WSL2-Linux-Kernel/sound/pci/nm256/nm256.c

1698 строки
43 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Driver for NeoMagic 256AV and 256ZX chipsets.
* Copyright (c) 2000 by Takashi Iwai <tiwai@suse.de>
*
* Based on nm256_audio.c OSS driver in linux kernel.
* The original author of OSS nm256 driver wishes to remain anonymous,
* so I just put my acknoledgment to him/her here.
* The original author's web page is found at
* http://www.uglx.org/sony.html
*/
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <sound/core.h>
#include <sound/info.h>
#include <sound/control.h>
#include <sound/pcm.h>
#include <sound/ac97_codec.h>
#include <sound/initval.h>
#define CARD_NAME "NeoMagic 256AV/ZX"
#define DRIVER_NAME "NM256"
MODULE_AUTHOR("Takashi Iwai <tiwai@suse.de>");
MODULE_DESCRIPTION("NeoMagic NM256AV/ZX");
MODULE_LICENSE("GPL");
/*
* some compile conditions.
*/
static int index = SNDRV_DEFAULT_IDX1; /* Index */
static char *id = SNDRV_DEFAULT_STR1; /* ID for this card */
static int playback_bufsize = 16;
static int capture_bufsize = 16;
static bool force_ac97; /* disabled as default */
static int buffer_top; /* not specified */
static bool use_cache; /* disabled */
static bool vaio_hack; /* disabled */
static bool reset_workaround;
static bool reset_workaround_2;
module_param(index, int, 0444);
MODULE_PARM_DESC(index, "Index value for " CARD_NAME " soundcard.");
module_param(id, charp, 0444);
MODULE_PARM_DESC(id, "ID string for " CARD_NAME " soundcard.");
module_param(playback_bufsize, int, 0444);
MODULE_PARM_DESC(playback_bufsize, "DAC frame size in kB for " CARD_NAME " soundcard.");
module_param(capture_bufsize, int, 0444);
MODULE_PARM_DESC(capture_bufsize, "ADC frame size in kB for " CARD_NAME " soundcard.");
module_param(force_ac97, bool, 0444);
MODULE_PARM_DESC(force_ac97, "Force to use AC97 codec for " CARD_NAME " soundcard.");
module_param(buffer_top, int, 0444);
MODULE_PARM_DESC(buffer_top, "Set the top address of audio buffer for " CARD_NAME " soundcard.");
module_param(use_cache, bool, 0444);
MODULE_PARM_DESC(use_cache, "Enable the cache for coefficient table access.");
module_param(vaio_hack, bool, 0444);
MODULE_PARM_DESC(vaio_hack, "Enable workaround for Sony VAIO notebooks.");
module_param(reset_workaround, bool, 0444);
MODULE_PARM_DESC(reset_workaround, "Enable AC97 RESET workaround for some laptops.");
module_param(reset_workaround_2, bool, 0444);
MODULE_PARM_DESC(reset_workaround_2, "Enable extended AC97 RESET workaround for some other laptops.");
/* just for backward compatibility */
static bool enable;
module_param(enable, bool, 0444);
/*
* hw definitions
*/
/* The BIOS signature. */
#define NM_SIGNATURE 0x4e4d0000
/* Signature mask. */
#define NM_SIG_MASK 0xffff0000
/* Size of the second memory area. */
#define NM_PORT2_SIZE 4096
/* The base offset of the mixer in the second memory area. */
#define NM_MIXER_OFFSET 0x600
/* The maximum size of a coefficient entry. */
#define NM_MAX_PLAYBACK_COEF_SIZE 0x5000
#define NM_MAX_RECORD_COEF_SIZE 0x1260
/* The interrupt register. */
#define NM_INT_REG 0xa04
/* And its bits. */
#define NM_PLAYBACK_INT 0x40
#define NM_RECORD_INT 0x100
#define NM_MISC_INT_1 0x4000
#define NM_MISC_INT_2 0x1
#define NM_ACK_INT(chip, X) snd_nm256_writew(chip, NM_INT_REG, (X) << 1)
/* The AV's "mixer ready" status bit and location. */
#define NM_MIXER_STATUS_OFFSET 0xa04
#define NM_MIXER_READY_MASK 0x0800
#define NM_MIXER_PRESENCE 0xa06
#define NM_PRESENCE_MASK 0x0050
#define NM_PRESENCE_VALUE 0x0040
/*
* For the ZX. It uses the same interrupt register, but it holds 32
* bits instead of 16.
*/
#define NM2_PLAYBACK_INT 0x10000
#define NM2_RECORD_INT 0x80000
#define NM2_MISC_INT_1 0x8
#define NM2_MISC_INT_2 0x2
#define NM2_ACK_INT(chip, X) snd_nm256_writel(chip, NM_INT_REG, (X))
/* The ZX's "mixer ready" status bit and location. */
#define NM2_MIXER_STATUS_OFFSET 0xa06
#define NM2_MIXER_READY_MASK 0x0800
/* The playback registers start from here. */
#define NM_PLAYBACK_REG_OFFSET 0x0
/* The record registers start from here. */
#define NM_RECORD_REG_OFFSET 0x200
/* The rate register is located 2 bytes from the start of the register area. */
#define NM_RATE_REG_OFFSET 2
/* Mono/stereo flag, number of bits on playback, and rate mask. */
#define NM_RATE_STEREO 1
#define NM_RATE_BITS_16 2
#define NM_RATE_MASK 0xf0
/* Playback enable register. */
#define NM_PLAYBACK_ENABLE_REG (NM_PLAYBACK_REG_OFFSET + 0x1)
#define NM_PLAYBACK_ENABLE_FLAG 1
#define NM_PLAYBACK_ONESHOT 2
#define NM_PLAYBACK_FREERUN 4
/* Mutes the audio output. */
#define NM_AUDIO_MUTE_REG (NM_PLAYBACK_REG_OFFSET + 0x18)
#define NM_AUDIO_MUTE_LEFT 0x8000
#define NM_AUDIO_MUTE_RIGHT 0x0080
/* Recording enable register. */
#define NM_RECORD_ENABLE_REG (NM_RECORD_REG_OFFSET + 0)
#define NM_RECORD_ENABLE_FLAG 1
#define NM_RECORD_FREERUN 2
/* coefficient buffer pointer */
