WSL2-Linux-Kernel/net/xdp/xsk.c

1182 строки
26 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0
/* XDP sockets
*
* AF_XDP sockets allows a channel between XDP programs and userspace
* applications.
* Copyright(c) 2018 Intel Corporation.
*
* Author(s): Björn Töpel <bjorn.topel@intel.com>
* Magnus Karlsson <magnus.karlsson@intel.com>
*/
#define pr_fmt(fmt) "AF_XDP: %s: " fmt, __func__
#include <linux/if_xdp.h>
#include <linux/init.h>
#include <linux/sched/mm.h>
#include <linux/sched/signal.h>
#include <linux/sched/task.h>
#include <linux/socket.h>
#include <linux/file.h>
#include <linux/uaccess.h>
#include <linux/net.h>
#include <linux/netdevice.h>
#include <linux/rculist.h>
#include <net/xdp_sock.h>
#include <net/xdp.h>
#include "xsk_queue.h"
#include "xdp_umem.h"
#include "xsk.h"
#define TX_BATCH_SIZE 16
bool xsk_is_setup_for_bpf_map(struct xdp_sock *xs)
{
return READ_ONCE(xs->rx) && READ_ONCE(xs->umem) &&
READ_ONCE(xs->umem->fq);
}
bool xsk_umem_has_addrs(struct xdp_umem *umem, u32 cnt)
{
return xskq_has_addrs(umem->fq, cnt);
}
EXPORT_SYMBOL(xsk_umem_has_addrs);
u64 *xsk_umem_peek_addr(struct xdp_umem *umem, u64 *addr)
{
return xskq_peek_addr(umem->fq, addr, umem);
}
EXPORT_SYMBOL(xsk_umem_peek_addr);
void xsk_umem_discard_addr(struct xdp_umem *umem)
{
xskq_discard_addr(umem->fq);
}
EXPORT_SYMBOL(xsk_umem_discard_addr);
xsk: add support for need_wakeup flag in AF_XDP rings This commit adds support for a new flag called need_wakeup in the AF_XDP Tx and fill rings. When this flag is set, it means that the application has to explicitly wake up the kernel Rx (for the bit in the fill ring) or kernel Tx (for bit in the Tx ring) processing by issuing a syscall. Poll() can wake up both depending on the flags submitted and sendto() will wake up tx processing only. The main reason for introducing this new flag is to be able to efficiently support the case when application and driver is executing on the same core. Previously, the driver was just busy-spinning on the fill ring if it ran out of buffers in the HW and there were none on the fill ring. This approach works when the application is running on another core as it can replenish the fill ring while the driver is busy-spinning. Though, this is a lousy approach if both of them are running on the same core as the probability of the fill ring getting more entries when the driver is busy-spinning is zero. With this new feature the driver now sets the need_wakeup flag and returns to the application. The application can then replenish the fill queue and then explicitly wake up the Rx processing in the kernel using the syscall poll(). For Tx, the flag is only set to one if the driver has no outstanding Tx completion interrupts. If it has some, the flag is zero as it will be woken up by a completion interrupt anyway. As a nice side effect, this new flag also improves the performance of the case where application and driver are running on two different cores as it reduces the number of syscalls to the kernel. The kernel tells user space if it needs to be woken up by a syscall, and this eliminates many of the syscalls. This flag needs some simple driver support. If the driver does not support this, the Rx flag is always zero and the Tx flag is always one. This makes any application relying on this feature default to the old behaviour of not requiring any syscalls in the Rx path and always having to call sendto() in the Tx path. For backwards compatibility reasons, this feature has to be explicitly turned on using a new bind flag (XDP_USE_NEED_WAKEUP). I recommend that you always turn it on as it so far always have had a positive performance impact. The name and inspiration of the flag has been taken from io_uring by Jens Axboe. Details about this feature in io_uring can be found in http://kernel.dk/io_uring.pdf, section 8.3. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-14 10:27:17 +03:00
void xsk_set_rx_need_wakeup(struct xdp_umem *umem)
{
if (umem->need_wakeup & XDP_WAKEUP_RX)
return;
umem->fq->ring->flags |= XDP_RING_NEED_WAKEUP;
umem->need_wakeup |= XDP_WAKEUP_RX;
}
EXPORT_SYMBOL(xsk_set_rx_need_wakeup);
void xsk_set_tx_need_wakeup(struct xdp_umem *umem)
{
struct xdp_sock *xs;
if (umem->need_wakeup & XDP_WAKEUP_TX)
return;
rcu_read_lock();
list_for_each_entry_rcu(xs, &umem->xsk_list, list) {
xs->tx->ring->flags |= XDP_RING_NEED_WAKEUP;
}
rcu_read_unlock();
umem->need_wakeup |= XDP_WAKEUP_TX;
}
EXPORT_SYMBOL(xsk_set_tx_need_wakeup);
void xsk_clear_rx_need_wakeup(struct xdp_umem *umem)
{
if (!(umem->need_wakeup & XDP_WAKEUP_RX))
return;
umem->fq->ring->flags &= ~XDP_RING_NEED_WAKEUP;
umem->need_wakeup &= ~XDP_WAKEUP_RX;
}
EXPORT_SYMBOL(xsk_clear_rx_need_wakeup);
void xsk_clear_tx_need_wakeup(struct xdp_umem *umem)
{
struct xdp_sock *xs;
if (!(umem->need_wakeup & XDP_WAKEUP_TX))
return;
rcu_read_lock();
list_for_each_entry_rcu(xs, &umem->xsk_list, list) {
xs->tx->ring->flags &= ~XDP_RING_NEED_WAKEUP;
}
rcu_read_unlock();
umem->need_wakeup &= ~XDP_WAKEUP_TX;
}
EXPORT_SYMBOL(xsk_clear_tx_need_wakeup);
bool xsk_umem_uses_need_wakeup(struct xdp_umem *umem)
{
return umem->flags & XDP_UMEM_USES_NEED_WAKEUP;
}
EXPORT_SYMBOL(xsk_umem_uses_need_wakeup);
/* If a buffer crosses a page boundary, we need to do 2 memcpy's, one for
* each page. This is only required in copy mode.
*/
static void __xsk_rcv_memcpy(struct xdp_umem *umem, u64 addr, void *from_buf,
u32 len, u32 metalen)
{
void *to_buf = xdp_umem_get_data(umem, addr);
addr = xsk_umem_add_offset_to_addr(addr);
if (xskq_crosses_non_contig_pg(umem, addr, len + metalen)) {
void *next_pg_addr = umem->pages[(addr >> PAGE_SHIFT) + 1].addr;
u64 page_start = addr & ~(PAGE_SIZE - 1);
u64 first_len = PAGE_SIZE - (addr - page_start);
memcpy(to_buf, from_buf, first_len + metalen);
memcpy(next_pg_addr, from_buf + first_len, len - first_len);
return;
}
memcpy(to_buf, from_buf, len + metalen);
}
static int __xsk_rcv(struct xdp_sock *xs, struct xdp_buff *xdp, u32 len)
{
u64 offset = xs->umem->headroom;
u64 addr, memcpy_addr;
void *from_buf;
u32 metalen;
int err;
if (!xskq_peek_addr(xs->umem->fq, &addr, xs->umem) ||
len > xs->umem->chunk_size_nohr - XDP_PACKET_HEADROOM) {
xs->rx_dropped++;
return -ENOSPC;
}
if (unlikely(xdp_data_meta_unsupported(xdp))) {
from_buf = xdp->data;
metalen = 0;
} else {
from_buf = xdp->data_meta;
metalen = xdp->data - xdp->data_meta;
}
memcpy_addr = xsk_umem_adjust_offset(xs->umem, addr, offset);
__xsk_rcv_memcpy(xs->umem, memcpy_addr, from_buf, len, metalen);
offset += metalen;
addr = xsk_umem_adjust_offset(xs->umem, addr, offset);
xsk: new descriptor addressing scheme Currently, AF_XDP only supports a fixed frame-size memory scheme where each frame is referenced via an index (idx). A user passes the frame index to the kernel, and the kernel acts upon the data. Some NICs, however, do not have a fixed frame-size model, instead they have a model where a memory window is passed to the hardware and multiple frames are filled into that window (referred to as the "type-writer" model). By changing the descriptor format from the current frame index addressing scheme, AF_XDP can in the future be extended to support these kinds of NICs. In the index-based model, an idx refers to a frame of size frame_size. Addressing a frame in the UMEM is done by offseting the UMEM starting address by a global offset, idx * frame_size + offset. Communicating via the fill- and completion-rings are done by means of idx. In this commit, the idx is removed in favor of an address (addr), which is a relative address ranging over the UMEM. To convert an idx-based address to the new addr is simply: addr = idx * frame_size + offset. We also stop referring to the UMEM "frame" as a frame. Instead it is simply called a chunk. To transfer ownership of a chunk to the kernel, the addr of the chunk is passed in the fill-ring. Note, that the kernel will mask addr to make it chunk aligned, so there is no need for userspace to do that. E.g., for a chunk size of 2k, passing an addr of 2048, 2050 or 3000 to the fill-ring will refer to the same chunk. On the completion-ring, the addr will match that of the Tx descriptor, passed to the kernel. Changing the descriptor format to use chunks/addr will allow for future changes to move to a type-writer based model, where multiple frames can reside in one chunk. In this model passing one single chunk into the fill-ring, would potentially result in multiple Rx descriptors. This commit changes the uapi of AF_XDP sockets, and updates the documentation. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-04 14:57:13 +03:00
err = xskq_produce_batch_desc(xs->rx, addr, len);
if (!err) {
xsk: new descriptor addressing scheme Currently, AF_XDP only supports a fixed frame-size memory scheme where each frame is referenced via an index (idx). A user passes the frame index to the kernel, and the kernel acts upon the data. Some NICs, however, do not have a fixed frame-size model, instead they have a model where a memory window is passed to the hardware and multiple frames are filled into that window (referred to as the "type-writer" model). By changing the descriptor format from the current frame index addressing scheme, AF_XDP can in the future be extended to support these kinds of NICs. In the index-based model, an idx refers to a frame of size frame_size. Addressing a frame in the UMEM is done by offseting the UMEM starting address by a global offset, idx * frame_size + offset. Communicating via the fill- and completion-rings are done by means of idx. In this commit, the idx is removed in favor of an address (addr), which is a relative address ranging over the UMEM. To convert an idx-based address to the new addr is simply: addr = idx * frame_size + offset. We also stop referring to the UMEM "frame" as a frame. Instead it is simply called a chunk. To transfer ownership of a chunk to the kernel, the addr of the chunk is passed in the fill-ring. Note, that the kernel will mask addr to make it chunk aligned, so there is no need for userspace to do that. E.g., for a chunk size of 2k, passing an addr of 2048, 2050 or 3000 to the fill-ring will refer to the same chunk. On the completion-ring, the addr will match that of the Tx descriptor, passed to the kernel. Changing the descriptor format to use chunks/addr will allow for future changes to move to a type-writer based model, where multiple frames can reside in one chunk. In this model passing one single chunk into the fill-ring, would potentially result in multiple Rx descriptors. This commit changes the uapi of AF_XDP sockets, and updates the documentation. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-04 14:57:13 +03:00
xskq_discard_addr(xs->umem->fq);
xdp_return_buff(xdp);
return 0;
}
xs->rx_dropped++;
return err;
}
static int __xsk_rcv_zc(struct xdp_sock *xs, struct xdp_buff *xdp, u32 len)
{
int err = xskq_produce_batch_desc(xs->rx, (u64)xdp->handle, len);
if (err)
xs->rx_dropped++;
return err;
}
