microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/fs/overlayfs/overlayfs.h

242 строки
8.0 KiB
C
Исходник Обычный вид История

overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 02:14:38 +04:00
/*
*
* Copyright (C) 2011 Novell Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/kernel.h>
enum ovl_path_type {
ovl: get rid of PURE type The remainging uses of __OVL_PATH_PURE can be replaced by ovl_dentry_is_opaque(). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 13:02:55 +03:00
__OVL_PATH_UPPER = (1 << 0),
__OVL_PATH_MERGE = (1 << 1),
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 02:14:38 +04:00
};
ovl: make path-type a bitmap OVL_PATH_PURE_UPPER -> __OVL_PATH_UPPER | __OVL_PATH_PURE OVL_PATH_UPPER -> __OVL_PATH_UPPER OVL_PATH_MERGE -> __OVL_PATH_UPPER | __OVL_PATH_MERGE OVL_PATH_LOWER -> 0 Multiple R/O layers will allow __OVL_PATH_MERGE without __OVL_PATH_UPPER. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-12-13 02:59:42 +03:00
#define OVL_TYPE_UPPER(type) ((type) & __OVL_PATH_UPPER)
#define OVL_TYPE_MERGE(type) ((type) & __OVL_PATH_MERGE)
ovl: fix POSIX ACL setting Setting POSIX ACL needs special handling: 1) Some permission checks are done by ->setxattr() which now uses mounter's creds ("ovl: do operations on underlying file system in mounter's context"). These permission checks need to be done with current cred as well. 2) Setting ACL can fail for various reasons. We do not need to copy up in these cases. In the mean time switch to using generic_setxattr. [Arnd Bergmann] Fix link error without POSIX ACL. posix_acl_from_xattr() doesn't have a 'static inline' implementation when CONFIG_FS_POSIX_ACL is disabled, and I could not come up with an obvious way to do it. This instead avoids the link error by defining two sets of ACL operations and letting the compiler drop one of the two at compile time depending on CONFIG_FS_POSIX_ACL. This avoids all references to the ACL code, also leading to smaller code. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 13:05:24 +03:00
ovl: Fix OVL_XATTR_PREFIX Make sure ovl_own_xattr_handler only matches attribute names starting with "overlay.", not "overlayXXX". Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Fixes: d837a49bd57f ("ovl: fix POSIX ACL setting") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-08-22 18:59:22 +03:00
#define OVL_XATTR_PREFIX XATTR_TRUSTED_PREFIX "overlay."
#define OVL_XATTR_OPAQUE OVL_XATTR_PREFIX "opaque"
ovl: lookup redirects If a directory has the "trusted.overlay.redirect" xattr, it means that the value of the xattr should be used to find the underlying directory on the next lower layer. The redirect may be relative or absolute. Absolute redirects begin with a slash. A relative redirect means: instead of the current dentry's name use the value of the redirect to find the directory in the next lower layer. Relative redirects must not contain a slash. An absolute redirect means: look up the directory relative to the root of the overlay using the value of the redirect in the next lower layer. Redirects work on lower layers as well. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 13:02:56 +03:00
#define OVL_XATTR_REDIRECT OVL_XATTR_PREFIX "redirect"
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 02:14:38 +04:00
ovl: store real inode pointer in ->i_private To get from overlay inode to real inode we currently use 'struct ovl_entry', which has lifetime connected to overlay dentry. This is okay, since each overlay dentry had a new overlay inode allocated. Following patch will break that assumption, so need to leave out ovl_entry. This patch stores the real inode directly in i_private, with the lowest bit used to indicate whether the inode is upper or lower. Lifetime rules remain, using ovl_inode_real() must only be done while caller holds ref on overlay dentry (and hence on real dentry), or within RCU protected regions. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 13:05:24 +03:00
#define OVL_ISUPPER_MASK 1UL
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 02:14:38 +04:00
static inline int ovl_do_rmdir(struct inode *dir, struct dentry *dentry)
{
int err = vfs_rmdir(dir, dentry);
pr_debug("rmdir(%pd2) = %i\n", dentry, err);
return err;
}
static inline int ovl_do_unlink(struct inode *dir, struct dentry *dentry)
{
int err = vfs_unlink(dir, dentry, NULL);
pr_debug("unlink(%pd2) = %i\n", dentry, err);
return err;
}
static inline int ovl_do_link(struct dentry *old_dentry, struct inode *dir,
