WSL2-Linux-Kernel/fs/gfs2/lops.c

1130 строки
28 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
* Copyright (C) 2004-2006 Red Hat, Inc. All rights reserved.
*/
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/completion.h>
#include <linux/buffer_head.h>
#include <linux/mempool.h>
#include <linux/gfs2_ondisk.h>
#include <linux/bio.h>
#include <linux/fs.h>
#include <linux/list_sort.h>
#include <linux/blkdev.h>
#include "bmap.h"
#include "dir.h"
#include "gfs2.h"
#include "incore.h"
[GFS2] assertion failure after writing to journaled file, umount This patch passes all my nasty tests that were causing the code to fail under one circumstance or another. Here is a complete summary of all changes from today's git tree, in order of appearance: 1. There are now separate variables for metadata buffer accounting. 2. Variable sd_log_num_hdrs is no longer needed, since the header accounting is taken care of by the reserve/refund sequence. 3. Fixed a tiny grammatical problem in a comment. 4. Added a new function "calc_reserved" to calculate the reserved log space. This isn't entirely necessary, but it has two benefits: First, it simplifies the gfs2_log_refund function greatly. Second, it allows for easier debugging because I could sprinkle the code with calls to this function to make sure the accounting is proper (by adding asserts and printks) at strategic point of the code. 5. In log_pull_tail there apparently was a kludge to fix up the accounting based on a "pull" parameter. The buffer accounting is now done properly, so the kludge was removed. 6. File sync operations were making a call to gfs2_log_flush that writes another journal header. Since that header was unplanned for (reserved) by the reserve/refund sequence, the free space had to be decremented so that when log_pull_tail gets called, the free space is be adjusted properly. (Did I hear you call that a kludge? well, maybe, but a lot more justifiable than the one I removed). 7. In the gfs2_log_shutdown code, it optionally syncs the log by specifying the PULL parameter to log_write_header. I'm not sure this is necessary anymore. It just seems to me there could be cases where shutdown is called while there are outstanding log buffers. 8. In the (data)buf_lo_before_commit functions, I changed some offset values from being calculated on the fly to being constants. That simplified some code and we might as well let the compiler do the calculation once rather than redoing those cycles at run time. 9. This version has my rewritten databuf_lo_add function. This version is much more like its predecessor, buf_lo_add, which makes it easier to understand. Again, this might not be necessary, but it seems as if this one works as well as the previous one, maybe even better, so I decided to leave it in. 10. In databuf_lo_before_commit, a previous data corruption problem was caused by going off the end of the buffer. The proper solution is to have the proper limit in place, rather than stopping earlier. (Thus my previous attempt to fix it is wrong). If you don't wrap the buffer, you're stopping too early and that causes more log buffer accounting problems. 11. In lops.h there are two new (previously mentioned) constants for figuring out the data offset for the journal buffers. 12. There are also two new functions, buf_limit and databuf_limit to calculate how many entries will fit in the buffer. 13. In function gfs2_meta_wipe, it needs to distinguish between pinned metadata buffers and journaled data buffers for proper journal buffer accounting. It can't use the JDATA gfs2_inode flag because it's sometimes passed the "real" inode and sometimes the "metadata inode" and the inode flags will be random bits in a metadata gfs2_inode. It needs to base its decision on which was passed in. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-06-18 23:50:20 +04:00
#include "inode.h"
#include "glock.h"
#include "glops.h"
#include "log.h"
#include "lops.h"
#include "meta_io.h"
#include "recovery.h"
#include "rgrp.h"
#include "trans.h"
#include "util.h"
#include "trace_gfs2.h"
/**
* gfs2_pin - Pin a buffer in memory
* @sdp: The superblock
* @bh: The buffer to be pinned
*
* The log lock must be held when calling this function
*/
void gfs2_pin(struct gfs2_sbd *sdp, struct buffer_head *bh)
{
struct gfs2_bufdata *bd;
BUG_ON(!current->journal_info);
clear_buffer_dirty(bh);
if (test_set_buffer_pinned(bh))
gfs2_assert_withdraw(sdp, 0);
if (!buffer_uptodate(bh))
gfs2_io_error_bh_wd(sdp, bh);
bd = bh->b_private;
/* If this buffer is in the AIL and it has already been written
* to in-place disk block, remove it from the AIL.
*/
spin_lock(&sdp->sd_ail_lock);
if (bd->bd_tr)
list_move(&bd->bd_ail_st_list, &bd->bd_tr->tr_ail2_list);
spin_unlock(&sdp->sd_ail_lock);
get_bh(bh);
atomic_inc(&sdp->sd_log_pinned);
trace_gfs2_pin(bd, 1);
}
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 12:53:19 +04:00
static bool buffer_is_rgrp(const struct gfs2_bufdata *bd)
{
return bd->bd_gl->gl_name.ln_type == LM_TYPE_RGRP;
}
static void maybe_release_space(struct gfs2_bufdata *bd)
{
struct gfs2_glock *gl = bd->bd_gl;
struct gfs2_sbd *sdp = gl->gl_name.ln_sbd;
struct gfs2_rgrpd *rgd = gfs2_glock2rgrp(gl);
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 12:53:19 +04:00
unsigned int index = bd->bd_bh->b_blocknr - gl->gl_name.ln_number;
struct gfs2_bitmap *bi = rgd->rd_bits + index;
rgrp_lock_local(rgd);
if (bi->bi_clone == NULL)
goto out;
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 12:53:19 +04:00
if (sdp->sd_args.ar_discard)
gfs2_rgrp_send_discards(sdp, rgd->rd_data0, bd->bd_bh, bi, 1, NULL);
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 12:53:19 +04:00
memcpy(bi->bi_clone + bi->bi_offset,
bd->bd_bh->b_data + bi->bi_offset, bi->bi_bytes);
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 12:53:19 +04:00
clear_bit(GBF_FULL, &bi->bi_flags);
rgd->rd_free_clone = rgd->rd_free;
BUG_ON(rgd->rd_free_clone < rgd->rd_reserved);
rgd->rd_extfail_pt = rgd->rd_free;
out:
rgrp_unlock_local(rgd);
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 12:53:19 +04:00
}
/**
* gfs2_unpin - Unpin a buffer
* @sdp: the filesystem the buffer belongs to
* @bh: The buffer to unpin
* @tr: The system transaction being flushed
*/
static void gfs2_unpin(struct gfs2_sbd *sdp, struct buffer_head *bh,
struct gfs2_trans *tr)
{
struct gfs2_bufdata *bd = bh->b_private;
BUG_ON(!buffer_uptodate(bh));
BUG_ON(!buffer_pinned(bh));
lock_buffer(bh);
mark_buffer_dirty(bh);
clear_buffer_pinned(bh);
GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme Here is an update of Bob's original rbtree patch which, in addition, also resolves the rather strange ref counting that was being done relating to the bitmap blocks. Originally we had a dual system for journaling resource groups. The metadata blocks were journaled and also the rgrp itself was added to a list. The reason for adding the rgrp to the list in the journal was so that the "repolish clones" code could be run to update the free space, and potentially send any discard requests when the log was flushed. This was done by comparing the "cloned" bitmap with what had been written back on disk during the transaction commit. Due to this, there was a requirement to hang on to the rgrps' bitmap buffers until the journal had been flushed. For that reason, there was a rather complicated set up in the ->go_lock ->go_unlock functions for rgrps involving both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference count on the buffers. However, the journal maintains a reference count on the buffers anyway, since they are being journaled as metadata buffers. So by moving the code which deals with the post-journal accounting for bitmap blocks to the metadata journaling code, we can entirely dispense with the rather strange buffer ref counting scheme and also the requirement to journal the rgrps. The net result of all this is that the ->sd_rindex_spin is left to do exactly one job, and that is to look after the rbtree or rgrps. This patch is designed to be a stepping stone towards using RCU for the rbtree of resource groups, however the reduction in the number of uses of the ->sd_rindex_spin is likely to have benefits for multi-threaded workloads, anyway. The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also be removed in future in favour of calling the functions directly where required in the code. That will allow locking of resource groups without needing to actually read them in - something that could be useful in speeding up statfs. In the mean time though it is valid to dereference ->bi_bh only when the rgrp is locked. This is basically the same rule as before, modulo the references not being valid until the following journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-08-31 12:53:19 +04:00
if (buffer_is_rgrp(bd))
maybe_release_space(bd);
spin_lock(&sdp->sd_ail_lock);
if (bd->bd_tr) {
list_del(&bd->bd_ail_st_list);
brelse(bh);
} else {
struct gfs2_glock *gl = bd->bd_gl;
list_add(&bd->bd_ail_gl_list, &gl->gl_ail_list);
atomic_inc(&gl->gl_ail_count);
}
bd->bd_tr = tr;
list_add(&bd->bd_ail_st_list, &tr->tr_ail1_list);
spin_unlock(&sdp->sd_ail_lock);
clear_bit(GLF_LFLUSH, &bd->bd_gl->gl_flags);
trace_gfs2_pin(bd, 0);
unlock_buffer(bh);
atomic_dec(&sdp->sd_log_pinned);
}
void gfs2_log_incr_head(struct gfs2_sbd *sdp)
{
BUG_ON((sdp->sd_log_flush_head == sdp->sd_log_tail) &&
(sdp->sd_log_flush_head != sdp->sd_log_head));
if (++sdp->sd_log_flush_head == sdp->sd_jdesc->jd_blocks)
sdp->sd_log_flush_head = 0;
}
u64 gfs2_log_bmap(struct gfs2_jdesc *jd, unsigned int lblock)
{
struct gfs2_journal_extent *je;
list_for_each_entry(je, &jd->extent_list, list) {
if (lblock >= je->lblock && lblock < je->lblock + je->blocks)
return je->dblock + lblock - je->lblock;
}
return -1;
}
/**
* gfs2_end_log_write_bh - end log write of pagecache data with buffers
* @sdp: The superblock
* @bvec: The bio_vec
* @error: The i/o status
*
* This finds the relevant buffers and unlocks them and sets the
* error flag according to the status of the i/o request. This is
* used when the log is writing data which has an in-place version
* that is pinned in the pagecache.