xsk: use state member for socket synchronization Prior the state variable was introduced by Ilya, the dev member was used to determine whether the socket was bound or not. However, when dev was read, proper SMP barriers and READ_ONCE were missing. In order to address the missing barriers and READ_ONCE, we start using the state variable as a point of synchronization. The state member read/write is paired with proper SMP barriers, and from this follows that the members described above does not need READ_ONCE if used in conjunction with state check. In all syscalls and the xsk_rcv path we check if state is XSK_BOUND. If that is the case we do a SMP read barrier, and this implies that the dev, umem and all rings are correctly setup. Note that no READ_ONCE are needed for these variable if used when state is XSK_BOUND (plus the read barrier). To summarize: The members struct xdp_sock members dev, queue_id, umem, fq, cq, tx, rx, and state were read lock-less, with incorrect barriers and missing {READ, WRITE}_ONCE. Now, umem, fq, cq, tx, rx, and state are read lock-less. When these members are updated, WRITE_ONCE is used. When read, READ_ONCE are only used when read outside the control mutex (e.g. mmap) or, not synchronized with the state member (XSK_BOUND plus smp_rmb()) Note that dev and queue_id do not need a WRITE_ONCE or READ_ONCE, due to the introduce state synchronization (XSK_BOUND plus smp_rmb()). Introducing the state check also fixes a race, found by syzcaller, in xsk_poll() where umem could be accessed when stale. Suggested-by: Hillf Danton <hdanton@sina.com> Reported-by: syzbot+c82697e3043781e08802@syzkaller.appspotmail.com Fixes: 77cd0d7b3f25 ("xsk: add support for need_wakeup flag in AF_XDP rings") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-04 14:49:12 +03:00
static bool xsk_is_bound(struct xdp_sock *xs)
{
if (READ_ONCE(xs->state) == XSK_BOUND) {
/* Matches smp_wmb() in bind(). */
smp_rmb();
return true;
}
return false;
}
int xsk_rcv(struct xdp_sock *xs, struct xdp_buff *xdp)
{
u32 len;
xsk: use state member for socket synchronization Prior the state variable was introduced by Ilya, the dev member was used to determine whether the socket was bound or not. However, when dev was read, proper SMP barriers and READ_ONCE were missing. In order to address the missing barriers and READ_ONCE, we start using the state variable as a point of synchronization. The state member read/write is paired with proper SMP barriers, and from this follows that the members described above does not need READ_ONCE if used in conjunction with state check. In all syscalls and the xsk_rcv path we check if state is XSK_BOUND. If that is the case we do a SMP read barrier, and this implies that the dev, umem and all rings are correctly setup. Note that no READ_ONCE are needed for these variable if used when state is XSK_BOUND (plus the read barrier). To summarize: The members struct xdp_sock members dev, queue_id, umem, fq, cq, tx, rx, and state were read lock-less, with incorrect barriers and missing {READ, WRITE}_ONCE. Now, umem, fq, cq, tx, rx, and state are read lock-less. When these members are updated, WRITE_ONCE is used. When read, READ_ONCE are only used when read outside the control mutex (e.g. mmap) or, not synchronized with the state member (XSK_BOUND plus smp_rmb()) Note that dev and queue_id do not need a WRITE_ONCE or READ_ONCE, due to the introduce state synchronization (XSK_BOUND plus smp_rmb()). Introducing the state check also fixes a race, found by syzcaller, in xsk_poll() where umem could be accessed when stale. Suggested-by: Hillf Danton <hdanton@sina.com> Reported-by: syzbot+c82697e3043781e08802@syzkaller.appspotmail.com Fixes: 77cd0d7b3f25 ("xsk: add support for need_wakeup flag in AF_XDP rings") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-04 14:49:12 +03:00
if (!xsk_is_bound(xs))
return -EINVAL;
if (xs->dev != xdp->rxq->dev || xs->queue_id != xdp->rxq->queue_index)
return -EINVAL;
len = xdp->data_end - xdp->data;
return (xdp->rxq->mem.type == MEM_TYPE_ZERO_COPY) ?
__xsk_rcv_zc(xs, xdp, len) : __xsk_rcv(xs, xdp, len);
}
void xsk_flush(struct xdp_sock *xs)
{
xskq_produce_flush_desc(xs->rx);
xs->sk.sk_data_ready(&xs->sk);
}
int xsk_generic_rcv(struct xdp_sock *xs, struct xdp_buff *xdp)
{
u32 metalen = xdp->data - xdp->data_meta;
u32 len = xdp->data_end - xdp->data;
u64 offset = xs->umem->headroom;
void *buffer;
u64 addr;
int err;
spin_lock_bh(&xs->rx_lock);
if (xs->dev != xdp->rxq->dev || xs->queue_id != xdp->rxq->queue_index) {
err = -EINVAL;
goto out_unlock;
}
if (!xskq_peek_addr(xs->umem->fq, &addr, xs->umem) ||
len > xs->umem->chunk_size_nohr - XDP_PACKET_HEADROOM) {
err = -ENOSPC;
goto out_drop;
}
addr = xsk_umem_adjust_offset(xs->umem, addr, offset);
buffer = xdp_umem_get_data(xs->umem, addr);
memcpy(buffer, xdp->data_meta, len + metalen);
addr = xsk_umem_adjust_offset(xs->umem, addr, metalen);
err = xskq_produce_batch_desc(xs->rx, addr, len);
if (err)
goto out_drop;
xskq_discard_addr(xs->umem->fq);
xskq_produce_flush_desc(xs->rx);
spin_unlock_bh(&xs->rx_lock);
xs->sk.sk_data_ready(&xs->sk);
return 0;
out_drop:
xs->rx_dropped++;
out_unlock:
spin_unlock_bh(&xs->rx_lock);
return err;
}
void xsk_umem_complete_tx(struct xdp_umem *umem, u32 nb_entries)
{
xskq_produce_flush_addr_n(umem->cq, nb_entries);
}
EXPORT_SYMBOL(xsk_umem_complete_tx);
void xsk_umem_consume_tx_done(struct xdp_umem *umem)
{
struct xdp_sock *xs;
rcu_read_lock();
list_for_each_entry_rcu(xs, &umem->xsk_list, list) {
xs->sk.sk_write_space(&xs->sk);
}
rcu_read_unlock();
}
EXPORT_SYMBOL(xsk_umem_consume_tx_done);
bool xsk_umem_consume_tx(struct xdp_umem *umem, struct xdp_desc *desc)
{
struct xdp_sock *xs;
rcu_read_lock();
list_for_each_entry_rcu(xs, &umem->xsk_list, list) {
if (!xskq_peek_desc(xs->tx, desc, umem))
continue;
if (xskq_produce_addr_lazy(umem->cq, desc->addr))
goto out;
xskq_discard_desc(xs->tx);
rcu_read_unlock();
return true;
}
out:
rcu_read_unlock();
return false;
}
EXPORT_SYMBOL(xsk_umem_consume_tx);
static int xsk_zc_xmit(struct xdp_sock *xs)
{
struct net_device *dev = xs->dev;
return dev->netdev_ops->ndo_xsk_wakeup(dev, xs->queue_id,
XDP_WAKEUP_TX);
}
static void xsk_destruct_skb(struct sk_buff *skb)
{
xsk: new descriptor addressing scheme Currently, AF_XDP only supports a fixed frame-size memory scheme where each frame is referenced via an index (idx). A user passes the frame index to the kernel, and the kernel acts upon the data. Some NICs, however, do not have a fixed frame-size model, instead they have a model where a memory window is passed to the hardware and multiple frames are filled into that window (referred to as the "type-writer" model). By changing the descriptor format from the current frame index addressing scheme, AF_XDP can in the future be extended to support these kinds of NICs. In the index-based model, an idx refers to a frame of size frame_size. Addressing a frame in the UMEM is done by offseting the UMEM starting address by a global offset, idx * frame_size + offset. Communicating via the fill- and completion-rings are done by means of idx. In this commit, the idx is removed in favor of an address (addr), which is a relative address ranging over the UMEM. To convert an idx-based address to the new addr is simply: addr = idx * frame_size + offset. We also stop referring to the UMEM "frame" as a frame. Instead it is simply called a chunk. To transfer ownership of a chunk to the kernel, the addr of the chunk is passed in the fill-ring. Note, that the kernel will mask addr to make it chunk aligned, so there is no need for userspace to do that. E.g., for a chunk size of 2k, passing an addr of 2048, 2050 or 3000 to the fill-ring will refer to the same chunk. On the completion-ring, the addr will match that of the Tx descriptor, passed to the kernel. Changing the descriptor format to use chunks/addr will allow for future changes to move to a type-writer based model, where multiple frames can reside in one chunk. In this model passing one single chunk into the fill-ring, would potentially result in multiple Rx descriptors. This commit changes the uapi of AF_XDP sockets, and updates the documentation. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-04 14:57:13 +03:00
u64 addr = (u64)(long)skb_shinfo(skb)->destructor_arg;
struct xdp_sock *xs = xdp_sk(skb->sk);
xsk: fix potential race in SKB TX completion code There is a potential race in the TX completion code for the SKB case. One process enters the sendmsg code of an AF_XDP socket in order to send a frame. The execution eventually trickles down to the driver that is told to send the packet. However, it decides to drop the packet due to some error condition (e.g., rings full) and frees the SKB. This will trigger the SKB destructor and a completion will be sent to the AF_XDP user space through its single-producer/single-consumer queues. At the same time a TX interrupt has fired on another core and it dispatches the TX completion code in the driver. It does its HW specific things and ends up freeing the SKB associated with the transmitted packet. This will trigger the SKB destructor and a completion will be sent to the AF_XDP user space through its single-producer/single-consumer queues. With a pseudo call stack, it would look like this: Core 1: sendmsg() being called in the application netdev_start_xmit() Driver entered through ndo_start_xmit Driver decides to free the SKB for some reason (e.g., rings full) Destructor of SKB called xskq_produce_addr() is called to signal completion to user space Core 2: TX completion irq NAPI loop Driver irq handler for TX completions Frees the SKB Destructor of SKB called xskq_produce_addr() is called to signal completion to user space We now have a violation of the single-producer/single-consumer principle for our queues as there are two threads trying to produce at the same time on the same queue. Fixed by introducing a spin_lock in the destructor. In regards to the performance, I get around 1.74 Mpps for txonly before and after the introduction of the spinlock. There is of course some impact due to the spin lock but it is in the less significant digits that are too noisy for me to measure. But let us say that the version without the spin lock got 1.745 Mpps in the best case and the version with 1.735 Mpps in the worst case, then that would mean a maximum drop in performance of 0.5%. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-06-29 10:48:20 +03:00
unsigned long flags;
xsk: fix potential race in SKB TX completion code There is a potential race in the TX completion code for the SKB case. One process enters the sendmsg code of an AF_XDP socket in order to send a frame. The execution eventually trickles down to the driver that is told to send the packet. However, it decides to drop the packet due to some error condition (e.g., rings full) and frees the SKB. This will trigger the SKB destructor and a completion will be sent to the AF_XDP user space through its single-producer/single-consumer queues. At the same time a TX interrupt has fired on another core and it dispatches the TX completion code in the driver. It does its HW specific things and ends up freeing the SKB associated with the transmitted packet. This will trigger the SKB destructor and a completion will be sent to the AF_XDP user space through its single-producer/single-consumer queues. With a pseudo call stack, it would look like this: Core 1: sendmsg() being called in the application netdev_start_xmit() Driver entered through ndo_start_xmit Driver decides to free the SKB for some reason (e.g., rings full) Destructor of SKB called xskq_produce_addr() is called to signal completion to user space Core 2: TX completion irq NAPI loop Driver irq handler for TX completions Frees the SKB Destructor of SKB called xskq_produce_addr() is called to signal completion to user space We now have a violation of the single-producer/single-consumer principle for our queues as there are two threads trying to produce at the same time on the same queue. Fixed by introducing a spin_lock in the destructor. In regards to the performance, I get around 1.74 Mpps for txonly before and after the introduction of the spinlock. There is of course some impact due to the spin lock but it is in the less significant digits that are too noisy for me to measure. But let us say that the version without the spin lock got 1.745 Mpps in the best case and the version with 1.735 Mpps in the worst case, then that would mean a maximum drop in performance of 0.5%. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-06-29 10:48:20 +03:00