#define NM_COEFF_START_OFFSET 0x1c
#define NM_COEFF_END_OFFSET 0x20
/* DMA buffer offsets */
#define NM_RBUFFER_START (NM_RECORD_REG_OFFSET + 0x4)
#define NM_RBUFFER_END (NM_RECORD_REG_OFFSET + 0x10)
#define NM_RBUFFER_WMARK (NM_RECORD_REG_OFFSET + 0xc)
#define NM_RBUFFER_CURRP (NM_RECORD_REG_OFFSET + 0x8)
#define NM_PBUFFER_START (NM_PLAYBACK_REG_OFFSET + 0x4)
#define NM_PBUFFER_END (NM_PLAYBACK_REG_OFFSET + 0x14)
#define NM_PBUFFER_WMARK (NM_PLAYBACK_REG_OFFSET + 0xc)
#define NM_PBUFFER_CURRP (NM_PLAYBACK_REG_OFFSET + 0x8)
struct nm256_stream {
struct nm256 *chip;
struct snd_pcm_substream *substream;
int running;
int suspended;
u32 buf; /* offset from chip->buffer */
int bufsize; /* buffer size in bytes */
void __iomem *bufptr; /* mapped pointer */
unsigned long bufptr_addr; /* physical address of the mapped pointer */
int dma_size; /* buffer size of the substream in bytes */
int period_size; /* period size in bytes */
int periods; /* # of periods */
int shift; /* bit shifts */
int cur_period; /* current period # */
};
struct nm256 {
struct snd_card *card;
void __iomem *cport; /* control port */
unsigned long cport_addr; /* physical address */
void __iomem *buffer; /* buffer */
unsigned long buffer_addr; /* buffer phyiscal address */
u32 buffer_start; /* start offset from pci resource 0 */
u32 buffer_end; /* end offset */
u32 buffer_size; /* total buffer size */
u32 all_coeff_buf; /* coefficient buffer */
u32 coeff_buf[2]; /* coefficient buffer for each stream */
unsigned int coeffs_current: 1; /* coeff. table is loaded? */
unsigned int use_cache: 1; /* use one big coef. table */
unsigned int reset_workaround: 1; /* Workaround for some laptops to avoid freeze */
unsigned int reset_workaround_2: 1; /* Extended workaround for some other laptops to avoid freeze */
unsigned int in_resume: 1;
int mixer_base; /* register offset of ac97 mixer */
int mixer_status_offset; /* offset of mixer status reg. */
int mixer_status_mask; /* bit mask to test the mixer status */
int irq;
int irq_acks;
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 17:55:46 +04:00
irq_handler_t interrupt;
int badintrcount; /* counter to check bogus interrupts */
struct mutex irq_mutex;
struct nm256_stream streams[2];
struct snd_ac97 *ac97;
unsigned short *ac97_regs; /* register caches, only for valid regs */
struct snd_pcm *pcm;
struct pci_dev *pci;
spinlock_t reg_lock;
};
/*
* include coefficient table
*/
#include "nm256_coef.c"
/*
* PCI ids
*/
static const struct pci_device_id snd_nm256_ids[] = {
{PCI_VDEVICE(NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO), 0},
{PCI_VDEVICE(NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO), 0},
{PCI_VDEVICE(NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256XL_PLUS_AUDIO), 0},
{0,},
};
MODULE_DEVICE_TABLE(pci, snd_nm256_ids);
/*
* lowlvel stuffs
*/
static inline u8
snd_nm256_readb(struct nm256 *chip, int offset)
{
return readb(chip->cport + offset);
}
static inline u16
snd_nm256_readw(struct nm256 *chip, int offset)
{
return readw(chip->cport + offset);
}
static inline u32
snd_nm256_readl(struct nm256 *chip, int offset)
{
return readl(chip->cport + offset);
}
static inline void
snd_nm256_writeb(struct nm256 *chip, int offset, u8 val)
{
writeb(val, chip->cport + offset);
}
static inline void
snd_nm256_writew(struct nm256 *chip, int offset, u16 val)
{
writew(val, chip->cport + offset);
}
static inline void
snd_nm256_writel(struct nm256 *chip, int offset, u32 val)
{
writel(val, chip->cport + offset);
}
static inline void
snd_nm256_write_buffer(struct nm256 *chip, const void *src, int offset, int size)
{
offset -= chip->buffer_start;
#ifdef CONFIG_SND_DEBUG
if (offset < 0 || offset >= chip->buffer_size) {
dev_err(chip->card->dev,
"write_buffer invalid offset = %d size = %d\n",
offset, size);
return;
}
#endif
memcpy_toio(chip->buffer + offset, src, size);
}
/*
* coefficient handlers -- what a magic!
*/
static u16
snd_nm256_get_start_offset(int which)
{
u16 offset = 0;
while (which-- > 0)
offset += coefficient_sizes[which];
return offset;
}
static void
snd_nm256_load_one_coefficient(struct nm256 *chip, int stream, u32 port, int which)
{
u32 coeff_buf = chip->coeff_buf[stream];
u16 offset = snd_nm256_get_start_offset(which);
u16 size = coefficient_sizes[which];
snd_nm256_write_buffer(chip, coefficients + offset, coeff_buf, size);
snd_nm256_writel(chip, port, coeff_buf);
/* ??? Record seems to behave differently than playback. */
if (stream == SNDRV_PCM_STREAM_PLAYBACK)
size--;
snd_nm256_writel(chip, port + 4, coeff_buf + size);
}
static void
snd_nm256_load_coefficient(struct nm256 *chip, int stream, int number)
{
/* The enable register for the specified engine. */
u32 poffset = (stream == SNDRV_PCM_STREAM_CAPTURE ?
NM_RECORD_ENABLE_REG : NM_PLAYBACK_ENABLE_REG);
u32 addr = NM_COEFF_START_OFFSET;
addr += (stream == SNDRV_PCM_STREAM_CAPTURE ?