*/
static void gfs2_end_log_write_bh(struct gfs2_sbd *sdp,
struct bio_vec *bvec,
blk_status_t error)
{
struct buffer_head *bh, *next;
struct page *page = bvec->bv_page;
unsigned size;
bh = page_buffers(page);
size = bvec->bv_len;
while (bh_offset(bh) < bvec->bv_offset)
bh = bh->b_this_page;
do {
if (error)
mark_buffer_write_io_error(bh);
unlock_buffer(bh);
next = bh->b_this_page;
size -= bh->b_size;
brelse(bh);
bh = next;
} while(bh && size);
}
/**
* gfs2_end_log_write - end of i/o to the log
* @bio: The bio
*
* Each bio_vec contains either data from the pagecache or data
* relating to the log itself. Here we iterate over the bio_vec
* array, processing both kinds of data.
*
*/
static void gfs2_end_log_write(struct bio *bio)
{
struct gfs2_sbd *sdp = bio->bi_private;
struct bio_vec *bvec;
struct page *page;
struct bvec_iter_all iter_all;
if (bio->bi_status) {
if (!cmpxchg(&sdp->sd_log_error, 0, (int)bio->bi_status))
fs_err(sdp, "Error %d writing to journal, jid=%u\n",
bio->bi_status, sdp->sd_jdesc->jd_jid);
gfs2_withdraw_delayed(sdp);
/* prevent more writes to the journal */
clear_bit(SDF_JOURNAL_LIVE, &sdp->sd_flags);
wake_up(&sdp->sd_logd_waitq);
}
bio_for_each_segment_all(bvec, bio, iter_all) {
page = bvec->bv_page;
if (page_has_buffers(page))
gfs2_end_log_write_bh(sdp, bvec, bio->bi_status);
else
mempool_free(page, gfs2_page_pool);
}
bio_put(bio);
if (atomic_dec_and_test(&sdp->sd_log_in_flight))
wake_up(&sdp->sd_log_flush_wait);
}
/**
* gfs2_log_submit_bio - Submit any pending log bio
* @biop: Address of the bio pointer
* @opf: REQ_OP | op_flags
*
* Submit any pending part-built or full bio to the block device. If
* there is no pending bio, then this is a no-op.
*/
void gfs2_log_submit_bio(struct bio **biop, blk_opf_t opf)
{
struct bio *bio = *biop;
if (bio) {
struct gfs2_sbd *sdp = bio->bi_private;
atomic_inc(&sdp->sd_log_in_flight);
bio->bi_opf = opf;
submit_bio(bio);
*biop = NULL;
}
}
/**
* gfs2_log_alloc_bio - Allocate a bio
* @sdp: The super block
* @blkno: The device block number we want to write to
* @end_io: The bi_end_io callback
*
* Allocate a new bio, initialize it with the given parameters and return it.
*
* Returns: The newly allocated bio
*/
static struct bio *gfs2_log_alloc_bio(struct gfs2_sbd *sdp, u64 blkno,
bio_end_io_t *end_io)
{
struct super_block *sb = sdp->sd_vfs;
struct bio *bio = bio_alloc(sb->s_bdev, BIO_MAX_VECS, 0, GFP_NOIO);
bio->bi_iter.bi_sector = blkno << sdp->sd_fsb2bb_shift;
bio->bi_end_io = end_io;
bio->bi_private = sdp;
return bio;
}
/**
* gfs2_log_get_bio - Get cached log bio, or allocate a new one
* @sdp: The super block
* @blkno: The device block number we want to write to
* @biop: The bio to get or allocate
* @op: REQ_OP
* @end_io: The bi_end_io callback
* @flush: Always flush the current bio and allocate a new one?
*
* If there is a cached bio, then if the next block number is sequential
* with the previous one, return it, otherwise flush the bio to the
* device. If there is no cached bio, or we just flushed it, then
* allocate a new one.
*
* Returns: The bio to use for log writes
*/
static struct bio *gfs2_log_get_bio(struct gfs2_sbd *sdp, u64 blkno,
struct bio **biop, enum req_op op,
bio_end_io_t *end_io, bool flush)
{
struct bio *bio = *biop;
if (bio) {
u64 nblk;
nblk = bio_end_sector(bio);
nblk >>= sdp->sd_fsb2bb_shift;
if (blkno == nblk && !flush)
return bio;
gfs2_log_submit_bio(biop, op);
}
*biop = gfs2_log_alloc_bio(sdp, blkno, end_io);
return *biop;
}
/**
* gfs2_log_write - write to log
* @sdp: the filesystem
* @jd: The journal descriptor
* @page: the page to write
* @size: the size of the data to write
* @offset: the offset within the page
* @blkno: block number of the log entry
*
* Try and add the page segment to the current bio. If that fails,
* submit the current bio to the device and create a new one, and
* then add the page segment to that.
*/
void gfs2_log_write(struct gfs2_sbd *sdp, struct gfs2_jdesc *jd,
struct page *page, unsigned size, unsigned offset,
u64 blkno)
{
struct bio *bio;
int ret;
bio = gfs2_log_get_bio(sdp, blkno, &jd->jd_log_bio, REQ_OP_WRITE,
gfs2_end_log_write, false);
ret = bio_add_page(bio, page, size, offset);
if (ret == 0) {
bio = gfs2_log_get_bio(sdp, blkno, &jd->jd_log_bio,
REQ_OP_WRITE, gfs2_end_log_write, true);
ret = bio_add_page(bio, page, size, offset);
WARN_ON(ret == 0);
}
}
/**
* gfs2_log_write_bh - write a buffer's content to the log
* @sdp: The super block
* @bh: The buffer pointing to the in-place location
*
* This writes the content of the buffer to the next available location
* in the log. The buffer will be unlocked once the i/o to the log has
* completed.
*/
static void gfs2_log_write_bh(struct gfs2_sbd *sdp, struct buffer_head *bh)
{
u64 dblock;
dblock = gfs2_log_bmap(sdp->sd_jdesc, sdp->sd_log_flush_head);
gfs2_log_incr_head(sdp);
gfs2_log_write(sdp, sdp->sd_jdesc, bh->b_page, bh->b_size,
bh_offset(bh), dblock);
}
/**
* gfs2_log_write_page - write one block stored in a page, into the log
* @sdp: The superblock
* @page: The struct page
*
* This writes the first block-sized part of the page into the log. Note
* that the page must have been allocated from the gfs2_page_pool mempool
* and that after this has been called, ownership has been transferred and
* the page may be freed at any time.
*/
static void gfs2_log_write_page(struct gfs2_sbd *sdp, struct page *page)
{
struct super_block *sb = sdp->sd_vfs;
u64 dblock;
dblock = gfs2_log_bmap(sdp->sd_jdesc, sdp->sd_log_flush_head);
gfs2_log_incr_head(sdp);
gfs2_log_write(sdp, sdp->sd_jdesc, page, sb->s_blocksize, 0, dblock);
}
/**
* gfs2_end_log_read - end I/O callback for reads from the log
* @bio: The bio
*
* Simply unlock the pages in the bio. The main thread will wait on them and
* process them in order as necessary.