spin_lock_irqsave(&xs->tx_completion_lock, flags);
xsk: new descriptor addressing scheme Currently, AF_XDP only supports a fixed frame-size memory scheme where each frame is referenced via an index (idx). A user passes the frame index to the kernel, and the kernel acts upon the data. Some NICs, however, do not have a fixed frame-size model, instead they have a model where a memory window is passed to the hardware and multiple frames are filled into that window (referred to as the "type-writer" model). By changing the descriptor format from the current frame index addressing scheme, AF_XDP can in the future be extended to support these kinds of NICs. In the index-based model, an idx refers to a frame of size frame_size. Addressing a frame in the UMEM is done by offseting the UMEM starting address by a global offset, idx * frame_size + offset. Communicating via the fill- and completion-rings are done by means of idx. In this commit, the idx is removed in favor of an address (addr), which is a relative address ranging over the UMEM. To convert an idx-based address to the new addr is simply: addr = idx * frame_size + offset. We also stop referring to the UMEM "frame" as a frame. Instead it is simply called a chunk. To transfer ownership of a chunk to the kernel, the addr of the chunk is passed in the fill-ring. Note, that the kernel will mask addr to make it chunk aligned, so there is no need for userspace to do that. E.g., for a chunk size of 2k, passing an addr of 2048, 2050 or 3000 to the fill-ring will refer to the same chunk. On the completion-ring, the addr will match that of the Tx descriptor, passed to the kernel. Changing the descriptor format to use chunks/addr will allow for future changes to move to a type-writer based model, where multiple frames can reside in one chunk. In this model passing one single chunk into the fill-ring, would potentially result in multiple Rx descriptors. This commit changes the uapi of AF_XDP sockets, and updates the documentation. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-04 14:57:13 +03:00
WARN_ON_ONCE(xskq_produce_addr(xs->umem->cq, addr));
xsk: fix potential race in SKB TX completion code There is a potential race in the TX completion code for the SKB case. One process enters the sendmsg code of an AF_XDP socket in order to send a frame. The execution eventually trickles down to the driver that is told to send the packet. However, it decides to drop the packet due to some error condition (e.g., rings full) and frees the SKB. This will trigger the SKB destructor and a completion will be sent to the AF_XDP user space through its single-producer/single-consumer queues. At the same time a TX interrupt has fired on another core and it dispatches the TX completion code in the driver. It does its HW specific things and ends up freeing the SKB associated with the transmitted packet. This will trigger the SKB destructor and a completion will be sent to the AF_XDP user space through its single-producer/single-consumer queues. With a pseudo call stack, it would look like this: Core 1: sendmsg() being called in the application netdev_start_xmit() Driver entered through ndo_start_xmit Driver decides to free the SKB for some reason (e.g., rings full) Destructor of SKB called xskq_produce_addr() is called to signal completion to user space Core 2: TX completion irq NAPI loop Driver irq handler for TX completions Frees the SKB Destructor of SKB called xskq_produce_addr() is called to signal completion to user space We now have a violation of the single-producer/single-consumer principle for our queues as there are two threads trying to produce at the same time on the same queue. Fixed by introducing a spin_lock in the destructor. In regards to the performance, I get around 1.74 Mpps for txonly before and after the introduction of the spinlock. There is of course some impact due to the spin lock but it is in the less significant digits that are too noisy for me to measure. But let us say that the version without the spin lock got 1.745 Mpps in the best case and the version with 1.735 Mpps in the worst case, then that would mean a maximum drop in performance of 0.5%. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-06-29 10:48:20 +03:00
spin_unlock_irqrestore(&xs->tx_completion_lock, flags);
sock_wfree(skb);
}
static int xsk_generic_xmit(struct sock *sk)
{
struct xdp_sock *xs = xdp_sk(sk);
u32 max_batch = TX_BATCH_SIZE;
bool sent_frame = false;
struct xdp_desc desc;
struct sk_buff *skb;
int err = 0;
mutex_lock(&xs->mutex);
if (xs->queue_id >= xs->dev->real_num_tx_queues)
goto out;
while (xskq_peek_desc(xs->tx, &desc, xs->umem)) {
char *buffer;
xsk: new descriptor addressing scheme Currently, AF_XDP only supports a fixed frame-size memory scheme where each frame is referenced via an index (idx). A user passes the frame index to the kernel, and the kernel acts upon the data. Some NICs, however, do not have a fixed frame-size model, instead they have a model where a memory window is passed to the hardware and multiple frames are filled into that window (referred to as the "type-writer" model). By changing the descriptor format from the current frame index addressing scheme, AF_XDP can in the future be extended to support these kinds of NICs. In the index-based model, an idx refers to a frame of size frame_size. Addressing a frame in the UMEM is done by offseting the UMEM starting address by a global offset, idx * frame_size + offset. Communicating via the fill- and completion-rings are done by means of idx. In this commit, the idx is removed in favor of an address (addr), which is a relative address ranging over the UMEM. To convert an idx-based address to the new addr is simply: addr = idx * frame_size + offset. We also stop referring to the UMEM "frame" as a frame. Instead it is simply called a chunk. To transfer ownership of a chunk to the kernel, the addr of the chunk is passed in the fill-ring. Note, that the kernel will mask addr to make it chunk aligned, so there is no need for userspace to do that. E.g., for a chunk size of 2k, passing an addr of 2048, 2050 or 3000 to the fill-ring will refer to the same chunk. On the completion-ring, the addr will match that of the Tx descriptor, passed to the kernel. Changing the descriptor format to use chunks/addr will allow for future changes to move to a type-writer based model, where multiple frames can reside in one chunk. In this model passing one single chunk into the fill-ring, would potentially result in multiple Rx descriptors. This commit changes the uapi of AF_XDP sockets, and updates the documentation. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-04 14:57:13 +03:00
u64 addr;
u32 len;
if (max_batch-- == 0) {
err = -EAGAIN;
goto out;
}
len = desc.len;
skb = sock_alloc_send_skb(sk, len, 1, &err);
if (unlikely(!skb)) {
err = -EAGAIN;
goto out;
}
skb_put(skb, len);
xsk: new descriptor addressing scheme Currently, AF_XDP only supports a fixed frame-size memory scheme where each frame is referenced via an index (idx). A user passes the frame index to the kernel, and the kernel acts upon the data. Some NICs, however, do not have a fixed frame-size model, instead they have a model where a memory window is passed to the hardware and multiple frames are filled into that window (referred to as the "type-writer" model). By changing the descriptor format from the current frame index addressing scheme, AF_XDP can in the future be extended to support these kinds of NICs. In the index-based model, an idx refers to a frame of size frame_size. Addressing a frame in the UMEM is done by offseting the UMEM starting address by a global offset, idx * frame_size + offset. Communicating via the fill- and completion-rings are done by means of idx. In this commit, the idx is removed in favor of an address (addr), which is a relative address ranging over the UMEM. To convert an idx-based address to the new addr is simply: addr = idx * frame_size + offset. We also stop referring to the UMEM "frame" as a frame. Instead it is simply called a chunk. To transfer ownership of a chunk to the kernel, the addr of the chunk is passed in the fill-ring. Note, that the kernel will mask addr to make it chunk aligned, so there is no need for userspace to do that. E.g., for a chunk size of 2k, passing an addr of 2048, 2050 or 3000 to the fill-ring will refer to the same chunk. On the completion-ring, the addr will match that of the Tx descriptor, passed to the kernel. Changing the descriptor format to use chunks/addr will allow for future changes to move to a type-writer based model, where multiple frames can reside in one chunk. In this model passing one single chunk into the fill-ring, would potentially result in multiple Rx descriptors. This commit changes the uapi of AF_XDP sockets, and updates the documentation. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-04 14:57:13 +03:00
addr = desc.addr;
buffer = xdp_umem_get_data(xs->umem, addr);
err = skb_store_bits(skb, 0, buffer, len);
if (unlikely(err) || xskq_reserve_addr(xs->umem->cq)) {
kfree_skb(skb);
goto out;
}
skb->dev = xs->dev;
skb->priority = sk->sk_priority;
skb->mark = sk->sk_mark;
skb_shinfo(skb)->destructor_arg = (void *)(long)desc.addr;
skb->destructor = xsk_destruct_skb;
err = dev_direct_xmit(skb, xs->queue_id);
xskq_discard_desc(xs->tx);
/* Ignore NET_XMIT_CN as packet might have been sent */
if (err == NET_XMIT_DROP || err == NETDEV_TX_BUSY) {
/* SKB completed but not sent */
err = -EBUSY;
goto out;
}
sent_frame = true;
}
out:
if (sent_frame)
sk->sk_write_space(sk);
mutex_unlock(&xs->mutex);
return err;
}
static int __xsk_sendmsg(struct sock *sk)
{
struct xdp_sock *xs = xdp_sk(sk);
if (unlikely(!(xs->dev->flags & IFF_UP)))
return -ENETDOWN;
if (unlikely(!xs->tx))
return -ENOBUFS;
return xs->zc ? xsk_zc_xmit(xs) : xsk_generic_xmit(sk);
}
static int xsk_sendmsg(struct socket *sock, struct msghdr *m, size_t total_len)
{
bool need_wait = !(m->msg_flags & MSG_DONTWAIT);
struct sock *sk = sock->sk;
struct xdp_sock *xs = xdp_sk(sk);
xsk: use state member for socket synchronization Prior the state variable was introduced by Ilya, the dev member was used to determine whether the socket was bound or not. However, when dev was read, proper SMP barriers and READ_ONCE were missing. In order to address the missing barriers and READ_ONCE, we start using the state variable as a point of synchronization. The state member read/write is paired with proper SMP barriers, and from this follows that the members described above does not need READ_ONCE if used in conjunction with state check. In all syscalls and the xsk_rcv path we check if state is XSK_BOUND. If that is the case we do a SMP read barrier, and this implies that the dev, umem and all rings are correctly setup. Note that no READ_ONCE are needed for these variable if used when state is XSK_BOUND (plus the read barrier). To summarize: The members struct xdp_sock members dev, queue_id, umem, fq, cq, tx, rx, and state were read lock-less, with incorrect barriers and missing {READ, WRITE}_ONCE. Now, umem, fq, cq, tx, rx, and state are read lock-less. When these members are updated, WRITE_ONCE is used. When read, READ_ONCE are only used when read outside the control mutex (e.g. mmap) or, not synchronized with the state member (XSK_BOUND plus smp_rmb()) Note that dev and queue_id do not need a WRITE_ONCE or READ_ONCE, due to the introduce state synchronization (XSK_BOUND plus smp_rmb()). Introducing the state check also fixes a race, found by syzcaller, in xsk_poll() where umem could be accessed when stale. Suggested-by: Hillf Danton <hdanton@sina.com> Reported-by: syzbot+c82697e3043781e08802@syzkaller.appspotmail.com Fixes: 77cd0d7b3f25 ("xsk: add support for need_wakeup flag in AF_XDP rings") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-04 14:49:12 +03:00
