introduce a function to "hide" dma physical channels from dmaengine. This is temporary situation where pxa dma will be handled in 2 places : - arch/arm/plat-pxa/dma.c - drivers/dma/pxa_dma.c The resources, ie. dma channels, will be controlled by pxa_dma. The legacy code will request or release a channel with pxad_toggle_reserved_channel(). This is not very pretty, but it ensures both legacy and dmaengine consumers can live in the same kernel until the conversion is done. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:22 +03:00
if ((i < 32) && (legacy_reserved & BIT(i)))
continue;
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
if (pxad_chan_handler(irq, phy) == IRQ_HANDLED)
ret = IRQ_HANDLED;
}
return ret;
}
static int pxad_alloc_chan_resources(struct dma_chan *dchan)
{
struct pxad_chan *chan = to_pxad_chan(dchan);
struct pxad_device *pdev = to_pxad_dev(chan->vc.chan.device);
if (chan->desc_pool)
return 1;
chan->desc_pool = dma_pool_create(dma_chan_name(dchan),
pdev->slave.dev,
sizeof(struct pxad_desc_hw),
__alignof__(struct pxad_desc_hw),
0);
if (!chan->desc_pool) {
dev_err(&chan->vc.chan.dev->device,
"%s(): unable to allocate descriptor pool\n",
__func__);
return -ENOMEM;
}
return 1;
}
static void pxad_free_chan_resources(struct dma_chan *dchan)
{
struct pxad_chan *chan = to_pxad_chan(dchan);
vchan_free_chan_resources(&chan->vc);
dma_pool_destroy(chan->desc_pool);
chan->desc_pool = NULL;
}
static void pxad_free_desc(struct virt_dma_desc *vd)
{
int i;
dma_addr_t dma;
struct pxad_desc_sw *sw_desc = to_pxad_sw_desc(vd);
BUG_ON(sw_desc->nb_desc == 0);
for (i = sw_desc->nb_desc - 1; i >= 0; i--) {
if (i > 0)
dma = sw_desc->hw_desc[i - 1]->ddadr;
else
dma = sw_desc->first;
dma_pool_free(sw_desc->desc_pool,
sw_desc->hw_desc[i], dma);
}
sw_desc->nb_desc = 0;
kfree(sw_desc);
}
static struct pxad_desc_sw *
pxad_alloc_desc(struct pxad_chan *chan, unsigned int nb_hw_desc)
{
struct pxad_desc_sw *sw_desc;
dma_addr_t dma;
int i;
sw_desc = kzalloc(sizeof(*sw_desc) +
nb_hw_desc * sizeof(struct pxad_desc_hw *),
GFP_NOWAIT);
if (!sw_desc)
return NULL;
sw_desc->desc_pool = chan->desc_pool;
for (i = 0; i < nb_hw_desc; i++) {
sw_desc->hw_desc[i] = dma_pool_alloc(sw_desc->desc_pool,
GFP_NOWAIT, &dma);
if (!sw_desc->hw_desc[i]) {
dev_err(&chan->vc.chan.dev->device,
"%s(): Couldn't allocate the %dth hw_desc from dma_pool %p\n",
__func__, i, sw_desc->desc_pool);
goto err;
}
if (i == 0)
sw_desc->first = dma;
else
sw_desc->hw_desc[i - 1]->ddadr = dma;
sw_desc->nb_desc++;
}
return sw_desc;
err:
pxad_free_desc(&sw_desc->vd);
return NULL;
}
static dma_cookie_t pxad_tx_submit(struct dma_async_tx_descriptor *tx)
{
struct virt_dma_chan *vc = to_virt_chan(tx->chan);
struct pxad_chan *chan = to_pxad_chan(&vc->chan);
struct virt_dma_desc *vd_chained = NULL,
*vd = container_of(tx, struct virt_dma_desc, tx);
dma_cookie_t cookie;
unsigned long flags;
set_updater_desc(to_pxad_sw_desc(vd), tx->flags);
spin_lock_irqsave(&vc->lock, flags);
cookie = dma_cookie_assign(tx);
if (list_empty(&vc->desc_submitted) && pxad_try_hotchain(vc, vd)) {
list_move_tail(&vd->node, &vc->desc_issued);
dev_dbg(&chan->vc.chan.dev->device,
"%s(): txd %p[%x]: submitted (hot linked)\n",
__func__, vd, cookie);
goto out;
}
/*
* Fallback to placing the tx in the submitted queue
*/
if (!list_empty(&vc->desc_submitted)) {
vd_chained = list_entry(vc->desc_submitted.prev,
struct virt_dma_desc, node);
/*
* Only chain the descriptors if no new misalignment is
* introduced. If a new misalignment is chained, let the channel
* stop, and be relaunched in misalign mode from the irq
* handler.
