WSL2-Linux-Kernel/include/target/target_core_base.h

907 строки
26 KiB
C
Исходник Обычный вид История

#ifndef TARGET_CORE_BASE_H
#define TARGET_CORE_BASE_H
#include <linux/in.h>
#include <linux/configfs.h>
#include <linux/dma-mapping.h>
#include <linux/blkdev.h>
#include <linux/percpu_ida.h>
#include <scsi/scsi_cmnd.h>
#include <net/sock.h>
#include <net/tcp.h>
#define TARGET_CORE_MOD_VERSION "v4.1.0"
#define TARGET_CORE_VERSION TARGET_CORE_MOD_VERSION
/* Maximum Number of LUNs per Target Portal Group */
/* Don't raise above 511 or REPORT_LUNS needs to handle >1 page */
#define TRANSPORT_MAX_LUNS_PER_TPG 256
/*
* By default we use 32-byte CDBs in TCM Core and subsystem plugin code.
*
* Note that both include/scsi/scsi_cmnd.h:MAX_COMMAND_SIZE and
* include/linux/blkdev.h:BLOCK_MAX_CDB as of v2.6.36-rc4 still use
* 16-byte CDBs by default and require an extra allocation for
* 32-byte CDBs to because of legacy issues.
*
* Within TCM Core there are no such legacy limitiations, so we go ahead
* use 32-byte CDBs by default and use include/scsi/scsi.h:scsi_command_size()
* within all TCM Core and subsystem plugin code.
*/
#define TCM_MAX_COMMAND_SIZE 32
/*
* From include/scsi/scsi_cmnd.h:SCSI_SENSE_BUFFERSIZE, currently
* defined 96, but the real limit is 252 (or 260 including the header)
*/
#define TRANSPORT_SENSE_BUFFER SCSI_SENSE_BUFFERSIZE
/* Used by transport_send_check_condition_and_sense() */
#define SPC_SENSE_KEY_OFFSET 2
#define SPC_ADD_SENSE_LEN_OFFSET 7
#define SPC_DESC_TYPE_OFFSET 8
#define SPC_ADDITIONAL_DESC_LEN_OFFSET 9
#define SPC_VALIDITY_OFFSET 10
#define SPC_ASC_KEY_OFFSET 12
#define SPC_ASCQ_KEY_OFFSET 13
#define TRANSPORT_IQN_LEN 224
/* Used by target_core_store_alua_lu_gp() and target_core_alua_lu_gp_show_attr_members() */
#define LU_GROUP_NAME_BUF 256
/* Used by core_alua_store_tg_pt_gp_info() and target_core_alua_tg_pt_gp_show_attr_members() */
#define TG_PT_GROUP_NAME_BUF 256
/* Used to parse VPD into struct t10_vpd */
#define VPD_TMP_BUF_SIZE 254
/* Used by transport_generic_cmd_sequencer() */
#define READ_BLOCK_LEN 6
#define READ_CAP_LEN 8
#define READ_POSITION_LEN 20
#define INQUIRY_LEN 36
/* Used by transport_get_inquiry_vpd_serial() */
#define INQUIRY_VPD_SERIAL_LEN 254
/* Used by transport_get_inquiry_vpd_device_ident() */
#define INQUIRY_VPD_DEVICE_IDENTIFIER_LEN 254
/* Attempts before moving from SHORT to LONG */
#define PYX_TRANSPORT_WINDOW_CLOSED_THRESHOLD 3
#define PYX_TRANSPORT_WINDOW_CLOSED_WAIT_SHORT 3 /* In milliseconds */
#define PYX_TRANSPORT_WINDOW_CLOSED_WAIT_LONG 10 /* In milliseconds */
#define PYX_TRANSPORT_STATUS_INTERVAL 5 /* In seconds */
/* struct se_dev_attrib sanity values */
/* Default max_unmap_lba_count */
#define DA_MAX_UNMAP_LBA_COUNT 0
/* Default max_unmap_block_desc_count */
#define DA_MAX_UNMAP_BLOCK_DESC_COUNT 0
/* Default unmap_granularity */
#define DA_UNMAP_GRANULARITY_DEFAULT 0
/* Default unmap_granularity_alignment */
#define DA_UNMAP_GRANULARITY_ALIGNMENT_DEFAULT 0
/* Default max_write_same_len, disabled by default */
#define DA_MAX_WRITE_SAME_LEN 0
/* Default max transfer length */
#define DA_FABRIC_MAX_SECTORS 8192
/* Use a model alias based on the configfs backend device name */
#define DA_EMULATE_MODEL_ALIAS 0
/* Emulation for Direct Page Out */
#define DA_EMULATE_DPO 0
/* Emulation for Forced Unit Access WRITEs */
#define DA_EMULATE_FUA_WRITE 1
/* Emulation for Forced Unit Access READs */
#define DA_EMULATE_FUA_READ 0
/* Emulation for WriteCache and SYNCHRONIZE_CACHE */
#define DA_EMULATE_WRITE_CACHE 0
/* Emulation for UNIT ATTENTION Interlock Control */
#define DA_EMULATE_UA_INTLLCK_CTRL 0
/* Emulation for TASK_ABORTED status (TAS) by default */
#define DA_EMULATE_TAS 1
/* Emulation for Thin Provisioning UNMAP using block/blk-lib.c:blkdev_issue_discard() */
#define DA_EMULATE_TPU 0
/*
* Emulation for Thin Provisioning WRITE_SAME w/ UNMAP=1 bit using
* block/blk-lib.c:blkdev_issue_discard()
*/
#define DA_EMULATE_TPWS 0
/* Emulation for CompareAndWrite (AtomicTestandSet) by default */
#define DA_EMULATE_CAW 1
/* Emulation for 3rd Party Copy (ExtendedCopy) by default */
#define DA_EMULATE_3PC 1
/* No Emulation for PSCSI by default */
#define DA_EMULATE_ALUA 0
/* Enforce SCSI Initiator Port TransportID with 'ISID' for PR */