NM_RECORD_REG_OFFSET : NM_PLAYBACK_REG_OFFSET);
if (snd_nm256_readb(chip, poffset) & 1) {
dev_dbg(chip->card->dev,
"NM256: Engine was enabled while loading coefficients!\n");
return;
}
/* The recording engine uses coefficient values 8-15. */
number &= 7;
if (stream == SNDRV_PCM_STREAM_CAPTURE)
number += 8;
if (! chip->use_cache) {
snd_nm256_load_one_coefficient(chip, stream, addr, number);
return;
}
if (! chip->coeffs_current) {
snd_nm256_write_buffer(chip, coefficients, chip->all_coeff_buf,
NM_TOTAL_COEFF_COUNT * 4);
chip->coeffs_current = 1;
} else {
u32 base = chip->all_coeff_buf;
u32 offset = snd_nm256_get_start_offset(number);
u32 end_offset = offset + coefficient_sizes[number];
snd_nm256_writel(chip, addr, base + offset);
if (stream == SNDRV_PCM_STREAM_PLAYBACK)
end_offset--;
snd_nm256_writel(chip, addr + 4, base + end_offset);
}
}
/* The actual rates supported by the card. */
static const unsigned int samplerates[8] = {
8000, 11025, 16000, 22050, 24000, 32000, 44100, 48000,
};
static const struct snd_pcm_hw_constraint_list constraints_rates = {
.count = ARRAY_SIZE(samplerates),
.list = samplerates,
.mask = 0,
};
/*
* return the index of the target rate
*/
static int
snd_nm256_fixed_rate(unsigned int rate)
{
unsigned int i;
for (i = 0; i < ARRAY_SIZE(samplerates); i++) {
if (rate == samplerates[i])
return i;
}
snd_BUG();
return 0;
}
/*
* set sample rate and format
*/
static void
snd_nm256_set_format(struct nm256 *chip, struct nm256_stream *s,
struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
int rate_index = snd_nm256_fixed_rate(runtime->rate);
unsigned char ratebits = (rate_index << 4) & NM_RATE_MASK;
s->shift = 0;
if (snd_pcm_format_width(runtime->format) == 16) {
ratebits |= NM_RATE_BITS_16;
s->shift++;
}
if (runtime->channels > 1) {
ratebits |= NM_RATE_STEREO;
s->shift++;
}
runtime->rate = samplerates[rate_index];
switch (substream->stream) {
case SNDRV_PCM_STREAM_PLAYBACK:
snd_nm256_load_coefficient(chip, 0, rate_index); /* 0 = playback */
snd_nm256_writeb(chip,
NM_PLAYBACK_REG_OFFSET + NM_RATE_REG_OFFSET,
ratebits);
break;
case SNDRV_PCM_STREAM_CAPTURE:
snd_nm256_load_coefficient(chip, 1, rate_index); /* 1 = record */
snd_nm256_writeb(chip,
NM_RECORD_REG_OFFSET + NM_RATE_REG_OFFSET,
ratebits);
break;
}
}
/* acquire interrupt */
static int snd_nm256_acquire_irq(struct nm256 *chip)
{
mutex_lock(&chip->irq_mutex);
if (chip->irq < 0) {
if (request_irq(chip->pci->irq, chip->interrupt, IRQF_SHARED,
KBUILD_MODNAME, chip)) {
dev_err(chip->card->dev,
"unable to grab IRQ %d\n", chip->pci->irq);
mutex_unlock(&chip->irq_mutex);
return -EBUSY;
}
chip->irq = chip->pci->irq;
chip->card->sync_irq = chip->irq;
}
chip->irq_acks++;
mutex_unlock(&chip->irq_mutex);
return 0;
}
/* release interrupt */
static void snd_nm256_release_irq(struct nm256 *chip)
{
mutex_lock(&chip->irq_mutex);
if (chip->irq_acks > 0)
chip->irq_acks--;
if (chip->irq_acks == 0 && chip->irq >= 0) {
free_irq(chip->irq, chip);
chip->irq = -1;
chip->card->sync_irq = -1;
}
mutex_unlock(&chip->irq_mutex);
}
/*
* start / stop
*/
/* update the watermark (current period) */
static void snd_nm256_pcm_mark(struct nm256 *chip, struct nm256_stream *s, int reg)
{
s->cur_period++;
s->cur_period %= s->periods;
snd_nm256_writel(chip, reg, s->buf + s->cur_period * s->period_size);
}
#define snd_nm256_playback_mark(chip, s) snd_nm256_pcm_mark(chip, s, NM_PBUFFER_WMARK)
#define snd_nm256_capture_mark(chip, s) snd_nm256_pcm_mark(chip, s, NM_RBUFFER_WMARK)
static void
snd_nm256_playback_start(struct nm256 *chip, struct nm256_stream *s,
struct snd_pcm_substream *substream)
{
/* program buffer pointers */
snd_nm256_writel(chip, NM_PBUFFER_START, s->buf);
snd_nm256_writel(chip, NM_PBUFFER_END, s->buf + s->dma_size - (1 << s->shift));
snd_nm256_writel(chip, NM_PBUFFER_CURRP, s->buf);
snd_nm256_playback_mark(chip, s);
/* Enable playback engine and interrupts. */
snd_nm256_writeb(chip, NM_PLAYBACK_ENABLE_REG,
NM_PLAYBACK_ENABLE_FLAG | NM_PLAYBACK_FREERUN);
/* Enable both channels. */
snd_nm256_writew(chip, NM_AUDIO_MUTE_REG, 0x0);
}
static void
snd_nm256_capture_start(struct nm256 *chip, struct nm256_stream *s,
struct snd_pcm_substream *substream)
{
/* program buffer pointers */
snd_nm256_writel(chip, NM_RBUFFER_START, s->buf);
snd_nm256_writel(chip, NM_RBUFFER_END, s->buf + s->dma_size);
snd_nm256_writel(chip, NM_RBUFFER_CURRP, s->buf);
snd_nm256_capture_mark(chip, s);
/* Enable playback engine and interrupts. */
snd_nm256_writeb(chip, NM_RECORD_ENABLE_REG,
NM_RECORD_ENABLE_FLAG | NM_RECORD_FREERUN);
}
/* Stop the play engine. */
static void
snd_nm256_playback_stop(struct nm256 *chip)
{
/* Shut off sound from both channels. */
snd_nm256_writew(chip, NM_AUDIO_MUTE_REG,
NM_AUDIO_MUTE_LEFT | NM_AUDIO_MUTE_RIGHT);
/* Disable play engine. */
snd_nm256_writeb(chip, NM_PLAYBACK_ENABLE_REG, 0);
}
static void
snd_nm256_capture_stop(struct nm256 *chip)
{
/* Disable recording engine. */
snd_nm256_writeb(chip, NM_RECORD_ENABLE_REG, 0);
}
static int
snd_nm256_playback_trigger(struct snd_pcm_substream *substream, int cmd)
{
struct nm256 *chip = snd_pcm_substream_chip(substream);
struct nm256_stream *s = substream->runtime->private_data;
int err = 0;
if (snd_BUG_ON(!s))
return -ENXIO;
spin_lock(&chip->reg_lock);
switch (cmd) {
case SNDRV_PCM_TRIGGER_RESUME:
s->suspended = 0;
fallthrough;
case SNDRV_PCM_TRIGGER_START:
if (! s->running) {
snd_nm256_playback_start(chip, s, substream);
s->running = 1;
}
break;
case SNDRV_PCM_TRIGGER_SUSPEND:
s->suspended = 1;
fallthrough;
case SNDRV_PCM_TRIGGER_STOP:
if (s->running) {
snd_nm256_playback_stop(chip);
s->running = 0;
}
break;
default:
err = -EINVAL;
break;
}
spin_unlock(&chip->reg_lock);
return err;
}
static int
snd_nm256_capture_trigger(struct snd_pcm_substream *substream, int cmd)
{
struct nm256 *chip = snd_pcm_substream_chip(substream);
struct nm256_stream *s = substream->runtime->private_data;
int err = 0;
if (snd_BUG_ON(!s))
return -ENXIO;
spin_lock(&chip->reg_lock);
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
if (! s->running) {
snd_nm256_capture_start(chip, s, substream);
s->running = 1;
}
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
if (s->running) {
snd_nm256_capture_stop(chip);
s->running = 0;
}
break;
default:
err = -EINVAL;
break;
}
spin_unlock(&chip->reg_lock);
return err;
}
/*
* prepare playback/capture channel
*/
static int snd_nm256_pcm_prepare(struct snd_pcm_substream *substream)