if (unlikely(!xsk_is_bound(xs)))
return -ENXIO;
if (unlikely(need_wait))
return -EOPNOTSUPP;
return __xsk_sendmsg(sk);
}
static unsigned int xsk_poll(struct file *file, struct socket *sock,
struct poll_table_struct *wait)
{
unsigned int mask = datagram_poll(file, sock, wait);
struct sock *sk = sock->sk;
struct xdp_sock *xs = xdp_sk(sk);
xsk: use state member for socket synchronization Prior the state variable was introduced by Ilya, the dev member was used to determine whether the socket was bound or not. However, when dev was read, proper SMP barriers and READ_ONCE were missing. In order to address the missing barriers and READ_ONCE, we start using the state variable as a point of synchronization. The state member read/write is paired with proper SMP barriers, and from this follows that the members described above does not need READ_ONCE if used in conjunction with state check. In all syscalls and the xsk_rcv path we check if state is XSK_BOUND. If that is the case we do a SMP read barrier, and this implies that the dev, umem and all rings are correctly setup. Note that no READ_ONCE are needed for these variable if used when state is XSK_BOUND (plus the read barrier). To summarize: The members struct xdp_sock members dev, queue_id, umem, fq, cq, tx, rx, and state were read lock-less, with incorrect barriers and missing {READ, WRITE}_ONCE. Now, umem, fq, cq, tx, rx, and state are read lock-less. When these members are updated, WRITE_ONCE is used. When read, READ_ONCE are only used when read outside the control mutex (e.g. mmap) or, not synchronized with the state member (XSK_BOUND plus smp_rmb()) Note that dev and queue_id do not need a WRITE_ONCE or READ_ONCE, due to the introduce state synchronization (XSK_BOUND plus smp_rmb()). Introducing the state check also fixes a race, found by syzcaller, in xsk_poll() where umem could be accessed when stale. Suggested-by: Hillf Danton <hdanton@sina.com> Reported-by: syzbot+c82697e3043781e08802@syzkaller.appspotmail.com Fixes: 77cd0d7b3f25 ("xsk: add support for need_wakeup flag in AF_XDP rings") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-04 14:49:12 +03:00
struct net_device *dev;
struct xdp_umem *umem;
if (unlikely(!xsk_is_bound(xs)))
return mask;
dev = xs->dev;
umem = xs->umem;
xsk: add support for need_wakeup flag in AF_XDP rings This commit adds support for a new flag called need_wakeup in the AF_XDP Tx and fill rings. When this flag is set, it means that the application has to explicitly wake up the kernel Rx (for the bit in the fill ring) or kernel Tx (for bit in the Tx ring) processing by issuing a syscall. Poll() can wake up both depending on the flags submitted and sendto() will wake up tx processing only. The main reason for introducing this new flag is to be able to efficiently support the case when application and driver is executing on the same core. Previously, the driver was just busy-spinning on the fill ring if it ran out of buffers in the HW and there were none on the fill ring. This approach works when the application is running on another core as it can replenish the fill ring while the driver is busy-spinning. Though, this is a lousy approach if both of them are running on the same core as the probability of the fill ring getting more entries when the driver is busy-spinning is zero. With this new feature the driver now sets the need_wakeup flag and returns to the application. The application can then replenish the fill queue and then explicitly wake up the Rx processing in the kernel using the syscall poll(). For Tx, the flag is only set to one if the driver has no outstanding Tx completion interrupts. If it has some, the flag is zero as it will be woken up by a completion interrupt anyway. As a nice side effect, this new flag also improves the performance of the case where application and driver are running on two different cores as it reduces the number of syscalls to the kernel. The kernel tells user space if it needs to be woken up by a syscall, and this eliminates many of the syscalls. This flag needs some simple driver support. If the driver does not support this, the Rx flag is always zero and the Tx flag is always one. This makes any application relying on this feature default to the old behaviour of not requiring any syscalls in the Rx path and always having to call sendto() in the Tx path. For backwards compatibility reasons, this feature has to be explicitly turned on using a new bind flag (XDP_USE_NEED_WAKEUP). I recommend that you always turn it on as it so far always have had a positive performance impact. The name and inspiration of the flag has been taken from io_uring by Jens Axboe. Details about this feature in io_uring can be found in http://kernel.dk/io_uring.pdf, section 8.3. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-14 10:27:17 +03:00
if (umem->need_wakeup) {
if (dev->netdev_ops->ndo_xsk_wakeup)
dev->netdev_ops->ndo_xsk_wakeup(dev, xs->queue_id,
umem->need_wakeup);
else
/* Poll needs to drive Tx also in copy mode */
__xsk_sendmsg(sk);
}
if (xs->rx && !xskq_empty_desc(xs->rx))
mask |= POLLIN | POLLRDNORM;
if (xs->tx && !xskq_full_desc(xs->tx))
mask |= POLLOUT | POLLWRNORM;
return mask;
}
static int xsk_init_queue(u32 entries, struct xsk_queue **queue,
bool umem_queue)
{
struct xsk_queue *q;
if (entries == 0 || *queue || !is_power_of_2(entries))
return -EINVAL;
q = xskq_create(entries, umem_queue);
if (!q)
return -ENOMEM;
/* Make sure queue is ready before it can be seen by others */
smp_wmb();
WRITE_ONCE(*queue, q);
return 0;
}
static void xsk_unbind_dev(struct xdp_sock *xs)
{
struct net_device *dev = xs->dev;
xsk: use state member for socket synchronization Prior the state variable was introduced by Ilya, the dev member was used to determine whether the socket was bound or not. However, when dev was read, proper SMP barriers and READ_ONCE were missing. In order to address the missing barriers and READ_ONCE, we start using the state variable as a point of synchronization. The state member read/write is paired with proper SMP barriers, and from this follows that the members described above does not need READ_ONCE if used in conjunction with state check. In all syscalls and the xsk_rcv path we check if state is XSK_BOUND. If that is the case we do a SMP read barrier, and this implies that the dev, umem and all rings are correctly setup. Note that no READ_ONCE are needed for these variable if used when state is XSK_BOUND (plus the read barrier). To summarize: The members struct xdp_sock members dev, queue_id, umem, fq, cq, tx, rx, and state were read lock-less, with incorrect barriers and missing {READ, WRITE}_ONCE. Now, umem, fq, cq, tx, rx, and state are read lock-less. When these members are updated, WRITE_ONCE is used. When read, READ_ONCE are only used when read outside the control mutex (e.g. mmap) or, not synchronized with the state member (XSK_BOUND plus smp_rmb()) Note that dev and queue_id do not need a WRITE_ONCE or READ_ONCE, due to the introduce state synchronization (XSK_BOUND plus smp_rmb()). Introducing the state check also fixes a race, found by syzcaller, in xsk_poll() where umem could be accessed when stale. Suggested-by: Hillf Danton <hdanton@sina.com> Reported-by: syzbot+c82697e3043781e08802@syzkaller.appspotmail.com Fixes: 77cd0d7b3f25 ("xsk: add support for need_wakeup flag in AF_XDP rings") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-04 14:49:12 +03:00
if (xs->state != XSK_BOUND)
return;
xsk: use state member for socket synchronization Prior the state variable was introduced by Ilya, the dev member was used to determine whether the socket was bound or not. However, when dev was read, proper SMP barriers and READ_ONCE were missing. In order to address the missing barriers and READ_ONCE, we start using the state variable as a point of synchronization. The state member read/write is paired with proper SMP barriers, and from this follows that the members described above does not need READ_ONCE if used in conjunction with state check. In all syscalls and the xsk_rcv path we check if state is XSK_BOUND. If that is the case we do a SMP read barrier, and this implies that the dev, umem and all rings are correctly setup. Note that no READ_ONCE are needed for these variable if used when state is XSK_BOUND (plus the read barrier). To summarize: The members struct xdp_sock members dev, queue_id, umem, fq, cq, tx, rx, and state were read lock-less, with incorrect barriers and missing {READ, WRITE}_ONCE. Now, umem, fq, cq, tx, rx, and state are read lock-less. When these members are updated, WRITE_ONCE is used. When read, READ_ONCE are only used when read outside the control mutex (e.g. mmap) or, not synchronized with the state member (XSK_BOUND plus smp_rmb()) Note that dev and queue_id do not need a WRITE_ONCE or READ_ONCE, due to the introduce state synchronization (XSK_BOUND plus smp_rmb()). Introducing the state check also fixes a race, found by syzcaller, in xsk_poll() where umem could be accessed when stale. Suggested-by: Hillf Danton <hdanton@sina.com> Reported-by: syzbot+c82697e3043781e08802@syzkaller.appspotmail.com Fixes: 77cd0d7b3f25 ("xsk: add support for need_wakeup flag in AF_XDP rings") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-04 14:49:12 +03:00
WRITE_ONCE(xs->state, XSK_UNBOUND);
/* Wait for driver to stop using the xdp socket. */
xdp_del_sk_umem(xs->umem, xs);
xs->dev = NULL;
synchronize_net();
dev_put(dev);
}
static struct xsk_map *xsk_get_map_list_entry(struct xdp_sock *xs,
struct xdp_sock ***map_entry)
{
struct xsk_map *map = NULL;
struct xsk_map_node *node;
*map_entry = NULL;
spin_lock_bh(&xs->map_list_lock);
node = list_first_entry_or_null(&xs->map_list, struct xsk_map_node,
node);
if (node) {
WARN_ON(xsk_map_inc(node->map));
map = node->map;
*map_entry = node->map_entry;
}
spin_unlock_bh(&xs->map_list_lock);
return map;
}
static void xsk_delete_from_maps(struct xdp_sock *xs)
{
/* This function removes the current XDP socket from all the
* maps it resides in. We need to take extra care here, due to
* the two locks involved. Each map has a lock synchronizing
* updates to the entries, and each socket has a lock that
* synchronizes access to the list of maps (map_list). For
* deadlock avoidance the locks need to be taken in the order
* "map lock"->"socket map list lock". We start off by
* accessing the socket map list, and take a reference to the
* map to guarantee existence between the
* xsk_get_map_list_entry() and xsk_map_try_sock_delete()
* calls. Then we ask the map to remove the socket, which
* tries to remove the socket from the map. Note that there
* might be updates to the map between
* xsk_get_map_list_entry() and xsk_map_try_sock_delete().
