2014-06-10 18:06:10 +04:00
|
|
|
menuconfig ARCH_MXC
|
ARM: use "depends on" for SoC configs instead of "if" after prompt
Many ARM sub-architectures use prompts followed by "if" conditional,
but it is wrong.
Please notice the difference between
config ARCH_FOO
bool "Foo SoCs" if ARCH_MULTI_V7
and
config ARCH_FOO
bool "Foo SoCs"
depends on ARCH_MULTI_V7
These two are *not* equivalent!
In the former statement, it is not ARCH_FOO, but its prompt that
depends on ARCH_MULTI_V7. So, it is completely valid that ARCH_FOO
is selected by another, but ARCH_MULTI_V7 is still disabled. As it is
not unmet dependency, Kconfig never warns. This is probably not what
you want.
The former should be used only when you need to do so, and you really
understand what you are doing. (In most cases, it should be wrong!)
For enabling/disabling sub-architectures, the latter is always correct.
As a good side effect, this commit fixes some entries over 80 columns
(mach-imx, mach-integrator, mach-mbevu).
[Arnd: I note that there is not really a bug here, according to
the discussion that followed, but I can see value in being consistent
and in making the lines shorter]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Krzysztof Halasa <khc@piap.pl>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-11-16 06:06:10 +03:00
|
|
|
bool "Freescale i.MX family"
|
|
|
|
|
depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M
|
2016-01-27 19:59:36 +03:00
|
|
|
select ARCH_SUPPORTS_BIG_ENDIAN
|
2015-05-15 10:41:00 +03:00
|
|
|
select CLKSRC_IMX_GPT
|
2012-09-17 05:38:39 +04:00
|
|
|
select GENERIC_IRQ_CHIP
|
2016-06-02 15:10:16 +03:00
|
|
|
select GPIOLIB
|
2013-11-16 18:25:02 +04:00
|
|
|
select PINCTRL
|
2014-01-14 18:36:47 +04:00
|
|
|
select PM_OPP if PM
|
2013-08-13 12:59:28 +04:00
|
|
|
select SOC_BUS
|
2014-02-17 21:04:17 +04:00
|
|
|
select SRAM
|
2012-09-17 05:38:39 +04:00
|
|
|
help
|
|
|
|
|
Support for Freescale MXC/iMX-based family of processors
|
|
|
|
|
|
2014-06-10 18:06:10 +04:00
|
|
|
if ARCH_MXC
|
2012-09-13 15:48:07 +04:00
|
|
|
|
|
|
|
|
config MXC_TZIC
|
|
|
|
|
bool
|
|
|
|
|
|
|
|
|
|
config MXC_AVIC
|
|
|
|
|
bool
|
|
|
|
|
|
|
|
|
|
config MXC_DEBUG_BOARD
|
|
|
|
|
bool "Enable MXC debug board(for 3-stack)"
|
2015-03-13 02:36:15 +03:00
|
|
|
depends on MACH_MX27_3DS || MACH_MX31_3DS || MACH_MX35_3DS
|
2012-09-13 15:48:07 +04:00
|
|
|
help
|
|
|
|
|
The debug board is an integral part of the MXC 3-stack(PDK)
|
|
|
|
|
platforms, it can be attached or removed from the peripheral
|
|
|
|
|
board. On debug board, several debug devices(ethernet, UART,
|
|
|
|
|
buttons, LEDs and JTAG) are implemented. Between the MCU and
|
|
|
|
|
these devices, a CPLD is added as a bridge which performs
|
|
|
|
|
data/address de-multiplexing and decode, signal level shift,
|
|
|
|
|
interrupt control and various board functions.
|
|
|
|
|
|
2013-03-21 03:39:42 +04:00
|
|
|
config HAVE_IMX_ANATOP
|
|
|
|
|
bool
|
|
|
|
|
|
2011-09-06 10:39:44 +04:00
|
|
|
config HAVE_IMX_GPC
|
|
|
|
|
bool
|
2015-02-23 20:40:12 +03:00
|
|
|
select PM_GENERIC_DOMAINS if PM
|
2011-09-06 10:39:44 +04:00
|
|
|
|
|
|
|
|
config HAVE_IMX_MMDC
|
|
|
|
|
bool
|
|
|
|
|
|
|
|
|
|
config HAVE_IMX_SRC
|
2012-10-23 11:23:59 +04:00
|
|
|
def_bool y if SMP
|
2013-03-28 20:35:19 +04:00
|
|
|
select ARCH_HAS_RESET_CONTROLLER
|
2011-09-06 10:39:44 +04:00
|
|
|
|
2012-09-13 09:26:00 +04:00
|
|
|
config IMX_HAVE_IOMUX_V1
|
|
|
|
|
bool
|
|
|
|
|
|
|
|
|
|
config ARCH_MXC_IOMUX_V3
|
|
|
|
|
bool
|
|
|
|
|
|
2010-11-11 20:06:17 +03:00
|
|
|
config SOC_IMX21
|
|
|
|
|
bool
|
ARM: config: sort select statements alphanumerically
As suggested by Andrew Morton:
This is a pet peeve of mine. Any time there's a long list of items
(header file inclusions, kconfig entries, array initalisers, etc) and
someone wants to add a new item, they *always* go and stick it at the
end of the list.
Guys, don't do this. Either put the new item into a randomly-chosen
position or, probably better, alphanumerically sort the list.
lets sort all our select statements alphanumerically. This commit was
created by the following perl:
while (<>) {
while (/\\\s*$/) {
$_ .= <>;
}
undef %selects if /^\s*config\s+/;
if (/^\s+select\s+(\w+).*/) {
if (defined($selects{$1})) {
if ($selects{$1} eq $_) {
print STDERR "Warning: removing duplicated $1 entry\n";
} else {
print STDERR "Error: $1 differently selected\n".
"\tOld: $selects{$1}\n".
"\tNew: $_\n";
exit 1;
}
}
$selects{$1} = $_;
next;
}
if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
/^endif/ or /^endchoice/)) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
undef %selects;
}
print;
}
if (%selects) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
}
It found two duplicates:
Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry
and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.
We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-06 20:12:25 +04:00
|
|
|
select CPU_ARM926T
|
2010-11-11 20:06:17 +03:00
|
|
|
select IMX_HAVE_IOMUX_V1
|
2010-11-05 11:37:22 +03:00
|
|
|
select MXC_AVIC
|
2010-11-11 20:06:17 +03:00
|
|
|
|
|
|
|
|
config SOC_IMX27
|
|
|
|
|
bool
|
ARM: config: sort select statements alphanumerically
As suggested by Andrew Morton:
This is a pet peeve of mine. Any time there's a long list of items
(header file inclusions, kconfig entries, array initalisers, etc) and
someone wants to add a new item, they *always* go and stick it at the
end of the list.
Guys, don't do this. Either put the new item into a randomly-chosen
position or, probably better, alphanumerically sort the list.
lets sort all our select statements alphanumerically. This commit was
created by the following perl:
while (<>) {
while (/\\\s*$/) {
$_ .= <>;
}
undef %selects if /^\s*config\s+/;
if (/^\s+select\s+(\w+).*/) {
if (defined($selects{$1})) {
if ($selects{$1} eq $_) {
print STDERR "Warning: removing duplicated $1 entry\n";
} else {
print STDERR "Error: $1 differently selected\n".
"\tOld: $selects{$1}\n".
"\tNew: $_\n";
exit 1;
}
}
$selects{$1} = $_;
next;
}
if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
/^endif/ or /^endchoice/)) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
undef %selects;
}
print;
}
if (%selects) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
}
It found two duplicates:
Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry
and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.