{
struct nm256 *chip = snd_pcm_substream_chip(substream);
struct snd_pcm_runtime *runtime = substream->runtime;
struct nm256_stream *s = runtime->private_data;
if (snd_BUG_ON(!s))
return -ENXIO;
s->dma_size = frames_to_bytes(runtime, substream->runtime->buffer_size);
s->period_size = frames_to_bytes(runtime, substream->runtime->period_size);
s->periods = substream->runtime->periods;
s->cur_period = 0;
spin_lock_irq(&chip->reg_lock);
s->running = 0;
snd_nm256_set_format(chip, s, substream);
spin_unlock_irq(&chip->reg_lock);
return 0;
}
/*
* get the current pointer
*/
static snd_pcm_uframes_t
snd_nm256_playback_pointer(struct snd_pcm_substream *substream)
{
struct nm256 *chip = snd_pcm_substream_chip(substream);
struct nm256_stream *s = substream->runtime->private_data;
unsigned long curp;
if (snd_BUG_ON(!s))
return 0;
curp = snd_nm256_readl(chip, NM_PBUFFER_CURRP) - (unsigned long)s->buf;
curp %= s->dma_size;
return bytes_to_frames(substream->runtime, curp);
}
static snd_pcm_uframes_t
snd_nm256_capture_pointer(struct snd_pcm_substream *substream)
{
struct nm256 *chip = snd_pcm_substream_chip(substream);
struct nm256_stream *s = substream->runtime->private_data;
unsigned long curp;
if (snd_BUG_ON(!s))
return 0;
curp = snd_nm256_readl(chip, NM_RBUFFER_CURRP) - (unsigned long)s->buf;
curp %= s->dma_size;
return bytes_to_frames(substream->runtime, curp);
}
/* Remapped I/O space can be accessible as pointer on i386 */
/* This might be changed in the future */
#ifndef __i386__
/*
* silence / copy for playback
*/
static int
snd_nm256_playback_silence(struct snd_pcm_substream *substream,
int channel, unsigned long pos, unsigned long count)
{
struct snd_pcm_runtime *runtime = substream->runtime;
struct nm256_stream *s = runtime->private_data;
memset_io(s->bufptr + pos, 0, count);
return 0;
}
static int
snd_nm256_playback_copy(struct snd_pcm_substream *substream,
int channel, unsigned long pos,
void __user *src, unsigned long count)
{
struct snd_pcm_runtime *runtime = substream->runtime;
struct nm256_stream *s = runtime->private_data;
if (copy_from_user_toio(s->bufptr + pos, src, count))
return -EFAULT;
return 0;
}
static int
snd_nm256_playback_copy_kernel(struct snd_pcm_substream *substream,
int channel, unsigned long pos,
void *src, unsigned long count)
{
struct snd_pcm_runtime *runtime = substream->runtime;
struct nm256_stream *s = runtime->private_data;
memcpy_toio(s->bufptr + pos, src, count);
return 0;
}
/*
* copy to user
*/
static int
snd_nm256_capture_copy(struct snd_pcm_substream *substream,
int channel, unsigned long pos,
void __user *dst, unsigned long count)
{
struct snd_pcm_runtime *runtime = substream->runtime;
struct nm256_stream *s = runtime->private_data;
if (copy_to_user_fromio(dst, s->bufptr + pos, count))
return -EFAULT;
return 0;
}
static int
snd_nm256_capture_copy_kernel(struct snd_pcm_substream *substream,
int channel, unsigned long pos,
void *dst, unsigned long count)
{
struct snd_pcm_runtime *runtime = substream->runtime;
struct nm256_stream *s = runtime->private_data;
memcpy_fromio(dst, s->bufptr + pos, count);
return 0;
}
#endif /* !__i386__ */
/*
* update playback/capture watermarks
*/
/* spinlock held! */
static void
snd_nm256_playback_update(struct nm256 *chip)
{
struct nm256_stream *s;
s = &chip->streams[SNDRV_PCM_STREAM_PLAYBACK];
if (s->running && s->substream) {
spin_unlock(&chip->reg_lock);
snd_pcm_period_elapsed(s->substream);
spin_lock(&chip->reg_lock);
snd_nm256_playback_mark(chip, s);
}
}
/* spinlock held! */
static void
snd_nm256_capture_update(struct nm256 *chip)
{
struct nm256_stream *s;
s = &chip->streams[SNDRV_PCM_STREAM_CAPTURE];
if (s->running && s->substream) {
spin_unlock(&chip->reg_lock);
snd_pcm_period_elapsed(s->substream);
spin_lock(&chip->reg_lock);
snd_nm256_capture_mark(chip, s);
}
}
/*
* hardware info
*/
static const struct snd_pcm_hardware snd_nm256_playback =
{
.info = SNDRV_PCM_INFO_MMAP_IOMEM |SNDRV_PCM_INFO_MMAP_VALID |
SNDRV_PCM_INFO_INTERLEAVED |
/*SNDRV_PCM_INFO_PAUSE |*/
SNDRV_PCM_INFO_RESUME,
.formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE,
.rates = SNDRV_PCM_RATE_KNOT/*24k*/ | SNDRV_PCM_RATE_8000_48000,
.rate_min = 8000,
.rate_max = 48000,
.channels_min = 1,
.channels_max = 2,
.periods_min = 2,
.periods_max = 1024,
.buffer_bytes_max = 128 * 1024,
.period_bytes_min = 256,
.period_bytes_max = 128 * 1024,
};
static const struct snd_pcm_hardware snd_nm256_capture =
{
.info = SNDRV_PCM_INFO_MMAP_IOMEM | SNDRV_PCM_INFO_MMAP_VALID |
SNDRV_PCM_INFO_INTERLEAVED |
/*SNDRV_PCM_INFO_PAUSE |*/
SNDRV_PCM_INFO_RESUME,
.formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE,
.rates = SNDRV_PCM_RATE_KNOT/*24k*/ | SNDRV_PCM_RATE_8000_48000,
.rate_min = 8000,
.rate_max = 48000,
.channels_min = 1,
.channels_max = 2,
.periods_min = 2,
.periods_max = 1024,
.buffer_bytes_max = 128 * 1024,
.period_bytes_min = 256,
.period_bytes_max = 128 * 1024,
};
/* set dma transfer size */
static int snd_nm256_pcm_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *hw_params)
{
/* area and addr are already set and unchanged */
substream->runtime->dma_bytes = params_buffer_bytes(hw_params);
return 0;
}
/*
* open
*/
static void snd_nm256_setup_stream(struct nm256 *chip, struct nm256_stream *s,
struct snd_pcm_substream *substream,
const struct snd_pcm_hardware *hw_ptr)
{
struct snd_pcm_runtime *runtime = substream->runtime;
s->running = 0;
runtime->hw = *hw_ptr;
runtime->hw.buffer_bytes_max = s->bufsize;
runtime->hw.period_bytes_max = s->bufsize / 2;
runtime->dma_area = (void __force *) s->bufptr;
runtime->dma_addr = s->bufptr_addr;
runtime->dma_bytes = s->bufsize;
runtime->private_data = s;
s->substream = substream;
snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
&constraints_rates);
}
static int
snd_nm256_playback_open(struct snd_pcm_substream *substream)
{
struct nm256 *chip = snd_pcm_substream_chip(substream);
if (snd_nm256_acquire_irq(chip) < 0)
return -EBUSY;
snd_nm256_setup_stream(chip, &chip->streams[SNDRV_PCM_STREAM_PLAYBACK],
substream, &snd_nm256_playback);
return 0;
}
static int
snd_nm256_capture_open(struct snd_pcm_substream *substream)
{
struct nm256 *chip = snd_pcm_substream_chip(substream);
if (snd_nm256_acquire_irq(chip) < 0)
return -EBUSY;
snd_nm256_setup_stream(chip, &chip->streams[SNDRV_PCM_STREAM_CAPTURE],
substream, &snd_nm256_capture);
return 0;
}
/*
* close - we don't have to do special..