struct dentry *new_dentry, bool debug)
{
int err = vfs_link(old_dentry, dir, new_dentry, NULL);
if (debug) {
pr_debug("link(%pd2, %pd2) = %i\n",
old_dentry, new_dentry, err);
}
return err;
}
static inline int ovl_do_create(struct inode *dir, struct dentry *dentry,
umode_t mode, bool debug)
{
int err = vfs_create(dir, dentry, mode, true);
if (debug)
pr_debug("create(%pd2, 0%o) = %i\n", dentry, mode, err);
return err;
}
static inline int ovl_do_mkdir(struct inode *dir, struct dentry *dentry,
umode_t mode, bool debug)
{
int err = vfs_mkdir(dir, dentry, mode);
if (debug)
pr_debug("mkdir(%pd2, 0%o) = %i\n", dentry, mode, err);
return err;
}
static inline int ovl_do_mknod(struct inode *dir, struct dentry *dentry,
umode_t mode, dev_t dev, bool debug)
{
int err = vfs_mknod(dir, dentry, mode, dev);
if (debug) {
pr_debug("mknod(%pd2, 0%o, 0%o) = %i\n",
dentry, mode, dev, err);
}
return err;
}
static inline int ovl_do_symlink(struct inode *dir, struct dentry *dentry,
const char *oldname, bool debug)
{
int err = vfs_symlink(dir, dentry, oldname);
if (debug)
pr_debug("symlink(\"%s\", %pd2) = %i\n", oldname, dentry, err);
return err;
}
static inline int ovl_do_setxattr(struct dentry *dentry, const char *name,
const void *value, size_t size, int flags)
{
int err = vfs_setxattr(dentry, name, value, size, flags);
pr_debug("setxattr(%pd2, \"%s\", \"%*s\", 0x%x) = %i\n",
dentry, name, (int) size, (char *) value, flags, err);
return err;
}
static inline int ovl_do_removexattr(struct dentry *dentry, const char *name)
{
int err = vfs_removexattr(dentry, name);
pr_debug("removexattr(%pd2, \"%s\") = %i\n", dentry, name, err);
return err;
}
static inline int ovl_do_rename(struct inode *olddir, struct dentry *olddentry,
struct inode *newdir, struct dentry *newdentry,
unsigned int flags)
{
int err;
fs: rename "rename2" i_op to "rename" Generated patch: sed -i "s/\.rename2\t/\.rename\t\t/" `git grep -wl rename2` sed -i "s/\brename2\b/rename/g" `git grep -wl rename2` Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-27 12:03:58 +03:00
pr_debug("rename(%pd2, %pd2, 0x%x)\n",
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 02:14:38 +04:00
olddentry, newdentry, flags);
err = vfs_rename(olddir, olddentry, newdir, newdentry, NULL, flags);
if (err) {
fs: rename "rename2" i_op to "rename" Generated patch: sed -i "s/\.rename2\t/\.rename\t\t/" `git grep -wl rename2` sed -i "s/\brename2\b/rename/g" `git grep -wl rename2` Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-27 12:03:58 +03:00
pr_debug("...rename(%pd2, %pd2, ...) = %i\n",
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 02:14:38 +04:00
olddentry, newdentry, err);
}
return err;
}
static inline int ovl_do_whiteout(struct inode *dir, struct dentry *dentry)
{
int err = vfs_whiteout(dir, dentry);
pr_debug("whiteout(%pd2) = %i\n", dentry, err);
return err;
}
ovl: check if upperdir fs supports O_TMPFILE This is needed for choosing between concurrent copyup using O_TMPFILE and legacy copyup using workdir+rename. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-01-17 07:34:53 +03:00
static inline struct dentry *ovl_do_tmpfile(struct dentry *dentry, umode_t mode)
{
struct dentry *ret = vfs_tmpfile(dentry, mode, 0);
int err = IS_ERR(ret) ? PTR_ERR(ret) : 0;
pr_debug("tmpfile(%pd2, 0%o) = %i\n", dentry, mode, err);
return ret;
}
ovl: store real inode pointer in ->i_private To get from overlay inode to real inode we currently use 'struct ovl_entry', which has lifetime connected to overlay dentry. This is okay, since each overlay dentry had a new overlay inode allocated. Following patch will break that assumption, so need to leave out ovl_entry. This patch stores the real inode directly in i_private, with the lowest bit used to indicate whether the inode is upper or lower. Lifetime rules remain, using ovl_inode_real() must only be done while caller holds ref on overlay dentry (and hence on real dentry), or within RCU protected regions. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 13:05:24 +03:00
static inline struct inode *ovl_inode_real(struct inode *inode, bool *is_upper)
{
unsigned long x = (unsigned long) READ_ONCE(inode->i_private);
if (is_upper)
*is_upper = x & OVL_ISUPPER_MASK;
return (struct inode *) (x & ~OVL_ISUPPER_MASK);
}