#define DA_ENFORCE_PR_ISIDS 1
#define DA_STATUS_MAX_SECTORS_MIN 16
#define DA_STATUS_MAX_SECTORS_MAX 8192
/* By default don't report non-rotating (solid state) medium */
#define DA_IS_NONROT 0
/* Queue Algorithm Modifier default for restricted reordering in control mode page */
#define DA_EMULATE_REST_REORD 0
#define SE_INQUIRY_BUF 1024
#define SE_MODE_PAGE_BUF 512
#define SE_SENSE_BUF 96
/* struct se_hba->hba_flags */
enum hba_flags_table {
HBA_FLAGS_INTERNAL_USE = 0x01,
HBA_FLAGS_PSCSI_MODE = 0x02,
};
/* struct se_lun->lun_status */
enum transport_lun_status_table {
TRANSPORT_LUN_STATUS_FREE = 0,
TRANSPORT_LUN_STATUS_ACTIVE = 1,
};
/* struct se_portal_group->se_tpg_type */
enum transport_tpg_type_table {
TRANSPORT_TPG_TYPE_NORMAL = 0,
TRANSPORT_TPG_TYPE_DISCOVERY = 1,
};
/* Special transport agnostic struct se_cmd->t_states */
enum transport_state_table {
TRANSPORT_NO_STATE = 0,
TRANSPORT_NEW_CMD = 1,
TRANSPORT_WRITE_PENDING = 3,
TRANSPORT_PROCESSING = 5,
TRANSPORT_COMPLETE = 6,
TRANSPORT_ISTATE_PROCESSING = 11,
TRANSPORT_COMPLETE_QF_WP = 18,
TRANSPORT_COMPLETE_QF_OK = 19,
};
/* Used for struct se_cmd->se_cmd_flags */
enum se_cmd_flags_table {
SCF_SUPPORTED_SAM_OPCODE = 0x00000001,
SCF_TRANSPORT_TASK_SENSE = 0x00000002,
SCF_EMULATED_TASK_SENSE = 0x00000004,
SCF_SCSI_DATA_CDB = 0x00000008,
SCF_SCSI_TMR_CDB = 0x00000010,
SCF_FUA = 0x00000080,
SCF_SE_LUN_CMD = 0x00000100,
SCF_BIDI = 0x00000400,
SCF_SENT_CHECK_CONDITION = 0x00000800,
SCF_OVERFLOW_BIT = 0x00001000,
SCF_UNDERFLOW_BIT = 0x00002000,
SCF_SENT_DELAYED_TAS = 0x00004000,
SCF_ALUA_NON_OPTIMIZED = 0x00008000,
SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC = 0x00020000,
SCF_ACK_KREF = 0x00040000,
SCF_COMPARE_AND_WRITE = 0x00080000,
SCF_COMPARE_AND_WRITE_POST = 0x00100000,
target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-21 02:38:55 +04:00
SCF_CMD_XCOPY_PASSTHROUGH = 0x00200000,
};
/* struct se_dev_entry->lun_flags and struct se_lun->lun_access */
enum transport_lunflags_table {
TRANSPORT_LUNFLAGS_NO_ACCESS = 0x00,
TRANSPORT_LUNFLAGS_INITIATOR_ACCESS = 0x01,
TRANSPORT_LUNFLAGS_READ_ONLY = 0x02,
TRANSPORT_LUNFLAGS_READ_WRITE = 0x04,
};
/*
* Used by transport_send_check_condition_and_sense()
* to signal which ASC/ASCQ sense payload should be built.
*/
typedef unsigned __bitwise__ sense_reason_t;
enum tcm_sense_reason_table {
#define R(x) (__force sense_reason_t )(x)
TCM_NO_SENSE = R(0x00),
TCM_NON_EXISTENT_LUN = R(0x01),
TCM_UNSUPPORTED_SCSI_OPCODE = R(0x02),
TCM_INCORRECT_AMOUNT_OF_DATA = R(0x03),
TCM_UNEXPECTED_UNSOLICITED_DATA = R(0x04),
TCM_SERVICE_CRC_ERROR = R(0x05),
TCM_SNACK_REJECTED = R(0x06),
TCM_SECTOR_COUNT_TOO_MANY = R(0x07),
TCM_INVALID_CDB_FIELD = R(0x08),
TCM_INVALID_PARAMETER_LIST = R(0x09),
TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE = R(0x0a),
TCM_UNKNOWN_MODE_PAGE = R(0x0b),
TCM_WRITE_PROTECTED = R(0x0c),
TCM_CHECK_CONDITION_ABORT_CMD = R(0x0d),
TCM_CHECK_CONDITION_UNIT_ATTENTION = R(0x0e),
TCM_CHECK_CONDITION_NOT_READY = R(0x0f),
TCM_RESERVATION_CONFLICT = R(0x10),
TCM_ADDRESS_OUT_OF_RANGE = R(0x11),
TCM_OUT_OF_RESOURCES = R(0x12),
TCM_PARAMETER_LIST_LENGTH_ERROR = R(0x13),
TCM_MISCOMPARE_VERIFY = R(0x14),
TCM_LOGICAL_BLOCK_GUARD_CHECK_FAILED = R(0x15),
TCM_LOGICAL_BLOCK_APP_TAG_CHECK_FAILED = R(0x16),
TCM_LOGICAL_BLOCK_REF_TAG_CHECK_FAILED = R(0x17),
#undef R
};
enum target_sc_flags_table {
TARGET_SCF_BIDI_OP = 0x01,
TARGET_SCF_ACK_KREF = 0x02,
TARGET_SCF_UNKNOWN_SIZE = 0x04,
};
/* fabric independent task management function values */
enum tcm_tmreq_table {
TMR_ABORT_TASK = 1,
TMR_ABORT_TASK_SET = 2,
TMR_CLEAR_ACA = 3,
TMR_CLEAR_TASK_SET = 4,
TMR_LUN_RESET = 5,
TMR_TARGET_WARM_RESET = 6,
TMR_TARGET_COLD_RESET = 7,
};
/* fabric independent task management response values */
enum tcm_tmrsp_table {
TMR_FUNCTION_FAILED = 0,
TMR_FUNCTION_COMPLETE = 1,
TMR_TASK_DOES_NOT_EXIST = 2,
TMR_LUN_DOES_NOT_EXIST = 3,
TMR_TASK_MGMT_FUNCTION_NOT_SUPPORTED = 4,
TMR_FUNCTION_REJECTED = 5,
};
/*
* Used for target SCSI statistics
*/
typedef enum {
SCSI_INST_INDEX,
SCSI_DEVICE_INDEX,
SCSI_AUTH_INTR_INDEX,
SCSI_INDEX_TYPE_MAX
} scsi_index_t;
struct se_cmd;
struct t10_alua_lba_map_member {
struct list_head lba_map_mem_list;
int lba_map_mem_alua_state;
