microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/arch/xtensa/include/asm/initialize_mmu.h

164 строки
3.3 KiB
C
Исходник Обычный вид История

xtensa: initialize atomctl SR In order to use S32C1I instruction on cores with ATOMCTL SR the register must be properly initialized. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-11-19 07:00:41 +04:00
/*
* arch/xtensa/include/asm/initialize_mmu.h
*
* Initializes MMU:
*
* For the new V3 MMU we remap the TLB from virtual == physical
* to the standard Linux mapping used in earlier MMU's.
*
* The the MMU we also support a new configuration register that
* specifies how the S32C1I instruction operates with the cache
* controller.
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file "COPYING" in the main directory of
* this archive for more details.
*
* Copyright (C) 2008 - 2012 Tensilica, Inc.
*
* Marc Gauthier <marc@tensilica.com>
* Pete Delaney <piet@tensilica.com>
*/
#ifndef _XTENSA_INITIALIZE_MMU_H
#define _XTENSA_INITIALIZE_MMU_H
xtensa: add MMU v3 support MMUv3 comes out of reset with identity vaddr -> paddr mapping in the TLB way 6: Way 6 (512 MB) Vaddr Paddr ASID Attr RWX Cache ---------- ---------- ---- ---- --- ------- 0x00000000 0x00000000 0x01 0x03 RWX Bypass 0x20000000 0x20000000 0x01 0x03 RWX Bypass 0x40000000 0x40000000 0x01 0x03 RWX Bypass 0x60000000 0x60000000 0x01 0x03 RWX Bypass 0x80000000 0x80000000 0x01 0x03 RWX Bypass 0xa0000000 0xa0000000 0x01 0x03 RWX Bypass 0xc0000000 0xc0000000 0x01 0x03 RWX Bypass 0xe0000000 0xe0000000 0x01 0x03 RWX Bypass This patch adds remapping code at the reset vector or at the kernel _start (depending on CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX) that reconfigures MMUv3 as MMUv2: Way 5 (128 MB) Vaddr Paddr ASID Attr RWX Cache ---------- ---------- ---- ---- --- ------- 0xd0000000 0x00000000 0x01 0x07 RWX WB 0xd8000000 0x00000000 0x01 0x03 RWX Bypass Way 6 (256 MB) Vaddr Paddr ASID Attr RWX Cache ---------- ---------- ---- ---- --- ------- 0xe0000000 0xf0000000 0x01 0x07 RWX WB 0xf0000000 0xf0000000 0x01 0x03 RWX Bypass Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-03 15:01:43 +04:00
#include <asm/pgtable.h>
#include <asm/vectors.h>
xtensa: remap io area defined in device tree Use the simple-bus node to discover the io area, and remap the cached and bypass io ranges. The parent-bus-address value of the first triplet in the "ranges" property is used. This value is rounded down to the nearest 256MB boundary. The length of the io area is fixed at 256MB; the "ranges" property length value is ignored. Other limitations: (1) only the first simple-bus node is considered, and (2) only the first triplet of the "ranges" property is considered. See ePAPR 1.1 §6.5 for the simple-bus node description, and §2.3.8 for the "ranges" property description. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2013-12-29 13:03:30 +04:00
#define CA_BYPASS (_PAGE_CA_BYPASS | _PAGE_HW_WRITE | _PAGE_HW_EXEC)
#define CA_WRITEBACK (_PAGE_CA_WB | _PAGE_HW_WRITE | _PAGE_HW_EXEC)
xtensa: initialize atomctl SR In order to use S32C1I instruction on cores with ATOMCTL SR the register must be properly initialized. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-11-19 07:00:41 +04:00
#ifdef __ASSEMBLY__
#define XTENSA_HWVERSION_RC_2009_0 230000
.macro initialize_mmu
#if XCHAL_HAVE_S32C1I && (XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RC_2009_0)
/*
* We Have Atomic Operation Control (ATOMCTL) Register; Initialize it.