*/
if (chan->misaligned || !to_pxad_sw_desc(vd)->misaligned)
pxad_desc_chain(vd_chained, vd);
else
vd_chained = NULL;
}
dev_dbg(&chan->vc.chan.dev->device,
"%s(): txd %p[%x]: submitted (%s linked)\n",
__func__, vd, cookie, vd_chained ? "cold" : "not");
list_move_tail(&vd->node, &vc->desc_submitted);
chan->misaligned |= to_pxad_sw_desc(vd)->misaligned;
out:
spin_unlock_irqrestore(&vc->lock, flags);
return cookie;
}
static void pxad_issue_pending(struct dma_chan *dchan)
{
struct pxad_chan *chan = to_pxad_chan(dchan);
struct virt_dma_desc *vd_first;
unsigned long flags;
spin_lock_irqsave(&chan->vc.lock, flags);
if (list_empty(&chan->vc.desc_submitted))
goto out;
vd_first = list_first_entry(&chan->vc.desc_submitted,
struct virt_dma_desc, node);
dev_dbg(&chan->vc.chan.dev->device,
"%s(): txd %p[%x]", __func__, vd_first, vd_first->tx.cookie);
vchan_issue_pending(&chan->vc);
if (!pxad_try_hotchain(&chan->vc, vd_first))
pxad_launch_chan(chan, to_pxad_sw_desc(vd_first));
out:
spin_unlock_irqrestore(&chan->vc.lock, flags);
}
static inline struct dma_async_tx_descriptor *
pxad_tx_prep(struct virt_dma_chan *vc, struct virt_dma_desc *vd,
unsigned long tx_flags)
{
struct dma_async_tx_descriptor *tx;
struct pxad_chan *chan = container_of(vc, struct pxad_chan, vc);
dmaengine: pxa_dma: fix initial list move Since the commit to have an allocated list of virtual descriptors was reverted, the pxa_dma driver is broken, as it assumes the descriptor is placed on the allocated list upon allocation. Fix the issue in pxa_dma by making an allocated virtual descriptor a singleton. Fixes: 8c8fe97b2b8a ("Revert "dmaengine: virt-dma: don't always free descriptor upon completion"") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-21 12:06:32 +03:00
INIT_LIST_HEAD(&vd->node);
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
tx = vchan_tx_prep(vc, vd, tx_flags);
tx->tx_submit = pxad_tx_submit;
dev_dbg(&chan->vc.chan.dev->device,
"%s(): vc=%p txd=%p[%x] flags=0x%lx\n", __func__,
vc, vd, vd->tx.cookie,
tx_flags);
return tx;
}
static void pxad_get_config(struct pxad_chan *chan,
enum dma_transfer_direction dir,
u32 *dcmd, u32 *dev_src, u32 *dev_dst)
{
u32 maxburst = 0, dev_addr = 0;
enum dma_slave_buswidth width = DMA_SLAVE_BUSWIDTH_UNDEFINED;
dmaengine: pxa_dma: fix the maximum requestor line The current number of requestor lines is limited to 31. This was an error of a previous commit, as this number is platform dependent, and is actually : - for pxa25x: 40 requestor lines - for pxa27x: 75 requestor lines - for pxa3xx: 100 requestor lines The previous testing did not reveal the faulty constant as on pxa[23]xx platforms, only camera, MSL and USB are above requestor 32, and in these only the camera has a driver using dma. Fixes: e87ffbdf0697 ("dmaengine: pxa_dma: fix the no-requestor case") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Vinod Koul <vinod.koul@intel.com>
2016-02-15 23:57:48 +03:00
struct pxad_device *pdev = to_pxad_dev(chan->vc.chan.device);
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
*dcmd = 0;
dmaengine: pxa_dma: don't use config direction parameter Don't use the direction passed in the configuration, and rely on each transfer's direction to prepare the transfers. This will enable future removal of direction parameter from dma_slave_config. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-11 23:16:32 +03:00
if (dir == DMA_DEV_TO_MEM) {
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
maxburst = chan->cfg.src_maxburst;
width = chan->cfg.src_addr_width;
dev_addr = chan->cfg.src_addr;
*dev_src = dev_addr;
dmaengine: pxa_dma: fix the no-requestor case A very small number of devices don't use the flow control offered by requestor lines. In these specific cases, the pxa dma driver should be aware of that and not try to use a requestor line. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-30 20:42:14 +03:00
*dcmd |= PXA_DCMD_INCTRGADDR;
dmaengine: pxa_dma: fix the maximum requestor line The current number of requestor lines is limited to 31. This was an error of a previous commit, as this number is platform dependent, and is actually : - for pxa25x: 40 requestor lines - for pxa27x: 75 requestor lines - for pxa3xx: 100 requestor lines The previous testing did not reveal the faulty constant as on pxa[23]xx platforms, only camera, MSL and USB are above requestor 32, and in these only the camera has a driver using dma. Fixes: e87ffbdf0697 ("dmaengine: pxa_dma: fix the no-requestor case") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Vinod Koul <vinod.koul@intel.com>
2016-02-15 23:57:48 +03:00
if (chan->drcmr <= pdev->nr_requestors)