*/
static int
snd_nm256_playback_close(struct snd_pcm_substream *substream)
{
struct nm256 *chip = snd_pcm_substream_chip(substream);
snd_nm256_release_irq(chip);
return 0;
}
static int
snd_nm256_capture_close(struct snd_pcm_substream *substream)
{
struct nm256 *chip = snd_pcm_substream_chip(substream);
snd_nm256_release_irq(chip);
return 0;
}
/*
* create a pcm instance
*/
static const struct snd_pcm_ops snd_nm256_playback_ops = {
.open = snd_nm256_playback_open,
.close = snd_nm256_playback_close,
.hw_params = snd_nm256_pcm_hw_params,
.prepare = snd_nm256_pcm_prepare,
.trigger = snd_nm256_playback_trigger,
.pointer = snd_nm256_playback_pointer,
#ifndef __i386__
.copy_user = snd_nm256_playback_copy,
.copy_kernel = snd_nm256_playback_copy_kernel,
.fill_silence = snd_nm256_playback_silence,
#endif
.mmap = snd_pcm_lib_mmap_iomem,
};
static const struct snd_pcm_ops snd_nm256_capture_ops = {
.open = snd_nm256_capture_open,
.close = snd_nm256_capture_close,
.hw_params = snd_nm256_pcm_hw_params,
.prepare = snd_nm256_pcm_prepare,
.trigger = snd_nm256_capture_trigger,
.pointer = snd_nm256_capture_pointer,
#ifndef __i386__
.copy_user = snd_nm256_capture_copy,
.copy_kernel = snd_nm256_capture_copy_kernel,
#endif
.mmap = snd_pcm_lib_mmap_iomem,
};
static int
snd_nm256_pcm(struct nm256 *chip, int device)
{
struct snd_pcm *pcm;
int i, err;
for (i = 0; i < 2; i++) {
struct nm256_stream *s = &chip->streams[i];
s->bufptr = chip->buffer + (s->buf - chip->buffer_start);
s->bufptr_addr = chip->buffer_addr + (s->buf - chip->buffer_start);
}
err = snd_pcm_new(chip->card, chip->card->driver, device,
1, 1, &pcm);
if (err < 0)
return err;
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_nm256_playback_ops);
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_nm256_capture_ops);
pcm->private_data = chip;
pcm->info_flags = 0;
chip->pcm = pcm;
return 0;
}
/*
* Initialize the hardware.
*/
static void
snd_nm256_init_chip(struct nm256 *chip)
{
/* Reset everything. */
snd_nm256_writeb(chip, 0x0, 0x11);
snd_nm256_writew(chip, 0x214, 0);
/* stop sounds.. */
//snd_nm256_playback_stop(chip);
//snd_nm256_capture_stop(chip);
}
static irqreturn_t
snd_nm256_intr_check(struct nm256 *chip)
{
if (chip->badintrcount++ > 1000) {
/*
* I'm not sure if the best thing is to stop the card from
* playing or just release the interrupt (after all, we're in
* a bad situation, so doing fancy stuff may not be such a good
* idea).
*
* I worry about the card engine continuing to play noise
* over and over, however--that could become a very
* obnoxious problem. And we know that when this usually
* happens things are fairly safe, it just means the user's
* inserted a PCMCIA card and someone's spamming us with IRQ 9s.
*/
if (chip->streams[SNDRV_PCM_STREAM_PLAYBACK].running)
snd_nm256_playback_stop(chip);
if (chip->streams[SNDRV_PCM_STREAM_CAPTURE].running)
snd_nm256_capture_stop(chip);
chip->badintrcount = 0;
return IRQ_HANDLED;
}
return IRQ_NONE;
}
/*
* Handle a potential interrupt for the device referred to by DEV_ID.
*
* I don't like the cut-n-paste job here either between the two routines,
* but there are sufficient differences between the two interrupt handlers
* that parameterizing it isn't all that great either. (Could use a macro,
* I suppose...yucky bleah.)
*/
static irqreturn_t
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 17:55:46 +04:00
snd_nm256_interrupt(int irq, void *dev_id)
{
struct nm256 *chip = dev_id;
u16 status;
u8 cbyte;
status = snd_nm256_readw(chip, NM_INT_REG);
/* Not ours. */
if (status == 0)
return snd_nm256_intr_check(chip);
chip->badintrcount = 0;
/* Rather boring; check for individual interrupts and process them. */
spin_lock(&chip->reg_lock);
if (status & NM_PLAYBACK_INT) {
status &= ~NM_PLAYBACK_INT;
NM_ACK_INT(chip, NM_PLAYBACK_INT);
snd_nm256_playback_update(chip);
}
if (status & NM_RECORD_INT) {
status &= ~NM_RECORD_INT;
NM_ACK_INT(chip, NM_RECORD_INT);
snd_nm256_capture_update(chip);
}
if (status & NM_MISC_INT_1) {
status &= ~NM_MISC_INT_1;
NM_ACK_INT(chip, NM_MISC_INT_1);
dev_dbg(chip->card->dev, "NM256: Got misc interrupt #1\n");
snd_nm256_writew(chip, NM_INT_REG, 0x8000);
cbyte = snd_nm256_readb(chip, 0x400);
snd_nm256_writeb(chip, 0x400, cbyte | 2);
}
if (status & NM_MISC_INT_2) {
status &= ~NM_MISC_INT_2;
NM_ACK_INT(chip, NM_MISC_INT_2);
dev_dbg(chip->card->dev, "NM256: Got misc interrupt #2\n");
cbyte = snd_nm256_readb(chip, 0x400);
snd_nm256_writeb(chip, 0x400, cbyte & ~2);
}
/* Unknown interrupt. */
if (status) {
dev_dbg(chip->card->dev,
"NM256: Fire in the hole! Unknown status 0x%x\n",
status);
/* Pray. */
NM_ACK_INT(chip, status);
}
spin_unlock(&chip->reg_lock);
return IRQ_HANDLED;
}
/*
* Handle a potential interrupt for the device referred to by DEV_ID.