int lba_map_mem_alua_pg_id;
};
struct t10_alua_lba_map {
u64 lba_map_first_lba;
u64 lba_map_last_lba;
struct list_head lba_map_list;
struct list_head lba_map_mem_list;
};
struct t10_alua {
/* ALUA Target Port Group ID */
u16 alua_tg_pt_gps_counter;
u32 alua_tg_pt_gps_count;
/* Referrals support */
spinlock_t lba_map_lock;
u32 lba_map_segment_size;
u32 lba_map_segment_multiplier;
struct list_head lba_map_list;
spinlock_t tg_pt_gps_lock;
struct se_device *t10_dev;
/* Used for default ALUA Target Port Group */
struct t10_alua_tg_pt_gp *default_tg_pt_gp;
/* Used for default ALUA Target Port Group ConfigFS group */
struct config_group alua_tg_pt_gps_group;
struct list_head tg_pt_gps_list;
};
struct t10_alua_lu_gp {
u16 lu_gp_id;
int lu_gp_valid_id;
u32 lu_gp_members;
atomic_t lu_gp_ref_cnt;
spinlock_t lu_gp_lock;
struct config_group lu_gp_group;
2011-07-19 12:55:10 +04:00
struct list_head lu_gp_node;
struct list_head lu_gp_mem_list;
};
struct t10_alua_lu_gp_member {
bool lu_gp_assoc;
atomic_t lu_gp_mem_ref_cnt;
spinlock_t lu_gp_mem_lock;
struct t10_alua_lu_gp *lu_gp;
struct se_device *lu_gp_mem_dev;
struct list_head lu_gp_mem_list;
};
struct t10_alua_tg_pt_gp {
u16 tg_pt_gp_id;
int tg_pt_gp_valid_id;
int tg_pt_gp_alua_supported_states;
int tg_pt_gp_alua_pending_state;
int tg_pt_gp_alua_previous_state;
int tg_pt_gp_alua_access_status;
int tg_pt_gp_alua_access_type;
int tg_pt_gp_nonop_delay_msecs;
int tg_pt_gp_trans_delay_msecs;
int tg_pt_gp_implicit_trans_secs;
int tg_pt_gp_pref;
int tg_pt_gp_write_metadata;
u32 tg_pt_gp_members;
atomic_t tg_pt_gp_alua_access_state;
atomic_t tg_pt_gp_ref_cnt;
spinlock_t tg_pt_gp_lock;
struct mutex tg_pt_gp_md_mutex;
struct se_device *tg_pt_gp_dev;
struct config_group tg_pt_gp_group;
struct list_head tg_pt_gp_list;
struct list_head tg_pt_gp_mem_list;
struct se_port *tg_pt_gp_alua_port;
struct se_node_acl *tg_pt_gp_alua_nacl;
struct delayed_work tg_pt_gp_transition_work;
struct completion *tg_pt_gp_transition_complete;
};
struct t10_alua_tg_pt_gp_member {
bool tg_pt_gp_assoc;
atomic_t tg_pt_gp_mem_ref_cnt;
spinlock_t tg_pt_gp_mem_lock;
struct t10_alua_tg_pt_gp *tg_pt_gp;
struct se_port *tg_pt;
struct list_head tg_pt_gp_mem_list;
};
struct t10_vpd {
unsigned char device_identifier[INQUIRY_VPD_DEVICE_IDENTIFIER_LEN];
int protocol_identifier_set;
u32 protocol_identifier;
u32 device_identifier_code_set;
u32 association;
u32 device_identifier_type;
struct list_head vpd_list;
};
struct t10_wwn {
2011-07-19 12:55:10 +04:00
char vendor[8];
char model[16];
char revision[4];
char unit_serial[INQUIRY_VPD_SERIAL_LEN];
spinlock_t t10_vpd_lock;
struct se_device *t10_dev;
struct config_group t10_wwn_group;
struct list_head t10_vpd_list;
};
struct t10_pr_registration {
/* Used for fabrics that contain WWN+ISID */
#define PR_REG_ISID_LEN 16
/* PR_REG_ISID_LEN + ',i,0x' */
#define PR_REG_ISID_ID_LEN (PR_REG_ISID_LEN + 5)
char pr_reg_isid[PR_REG_ISID_LEN];
/* Used during APTPL metadata reading */
#define PR_APTPL_MAX_IPORT_LEN 256
unsigned char pr_iport[PR_APTPL_MAX_IPORT_LEN];
/* Used during APTPL metadata reading */
#define PR_APTPL_MAX_TPORT_LEN 256
unsigned char pr_tport[PR_APTPL_MAX_TPORT_LEN];
u16 pr_aptpl_rpti;
u16 pr_reg_tpgt;
/* Reservation effects all target ports */
int pr_reg_all_tg_pt;
/* Activate Persistence across Target Power Loss */
int pr_reg_aptpl;
int pr_res_holder;
int pr_res_type;
int pr_res_scope;
/* Used for fabric initiator WWPNs using a ISID */
bool isid_present_at_reg;
u32 pr_res_mapped_lun;
u32 pr_aptpl_target_lun;
u32 pr_res_generation;
u64 pr_reg_bin_isid;
u64 pr_res_key;
atomic_t pr_res_holders;
struct se_node_acl *pr_reg_nacl;
struct se_dev_entry *pr_reg_deve;
struct se_lun *pr_reg_tg_pt_lun;
struct list_head pr_reg_list;
struct list_head pr_reg_abort_list;
struct list_head pr_reg_aptpl_list;
struct list_head pr_reg_atp_list;
struct list_head pr_reg_atp_mem_list;
};
2011-07-19 12:55:10 +04:00
struct t10_reservation {
/* Reservation effects all target ports */
int pr_all_tg_pt;
/* Activate Persistence across Target Power Loss enabled
* for SCSI device */
int pr_aptpl_active;
#define PR_APTPL_BUF_LEN 8192
u32 pr_generation;
spinlock_t registration_lock;
spinlock_t aptpl_reg_lock;
/*
* This will always be set by one individual I_T Nexus.