We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-06 20:12:25 +04:00
|
|
|
select CPU_ARM926T
|
2010-11-11 20:06:17 +03:00
|
|
|
select IMX_HAVE_IOMUX_V1
|
2010-11-05 11:37:22 +03:00
|
|
|
select MXC_AVIC
|
2013-11-12 12:50:10 +04:00
|
|
|
select PINCTRL_IMX27
|
2010-11-11 20:06:17 +03:00
|
|
|
|
2011-03-17 11:40:29 +03:00
|
|
|
config SOC_IMX31
|
|
|
|
|
bool
|
|
|
|
|
select CPU_V6
|
|
|
|
|
select MXC_AVIC
|
|
|
|
|
|
|
|
|
|
config SOC_IMX35
|
|
|
|
|
bool
|
|
|
|
|
select ARCH_MXC_IOMUX_V3
|
|
|
|
|
select MXC_AVIC
|
2014-01-10 19:40:39 +04:00
|
|
|
select PINCTRL_IMX35
|
2011-03-17 11:40:29 +03:00
|
|
|
|
2012-09-17 05:38:39 +04:00
|
|
|
if ARCH_MULTI_V5
|
|
|
|
|
|
2010-06-14 18:56:46 +04:00
|
|
|
comment "MX21 platforms:"
|
2008-07-05 12:03:00 +04:00
|
|
|
|
2009-04-15 17:39:27 +04:00
|
|
|
config MACH_MX21ADS
|
|
|
|
|
bool "MX21ADS platform"
|
2010-11-04 19:07:48 +03:00
|
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
2010-06-22 19:59:58 +04:00
|
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
2010-11-05 19:26:09 +03:00
|
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
2010-06-16 13:17:45 +04:00
|
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
ARM: config: sort select statements alphanumerically
As suggested by Andrew Morton:
This is a pet peeve of mine. Any time there's a long list of items
(header file inclusions, kconfig entries, array initalisers, etc) and
someone wants to add a new item, they *always* go and stick it at the
end of the list.
Guys, don't do this. Either put the new item into a randomly-chosen
position or, probably better, alphanumerically sort the list.
lets sort all our select statements alphanumerically. This commit was
created by the following perl:
while (<>) {
while (/\\\s*$/) {
$_ .= <>;
}
undef %selects if /^\s*config\s+/;
if (/^\s+select\s+(\w+).*/) {
if (defined($selects{$1})) {
if ($selects{$1} eq $_) {
print STDERR "Warning: removing duplicated $1 entry\n";
} else {
print STDERR "Error: $1 differently selected\n".
"\tOld: $selects{$1}\n".
"\tNew: $_\n";
exit 1;
}
}
$selects{$1} = $_;
next;
}
if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
/^endif/ or /^endchoice/)) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
undef %selects;
}
print;
}
if (%selects) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
}
It found two duplicates:
Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry
and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.
We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-06 20:12:25 +04:00
|
|
|
select SOC_IMX21
|
2009-04-15 17:39:27 +04:00
|
|
|
help
|
|
|
|
|
Include support for MX21ADS platform. This includes specific
|
|
|
|
|
configurations for the board and its peripherals.
|
|
|
|
|
|
2010-06-14 18:56:46 +04:00
|
|
|
comment "MX27 platforms:"
|
|
|
|
|
|
2008-07-05 12:03:00 +04:00
|
|
|
config MACH_MX27ADS
|
|
|
|
|
bool "MX27ADS platform"
|
2010-11-04 19:07:48 +03:00
|
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
2010-06-16 19:25:40 +04:00
|
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
2010-06-23 11:36:01 +04:00
|
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
2010-11-05 19:26:09 +03:00
|
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
2010-06-16 09:35:31 +04:00
|
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
2010-10-29 12:56:07 +04:00
|
|
|
select IMX_HAVE_PLATFORM_MXC_W1
|
ARM: config: sort select statements alphanumerically
As suggested by Andrew Morton:
This is a pet peeve of mine. Any time there's a long list of items
(header file inclusions, kconfig entries, array initalisers, etc) and
someone wants to add a new item, they *always* go and stick it at the
end of the list.
Guys, don't do this. Either put the new item into a randomly-chosen
position or, probably better, alphanumerically sort the list.
lets sort all our select statements alphanumerically. This commit was
created by the following perl:
while (<>) {
while (/\\\s*$/) {
$_ .= <>;
}
undef %selects if /^\s*config\s+/;
if (/^\s+select\s+(\w+).*/) {
if (defined($selects{$1})) {
if ($selects{$1} eq $_) {
print STDERR "Warning: removing duplicated $1 entry\n";
} else {
print STDERR "Error: $1 differently selected\n".
"\tOld: $selects{$1}\n".
"\tNew: $_\n";
exit 1;
}
}
$selects{$1} = $_;
next;
}
if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
/^endif/ or /^endchoice/)) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
undef %selects;
}
print;
}
if (%selects) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
}
It found two duplicates:
Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry
and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.
We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-06 20:12:25 +04:00
|
|
|
select SOC_IMX27
|
2008-07-05 12:03:00 +04:00
|
|
|
help
|
|
|
|
|
Include support for MX27ADS platform. This includes specific
|
|
|
|
|
configurations for the board and its peripherals.
|
2008-07-05 12:03:00 +04:00
|
|
|
|
2009-04-16 23:45:01 +04:00
|
|
|
config MACH_MX27_3DS
|
|
|
|
|
bool "MX27PDK platform"
|
2010-12-22 17:25:31 +03:00
|
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
2010-12-07 22:14:45 +03:00
|
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
2011-06-22 16:25:25 +04:00
|
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
2011-03-01 22:59:46 +03:00
|
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
2010-11-10 11:58:56 +03:00
|
|
|
select IMX_HAVE_PLATFORM_IMX_KEYPAD
|
2012-07-03 22:44:57 +04:00
|
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
2010-06-23 11:36:01 +04:00
|
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
2012-02-16 01:36:10 +04:00
|
|
|
select IMX_HAVE_PLATFORM_MX2_CAMERA
|
2010-12-22 17:25:31 +03:00
|
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
2010-11-05 19:26:09 +03:00
|
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
2011-01-03 16:16:39 +03:00
|
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
2011-01-10 23:17:37 +03:00
|
|
|
select MXC_DEBUG_BOARD
|
2013-06-06 16:41:57 +04:00
|
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
ARM: config: sort select statements alphanumerically
As suggested by Andrew Morton:
This is a pet peeve of mine. Any time there's a long list of items
(header file inclusions, kconfig entries, array initalisers, etc) and
someone wants to add a new item, they *always* go and stick it at the
end of the list.
Guys, don't do this. Either put the new item into a randomly-chosen
position or, probably better, alphanumerically sort the list.
lets sort all our select statements alphanumerically. This commit was
created by the following perl:
while (<>) {
while (/\\\s*$/) {
$_ .= <>;
}
undef %selects if /^\s*config\s+/;
if (/^\s+select\s+(\w+).*/) {
if (defined($selects{$1})) {
if ($selects{$1} eq $_) {
print STDERR "Warning: removing duplicated $1 entry\n";
} else {
print STDERR "Error: $1 differently selected\n".
"\tOld: $selects{$1}\n".
"\tNew: $_\n";
exit 1;
}
}
$selects{$1} = $_;
next;
}
if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
/^endif/ or /^endchoice/)) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
undef %selects;
}
print;
}
if (%selects) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
}
It found two duplicates:
Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry
and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.
We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-06 20:12:25 +04:00
|
|
|
select SOC_IMX27
|
2009-04-16 23:45:01 +04:00
|
|
|
help
|
|
|
|
|
Include support for MX27PDK platform. This includes specific
|
|
|
|
|
configurations for the board and its peripherals.
|
2009-06-04 01:23:54 +04:00
|
|
|
|
2010-07-30 12:06:01 +04:00
|
|
|
config MACH_IMX27_VISSTRIM_M10
|
|
|
|
|
bool "Vista Silicon i.MX27 Visstrim_m10"
|
2011-02-28 20:04:33 +03:00
|
|
|
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
2010-07-30 12:06:01 +04:00
|
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
2011-03-18 14:24:08 +03:00
|
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
2010-07-30 12:06:01 +04:00
|
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
2012-02-28 20:31:51 +04:00
|
|
|
select IMX_HAVE_PLATFORM_MX2_CAMERA
|
2012-09-05 15:06:15 +04:00
|
|
|
select IMX_HAVE_PLATFORM_MX2_EMMA
|
2010-11-05 20:52:09 +03:00
|
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
2012-02-28 20:31:48 +04:00
|
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
2012-02-29 16:17:33 +04:00
|
|
|
select LEDS_GPIO_REGISTER
|
ARM: config: sort select statements alphanumerically
As suggested by Andrew Morton:
This is a pet peeve of mine. Any time there's a long list of items
(header file inclusions, kconfig entries, array initalisers, etc) and
someone wants to add a new item, they *always* go and stick it at the
end of the list.