*/
static void gfs2_end_log_read(struct bio *bio)
{
struct page *page;
struct bio_vec *bvec;
struct bvec_iter_all iter_all;
We've got the following patches ready for this merge window: "gfs2: Fix loop in gfs2_rbm_find (v2)" A rework of a fix we ended up reverting in 5.0 because of an iozone performance regression. "gfs2: read journal in large chunks" and "gfs2: fix race between gfs2_freeze_func and unmount" An improved version of a commit we also ended up reverting in 5.0 because of a regression in xfstest generic/311. It turns out that the journal changes were mostly innocent and that unfreeze didn't wait for the freeze to complete, which caused the filesystem to be unmounted before it was actually idle. "gfs2: Fix occasional glock use-after-free" "gfs2: Fix iomap write page reclaim deadlock" "gfs2: Fix lru_count going negative" Fixes for various problems reported and partially fixed by Citrix engineers. Thank you very much. "gfs2: clean_journal improperly set sd_log_flush_head" Another fix from Bob. A few other minor cleanups. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJc0yjCAAoJENW/n+sDE2U6/mcP/0SREGd3FNF1+9sFwc3+yCgN 9wGbTouVSQb3I2fDo6pOJdG3mRPoJrSBbkQkulSwm8KkhoN6nolWevTUkManIQ3v 6QNe+5tUM9yqb+LibU0ToeedxWPaGH/5t23rdFPkWAUxFhpngAizwzSEvLZlCUqH KHy9LJX+8+Jsob7jniohwhV8BRwle+Ss3lK/+LHv5QTRDqvdDWN9sQdWR3R37bdz xZHHVviCnvTK7hlRjtqodz9P5gravvrtjXvuOgMxZ9/yLfH8CM+rMteGOUoLDYqz U02NtZmiQu1TESuJfNdmpYdf/QGOgkVVA7TmW01rgyZnhTDXv2h001P/TKz18OUO dbbW4AxxCbVpL7U3noXbCd1Si/BAQX9K1N1/mJ1BVHcsYBK2prsRbzdEqtNqdM7g 7o2CLauI2DL3a7upr8NEX78r9CoNAS5eH/7U2DY81p725li0gIdNzjoMh+mNcaPY bh4QH12Jp/vMqqDwzEzCJyPtEKW5wfwhdxjPoeVQmKy0baffDOSiltV82ehKmWZl ekLuhXLo1MZWjMge84bRTlHH4BfBeklQ9qlxBIKAUQEZBQY2Y/+kOyrmBVic7Js6 8W3nv6TkesmGHLvz6X7jaeMo0gsSIjXm3a1r+pLvBNUOTgYD/KKBqA9mw2ICX3lA cN1aNmyhBn1agromq29R =K5kI -----END PGP SIGNATURE----- Merge tag 'gfs2-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull GFS2 updates from Andreas Gruenbacher: "We've got the following patches ready for this merge window: - "gfs2: Fix loop in gfs2_rbm_find (v2)" A rework of a fix we ended up reverting in 5.0 because of an iozone performance regression. - "gfs2: read journal in large chunks" "gfs2: fix race between gfs2_freeze_func and unmount" An improved version of a commit we also ended up reverting in 5.0 because of a regression in xfstest generic/311. It turns out that the journal changes were mostly innocent and that unfreeze didn't wait for the freeze to complete, which caused the filesystem to be unmounted before it was actually idle. - "gfs2: Fix occasional glock use-after-free" "gfs2: Fix iomap write page reclaim deadlock" "gfs2: Fix lru_count going negative" Fixes for various problems reported and partially fixed by Citrix engineers. Thank you very much. - "gfs2: clean_journal improperly set sd_log_flush_head" Another fix from Bob. - .. and a few other minor cleanups" * tag 'gfs2-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: read journal in large chunks gfs2: Fix iomap write page reclaim deadlock gfs2: fix race between gfs2_freeze_func and unmount gfs2: Rename gfs2_trans_{add_unrevoke => remove_revoke} gfs2: Rename sd_log_le_{revoke,ordered} gfs2: Remove unnecessary extern declarations gfs2: Remove misleading comments in gfs2_evict_inode gfs2: Replace gl_revokes with a GLF flag gfs2: Fix occasional glock use-after-free gfs2: clean_journal improperly set sd_log_flush_head gfs2: Fix lru_count going negative gfs2: Fix loop in gfs2_rbm_find (v2)
2019-05-08 23:16:07 +03:00
bio_for_each_segment_all(bvec, bio, iter_all) {
page = bvec->bv_page;
if (bio->bi_status) {
int err = blk_status_to_errno(bio->bi_status);
SetPageError(page);
mapping_set_error(page->mapping, err);
}
unlock_page(page);
}
bio_put(bio);
}
/**
* gfs2_jhead_pg_srch - Look for the journal head in a given page.
* @jd: The journal descriptor
* @head: The journal head to start from
* @page: The page to look in
*
* Returns: 1 if found, 0 otherwise.
*/
static bool gfs2_jhead_pg_srch(struct gfs2_jdesc *jd,
struct gfs2_log_header_host *head,
struct page *page)
{
struct gfs2_sbd *sdp = GFS2_SB(jd->jd_inode);
treewide: Remove uninitialized_var() usage Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-03 23:09:38 +03:00
struct gfs2_log_header_host lh;
void *kaddr;
unsigned int offset;
bool ret = false;
kaddr = kmap_local_page(page);
for (offset = 0; offset < PAGE_SIZE; offset += sdp->sd_sb.sb_bsize) {
if (!__get_log_header(sdp, kaddr + offset, 0, &lh)) {
if (lh.lh_sequence >= head->lh_sequence)
*head = lh;
else {
ret = true;
break;
}
}
}
kunmap_local(kaddr);
return ret;
}
/**
* gfs2_jhead_process_page - Search/cleanup a page
* @jd: The journal descriptor
* @index: Index of the page to look into
* @head: The journal head to start from
* @done: If set, perform only cleanup, else search and set if found.
*
* Find the folio with 'index' in the journal's mapping. Search the folio for
* the journal head if requested (cleanup == false). Release refs on the
* folio so the page cache can reclaim it. We grabbed a
* reference on this folio twice, first when we did a find_or_create_page()
* to obtain the folio to add it to the bio and second when we do a
* filemap_get_folio() here to get the folio to wait on while I/O on it is being
* completed.
* This function is also used to free up a folio we might've grabbed but not
* used. Maybe we added it to a bio, but not submitted it for I/O. Or we
* submitted the I/O, but we already found the jhead so we only need to drop
* our references to the folio.
*/
static void gfs2_jhead_process_page(struct gfs2_jdesc *jd, unsigned long index,
struct gfs2_log_header_host *head,
bool *done)
{
struct folio *folio;
folio = filemap_get_folio(jd->jd_inode->i_mapping, index);
folio_wait_locked(folio);
if (folio_test_error(folio))
*done = true;
if (!*done)
*done = gfs2_jhead_pg_srch(jd, head, &folio->page);
/* filemap_get_folio() and the earlier find_or_create_page() */
folio_put_refs(folio, 2);
}
static struct bio *gfs2_chain_bio(struct bio *prev, unsigned int nr_iovecs)
{
struct bio *new;
new = bio_alloc(prev->bi_bdev, nr_iovecs, prev->bi_opf, GFP_NOIO);
bio_clone_blkg_association(new, prev);
new->bi_iter.bi_sector = bio_end_sector(prev);
bio_chain(new, prev);
submit_bio(prev);
return new;
}
/**
* gfs2_find_jhead - find the head of a log
* @jd: The journal descriptor
* @head: The log descriptor for the head of the log is returned here
* @keep_cache: If set inode pages will not be truncated
*
* Do a search of a journal by reading it in large chunks using bios and find
* the valid log entry with the highest sequence number. (i.e. the log head)
*
* Returns: 0 on success, errno otherwise
*/
int gfs2_find_jhead(struct gfs2_jdesc *jd, struct gfs2_log_header_host *head,
bool keep_cache)
{
struct gfs2_sbd *sdp = GFS2_SB(jd->jd_inode);
struct address_space *mapping = jd->jd_inode->i_mapping;
unsigned int block = 0, blocks_submitted = 0, blocks_read = 0;
unsigned int bsize = sdp->sd_sb.sb_bsize, off;
unsigned int bsize_shift = sdp->sd_sb.sb_bsize_shift;
unsigned int shift = PAGE_SHIFT - bsize_shift;
unsigned int max_blocks = 2 * 1024 * 1024 >> bsize_shift;
struct gfs2_journal_extent *je;
int sz, ret = 0;
struct bio *bio = NULL;
struct page *page = NULL;
bool done = false;
errseq_t since;
memset(head, 0, sizeof(*head));
if (list_empty(&jd->extent_list))
gfs2_map_journal_extents(sdp, jd);
since = filemap_sample_wb_err(mapping);
list_for_each_entry(je, &jd->extent_list, list) {
u64 dblock = je->dblock;
for (; block < je->lblock + je->blocks; block++, dblock++) {
if (!page) {
page = find_or_create_page(mapping,
block >> shift, GFP_NOFS);
if (!page) {
ret = -ENOMEM;
done = true;
goto out;
}
off = 0;
}
if (bio && (off || block < blocks_submitted + max_blocks)) {
sector_t sector = dblock << sdp->sd_fsb2bb_shift;
if (bio_end_sector(bio) == sector) {
sz = bio_add_page(bio, page, bsize, off);
if (sz == bsize)
goto block_added;
}
if (off) {
unsigned int blocks =
(PAGE_SIZE - off) >> bsize_shift;
bio = gfs2_chain_bio(bio, blocks);
goto add_block_to_new_bio;
}
}
if (bio) {
blocks_submitted = block;
submit_bio(bio);
}
bio = gfs2_log_alloc_bio(sdp, dblock, gfs2_end_log_read);
bio->bi_opf = REQ_OP_READ;
add_block_to_new_bio:
sz = bio_add_page(bio, page, bsize, off);
BUG_ON(sz != bsize);
block_added:
off += bsize;
if (off == PAGE_SIZE)
page = NULL;
if (blocks_submitted <= blocks_read + max_blocks) {
/* Keep at least one bio in flight */
continue;
}
gfs2_jhead_process_page(jd, blocks_read >> shift, head, &done);
blocks_read += PAGE_SIZE >> bsize_shift;
if (done)
goto out; /* found */
}
}
out:
if (bio)
submit_bio(bio);
while (blocks_read < block) {
gfs2_jhead_process_page(jd, blocks_read >> shift, head, &done);
blocks_read += PAGE_SIZE >> bsize_shift;
}
if (!ret)
ret = filemap_check_wb_err(mapping, since);
if (!keep_cache)
truncate_inode_pages(mapping, 0);
return ret;
}
static struct page *gfs2_get_log_desc(struct gfs2_sbd *sdp, u32 ld_type,
u32 ld_length, u32 ld_data1)
{
struct page *page = mempool_alloc(gfs2_page_pool, GFP_NOIO);
struct gfs2_log_descriptor *ld = page_address(page);
clear_page(ld);
ld->ld_header.mh_magic = cpu_to_be32(GFS2_MAGIC);
ld->ld_header.mh_type = cpu_to_be32(GFS2_METATYPE_LD);
ld->ld_header.mh_format = cpu_to_be32(GFS2_FORMAT_LD);
ld->ld_type = cpu_to_be32(ld_type);
ld->ld_length = cpu_to_be32(ld_length);
ld->ld_data1 = cpu_to_be32(ld_data1);
ld->ld_data2 = 0;
return page;
}
static void gfs2_check_magic(struct buffer_head *bh)
{
void *kaddr;
__be32 *ptr;
clear_buffer_escaped(bh);
kaddr = kmap_local_page(bh->b_page);
ptr = kaddr + bh_offset(bh);
if (*ptr == cpu_to_be32(GFS2_MAGIC))
set_buffer_escaped(bh);
kunmap_local(kaddr);
}
static int blocknr_cmp(void *priv, const struct list_head *a,
const struct list_head *b)
{
struct gfs2_bufdata *bda, *bdb;