* This handler is for the 256ZX, and is very similar to the non-ZX
* routine.
*/
static irqreturn_t
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 17:55:46 +04:00
snd_nm256_interrupt_zx(int irq, void *dev_id)
{
struct nm256 *chip = dev_id;
u32 status;
u8 cbyte;
status = snd_nm256_readl(chip, NM_INT_REG);
/* Not ours. */
if (status == 0)
return snd_nm256_intr_check(chip);
chip->badintrcount = 0;
/* Rather boring; check for individual interrupts and process them. */
spin_lock(&chip->reg_lock);
if (status & NM2_PLAYBACK_INT) {
status &= ~NM2_PLAYBACK_INT;
NM2_ACK_INT(chip, NM2_PLAYBACK_INT);
snd_nm256_playback_update(chip);
}
if (status & NM2_RECORD_INT) {
status &= ~NM2_RECORD_INT;
NM2_ACK_INT(chip, NM2_RECORD_INT);
snd_nm256_capture_update(chip);
}
if (status & NM2_MISC_INT_1) {
status &= ~NM2_MISC_INT_1;
NM2_ACK_INT(chip, NM2_MISC_INT_1);
dev_dbg(chip->card->dev, "NM256: Got misc interrupt #1\n");
cbyte = snd_nm256_readb(chip, 0x400);
snd_nm256_writeb(chip, 0x400, cbyte | 2);
}
if (status & NM2_MISC_INT_2) {
status &= ~NM2_MISC_INT_2;
NM2_ACK_INT(chip, NM2_MISC_INT_2);
dev_dbg(chip->card->dev, "NM256: Got misc interrupt #2\n");
cbyte = snd_nm256_readb(chip, 0x400);
snd_nm256_writeb(chip, 0x400, cbyte & ~2);
}
/* Unknown interrupt. */
if (status) {
dev_dbg(chip->card->dev,
"NM256: Fire in the hole! Unknown status 0x%x\n",
status);
/* Pray. */
NM2_ACK_INT(chip, status);
}
spin_unlock(&chip->reg_lock);
return IRQ_HANDLED;
}
/*
* AC97 interface
*/
/*
* Waits for the mixer to become ready to be written; returns a zero value
* if it timed out.
*/
static int
snd_nm256_ac97_ready(struct nm256 *chip)
{
int timeout = 10;
u32 testaddr;
u16 testb;
testaddr = chip->mixer_status_offset;
testb = chip->mixer_status_mask;
/*
* Loop around waiting for the mixer to become ready.
*/
while (timeout-- > 0) {
if ((snd_nm256_readw(chip, testaddr) & testb) == 0)
return 1;
udelay(100);
}
return 0;
}
/*
* Initial register values to be written to the AC97 mixer.
* While most of these are identical to the reset values, we do this
* so that we have most of the register contents cached--this avoids
* reading from the mixer directly (which seems to be problematic,
* probably due to ignorance).
*/
struct initialValues {
unsigned short reg;
unsigned short value;
};
static const struct initialValues nm256_ac97_init_val[] =
{
{ AC97_MASTER, 0x8000 },
{ AC97_HEADPHONE, 0x8000 },
{ AC97_MASTER_MONO, 0x8000 },
{ AC97_PC_BEEP, 0x8000 },
{ AC97_PHONE, 0x8008 },
{ AC97_MIC, 0x8000 },
{ AC97_LINE, 0x8808 },
{ AC97_CD, 0x8808 },
{ AC97_VIDEO, 0x8808 },
{ AC97_AUX, 0x8808 },
{ AC97_PCM, 0x8808 },
{ AC97_REC_SEL, 0x0000 },
{ AC97_REC_GAIN, 0x0B0B },
{ AC97_GENERAL_PURPOSE, 0x0000 },
{ AC97_3D_CONTROL, 0x8000 },
{ AC97_VENDOR_ID1, 0x8384 },
{ AC97_VENDOR_ID2, 0x7609 },
};
static int nm256_ac97_idx(unsigned short reg)
{
int i;
for (i = 0; i < ARRAY_SIZE(nm256_ac97_init_val); i++)
if (nm256_ac97_init_val[i].reg == reg)
return i;
return -1;
}
/*
* some nm256 easily crash when reading from mixer registers
* thus we're treating it as a write-only mixer and cache the
* written values
*/
static unsigned short
snd_nm256_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
{
struct nm256 *chip = ac97->private_data;
int idx = nm256_ac97_idx(reg);
if (idx < 0)
return 0;
return chip->ac97_regs[idx];
}
/*
*/
static void
snd_nm256_ac97_write(struct snd_ac97 *ac97,
unsigned short reg, unsigned short val)
{
struct nm256 *chip = ac97->private_data;
int tries = 2;
int idx = nm256_ac97_idx(reg);
u32 base;
if (idx < 0)
return;
base = chip->mixer_base;
snd_nm256_ac97_ready(chip);
/* Wait for the write to take, too. */
while (tries-- > 0) {
snd_nm256_writew(chip, base + reg, val);
msleep(1); /* a little delay here seems better.. */
if (snd_nm256_ac97_ready(chip)) {
/* successful write: set cache */
chip->ac97_regs[idx] = val;
return;
}
}
dev_dbg(chip->card->dev, "nm256: ac97 codec not ready..\n");
}
/* static resolution table */
static const struct snd_ac97_res_table nm256_res_table[] = {
{ AC97_MASTER, 0x1f1f },
{ AC97_HEADPHONE, 0x1f1f },
{ AC97_MASTER_MONO, 0x001f },
{ AC97_PC_BEEP, 0x001f },
{ AC97_PHONE, 0x001f },
{ AC97_MIC, 0x001f },
{ AC97_LINE, 0x1f1f },
{ AC97_CD, 0x1f1f },
{ AC97_VIDEO, 0x1f1f },
{ AC97_AUX, 0x1f1f },
{ AC97_PCM, 0x1f1f },
{ AC97_REC_GAIN, 0x0f0f },
{ } /* terminator */
};
/* initialize the ac97 into a known state */
static void
snd_nm256_ac97_reset(struct snd_ac97 *ac97)
{
struct nm256 *chip = ac97->private_data;
/* Reset the mixer. 'Tis magic! */
snd_nm256_writeb(chip, 0x6c0, 1);
if (! chip->reset_workaround) {
/* Dell latitude LS will lock up by this */