Guys, don't do this. Either put the new item into a randomly-chosen
position or, probably better, alphanumerically sort the list.
lets sort all our select statements alphanumerically. This commit was
created by the following perl:
while (<>) {
while (/\\\s*$/) {
$_ .= <>;
}
undef %selects if /^\s*config\s+/;
if (/^\s+select\s+(\w+).*/) {
if (defined($selects{$1})) {
if ($selects{$1} eq $_) {
print STDERR "Warning: removing duplicated $1 entry\n";
} else {
print STDERR "Error: $1 differently selected\n".
"\tOld: $selects{$1}\n".
"\tNew: $_\n";
exit 1;
}
}
$selects{$1} = $_;
next;
}
if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
/^endif/ or /^endchoice/)) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
undef %selects;
}
print;
}
if (%selects) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
}
It found two duplicates:
Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry
and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.
We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-06 20:12:25 +04:00
|
|
|
select SOC_IMX27
|
2010-07-30 12:06:01 +04:00
|
|
|
help
|
|
|
|
|
Include support for Visstrim_m10 platform and its different variants.
|
|
|
|
|
This includes specific configurations for the board and its
|
|
|
|
|
peripherals.
|
|
|
|
|
|
2009-08-06 13:19:39 +04:00
|
|
|
config MACH_PCA100
|
|
|
|
|
bool "Phytec phyCARD-s (pca100)"
|
2010-11-09 19:52:14 +03:00
|
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
2010-11-04 12:09:10 +03:00
|
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
2010-11-04 19:07:48 +03:00
|
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
2010-06-16 19:25:40 +04:00
|
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
2010-08-25 19:37:45 +04:00
|
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
2010-06-23 11:36:01 +04:00
|
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
2010-11-05 20:52:09 +03:00
|
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
2010-11-05 19:26:09 +03:00
|
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
2010-06-16 09:35:31 +04:00
|
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
2010-10-29 12:56:07 +04:00
|
|
|
select IMX_HAVE_PLATFORM_MXC_W1
|
2010-06-22 11:00:22 +04:00
|
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
2013-06-06 16:41:57 +04:00
|
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
ARM: config: sort select statements alphanumerically
As suggested by Andrew Morton:
This is a pet peeve of mine. Any time there's a long list of items
(header file inclusions, kconfig entries, array initalisers, etc) and
someone wants to add a new item, they *always* go and stick it at the
end of the list.
Guys, don't do this. Either put the new item into a randomly-chosen
position or, probably better, alphanumerically sort the list.
lets sort all our select statements alphanumerically. This commit was
created by the following perl:
while (<>) {
while (/\\\s*$/) {
$_ .= <>;
}
undef %selects if /^\s*config\s+/;
if (/^\s+select\s+(\w+).*/) {
if (defined($selects{$1})) {
if ($selects{$1} eq $_) {
print STDERR "Warning: removing duplicated $1 entry\n";
} else {
print STDERR "Error: $1 differently selected\n".
"\tOld: $selects{$1}\n".
"\tNew: $_\n";
exit 1;
}
}
$selects{$1} = $_;
next;
}
if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
/^endif/ or /^endchoice/)) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
undef %selects;
}
print;
}
if (%selects) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
}
It found two duplicates:
Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry
and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.
We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-06 20:12:25 +04:00
|
|
|
select SOC_IMX27
|
2009-08-06 13:19:39 +04:00
|
|
|
help
|
|
|
|
|
Include support for phyCARD-s (aka pca100) platform. This
|
|
|
|
|
includes specific configurations for the module and its peripherals.
|
|
|
|
|
|
2012-02-29 00:57:50 +04:00
|
|
|
config MACH_IMX27_DT
|
|
|
|
|
bool "Support i.MX27 platforms from device tree"
|
|
|
|
|
select SOC_IMX27
|
|
|
|
|
help
|
|
|
|
|
Include support for Freescale i.MX27 based platforms
|
|
|
|
|
using the device tree for discovery
|
|
|
|
|
|
2009-01-29 16:42:25 +03:00
|
|
|
endif
|
2011-03-17 11:40:29 +03:00
|
|
|
|
2012-09-17 05:38:39 +04:00
|
|
|
if ARCH_MULTI_V6
|
2011-03-17 11:40:29 +03:00
|
|
|
|
|
|
|
|
comment "MX31 platforms:"
|
|
|
|
|
|
|
|
|
|
config MACH_MX31ADS
|
|
|
|
|
bool "Support MX31ADS platforms"
|
ARM: config: sort select statements alphanumerically
As suggested by Andrew Morton:
This is a pet peeve of mine. Any time there's a long list of items
(header file inclusions, kconfig entries, array initalisers, etc) and
someone wants to add a new item, they *always* go and stick it at the
end of the list.
Guys, don't do this. Either put the new item into a randomly-chosen
position or, probably better, alphanumerically sort the list.
lets sort all our select statements alphanumerically. This commit was
created by the following perl:
while (<>) {
while (/\\\s*$/) {
$_ .= <>;
}
undef %selects if /^\s*config\s+/;
if (/^\s+select\s+(\w+).*/) {
if (defined($selects{$1})) {
if ($selects{$1} eq $_) {
print STDERR "Warning: removing duplicated $1 entry\n";
} else {
print STDERR "Error: $1 differently selected\n".
"\tOld: $selects{$1}\n".
"\tNew: $_\n";
exit 1;
}
}
$selects{$1} = $_;
next;
}
if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
/^endif/ or /^endchoice/)) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
undef %selects;
}
print;
}
if (%selects) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
}
It found two duplicates:
Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry
and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.
We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-06 20:12:25 +04:00
|
|
|
default y
|
2011-03-17 11:40:29 +03:00
|
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
|
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
|
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
ARM: config: sort select statements alphanumerically
As suggested by Andrew Morton:
This is a pet peeve of mine. Any time there's a long list of items
(header file inclusions, kconfig entries, array initalisers, etc) and
someone wants to add a new item, they *always* go and stick it at the
end of the list.
Guys, don't do this. Either put the new item into a randomly-chosen
position or, probably better, alphanumerically sort the list.
lets sort all our select statements alphanumerically. This commit was
created by the following perl:
while (<>) {
while (/\\\s*$/) {
$_ .= <>;
}
undef %selects if /^\s*config\s+/;
if (/^\s+select\s+(\w+).*/) {
if (defined($selects{$1})) {
if ($selects{$1} eq $_) {
print STDERR "Warning: removing duplicated $1 entry\n";
} else {
print STDERR "Error: $1 differently selected\n".
"\tOld: $selects{$1}\n".
"\tNew: $_\n";
exit 1;
}
}
$selects{$1} = $_;
next;
}
if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
/^endif/ or /^endchoice/)) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
undef %selects;
}
print;
}
if (%selects) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
}
It found two duplicates:
Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry
and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.