dmaengine: pxa_dma: fix the no-requestor case A very small number of devices don't use the flow control offered by requestor lines. In these specific cases, the pxa dma driver should be aware of that and not try to use a requestor line. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-30 20:42:14 +03:00
*dcmd |= PXA_DCMD_FLOWSRC;
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
}
dmaengine: pxa_dma: don't use config direction parameter Don't use the direction passed in the configuration, and rely on each transfer's direction to prepare the transfers. This will enable future removal of direction parameter from dma_slave_config. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-11 23:16:32 +03:00
if (dir == DMA_MEM_TO_DEV) {
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
maxburst = chan->cfg.dst_maxburst;
width = chan->cfg.dst_addr_width;
dev_addr = chan->cfg.dst_addr;
*dev_dst = dev_addr;
dmaengine: pxa_dma: fix the no-requestor case A very small number of devices don't use the flow control offered by requestor lines. In these specific cases, the pxa dma driver should be aware of that and not try to use a requestor line. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-30 20:42:14 +03:00
*dcmd |= PXA_DCMD_INCSRCADDR;
dmaengine: pxa_dma: fix the maximum requestor line The current number of requestor lines is limited to 31. This was an error of a previous commit, as this number is platform dependent, and is actually : - for pxa25x: 40 requestor lines - for pxa27x: 75 requestor lines - for pxa3xx: 100 requestor lines The previous testing did not reveal the faulty constant as on pxa[23]xx platforms, only camera, MSL and USB are above requestor 32, and in these only the camera has a driver using dma. Fixes: e87ffbdf0697 ("dmaengine: pxa_dma: fix the no-requestor case") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Vinod Koul <vinod.koul@intel.com>
2016-02-15 23:57:48 +03:00
if (chan->drcmr <= pdev->nr_requestors)
dmaengine: pxa_dma: fix the no-requestor case A very small number of devices don't use the flow control offered by requestor lines. In these specific cases, the pxa dma driver should be aware of that and not try to use a requestor line. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-30 20:42:14 +03:00
*dcmd |= PXA_DCMD_FLOWTRG;
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
}
dmaengine: pxa_dma: don't use config direction parameter Don't use the direction passed in the configuration, and rely on each transfer's direction to prepare the transfers. This will enable future removal of direction parameter from dma_slave_config. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-11 23:16:32 +03:00
if (dir == DMA_MEM_TO_MEM)
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
*dcmd |= PXA_DCMD_BURST32 | PXA_DCMD_INCTRGADDR |
PXA_DCMD_INCSRCADDR;
dev_dbg(&chan->vc.chan.dev->device,
"%s(): dev_addr=0x%x maxburst=%d width=%d dir=%d\n",
__func__, dev_addr, maxburst, width, dir);
if (width == DMA_SLAVE_BUSWIDTH_1_BYTE)
*dcmd |= PXA_DCMD_WIDTH1;
else if (width == DMA_SLAVE_BUSWIDTH_2_BYTES)
*dcmd |= PXA_DCMD_WIDTH2;
else if (width == DMA_SLAVE_BUSWIDTH_4_BYTES)
*dcmd |= PXA_DCMD_WIDTH4;
if (maxburst == 8)
*dcmd |= PXA_DCMD_BURST8;
else if (maxburst == 16)
*dcmd |= PXA_DCMD_BURST16;
else if (maxburst == 32)
*dcmd |= PXA_DCMD_BURST32;
/* FIXME: drivers should be ported over to use the filter
* function. Once that's done, the following two lines can
* be removed.
*/
if (chan->cfg.slave_id)
chan->drcmr = chan->cfg.slave_id;
}
static struct dma_async_tx_descriptor *
pxad_prep_memcpy(struct dma_chan *dchan,
dma_addr_t dma_dst, dma_addr_t dma_src,
size_t len, unsigned long flags)
{
struct pxad_chan *chan = to_pxad_chan(dchan);
struct pxad_desc_sw *sw_desc;
struct pxad_desc_hw *hw_desc;
u32 dcmd;
unsigned int i, nb_desc = 0;
size_t copy;
if (!dchan || !len)
return NULL;
dev_dbg(&chan->vc.chan.dev->device,
"%s(): dma_dst=0x%lx dma_src=0x%lx len=%zu flags=%lx\n",
__func__, (unsigned long)dma_dst, (unsigned long)dma_src,
len, flags);
pxad_get_config(chan, DMA_MEM_TO_MEM, &dcmd, NULL, NULL);
nb_desc = DIV_ROUND_UP(len, PDMA_MAX_DESC_BYTES);
sw_desc = pxad_alloc_desc(chan, nb_desc + 1);
if (!sw_desc)
return NULL;
sw_desc->len = len;
if (!IS_ALIGNED(dma_src, 1 << PDMA_ALIGNMENT) ||
!IS_ALIGNED(dma_dst, 1 << PDMA_ALIGNMENT))
sw_desc->misaligned = true;
i = 0;
do {
hw_desc = sw_desc->hw_desc[i++];
copy = min_t(size_t, len, PDMA_MAX_DESC_BYTES);
hw_desc->dcmd = dcmd | (PXA_DCMD_LENGTH & copy);
hw_desc->dsadr = dma_src;
hw_desc->dtadr = dma_dst;
len -= copy;
dma_src += copy;
dma_dst += copy;
} while (len);
set_updater_desc(sw_desc, flags);
return pxad_tx_prep(&chan->vc, &sw_desc->vd, flags);
}
static struct dma_async_tx_descriptor *
pxad_prep_slave_sg(struct dma_chan *dchan, struct scatterlist *sgl,
unsigned int sg_len, enum dma_transfer_direction dir,
unsigned long flags, void *context)