* However with all_tg_pt=1, other I_T Nexus from the
* same initiator can access PR reg/res info on a different
* target port.
*
* There is also the 'All Registrants' case, where there is
* a single *pr_res_holder of the reservation, but all
* registrations are considered reservation holders.
*/
struct se_node_acl *pr_res_holder;
struct list_head registration_list;
struct list_head aptpl_reg_list;
};
struct se_tmr_req {
/* Task Management function to be performed */
u8 function;
/* Task Management response to send */
u8 response;
int call_transport;
/* Reference to ITT that Task Mgmt should be performed */
u32 ref_task_tag;
void *fabric_tmr_ptr;
struct se_cmd *task_cmd;
struct se_device *tmr_dev;
struct se_lun *tmr_lun;
struct list_head tmr_list;
};
enum target_prot_op {
TARGET_PROT_NORMAL = 0,
TARGET_PROT_DIN_INSERT,
TARGET_PROT_DOUT_INSERT,
TARGET_PROT_DIN_STRIP,
TARGET_PROT_DOUT_STRIP,
TARGET_PROT_DIN_PASS,
TARGET_PROT_DOUT_PASS,
};
enum target_prot_ho {
PROT_SEPERATED,
PROT_INTERLEAVED,
};
enum target_prot_type {
TARGET_DIF_TYPE0_PROT,
TARGET_DIF_TYPE1_PROT,
TARGET_DIF_TYPE2_PROT,
TARGET_DIF_TYPE3_PROT,
};
enum target_core_dif_check {
TARGET_DIF_CHECK_GUARD = 0x1 << 0,
TARGET_DIF_CHECK_APPTAG = 0x1 << 1,
TARGET_DIF_CHECK_REFTAG = 0x1 << 2,
};
struct se_dif_v1_tuple {
__be16 guard_tag;
__be16 app_tag;
__be32 ref_tag;
};
struct se_cmd {
/* SAM response code being sent to initiator */
u8 scsi_status;
u8 scsi_asc;
u8 scsi_ascq;
u16 scsi_sense_length;
/* Delay for ALUA Active/NonOptimized state access in milliseconds */
int alua_nonop_delay;
/* See include/linux/dma-mapping.h */
enum dma_data_direction data_direction;
/* For SAM Task Attribute */
int sam_task_attr;
/* Used for se_sess->sess_tag_pool */
unsigned int map_tag;
/* Transport protocol dependent state, see transport_state_table */
enum transport_state_table t_state;
unsigned cmd_wait_set:1;
unsigned unknown_data_length:1;
/* See se_cmd_flags_table */
u32 se_cmd_flags;
u32 se_ordered_id;
/* Total size in bytes associated with command */
u32 data_length;
u32 residual_count;
u32 orig_fe_lun;
/* Persistent Reservation key */
u64 pr_res_key;
/* Used for sense data */
void *sense_buffer;
struct list_head se_delayed_node;
struct list_head se_qf_node;
struct se_device *se_dev;
struct se_dev_entry *se_deve;
struct se_lun *se_lun;
/* Only used for internal passthrough and legacy TCM fabric modules */
struct se_session *se_sess;
struct se_tmr_req *se_tmr_req;
target: Add generic active I/O shutdown logic This patch adds the initial pieces of generic active I/O shutdown logic. This is intended to be a 'opt-in' feature for fabric modules that includes the following functions to provide a mechinism for fabric modules to track se_cmd via se_session->sess_cmd_list: *) target_get_sess_cmd() - Add se_cmd to sess->sess_cmd_list, called from fabric module incoming I/O path. *) target_put_sess_cmd() - Check for completion or drop se_cmd from ->sess_cmd_list *) target_splice_sess_cmd_list() - Splice active I/O list from ->sess_cmd_list to ->sess_wait_list, can called with HW fabric lock held. *) target_wait_for_sess_cmds() - Walk ->sess_wait_list waiting on individual ->cmd_wait_comp. Optional transport_wait_for_tasks() call. target_splice_sess_cmd_list() is allowed to be called under HW fabric lock, and performs the splice into se_sess->sess_wait_list and set se_cmd->cmd_wait_set. Then target_wait_for_sess_cmds() walks the list waiting for individual target_put_sess_cmd() fabric callbacks to complete. It also adds TFO->check_release_cmd() to split the completion and memory release calls, where a fabric module uses target_put_sess_cmd() to check for I/O completion during session shutdown. This is currently pushed out into fabric modules as current fabric code may sleep here waiting for TFO->check_stop_free() to complete in main response path, and because target_wait_for_sess_cmds() calling TFO->release_cmd() to free fabric descriptor memory directly. Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-11-03 08:52:08 +04:00
struct list_head se_cmd_list;
struct completion cmd_wait_comp;
struct kref cmd_kref;
struct target_core_fabric_ops *se_tfo;
sense_reason_t (*execute_cmd)(struct se_cmd *);
sense_reason_t (*execute_rw)(struct se_cmd *, struct scatterlist *,
u32, enum dma_data_direction);
sense_reason_t (*transport_complete_callback)(struct se_cmd *);
target: Updates from AGrover and HCH (round 3) This patch contains a squashed version of third round series cleanups, improvements ,and simplfications from Andy and Christoph ahead of the heavy lifting between round 3 -> 4 for the target core SGL conversion. This include cleanups to the main target I/O path and other miscellaneous updates. target: Replace custom sg<->buf functions with lib funcs target: Simplify sector limiting code target: get_cdb should never return NULL target: Simplify transport_memcpy_se_mem_read_contig target: Use assignment rather than increment for t_task_cdbs target: Don't pass dma_size to generic_get_mem target: Pass sg with type scatterlist in transport_map_sg_to_mem target: Move task_sg_num next to task_sg in struct se_task target: inline struct se_transport_task into struct se_cmd target: Change name & semantics of transport_get_sectors() target: Remove unused members of se_cmd target: Rename se_cmd.t_task_cdbs to t_task_list_num target: Fix some spelling target: Remove unused var from transport_generic_do_tmr target: map_sg_to_mem: return sg_count in return value target/pscsi: Use min_t for sector limits target/pscsi: Unused param for pscsi_get_bio() target: Rename get_cdb_count to allocate_tasks target: Make transport_generic_new_cmd() available for iscsi-target target: Remove fabric callback to allocate iovecs target: Fix transport_generic_new_cmd WRITE comment (hch: Use __GFP_ZERO usage for alloc_pages() usage) Signed-off-by: Andy Grover <agrover@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-05-03 04:12:10 +04:00