We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-06 20:12:25 +04:00
|
|
|
select SOC_IMX31
|
2011-03-17 11:40:29 +03:00
|
|
|
help
|
|
|
|
|
Include support for MX31ADS platform. This includes specific
|
|
|
|
|
configurations for the board and its peripherals.
|
|
|
|
|
|
|
|
|
|
config MACH_MX31ADS_WM1133_EV1
|
|
|
|
|
bool "Support Wolfson Microelectronics 1133-EV1 module"
|
|
|
|
|
depends on MACH_MX31ADS
|
|
|
|
|
depends on MFD_WM8350_I2C
|
2013-02-14 20:45:58 +04:00
|
|
|
depends on REGULATOR_WM8350 = y
|
2011-03-17 11:40:29 +03:00
|
|
|
help
|
|
|
|
|
Include support for the Wolfson Microelectronics 1133-EV1 PMU
|
|
|
|
|
and audio module for the MX31ADS platform.
|
|
|
|
|
|
|
|
|
|
config MACH_MX31LILLY
|
|
|
|
|
bool "Support MX31 LILLY-1131 platforms (INCO startec)"
|
|
|
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
|
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
|
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
|
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
|
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
2013-06-06 16:41:57 +04:00
|
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
ARM: config: sort select statements alphanumerically
As suggested by Andrew Morton:
This is a pet peeve of mine. Any time there's a long list of items
(header file inclusions, kconfig entries, array initalisers, etc) and
someone wants to add a new item, they *always* go and stick it at the
end of the list.
Guys, don't do this. Either put the new item into a randomly-chosen
position or, probably better, alphanumerically sort the list.
lets sort all our select statements alphanumerically. This commit was
created by the following perl:
while (<>) {
while (/\\\s*$/) {
$_ .= <>;
}
undef %selects if /^\s*config\s+/;
if (/^\s+select\s+(\w+).*/) {
if (defined($selects{$1})) {
if ($selects{$1} eq $_) {
print STDERR "Warning: removing duplicated $1 entry\n";
} else {
print STDERR "Error: $1 differently selected\n".
"\tOld: $selects{$1}\n".
"\tNew: $_\n";
exit 1;
}
}
$selects{$1} = $_;
next;
}
if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
/^endif/ or /^endchoice/)) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
undef %selects;
}
print;
}
if (%selects) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
}
It found two duplicates:
Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry
and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.
We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-06 20:12:25 +04:00
|
|
|
select SOC_IMX31
|
2011-03-17 11:40:29 +03:00
|
|
|
help
|
|
|
|
|
Include support for mx31 based LILLY1131 modules. This includes
|
|
|
|
|
specific configurations for the board and its peripherals.
|
|
|
|
|
|
|
|
|
|
config MACH_MX31LITE
|
|
|
|
|
bool "Support MX31 LITEKIT (LogicPD)"
|
|
|
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
|
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
|
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
|
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
|
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
|
|
|
select IMX_HAVE_PLATFORM_MXC_RTC
|
|
|
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
2011-05-28 23:05:01 +04:00
|
|
|
select LEDS_GPIO_REGISTER
|
2013-06-06 16:41:57 +04:00
|
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
ARM: config: sort select statements alphanumerically
As suggested by Andrew Morton:
This is a pet peeve of mine. Any time there's a long list of items
(header file inclusions, kconfig entries, array initalisers, etc) and
someone wants to add a new item, they *always* go and stick it at the
end of the list.
Guys, don't do this. Either put the new item into a randomly-chosen
position or, probably better, alphanumerically sort the list.
lets sort all our select statements alphanumerically. This commit was
created by the following perl:
while (<>) {
while (/\\\s*$/) {
$_ .= <>;
}
undef %selects if /^\s*config\s+/;
if (/^\s+select\s+(\w+).*/) {
if (defined($selects{$1})) {
if ($selects{$1} eq $_) {
print STDERR "Warning: removing duplicated $1 entry\n";
} else {
print STDERR "Error: $1 differently selected\n".
"\tOld: $selects{$1}\n".
"\tNew: $_\n";
exit 1;
}
}
$selects{$1} = $_;
next;
}
if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
/^endif/ or /^endchoice/)) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
undef %selects;
}
print;
}
if (%selects) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
}
It found two duplicates:
Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry
and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.
We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-06 20:12:25 +04:00
|
|
|
select SOC_IMX31
|
2011-03-17 11:40:29 +03:00
|
|
|
help
|
|
|
|
|
Include support for MX31 LITEKIT platform. This includes specific
|
|
|
|
|
configurations for the board and its peripherals.
|
|
|
|
|
|
|
|
|
|
config MACH_PCM037
|
|
|
|
|
bool "Support Phytec pcm037 (i.MX31) platforms"
|
|
|
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
|
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
|
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
|
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
|
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
|
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
|
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
|
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
|
|
|
select IMX_HAVE_PLATFORM_MXC_W1
|
2013-06-06 16:41:57 +04:00
|
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
ARM: config: sort select statements alphanumerically
As suggested by Andrew Morton:
This is a pet peeve of mine. Any time there's a long list of items
(header file inclusions, kconfig entries, array initalisers, etc) and
someone wants to add a new item, they *always* go and stick it at the
end of the list.
Guys, don't do this. Either put the new item into a randomly-chosen
position or, probably better, alphanumerically sort the list.
lets sort all our select statements alphanumerically. This commit was
created by the following perl:
while (<>) {
while (/\\\s*$/) {
$_ .= <>;
}
undef %selects if /^\s*config\s+/;
if (/^\s+select\s+(\w+).*/) {
if (defined($selects{$1})) {
if ($selects{$1} eq $_) {
print STDERR "Warning: removing duplicated $1 entry\n";
} else {
print STDERR "Error: $1 differently selected\n".
"\tOld: $selects{$1}\n".
"\tNew: $_\n";
exit 1;
}
}
$selects{$1} = $_;
next;
}
if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
/^endif/ or /^endchoice/)) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
undef %selects;
}
print;
}
if (%selects) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
}
It found two duplicates:
Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry
and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.
We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-06 20:12:25 +04:00
|
|
|
select SOC_IMX31
|
2011-03-17 11:40:29 +03:00
|
|
|
help
|
|
|
|
|
Include support for Phytec pcm037 platform. This includes
|
|
|
|
|
specific configurations for the board and its peripherals.
|
|
|
|
|
|
|
|
|
|
config MACH_PCM037_EET
|
|
|
|
|
bool "Support pcm037 EET board extensions"
|
|
|
|
|
depends on MACH_PCM037
|
|
|
|
|
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
|
|
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
|
|
|
help
|
|
|
|
|
Add support for PCM037 EET baseboard extensions. If you are using the
|
|
|
|
|
OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
|
|
|
|
|
command-line parameter.
|
|
|
|
|
|
|
|
|
|
config MACH_MX31_3DS
|
|
|
|
|
bool "Support MX31PDK (3DS)"
|
|
|
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
|
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
|
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
|
|
|
select IMX_HAVE_PLATFORM_IMX_KEYPAD
|
2012-05-21 23:09:06 +04:00
|
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
2011-03-17 11:40:29 +03:00
|
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
|
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
|
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
2011-09-14 21:04:38 +04:00
|
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
2011-03-17 11:40:29 +03:00
|
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
|
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
ARM: config: sort select statements alphanumerically
As suggested by Andrew Morton:
This is a pet peeve of mine. Any time there's a long list of items
(header file inclusions, kconfig entries, array initalisers, etc) and
someone wants to add a new item, they *always* go and stick it at the
end of the list.
Guys, don't do this. Either put the new item into a randomly-chosen
position or, probably better, alphanumerically sort the list.
lets sort all our select statements alphanumerically. This commit was
created by the following perl:
while (<>) {
while (/\\\s*$/) {
$_ .= <>;
}
undef %selects if /^\s*config\s+/;
if (/^\s+select\s+(\w+).*/) {
if (defined($selects{$1})) {
if ($selects{$1} eq $_) {
print STDERR "Warning: removing duplicated $1 entry\n";
} else {
print STDERR "Error: $1 differently selected\n".
"\tOld: $selects{$1}\n".
"\tNew: $_\n";
exit 1;
}
}
$selects{$1} = $_;
next;
}
if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
/^endif/ or /^endchoice/)) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
undef %selects;
}
print;
}
if (%selects) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
}
It found two duplicates:
Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry
and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.