* For details see Documentation/xtensa/atomctl.txt
*/
#if XCHAL_DCACHE_IS_COHERENT
movi a3, 0x25 /* For SMP/MX -- internal for writeback,
* RCW otherwise
*/
#else
movi a3, 0x29 /* non-MX -- Most cores use Std Memory
* Controlers which usually can't use RCW
*/
#endif
wsr a3, atomctl
#endif /* XCHAL_HAVE_S32C1I &&
* (XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RC_2009_0)
*/
xtensa: add MMU v3 support MMUv3 comes out of reset with identity vaddr -> paddr mapping in the TLB way 6: Way 6 (512 MB) Vaddr Paddr ASID Attr RWX Cache ---------- ---------- ---- ---- --- ------- 0x00000000 0x00000000 0x01 0x03 RWX Bypass 0x20000000 0x20000000 0x01 0x03 RWX Bypass 0x40000000 0x40000000 0x01 0x03 RWX Bypass 0x60000000 0x60000000 0x01 0x03 RWX Bypass 0x80000000 0x80000000 0x01 0x03 RWX Bypass 0xa0000000 0xa0000000 0x01 0x03 RWX Bypass 0xc0000000 0xc0000000 0x01 0x03 RWX Bypass 0xe0000000 0xe0000000 0x01 0x03 RWX Bypass This patch adds remapping code at the reset vector or at the kernel _start (depending on CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX) that reconfigures MMUv3 as MMUv2: Way 5 (128 MB) Vaddr Paddr ASID Attr RWX Cache ---------- ---------- ---- ---- --- ------- 0xd0000000 0x00000000 0x01 0x07 RWX WB 0xd8000000 0x00000000 0x01 0x03 RWX Bypass Way 6 (256 MB) Vaddr Paddr ASID Attr RWX Cache ---------- ---------- ---- ---- --- ------- 0xe0000000 0xf0000000 0x01 0x07 RWX WB 0xf0000000 0xf0000000 0x01 0x03 RWX Bypass Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-03 15:01:43 +04:00
#if defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY
/*
* Have MMU v3
*/
#if !XCHAL_HAVE_VECBASE
# error "MMU v3 requires reloc vectors"
#endif
movi a1, 0
_call0 1f
_j 2f
.align 4
1: movi a2, 0x10000000
movi a3, 0x18000000
add a2, a2, a0
9: bgeu a2, a3, 9b /* PC is out of the expected range */
/* Step 1: invalidate mapping at 0x40000000..0x5FFFFFFF. */
movi a2, 0x40000006
idtlb a2
iitlb a2
isync
/* Step 2: map 0x40000000..0x47FFFFFF to paddr containing this code
* and jump to the new mapping.
*/
srli a3, a0, 27
slli a3, a3, 27
addi a3, a3, CA_BYPASS
addi a7, a2, -1
wdtlb a3, a7
witlb a3, a7
isync
slli a4, a0, 5
srli a4, a4, 5
addi a5, a2, -6
add a4, a4, a5
jx a4
/* Step 3: unmap everything other than current area.
* Start at 0x60000000, wrap around, and end with 0x20000000
*/
2: movi a4, 0x20000000
add a5, a2, a4
3: idtlb a5
iitlb a5
add a5, a5, a4
bne a5, a2, 3b
/* Step 4: Setup MMU with the old V2 mappings. */
movi a6, 0x01000000
wsr a6, ITLBCFG
wsr a6, DTLBCFG
isync
movi a5, 0xd0000005
movi a4, CA_WRITEBACK
wdtlb a4, a5
witlb a4, a5
movi a5, 0xd8000005
movi a4, CA_BYPASS
wdtlb a4, a5
witlb a4, a5
xtensa: avoid duplicate of IO range definitions Define IO addresses in a single place, to make it easier to change for non-standard memory maps. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2013-11-17 10:14:54 +04:00
movi a5, XCHAL_KIO_CACHED_VADDR + 6
xtensa: remap io area defined in device tree Use the simple-bus node to discover the io area, and remap the cached and bypass io ranges. The parent-bus-address value of the first triplet in the "ranges" property is used. This value is rounded down to the nearest 256MB boundary. The length of the io area is fixed at 256MB; the "ranges" property length value is ignored. Other limitations: (1) only the first simple-bus node is considered, and (2) only the first triplet of the "ranges" property is considered. See ePAPR 1.1 §6.5 for the simple-bus node description, and §2.3.8 for the "ranges" property description. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2013-12-29 13:03:30 +04:00
movi a4, XCHAL_KIO_DEFAULT_PADDR + CA_WRITEBACK