{
struct pxad_chan *chan = to_pxad_chan(dchan);
struct pxad_desc_sw *sw_desc;
size_t len, avail;
struct scatterlist *sg;
dma_addr_t dma;
u32 dcmd, dsadr = 0, dtadr = 0;
unsigned int nb_desc = 0, i, j = 0;
if ((sgl == NULL) || (sg_len == 0))
return NULL;
pxad_get_config(chan, dir, &dcmd, &dsadr, &dtadr);
dev_dbg(&chan->vc.chan.dev->device,
"%s(): dir=%d flags=%lx\n", __func__, dir, flags);
for_each_sg(sgl, sg, sg_len, i)
nb_desc += DIV_ROUND_UP(sg_dma_len(sg), PDMA_MAX_DESC_BYTES);
sw_desc = pxad_alloc_desc(chan, nb_desc + 1);
if (!sw_desc)
return NULL;
for_each_sg(sgl, sg, sg_len, i) {
dma = sg_dma_address(sg);
avail = sg_dma_len(sg);
sw_desc->len += avail;
do {
len = min_t(size_t, avail, PDMA_MAX_DESC_BYTES);
if (dma & 0x7)
sw_desc->misaligned = true;
sw_desc->hw_desc[j]->dcmd =
dcmd | (PXA_DCMD_LENGTH & len);
sw_desc->hw_desc[j]->dsadr = dsadr ? dsadr : dma;
sw_desc->hw_desc[j++]->dtadr = dtadr ? dtadr : dma;
dma += len;
avail -= len;
} while (avail);
}
set_updater_desc(sw_desc, flags);
return pxad_tx_prep(&chan->vc, &sw_desc->vd, flags);
}
static struct dma_async_tx_descriptor *
pxad_prep_dma_cyclic(struct dma_chan *dchan,
dma_addr_t buf_addr, size_t len, size_t period_len,
enum dma_transfer_direction dir, unsigned long flags)
{
struct pxad_chan *chan = to_pxad_chan(dchan);
struct pxad_desc_sw *sw_desc;
struct pxad_desc_hw **phw_desc;
dma_addr_t dma;
u32 dcmd, dsadr = 0, dtadr = 0;
unsigned int nb_desc = 0;
if (!dchan || !len || !period_len)
return NULL;
if ((dir != DMA_DEV_TO_MEM) && (dir != DMA_MEM_TO_DEV)) {
dev_err(&chan->vc.chan.dev->device,
"Unsupported direction for cyclic DMA\n");
return NULL;
}
/* the buffer length must be a multiple of period_len */
if (len % period_len != 0 || period_len > PDMA_MAX_DESC_BYTES ||
!IS_ALIGNED(period_len, 1 << PDMA_ALIGNMENT))
return NULL;
pxad_get_config(chan, dir, &dcmd, &dsadr, &dtadr);
dmaengine: pxa_dma: fix cyclic transfers While testing audio with pxa2xx-ac97, underrun were happening while the user application was correctly feeding the music. Debug proved that the cyclic transfer is not cyclic, ie. the last descriptor did not loop on the first. Another issue is that the descriptor length was always set to 8192, because of an trivial operator issue. This was tested on a pxa27x platform. Fixes: a57e16cf0333 ("dmaengine: pxa: add pxa dmaengine driver") Reported-by: Vasily Khoruzhick <anarsoul@gmail.com> Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-02-17 00:54:02 +03:00
dcmd |= PXA_DCMD_ENDIRQEN | (PXA_DCMD_LENGTH & period_len);
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
dev_dbg(&chan->vc.chan.dev->device,
"%s(): buf_addr=0x%lx len=%zu period=%zu dir=%d flags=%lx\n",
__func__, (unsigned long)buf_addr, len, period_len, dir, flags);
nb_desc = DIV_ROUND_UP(period_len, PDMA_MAX_DESC_BYTES);
nb_desc *= DIV_ROUND_UP(len, period_len);
sw_desc = pxad_alloc_desc(chan, nb_desc + 1);
if (!sw_desc)
return NULL;
sw_desc->cyclic = true;
sw_desc->len = len;
phw_desc = sw_desc->hw_desc;
dma = buf_addr;
do {
phw_desc[0]->dsadr = dsadr ? dsadr : dma;
phw_desc[0]->dtadr = dtadr ? dtadr : dma;
phw_desc[0]->dcmd = dcmd;
phw_desc++;
dma += period_len;
len -= period_len;
} while (len);
set_updater_desc(sw_desc, flags);
return pxad_tx_prep(&chan->vc, &sw_desc->vd, flags);
}
static int pxad_config(struct dma_chan *dchan,
struct dma_slave_config *cfg)
{
struct pxad_chan *chan = to_pxad_chan(dchan);
if (!dchan)
return -EINVAL;
chan->cfg = *cfg;
return 0;
}
static int pxad_terminate_all(struct dma_chan *dchan)
{
struct pxad_chan *chan = to_pxad_chan(dchan);
struct pxad_device *pdev = to_pxad_dev(chan->vc.chan.device);
struct virt_dma_desc *vd = NULL;
unsigned long flags;
struct pxad_phy *phy;
LIST_HEAD(head);
dev_dbg(&chan->vc.chan.dev->device,
"%s(): vchan %p: terminate all\n", __func__, &chan->vc);
spin_lock_irqsave(&chan->vc.lock, flags);
vchan_get_all_descriptors(&chan->vc, &head);
list_for_each_entry(vd, &head, node) {
dev_dbg(&chan->vc.chan.dev->device,
"%s(): cancelling txd %p[%x] (completed=%d)", __func__,
vd, vd->tx.cookie, is_desc_completed(vd));
}
phy = chan->phy;
if (phy) {
phy_disable(chan->phy);
pxad_free_phy(chan);
chan->phy = NULL;
spin_lock(&pdev->phy_lock);
phy->vchan = NULL;
spin_unlock(&pdev->phy_lock);
}
spin_unlock_irqrestore(&chan->vc.lock, flags);
vchan_dma_desc_free_list(&chan->vc, &head);
return 0;
}
static unsigned int pxad_residue(struct pxad_chan *chan,
dma_cookie_t cookie)
{
struct virt_dma_desc *vd = NULL;
struct pxad_desc_sw *sw_desc = NULL;
struct pxad_desc_hw *hw_desc = NULL;
u32 curr, start, len, end, residue = 0;
unsigned long flags;
bool passed = false;
int i;
/*
* If the channel does not have a phy pointer anymore, it has already
* been completed. Therefore, its residue is 0.