We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-06 20:12:25 +04:00
|
|
|
select MXC_DEBUG_BOARD
|
2013-06-06 16:41:57 +04:00
|
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
ARM: config: sort select statements alphanumerically
As suggested by Andrew Morton:
This is a pet peeve of mine. Any time there's a long list of items
(header file inclusions, kconfig entries, array initalisers, etc) and
someone wants to add a new item, they *always* go and stick it at the
end of the list.
Guys, don't do this. Either put the new item into a randomly-chosen
position or, probably better, alphanumerically sort the list.
lets sort all our select statements alphanumerically. This commit was
created by the following perl:
while (<>) {
while (/\\\s*$/) {
$_ .= <>;
}
undef %selects if /^\s*config\s+/;
if (/^\s+select\s+(\w+).*/) {
if (defined($selects{$1})) {
if ($selects{$1} eq $_) {
print STDERR "Warning: removing duplicated $1 entry\n";
} else {
print STDERR "Error: $1 differently selected\n".
"\tOld: $selects{$1}\n".
"\tNew: $_\n";
exit 1;
}
}
$selects{$1} = $_;
next;
}
if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
/^endif/ or /^endchoice/)) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
undef %selects;
}
print;
}
if (%selects) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
}
It found two duplicates:
Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry
and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.
We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-06 20:12:25 +04:00
|
|
|
select SOC_IMX31
|
2011-03-17 11:40:29 +03:00
|
|
|
help
|
|
|
|
|
Include support for MX31PDK (3DS) platform. This includes specific
|
|
|
|
|
configurations for the board and its peripherals.
|
|
|
|
|
|
|
|
|
|
config MACH_MX31_3DS_MXC_NAND_USE_BBT
|
|
|
|
|
bool "Make the MXC NAND driver use the in flash Bad Block Table"
|
|
|
|
|
depends on MACH_MX31_3DS
|
|
|
|
|
depends on MTD_NAND_MXC
|
|
|
|
|
help
|
|
|
|
|
Enable this if you want that the MXC NAND driver uses the in flash
|
|
|
|
|
Bad Block Table to know what blocks are bad instead of scanning the
|
|
|
|
|
entire flash looking for bad block markers.
|
|
|
|
|
|
|
|
|
|
config MACH_MX31MOBOARD
|
|
|
|
|
bool "Support mx31moboard platforms (EPFL Mobots group)"
|
|
|
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
2012-01-20 21:58:23 +04:00
|
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
2011-03-17 11:40:29 +03:00
|
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
2012-05-15 15:53:52 +04:00
|
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
2011-03-17 11:40:29 +03:00
|
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
|
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
|
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
|
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
|
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
2011-05-28 23:05:01 +04:00
|
|
|
select LEDS_GPIO_REGISTER
|
2013-06-06 16:41:57 +04:00
|
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
ARM: config: sort select statements alphanumerically
As suggested by Andrew Morton:
This is a pet peeve of mine. Any time there's a long list of items
(header file inclusions, kconfig entries, array initalisers, etc) and
someone wants to add a new item, they *always* go and stick it at the
end of the list.
Guys, don't do this. Either put the new item into a randomly-chosen
position or, probably better, alphanumerically sort the list.
lets sort all our select statements alphanumerically. This commit was
created by the following perl:
while (<>) {
while (/\\\s*$/) {
$_ .= <>;
}
undef %selects if /^\s*config\s+/;
if (/^\s+select\s+(\w+).*/) {
if (defined($selects{$1})) {
if ($selects{$1} eq $_) {
print STDERR "Warning: removing duplicated $1 entry\n";
} else {
print STDERR "Error: $1 differently selected\n".
"\tOld: $selects{$1}\n".
"\tNew: $_\n";
exit 1;
}
}
$selects{$1} = $_;
next;
}
if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
/^endif/ or /^endchoice/)) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
undef %selects;
}
print;
}
if (%selects) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
}
It found two duplicates:
Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry
and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.
We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-06 20:12:25 +04:00
|
|
|
select SOC_IMX31
|
2011-03-17 11:40:29 +03:00
|
|
|
help
|
|
|
|
|
Include support for mx31moboard platform. This includes specific
|
|
|
|
|
configurations for the board and its peripherals.
|
|
|
|
|
|
|
|
|
|
config MACH_QONG
|
|
|
|
|
bool "Support Dave/DENX QongEVB-LITE platform"
|
2011-09-19 17:59:46 +04:00
|
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
ARM: config: sort select statements alphanumerically
As suggested by Andrew Morton:
This is a pet peeve of mine. Any time there's a long list of items
(header file inclusions, kconfig entries, array initalisers, etc) and
someone wants to add a new item, they *always* go and stick it at the
end of the list.
Guys, don't do this. Either put the new item into a randomly-chosen
position or, probably better, alphanumerically sort the list.
lets sort all our select statements alphanumerically. This commit was
created by the following perl:
while (<>) {
while (/\\\s*$/) {
$_ .= <>;
}
undef %selects if /^\s*config\s+/;
if (/^\s+select\s+(\w+).*/) {
if (defined($selects{$1})) {
if ($selects{$1} eq $_) {
print STDERR "Warning: removing duplicated $1 entry\n";
} else {
print STDERR "Error: $1 differently selected\n".
"\tOld: $selects{$1}\n".
"\tNew: $_\n";
exit 1;
}
}
$selects{$1} = $_;
next;
}
if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
/^endif/ or /^endchoice/)) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
undef %selects;
}
print;
}
if (%selects) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
}
It found two duplicates:
Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry
and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.
We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-06 20:12:25 +04:00
|
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
|
|
|
select SOC_IMX31
|
2011-03-17 11:40:29 +03:00
|
|
|
help
|
|
|
|
|
Include support for Dave/DENX QongEVB-LITE platform. This includes
|
|
|
|
|
specific configurations for the board and its peripherals.
|
|
|
|
|
|
|
|
|
|
config MACH_ARMADILLO5X0
|
|
|
|
|
bool "Support Atmark Armadillo-500 Development Base Board"
|
|
|
|
|
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
|
|
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
|
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
|
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
|
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
|
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
|
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
2013-06-06 16:41:57 +04:00
|
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
ARM: config: sort select statements alphanumerically
As suggested by Andrew Morton:
This is a pet peeve of mine. Any time there's a long list of items
(header file inclusions, kconfig entries, array initalisers, etc) and
someone wants to add a new item, they *always* go and stick it at the
end of the list.
Guys, don't do this. Either put the new item into a randomly-chosen
position or, probably better, alphanumerically sort the list.
lets sort all our select statements alphanumerically. This commit was
created by the following perl:
while (<>) {
while (/\\\s*$/) {
$_ .= <>;
}
undef %selects if /^\s*config\s+/;
if (/^\s+select\s+(\w+).*/) {
if (defined($selects{$1})) {
if ($selects{$1} eq $_) {
print STDERR "Warning: removing duplicated $1 entry\n";
} else {
print STDERR "Error: $1 differently selected\n".
"\tOld: $selects{$1}\n".
"\tNew: $_\n";
exit 1;
}
}
$selects{$1} = $_;
next;
}
if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
/^endif/ or /^endchoice/)) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
undef %selects;
}
print;
}
if (%selects) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
}
It found two duplicates:
Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry
and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.
We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-06 20:12:25 +04:00
|
|
|
select SOC_IMX31
|
2011-03-17 11:40:29 +03:00
|
|
|
help
|
|
|
|
|
Include support for Atmark Armadillo-500 platform. This includes
|
|
|
|
|
specific configurations for the board and its peripherals.
|
|
|
|
|
|
|
|
|
|
config MACH_KZM_ARM11_01
|
|
|
|
|
bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
|
|
|
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
ARM: config: sort select statements alphanumerically
As suggested by Andrew Morton:
This is a pet peeve of mine. Any time there's a long list of items
(header file inclusions, kconfig entries, array initalisers, etc) and
someone wants to add a new item, they *always* go and stick it at the
end of the list.