*/
struct xdp_sock **map_entry = NULL;
struct xsk_map *map;
while ((map = xsk_get_map_list_entry(xs, &map_entry))) {
xsk_map_try_sock_delete(map, xs, map_entry);
xsk_map_put(map);
}
}
static int xsk_release(struct socket *sock)
{
struct sock *sk = sock->sk;
struct xdp_sock *xs = xdp_sk(sk);
struct net *net;
if (!sk)
return 0;
net = sock_net(sk);
mutex_lock(&net->xdp.lock);
sk_del_node_init_rcu(sk);
mutex_unlock(&net->xdp.lock);
local_bh_disable();
sock_prot_inuse_add(net, sk->sk_prot, -1);
local_bh_enable();
xsk_delete_from_maps(xs);
xsk: use state member for socket synchronization Prior the state variable was introduced by Ilya, the dev member was used to determine whether the socket was bound or not. However, when dev was read, proper SMP barriers and READ_ONCE were missing. In order to address the missing barriers and READ_ONCE, we start using the state variable as a point of synchronization. The state member read/write is paired with proper SMP barriers, and from this follows that the members described above does not need READ_ONCE if used in conjunction with state check. In all syscalls and the xsk_rcv path we check if state is XSK_BOUND. If that is the case we do a SMP read barrier, and this implies that the dev, umem and all rings are correctly setup. Note that no READ_ONCE are needed for these variable if used when state is XSK_BOUND (plus the read barrier). To summarize: The members struct xdp_sock members dev, queue_id, umem, fq, cq, tx, rx, and state were read lock-less, with incorrect barriers and missing {READ, WRITE}_ONCE. Now, umem, fq, cq, tx, rx, and state are read lock-less. When these members are updated, WRITE_ONCE is used. When read, READ_ONCE are only used when read outside the control mutex (e.g. mmap) or, not synchronized with the state member (XSK_BOUND plus smp_rmb()) Note that dev and queue_id do not need a WRITE_ONCE or READ_ONCE, due to the introduce state synchronization (XSK_BOUND plus smp_rmb()). Introducing the state check also fixes a race, found by syzcaller, in xsk_poll() where umem could be accessed when stale. Suggested-by: Hillf Danton <hdanton@sina.com> Reported-by: syzbot+c82697e3043781e08802@syzkaller.appspotmail.com Fixes: 77cd0d7b3f25 ("xsk: add support for need_wakeup flag in AF_XDP rings") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-04 14:49:12 +03:00
mutex_lock(&xs->mutex);
xsk_unbind_dev(xs);
xsk: use state member for socket synchronization Prior the state variable was introduced by Ilya, the dev member was used to determine whether the socket was bound or not. However, when dev was read, proper SMP barriers and READ_ONCE were missing. In order to address the missing barriers and READ_ONCE, we start using the state variable as a point of synchronization. The state member read/write is paired with proper SMP barriers, and from this follows that the members described above does not need READ_ONCE if used in conjunction with state check. In all syscalls and the xsk_rcv path we check if state is XSK_BOUND. If that is the case we do a SMP read barrier, and this implies that the dev, umem and all rings are correctly setup. Note that no READ_ONCE are needed for these variable if used when state is XSK_BOUND (plus the read barrier). To summarize: The members struct xdp_sock members dev, queue_id, umem, fq, cq, tx, rx, and state were read lock-less, with incorrect barriers and missing {READ, WRITE}_ONCE. Now, umem, fq, cq, tx, rx, and state are read lock-less. When these members are updated, WRITE_ONCE is used. When read, READ_ONCE are only used when read outside the control mutex (e.g. mmap) or, not synchronized with the state member (XSK_BOUND plus smp_rmb()) Note that dev and queue_id do not need a WRITE_ONCE or READ_ONCE, due to the introduce state synchronization (XSK_BOUND plus smp_rmb()). Introducing the state check also fixes a race, found by syzcaller, in xsk_poll() where umem could be accessed when stale. Suggested-by: Hillf Danton <hdanton@sina.com> Reported-by: syzbot+c82697e3043781e08802@syzkaller.appspotmail.com Fixes: 77cd0d7b3f25 ("xsk: add support for need_wakeup flag in AF_XDP rings") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-04 14:49:12 +03:00
mutex_unlock(&xs->mutex);
xskq_destroy(xs->rx);
xskq_destroy(xs->tx);
sock_orphan(sk);
sock->sk = NULL;
sk_refcnt_debug_release(sk);
sock_put(sk);
return 0;
}
static struct socket *xsk_lookup_xsk_from_fd(int fd)
{
struct socket *sock;
int err;
sock = sockfd_lookup(fd, &err);
if (!sock)
return ERR_PTR(-ENOTSOCK);
if (sock->sk->sk_family != PF_XDP) {
sockfd_put(sock);
return ERR_PTR(-ENOPROTOOPT);
}
return sock;
}
/* Check if umem pages are contiguous.
* If zero-copy mode, use the DMA address to do the page contiguity check
* For all other modes we use addr (kernel virtual address)
* Store the result in the low bits of addr.
*/
static void xsk_check_page_contiguity(struct xdp_umem *umem, u32 flags)
{
struct xdp_umem_page *pgs = umem->pages;
int i, is_contig;
for (i = 0; i < umem->npgs - 1; i++) {
is_contig = (flags & XDP_ZEROCOPY) ?
(pgs[i].dma + PAGE_SIZE == pgs[i + 1].dma) :
(pgs[i].addr + PAGE_SIZE == pgs[i + 1].addr);
pgs[i].addr += is_contig << XSK_NEXT_PG_CONTIG_SHIFT;
}
}
static int xsk_bind(struct socket *sock, struct sockaddr *addr, int addr_len)
{
struct sockaddr_xdp *sxdp = (struct sockaddr_xdp *)addr;
struct sock *sk = sock->sk;
struct xdp_sock *xs = xdp_sk(sk);
struct net_device *dev;
u32 flags, qid;
int err = 0;
if (addr_len < sizeof(struct sockaddr_xdp))
return -EINVAL;
if (sxdp->sxdp_family != AF_XDP)
return -EINVAL;
flags = sxdp->sxdp_flags;
xsk: add support for need_wakeup flag in AF_XDP rings This commit adds support for a new flag called need_wakeup in the AF_XDP Tx and fill rings. When this flag is set, it means that the application has to explicitly wake up the kernel Rx (for the bit in the fill ring) or kernel Tx (for bit in the Tx ring) processing by issuing a syscall. Poll() can wake up both depending on the flags submitted and sendto() will wake up tx processing only. The main reason for introducing this new flag is to be able to efficiently support the case when application and driver is executing on the same core. Previously, the driver was just busy-spinning on the fill ring if it ran out of buffers in the HW and there were none on the fill ring. This approach works when the application is running on another core as it can replenish the fill ring while the driver is busy-spinning. Though, this is a lousy approach if both of them are running on the same core as the probability of the fill ring getting more entries when the driver is busy-spinning is zero. With this new feature the driver now sets the need_wakeup flag and returns to the application. The application can then replenish the fill queue and then explicitly wake up the Rx processing in the kernel using the syscall poll(). For Tx, the flag is only set to one if the driver has no outstanding Tx completion interrupts. If it has some, the flag is zero as it will be woken up by a completion interrupt anyway. As a nice side effect, this new flag also improves the performance of the case where application and driver are running on two different cores as it reduces the number of syscalls to the kernel. The kernel tells user space if it needs to be woken up by a syscall, and this eliminates many of the syscalls. This flag needs some simple driver support. If the driver does not support this, the Rx flag is always zero and the Tx flag is always one. This makes any application relying on this feature default to the old behaviour of not requiring any syscalls in the Rx path and always having to call sendto() in the Tx path. For backwards compatibility reasons, this feature has to be explicitly turned on using a new bind flag (XDP_USE_NEED_WAKEUP). I recommend that you always turn it on as it so far always have had a positive performance impact. The name and inspiration of the flag has been taken from io_uring by Jens Axboe. Details about this feature in io_uring can be found in http://kernel.dk/io_uring.pdf, section 8.3. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-14 10:27:17 +03:00
if (flags & ~(XDP_SHARED_UMEM | XDP_COPY | XDP_ZEROCOPY |
XDP_USE_NEED_WAKEUP))
return -EINVAL;
rtnl_lock();
mutex_lock(&xs->mutex);
if (xs->state != XSK_READY) {
err = -EBUSY;
goto out_release;
}
dev = dev_get_by_index(sock_net(sk), sxdp->sxdp_ifindex);
if (!dev) {
err = -ENODEV;
goto out_release;
}
if (!xs->rx && !xs->tx) {
err = -EINVAL;
goto out_unlock;
}
qid = sxdp->sxdp_queue_id;
if (flags & XDP_SHARED_UMEM) {
struct xdp_sock *umem_xs;
struct socket *sock;
xsk: add support for need_wakeup flag in AF_XDP rings This commit adds support for a new flag called need_wakeup in the AF_XDP Tx and fill rings. When this flag is set, it means that the application has to explicitly wake up the kernel Rx (for the bit in the fill ring) or kernel Tx (for bit in the Tx ring) processing by issuing a syscall. Poll() can wake up both depending on the flags submitted and sendto() will wake up tx processing only. The main reason for introducing this new flag is to be able to efficiently support the case when application and driver is executing on the same core. Previously, the driver was just busy-spinning on the fill ring if it ran out of buffers in the HW and there were none on the fill ring. This approach works when the application is running on another core as it can replenish the fill ring while the driver is busy-spinning. Though, this is a lousy approach if both of them are running on the same core as the probability of the fill ring getting more entries when the driver is busy-spinning is zero. With this new feature the driver now sets the need_wakeup flag and returns to the application. The application can then replenish the fill queue and then explicitly wake up the Rx processing in the kernel using the syscall poll(). For Tx, the flag is only set to one if the driver has no outstanding Tx completion interrupts. If it has some, the flag is zero as it will be woken up by a completion interrupt anyway. As a nice side effect, this new flag also improves the performance of the case where application and driver are running on two different cores as it reduces the number of syscalls to the kernel. The kernel tells user space if it needs to be woken up by a syscall, and this eliminates many of the syscalls. This flag needs some simple driver support. If the driver does not support this, the Rx flag is always zero and the Tx flag is always one. This makes any application relying on this feature default to the old behaviour of not requiring any syscalls in the Rx path and always having to call sendto() in the Tx path. For backwards compatibility reasons, this feature has to be explicitly turned on using a new bind flag (XDP_USE_NEED_WAKEUP). I recommend that you always turn it on as it so far always have had a positive performance impact. The name and inspiration of the flag has been taken from io_uring by Jens Axboe. Details about this feature in io_uring can be found in http://kernel.dk/io_uring.pdf, section 8.3. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-14 10:27:17 +03:00
if ((flags & XDP_COPY) || (flags & XDP_ZEROCOPY) ||
(flags & XDP_USE_NEED_WAKEUP)) {
/* Cannot specify flags for shared sockets. */
err = -EINVAL;
goto out_unlock;
}
if (xs->umem) {
/* We have already our own. */
err = -EINVAL;
goto out_unlock;
}
sock = xsk_lookup_xsk_from_fd(sxdp->sxdp_shared_umem_fd);
if (IS_ERR(sock)) {
err = PTR_ERR(sock);
goto out_unlock;
}
umem_xs = xdp_sk(sock->sk);