bda = list_entry(a, struct gfs2_bufdata, bd_list);
bdb = list_entry(b, struct gfs2_bufdata, bd_list);
if (bda->bd_bh->b_blocknr < bdb->bd_bh->b_blocknr)
return -1;
if (bda->bd_bh->b_blocknr > bdb->bd_bh->b_blocknr)
return 1;
return 0;
}
static void gfs2_before_commit(struct gfs2_sbd *sdp, unsigned int limit,
unsigned int total, struct list_head *blist,
bool is_databuf)
{
struct gfs2_log_descriptor *ld;
struct gfs2_bufdata *bd1 = NULL, *bd2;
struct page *page;
unsigned int num;
unsigned n;
__be64 *ptr;
gfs2_log_lock(sdp);
list_sort(NULL, blist, blocknr_cmp);
bd1 = bd2 = list_prepare_entry(bd1, blist, bd_list);
while(total) {
num = total;
if (total > limit)
num = limit;
gfs2_log_unlock(sdp);
page = gfs2_get_log_desc(sdp,
is_databuf ? GFS2_LOG_DESC_JDATA :
GFS2_LOG_DESC_METADATA, num + 1, num);
ld = page_address(page);
gfs2_log_lock(sdp);
ptr = (__be64 *)(ld + 1);
n = 0;
list_for_each_entry_continue(bd1, blist, bd_list) {
*ptr++ = cpu_to_be64(bd1->bd_bh->b_blocknr);
if (is_databuf) {
gfs2_check_magic(bd1->bd_bh);
*ptr++ = cpu_to_be64(buffer_escaped(bd1->bd_bh) ? 1 : 0);
}
if (++n >= num)
break;
}
gfs2_log_unlock(sdp);
gfs2_log_write_page(sdp, page);
gfs2_log_lock(sdp);
n = 0;
list_for_each_entry_continue(bd2, blist, bd_list) {
get_bh(bd2->bd_bh);
gfs2_log_unlock(sdp);
lock_buffer(bd2->bd_bh);
if (buffer_escaped(bd2->bd_bh)) {
void *p;
page = mempool_alloc(gfs2_page_pool, GFP_NOIO);
p = page_address(page);
memcpy_from_page(p, page, bh_offset(bd2->bd_bh), bd2->bd_bh->b_size);
*(__be32 *)p = 0;
clear_buffer_escaped(bd2->bd_bh);
unlock_buffer(bd2->bd_bh);
brelse(bd2->bd_bh);
gfs2_log_write_page(sdp, page);
} else {
gfs2_log_write_bh(sdp, bd2->bd_bh);
}
gfs2_log_lock(sdp);
if (++n >= num)
break;
}
BUG_ON(total < num);
total -= num;
}
gfs2_log_unlock(sdp);
}
static void buf_lo_before_commit(struct gfs2_sbd *sdp, struct gfs2_trans *tr)
{
unsigned int limit = buf_limit(sdp); /* 503 for 4k blocks */
unsigned int nbuf;
if (tr == NULL)
return;
nbuf = tr->tr_num_buf_new - tr->tr_num_buf_rm;
gfs2_before_commit(sdp, limit, nbuf, &tr->tr_buf, 0);
}
static void buf_lo_after_commit(struct gfs2_sbd *sdp, struct gfs2_trans *tr)
{
struct list_head *head;
struct gfs2_bufdata *bd;
if (tr == NULL)
return;
head = &tr->tr_buf;
while (!list_empty(head)) {
bd = list_first_entry(head, struct gfs2_bufdata, bd_list);
list_del_init(&bd->bd_list);
gfs2_unpin(sdp, bd->bd_bh, tr);
}
}
static void buf_lo_before_scan(struct gfs2_jdesc *jd,
struct gfs2_log_header_host *head, int pass)
{
if (pass != 0)
return;
jd->jd_found_blocks = 0;
jd->jd_replayed_blocks = 0;
}
#define obsolete_rgrp_replay \
"Replaying 0x%llx from jid=%d/0x%llx but we already have a bh!\n"
#define obsolete_rgrp_replay2 \
"busy:%d, pinned:%d rg_gen:0x%llx, j_gen:0x%llx\n"
static void obsolete_rgrp(struct gfs2_jdesc *jd, struct buffer_head *bh_log,
u64 blkno)
{
struct gfs2_sbd *sdp = GFS2_SB(jd->jd_inode);
struct gfs2_rgrpd *rgd;
struct gfs2_rgrp *jrgd = (struct gfs2_rgrp *)bh_log->b_data;
rgd = gfs2_blk2rgrpd(sdp, blkno, false);
if (rgd && rgd->rd_addr == blkno &&
rgd->rd_bits && rgd->rd_bits->bi_bh) {
fs_info(sdp, obsolete_rgrp_replay, (unsigned long long)blkno,
jd->jd_jid, bh_log->b_blocknr);
fs_info(sdp, obsolete_rgrp_replay2,
buffer_busy(rgd->rd_bits->bi_bh) ? 1 : 0,
buffer_pinned(rgd->rd_bits->bi_bh),
rgd->rd_igeneration,
be64_to_cpu(jrgd->rg_igeneration));
gfs2_dump_glock(NULL, rgd->rd_gl, true);
}
}
static int buf_lo_scan_elements(struct gfs2_jdesc *jd, u32 start,
struct gfs2_log_descriptor *ld, __be64 *ptr,
int pass)
{
struct gfs2_inode *ip = GFS2_I(jd->jd_inode);
struct gfs2_sbd *sdp = GFS2_SB(jd->jd_inode);
struct gfs2_glock *gl = ip->i_gl;
unsigned int blks = be32_to_cpu(ld->ld_data1);
struct buffer_head *bh_log, *bh_ip;
u64 blkno;
int error = 0;
if (pass != 1 || be32_to_cpu(ld->ld_type) != GFS2_LOG_DESC_METADATA)
return 0;
gfs2_replay_incr_blk(jd, &start);
for (; blks; gfs2_replay_incr_blk(jd, &start), blks--) {
blkno = be64_to_cpu(*ptr++);
jd->jd_found_blocks++;
if (gfs2_revoke_check(jd, blkno, start))
continue;
error = gfs2_replay_read_block(jd, start, &bh_log);
if (error)
return error;
bh_ip = gfs2_meta_new(gl, blkno);
memcpy(bh_ip->b_data, bh_log->b_data, bh_log->b_size);
if (gfs2_meta_check(sdp, bh_ip))
error = -EIO;
gfs2: Warn when a journal replay overwrites a rgrp with buffers This patch adds some instrumentation in gfs2's journal replay that indicates when we're about to overwrite a rgrp for which we already have a valid buffer_head. When this problem occurs, it's a situation in which this node has been granted a rgrp glock and subsequently read in buffer_heads for it, and possibly even made changes to the rgrp bits and/or allocation values. But now another node has failed and forced us to replay its journal, but its journal contains a copy of the same rgrp, without a revoke, which means we're about to overwrite a rgrp that we now rightfully own, with an obsolete copy. That is always a problem. It means the other node (which failed and left its journal to be replayed) failed to flush out its rgrp buffers, write out the revoke, and invalidate its copy before it released the glock to our possession. No node should ever release a glock until its metadata has been written to the journal and revoked and invalidated.. We also kludge around the problem and refuse to replace our good copy with the journals bad copy by not marking the buffer dirty, but never do it silently. That's wallpapering over a larger problem that still exists. IOW, if this situation can happen to this node, it can also happen to a different node and we wouldn't even know it or be able to circumvent it: Suppose we have a 3-node cluster: Node 1 fails, leaving an obsolete rgrp block in its journal without a revoke. Node 2 grabs the rgrp as soon as the rgrp glock is released and starts making changes, allocating and freeing blocks from the rgrp, etc. Node 3 replays the journal from node 1, oblivious and unaware that it's about to overwrite node 2's changes. So we still need to be vocal and log the error to make it apparent that a corruption path still exists in gfs2. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-02-27 23:26:59 +03:00
else {
struct gfs2_meta_header *mh =
(struct gfs2_meta_header *)bh_ip->b_data;
if (mh->mh_type == cpu_to_be32(GFS2_METATYPE_RG))
obsolete_rgrp(jd, bh_log, blkno);
mark_buffer_dirty(bh_ip);
gfs2: Warn when a journal replay overwrites a rgrp with buffers This patch adds some instrumentation in gfs2's journal replay that indicates when we're about to overwrite a rgrp for which we already have a valid buffer_head. When this problem occurs, it's a situation in which this node has been granted a rgrp glock and subsequently read in buffer_heads for it, and possibly even made changes to the rgrp bits and/or allocation values. But now another node has failed and forced us to replay its journal, but its journal contains a copy of the same rgrp, without a revoke, which means we're about to overwrite a rgrp that we now rightfully own, with an obsolete copy. That is always a problem. It means the other node (which failed and left its journal to be replayed) failed to flush out its rgrp buffers, write out the revoke, and invalidate its copy before it released the glock to our possession. No node should ever release a glock until its metadata has been written to the journal and revoked and invalidated.. We also kludge around the problem and refuse to replace our good copy with the journals bad copy by not marking the buffer dirty, but never do it silently. That's wallpapering over a larger problem that still exists. IOW, if this situation can happen to this node, it can also happen to a different node and we wouldn't even know it or be able to circumvent it: Suppose we have a 3-node cluster: Node 1 fails, leaving an obsolete rgrp block in its journal without a revoke. Node 2 grabs the rgrp as soon as the rgrp glock is released and starts making changes, allocating and freeing blocks from the rgrp, etc. Node 3 replays the journal from node 1, oblivious and unaware that it's about to overwrite node 2's changes. So we still need to be vocal and log the error to make it apparent that a corruption path still exists in gfs2. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2019-02-27 23:26:59 +03:00
}
brelse(bh_log);
brelse(bh_ip);
if (error)
break;
jd->jd_replayed_blocks++;
}
return error;
}
static void buf_lo_after_scan(struct gfs2_jdesc *jd, int error, int pass)
{
struct gfs2_inode *ip = GFS2_I(jd->jd_inode);
struct gfs2_sbd *sdp = GFS2_SB(jd->jd_inode);
if (error) {
gfs2_inode_metasync(ip->i_gl);
return;
}
if (pass != 1)
return;
gfs2_inode_metasync(ip->i_gl);
fs_info(sdp, "jid=%u: Replayed %u of %u blocks\n",
jd->jd_jid, jd->jd_replayed_blocks, jd->jd_found_blocks);
}
static void revoke_lo_before_commit(struct gfs2_sbd *sdp, struct gfs2_trans *tr)
{
struct gfs2_meta_header *mh;
unsigned int offset;
struct list_head *head = &sdp->sd_log_revokes;
struct gfs2_bufdata *bd;
struct page *page;
unsigned int length;
gfs2_flush_revokes(sdp);
if (!sdp->sd_log_num_revoke)
return;
length = gfs2_struct2blk(sdp, sdp->sd_log_num_revoke);
page = gfs2_get_log_desc(sdp, GFS2_LOG_DESC_REVOKE, length, sdp->sd_log_num_revoke);
offset = sizeof(struct gfs2_log_descriptor);
list_for_each_entry(bd, head, bd_list) {
sdp->sd_log_num_revoke--;
if (offset + sizeof(u64) > sdp->sd_sb.sb_bsize) {
gfs2_log_write_page(sdp, page);
page = mempool_alloc(gfs2_page_pool, GFP_NOIO);
mh = page_address(page);
clear_page(mh);
mh->mh_magic = cpu_to_be32(GFS2_MAGIC);
mh->mh_type = cpu_to_be32(GFS2_METATYPE_LB);
mh->mh_format = cpu_to_be32(GFS2_FORMAT_LB);
offset = sizeof(struct gfs2_meta_header);
}
*(__be64 *)(page_address(page) + offset) = cpu_to_be64(bd->bd_blkno);
offset += sizeof(u64);
}