unsigned char *t_task_cdb;
unsigned char __t_task_cdb[TCM_MAX_COMMAND_SIZE];
unsigned long long t_task_lba;
unsigned int t_task_nolb;
unsigned int transport_state;
#define CMD_T_ABORTED (1 << 0)
#define CMD_T_ACTIVE (1 << 1)
#define CMD_T_COMPLETE (1 << 2)
#define CMD_T_SENT (1 << 4)
#define CMD_T_STOP (1 << 5)
#define CMD_T_DEV_ACTIVE (1 << 7)
#define CMD_T_REQUEST_STOP (1 << 8)
#define CMD_T_BUSY (1 << 9)
target: Updates from AGrover and HCH (round 3) This patch contains a squashed version of third round series cleanups, improvements ,and simplfications from Andy and Christoph ahead of the heavy lifting between round 3 -> 4 for the target core SGL conversion. This include cleanups to the main target I/O path and other miscellaneous updates. target: Replace custom sg<->buf functions with lib funcs target: Simplify sector limiting code target: get_cdb should never return NULL target: Simplify transport_memcpy_se_mem_read_contig target: Use assignment rather than increment for t_task_cdbs target: Don't pass dma_size to generic_get_mem target: Pass sg with type scatterlist in transport_map_sg_to_mem target: Move task_sg_num next to task_sg in struct se_task target: inline struct se_transport_task into struct se_cmd target: Change name & semantics of transport_get_sectors() target: Remove unused members of se_cmd target: Rename se_cmd.t_task_cdbs to t_task_list_num target: Fix some spelling target: Remove unused var from transport_generic_do_tmr target: map_sg_to_mem: return sg_count in return value target/pscsi: Use min_t for sector limits target/pscsi: Unused param for pscsi_get_bio() target: Rename get_cdb_count to allocate_tasks target: Make transport_generic_new_cmd() available for iscsi-target target: Remove fabric callback to allocate iovecs target: Fix transport_generic_new_cmd WRITE comment (hch: Use __GFP_ZERO usage for alloc_pages() usage) Signed-off-by: Andy Grover <agrover@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-05-03 04:12:10 +04:00
spinlock_t t_state_lock;
struct completion t_transport_stop_comp;
struct work_struct work;
struct scatterlist *t_data_sg;
struct scatterlist *t_data_sg_orig;
unsigned int t_data_nents;
unsigned int t_data_nents_orig;
void *t_data_vmap;
struct scatterlist *t_bidi_data_sg;
unsigned int t_bidi_data_nents;
struct list_head state_list;
bool state_active;
/* old task stop completion, consider merging with some of the above */
struct completion task_stop_comp;
/* backend private data */
void *priv;
/* Used for lun->lun_ref counting */
int lun_ref_active;
/* DIF related members */
enum target_prot_op prot_op;
enum target_prot_type prot_type;
u8 prot_checks;
u32 prot_length;
u32 reftag_seed;
struct scatterlist *t_prot_sg;
unsigned int t_prot_nents;
enum target_prot_ho prot_handover;
sense_reason_t pi_err;
sector_t bad_sector;
};
struct se_ua {
u8 ua_asc;
u8 ua_ascq;
struct se_node_acl *ua_nacl;
struct list_head ua_nacl_list;
};
struct se_node_acl {
char initiatorname[TRANSPORT_IQN_LEN];
/* Used to signal demo mode created ACL, disabled by default */
bool dynamic_node_acl;
bool acl_stop:1;
u32 queue_depth;
u32 acl_index;
#define MAX_ACL_TAG_SIZE 64
char acl_tag[MAX_ACL_TAG_SIZE];
/* Used for PR SPEC_I_PT=1 and REGISTER_AND_MOVE */
atomic_t acl_pr_ref_count;
struct se_dev_entry **device_list;
struct se_session *nacl_sess;
struct se_portal_group *se_tpg;
spinlock_t device_list_lock;
spinlock_t nacl_sess_lock;
struct config_group acl_group;
struct config_group acl_attrib_group;
struct config_group acl_auth_group;
struct config_group acl_param_group;
[SCSI] target: add initial statistics This patch adds a target_core_mib.c statistics conversion for backend context struct se_subsystem_dev + struct se_device config_group based statistics in target_core_device.c using CONFIGFS_EATTR() based struct config_item_types from target_core_stat.c code. The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_dev, scsi_lu, and scsi_tgt_dev output from within individual: /sys/kernel/config/target/core/$HBA/DEV/ The legacy procfs output now appear as individual configfs attributes under: *) $HBA/$DEV/statistics/scsi_dev: |-- indx |-- inst |-- ports `-- role *) $HBA/$DEV/statistics/scsi_lu: |-- creation_time |-- dev |-- dev_type |-- full_stat |-- hs_num_cmds |-- indx |-- inst |-- lu_name |-- lun |-- num_cmds |-- prod |-- read_mbytes |-- resets |-- rev |-- state_bit |-- status |-- vend `-- write_mbytes *) $HBA/$DEV/statistics/scsi_tgt_dev: |-- indx |-- inst |-- non_access_lus |-- num_lus |-- resets `-- status The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_port, scsi_tgt_port and scsi_transport