Guys, don't do this. Either put the new item into a randomly-chosen
position or, probably better, alphanumerically sort the list.
lets sort all our select statements alphanumerically. This commit was
created by the following perl:
while (<>) {
while (/\\\s*$/) {
$_ .= <>;
}
undef %selects if /^\s*config\s+/;
if (/^\s+select\s+(\w+).*/) {
if (defined($selects{$1})) {
if ($selects{$1} eq $_) {
print STDERR "Warning: removing duplicated $1 entry\n";
} else {
print STDERR "Error: $1 differently selected\n".
"\tOld: $selects{$1}\n".
"\tNew: $_\n";
exit 1;
}
}
$selects{$1} = $_;
next;
}
if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
/^endif/ or /^endchoice/)) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
undef %selects;
}
print;
}
if (%selects) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
}
It found two duplicates:
Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry
and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.
We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-06 20:12:25 +04:00
|
|
|
select SOC_IMX31
|
2011-03-17 11:40:29 +03:00
|
|
|
help
|
|
|
|
|
Include support for KZM-ARM11-01. This includes specific
|
|
|
|
|
configurations for the board and its peripherals.
|
|
|
|
|
|
|
|
|
|
config MACH_BUG
|
|
|
|
|
bool "Support Buglabs BUGBase platform"
|
|
|
|
|
default y
|
ARM: config: sort select statements alphanumerically
As suggested by Andrew Morton:
This is a pet peeve of mine. Any time there's a long list of items
(header file inclusions, kconfig entries, array initalisers, etc) and
someone wants to add a new item, they *always* go and stick it at the
end of the list.
Guys, don't do this. Either put the new item into a randomly-chosen
position or, probably better, alphanumerically sort the list.
lets sort all our select statements alphanumerically. This commit was
created by the following perl:
while (<>) {
while (/\\\s*$/) {
$_ .= <>;
}
undef %selects if /^\s*config\s+/;
if (/^\s+select\s+(\w+).*/) {
if (defined($selects{$1})) {
if ($selects{$1} eq $_) {
print STDERR "Warning: removing duplicated $1 entry\n";
} else {
print STDERR "Error: $1 differently selected\n".
"\tOld: $selects{$1}\n".
"\tNew: $_\n";
exit 1;
}
}
$selects{$1} = $_;
next;
}
if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
/^endif/ or /^endchoice/)) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
undef %selects;
}
print;
}
if (%selects) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
}
It found two duplicates:
Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry
and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.
We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-06 20:12:25 +04:00
|
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
|
|
|
select SOC_IMX31
|
2011-03-17 11:40:29 +03:00
|
|
|
help
|
|
|
|
|
Include support for BUGBase 1.3 platform. This includes specific
|
|
|
|
|
configurations for the board and its peripherals.
|
|
|
|
|
|
2012-07-09 23:39:12 +04:00
|
|
|
config MACH_IMX31_DT
|
|
|
|
|
bool "Support i.MX31 platforms from device tree"
|
|
|
|
|
select SOC_IMX31
|
|
|
|
|
help
|
|
|
|
|
Include support for Freescale i.MX31 based platforms
|
|
|
|
|
using the device tree for discovery.
|
|
|
|
|
|
2011-03-17 11:40:29 +03:00
|
|
|
comment "MX35 platforms:"
|
|
|
|
|
|
2013-12-18 18:10:25 +04:00
|
|
|
config MACH_IMX35_DT
|
|
|
|
|
bool "Support i.MX35 platforms from device tree"
|
|
|
|
|
select SOC_IMX35
|
|
|
|
|
help
|
|
|
|
|
Include support for Freescale i.MX35 based platforms
|
|
|
|
|
using the device tree for discovery.
|
|
|
|
|
|
2011-03-17 11:40:29 +03:00
|
|
|
config MACH_PCM043
|
|
|
|
|
bool "Support Phytec pcm043 (i.MX35) platforms"
|
|
|
|
|
select IMX_HAVE_PLATFORM_FLEXCAN
|
|
|
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
|
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
|
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
|
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
|
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
|
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
|
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
|
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
|
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
2013-06-06 16:41:57 +04:00
|
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
ARM: config: sort select statements alphanumerically
As suggested by Andrew Morton:
This is a pet peeve of mine. Any time there's a long list of items
(header file inclusions, kconfig entries, array initalisers, etc) and
someone wants to add a new item, they *always* go and stick it at the
end of the list.
Guys, don't do this. Either put the new item into a randomly-chosen
position or, probably better, alphanumerically sort the list.
lets sort all our select statements alphanumerically. This commit was
created by the following perl:
while (<>) {
while (/\\\s*$/) {
$_ .= <>;
}
undef %selects if /^\s*config\s+/;
if (/^\s+select\s+(\w+).*/) {
if (defined($selects{$1})) {
if ($selects{$1} eq $_) {
print STDERR "Warning: removing duplicated $1 entry\n";
} else {
print STDERR "Error: $1 differently selected\n".
"\tOld: $selects{$1}\n".
"\tNew: $_\n";
exit 1;
}
}
$selects{$1} = $_;
next;
}
if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
/^endif/ or /^endchoice/)) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
undef %selects;
}
print;
}
if (%selects) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
}
It found two duplicates:
Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry
and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.
We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-06 20:12:25 +04:00
|
|
|
select SOC_IMX35
|
2011-03-17 11:40:29 +03:00
|
|
|
help
|
|
|
|
|
Include support for Phytec pcm043 platform. This includes
|
|
|
|
|
specific configurations for the board and its peripherals.
|
|
|
|
|
|
|
|
|
|
config MACH_MX35_3DS
|
|
|
|
|
bool "Support MX35PDK platform"
|
|
|
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
|
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
2012-04-24 19:48:18 +04:00
|
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
2011-03-17 11:40:29 +03:00
|
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
|
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
2012-04-24 19:48:18 +04:00
|
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
2011-03-17 11:40:29 +03:00
|
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
|
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
2012-07-04 18:36:28 +04:00
|
|
|
select IMX_HAVE_PLATFORM_MXC_RTC
|
2011-03-17 11:40:29 +03:00
|
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
ARM: config: sort select statements alphanumerically
As suggested by Andrew Morton:
This is a pet peeve of mine. Any time there's a long list of items
(header file inclusions, kconfig entries, array initalisers, etc) and
someone wants to add a new item, they *always* go and stick it at the
end of the list.
Guys, don't do this. Either put the new item into a randomly-chosen
position or, probably better, alphanumerically sort the list.
lets sort all our select statements alphanumerically. This commit was
created by the following perl:
while (<>) {
while (/\\\s*$/) {
$_ .= <>;
}
undef %selects if /^\s*config\s+/;
if (/^\s+select\s+(\w+).*/) {
if (defined($selects{$1})) {
if ($selects{$1} eq $_) {
print STDERR "Warning: removing duplicated $1 entry\n";
} else {
print STDERR "Error: $1 differently selected\n".
"\tOld: $selects{$1}\n".
"\tNew: $_\n";
exit 1;
}
}
$selects{$1} = $_;
next;
}
if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
/^endif/ or /^endchoice/)) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
undef %selects;
}
print;
}
if (%selects) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
}
It found two duplicates:
Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry
and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.
We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-06 20:12:25 +04:00
|
|
|
select MXC_DEBUG_BOARD
|
|
|
|
|
select SOC_IMX35
|
2011-03-17 11:40:29 +03:00
|
|
|
help
|
|
|
|
|
Include support for MX35PDK platform. This includes specific
|
|
|
|
|
configurations for the board and its peripherals.
|
|
|
|
|
|
|
|
|
|
config MACH_VPR200
|
|
|
|
|
bool "Support VPR200 platform"
|
|
|
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
|
|
|
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
|
|
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
|
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
ARM: config: sort select statements alphanumerically
As suggested by Andrew Morton:
This is a pet peeve of mine. Any time there's a long list of items
(header file inclusions, kconfig entries, array initalisers, etc) and
someone wants to add a new item, they *always* go and stick it at the
end of the list.