gfs2_assert_withdraw(sdp, !sdp->sd_log_num_revoke);
gfs2_log_write_page(sdp, page);
}
void gfs2_drain_revokes(struct gfs2_sbd *sdp)
{
struct list_head *head = &sdp->sd_log_revokes;
struct gfs2_bufdata *bd;
struct gfs2_glock *gl;
while (!list_empty(head)) {
bd = list_first_entry(head, struct gfs2_bufdata, bd_list);
list_del_init(&bd->bd_list);
gl = bd->bd_gl;
gfs2_glock_remove_revoke(gl);
kmem_cache_free(gfs2_bufdata_cachep, bd);
}
}
static void revoke_lo_after_commit(struct gfs2_sbd *sdp, struct gfs2_trans *tr)
{
gfs2_drain_revokes(sdp);
}
static void revoke_lo_before_scan(struct gfs2_jdesc *jd,
struct gfs2_log_header_host *head, int pass)
{
if (pass != 0)
return;
jd->jd_found_revokes = 0;
jd->jd_replay_tail = head->lh_tail;
}
static int revoke_lo_scan_elements(struct gfs2_jdesc *jd, u32 start,
struct gfs2_log_descriptor *ld, __be64 *ptr,
int pass)
{
struct gfs2_sbd *sdp = GFS2_SB(jd->jd_inode);
unsigned int blks = be32_to_cpu(ld->ld_length);
unsigned int revokes = be32_to_cpu(ld->ld_data1);
struct buffer_head *bh;
unsigned int offset;
u64 blkno;
int first = 1;
int error;
if (pass != 0 || be32_to_cpu(ld->ld_type) != GFS2_LOG_DESC_REVOKE)
return 0;
offset = sizeof(struct gfs2_log_descriptor);
for (; blks; gfs2_replay_incr_blk(jd, &start), blks--) {
error = gfs2_replay_read_block(jd, start, &bh);
if (error)
return error;
if (!first)
gfs2_metatype_check(sdp, bh, GFS2_METATYPE_LB);
while (offset + sizeof(u64) <= sdp->sd_sb.sb_bsize) {
blkno = be64_to_cpu(*(__be64 *)(bh->b_data + offset));
error = gfs2_revoke_add(jd, blkno, start);
if (error < 0) {
brelse(bh);
return error;
}
else if (error)
jd->jd_found_revokes++;
if (!--revokes)
break;
offset += sizeof(u64);
}
brelse(bh);
offset = sizeof(struct gfs2_meta_header);
first = 0;
}
return 0;
}
static void revoke_lo_after_scan(struct gfs2_jdesc *jd, int error, int pass)
{
struct gfs2_sbd *sdp = GFS2_SB(jd->jd_inode);
if (error) {
gfs2_revoke_clean(jd);
return;
}
if (pass != 1)
return;
fs_info(sdp, "jid=%u: Found %u revoke tags\n",
jd->jd_jid, jd->jd_found_revokes);
gfs2_revoke_clean(jd);
}
/**
* databuf_lo_before_commit - Scan the data buffers, writing as we go
* @sdp: The filesystem
* @tr: The system transaction being flushed
*/
static void databuf_lo_before_commit(struct gfs2_sbd *sdp, struct gfs2_trans *tr)
{
unsigned int limit = databuf_limit(sdp);
unsigned int nbuf;
if (tr == NULL)
return;
nbuf = tr->tr_num_databuf_new - tr->tr_num_databuf_rm;
gfs2_before_commit(sdp, limit, nbuf, &tr->tr_databuf, 1);
[GFS2] Make journaled data files identical to normal files on disk This is a very large patch, with a few still to be resolved issues so you might want to check out the previous head of the tree since this is known to be unstable. Fixes for the various bugs will be forthcoming shortly. This patch removes the special data format which has been used up till now for journaled data files. Directories still retain the old format so that they will remain on disk compatible with earlier releases. As a result you can now do the following with journaled data files: 1) mmap them 2) export them over NFS 3) convert to/from normal files whenever you want to (the zero length restriction is gone) In addition the level at which GFS' locking is done has changed for all files (since they all now use the page cache) such that the locking is done at the page cache level rather than the level of the fs operations. This should mean that things like loopback mounts and other things which touch the page cache directly should now work. Current known issues: 1. There is a lock mode inversion problem related to the resource group hold function which needs to be resolved. 2. Any significant amount of I/O causes an oops with an offset of hex 320 (NULL pointer dereference) which appears to be related to a journaled data buffer appearing on a list where it shouldn't be. 3. Direct I/O writes are disabled for the time being (will reappear later) 4. There is probably a deadlock between the page lock and GFS' locks under certain combinations of mmap and fs operation I/O. 5. Issue relating to ref counting on internally used inodes causes a hang on umount (discovered before this patch, and not fixed by it) 6. One part of the directory metadata is different from GFS1 and will need to be resolved before next release. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-08 14:50:51 +03:00
}
static int databuf_lo_scan_elements(struct gfs2_jdesc *jd, u32 start,
[GFS2] Make journaled data files identical to normal files on disk This is a very large patch, with a few still to be resolved issues so you might want to check out the previous head of the tree since this is known to be unstable. Fixes for the various bugs will be forthcoming shortly. This patch removes the special data format which has been used up till now for journaled data files. Directories still retain the old format so that they will remain on disk compatible with earlier releases. As a result you can now do the following with journaled data files: 1) mmap them 2) export them over NFS 3) convert to/from normal files whenever you want to (the zero length restriction is gone) In addition the level at which GFS' locking is done has changed for all files (since they all now use the page cache) such that the locking is done at the page cache level rather than the level of the fs operations. This should mean that things like loopback mounts and other things which touch the page cache directly should now work. Current known issues: 1. There is a lock mode inversion problem related to the resource group hold function which needs to be resolved. 2. Any significant amount of I/O causes an oops with an offset of hex 320 (NULL pointer dereference) which appears to be related to a journaled data buffer appearing on a list where it shouldn't be. 3. Direct I/O writes are disabled for the time being (will reappear later) 4. There is probably a deadlock between the page lock and GFS' locks under certain combinations of mmap and fs operation I/O. 5. Issue relating to ref counting on internally used inodes causes a hang on umount (discovered before this patch, and not fixed by it) 6. One part of the directory metadata is different from GFS1 and will need to be resolved before next release. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-08 14:50:51 +03:00
struct gfs2_log_descriptor *ld,
__be64 *ptr, int pass)
{
struct gfs2_inode *ip = GFS2_I(jd->jd_inode);
struct gfs2_glock *gl = ip->i_gl;
[GFS2] Make journaled data files identical to normal files on disk This is a very large patch, with a few still to be resolved issues so you might want to check out the previous head of the tree since this is known to be unstable. Fixes for the various bugs will be forthcoming shortly. This patch removes the special data format which has been used up till now for journaled data files. Directories still retain the old format so that they will remain on disk compatible with earlier releases. As a result you can now do the following with journaled data files: 1) mmap them 2) export them over NFS 3) convert to/from normal files whenever you want to (the zero length restriction is gone) In addition the level at which GFS' locking is done has changed for all files (since they all now use the page cache) such that the locking is done at the page cache level rather than the level of the fs operations. This should mean that things like loopback mounts and other things which touch the page cache directly should now work. Current known issues: 1. There is a lock mode inversion problem related to the resource group hold function which needs to be resolved. 2. Any significant amount of I/O causes an oops with an offset of hex 320 (NULL pointer dereference) which appears to be related to a journaled data buffer appearing on a list where it shouldn't be. 3. Direct I/O writes are disabled for the time being (will reappear later) 4. There is probably a deadlock between the page lock and GFS' locks under certain combinations of mmap and fs operation I/O. 5. Issue relating to ref counting on internally used inodes causes a hang on umount (discovered before this patch, and not fixed by it) 6. One part of the directory metadata is different from GFS1 and will need to be resolved before next release. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-08 14:50:51 +03:00
unsigned int blks = be32_to_cpu(ld->ld_data1);
struct buffer_head *bh_log, *bh_ip;
u64 blkno;
u64 esc;
[GFS2] Make journaled data files identical to normal files on disk This is a very large patch, with a few still to be resolved issues so you might want to check out the previous head of the tree since this is known to be unstable. Fixes for the various bugs will be forthcoming shortly. This patch removes the special data format which has been used up till now for journaled data files. Directories still retain the old format so that they will remain on disk compatible with earlier releases. As a result you can now do the following with journaled data files: 1) mmap them 2) export them over NFS 3) convert to/from normal files whenever you want to (the zero length restriction is gone) In addition the level at which GFS' locking is done has changed for all files (since they all now use the page cache) such that the locking is done at the page cache level rather than the level of the fs operations. This should mean that things like loopback mounts and other things which touch the page cache directly should now work. Current known issues: 1. There is a lock mode inversion problem related to the resource group hold function which needs to be resolved. 2. Any significant amount of I/O causes an oops with an offset of hex 320 (NULL pointer dereference) which appears to be related to a journaled data buffer appearing on a list where it shouldn't be. 3. Direct I/O writes are disabled for the time being (will reappear later) 4. There is probably a deadlock between the page lock and GFS' locks under certain combinations of mmap and fs operation I/O. 5. Issue relating to ref counting on internally used inodes causes a hang on umount (discovered before this patch, and not fixed by it) 6. One part of the directory metadata is different from GFS1 and will need to be resolved before next release. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-08 14:50:51 +03:00