output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_port |-- busy_count |-- dev |-- indx |-- inst `-- role *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_tgt_port |-- dev |-- hs_in_cmds |-- in_cmds |-- indx |-- inst |-- name |-- port_index |-- read_mbytes `-- write_mbytes *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_transport |-- dev_name |-- device |-- indx `-- inst The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_att_intr_port and scsi_auth_intr output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_att_intr_port |-- dev |-- indx |-- inst |-- port |-- port_auth_indx `-- port_ident *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_auth_intr |-- att_count |-- creation_time |-- dev |-- dev_or_port |-- hs_num_cmds |-- indx |-- inst |-- intr_name |-- map_indx |-- num_cmds |-- port |-- read_mbytes |-- row_status `-- write_mbytes Also, this includes adding struct target_fabric_configfs_template-> tfc_wwn_fabric_stats_cit and ->tfc_tpg_nacl_stat_cit respectively for use during target_core_fabric_configfs.c:target_fabric_setup_cits() Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-14 14:06:11 +03:00
struct config_group acl_fabric_stat_group;
struct config_group *acl_default_groups[5];
struct list_head acl_list;
struct list_head acl_sess_list;
struct completion acl_free_comp;
struct kref acl_kref;
};
struct se_session {
unsigned sess_tearing_down:1;
u64 sess_bin_isid;
struct se_node_acl *se_node_acl;
struct se_portal_group *se_tpg;
void *fabric_sess_ptr;
struct list_head sess_list;
struct list_head sess_acl_list;
target: Add generic active I/O shutdown logic This patch adds the initial pieces of generic active I/O shutdown logic. This is intended to be a 'opt-in' feature for fabric modules that includes the following functions to provide a mechinism for fabric modules to track se_cmd via se_session->sess_cmd_list: *) target_get_sess_cmd() - Add se_cmd to sess->sess_cmd_list, called from fabric module incoming I/O path. *) target_put_sess_cmd() - Check for completion or drop se_cmd from ->sess_cmd_list *) target_splice_sess_cmd_list() - Splice active I/O list from ->sess_cmd_list to ->sess_wait_list, can called with HW fabric lock held. *) target_wait_for_sess_cmds() - Walk ->sess_wait_list waiting on individual ->cmd_wait_comp. Optional transport_wait_for_tasks() call. target_splice_sess_cmd_list() is allowed to be called under HW fabric lock, and performs the splice into se_sess->sess_wait_list and set se_cmd->cmd_wait_set. Then target_wait_for_sess_cmds() walks the list waiting for individual target_put_sess_cmd() fabric callbacks to complete. It also adds TFO->check_release_cmd() to split the completion and memory release calls, where a fabric module uses target_put_sess_cmd() to check for I/O completion during session shutdown. This is currently pushed out into fabric modules as current fabric code may sleep here waiting for TFO->check_stop_free() to complete in main response path, and because target_wait_for_sess_cmds() calling TFO->release_cmd() to free fabric descriptor memory directly. Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-11-03 08:52:08 +04:00
struct list_head sess_cmd_list;
struct list_head sess_wait_list;
target: Add generic active I/O shutdown logic This patch adds the initial pieces of generic active I/O shutdown logic. This is intended to be a 'opt-in' feature for fabric modules that includes the following functions to provide a mechinism for fabric modules to track se_cmd via se_session->sess_cmd_list: *) target_get_sess_cmd() - Add se_cmd to sess->sess_cmd_list, called from fabric module incoming I/O path. *) target_put_sess_cmd() - Check for completion or drop se_cmd from ->sess_cmd_list *) target_splice_sess_cmd_list() - Splice active I/O list from ->sess_cmd_list to ->sess_wait_list, can called with HW fabric lock held. *) target_wait_for_sess_cmds() - Walk ->sess_wait_list waiting on individual ->cmd_wait_comp. Optional transport_wait_for_tasks() call. target_splice_sess_cmd_list() is allowed to be called under HW fabric lock, and performs the splice into se_sess->sess_wait_list and set se_cmd->cmd_wait_set. Then target_wait_for_sess_cmds() walks the list waiting for individual target_put_sess_cmd() fabric callbacks to complete. It also adds TFO->check_release_cmd() to split the completion and memory release calls, where a fabric module uses target_put_sess_cmd() to check for I/O completion during session shutdown. This is currently pushed out into fabric modules as current fabric code may sleep here waiting for TFO->check_stop_free() to complete in main response path, and because target_wait_for_sess_cmds() calling TFO->release_cmd() to free fabric descriptor memory directly. Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-11-03 08:52:08 +04:00
spinlock_t sess_cmd_lock;
struct kref sess_kref;
void *sess_cmd_map;
struct percpu_ida sess_tag_pool;
};
struct se_device;
struct se_transform_info;
struct scatterlist;