Guys, don't do this. Either put the new item into a randomly-chosen
position or, probably better, alphanumerically sort the list.
lets sort all our select statements alphanumerically. This commit was
created by the following perl:
while (<>) {
while (/\\\s*$/) {
$_ .= <>;
}
undef %selects if /^\s*config\s+/;
if (/^\s+select\s+(\w+).*/) {
if (defined($selects{$1})) {
if ($selects{$1} eq $_) {
print STDERR "Warning: removing duplicated $1 entry\n";
} else {
print STDERR "Error: $1 differently selected\n".
"\tOld: $selects{$1}\n".
"\tNew: $_\n";
exit 1;
}
}
$selects{$1} = $_;
next;
}
if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
/^endif/ or /^endchoice/)) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
undef %selects;
}
print;
}
if (%selects) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
}
It found two duplicates:
Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry
and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.
We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-06 20:12:25 +04:00
|
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
2011-03-17 11:40:29 +03:00
|
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
|
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
|
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
|
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
ARM: config: sort select statements alphanumerically
As suggested by Andrew Morton:
This is a pet peeve of mine. Any time there's a long list of items
(header file inclusions, kconfig entries, array initalisers, etc) and
someone wants to add a new item, they *always* go and stick it at the
end of the list.
Guys, don't do this. Either put the new item into a randomly-chosen
position or, probably better, alphanumerically sort the list.
lets sort all our select statements alphanumerically. This commit was
created by the following perl:
while (<>) {
while (/\\\s*$/) {
$_ .= <>;
}
undef %selects if /^\s*config\s+/;
if (/^\s+select\s+(\w+).*/) {
if (defined($selects{$1})) {
if ($selects{$1} eq $_) {
print STDERR "Warning: removing duplicated $1 entry\n";
} else {
print STDERR "Error: $1 differently selected\n".
"\tOld: $selects{$1}\n".
"\tNew: $_\n";
exit 1;
}
}
$selects{$1} = $_;
next;
}
if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
/^endif/ or /^endchoice/)) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
undef %selects;
}
print;
}
if (%selects) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
}
It found two duplicates:
Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry
and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.
We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-06 20:12:25 +04:00
|
|
|
select SOC_IMX35
|
2011-03-17 11:40:29 +03:00
|
|
|
help
|
|
|
|
|
Include support for VPR200 platform. This includes specific
|
|
|
|
|
configurations for the board and its peripherals.
|
|
|
|
|
|
2012-09-17 05:38:39 +04:00
|
|
|
endif
|
|
|
|
|
|
2015-03-11 04:40:03 +03:00
|
|
|
comment "Device tree only"
|
|
|
|
|
|
2016-08-06 07:56:26 +03:00
|
|
|
if ARCH_MULTI_V4T
|
|
|
|
|
|
|
|
|
|
config SOC_IMX1
|
|
|
|
|
bool "i.MX1 support"
|
|
|
|
|
select CPU_ARM920T
|
|
|
|
|
select MXC_AVIC
|
|
|
|
|
select PINCTRL_IMX1
|
|
|
|
|
help
|
|
|
|
|
This enables support for Freescale i.MX1 processor
|
|
|
|
|
|
|
|
|
|
endif
|
|
|
|
|
|
2015-05-20 01:03:52 +03:00
|
|
|
if ARCH_MULTI_V5
|
|
|
|
|
|
2015-03-11 04:40:03 +03:00
|
|
|
config SOC_IMX25
|
|
|
|
|
bool "i.MX25 support"
|
|
|
|
|
select ARCH_MXC_IOMUX_V3
|
|
|
|
|
select CPU_ARM926T
|
|
|
|
|
select MXC_AVIC
|
|
|
|
|
select PINCTRL_IMX25
|
|
|
|
|
help
|
|
|
|
|
This enables support for Freescale i.MX25 processor
|
|
|
|
|
endif
|
|
|
|
|
|
2012-09-17 05:38:39 +04:00
|
|
|
if ARCH_MULTI_V7
|
|
|
|
|
|
2015-05-20 01:03:52 +03:00
|
|
|
comment "Cortex-A platforms"
|
2011-11-07 15:36:48 +04:00
|
|
|
|
2014-05-19 09:37:50 +04:00
|
|
|
config SOC_IMX5
|
|
|
|
|
bool
|
|
|
|
|
select HAVE_IMX_SRC
|
|
|
|
|
select MXC_TZIC
|
|
|
|
|
|
2013-10-29 09:15:54 +04:00
|
|
|
config SOC_IMX50
|
|
|
|
|
bool "i.MX50 support"
|
2013-11-16 18:25:02 +04:00
|
|
|
select PINCTRL_IMX50
|
2013-10-29 09:15:54 +04:00
|
|
|
select SOC_IMX5
|
|
|
|
|
|
|
|
|
|
help
|
|
|
|
|
This enables support for Freescale i.MX50 processor.
|
|
|
|
|
|
2014-05-19 09:47:43 +04:00
|
|
|
config SOC_IMX51
|
2014-05-10 19:47:36 +04:00
|
|
|
bool "i.MX51 support"
|
2014-05-19 09:47:43 +04:00
|
|
|
select PINCTRL_IMX51
|
|
|
|
|
select SOC_IMX5
|
2014-05-10 19:47:36 +04:00
|
|
|
help
|
|
|
|
|
This enables support for Freescale i.MX51 processor
|
|
|
|
|
|
2012-08-12 19:21:39 +04:00
|
|
|
config SOC_IMX53
|
|
|
|
|
bool "i.MX53 support"
|
|
|
|
|
select PINCTRL_IMX53
|
ARM: config: sort select statements alphanumerically
As suggested by Andrew Morton:
This is a pet peeve of mine. Any time there's a long list of items
(header file inclusions, kconfig entries, array initalisers, etc) and
someone wants to add a new item, they *always* go and stick it at the
end of the list.
Guys, don't do this. Either put the new item into a randomly-chosen
position or, probably better, alphanumerically sort the list.
lets sort all our select statements alphanumerically. This commit was
created by the following perl:
while (<>) {
while (/\\\s*$/) {
$_ .= <>;
}
undef %selects if /^\s*config\s+/;
if (/^\s+select\s+(\w+).*/) {
if (defined($selects{$1})) {
if ($selects{$1} eq $_) {
print STDERR "Warning: removing duplicated $1 entry\n";
} else {
print STDERR "Error: $1 differently selected\n".
"\tOld: $selects{$1}\n".
"\tNew: $_\n";
exit 1;
}
}
$selects{$1} = $_;
next;
}
if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
/^endif/ or /^endchoice/)) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
undef %selects;
}
print;
}
if (%selects) {
foreach $k (sort (keys %selects)) {
print "$selects{$k}";
}
}
It found two duplicates:
Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry
and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.
We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)
Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-06 20:12:25 +04:00
|
|
|
select SOC_IMX5
|
2011-11-07 15:36:48 +04:00
|
|
|
|
|
|
|
|
help
|
2012-08-12 19:21:39 +04:00
|
|
|
This enables support for Freescale i.MX53 processor.