ovl: split super.c fs/overlayfs/super.c is the biggest of the overlayfs source files and it contains various utility functions as well as the rather complicated lookup code. Split these parts out to separate files. Before: 1446 fs/overlayfs/super.c After: 919 fs/overlayfs/super.c 267 fs/overlayfs/namei.c 235 fs/overlayfs/util.c 51 fs/overlayfs/ovl_entry.h Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 13:02:56 +03:00
/* util.c */
int ovl_want_write(struct dentry *dentry);
void ovl_drop_write(struct dentry *dentry);
struct dentry *ovl_workdir(struct dentry *dentry);
const struct cred *ovl_override_creds(struct super_block *sb);
ovl: check if all layers are on the same fs Some features can only work when all layers are on the same fs. Test this condition during mount time, so features can check them later. Add helper ovl_same_sb() to return the common super block in case all layers are on the same fs. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-03-22 15:42:21 +03:00
struct super_block *ovl_same_sb(struct super_block *sb);
ovl: split super.c fs/overlayfs/super.c is the biggest of the overlayfs source files and it contains various utility functions as well as the rather complicated lookup code. Split these parts out to separate files. Before: 1446 fs/overlayfs/super.c After: 919 fs/overlayfs/super.c 267 fs/overlayfs/namei.c 235 fs/overlayfs/util.c 51 fs/overlayfs/ovl_entry.h Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 13:02:56 +03:00
struct ovl_entry *ovl_alloc_entry(unsigned int numlower);
bool ovl_dentry_remote(struct dentry *dentry);
bool ovl_dentry_weird(struct dentry *dentry);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 02:14:38 +04:00
enum ovl_path_type ovl_path_type(struct dentry *dentry);
void ovl_path_upper(struct dentry *dentry, struct path *path);
void ovl_path_lower(struct dentry *dentry, struct path *path);
enum ovl_path_type ovl_path_real(struct dentry *dentry, struct path *path);
struct dentry *ovl_dentry_upper(struct dentry *dentry);
struct dentry *ovl_dentry_lower(struct dentry *dentry);
struct dentry *ovl_dentry_real(struct dentry *dentry);
struct ovl_dir_cache *ovl_dir_cache(struct dentry *dentry);
void ovl_set_dir_cache(struct dentry *dentry, struct ovl_dir_cache *cache);
bool ovl_dentry_is_opaque(struct dentry *dentry);
ovl: add ovl_dentry_is_whiteout() And use it instead of ovl_dentry_is_opaque() where appropriate. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 13:02:55 +03:00
bool ovl_dentry_is_whiteout(struct dentry *dentry);
ovl: opaque cleanup oe->opaque is set for a) whiteouts b) directories having the "trusted.overlay.opaque" xattr Case b can be simplified, since setting the xattr always implies setting oe->opaque. Also once set, the opaque flag is never cleared. Don't need to set opaque flag for non-directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 13:02:57 +03:00
void ovl_dentry_set_opaque(struct dentry *dentry);
ovl: redirect on rename-dir Current code returns EXDEV when a directory would need to be copied up to move. We could copy up the directory tree in this case, but there's another, simpler solution: point to old lower directory from moved upper directory. This is achieved with a "trusted.overlay.redirect" xattr storing the path relative to the root of the overlay. After such attribute has been set, the directory can be moved without further actions required. This is a backward incompatible feature, old kernels won't be able to correctly mount an overlay containing redirected directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 13:02:56 +03:00
bool ovl_redirect_dir(struct super_block *sb);
void ovl_clear_redirect_dir(struct super_block *sb);
const char *ovl_dentry_get_redirect(struct dentry *dentry);
void ovl_dentry_set_redirect(struct dentry *dentry, const char *redirect);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 02:14:38 +04:00
void ovl_dentry_update(struct dentry *dentry, struct dentry *upperdentry);
ovl: split super.c fs/overlayfs/super.c is the biggest of the overlayfs source files and it contains various utility functions as well as the rather complicated lookup code. Split these parts out to separate files. Before: 1446 fs/overlayfs/super.c After: 919 fs/overlayfs/super.c 267 fs/overlayfs/namei.c 235 fs/overlayfs/util.c 51 fs/overlayfs/ovl_entry.h Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 13:02:56 +03:00
void ovl_inode_init(struct inode *inode, struct inode *realinode,
bool is_upper);