[SCSI] target: add initial statistics This patch adds a target_core_mib.c statistics conversion for backend context struct se_subsystem_dev + struct se_device config_group based statistics in target_core_device.c using CONFIGFS_EATTR() based struct config_item_types from target_core_stat.c code. The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_dev, scsi_lu, and scsi_tgt_dev output from within individual: /sys/kernel/config/target/core/$HBA/DEV/ The legacy procfs output now appear as individual configfs attributes under: *) $HBA/$DEV/statistics/scsi_dev: |-- indx |-- inst |-- ports `-- role *) $HBA/$DEV/statistics/scsi_lu: |-- creation_time |-- dev |-- dev_type |-- full_stat |-- hs_num_cmds |-- indx |-- inst |-- lu_name |-- lun |-- num_cmds |-- prod |-- read_mbytes |-- resets |-- rev |-- state_bit |-- status |-- vend `-- write_mbytes *) $HBA/$DEV/statistics/scsi_tgt_dev: |-- indx |-- inst |-- non_access_lus |-- num_lus |-- resets `-- status The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_port, scsi_tgt_port and scsi_transport output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_port |-- busy_count |-- dev |-- indx |-- inst `-- role *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_tgt_port |-- dev |-- hs_in_cmds |-- in_cmds |-- indx |-- inst |-- name |-- port_index |-- read_mbytes `-- write_mbytes *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_transport |-- dev_name |-- device |-- indx `-- inst The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_att_intr_port and scsi_auth_intr output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_att_intr_port |-- dev |-- indx |-- inst |-- port |-- port_auth_indx `-- port_ident *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_auth_intr |-- att_count |-- creation_time |-- dev |-- dev_or_port |-- hs_num_cmds |-- indx |-- inst |-- intr_name |-- map_indx |-- num_cmds |-- port |-- read_mbytes |-- row_status `-- write_mbytes Also, this includes adding struct target_fabric_configfs_template-> tfc_wwn_fabric_stats_cit and ->tfc_tpg_nacl_stat_cit respectively for use during target_core_fabric_configfs.c:target_fabric_setup_cits() Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-14 14:06:11 +03:00
struct se_ml_stat_grps {
struct config_group stat_group;
struct config_group scsi_auth_intr_group;
struct config_group scsi_att_intr_port_group;
};
struct se_lun_acl {
char initiatorname[TRANSPORT_IQN_LEN];
u32 mapped_lun;
struct se_node_acl *se_lun_nacl;
struct se_lun *se_lun;
struct list_head lacl_list;
struct config_group se_lun_group;
[SCSI] target: add initial statistics This patch adds a target_core_mib.c statistics conversion for backend context struct se_subsystem_dev + struct se_device config_group based statistics in target_core_device.c using CONFIGFS_EATTR() based struct config_item_types from target_core_stat.c code. The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_dev, scsi_lu, and scsi_tgt_dev output from within individual: /sys/kernel/config/target/core/$HBA/DEV/ The legacy procfs output now appear as individual configfs attributes under: *) $HBA/$DEV/statistics/scsi_dev: |-- indx |-- inst |-- ports `-- role *) $HBA/$DEV/statistics/scsi_lu: |-- creation_time |-- dev |-- dev_type |-- full_stat |-- hs_num_cmds |-- indx |-- inst |-- lu_name |-- lun |-- num_cmds |-- prod |-- read_mbytes |-- resets |-- rev |-- state_bit |-- status |-- vend `-- write_mbytes *) $HBA/$DEV/statistics/scsi_tgt_dev: |-- indx |-- inst |-- non_access_lus |-- num_lus |-- resets `-- status The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_port, scsi_tgt_port and scsi_transport output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_port |-- busy_count |-- dev |-- indx |-- inst `-- role *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_tgt_port |-- dev |-- hs_in_cmds |-- in_cmds |-- indx |-- inst |-- name |-- port_index |-- read_mbytes `-- write_mbytes *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_transport |-- dev_name |-- device |-- indx `-- inst The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_att_intr_port and scsi_auth_intr output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_att_intr_port |-- dev |-- indx |-- inst |-- port |-- port_auth_indx `-- port_ident *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_auth_intr |-- att_count |-- creation_time |-- dev |-- dev_or_port |-- hs_num_cmds |-- indx |-- inst |-- intr_name |-- map_indx |-- num_cmds |-- port |-- read_mbytes |-- row_status `-- write_mbytes Also, this includes adding struct target_fabric_configfs_template-> tfc_wwn_fabric_stats_cit and ->tfc_tpg_nacl_stat_cit respectively for use during target_core_fabric_configfs.c:target_fabric_setup_cits() Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-14 14:06:11 +03:00
struct se_ml_stat_grps ml_stat_grps;
};
struct se_dev_entry {
bool def_pr_registered;
/* See transport_lunflags_table */
u32 lun_flags;
u32 mapped_lun;
u32 total_cmds;
u64 pr_res_key;
u64 creation_time;
u32 attach_count;
u64 read_bytes;
u64 write_bytes;
atomic_t ua_count;
/* Used for PR SPEC_I_PT=1 and REGISTER_AND_MOVE */
atomic_t pr_ref_count;
struct se_lun_acl *se_lun_acl;
spinlock_t ua_lock;
struct se_lun *se_lun;
struct list_head alua_port_list;
struct list_head ua_list;
};
struct se_dev_attrib {
int emulate_model_alias;
int emulate_dpo;
int emulate_fua_write;
int emulate_fua_read;
int emulate_write_cache;
int emulate_ua_intlck_ctrl;
int emulate_tas;
int emulate_tpu;
int emulate_tpws;
int emulate_caw;
int emulate_3pc;
int pi_prot_format;
enum target_prot_type pi_prot_type;
enum target_prot_type hw_pi_prot_type;