snd_nm256_writeb(chip, 0x6cc, 0x87);
}
if (! chip->reset_workaround_2) {
/* Dell latitude CSx will lock up by this */
snd_nm256_writeb(chip, 0x6cc, 0x80);
snd_nm256_writeb(chip, 0x6cc, 0x0);
}
if (! chip->in_resume) {
int i;
for (i = 0; i < ARRAY_SIZE(nm256_ac97_init_val); i++) {
/* preload the cache, so as to avoid even a single
* read of the mixer regs
*/
snd_nm256_ac97_write(ac97, nm256_ac97_init_val[i].reg,
nm256_ac97_init_val[i].value);
}
}
}
/* create an ac97 mixer interface */
static int
snd_nm256_mixer(struct nm256 *chip)
{
struct snd_ac97_bus *pbus;
struct snd_ac97_template ac97;
int err;
static const struct snd_ac97_bus_ops ops = {
.reset = snd_nm256_ac97_reset,
.write = snd_nm256_ac97_write,
.read = snd_nm256_ac97_read,
};
chip->ac97_regs = devm_kcalloc(chip->card->dev,
ARRAY_SIZE(nm256_ac97_init_val),
sizeof(short), GFP_KERNEL);
if (! chip->ac97_regs)
return -ENOMEM;
err = snd_ac97_bus(chip->card, 0, &ops, NULL, &pbus);
if (err < 0)
return err;
memset(&ac97, 0, sizeof(ac97));
ac97.scaps = AC97_SCAP_AUDIO; /* we support audio! */
ac97.private_data = chip;
ac97.res_table = nm256_res_table;
pbus->no_vra = 1;
err = snd_ac97_mixer(pbus, &ac97, &chip->ac97);
if (err < 0)
return err;
if (! (chip->ac97->id & (0xf0000000))) {
/* looks like an invalid id */
sprintf(chip->card->mixername, "%s AC97", chip->card->driver);
}
return 0;
}
/*
* See if the signature left by the NM256 BIOS is intact; if so, we use
* the associated address as the end of our audio buffer in the video
* RAM.
*/
static int
snd_nm256_peek_for_sig(struct nm256 *chip)
{
/* The signature is located 1K below the end of video RAM. */
void __iomem *temp;
/* Default buffer end is 5120 bytes below the top of RAM. */
unsigned long pointer_found = chip->buffer_end - 0x1400;
u32 sig;
temp = ioremap(chip->buffer_addr + chip->buffer_end - 0x400, 16);
if (temp == NULL) {
dev_err(chip->card->dev,
"Unable to scan for card signature in video RAM\n");
return -EBUSY;
}
sig = readl(temp);
if ((sig & NM_SIG_MASK) == NM_SIGNATURE) {
u32 pointer = readl(temp + 4);
/*
* If it's obviously invalid, don't use it
*/
if (pointer == 0xffffffff ||
pointer < chip->buffer_size ||
pointer > chip->buffer_end) {
dev_err(chip->card->dev,
"invalid signature found: 0x%x\n", pointer);
iounmap(temp);
return -ENODEV;
} else {
pointer_found = pointer;
dev_info(chip->card->dev,
"found card signature in video RAM: 0x%x\n",
pointer);
}
}
iounmap(temp);
chip->buffer_end = pointer_found;
return 0;
}
#ifdef CONFIG_PM_SLEEP
/*
* APM event handler, so the card is properly reinitialized after a power
* event.
*/
static int nm256_suspend(struct device *dev)
{
struct snd_card *card = dev_get_drvdata(dev);
struct nm256 *chip = card->private_data;
snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
snd_ac97_suspend(chip->ac97);
chip->coeffs_current = 0;
return 0;
}
static int nm256_resume(struct device *dev)
{
struct snd_card *card = dev_get_drvdata(dev);
struct nm256 *chip = card->private_data;
int i;
/* Perform a full reset on the hardware */
chip->in_resume = 1;
snd_nm256_init_chip(chip);
/* restore ac97 */
snd_ac97_resume(chip->ac97);
for (i = 0; i < 2; i++) {
struct nm256_stream *s = &chip->streams[i];
if (s->substream && s->suspended) {
spin_lock_irq(&chip->reg_lock);
snd_nm256_set_format(chip, s, s->substream);
spin_unlock_irq(&chip->reg_lock);
}
}
snd_power_change_state(card, SNDRV_CTL_POWER_D0);
chip->in_resume = 0;
return 0;
}
static SIMPLE_DEV_PM_OPS(nm256_pm, nm256_suspend, nm256_resume);
#define NM256_PM_OPS &nm256_pm
#else
#define NM256_PM_OPS NULL
#endif /* CONFIG_PM_SLEEP */
static void snd_nm256_free(struct snd_card *card)
{
struct nm256 *chip = card->private_data;
if (chip->streams[SNDRV_PCM_STREAM_PLAYBACK].running)
snd_nm256_playback_stop(chip);
if (chip->streams[SNDRV_PCM_STREAM_CAPTURE].running)
snd_nm256_capture_stop(chip);
}
static int
snd_nm256_create(struct snd_card *card, struct pci_dev *pci)
{
struct nm256 *chip = card->private_data;
int err, pval;
u32 addr;
err = pcim_enable_device(pci);
if (err < 0)
return err;
chip->card = card;
chip->pci = pci;
chip->use_cache = use_cache;
spin_lock_init(&chip->reg_lock);
chip->irq = -1;
mutex_init(&chip->irq_mutex);
/* store buffer sizes in bytes */
chip->streams[SNDRV_PCM_STREAM_PLAYBACK].bufsize = playback_bufsize * 1024;
chip->streams[SNDRV_PCM_STREAM_CAPTURE].bufsize = capture_bufsize * 1024;
/*
* The NM256 has two memory ports. The first port is nothing
* more than a chunk of video RAM, which is used as the I/O ring
* buffer. The second port has the actual juicy stuff (like the
* mixer and the playback engine control registers).