ovl: store real inode pointer in ->i_private To get from overlay inode to real inode we currently use 'struct ovl_entry', which has lifetime connected to overlay dentry. This is okay, since each overlay dentry had a new overlay inode allocated. Following patch will break that assumption, so need to leave out ovl_entry. This patch stores the real inode directly in i_private, with the lowest bit used to indicate whether the inode is upper or lower. Lifetime rules remain, using ovl_inode_real() must only be done while caller holds ref on overlay dentry (and hence on real dentry), or within RCU protected regions. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 13:05:24 +03:00
void ovl_inode_update(struct inode *inode, struct inode *upperinode);
ovl: split super.c fs/overlayfs/super.c is the biggest of the overlayfs source files and it contains various utility functions as well as the rather complicated lookup code. Split these parts out to separate files. Before: 1446 fs/overlayfs/super.c After: 919 fs/overlayfs/super.c 267 fs/overlayfs/namei.c 235 fs/overlayfs/util.c 51 fs/overlayfs/ovl_entry.h Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 13:02:56 +03:00
void ovl_dentry_version_inc(struct dentry *dentry);
u64 ovl_dentry_version_get(struct dentry *dentry);
bool ovl_is_whiteout(struct dentry *dentry);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 02:14:38 +04:00
struct file *ovl_path_open(struct path *path, int flags);
ovl: introduce copy up waitqueue The overlay sb 'copyup_wq' and overlay inode 'copying' condition variable are about to replace the upper sb rename_lock, as finer grained synchronization objects for concurrent copy up. Suggested-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-01-17 07:34:56 +03:00
int ovl_copy_up_start(struct dentry *dentry);
void ovl_copy_up_end(struct dentry *dentry);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 02:14:38 +04:00
ovl: split super.c fs/overlayfs/super.c is the biggest of the overlayfs source files and it contains various utility functions as well as the rather complicated lookup code. Split these parts out to separate files. Before: 1446 fs/overlayfs/super.c After: 919 fs/overlayfs/super.c 267 fs/overlayfs/namei.c 235 fs/overlayfs/util.c 51 fs/overlayfs/ovl_entry.h Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 13:02:56 +03:00
/* namei.c */
int ovl_path_next(int idx, struct dentry *dentry, struct path *path);
struct dentry *ovl_lookup(struct inode *dir, struct dentry *dentry, unsigned int flags);
bool ovl_lower_positive(struct dentry *dentry);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 02:14:38 +04:00
/* readdir.c */
extern const struct file_operations ovl_dir_operations;
int ovl_check_empty_dir(struct dentry *dentry, struct list_head *list);
void ovl_cleanup_whiteouts(struct dentry *upper, struct list_head *list);
void ovl_cache_free(struct list_head *list);
ovl: Ensure upper filesystem supports d_type In some instances xfs has been created with ftype=0 and there if a file on lower fs is removed, overlay leaves a whiteout in upper fs but that whiteout does not get filtered out and is visible to overlayfs users. And reason it does not get filtered out because upper filesystem does not report file type of whiteout as DT_CHR during iterate_dir(). So it seems to be a requirement that upper filesystem support d_type for overlayfs to work properly. Do this check during mount and fail if d_type is not supported. Suggested-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-02-22 17:28:34 +03:00
int ovl_check_d_type_supported(struct path *realpath);
ovl: proper cleanup of workdir When mounting overlayfs it needs a clean "work" directory under the supplied workdir. Previously the mount code removed this directory if it already existed and created a new one. If the removal failed (e.g. directory was not empty) then it fell back to a read-only mount not using the workdir. While this has never been reported, it is possible to get a non-empty "work" dir from a previous mount of overlayfs in case of crash in the middle of an operation using the work directory. In this case the left over state should be discarded and the overlay filesystem will be consistent, guaranteed by the atomicity of operations on moving to/from the workdir to the upper layer. This patch implements cleaning out any files left in workdir. It is implemented using real recursion for simplicity, but the depth is limited to 2, because the worst case is that of a directory containing whiteouts under "work". Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org>
2016-09-01 12:11:59 +03:00
void ovl_workdir_cleanup(struct inode *dir, struct vfsmount *mnt,
