2007-10-01 23:20:56 +04:00
|
|
|
/*
|
|
|
|
* Bitbanged MDIO support.
|
|
|
|
*
|
|
|
|
* Author: Scott Wood <scottwood@freescale.com>
|
|
|
|
* Copyright (c) 2007 Freescale Semiconductor
|
|
|
|
*
|
|
|
|
* Based on CPM2 MDIO code which is:
|
|
|
|
*
|
|
|
|
* Copyright (c) 2003 Intracom S.A.
|
|
|
|
* by Pantelis Antoniou <panto@intracom.gr>
|
|
|
|
*
|
|
|
|
* 2005 (c) MontaVista Software, Inc.
|
|
|
|
* Vitaly Bordug <vbordug@ru.mvista.com>
|
|
|
|
*
|
|
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
|
|
* kind, whether express or implied.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/mdio-bitbang.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
|
|
|
|
#define MDIO_READ 1
|
|
|
|
#define MDIO_WRITE 0
|
|
|
|
|
|
|
|
#define MDIO_SETUP_TIME 10
|
|
|
|
#define MDIO_HOLD_TIME 10
|
|
|
|
|
|
|
|
/* Minimum MDC period is 400 ns, plus some margin for error. MDIO_DELAY
|
|
|
|
* is done twice per period.
|
|
|
|
*/
|
|
|
|
#define MDIO_DELAY 250
|
|
|
|
|
|
|
|
/* The PHY may take up to 300 ns to produce data, plus some margin
|
|
|
|
* for error.
|
|
|
|
*/
|
|
|
|
#define MDIO_READ_DELAY 350
|
|
|
|
|
|
|
|
/* MDIO must already be configured as output. */
|
|
|
|
static void mdiobb_send_bit(struct mdiobb_ctrl *ctrl, int val)
|
|
|
|
{
|
|
|
|
const struct mdiobb_ops *ops = ctrl->ops;
|
|
|
|
|
|
|
|
ops->set_mdio_data(ctrl, val);
|
|
|
|
ndelay(MDIO_DELAY);
|
|
|
|
ops->set_mdc(ctrl, 1);
|
|
|
|
ndelay(MDIO_DELAY);
|
|
|
|
ops->set_mdc(ctrl, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* MDIO must already be configured as input. */
|
|
|
|
static int mdiobb_get_bit(struct mdiobb_ctrl *ctrl)
|
|
|
|
{
|
|
|
|
const struct mdiobb_ops *ops = ctrl->ops;
|
|
|
|
|
|
|
|
ndelay(MDIO_DELAY);
|
|
|
|
ops->set_mdc(ctrl, 1);
|
|
|
|
ndelay(MDIO_READ_DELAY);
|
|
|
|
ops->set_mdc(ctrl, 0);
|
|
|
|
|
|
|
|
return ops->get_mdio_data(ctrl);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* MDIO must already be configured as output. */
|
|
|
|
static void mdiobb_send_num(struct mdiobb_ctrl *ctrl, u16 val, int bits)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = bits - 1; i >= 0; i--)
|
|
|
|
mdiobb_send_bit(ctrl, (val >> i) & 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* MDIO must already be configured as input. */
|
|
|
|
static u16 mdiobb_get_num(struct mdiobb_ctrl *ctrl, int bits)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
u16 ret = 0;
|
|
|
|
|
|
|
|
for (i = bits - 1; i >= 0; i--) {
|
|
|
|
ret <<= 1;
|
|
|
|
ret |= mdiobb_get_bit(ctrl);
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Utility to send the preamble, address, and
|
|
|
|
* register (common to read and write).
|
|
|
|
*/
|
|
|
|
static void mdiobb_cmd(struct mdiobb_ctrl *ctrl, int read, u8 phy, u8 reg)
|
|
|
|
{
|
|
|
|
const struct mdiobb_ops *ops = ctrl->ops;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
ops->set_mdio_dir(ctrl, 1);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Send a 32 bit preamble ('1's) with an extra '1' bit for good
|
|
|
|
* measure. The IEEE spec says this is a PHY optional
|
|
|
|
* requirement. The AMD 79C874 requires one after power up and
|
|
|
|
* one after a MII communications error. This means that we are
|
|
|
|
* doing more preambles than we need, but it is safer and will be
|
|
|
|
* much more robust.