int error = 0;
if (pass != 1 || be32_to_cpu(ld->ld_type) != GFS2_LOG_DESC_JDATA)
return 0;
gfs2_replay_incr_blk(jd, &start);
for (; blks; gfs2_replay_incr_blk(jd, &start), blks--) {
[GFS2] Make journaled data files identical to normal files on disk This is a very large patch, with a few still to be resolved issues so you might want to check out the previous head of the tree since this is known to be unstable. Fixes for the various bugs will be forthcoming shortly. This patch removes the special data format which has been used up till now for journaled data files. Directories still retain the old format so that they will remain on disk compatible with earlier releases. As a result you can now do the following with journaled data files: 1) mmap them 2) export them over NFS 3) convert to/from normal files whenever you want to (the zero length restriction is gone) In addition the level at which GFS' locking is done has changed for all files (since they all now use the page cache) such that the locking is done at the page cache level rather than the level of the fs operations. This should mean that things like loopback mounts and other things which touch the page cache directly should now work. Current known issues: 1. There is a lock mode inversion problem related to the resource group hold function which needs to be resolved. 2. Any significant amount of I/O causes an oops with an offset of hex 320 (NULL pointer dereference) which appears to be related to a journaled data buffer appearing on a list where it shouldn't be. 3. Direct I/O writes are disabled for the time being (will reappear later) 4. There is probably a deadlock between the page lock and GFS' locks under certain combinations of mmap and fs operation I/O. 5. Issue relating to ref counting on internally used inodes causes a hang on umount (discovered before this patch, and not fixed by it) 6. One part of the directory metadata is different from GFS1 and will need to be resolved before next release. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-08 14:50:51 +03:00
blkno = be64_to_cpu(*ptr++);
esc = be64_to_cpu(*ptr++);
jd->jd_found_blocks++;
[GFS2] Make journaled data files identical to normal files on disk This is a very large patch, with a few still to be resolved issues so you might want to check out the previous head of the tree since this is known to be unstable. Fixes for the various bugs will be forthcoming shortly. This patch removes the special data format which has been used up till now for journaled data files. Directories still retain the old format so that they will remain on disk compatible with earlier releases. As a result you can now do the following with journaled data files: 1) mmap them 2) export them over NFS 3) convert to/from normal files whenever you want to (the zero length restriction is gone) In addition the level at which GFS' locking is done has changed for all files (since they all now use the page cache) such that the locking is done at the page cache level rather than the level of the fs operations. This should mean that things like loopback mounts and other things which touch the page cache directly should now work. Current known issues: 1. There is a lock mode inversion problem related to the resource group hold function which needs to be resolved. 2. Any significant amount of I/O causes an oops with an offset of hex 320 (NULL pointer dereference) which appears to be related to a journaled data buffer appearing on a list where it shouldn't be. 3. Direct I/O writes are disabled for the time being (will reappear later) 4. There is probably a deadlock between the page lock and GFS' locks under certain combinations of mmap and fs operation I/O. 5. Issue relating to ref counting on internally used inodes causes a hang on umount (discovered before this patch, and not fixed by it) 6. One part of the directory metadata is different from GFS1 and will need to be resolved before next release. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-08 14:50:51 +03:00
if (gfs2_revoke_check(jd, blkno, start))
[GFS2] Make journaled data files identical to normal files on disk This is a very large patch, with a few still to be resolved issues so you might want to check out the previous head of the tree since this is known to be unstable. Fixes for the various bugs will be forthcoming shortly. This patch removes the special data format which has been used up till now for journaled data files. Directories still retain the old format so that they will remain on disk compatible with earlier releases. As a result you can now do the following with journaled data files: 1) mmap them 2) export them over NFS 3) convert to/from normal files whenever you want to (the zero length restriction is gone) In addition the level at which GFS' locking is done has changed for all files (since they all now use the page cache) such that the locking is done at the page cache level rather than the level of the fs operations. This should mean that things like loopback mounts and other things which touch the page cache directly should now work. Current known issues: 1. There is a lock mode inversion problem related to the resource group hold function which needs to be resolved. 2. Any significant amount of I/O causes an oops with an offset of hex 320 (NULL pointer dereference) which appears to be related to a journaled data buffer appearing on a list where it shouldn't be. 3. Direct I/O writes are disabled for the time being (will reappear later) 4. There is probably a deadlock between the page lock and GFS' locks under certain combinations of mmap and fs operation I/O. 5. Issue relating to ref counting on internally used inodes causes a hang on umount (discovered before this patch, and not fixed by it) 6. One part of the directory metadata is different from GFS1 and will need to be resolved before next release. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-08 14:50:51 +03:00
continue;
error = gfs2_replay_read_block(jd, start, &bh_log);
if (error)
return error;
bh_ip = gfs2_meta_new(gl, blkno);
memcpy(bh_ip->b_data, bh_log->b_data, bh_log->b_size);
/* Unescape */
if (esc) {
__be32 *eptr = (__be32 *)bh_ip->b_data;
*eptr = cpu_to_be32(GFS2_MAGIC);
}
mark_buffer_dirty(bh_ip);
brelse(bh_log);
brelse(bh_ip);
jd->jd_replayed_blocks++;
[GFS2] Make journaled data files identical to normal files on disk This is a very large patch, with a few still to be resolved issues so you might want to check out the previous head of the tree since this is known to be unstable. Fixes for the various bugs will be forthcoming shortly. This patch removes the special data format which has been used up till now for journaled data files. Directories still retain the old format so that they will remain on disk compatible with earlier releases. As a result you can now do the following with journaled data files: 1) mmap them 2) export them over NFS 3) convert to/from normal files whenever you want to (the zero length restriction is gone) In addition the level at which GFS' locking is done has changed for all files (since they all now use the page cache) such that the locking is done at the page cache level rather than the level of the fs operations. This should mean that things like loopback mounts and other things which touch the page cache directly should now work. Current known issues: 1. There is a lock mode inversion problem related to the resource group hold function which needs to be resolved. 2. Any significant amount of I/O causes an oops with an offset of hex 320 (NULL pointer dereference) which appears to be related to a journaled data buffer appearing on a list where it shouldn't be. 3. Direct I/O writes are disabled for the time being (will reappear later) 4. There is probably a deadlock between the page lock and GFS' locks under certain combinations of mmap and fs operation I/O. 5. Issue relating to ref counting on internally used inodes causes a hang on umount (discovered before this patch, and not fixed by it) 6. One part of the directory metadata is different from GFS1 and will need to be resolved before next release. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-08 14:50:51 +03:00
}
return error;
}
/* FIXME: sort out accounting for log blocks etc. */
static void databuf_lo_after_scan(struct gfs2_jdesc *jd, int error, int pass)
{
struct gfs2_inode *ip = GFS2_I(jd->jd_inode);
struct gfs2_sbd *sdp = GFS2_SB(jd->jd_inode);
