WSL2-Linux-Kernel/include/linux/dmi.h

155 строки
4.3 KiB
C
Исходник Обычный вид История

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 17:07:57 +03:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __DMI_H__
#define __DMI_H__
#include <linux/list.h>
#include <linux/kobject.h>
#include <linux/mod_devicetable.h>
/* enum dmi_field is in mod_devicetable.h */
enum dmi_device_type {
DMI_DEV_TYPE_ANY = 0,
DMI_DEV_TYPE_OTHER,
DMI_DEV_TYPE_UNKNOWN,
DMI_DEV_TYPE_VIDEO,
DMI_DEV_TYPE_SCSI,
DMI_DEV_TYPE_ETHERNET,
DMI_DEV_TYPE_TOKENRING,
DMI_DEV_TYPE_SOUND,
DMI_DEV_TYPE_PATA,
DMI_DEV_TYPE_SATA,
DMI_DEV_TYPE_SAS,
DMI_DEV_TYPE_IPMI = -1,
DMI_DEV_TYPE_OEM_STRING = -2,
DMI_DEV_TYPE_DEV_ONBOARD = -3,
DMI_DEV_TYPE_DEV_SLOT = -4,
};
enum dmi_entry_type {
DMI_ENTRY_BIOS = 0,
DMI_ENTRY_SYSTEM,
DMI_ENTRY_BASEBOARD,
DMI_ENTRY_CHASSIS,
DMI_ENTRY_PROCESSOR,
DMI_ENTRY_MEM_CONTROLLER,
DMI_ENTRY_MEM_MODULE,
DMI_ENTRY_CACHE,
DMI_ENTRY_PORT_CONNECTOR,
DMI_ENTRY_SYSTEM_SLOT,
DMI_ENTRY_ONBOARD_DEVICE,
DMI_ENTRY_OEMSTRINGS,
DMI_ENTRY_SYSCONF,
DMI_ENTRY_BIOS_LANG,
DMI_ENTRY_GROUP_ASSOC,
DMI_ENTRY_SYSTEM_EVENT_LOG,
DMI_ENTRY_PHYS_MEM_ARRAY,
DMI_ENTRY_MEM_DEVICE,
DMI_ENTRY_32_MEM_ERROR,
DMI_ENTRY_MEM_ARRAY_MAPPED_ADDR,
DMI_ENTRY_MEM_DEV_MAPPED_ADDR,
DMI_ENTRY_BUILTIN_POINTING_DEV,
DMI_ENTRY_PORTABLE_BATTERY,
DMI_ENTRY_SYSTEM_RESET,
DMI_ENTRY_HW_SECURITY,
DMI_ENTRY_SYSTEM_POWER_CONTROLS,
DMI_ENTRY_VOLTAGE_PROBE,
DMI_ENTRY_COOLING_DEV,
DMI_ENTRY_TEMP_PROBE,
DMI_ENTRY_ELECTRICAL_CURRENT_PROBE,
DMI_ENTRY_OOB_REMOTE_ACCESS,
DMI_ENTRY_BIS_ENTRY,
DMI_ENTRY_SYSTEM_BOOT,
DMI_ENTRY_MGMT_DEV,
DMI_ENTRY_MGMT_DEV_COMPONENT,
DMI_ENTRY_MGMT_DEV_THRES,
DMI_ENTRY_MEM_CHANNEL,
DMI_ENTRY_IPMI_DEV,
DMI_ENTRY_SYS_POWER_SUPPLY,
DMI_ENTRY_ADDITIONAL,
DMI_ENTRY_ONBOARD_DEV_EXT,
DMI_ENTRY_MGMT_CONTROLLER_HOST,
DMI_ENTRY_INACTIVE = 126,
DMI_ENTRY_END_OF_TABLE = 127,
};
struct dmi_header {
u8 type;
u8 length;
u16 handle;
} __packed;
struct dmi_device {
struct list_head list;
int type;
const char *name;
void *device_data; /* Type specific data */
};
#ifdef CONFIG_DMI
struct dmi_dev_onboard {
struct dmi_device dev;
int instance;
int segment;
int bus;
int devfn;
};
extern struct kobject *dmi_kobj;
extern int dmi_check_system(const struct dmi_system_id *list);
const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list);
extern const char * dmi_get_system_info(int field);
extern const struct dmi_device * dmi_find_device(int type, const char *name,
const struct dmi_device *from);
extern void dmi_scan_machine(void);
extern void dmi_memdev_walk(void);
dump_stack: implement arch-specific hardware description in task dumps x86 and ia64 can acquire extra hardware identification information from DMI and print it along with task dumps; however, the usage isn't consistent. * x86 show_regs() collects vendor, product and board strings and print them out with PID, comm and utsname. Some of the information is printed again later in the same dump. * warn_slowpath_common() explicitly accesses the DMI board and prints it out with "Hardware name:" label. This applies to both x86 and ia64 but is irrelevant on all other archs. * ia64 doesn't show DMI information on other non-WARN dumps. This patch introduces arch-specific hardware description used by dump_stack(). It can be set by calling dump_stack_set_arch_desc() during boot and, if exists, printed out in a separate line with "Hardware name:" label. dmi_set_dump_stack_arch_desc() is added which sets arch-specific description from DMI data. It uses dmi_ids_string[] which is set from dmi_present() used for DMI debug message. It is superset of the information x86 show_regs() is using. The function is called from x86 and ia64 boot code right after dmi_scan_machine(). This makes the explicit DMI handling in warn_slowpath_common() unnecessary. Removed. show_regs() isn't yet converted to use generic debug information printing and this patch doesn't remove the duplicate DMI handling in x86 show_regs(). The next patch will unify show_regs() handling and remove the duplication. An example WARN dump follows. WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505() Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #3 Hardware name: empty empty/S3992, BIOS 080011 10/26/2007 0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48 ffffffff8108f500 ffffffff82228240 0000000000000040 ffffffff8234a08e 0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58 Call Trace: [<ffffffff81c614dc>] dump_stack+0x19/0x1b [<ffffffff8108f500>] warn_slowpath_common+0x70/0xa0 [<ffffffff8108f54a>] warn_slowpath_null+0x1a/0x20 [<ffffffff8234a0c3>] init_workqueues+0x35/0x505 ... v2: Use the same string as the debug message from dmi_present() which also contains BIOS information. Move hardware name into its own line as warn_slowpath_common() did. This change was suggested by Bjorn Helgaas. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-01 02:27:15 +04:00