xtensa: add MMU v3 support MMUv3 comes out of reset with identity vaddr -> paddr mapping in the TLB way 6: Way 6 (512 MB) Vaddr Paddr ASID Attr RWX Cache ---------- ---------- ---- ---- --- ------- 0x00000000 0x00000000 0x01 0x03 RWX Bypass 0x20000000 0x20000000 0x01 0x03 RWX Bypass 0x40000000 0x40000000 0x01 0x03 RWX Bypass 0x60000000 0x60000000 0x01 0x03 RWX Bypass 0x80000000 0x80000000 0x01 0x03 RWX Bypass 0xa0000000 0xa0000000 0x01 0x03 RWX Bypass 0xc0000000 0xc0000000 0x01 0x03 RWX Bypass 0xe0000000 0xe0000000 0x01 0x03 RWX Bypass This patch adds remapping code at the reset vector or at the kernel _start (depending on CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX) that reconfigures MMUv3 as MMUv2: Way 5 (128 MB) Vaddr Paddr ASID Attr RWX Cache ---------- ---------- ---- ---- --- ------- 0xd0000000 0x00000000 0x01 0x07 RWX WB 0xd8000000 0x00000000 0x01 0x03 RWX Bypass Way 6 (256 MB) Vaddr Paddr ASID Attr RWX Cache ---------- ---------- ---- ---- --- ------- 0xe0000000 0xf0000000 0x01 0x07 RWX WB 0xf0000000 0xf0000000 0x01 0x03 RWX Bypass Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-03 15:01:43 +04:00
wdtlb a4, a5
witlb a4, a5
xtensa: avoid duplicate of IO range definitions Define IO addresses in a single place, to make it easier to change for non-standard memory maps. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2013-11-17 10:14:54 +04:00
movi a5, XCHAL_KIO_BYPASS_VADDR + 6
xtensa: remap io area defined in device tree Use the simple-bus node to discover the io area, and remap the cached and bypass io ranges. The parent-bus-address value of the first triplet in the "ranges" property is used. This value is rounded down to the nearest 256MB boundary. The length of the io area is fixed at 256MB; the "ranges" property length value is ignored. Other limitations: (1) only the first simple-bus node is considered, and (2) only the first triplet of the "ranges" property is considered. See ePAPR 1.1 §6.5 for the simple-bus node description, and §2.3.8 for the "ranges" property description. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2013-12-29 13:03:30 +04:00
movi a4, XCHAL_KIO_DEFAULT_PADDR + CA_BYPASS
xtensa: add MMU v3 support MMUv3 comes out of reset with identity vaddr -> paddr mapping in the TLB way 6: Way 6 (512 MB) Vaddr Paddr ASID Attr RWX Cache ---------- ---------- ---- ---- --- ------- 0x00000000 0x00000000 0x01 0x03 RWX Bypass 0x20000000 0x20000000 0x01 0x03 RWX Bypass 0x40000000 0x40000000 0x01 0x03 RWX Bypass 0x60000000 0x60000000 0x01 0x03 RWX Bypass 0x80000000 0x80000000 0x01 0x03 RWX Bypass 0xa0000000 0xa0000000 0x01 0x03 RWX Bypass 0xc0000000 0xc0000000 0x01 0x03 RWX Bypass 0xe0000000 0xe0000000 0x01 0x03 RWX Bypass This patch adds remapping code at the reset vector or at the kernel _start (depending on CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX) that reconfigures MMUv3 as MMUv2: Way 5 (128 MB) Vaddr Paddr ASID Attr RWX Cache ---------- ---------- ---- ---- --- ------- 0xd0000000 0x00000000 0x01 0x07 RWX WB 0xd8000000 0x00000000 0x01 0x03 RWX Bypass Way 6 (256 MB) Vaddr Paddr ASID Attr RWX Cache ---------- ---------- ---- ---- --- ------- 0xe0000000 0xf0000000 0x01 0x07 RWX WB 0xf0000000 0xf0000000 0x01 0x03 RWX Bypass Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-12-03 15:01:43 +04:00
wdtlb a4, a5
witlb a4, a5
isync
/* Jump to self, using MMU v2 mappings. */
movi a4, 1f
jx a4
1:
movi a2, VECBASE_RESET_VADDR
wsr a2, vecbase
/* Step 5: remove temporary mapping. */
idtlb a7
iitlb a7
isync
movi a0, 0
wsr a0, ptevaddr
rsync
#endif /* defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU &&
XCHAL_HAVE_SPANNING_WAY */
xtensa: initialize atomctl SR In order to use S32C1I instruction on cores with ATOMCTL SR the register must be properly initialized. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2012-11-19 07:00:41 +04:00
.endm
#endif /*__ASSEMBLY__*/
#endif /* _XTENSA_INITIALIZE_MMU_H */