[GFS2] Make journaled data files identical to normal files on disk This is a very large patch, with a few still to be resolved issues so you might want to check out the previous head of the tree since this is known to be unstable. Fixes for the various bugs will be forthcoming shortly. This patch removes the special data format which has been used up till now for journaled data files. Directories still retain the old format so that they will remain on disk compatible with earlier releases. As a result you can now do the following with journaled data files: 1) mmap them 2) export them over NFS 3) convert to/from normal files whenever you want to (the zero length restriction is gone) In addition the level at which GFS' locking is done has changed for all files (since they all now use the page cache) such that the locking is done at the page cache level rather than the level of the fs operations. This should mean that things like loopback mounts and other things which touch the page cache directly should now work. Current known issues: 1. There is a lock mode inversion problem related to the resource group hold function which needs to be resolved. 2. Any significant amount of I/O causes an oops with an offset of hex 320 (NULL pointer dereference) which appears to be related to a journaled data buffer appearing on a list where it shouldn't be. 3. Direct I/O writes are disabled for the time being (will reappear later) 4. There is probably a deadlock between the page lock and GFS' locks under certain combinations of mmap and fs operation I/O. 5. Issue relating to ref counting on internally used inodes causes a hang on umount (discovered before this patch, and not fixed by it) 6. One part of the directory metadata is different from GFS1 and will need to be resolved before next release. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-08 14:50:51 +03:00
if (error) {
gfs2_inode_metasync(ip->i_gl);
[GFS2] Make journaled data files identical to normal files on disk This is a very large patch, with a few still to be resolved issues so you might want to check out the previous head of the tree since this is known to be unstable. Fixes for the various bugs will be forthcoming shortly. This patch removes the special data format which has been used up till now for journaled data files. Directories still retain the old format so that they will remain on disk compatible with earlier releases. As a result you can now do the following with journaled data files: 1) mmap them 2) export them over NFS 3) convert to/from normal files whenever you want to (the zero length restriction is gone) In addition the level at which GFS' locking is done has changed for all files (since they all now use the page cache) such that the locking is done at the page cache level rather than the level of the fs operations. This should mean that things like loopback mounts and other things which touch the page cache directly should now work. Current known issues: 1. There is a lock mode inversion problem related to the resource group hold function which needs to be resolved. 2. Any significant amount of I/O causes an oops with an offset of hex 320 (NULL pointer dereference) which appears to be related to a journaled data buffer appearing on a list where it shouldn't be. 3. Direct I/O writes are disabled for the time being (will reappear later) 4. There is probably a deadlock between the page lock and GFS' locks under certain combinations of mmap and fs operation I/O. 5. Issue relating to ref counting on internally used inodes causes a hang on umount (discovered before this patch, and not fixed by it) 6. One part of the directory metadata is different from GFS1 and will need to be resolved before next release. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-08 14:50:51 +03:00
return;
}
if (pass != 1)
return;
/* data sync? */
gfs2_inode_metasync(ip->i_gl);
[GFS2] Make journaled data files identical to normal files on disk This is a very large patch, with a few still to be resolved issues so you might want to check out the previous head of the tree since this is known to be unstable. Fixes for the various bugs will be forthcoming shortly. This patch removes the special data format which has been used up till now for journaled data files. Directories still retain the old format so that they will remain on disk compatible with earlier releases. As a result you can now do the following with journaled data files: 1) mmap them 2) export them over NFS 3) convert to/from normal files whenever you want to (the zero length restriction is gone) In addition the level at which GFS' locking is done has changed for all files (since they all now use the page cache) such that the locking is done at the page cache level rather than the level of the fs operations. This should mean that things like loopback mounts and other things which touch the page cache directly should now work. Current known issues: 1. There is a lock mode inversion problem related to the resource group hold function which needs to be resolved. 2. Any significant amount of I/O causes an oops with an offset of hex 320 (NULL pointer dereference) which appears to be related to a journaled data buffer appearing on a list where it shouldn't be. 3. Direct I/O writes are disabled for the time being (will reappear later) 4. There is probably a deadlock between the page lock and GFS' locks under certain combinations of mmap and fs operation I/O. 5. Issue relating to ref counting on internally used inodes causes a hang on umount (discovered before this patch, and not fixed by it) 6. One part of the directory metadata is different from GFS1 and will need to be resolved before next release. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-08 14:50:51 +03:00
fs_info(sdp, "jid=%u: Replayed %u of %u data blocks\n",
jd->jd_jid, jd->jd_replayed_blocks, jd->jd_found_blocks);
[GFS2] Make journaled data files identical to normal files on disk This is a very large patch, with a few still to be resolved issues so you might want to check out the previous head of the tree since this is known to be unstable. Fixes for the various bugs will be forthcoming shortly. This patch removes the special data format which has been used up till now for journaled data files. Directories still retain the old format so that they will remain on disk compatible with earlier releases. As a result you can now do the following with journaled data files: 1) mmap them 2) export them over NFS 3) convert to/from normal files whenever you want to (the zero length restriction is gone) In addition the level at which GFS' locking is done has changed for all files (since they all now use the page cache) such that the locking is done at the page cache level rather than the level of the fs operations. This should mean that things like loopback mounts and other things which touch the page cache directly should now work. Current known issues: 1. There is a lock mode inversion problem related to the resource group hold function which needs to be resolved. 2. Any significant amount of I/O causes an oops with an offset of hex 320 (NULL pointer dereference) which appears to be related to a journaled data buffer appearing on a list where it shouldn't be. 3. Direct I/O writes are disabled for the time being (will reappear later) 4. There is probably a deadlock between the page lock and GFS' locks under certain combinations of mmap and fs operation I/O. 5. Issue relating to ref counting on internally used inodes causes a hang on umount (discovered before this patch, and not fixed by it) 6. One part of the directory metadata is different from GFS1 and will need to be resolved before next release. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-08 14:50:51 +03:00
}
static void databuf_lo_after_commit(struct gfs2_sbd *sdp, struct gfs2_trans *tr)
[GFS2] Make journaled data files identical to normal files on disk This is a very large patch, with a few still to be resolved issues so you might want to check out the previous head of the tree since this is known to be unstable. Fixes for the various bugs will be forthcoming shortly. This patch removes the special data format which has been used up till now for journaled data files. Directories still retain the old format so that they will remain on disk compatible with earlier releases. As a result you can now do the following with journaled data files: 1) mmap them 2) export them over NFS 3) convert to/from normal files whenever you want to (the zero length restriction is gone) In addition the level at which GFS' locking is done has changed for all files (since they all now use the page cache) such that the locking is done at the page cache level rather than the level of the fs operations. This should mean that things like loopback mounts and other things which touch the page cache directly should now work. Current known issues: 1. There is a lock mode inversion problem related to the resource group hold function which needs to be resolved. 2. Any significant amount of I/O causes an oops with an offset of hex 320 (NULL pointer dereference) which appears to be related to a journaled data buffer appearing on a list where it shouldn't be. 3. Direct I/O writes are disabled for the time being (will reappear later) 4. There is probably a deadlock between the page lock and GFS' locks under certain combinations of mmap and fs operation I/O. 5. Issue relating to ref counting on internally used inodes causes a hang on umount (discovered before this patch, and not fixed by it) 6. One part of the directory metadata is different from GFS1 and will need to be resolved before next release. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-08 14:50:51 +03:00
{
struct list_head *head;