xsk: use state member for socket synchronization Prior the state variable was introduced by Ilya, the dev member was used to determine whether the socket was bound or not. However, when dev was read, proper SMP barriers and READ_ONCE were missing. In order to address the missing barriers and READ_ONCE, we start using the state variable as a point of synchronization. The state member read/write is paired with proper SMP barriers, and from this follows that the members described above does not need READ_ONCE if used in conjunction with state check. In all syscalls and the xsk_rcv path we check if state is XSK_BOUND. If that is the case we do a SMP read barrier, and this implies that the dev, umem and all rings are correctly setup. Note that no READ_ONCE are needed for these variable if used when state is XSK_BOUND (plus the read barrier). To summarize: The members struct xdp_sock members dev, queue_id, umem, fq, cq, tx, rx, and state were read lock-less, with incorrect barriers and missing {READ, WRITE}_ONCE. Now, umem, fq, cq, tx, rx, and state are read lock-less. When these members are updated, WRITE_ONCE is used. When read, READ_ONCE are only used when read outside the control mutex (e.g. mmap) or, not synchronized with the state member (XSK_BOUND plus smp_rmb()) Note that dev and queue_id do not need a WRITE_ONCE or READ_ONCE, due to the introduce state synchronization (XSK_BOUND plus smp_rmb()). Introducing the state check also fixes a race, found by syzcaller, in xsk_poll() where umem could be accessed when stale. Suggested-by: Hillf Danton <hdanton@sina.com> Reported-by: syzbot+c82697e3043781e08802@syzkaller.appspotmail.com Fixes: 77cd0d7b3f25 ("xsk: add support for need_wakeup flag in AF_XDP rings") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-04 14:49:12 +03:00
if (!xsk_is_bound(umem_xs)) {
err = -EBADF;
sockfd_put(sock);
goto out_unlock;
xsk: use state member for socket synchronization Prior the state variable was introduced by Ilya, the dev member was used to determine whether the socket was bound or not. However, when dev was read, proper SMP barriers and READ_ONCE were missing. In order to address the missing barriers and READ_ONCE, we start using the state variable as a point of synchronization. The state member read/write is paired with proper SMP barriers, and from this follows that the members described above does not need READ_ONCE if used in conjunction with state check. In all syscalls and the xsk_rcv path we check if state is XSK_BOUND. If that is the case we do a SMP read barrier, and this implies that the dev, umem and all rings are correctly setup. Note that no READ_ONCE are needed for these variable if used when state is XSK_BOUND (plus the read barrier). To summarize: The members struct xdp_sock members dev, queue_id, umem, fq, cq, tx, rx, and state were read lock-less, with incorrect barriers and missing {READ, WRITE}_ONCE. Now, umem, fq, cq, tx, rx, and state are read lock-less. When these members are updated, WRITE_ONCE is used. When read, READ_ONCE are only used when read outside the control mutex (e.g. mmap) or, not synchronized with the state member (XSK_BOUND plus smp_rmb()) Note that dev and queue_id do not need a WRITE_ONCE or READ_ONCE, due to the introduce state synchronization (XSK_BOUND plus smp_rmb()). Introducing the state check also fixes a race, found by syzcaller, in xsk_poll() where umem could be accessed when stale. Suggested-by: Hillf Danton <hdanton@sina.com> Reported-by: syzbot+c82697e3043781e08802@syzkaller.appspotmail.com Fixes: 77cd0d7b3f25 ("xsk: add support for need_wakeup flag in AF_XDP rings") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-04 14:49:12 +03:00
}
if (umem_xs->dev != dev || umem_xs->queue_id != qid) {
err = -EINVAL;
sockfd_put(sock);
goto out_unlock;
}
xdp_get_umem(umem_xs->umem);
WRITE_ONCE(xs->umem, umem_xs->umem);
sockfd_put(sock);
} else if (!xs->umem || !xdp_umem_validate_queues(xs->umem)) {
err = -EINVAL;
goto out_unlock;
} else {
/* This xsk has its own umem. */
xskq_set_umem(xs->umem->fq, xs->umem->size,
xs->umem->chunk_mask);
xskq_set_umem(xs->umem->cq, xs->umem->size,
xs->umem->chunk_mask);
err = xdp_umem_assign_dev(xs->umem, dev, qid, flags);
if (err)
goto out_unlock;
xsk_check_page_contiguity(xs->umem, flags);
}
xs->dev = dev;
xs->zc = xs->umem->zc;
xs->queue_id = qid;
xskq_set_umem(xs->rx, xs->umem->size, xs->umem->chunk_mask);
xskq_set_umem(xs->tx, xs->umem->size, xs->umem->chunk_mask);
xdp_add_sk_umem(xs->umem, xs);
out_unlock:
xsk: use state member for socket synchronization Prior the state variable was introduced by Ilya, the dev member was used to determine whether the socket was bound or not. However, when dev was read, proper SMP barriers and READ_ONCE were missing. In order to address the missing barriers and READ_ONCE, we start using the state variable as a point of synchronization. The state member read/write is paired with proper SMP barriers, and from this follows that the members described above does not need READ_ONCE if used in conjunction with state check. In all syscalls and the xsk_rcv path we check if state is XSK_BOUND. If that is the case we do a SMP read barrier, and this implies that the dev, umem and all rings are correctly setup. Note that no READ_ONCE are needed for these variable if used when state is XSK_BOUND (plus the read barrier). To summarize: The members struct xdp_sock members dev, queue_id, umem, fq, cq, tx, rx, and state were read lock-less, with incorrect barriers and missing {READ, WRITE}_ONCE. Now, umem, fq, cq, tx, rx, and state are read lock-less. When these members are updated, WRITE_ONCE is used. When read, READ_ONCE are only used when read outside the control mutex (e.g. mmap) or, not synchronized with the state member (XSK_BOUND plus smp_rmb()) Note that dev and queue_id do not need a WRITE_ONCE or READ_ONCE, due to the introduce state synchronization (XSK_BOUND plus smp_rmb()). Introducing the state check also fixes a race, found by syzcaller, in xsk_poll() where umem could be accessed when stale. Suggested-by: Hillf Danton <hdanton@sina.com> Reported-by: syzbot+c82697e3043781e08802@syzkaller.appspotmail.com Fixes: 77cd0d7b3f25 ("xsk: add support for need_wakeup flag in AF_XDP rings") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-04 14:49:12 +03:00
if (err) {
dev_put(dev);
xsk: use state member for socket synchronization Prior the state variable was introduced by Ilya, the dev member was used to determine whether the socket was bound or not. However, when dev was read, proper SMP barriers and READ_ONCE were missing. In order to address the missing barriers and READ_ONCE, we start using the state variable as a point of synchronization. The state member read/write is paired with proper SMP barriers, and from this follows that the members described above does not need READ_ONCE if used in conjunction with state check. In all syscalls and the xsk_rcv path we check if state is XSK_BOUND. If that is the case we do a SMP read barrier, and this implies that the dev, umem and all rings are correctly setup. Note that no READ_ONCE are needed for these variable if used when state is XSK_BOUND (plus the read barrier). To summarize: The members struct xdp_sock members dev, queue_id, umem, fq, cq, tx, rx, and state were read lock-less, with incorrect barriers and missing {READ, WRITE}_ONCE. Now, umem, fq, cq, tx, rx, and state are read lock-less. When these members are updated, WRITE_ONCE is used. When read, READ_ONCE are only used when read outside the control mutex (e.g. mmap) or, not synchronized with the state member (XSK_BOUND plus smp_rmb()) Note that dev and queue_id do not need a WRITE_ONCE or READ_ONCE, due to the introduce state synchronization (XSK_BOUND plus smp_rmb()). Introducing the state check also fixes a race, found by syzcaller, in xsk_poll() where umem could be accessed when stale. Suggested-by: Hillf Danton <hdanton@sina.com> Reported-by: syzbot+c82697e3043781e08802@syzkaller.appspotmail.com Fixes: 77cd0d7b3f25 ("xsk: add support for need_wakeup flag in AF_XDP rings") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-04 14:49:12 +03:00
} else {
/* Matches smp_rmb() in bind() for shared umem
* sockets, and xsk_is_bound().
*/
smp_wmb();
WRITE_ONCE(xs->state, XSK_BOUND);
}
out_release:
mutex_unlock(&xs->mutex);
rtnl_unlock();
return err;
}
struct xdp_umem_reg_v1 {
__u64 addr; /* Start of packet data area */
__u64 len; /* Length of packet data area */
__u32 chunk_size;
__u32 headroom;
};
static int xsk_setsockopt(struct socket *sock, int level, int optname,
char __user *optval, unsigned int optlen)
{
struct sock *sk = sock->sk;
struct xdp_sock *xs = xdp_sk(sk);
int err;
if (level != SOL_XDP)
return -ENOPROTOOPT;
switch (optname) {
case XDP_RX_RING:
case XDP_TX_RING:
{
struct xsk_queue **q;
int entries;
if (optlen < sizeof(entries))
return -EINVAL;
if (copy_from_user(&entries, optval, sizeof(entries)))
return -EFAULT;
mutex_lock(&xs->mutex);
if (xs->state != XSK_READY) {
mutex_unlock(&xs->mutex);
return -EBUSY;
}
q = (optname == XDP_TX_RING) ? &xs->tx : &xs->rx;
err = xsk_init_queue(entries, q, false);
xsk: add support for need_wakeup flag in AF_XDP rings This commit adds support for a new flag called need_wakeup in the AF_XDP Tx and fill rings. When this flag is set, it means that the application has to explicitly wake up the kernel Rx (for the bit in the fill ring) or kernel Tx (for bit in the Tx ring) processing by issuing a syscall. Poll() can wake up both depending on the flags submitted and sendto() will wake up tx processing only. The main reason for introducing this new flag is to be able to efficiently support the case when application and driver is executing on the same core. Previously, the driver was just busy-spinning on the fill ring if it ran out of buffers in the HW and there were none on the fill ring. This approach works when the application is running on another core as it can replenish the fill ring while the driver is busy-spinning. Though, this is a lousy approach if both of them are running on the same core as the probability of the fill ring getting more entries when the driver is busy-spinning is zero. With this new feature the driver now sets the need_wakeup flag and returns to the application. The application can then replenish the fill queue and then explicitly wake up the Rx processing in the kernel using the syscall poll(). For Tx, the flag is only set to one if the driver has no outstanding Tx completion interrupts. If it has some, the flag is zero as it will be woken up by a completion interrupt anyway. As a nice side effect, this new flag also improves the performance of the case where application and driver are running on two different cores as it reduces the number of syscalls to the kernel. The kernel tells user space if it needs to be woken up by a syscall, and this eliminates many of the syscalls. This flag needs some simple driver support. If the driver does not support this, the Rx flag is always zero and the Tx flag is always one. This makes any application relying on this feature default to the old behaviour of not requiring any syscalls in the Rx path and always having to call sendto() in the Tx path. For backwards compatibility reasons, this feature has to be explicitly turned on using a new bind flag (XDP_USE_NEED_WAKEUP). I recommend that you always turn it on as it so far always have had a positive performance impact. The name and inspiration of the flag has been taken from io_uring by Jens Axboe. Details about this feature in io_uring can be found in http://kernel.dk/io_uring.pdf, section 8.3. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-14 10:27:17 +03:00
if (!err && optname == XDP_TX_RING)
/* Tx needs to be explicitly woken up the first time */
xs->tx->ring->flags |= XDP_RING_NEED_WAKEUP;
mutex_unlock(&xs->mutex);
return err;
}
case XDP_UMEM_REG:
{
size_t mr_size = sizeof(struct xdp_umem_reg);
struct xdp_umem_reg mr = {};
struct xdp_umem *umem;
if (optlen < sizeof(struct xdp_umem_reg_v1))
return -EINVAL;
else if (optlen < sizeof(mr))
mr_size = sizeof(struct xdp_umem_reg_v1);
if (copy_from_user(&mr, optval, mr_size))
return -EFAULT;
mutex_lock(&xs->mutex);
if (xs->state != XSK_READY || xs->umem) {
mutex_unlock(&xs->mutex);
return -EBUSY;
}
umem = xdp_umem_create(&mr);
if (IS_ERR(umem)) {
mutex_unlock(&xs->mutex);
return PTR_ERR(umem);
}
/* Make sure umem is ready before it can be seen by others */
smp_wmb();
WRITE_ONCE(xs->umem, umem);
mutex_unlock(&xs->mutex);
return 0;
}
case XDP_UMEM_FILL_RING:
case XDP_UMEM_COMPLETION_RING:
{
struct xsk_queue **q;
int entries;
if (copy_from_user(&entries, optval, sizeof(entries)))
return -EFAULT;
mutex_lock(&xs->mutex);