struct dentry *dentry, int level);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 02:14:38 +04:00
/* inode.c */
int ovl_setattr(struct dentry *dentry, struct iattr *attr);
int ovl_permission(struct inode *inode, int mask);
ovl: Switch to generic_removexattr Commit d837a49bd57f ("ovl: fix POSIX ACL setting") switches from iop->setxattr from ovl_setxattr to generic_setxattr, so switch from ovl_removexattr to generic_removexattr as well. As far as permission checking goes, the same rules should apply in either case. While doing that, rename ovl_setxattr to ovl_xattr_set to indicate that this is not an iop->setxattr implementation and remove the unused inode argument. Move ovl_other_xattr_set above ovl_own_xattr_set so that they match the order of handlers in ovl_xattr_handlers. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Fixes: d837a49bd57f ("ovl: fix POSIX ACL setting") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-08-22 18:22:11 +03:00
int ovl_xattr_set(struct dentry *dentry, const char *name, const void *value,
size_t size, int flags);
ovl: Switch to generic_getxattr Now that overlayfs has xattr handlers for iop->{set,remove}xattr, use those same handlers for iop->getxattr as well. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-08-22 18:52:55 +03:00
int ovl_xattr_get(struct dentry *dentry, const char *name,
void *value, size_t size);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 02:14:38 +04:00
ssize_t ovl_listxattr(struct dentry *dentry, char *list, size_t size);
ovl: define ->get_acl() for overlay inodes Now we are planning to do DAC permission checks on overlay inode itself. And to make it work, we will need to make sure we can get acls from underlying inode. So define ->get_acl() for overlay inodes and this in turn calls into underlying filesystem to get acls, if any. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-01 23:34:26 +03:00
struct posix_acl *ovl_get_acl(struct inode *inode, int type);
vfs: merge .d_select_inode() into .d_real() The two methods essentially do the same: find the real dentry/inode belonging to an overlay dentry. The difference is in the usage: vfs_open() uses ->d_select_inode() and expects the function to perform copy-up if necessary based on the open flags argument. file_dentry() uses ->d_real() passing in the overlay dentry as well as the underlying inode. vfs_rename() uses ->d_select_inode() but passes zero flags. ->d_real() with a zero inode would have worked just as well here. This patch merges the functionality of ->d_select_inode() into ->d_real() by adding an 'open_flags' argument to the latter. [Al Viro] Make the signature of d_real() match that of ->d_real() again. And constify the inode argument, while we are at it. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-06-30 09:53:27 +03:00
int ovl_open_maybe_copy_up(struct dentry *dentry, unsigned int file_flags);
ovl: update atime on upper Fix atime update logic in overlayfs. This patch adds an i_op->update_time() handler to overlayfs inodes. This forwards atime updates to the upper layer only. No atime updates are done on lower layers. Remove implicit atime updates to underlying files and directories with O_NOATIME. Remove explicit atime update in ovl_readlink(). Clear atime related mnt flags from cloned upper mount. This means atime updates are controlled purely by overlayfs mount options. Reported-by: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 13:05:23 +03:00
int ovl_update_time(struct inode *inode, struct timespec *ts, int flags);
ovl: don't copy up opaqueness When a copy up of a directory occurs which has the opaque xattr set, the xattr remains in the upper directory. The immediate behavior with overlayfs is that the upper directory is not treated as opaque, however after a remount the opaque flag is used and upper directory is treated as opaque. This causes files created in the lower layer to be hidden when using multiple lower directories. Fix by not copying up the opaque flag. To reproduce: ----8<---------8<---------8<---------8<---------8<---------8<---- mkdir -p l/d/s u v w mnt mount -t overlay overlay -olowerdir=l,upperdir=u,workdir=w mnt rm -rf mnt/d/ mkdir -p mnt/d/n umount mnt mount -t overlay overlay -olowerdir=u:l,upperdir=v,workdir=w mnt touch mnt/d/foo umount mnt mount -t overlay overlay -olowerdir=u:l,upperdir=v,workdir=w mnt ls mnt/d ----8<---------8<---------8<---------8<---------8<---------8<---- output should be: "foo n" Reported-by: Derek McGowan <dmcg@drizz.net> Link: https://bugzilla.kernel.org/show_bug.cgi?id=151291 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org>