[GFS2] Make journaled data files identical to normal files on disk This is a very large patch, with a few still to be resolved issues so you might want to check out the previous head of the tree since this is known to be unstable. Fixes for the various bugs will be forthcoming shortly. This patch removes the special data format which has been used up till now for journaled data files. Directories still retain the old format so that they will remain on disk compatible with earlier releases. As a result you can now do the following with journaled data files: 1) mmap them 2) export them over NFS 3) convert to/from normal files whenever you want to (the zero length restriction is gone) In addition the level at which GFS' locking is done has changed for all files (since they all now use the page cache) such that the locking is done at the page cache level rather than the level of the fs operations. This should mean that things like loopback mounts and other things which touch the page cache directly should now work. Current known issues: 1. There is a lock mode inversion problem related to the resource group hold function which needs to be resolved. 2. Any significant amount of I/O causes an oops with an offset of hex 320 (NULL pointer dereference) which appears to be related to a journaled data buffer appearing on a list where it shouldn't be. 3. Direct I/O writes are disabled for the time being (will reappear later) 4. There is probably a deadlock between the page lock and GFS' locks under certain combinations of mmap and fs operation I/O. 5. Issue relating to ref counting on internally used inodes causes a hang on umount (discovered before this patch, and not fixed by it) 6. One part of the directory metadata is different from GFS1 and will need to be resolved before next release. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-08 14:50:51 +03:00
struct gfs2_bufdata *bd;
if (tr == NULL)
return;
head = &tr->tr_databuf;
[GFS2] Make journaled data files identical to normal files on disk This is a very large patch, with a few still to be resolved issues so you might want to check out the previous head of the tree since this is known to be unstable. Fixes for the various bugs will be forthcoming shortly. This patch removes the special data format which has been used up till now for journaled data files. Directories still retain the old format so that they will remain on disk compatible with earlier releases. As a result you can now do the following with journaled data files: 1) mmap them 2) export them over NFS 3) convert to/from normal files whenever you want to (the zero length restriction is gone) In addition the level at which GFS' locking is done has changed for all files (since they all now use the page cache) such that the locking is done at the page cache level rather than the level of the fs operations. This should mean that things like loopback mounts and other things which touch the page cache directly should now work. Current known issues: 1. There is a lock mode inversion problem related to the resource group hold function which needs to be resolved. 2. Any significant amount of I/O causes an oops with an offset of hex 320 (NULL pointer dereference) which appears to be related to a journaled data buffer appearing on a list where it shouldn't be. 3. Direct I/O writes are disabled for the time being (will reappear later) 4. There is probably a deadlock between the page lock and GFS' locks under certain combinations of mmap and fs operation I/O. 5. Issue relating to ref counting on internally used inodes causes a hang on umount (discovered before this patch, and not fixed by it) 6. One part of the directory metadata is different from GFS1 and will need to be resolved before next release. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-08 14:50:51 +03:00
while (!list_empty(head)) {
bd = list_first_entry(head, struct gfs2_bufdata, bd_list);
list_del_init(&bd->bd_list);
gfs2_unpin(sdp, bd->bd_bh, tr);
[GFS2] Make journaled data files identical to normal files on disk This is a very large patch, with a few still to be resolved issues so you might want to check out the previous head of the tree since this is known to be unstable. Fixes for the various bugs will be forthcoming shortly. This patch removes the special data format which has been used up till now for journaled data files. Directories still retain the old format so that they will remain on disk compatible with earlier releases. As a result you can now do the following with journaled data files: 1) mmap them 2) export them over NFS 3) convert to/from normal files whenever you want to (the zero length restriction is gone) In addition the level at which GFS' locking is done has changed for all files (since they all now use the page cache) such that the locking is done at the page cache level rather than the level of the fs operations. This should mean that things like loopback mounts and other things which touch the page cache directly should now work. Current known issues: 1. There is a lock mode inversion problem related to the resource group hold function which needs to be resolved. 2. Any significant amount of I/O causes an oops with an offset of hex 320 (NULL pointer dereference) which appears to be related to a journaled data buffer appearing on a list where it shouldn't be. 3. Direct I/O writes are disabled for the time being (will reappear later) 4. There is probably a deadlock between the page lock and GFS' locks under certain combinations of mmap and fs operation I/O. 5. Issue relating to ref counting on internally used inodes causes a hang on umount (discovered before this patch, and not fixed by it) 6. One part of the directory metadata is different from GFS1 and will need to be resolved before next release. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-08 14:50:51 +03:00
}
}
[GFS2] Make journaled data files identical to normal files on disk This is a very large patch, with a few still to be resolved issues so you might want to check out the previous head of the tree since this is known to be unstable. Fixes for the various bugs will be forthcoming shortly. This patch removes the special data format which has been used up till now for journaled data files. Directories still retain the old format so that they will remain on disk compatible with earlier releases. As a result you can now do the following with journaled data files: 1) mmap them 2) export them over NFS 3) convert to/from normal files whenever you want to (the zero length restriction is gone) In addition the level at which GFS' locking is done has changed for all files (since they all now use the page cache) such that the locking is done at the page cache level rather than the level of the fs operations. This should mean that things like loopback mounts and other things which touch the page cache directly should now work. Current known issues: 1. There is a lock mode inversion problem related to the resource group hold function which needs to be resolved. 2. Any significant amount of I/O causes an oops with an offset of hex 320 (NULL pointer dereference) which appears to be related to a journaled data buffer appearing on a list where it shouldn't be. 3. Direct I/O writes are disabled for the time being (will reappear later) 4. There is probably a deadlock between the page lock and GFS' locks under certain combinations of mmap and fs operation I/O. 5. Issue relating to ref counting on internally used inodes causes a hang on umount (discovered before this patch, and not fixed by it) 6. One part of the directory metadata is different from GFS1 and will need to be resolved before next release. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-08 14:50:51 +03:00
static const struct gfs2_log_operations gfs2_buf_lops = {
.lo_before_commit = buf_lo_before_commit,
.lo_after_commit = buf_lo_after_commit,
.lo_before_scan = buf_lo_before_scan,
.lo_scan_elements = buf_lo_scan_elements,
.lo_after_scan = buf_lo_after_scan,
.lo_name = "buf",
};
static const struct gfs2_log_operations gfs2_revoke_lops = {
.lo_before_commit = revoke_lo_before_commit,
.lo_after_commit = revoke_lo_after_commit,
.lo_before_scan = revoke_lo_before_scan,
.lo_scan_elements = revoke_lo_scan_elements,
.lo_after_scan = revoke_lo_after_scan,
.lo_name = "revoke",
};
static const struct gfs2_log_operations gfs2_databuf_lops = {
.lo_before_commit = databuf_lo_before_commit,
[GFS2] Make journaled data files identical to normal files on disk This is a very large patch, with a few still to be resolved issues so you might want to check out the previous head of the tree since this is known to be unstable. Fixes for the various bugs will be forthcoming shortly. This patch removes the special data format which has been used up till now for journaled data files. Directories still retain the old format so that they will remain on disk compatible with earlier releases. As a result you can now do the following with journaled data files: 1) mmap them 2) export them over NFS 3) convert to/from normal files whenever you want to (the zero length restriction is gone) In addition the level at which GFS' locking is done has changed for all files (since they all now use the page cache) such that the locking is done at the page cache level rather than the level of the fs operations. This should mean that things like loopback mounts and other things which touch the page cache directly should now work. Current known issues: 1. There is a lock mode inversion problem related to the resource group hold function which needs to be resolved. 2. Any significant amount of I/O causes an oops with an offset of hex 320 (NULL pointer dereference) which appears to be related to a journaled data buffer appearing on a list where it shouldn't be. 3. Direct I/O writes are disabled for the time being (will reappear later) 4. There is probably a deadlock between the page lock and GFS' locks under certain combinations of mmap and fs operation I/O. 5. Issue relating to ref counting on internally used inodes causes a hang on umount (discovered before this patch, and not fixed by it) 6. One part of the directory metadata is different from GFS1 and will need to be resolved before next release. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-02-08 14:50:51 +03:00
.lo_after_commit = databuf_lo_after_commit,
.lo_scan_elements = databuf_lo_scan_elements,
.lo_after_scan = databuf_lo_after_scan,
.lo_name = "databuf",
};
const struct gfs2_log_operations *gfs2_log_ops[] = {
&gfs2_databuf_lops,
&gfs2_buf_lops,
&gfs2_revoke_lops,
NULL,
};