|
2011-10-02 11:09:11 +04:00
|
|
|
|
2014-02-27 11:22:49 +04:00
|
|
|
config SOC_IMX6
|
|
|
|
|
bool
|
2018-02-06 01:06:43 +03:00
|
|
|
select ARM_CPU_SUSPEND if (PM || CPU_IDLE)
|
2012-10-23 15:44:34 +04:00
|
|
|
select ARM_ERRATA_754322
|
|
|
|
|
select ARM_ERRATA_775420
|
2011-10-02 11:09:11 +04:00
|
|
|
select ARM_GIC
|
2013-03-21 03:39:42 +04:00
|
|
|
select HAVE_IMX_ANATOP
|
2011-09-06 10:39:44 +04:00
|
|
|
select HAVE_IMX_GPC
|
|
|
|
|
select HAVE_IMX_MMDC
|
2013-01-11 18:08:27 +04:00
|
|
|
select HAVE_IMX_SRC
|
2012-09-05 06:57:15 +04:00
|
|
|
select MFD_SYSCON
|
2014-06-19 13:19:10 +04:00
|
|
|
select PL310_ERRATA_769419 if CACHE_L2X0
|
2011-10-02 11:09:11 +04:00
|
|
|
|
2014-02-27 11:22:49 +04:00
|
|
|
config SOC_IMX6Q
|
|
|
|
|
bool "i.MX6 Quad/DualLite support"
|
|
|
|
|
select ARM_ERRATA_764369 if SMP
|
|
|
|
|
select HAVE_ARM_SCU if SMP
|
2016-04-06 18:39:07 +03:00
|
|
|
select HAVE_ARM_TWD
|
2014-02-27 11:22:49 +04:00
|
|
|
select PINCTRL_IMX6Q
|
|
|
|
|
select SOC_IMX6
|
|
|
|
|
|
2011-10-02 11:09:11 +04:00
|
|
|
help
|
|
|
|
|
This enables support for Freescale i.MX6 Quad processor.
|
|
|
|
|
|
2013-05-03 07:24:47 +04:00
|
|
|
config SOC_IMX6SL
|
|
|
|
|
bool "i.MX6 SoloLite support"
|
|
|
|
|
select PINCTRL_IMX6SL
|
2014-02-27 11:22:49 +04:00
|
|
|
select SOC_IMX6
|
2013-05-03 07:24:47 +04:00
|
|
|
|
|
|
|
|
help
|
|
|
|
|
This enables support for Freescale i.MX6 SoloLite processor.
|
|
|
|
|
|
2018-03-08 12:34:55 +03:00
|
|
|
config SOC_IMX6SLL
|
|
|
|
|
bool "i.MX6 SoloLiteLite support"
|
2018-04-13 11:04:23 +03:00
|
|
|
select PINCTRL_IMX6SLL
|
2018-03-08 12:34:55 +03:00
|
|
|
select SOC_IMX6
|
|
|
|
|
|
|
|
|
|
help
|
|
|
|
|
This enables support for Freescale i.MX6 SoloLiteLite processor.
|
|
|
|
|
|
2014-05-13 17:46:16 +04:00
|
|
|
config SOC_IMX6SX
|
|
|
|
|
bool "i.MX6 SoloX support"
|
|
|
|
|
select PINCTRL_IMX6SX
|
|
|
|
|
select SOC_IMX6
|
|
|
|
|
|
|
|
|
|
help
|
|
|
|
|
This enables support for Freescale i.MX6 SoloX processor.
|
|
|
|
|
|
2015-07-09 21:09:41 +03:00
|
|
|
config SOC_IMX6UL
|
|
|
|
|
bool "i.MX6 UltraLite support"
|
|
|
|
|
select PINCTRL_IMX6UL
|
|
|
|
|
select SOC_IMX6
|
|
|
|
|
|
|
|
|
|
help
|
|
|
|
|
This enables support for Freescale i.MX6 UltraLite processor.
|
|
|
|
|
|
2015-05-20 01:03:52 +03:00
|
|
|
config SOC_LS1021A
|
|
|
|
|
bool "Freescale LS1021A support"
|
|
|
|
|
select ARM_GIC
|
|
|
|
|
select HAVE_ARM_ARCH_TIMER
|
|
|
|
|
select ZONE_DMA if ARM_LPAE
|
|
|
|
|
help
|
|
|
|
|
This enables support for Freescale LS1021A processor.
|
|
|
|
|
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms"
|
|
|
|
|
|
|
|
|
|
if ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M
|
|
|
|
|
|
2018-07-03 10:12:47 +03:00
|
|
|
config SOC_IMX7D_CA7
|
|
|
|
|
bool
|
|
|
|
|
select ARM_GIC
|
|
|
|
|
select HAVE_ARM_ARCH_TIMER
|
|
|
|
|
select HAVE_IMX_ANATOP
|
|
|
|
|
select HAVE_IMX_MMDC
|
|
|
|
|
select HAVE_IMX_SRC
|
|
|
|
|
select IMX_GPCV2
|
|
|
|
|
|
|
|
|
|
config SOC_IMX7D_CM4
|
|
|
|
|
bool
|
|
|
|
|
select ARMV7M_SYSTICK
|
|
|
|
|
|
|
|
|
|
config SOC_IMX7D
|
|
|
|
|
bool "i.MX7 Dual support"
|
|
|
|
|
select PINCTRL_IMX7D
|
|
|
|
|
select SOC_IMX7D_CA7 if ARCH_MULTI_V7
|
|
|
|
|
select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M
|
|
|
|
|
help
|
|
|
|
|
This enables support for Freescale i.MX7 Dual processor.
|
|
|
|
|
|
2013-05-28 13:12:21 +04:00
|
|
|
config SOC_VF610
|
|
|
|
|
bool "Vybrid Family VF610 support"
|
2015-05-20 01:03:52 +03:00
|
|
|
select ARM_GIC if ARCH_MULTI_V7
|
2013-05-28 13:12:21 +04:00
|
|
|
select PINCTRL_VF610
|
|
|
|
|
|
|
|
|
|
help
|
2015-02-28 18:47:46 +03:00
|
|
|
This enables support for Freescale Vybrid VF610 processor.
|
2013-05-28 13:12:21 +04:00
|
|
|
|
2014-09-24 20:20:10 +04:00
|
|
|
choice
|
|
|
|
|
prompt "Clocksource for scheduler clock"
|
|
|
|
|
depends on SOC_VF610
|
|
|
|
|
default VF_USE_ARM_GLOBAL_TIMER
|
|
|
|
|
|
|
|
|
|
config VF_USE_ARM_GLOBAL_TIMER
|
ARM: use "depends on" for SoC configs instead of "if" after prompt
Many ARM sub-architectures use prompts followed by "if" conditional,
but it is wrong.
Please notice the difference between
config ARCH_FOO
bool "Foo SoCs" if ARCH_MULTI_V7
and
config ARCH_FOO
bool "Foo SoCs"
depends on ARCH_MULTI_V7
These two are *not* equivalent!
In the former statement, it is not ARCH_FOO, but its prompt that
depends on ARCH_MULTI_V7. So, it is completely valid that ARCH_FOO
is selected by another, but ARCH_MULTI_V7 is still disabled. As it is
not unmet dependency, Kconfig never warns. This is probably not what
you want.
The former should be used only when you need to do so, and you really
understand what you are doing. (In most cases, it should be wrong!)
For enabling/disabling sub-architectures, the latter is always correct.
As a good side effect, this commit fixes some entries over 80 columns
(mach-imx, mach-integrator, mach-mbevu).
[Arnd: I note that there is not really a bug here, according to
the discussion that followed, but I can see value in being consistent
and in making the lines shorter]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Krzysztof Halasa <khc@piap.pl>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-11-16 06:06:10 +03:00
|
|
|
bool "Use ARM Global Timer"
|
|
|
|
|
depends on ARCH_MULTI_V7
|
2014-09-24 20:20:10 +04:00
|
|
|
select ARM_GLOBAL_TIMER
|
|
|
|
|
select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
|
|
|
|
|
help
|
|
|
|
|
Use the ARM Global Timer as clocksource
|
|
|
|
|
|
|
|
|
|
config VF_USE_PIT_TIMER
|
|
|
|
|
bool "Use PIT timer"
|
|
|
|
|
select VF_PIT_TIMER
|
|
|
|
|
help
|
|
|
|
|
Use SoC Periodic Interrupt Timer (PIT) as clocksource
|
|
|
|
|
|
|
|
|
|
endchoice
|
|
|
|
|
|
2011-03-17 11:40:29 +03:00
|
|
|
endif
|
2012-09-13 11:51:15 +04:00
|
|
|
|
|
|
|
|
source "arch/arm/mach-imx/devices/Kconfig"
|
2012-09-13 15:48:07 +04:00
|
|
|
|
2014-06-10 18:06:10 +04:00
|
|
|
endif
|