*/
if (!chan->phy)
return 0;
spin_lock_irqsave(&chan->vc.lock, flags);
vd = vchan_find_desc(&chan->vc, cookie);
if (!vd)
goto out;
sw_desc = to_pxad_sw_desc(vd);
if (sw_desc->hw_desc[0]->dcmd & PXA_DCMD_INCSRCADDR)
curr = phy_readl_relaxed(chan->phy, DSADR);
else
curr = phy_readl_relaxed(chan->phy, DTADR);
dmaengine: pxa_dma: fix residue corner case A very tiny temporal window exists in the residue calculation where : - upon entering residue calculation, the transfer is ongoing - when reading the current transfer pointer, it just changed to the "finisher/linker" descriptor In this case, the residue returned is the whole transfer length instead of 0. Fix it. This appears almost in one extreme case, where the driver is used by older clients which inquire for residue in interrupt context, such as the smsc91x ethernet driver, in a tight loop : interrupt_handler() dmaengine_submit() do { dmaengine_tx_status() } while (residue > 0 || status != DMA_ERROR) Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-30 20:42:15 +03:00
/*
* curr has to be actually read before checking descriptor
* completion, so that a curr inside a status updater
* descriptor implies the following test returns true, and
* preventing reordering of curr load and the test.
*/
rmb();
if (is_desc_completed(vd))
goto out;
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
for (i = 0; i < sw_desc->nb_desc - 1; i++) {
hw_desc = sw_desc->hw_desc[i];
if (sw_desc->hw_desc[0]->dcmd & PXA_DCMD_INCSRCADDR)
start = hw_desc->dsadr;
else
start = hw_desc->dtadr;
len = hw_desc->dcmd & PXA_DCMD_LENGTH;
end = start + len;
/*
* 'passed' will be latched once we found the descriptor
* which lies inside the boundaries of the curr
* pointer. All descriptors that occur in the list
* _after_ we found that partially handled descriptor
* are still to be processed and are hence added to the
* residual bytes counter.
*/
if (passed) {
residue += len;
} else if (curr >= start && curr <= end) {
residue += end - curr;
passed = true;
}
}
if (!passed)
residue = sw_desc->len;
out:
spin_unlock_irqrestore(&chan->vc.lock, flags);
dev_dbg(&chan->vc.chan.dev->device,
"%s(): txd %p[%x] sw_desc=%p: %d\n",
__func__, vd, cookie, sw_desc, residue);
return residue;
}
static enum dma_status pxad_tx_status(struct dma_chan *dchan,
dma_cookie_t cookie,
struct dma_tx_state *txstate)
{
struct pxad_chan *chan = to_pxad_chan(dchan);
enum dma_status ret;
dmaengine: pxa: handle bus errors In the current state, upon bus error the driver will spin endlessly, relaunching the last tx, which will fail again and again : - a bus error happens - pxad_chan_handler() is called - as PXA_DCSR_STOPSTATE is true, the last non-terminated transaction is lauched, which is the one triggering the bus error, as it didn't terminate - moreover, the STOP interrupt fires a new, as the STOPIRQEN is still active Break this logic by stopping the automatic relaunch of a dma channel upon a bus error, even if there are still pending issued requests on it. As dma_cookie_status() seems unable to return DMA_ERROR in its current form, ie. there seems no way to mark a DMA_ERROR on a per-async-tx basis, it is chosen in this patch to remember on the channel which transaction failed, and report it in pxad_tx_status(). It's a bit misleading because if T1, T2, T3 and T4 were queued, and T1 was completed while T2 causes a bus error, the status of T3 and T4 will be reported as DMA_IN_PROGRESS, while the channel is actually stopped. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-03-29 00:32:24 +03:00
if (cookie == chan->bus_error)
return DMA_ERROR;
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
ret = dma_cookie_status(dchan, cookie, txstate);
if (likely(txstate && (ret != DMA_ERROR)))
dma_set_residue(txstate, pxad_residue(chan, cookie));
return ret;
}
dmaengine: pxa_dma: implement device_synchronize Implement the function which wait until a dma channel is stopped to have a synchronization point. This also protects the pxad_remove() from races, such as spurious interrupts while removing the driver, because : - as long as there is one dma channel requested, ie. dma_chan_get() but no dma_chan_put(), the try_module_get() of dma_chan_get() prevents the remove() routine from running - when the last channel is released, ie. the last dma_chan_put() is called, if there is a running DMA, pxad_synchronize() is called - pxad_synchronize() waits for the channel to stop, which in turn ensures on pxa architecture that the interrupt cannot be fired anymore Reported-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-11 00:50:49 +03:00
static void pxad_synchronize(struct dma_chan *dchan)
{
struct pxad_chan *chan = to_pxad_chan(dchan);
wait_event(chan->wq_state, !is_chan_running(chan));
vchan_synchronize(&chan->vc);
}
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
static void pxad_free_channels(struct dma_device *dmadev)
{
struct pxad_chan *c, *cn;
list_for_each_entry_safe(c, cn, &dmadev->channels,
vc.chan.device_node) {
list_del(&c->vc.chan.device_node);
tasklet_kill(&c->vc.task);
}
}
static int pxad_remove(struct platform_device *op)
{
struct pxad_device *pdev = platform_get_drvdata(op);