if (xs->state != XSK_READY) {
mutex_unlock(&xs->mutex);
return -EBUSY;
}
if (!xs->umem) {
mutex_unlock(&xs->mutex);
return -EINVAL;
}
q = (optname == XDP_UMEM_FILL_RING) ? &xs->umem->fq :
&xs->umem->cq;
err = xsk_init_queue(entries, q, true);
mutex_unlock(&xs->mutex);
return err;
}
default:
break;
}
return -ENOPROTOOPT;
}
xsk: add support for need_wakeup flag in AF_XDP rings This commit adds support for a new flag called need_wakeup in the AF_XDP Tx and fill rings. When this flag is set, it means that the application has to explicitly wake up the kernel Rx (for the bit in the fill ring) or kernel Tx (for bit in the Tx ring) processing by issuing a syscall. Poll() can wake up both depending on the flags submitted and sendto() will wake up tx processing only. The main reason for introducing this new flag is to be able to efficiently support the case when application and driver is executing on the same core. Previously, the driver was just busy-spinning on the fill ring if it ran out of buffers in the HW and there were none on the fill ring. This approach works when the application is running on another core as it can replenish the fill ring while the driver is busy-spinning. Though, this is a lousy approach if both of them are running on the same core as the probability of the fill ring getting more entries when the driver is busy-spinning is zero. With this new feature the driver now sets the need_wakeup flag and returns to the application. The application can then replenish the fill queue and then explicitly wake up the Rx processing in the kernel using the syscall poll(). For Tx, the flag is only set to one if the driver has no outstanding Tx completion interrupts. If it has some, the flag is zero as it will be woken up by a completion interrupt anyway. As a nice side effect, this new flag also improves the performance of the case where application and driver are running on two different cores as it reduces the number of syscalls to the kernel. The kernel tells user space if it needs to be woken up by a syscall, and this eliminates many of the syscalls. This flag needs some simple driver support. If the driver does not support this, the Rx flag is always zero and the Tx flag is always one. This makes any application relying on this feature default to the old behaviour of not requiring any syscalls in the Rx path and always having to call sendto() in the Tx path. For backwards compatibility reasons, this feature has to be explicitly turned on using a new bind flag (XDP_USE_NEED_WAKEUP). I recommend that you always turn it on as it so far always have had a positive performance impact. The name and inspiration of the flag has been taken from io_uring by Jens Axboe. Details about this feature in io_uring can be found in http://kernel.dk/io_uring.pdf, section 8.3. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-14 10:27:17 +03:00
static void xsk_enter_rxtx_offsets(struct xdp_ring_offset_v1 *ring)
{
ring->producer = offsetof(struct xdp_rxtx_ring, ptrs.producer);
ring->consumer = offsetof(struct xdp_rxtx_ring, ptrs.consumer);
ring->desc = offsetof(struct xdp_rxtx_ring, desc);
}
static void xsk_enter_umem_offsets(struct xdp_ring_offset_v1 *ring)
{
ring->producer = offsetof(struct xdp_umem_ring, ptrs.producer);
ring->consumer = offsetof(struct xdp_umem_ring, ptrs.consumer);
ring->desc = offsetof(struct xdp_umem_ring, desc);
}
static int xsk_getsockopt(struct socket *sock, int level, int optname,
char __user *optval, int __user *optlen)
{
struct sock *sk = sock->sk;
struct xdp_sock *xs = xdp_sk(sk);
int len;
if (level != SOL_XDP)
return -ENOPROTOOPT;
if (get_user(len, optlen))
return -EFAULT;
if (len < 0)
return -EINVAL;
switch (optname) {
case XDP_STATISTICS:
{
struct xdp_statistics stats;
if (len < sizeof(stats))
return -EINVAL;
mutex_lock(&xs->mutex);
stats.rx_dropped = xs->rx_dropped;
stats.rx_invalid_descs = xskq_nb_invalid_descs(xs->rx);
stats.tx_invalid_descs = xskq_nb_invalid_descs(xs->tx);
mutex_unlock(&xs->mutex);
if (copy_to_user(optval, &stats, sizeof(stats)))
return -EFAULT;
if (put_user(sizeof(stats), optlen))
return -EFAULT;
return 0;
}
case XDP_MMAP_OFFSETS:
{
struct xdp_mmap_offsets off;
xsk: add support for need_wakeup flag in AF_XDP rings This commit adds support for a new flag called need_wakeup in the AF_XDP Tx and fill rings. When this flag is set, it means that the application has to explicitly wake up the kernel Rx (for the bit in the fill ring) or kernel Tx (for bit in the Tx ring) processing by issuing a syscall. Poll() can wake up both depending on the flags submitted and sendto() will wake up tx processing only. The main reason for introducing this new flag is to be able to efficiently support the case when application and driver is executing on the same core. Previously, the driver was just busy-spinning on the fill ring if it ran out of buffers in the HW and there were none on the fill ring. This approach works when the application is running on another core as it can replenish the fill ring while the driver is busy-spinning. Though, this is a lousy approach if both of them are running on the same core as the probability of the fill ring getting more entries when the driver is busy-spinning is zero. With this new feature the driver now sets the need_wakeup flag and returns to the application. The application can then replenish the fill queue and then explicitly wake up the Rx processing in the kernel using the syscall poll(). For Tx, the flag is only set to one if the driver has no outstanding Tx completion interrupts. If it has some, the flag is zero as it will be woken up by a completion interrupt anyway. As a nice side effect, this new flag also improves the performance of the case where application and driver are running on two different cores as it reduces the number of syscalls to the kernel. The kernel tells user space if it needs to be woken up by a syscall, and this eliminates many of the syscalls. This flag needs some simple driver support. If the driver does not support this, the Rx flag is always zero and the Tx flag is always one. This makes any application relying on this feature default to the old behaviour of not requiring any syscalls in the Rx path and always having to call sendto() in the Tx path. For backwards compatibility reasons, this feature has to be explicitly turned on using a new bind flag (XDP_USE_NEED_WAKEUP). I recommend that you always turn it on as it so far always have had a positive performance impact. The name and inspiration of the flag has been taken from io_uring by Jens Axboe. Details about this feature in io_uring can be found in http://kernel.dk/io_uring.pdf, section 8.3. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-14 10:27:17 +03:00
struct xdp_mmap_offsets_v1 off_v1;
bool flags_supported = true;
void *to_copy;
xsk: add support for need_wakeup flag in AF_XDP rings This commit adds support for a new flag called need_wakeup in the AF_XDP Tx and fill rings. When this flag is set, it means that the application has to explicitly wake up the kernel Rx (for the bit in the fill ring) or kernel Tx (for bit in the Tx ring) processing by issuing a syscall. Poll() can wake up both depending on the flags submitted and sendto() will wake up tx processing only. The main reason for introducing this new flag is to be able to efficiently support the case when application and driver is executing on the same core. Previously, the driver was just busy-spinning on the fill ring if it ran out of buffers in the HW and there were none on the fill ring. This approach works when the application is running on another core as it can replenish the fill ring while the driver is busy-spinning. Though, this is a lousy approach if both of them are running on the same core as the probability of the fill ring getting more entries when the driver is busy-spinning is zero. With this new feature the driver now sets the need_wakeup flag and returns to the application. The application can then replenish the fill queue and then explicitly wake up the Rx processing in the kernel using the syscall poll(). For Tx, the flag is only set to one if the driver has no outstanding Tx completion interrupts. If it has some, the flag is zero as it will be woken up by a completion interrupt anyway. As a nice side effect, this new flag also improves the performance of the case where application and driver are running on two different cores as it reduces the number of syscalls to the kernel. The kernel tells user space if it needs to be woken up by a syscall, and this eliminates many of the syscalls. This flag needs some simple driver support. If the driver does not support this, the Rx flag is always zero and the Tx flag is always one. This makes any application relying on this feature default to the old behaviour of not requiring any syscalls in the Rx path and always having to call sendto() in the Tx path. For backwards compatibility reasons, this feature has to be explicitly turned on using a new bind flag (XDP_USE_NEED_WAKEUP). I recommend that you always turn it on as it so far always have had a positive performance impact. The name and inspiration of the flag has been taken from io_uring by Jens Axboe. Details about this feature in io_uring can be found in http://kernel.dk/io_uring.pdf, section 8.3. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-14 10:27:17 +03:00
if (len < sizeof(off_v1))
return -EINVAL;
xsk: add support for need_wakeup flag in AF_XDP rings This commit adds support for a new flag called need_wakeup in the AF_XDP Tx and fill rings. When this flag is set, it means that the application has to explicitly wake up the kernel Rx (for the bit in the fill ring) or kernel Tx (for bit in the Tx ring) processing by issuing a syscall. Poll() can wake up both depending on the flags submitted and sendto() will wake up tx processing only. The main reason for introducing this new flag is to be able to efficiently support the case when application and driver is executing on the same core. Previously, the driver was just busy-spinning on the fill ring if it ran out of buffers in the HW and there were none on the fill ring. This approach works when the application is running on another core as it can replenish the fill ring while the driver is busy-spinning. Though, this is a lousy approach if both of them are running on the same core as the probability of the fill ring getting more entries when the driver is busy-spinning is zero. With this new feature the driver now sets the need_wakeup flag and returns to the application. The application can then replenish the fill queue and then explicitly wake up the Rx processing in the kernel using the syscall poll(). For Tx, the flag is only set to one if the driver has no outstanding Tx completion interrupts. If it has some, the flag is zero as it will be woken up by a completion interrupt anyway. As a nice side effect, this new flag also improves the performance of the case where application and driver are running on two different cores as it reduces the number of syscalls to the kernel. The kernel tells user space if it needs to be woken up by a syscall, and this eliminates many of the syscalls. This flag needs some simple driver support. If the driver does not support this, the Rx flag is always zero and the Tx flag is always one. This makes any application relying on this feature default to the old behaviour of not requiring any syscalls in the Rx path and always having to call sendto() in the Tx path. For backwards compatibility reasons, this feature has to be explicitly turned on using a new bind flag (XDP_USE_NEED_WAKEUP). I recommend that you always turn it on as it so far always have had a positive performance impact. The name and inspiration of the flag has been taken from io_uring by Jens Axboe. Details about this feature in io_uring can be found in http://kernel.dk/io_uring.pdf, section 8.3. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-14 10:27:17 +03:00
else if (len < sizeof(off))
flags_supported = false;
if (flags_supported) {
/* xdp_ring_offset is identical to xdp_ring_offset_v1
* except for the flags field added to the end.