*/
chip->buffer_addr = pci_resource_start(pci, 0);
chip->cport_addr = pci_resource_start(pci, 1);
err = pci_request_regions(pci, card->driver);
if (err < 0)
return err;
/* Init the memory port info. */
/* remap control port (#2) */
chip->cport = devm_ioremap(&pci->dev, chip->cport_addr, NM_PORT2_SIZE);
if (!chip->cport) {
dev_err(card->dev, "unable to map control port %lx\n",
chip->cport_addr);
return -ENOMEM;
}
if (!strcmp(card->driver, "NM256AV")) {
/* Ok, try to see if this is a non-AC97 version of the hardware. */
pval = snd_nm256_readw(chip, NM_MIXER_PRESENCE);
if ((pval & NM_PRESENCE_MASK) != NM_PRESENCE_VALUE) {
if (! force_ac97) {
dev_err(card->dev,
"no ac97 is found!\n");
dev_err(card->dev,
"force the driver to load by passing in the module parameter\n");
dev_err(card->dev,
" force_ac97=1\n");
dev_err(card->dev,
"or try sb16, opl3sa2, or cs423x drivers instead.\n");
return -ENXIO;
}
}
chip->buffer_end = 2560 * 1024;
chip->interrupt = snd_nm256_interrupt;
chip->mixer_status_offset = NM_MIXER_STATUS_OFFSET;
chip->mixer_status_mask = NM_MIXER_READY_MASK;
} else {
/* Not sure if there is any relevant detect for the ZX or not. */
if (snd_nm256_readb(chip, 0xa0b) != 0)
chip->buffer_end = 6144 * 1024;
else
chip->buffer_end = 4096 * 1024;
chip->interrupt = snd_nm256_interrupt_zx;
chip->mixer_status_offset = NM2_MIXER_STATUS_OFFSET;
chip->mixer_status_mask = NM2_MIXER_READY_MASK;
}
chip->buffer_size = chip->streams[SNDRV_PCM_STREAM_PLAYBACK].bufsize +
chip->streams[SNDRV_PCM_STREAM_CAPTURE].bufsize;
if (chip->use_cache)
chip->buffer_size += NM_TOTAL_COEFF_COUNT * 4;
else
chip->buffer_size += NM_MAX_PLAYBACK_COEF_SIZE + NM_MAX_RECORD_COEF_SIZE;
if (buffer_top >= chip->buffer_size && buffer_top < chip->buffer_end)
chip->buffer_end = buffer_top;
else {
/* get buffer end pointer from signature */
err = snd_nm256_peek_for_sig(chip);
if (err < 0)
return err;
}
chip->buffer_start = chip->buffer_end - chip->buffer_size;
chip->buffer_addr += chip->buffer_start;
dev_info(card->dev, "Mapping port 1 from 0x%x - 0x%x\n",
chip->buffer_start, chip->buffer_end);
chip->buffer = devm_ioremap(&pci->dev, chip->buffer_addr,
chip->buffer_size);
if (!chip->buffer) {
dev_err(card->dev, "unable to map ring buffer at %lx\n",
chip->buffer_addr);
return -ENOMEM;
}
/* set offsets */
addr = chip->buffer_start;
chip->streams[SNDRV_PCM_STREAM_PLAYBACK].buf = addr;
addr += chip->streams[SNDRV_PCM_STREAM_PLAYBACK].bufsize;
chip->streams[SNDRV_PCM_STREAM_CAPTURE].buf = addr;
addr += chip->streams[SNDRV_PCM_STREAM_CAPTURE].bufsize;
if (chip->use_cache) {
chip->all_coeff_buf = addr;
} else {
chip->coeff_buf[SNDRV_PCM_STREAM_PLAYBACK] = addr;
addr += NM_MAX_PLAYBACK_COEF_SIZE;
chip->coeff_buf[SNDRV_PCM_STREAM_CAPTURE] = addr;
}
/* Fixed setting. */
chip->mixer_base = NM_MIXER_OFFSET;
chip->coeffs_current = 0;
snd_nm256_init_chip(chip);
// pci_set_master(pci); /* needed? */
return 0;
}
enum { NM_IGNORED, NM_RESET_WORKAROUND, NM_RESET_WORKAROUND_2 };
static const struct snd_pci_quirk nm256_quirks[] = {
/* HP omnibook 4150 has cs4232 codec internally */
SND_PCI_QUIRK(0x103c, 0x0007, "HP omnibook 4150", NM_IGNORED),
/* Reset workarounds to avoid lock-ups */
SND_PCI_QUIRK(0x104d, 0x8041, "Sony PCG-F305", NM_RESET_WORKAROUND),
SND_PCI_QUIRK(0x1028, 0x0080, "Dell Latitude LS", NM_RESET_WORKAROUND),
SND_PCI_QUIRK(0x1028, 0x0091, "Dell Latitude CSx", NM_RESET_WORKAROUND_2),
{ } /* terminator */
};
static int snd_nm256_probe(struct pci_dev *pci,
const struct pci_device_id *pci_id)
{
struct snd_card *card;
struct nm256 *chip;
int err;
const struct snd_pci_quirk *q;
q = snd_pci_quirk_lookup(pci, nm256_quirks);
if (q) {
dev_dbg(&pci->dev, "Enabled quirk for %s.\n",
snd_pci_quirk_name(q));
switch (q->value) {
case NM_IGNORED:
dev_info(&pci->dev,
"The device is on the denylist. Loading stopped\n");
return -ENODEV;
case NM_RESET_WORKAROUND_2:
reset_workaround_2 = 1;
fallthrough;
case NM_RESET_WORKAROUND:
reset_workaround = 1;
break;
}
}
err = snd_devm_card_new(&pci->dev, index, id, THIS_MODULE,
sizeof(*chip), &card);
if (err < 0)
return err;
chip = card->private_data;
switch (pci->device) {
case PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO:
strcpy(card->driver, "NM256AV");
break;
case PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO:
strcpy(card->driver, "NM256ZX");
break;
case PCI_DEVICE_ID_NEOMAGIC_NM256XL_PLUS_AUDIO:
strcpy(card->driver, "NM256XL+");
break;
default:
dev_err(&pci->dev, "invalid device id 0x%x\n", pci->device);
return -EINVAL;
}
if (vaio_hack)
buffer_top = 0x25a800; /* this avoids conflicts with XFree86 server */
if (playback_bufsize < 4)
playback_bufsize = 4;
if (playback_bufsize > 128)
playback_bufsize = 128;
if (capture_bufsize < 4)
capture_bufsize = 4;
if (capture_bufsize > 128)
capture_bufsize = 128;
err = snd_nm256_create(card, pci);
if (err < 0)
return err;
if (reset_workaround) {
dev_dbg(&pci->dev, "reset_workaround activated\n");
chip->reset_workaround = 1;
}
if (reset_workaround_2) {
dev_dbg(&pci->dev, "reset_workaround_2 activated\n");
chip->reset_workaround_2 = 1;
}
err = snd_nm256_pcm(chip, 0);
if (err < 0)
return err;
err = snd_nm256_mixer(chip);
if (err < 0)
return err;
sprintf(card->shortname, "NeoMagic %s", card->driver);
sprintf(card->longname, "%s at 0x%lx & 0x%lx, irq %d",
card->shortname,
chip->buffer_addr, chip->cport_addr, chip->irq);
err = snd_card_register(card);
if (err < 0)
return err;
card->private_free = snd_nm256_free;
pci_set_drvdata(pci, card);
return 0;
}
static struct pci_driver nm256_driver = {
.name = KBUILD_MODNAME,
.id_table = snd_nm256_ids,
.probe = snd_nm256_probe,
.driver = {
.pm = NM256_PM_OPS,
},
};
module_pci_driver(nm256_driver);