dmaengine: pxa_dma: add debug information Reuse the debugging features which were available in pxa architecture. This is a copy of the code from arch/arm/plat-pxa/dma, which is doomed to disappear once the conversion is completed towards dmaengine. This is a transfer of the commit "[ARM] pxa/dma: add debugfs entries" (d294948c2ce4e1c85f452154469752cc9b8e876d). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:21 +03:00
pxad_cleanup_debugfs(pdev);
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
pxad_free_channels(&pdev->slave);
dma_async_device_unregister(&pdev->slave);
return 0;
}
static int pxad_init_phys(struct platform_device *op,
struct pxad_device *pdev,
unsigned int nb_phy_chans)
{
int irq0, irq, nr_irq = 0, i, ret;
struct pxad_phy *phy;
irq0 = platform_get_irq(op, 0);
if (irq0 < 0)
return irq0;
pdev->phys = devm_kcalloc(&op->dev, nb_phy_chans,
sizeof(pdev->phys[0]), GFP_KERNEL);
if (!pdev->phys)
return -ENOMEM;
for (i = 0; i < nb_phy_chans; i++)
if (platform_get_irq(op, i) > 0)
nr_irq++;
for (i = 0; i < nb_phy_chans; i++) {
phy = &pdev->phys[i];
phy->base = pdev->base;
phy->idx = i;
irq = platform_get_irq(op, i);
if ((nr_irq > 1) && (irq > 0))
ret = devm_request_irq(&op->dev, irq,
pxad_chan_handler,
IRQF_SHARED, "pxa-dma", phy);
if ((nr_irq == 1) && (i == 0))
ret = devm_request_irq(&op->dev, irq0,
pxad_int_handler,
IRQF_SHARED, "pxa-dma", pdev);
if (ret) {
dev_err(pdev->slave.dev,
"%s(): can't request irq %d:%d\n", __func__,
irq, ret);
return ret;
}
}
return 0;
}
dmaengine: pxa_dma: remove duplicate const qualifier Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-25 12:47:56 +03:00
static const struct of_device_id pxad_dt_ids[] = {
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
{ .compatible = "marvell,pdma-1.0", },
{}
};
MODULE_DEVICE_TABLE(of, pxad_dt_ids);
static struct dma_chan *pxad_dma_xlate(struct of_phandle_args *dma_spec,
struct of_dma *ofdma)
{
struct pxad_device *d = ofdma->of_dma_data;
struct dma_chan *chan;
chan = dma_get_any_slave_channel(&d->slave);
if (!chan)
return NULL;
to_pxad_chan(chan)->drcmr = dma_spec->args[0];
to_pxad_chan(chan)->prio = dma_spec->args[1];
return chan;
}
static int pxad_init_dmadev(struct platform_device *op,
struct pxad_device *pdev,
dmaengine: pxa_dma: fix the maximum requestor line The current number of requestor lines is limited to 31. This was an error of a previous commit, as this number is platform dependent, and is actually : - for pxa25x: 40 requestor lines - for pxa27x: 75 requestor lines - for pxa3xx: 100 requestor lines The previous testing did not reveal the faulty constant as on pxa[23]xx platforms, only camera, MSL and USB are above requestor 32, and in these only the camera has a driver using dma. Fixes: e87ffbdf0697 ("dmaengine: pxa_dma: fix the no-requestor case") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Vinod Koul <vinod.koul@intel.com>
2016-02-15 23:57:48 +03:00
unsigned int nr_phy_chans,
unsigned int nr_requestors)
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
{
int ret;
unsigned int i;
struct pxad_chan *c;
pdev->nr_chans = nr_phy_chans;
dmaengine: pxa_dma: fix the maximum requestor line The current number of requestor lines is limited to 31. This was an error of a previous commit, as this number is platform dependent, and is actually : - for pxa25x: 40 requestor lines - for pxa27x: 75 requestor lines - for pxa3xx: 100 requestor lines The previous testing did not reveal the faulty constant as on pxa[23]xx platforms, only camera, MSL and USB are above requestor 32, and in these only the camera has a driver using dma. Fixes: e87ffbdf0697 ("dmaengine: pxa_dma: fix the no-requestor case") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Vinod Koul <vinod.koul@intel.com>
2016-02-15 23:57:48 +03:00
pdev->nr_requestors = nr_requestors;
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
INIT_LIST_HEAD(&pdev->slave.channels);
pdev->slave.device_alloc_chan_resources = pxad_alloc_chan_resources;
pdev->slave.device_free_chan_resources = pxad_free_chan_resources;
pdev->slave.device_tx_status = pxad_tx_status;
pdev->slave.device_issue_pending = pxad_issue_pending;
pdev->slave.device_config = pxad_config;
dmaengine: pxa_dma: implement device_synchronize Implement the function which wait until a dma channel is stopped to have a synchronization point. This also protects the pxad_remove() from races, such as spurious interrupts while removing the driver, because : - as long as there is one dma channel requested, ie. dma_chan_get() but no dma_chan_put(), the try_module_get() of dma_chan_get() prevents the remove() routine from running - when the last channel is released, ie. the last dma_chan_put() is called, if there is a running DMA, pxad_synchronize() is called - pxad_synchronize() waits for the channel to stop, which in turn ensures on pxa architecture that the interrupt cannot be fired anymore Reported-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-11 00:50:49 +03:00
pdev->slave.device_synchronize = pxad_synchronize;
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
pdev->slave.device_terminate_all = pxad_terminate_all;
if (op->dev.coherent_dma_mask)
dma_set_mask(&op->dev, op->dev.coherent_dma_mask);
else
dma_set_mask(&op->dev, DMA_BIT_MASK(32));
ret = pxad_init_phys(op, pdev, nr_phy_chans);
if (ret)
return ret;
for (i = 0; i < nr_phy_chans; i++) {
c = devm_kzalloc(&op->dev, sizeof(*c), GFP_KERNEL);
if (!c)
return -ENOMEM;
c->vc.desc_free = pxad_free_desc;
vchan_init(&c->vc, &pdev->slave);