*/
xsk_enter_rxtx_offsets((struct xdp_ring_offset_v1 *)
&off.rx);
xsk_enter_rxtx_offsets((struct xdp_ring_offset_v1 *)
&off.tx);
xsk_enter_umem_offsets((struct xdp_ring_offset_v1 *)
&off.fr);
xsk_enter_umem_offsets((struct xdp_ring_offset_v1 *)
&off.cr);
off.rx.flags = offsetof(struct xdp_rxtx_ring,
ptrs.flags);
off.tx.flags = offsetof(struct xdp_rxtx_ring,
ptrs.flags);
off.fr.flags = offsetof(struct xdp_umem_ring,
ptrs.flags);
off.cr.flags = offsetof(struct xdp_umem_ring,
ptrs.flags);
len = sizeof(off);
to_copy = &off;
} else {
xsk_enter_rxtx_offsets(&off_v1.rx);
xsk_enter_rxtx_offsets(&off_v1.tx);
xsk_enter_umem_offsets(&off_v1.fr);
xsk_enter_umem_offsets(&off_v1.cr);
len = sizeof(off_v1);
to_copy = &off_v1;
}
xsk: add support for need_wakeup flag in AF_XDP rings This commit adds support for a new flag called need_wakeup in the AF_XDP Tx and fill rings. When this flag is set, it means that the application has to explicitly wake up the kernel Rx (for the bit in the fill ring) or kernel Tx (for bit in the Tx ring) processing by issuing a syscall. Poll() can wake up both depending on the flags submitted and sendto() will wake up tx processing only. The main reason for introducing this new flag is to be able to efficiently support the case when application and driver is executing on the same core. Previously, the driver was just busy-spinning on the fill ring if it ran out of buffers in the HW and there were none on the fill ring. This approach works when the application is running on another core as it can replenish the fill ring while the driver is busy-spinning. Though, this is a lousy approach if both of them are running on the same core as the probability of the fill ring getting more entries when the driver is busy-spinning is zero. With this new feature the driver now sets the need_wakeup flag and returns to the application. The application can then replenish the fill queue and then explicitly wake up the Rx processing in the kernel using the syscall poll(). For Tx, the flag is only set to one if the driver has no outstanding Tx completion interrupts. If it has some, the flag is zero as it will be woken up by a completion interrupt anyway. As a nice side effect, this new flag also improves the performance of the case where application and driver are running on two different cores as it reduces the number of syscalls to the kernel. The kernel tells user space if it needs to be woken up by a syscall, and this eliminates many of the syscalls. This flag needs some simple driver support. If the driver does not support this, the Rx flag is always zero and the Tx flag is always one. This makes any application relying on this feature default to the old behaviour of not requiring any syscalls in the Rx path and always having to call sendto() in the Tx path. For backwards compatibility reasons, this feature has to be explicitly turned on using a new bind flag (XDP_USE_NEED_WAKEUP). I recommend that you always turn it on as it so far always have had a positive performance impact. The name and inspiration of the flag has been taken from io_uring by Jens Axboe. Details about this feature in io_uring can be found in http://kernel.dk/io_uring.pdf, section 8.3. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-14 10:27:17 +03:00
if (copy_to_user(optval, to_copy, len))
return -EFAULT;
if (put_user(len, optlen))
return -EFAULT;
return 0;
}
case XDP_OPTIONS:
{
struct xdp_options opts = {};
if (len < sizeof(opts))
return -EINVAL;
mutex_lock(&xs->mutex);
if (xs->zc)
opts.flags |= XDP_OPTIONS_ZEROCOPY;
mutex_unlock(&xs->mutex);
len = sizeof(opts);
if (copy_to_user(optval, &opts, len))
return -EFAULT;
if (put_user(len, optlen))
return -EFAULT;
return 0;
}
default:
break;
}
return -EOPNOTSUPP;
}
static int xsk_mmap(struct file *file, struct socket *sock,
struct vm_area_struct *vma)
{
loff_t offset = (loff_t)vma->vm_pgoff << PAGE_SHIFT;
unsigned long size = vma->vm_end - vma->vm_start;
struct xdp_sock *xs = xdp_sk(sock->sk);
struct xsk_queue *q = NULL;
struct xdp_umem *umem;
unsigned long pfn;
struct page *qpg;
xsk: use state member for socket synchronization Prior the state variable was introduced by Ilya, the dev member was used to determine whether the socket was bound or not. However, when dev was read, proper SMP barriers and READ_ONCE were missing. In order to address the missing barriers and READ_ONCE, we start using the state variable as a point of synchronization. The state member read/write is paired with proper SMP barriers, and from this follows that the members described above does not need READ_ONCE if used in conjunction with state check. In all syscalls and the xsk_rcv path we check if state is XSK_BOUND. If that is the case we do a SMP read barrier, and this implies that the dev, umem and all rings are correctly setup. Note that no READ_ONCE are needed for these variable if used when state is XSK_BOUND (plus the read barrier). To summarize: The members struct xdp_sock members dev, queue_id, umem, fq, cq, tx, rx, and state were read lock-less, with incorrect barriers and missing {READ, WRITE}_ONCE. Now, umem, fq, cq, tx, rx, and state are read lock-less. When these members are updated, WRITE_ONCE is used. When read, READ_ONCE are only used when read outside the control mutex (e.g. mmap) or, not synchronized with the state member (XSK_BOUND plus smp_rmb()) Note that dev and queue_id do not need a WRITE_ONCE or READ_ONCE, due to the introduce state synchronization (XSK_BOUND plus smp_rmb()). Introducing the state check also fixes a race, found by syzcaller, in xsk_poll() where umem could be accessed when stale. Suggested-by: Hillf Danton <hdanton@sina.com> Reported-by: syzbot+c82697e3043781e08802@syzkaller.appspotmail.com Fixes: 77cd0d7b3f25 ("xsk: add support for need_wakeup flag in AF_XDP rings") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-09-04 14:49:12 +03:00
if (READ_ONCE(xs->state) != XSK_READY)
return -EBUSY;
if (offset == XDP_PGOFF_RX_RING) {
q = READ_ONCE(xs->rx);
} else if (offset == XDP_PGOFF_TX_RING) {
q = READ_ONCE(xs->tx);
} else {
umem = READ_ONCE(xs->umem);
if (!umem)
return -EINVAL;
/* Matches the smp_wmb() in XDP_UMEM_REG */
smp_rmb();
if (offset == XDP_UMEM_PGOFF_FILL_RING)
q = READ_ONCE(umem->fq);
else if (offset == XDP_UMEM_PGOFF_COMPLETION_RING)
q = READ_ONCE(umem->cq);
}
if (!q)
return -EINVAL;
/* Matches the smp_wmb() in xsk_init_queue */
smp_rmb();
qpg = virt_to_head_page(q->ring);
if (size > page_size(qpg))
return -EINVAL;
pfn = virt_to_phys(q->ring) >> PAGE_SHIFT;
return remap_pfn_range(vma, vma->vm_start, pfn,
size, vma->vm_page_prot);
}
static int xsk_notifier(struct notifier_block *this,
unsigned long msg, void *ptr)
{
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
struct net *net = dev_net(dev);
struct sock *sk;
switch (msg) {
case NETDEV_UNREGISTER:
mutex_lock(&net->xdp.lock);
sk_for_each(sk, &net->xdp.list) {
struct xdp_sock *xs = xdp_sk(sk);
mutex_lock(&xs->mutex);
if (xs->dev == dev) {
sk->sk_err = ENETDOWN;
if (!sock_flag(sk, SOCK_DEAD))
sk->sk_error_report(sk);
xsk_unbind_dev(xs);
/* Clear device references in umem. */
xdp_umem_clear_dev(xs->umem);
}
mutex_unlock(&xs->mutex);
}
mutex_unlock(&net->xdp.lock);
break;
}
return NOTIFY_DONE;
}
static struct proto xsk_proto = {
.name = "XDP",
.owner = THIS_MODULE,
.obj_size = sizeof(struct xdp_sock),
};
static const struct proto_ops xsk_proto_ops = {
.family = PF_XDP,
.owner = THIS_MODULE,
.release = xsk_release,
.bind = xsk_bind,
.connect = sock_no_connect,
.socketpair = sock_no_socketpair,
.accept = sock_no_accept,
.getname = sock_no_getname,
.poll = xsk_poll,
.ioctl = sock_no_ioctl,
.listen = sock_no_listen,
.shutdown = sock_no_shutdown,
.setsockopt = xsk_setsockopt,
.getsockopt = xsk_getsockopt,
.sendmsg = xsk_sendmsg,
.recvmsg = sock_no_recvmsg,
.mmap = xsk_mmap,
.sendpage = sock_no_sendpage,
};
static void xsk_destruct(struct sock *sk)
{
struct xdp_sock *xs = xdp_sk(sk);
if (!sock_flag(sk, SOCK_DEAD))
return;
xdp_put_umem(xs->umem);
sk_refcnt_debug_dec(sk);
}
static int xsk_create(struct net *net, struct socket *sock, int protocol,
int kern)
{
struct sock *sk;
struct xdp_sock *xs;
if (!ns_capable(net->user_ns, CAP_NET_RAW))
return -EPERM;
if (sock->type != SOCK_RAW)
return -ESOCKTNOSUPPORT;
if (protocol)
return -EPROTONOSUPPORT;
sock->state = SS_UNCONNECTED;
sk = sk_alloc(net, PF_XDP, GFP_KERNEL, &xsk_proto, kern);
if (!sk)
return -ENOBUFS;
sock->ops = &xsk_proto_ops;
sock_init_data(sock, sk);
sk->sk_family = PF_XDP;
sk->sk_destruct = xsk_destruct;
sk_refcnt_debug_inc(sk);
sock_set_flag(sk, SOCK_RCU_FREE);
xs = xdp_sk(sk);
xs->state = XSK_READY;
mutex_init(&xs->mutex);
spin_lock_init(&xs->rx_lock);
xsk: fix potential race in SKB TX completion code There is a potential race in the TX completion code for the SKB case. One process enters the sendmsg code of an AF_XDP socket in order to send a frame. The execution eventually trickles down to the driver that is told to send the packet. However, it decides to drop the packet due to some error condition (e.g., rings full) and frees the SKB. This will trigger the SKB destructor and a completion will be sent to the AF_XDP user space through its single-producer/single-consumer queues. At the same time a TX interrupt has fired on another core and it dispatches the TX completion code in the driver. It does its HW specific things and ends up freeing the SKB associated with the transmitted packet. This will trigger the SKB destructor and a completion will be sent to the AF_XDP user space through its single-producer/single-consumer queues. With a pseudo call stack, it would look like this: Core 1: sendmsg() being called in the application netdev_start_xmit() Driver entered through ndo_start_xmit Driver decides to free the SKB for some reason (e.g., rings full) Destructor of SKB called xskq_produce_addr() is called to signal completion to user space Core 2: TX completion irq NAPI loop Driver irq handler for TX completions Frees the SKB Destructor of SKB called xskq_produce_addr() is called to signal completion to user space We now have a violation of the single-producer/single-consumer principle for our queues as there are two threads trying to produce at the same time on the same queue. Fixed by introducing a spin_lock in the destructor. In regards to the performance, I get around 1.74 Mpps for txonly before and after the introduction of the spinlock. There is of course some impact due to the spin lock but it is in the less significant digits that are too noisy for me to measure. But let us say that the version without the spin lock got 1.745 Mpps in the best case and the version with 1.735 Mpps in the worst case, then that would mean a maximum drop in performance of 0.5%. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-06-29 10:48:20 +03:00
spin_lock_init(&xs->tx_completion_lock);
INIT_LIST_HEAD(&xs->map_list);
spin_lock_init(&xs->map_list_lock);
mutex_lock(&net->xdp.lock);
sk_add_node_rcu(sk, &net->xdp.list);
mutex_unlock(&net->xdp.lock);
local_bh_disable();
sock_prot_inuse_add(net, &xsk_proto, 1);
local_bh_enable();
return 0;
}
static const struct net_proto_family xsk_family_ops = {
.family = PF_XDP,
.create = xsk_create,
.owner = THIS_MODULE,
};
static struct notifier_block xsk_netdev_notifier = {
.notifier_call = xsk_notifier,
};
static int __net_init xsk_net_init(struct net *net)
{
mutex_init(&net->xdp.lock);
INIT_HLIST_HEAD(&net->xdp.list);
return 0;
}
static void __net_exit xsk_net_exit(struct net *net)
{
WARN_ON_ONCE(!hlist_empty(&net->xdp.list));
}
static struct pernet_operations xsk_net_ops = {
.init = xsk_net_init,
.exit = xsk_net_exit,
};
static int __init xsk_init(void)
{
int err;
err = proto_register(&xsk_proto, 0 /* no slab */);
if (err)
goto out;
err = sock_register(&xsk_family_ops);
if (err)
goto out_proto;
err = register_pernet_subsys(&xsk_net_ops);
if (err)
goto out_sk;
err = register_netdevice_notifier(&xsk_netdev_notifier);
if (err)
goto out_pernet;
return 0;
out_pernet:
unregister_pernet_subsys(&xsk_net_ops);
out_sk:
sock_unregister(PF_XDP);
out_proto:
proto_unregister(&xsk_proto);
out:
return err;
}
fs_initcall(xsk_init);