2016-08-08 16:08:49 +03:00
bool ovl_is_private_xattr(const char *name);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 02:14:38 +04:00
ovl: treat special files like a regular fs No sense in opening special files on the underlying layers, they work just as well if opened on the overlay. Side effect is that it's no longer possible to connect one side of a pipe opened on overlayfs with the other side opened on the underlying layer. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 13:02:55 +03:00
struct inode *ovl_new_inode(struct super_block *sb, umode_t mode, dev_t rdev);
ovl: share inode for hard link Inode attributes are copied up to overlay inode (uid, gid, mode, atime, mtime, ctime) so generic code using these fields works correcty. If a hard link is created in overlayfs separate inodes are allocated for each link. If chmod/chown/etc. is performed on one of the links then the inode belonging to the other ones won't be updated. This patch attempts to fix this by sharing inodes for hard links. Use inode hash (with real inode pointer as a key) to make sure overlay inodes are shared for hard links on upper. Hard links on lower are still split (which is not user observable until the copy-up happens, see Documentation/filesystems/overlayfs.txt under "Non-standard behavior"). The inode is only inserted in the hash if it is non-directoy and upper. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 13:05:24 +03:00
struct inode *ovl_get_inode(struct super_block *sb, struct inode *realinode);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 02:14:38 +04:00
static inline void ovl_copyattr(struct inode *from, struct inode *to)
{
to->i_uid = from->i_uid;
to->i_gid = from->i_gid;
ovl: Copy up underlying inode's ->i_mode to overlay inode Right now when a new overlay inode is created, we initialize overlay inode's ->i_mode from underlying inode ->i_mode but we retain only file type bits (S_IFMT) and discard permission bits. This patch changes it and retains permission bits too. This should allow overlay to do permission checks on overlay inode itself in task context. [SzM] It also fixes clearing suid/sgid bits on write. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Reported-by: Eryu Guan <eguan@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: 4bacc9c9234c ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay") Cc: <stable@vger.kernel.org>
2016-07-01 23:34:25 +03:00
to->i_mode = from->i_mode;
ovl: update atime on upper Fix atime update logic in overlayfs. This patch adds an i_op->update_time() handler to overlayfs inodes. This forwards atime updates to the upper layer only. No atime updates are done on lower layers. Remove implicit atime updates to underlying files and directories with O_NOATIME. Remove explicit atime update in ovl_readlink(). Clear atime related mnt flags from cloned upper mount. This means atime updates are controlled purely by overlayfs mount options. Reported-by: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 13:05:23 +03:00
to->i_atime = from->i_atime;
to->i_mtime = from->i_mtime;
to->i_ctime = from->i_ctime;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 02:14:38 +04:00
}
/* dir.c */
extern const struct inode_operations ovl_dir_inode_operations;
struct dentry *ovl_lookup_temp(struct dentry *workdir, struct dentry *dentry);
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 20:33:17 +03:00
struct cattr {
dev_t rdev;
umode_t mode;
const char *link;
};
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 02:14:38 +04:00
int ovl_create_real(struct inode *dir, struct dentry *newdentry,
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 20:33:17 +03:00
struct cattr *attr,
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 02:14:38 +04:00
struct dentry *hardlink, bool debug);
void ovl_cleanup(struct inode *dir, struct dentry *dentry);
/* copy_up.c */
int ovl_copy_up(struct dentry *dentry);
ovl: fold ovl_copy_up_truncate() into ovl_copy_up() This removes code duplication. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-11-12 22:36:03 +03:00
int ovl_copy_up_flags(struct dentry *dentry, int flags);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 02:14:38 +04:00
int ovl_copy_xattr(struct dentry *old, struct dentry *new);
int ovl_set_attr(struct dentry *upper, struct kstat *stat);