dmaengine: pxa_dma: implement device_synchronize Implement the function which wait until a dma channel is stopped to have a synchronization point. This also protects the pxad_remove() from races, such as spurious interrupts while removing the driver, because : - as long as there is one dma channel requested, ie. dma_chan_get() but no dma_chan_put(), the try_module_get() of dma_chan_get() prevents the remove() routine from running - when the last channel is released, ie. the last dma_chan_put() is called, if there is a running DMA, pxad_synchronize() is called - pxad_synchronize() waits for the channel to stop, which in turn ensures on pxa architecture that the interrupt cannot be fired anymore Reported-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-11 00:50:49 +03:00
init_waitqueue_head(&c->wq_state);
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
}
return dma_async_device_register(&pdev->slave);
}
static int pxad_probe(struct platform_device *op)
{
struct pxad_device *pdev;
const struct of_device_id *of_id;
struct mmp_dma_platdata *pdata = dev_get_platdata(&op->dev);
struct resource *iores;
dmaengine: pxa_dma: fix the maximum requestor line The current number of requestor lines is limited to 31. This was an error of a previous commit, as this number is platform dependent, and is actually : - for pxa25x: 40 requestor lines - for pxa27x: 75 requestor lines - for pxa3xx: 100 requestor lines The previous testing did not reveal the faulty constant as on pxa[23]xx platforms, only camera, MSL and USB are above requestor 32, and in these only the camera has a driver using dma. Fixes: e87ffbdf0697 ("dmaengine: pxa_dma: fix the no-requestor case") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Vinod Koul <vinod.koul@intel.com>
2016-02-15 23:57:48 +03:00
int ret, dma_channels = 0, nb_requestors = 0;
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
const enum dma_slave_buswidth widths =
DMA_SLAVE_BUSWIDTH_1_BYTE | DMA_SLAVE_BUSWIDTH_2_BYTES |
DMA_SLAVE_BUSWIDTH_4_BYTES;
pdev = devm_kzalloc(&op->dev, sizeof(*pdev), GFP_KERNEL);
if (!pdev)
return -ENOMEM;
spin_lock_init(&pdev->phy_lock);
iores = platform_get_resource(op, IORESOURCE_MEM, 0);
pdev->base = devm_ioremap_resource(&op->dev, iores);
if (IS_ERR(pdev->base))
return PTR_ERR(pdev->base);
of_id = of_match_device(pxad_dt_ids, &op->dev);
dmaengine: pxa_dma: fix the maximum requestor line The current number of requestor lines is limited to 31. This was an error of a previous commit, as this number is platform dependent, and is actually : - for pxa25x: 40 requestor lines - for pxa27x: 75 requestor lines - for pxa3xx: 100 requestor lines The previous testing did not reveal the faulty constant as on pxa[23]xx platforms, only camera, MSL and USB are above requestor 32, and in these only the camera has a driver using dma. Fixes: e87ffbdf0697 ("dmaengine: pxa_dma: fix the no-requestor case") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Vinod Koul <vinod.koul@intel.com>
2016-02-15 23:57:48 +03:00
if (of_id) {
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
of_property_read_u32(op->dev.of_node, "#dma-channels",
&dma_channels);
dmaengine: pxa_dma: fix the maximum requestor line The current number of requestor lines is limited to 31. This was an error of a previous commit, as this number is platform dependent, and is actually : - for pxa25x: 40 requestor lines - for pxa27x: 75 requestor lines - for pxa3xx: 100 requestor lines The previous testing did not reveal the faulty constant as on pxa[23]xx platforms, only camera, MSL and USB are above requestor 32, and in these only the camera has a driver using dma. Fixes: e87ffbdf0697 ("dmaengine: pxa_dma: fix the no-requestor case") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Vinod Koul <vinod.koul@intel.com>
2016-02-15 23:57:48 +03:00
ret = of_property_read_u32(op->dev.of_node, "#dma-requests",
&nb_requestors);
if (ret) {
dev_warn(pdev->slave.dev,
"#dma-requests set to default 32 as missing in OF: %d",
ret);
nb_requestors = 32;
};
} else if (pdata && pdata->dma_channels) {
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
dma_channels = pdata->dma_channels;
dmaengine: pxa_dma: fix the maximum requestor line The current number of requestor lines is limited to 31. This was an error of a previous commit, as this number is platform dependent, and is actually : - for pxa25x: 40 requestor lines - for pxa27x: 75 requestor lines - for pxa3xx: 100 requestor lines The previous testing did not reveal the faulty constant as on pxa[23]xx platforms, only camera, MSL and USB are above requestor 32, and in these only the camera has a driver using dma. Fixes: e87ffbdf0697 ("dmaengine: pxa_dma: fix the no-requestor case") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Vinod Koul <vinod.koul@intel.com>
2016-02-15 23:57:48 +03:00
nb_requestors = pdata->nb_requestors;
} else {
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
dma_channels = 32; /* default 32 channel */
dmaengine: pxa_dma: fix the maximum requestor line The current number of requestor lines is limited to 31. This was an error of a previous commit, as this number is platform dependent, and is actually : - for pxa25x: 40 requestor lines - for pxa27x: 75 requestor lines - for pxa3xx: 100 requestor lines The previous testing did not reveal the faulty constant as on pxa[23]xx platforms, only camera, MSL and USB are above requestor 32, and in these only the camera has a driver using dma. Fixes: e87ffbdf0697 ("dmaengine: pxa_dma: fix the no-requestor case") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Vinod Koul <vinod.koul@intel.com>