|
|
|
|
*/
|
|
|
|
|
|
|
|
for (i = 0; i < 32; i++)
|
|
|
|
mdiobb_send_bit(ctrl, 1);
|
|
|
|
|
|
|
|
/* send the start bit (01) and the read opcode (10) or write (10) */
|
|
|
|
mdiobb_send_bit(ctrl, 0);
|
|
|
|
mdiobb_send_bit(ctrl, 1);
|
|
|
|
mdiobb_send_bit(ctrl, read);
|
|
|
|
mdiobb_send_bit(ctrl, !read);
|
|
|
|
|
|
|
|
mdiobb_send_num(ctrl, phy, 5);
|
|
|
|
mdiobb_send_num(ctrl, reg, 5);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static int mdiobb_read(struct mii_bus *bus, int phy, int reg)
|
|
|
|
{
|
|
|
|
struct mdiobb_ctrl *ctrl = bus->priv;
|
|
|
|
int ret, i;
|
|
|
|
|
|
|
|
mdiobb_cmd(ctrl, MDIO_READ, phy, reg);
|
|
|
|
ctrl->ops->set_mdio_dir(ctrl, 0);
|
|
|
|
|
|
|
|
/* check the turnaround bit: the PHY should be driving it to zero */
|
|
|
|
if (mdiobb_get_bit(ctrl) != 0) {
|
|
|
|
/* PHY didn't drive TA low -- flush any bits it
|
|
|
|
* may be trying to send.
|
|
|
|
*/
|
|
|
|
for (i = 0; i < 32; i++)
|
|
|
|
mdiobb_get_bit(ctrl);
|
|
|
|
|
|
|
|
return 0xffff;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = mdiobb_get_num(ctrl, 16);
|
|
|
|
mdiobb_get_bit(ctrl);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val)
|
|
|
|
{
|
|
|
|
struct mdiobb_ctrl *ctrl = bus->priv;
|
|
|
|
|
|
|
|
mdiobb_cmd(ctrl, MDIO_WRITE, phy, reg);
|
|
|
|
|
|
|
|
/* send the turnaround (10) */
|
|
|
|
mdiobb_send_bit(ctrl, 1);
|
|
|
|
mdiobb_send_bit(ctrl, 0);
|
|
|
|
|
|
|
|
mdiobb_send_num(ctrl, val, 16);
|
|
|
|
|
|
|
|
ctrl->ops->set_mdio_dir(ctrl, 0);
|
|
|
|
mdiobb_get_bit(ctrl);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
struct mii_bus *alloc_mdio_bitbang(struct mdiobb_ctrl *ctrl)
|
|
|
|
{
|
|
|
|
struct mii_bus *bus;
|
|
|
|
|
2008-10-09 03:29:57 +04:00
|
|
|
bus = mdiobus_alloc();
|
2007-10-01 23:20:56 +04:00
|
|
|
if (!bus)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
__module_get(ctrl->ops->owner);
|
|
|
|
|
|
|
|
bus->read = mdiobb_read;
|
|
|
|
bus->write = mdiobb_write;
|
|
|
|
bus->priv = ctrl;
|
|
|
|
|
|
|
|
return bus;
|
|
|
|
}
|
2008-07-07 18:51:45 +04:00
|
|
|
EXPORT_SYMBOL(alloc_mdio_bitbang);
|
2007-10-01 23:20:56 +04:00
|
|
|
|
|
|
|
void free_mdio_bitbang(struct mii_bus *bus)
|
|
|
|
{
|
|
|
|
struct mdiobb_ctrl *ctrl = bus->priv;
|
|
|
|
|
|
|
|
module_put(ctrl->ops->owner);
|
2008-10-09 03:29:57 +04:00
|
|
|
mdiobus_free(bus);
|
2007-10-01 23:20:56 +04:00
|
|
|
}
|
2008-07-07 18:51:45 +04:00
|
|
|
EXPORT_SYMBOL(free_mdio_bitbang);
|
2007-10-18 23:20:21 +04:00
|
|
|
|
|
|
|
MODULE_LICENSE("GPL");
|