extern void dmi_set_dump_stack_arch_desc(void);
extern bool dmi_get_date(int field, int *yearp, int *monthp, int *dayp);
extern int dmi_get_bios_year(void);
extern int dmi_name_in_vendors(const char *str);
extern int dmi_name_in_serial(const char *str);
extern int dmi_available;
extern int dmi_walk(void (*decode)(const struct dmi_header *, void *),
void *private_data);
extern bool dmi_match(enum dmi_field f, const char *str);
extern void dmi_memdev_name(u16 handle, const char **bank, const char **device);
extern u64 dmi_memdev_size(u16 handle);
#else
static inline int dmi_check_system(const struct dmi_system_id *list) { return 0; }
static inline const char * dmi_get_system_info(int field) { return NULL; }
static inline const struct dmi_device * dmi_find_device(int type, const char *name,
const struct dmi_device *from) { return NULL; }
static inline void dmi_scan_machine(void) { return; }
static inline void dmi_memdev_walk(void) { }
dump_stack: implement arch-specific hardware description in task dumps x86 and ia64 can acquire extra hardware identification information from DMI and print it along with task dumps; however, the usage isn't consistent. * x86 show_regs() collects vendor, product and board strings and print them out with PID, comm and utsname. Some of the information is printed again later in the same dump. * warn_slowpath_common() explicitly accesses the DMI board and prints it out with "Hardware name:" label. This applies to both x86 and ia64 but is irrelevant on all other archs. * ia64 doesn't show DMI information on other non-WARN dumps. This patch introduces arch-specific hardware description used by dump_stack(). It can be set by calling dump_stack_set_arch_desc() during boot and, if exists, printed out in a separate line with "Hardware name:" label. dmi_set_dump_stack_arch_desc() is added which sets arch-specific description from DMI data. It uses dmi_ids_string[] which is set from dmi_present() used for DMI debug message. It is superset of the information x86 show_regs() is using. The function is called from x86 and ia64 boot code right after dmi_scan_machine(). This makes the explicit DMI handling in warn_slowpath_common() unnecessary. Removed. show_regs() isn't yet converted to use generic debug information printing and this patch doesn't remove the duplicate DMI handling in x86 show_regs(). The next patch will unify show_regs() handling and remove the duplication. An example WARN dump follows. WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505() Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #3 Hardware name: empty empty/S3992, BIOS 080011 10/26/2007 0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48 ffffffff8108f500 ffffffff82228240 0000000000000040 ffffffff8234a08e 0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58 Call Trace: [<ffffffff81c614dc>] dump_stack+0x19/0x1b [<ffffffff8108f500>] warn_slowpath_common+0x70/0xa0 [<ffffffff8108f54a>] warn_slowpath_null+0x1a/0x20 [<ffffffff8234a0c3>] init_workqueues+0x35/0x505 ... v2: Use the same string as the debug message from dmi_present() which also contains BIOS information. Move hardware name into its own line as warn_slowpath_common() did. This change was suggested by Bjorn Helgaas. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-01 02:27:15 +04:00
static inline void dmi_set_dump_stack_arch_desc(void) { }
static inline bool dmi_get_date(int field, int *yearp, int *monthp, int *dayp)
{
if (yearp)
*yearp = 0;
if (monthp)
*monthp = 0;
if (dayp)
*dayp = 0;
return false;
}
static inline int dmi_get_bios_year(void) { return -ENXIO; }
static inline int dmi_name_in_vendors(const char *s) { return 0; }
static inline int dmi_name_in_serial(const char *s) { return 0; }
#define dmi_available 0
static inline int dmi_walk(void (*decode)(const struct dmi_header *, void *),
void *private_data) { return -ENXIO; }
static inline bool dmi_match(enum dmi_field f, const char *str)
{ return false; }
static inline void dmi_memdev_name(u16 handle, const char **bank,
const char **device) { }
static inline u64 dmi_memdev_size(u16 handle) { return ~0ul; }
static inline const struct dmi_system_id *
dmi_first_match(const struct dmi_system_id *list) { return NULL; }
#endif
#endif /* __DMI_H__ */