2016-02-15 23:57:48 +03:00
}
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
dma_cap_set(DMA_SLAVE, pdev->slave.cap_mask);
dma_cap_set(DMA_MEMCPY, pdev->slave.cap_mask);
dma_cap_set(DMA_CYCLIC, pdev->slave.cap_mask);
dma_cap_set(DMA_PRIVATE, pdev->slave.cap_mask);
pdev->slave.device_prep_dma_memcpy = pxad_prep_memcpy;
pdev->slave.device_prep_slave_sg = pxad_prep_slave_sg;
pdev->slave.device_prep_dma_cyclic = pxad_prep_dma_cyclic;
pdev->slave.copy_align = PDMA_ALIGNMENT;
pdev->slave.src_addr_widths = widths;
pdev->slave.dst_addr_widths = widths;
pdev->slave.directions = BIT(DMA_MEM_TO_DEV) | BIT(DMA_DEV_TO_MEM);
pdev->slave.residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
dmaengine: pxa_dma: declare transfer are reusable As this driver provides a mechanism to reuse transfers, declare it in its probe function. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-13 22:54:30 +03:00
pdev->slave.descriptor_reuse = true;
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
pdev->slave.dev = &op->dev;
dmaengine: pxa_dma: fix the maximum requestor line The current number of requestor lines is limited to 31. This was an error of a previous commit, as this number is platform dependent, and is actually : - for pxa25x: 40 requestor lines - for pxa27x: 75 requestor lines - for pxa3xx: 100 requestor lines The previous testing did not reveal the faulty constant as on pxa[23]xx platforms, only camera, MSL and USB are above requestor 32, and in these only the camera has a driver using dma. Fixes: e87ffbdf0697 ("dmaengine: pxa_dma: fix the no-requestor case") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Vinod Koul <vinod.koul@intel.com>
2016-02-15 23:57:48 +03:00
ret = pxad_init_dmadev(op, pdev, dma_channels, nb_requestors);
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
if (ret) {
dev_err(pdev->slave.dev, "unable to register\n");
return ret;
}
if (op->dev.of_node) {
/* Device-tree DMA controller registration */
ret = of_dma_controller_register(op->dev.of_node,
pxad_dma_xlate, pdev);
if (ret < 0) {
dev_err(pdev->slave.dev,
"of_dma_controller_register failed\n");
return ret;
}
}
platform_set_drvdata(op, pdev);
dmaengine: pxa_dma: add debug information Reuse the debugging features which were available in pxa architecture. This is a copy of the code from arch/arm/plat-pxa/dma, which is doomed to disappear once the conversion is completed towards dmaengine. This is a transfer of the commit "[ARM] pxa/dma: add debugfs entries" (d294948c2ce4e1c85f452154469752cc9b8e876d). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:21 +03:00
pxad_init_debugfs(pdev);
dmaengine: pxa_dma: fix the maximum requestor line The current number of requestor lines is limited to 31. This was an error of a previous commit, as this number is platform dependent, and is actually : - for pxa25x: 40 requestor lines - for pxa27x: 75 requestor lines - for pxa3xx: 100 requestor lines The previous testing did not reveal the faulty constant as on pxa[23]xx platforms, only camera, MSL and USB are above requestor 32, and in these only the camera has a driver using dma. Fixes: e87ffbdf0697 ("dmaengine: pxa_dma: fix the no-requestor case") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Vinod Koul <vinod.koul@intel.com>
2016-02-15 23:57:48 +03:00
dev_info(pdev->slave.dev, "initialized %d channels on %d requestors\n",
dma_channels, nb_requestors);
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
return 0;
}
static const struct platform_device_id pxad_id_table[] = {
{ "pxa-dma", },
{ },
};
static struct platform_driver pxad_driver = {
.driver = {
.name = "pxa-dma",
.of_match_table = pxad_dt_ids,
},
.id_table = pxad_id_table,
.probe = pxad_probe,
.remove = pxad_remove,
};
bool pxad_filter_fn(struct dma_chan *chan, void *param)
{
struct pxad_chan *c = to_pxad_chan(chan);
struct pxad_param *p = param;
if (chan->device->dev->driver != &pxad_driver.driver)
return false;
c->drcmr = p->drcmr;
c->prio = p->prio;
return true;
}
EXPORT_SYMBOL_GPL(pxad_filter_fn);
dmaengine: pxa_dma: add support for legacy transition In order to achieve smooth transition of pxa drivers from old legacy dma handling to new dmaengine, introduce a function to "hide" dma physical channels from dmaengine. This is temporary situation where pxa dma will be handled in 2 places : - arch/arm/plat-pxa/dma.c - drivers/dma/pxa_dma.c The resources, ie. dma channels, will be controlled by pxa_dma. The legacy code will request or release a channel with pxad_toggle_reserved_channel(). This is not very pretty, but it ensures both legacy and dmaengine consumers can live in the same kernel until the conversion is done. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:22 +03:00
int pxad_toggle_reserved_channel(int legacy_channel)
{
if (legacy_unavailable & (BIT(legacy_channel)))
return -EBUSY;
legacy_reserved ^= BIT(legacy_channel);
return 0;
}
EXPORT_SYMBOL_GPL(pxad_toggle_reserved_channel);
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
module_platform_driver(pxad_driver);
MODULE_DESCRIPTION("Marvell PXA Peripheral DMA Driver");
MODULE_AUTHOR("Robert Jarzmik <robert.jarzmik@free.fr>");
MODULE_LICENSE("GPL v2");