int enforce_pr_isids;
int is_nonrot;
int emulate_rest_reord;
u32 hw_block_size;
u32 block_size;
u32 hw_max_sectors;
u32 fabric_max_sectors;
u32 optimal_sectors;
u32 hw_queue_depth;
u32 queue_depth;
u32 max_unmap_lba_count;
u32 max_unmap_block_desc_count;
u32 unmap_granularity;
u32 unmap_granularity_alignment;
u32 max_write_same_len;
u32 max_bytes_per_io;
struct se_device *da_dev;
struct config_group da_group;
};
struct se_port_stat_grps {
struct config_group stat_group;
struct config_group scsi_port_group;
struct config_group scsi_tgt_port_group;
struct config_group scsi_transport_group;
};
struct se_lun {
#define SE_LUN_LINK_MAGIC 0xffff7771
u32 lun_link_magic;
/* See transport_lun_status_table */
enum transport_lun_status_table lun_status;
u32 lun_access;
u32 lun_flags;
u32 unpacked_lun;
atomic_t lun_acl_count;
spinlock_t lun_acl_lock;
spinlock_t lun_sep_lock;
struct completion lun_shutdown_comp;
struct list_head lun_acl_list;
struct se_device *lun_se_dev;
struct se_port *lun_sep;
struct config_group lun_group;
struct se_port_stat_grps port_stat_grps;
struct completion lun_ref_comp;
struct percpu_ref lun_ref;
};
[SCSI] target: add initial statistics This patch adds a target_core_mib.c statistics conversion for backend context struct se_subsystem_dev + struct se_device config_group based statistics in target_core_device.c using CONFIGFS_EATTR() based struct config_item_types from target_core_stat.c code. The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_dev, scsi_lu, and scsi_tgt_dev output from within individual: /sys/kernel/config/target/core/$HBA/DEV/ The legacy procfs output now appear as individual configfs attributes under: *) $HBA/$DEV/statistics/scsi_dev: |-- indx |-- inst |-- ports `-- role *) $HBA/$DEV/statistics/scsi_lu: |-- creation_time |-- dev |-- dev_type |-- full_stat |-- hs_num_cmds |-- indx |-- inst |-- lu_name |-- lun |-- num_cmds |-- prod |-- read_mbytes |-- resets |-- rev |-- state_bit |-- status |-- vend `-- write_mbytes *) $HBA/$DEV/statistics/scsi_tgt_dev: |-- indx |-- inst |-- non_access_lus |-- num_lus |-- resets `-- status The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_port, scsi_tgt_port and scsi_transport output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_port |-- busy_count |-- dev |-- indx |-- inst `-- role *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_tgt_port |-- dev |-- hs_in_cmds |-- in_cmds |-- indx |-- inst |-- name |-- port_index |-- read_mbytes `-- write_mbytes *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_transport |-- dev_name |-- device |-- indx `-- inst The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_att_intr_port and scsi_auth_intr output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_att_intr_port |-- dev |-- indx |-- inst |-- port |-- port_auth_indx `-- port_ident *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_auth_intr |-- att_count |-- creation_time |-- dev |-- dev_or_port |-- hs_num_cmds |-- indx |-- inst |-- intr_name |-- map_indx |-- num_cmds |-- port |-- read_mbytes |-- row_status `-- write_mbytes Also, this includes adding struct target_fabric_configfs_template-> tfc_wwn_fabric_stats_cit and ->tfc_tpg_nacl_stat_cit respectively for use during target_core_fabric_configfs.c:target_fabric_setup_cits() Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-14 14:06:11 +03:00
struct se_dev_stat_grps {
struct config_group stat_group;
struct config_group scsi_dev_group;
struct config_group scsi_tgt_dev_group;
struct config_group scsi_lu_group;
};
struct se_device {
#define SE_DEV_LINK_MAGIC 0xfeeddeef
u32 dev_link_magic;
/* RELATIVE TARGET PORT IDENTIFER Counter */
u16 dev_rpti_counter;
/* Used for SAM Task Attribute ordering */
u32 dev_cur_ordered_id;
u32 dev_flags;
#define DF_CONFIGURED 0x00000001
#define DF_FIRMWARE_VPD_UNIT_SERIAL 0x00000002
#define DF_EMULATED_VPD_UNIT_SERIAL 0x00000004
#define DF_USING_UDEV_PATH 0x00000008
#define DF_USING_ALIAS 0x00000010
u32 dev_port_count;
/* Physical device queue depth */
u32 queue_depth;
/* Used for SPC-2 reservations enforce of ISIDs */
u64 dev_res_bin_isid;
/* Pointer to transport specific device structure */
u32 dev_index;
u64 creation_time;
atomic_long_t num_resets;
atomic_long_t num_cmds;
atomic_long_t read_bytes;
atomic_long_t write_bytes;
/* Active commands on this virtual SE device */
atomic_t simple_cmds;
atomic_t dev_ordered_id;
atomic_t dev_ordered_sync;
atomic_t dev_qf_count;
int export_count;
spinlock_t delayed_cmd_lock;
spinlock_t execute_task_lock;
spinlock_t dev_reservation_lock;
unsigned int dev_reservation_flags;
#define DRF_SPC2_RESERVATIONS 0x00000001
#define DRF_SPC2_RESERVATIONS_WITH_ISID 0x00000002
spinlock_t se_port_lock;
spinlock_t se_tmr_lock;
spinlock_t qf_cmd_lock;
target: Add support for COMPARE_AND_WRITE emulation This patch adds support for COMPARE_AND_WRITE emulation on a per block basis. This logic is used as an atomic test and set primative currently used by VMWare ESX VAAI for performing array side locking of individual VMFS extent ownership. This includes the COMPARE_AND_WRITE CDB parsing within sbc_parse_cdb(), and does the majority of the work within the compare_and_write_callback() to perform the verify instance user data comparision, and subsequent write instance user data I/O submission upon a successfull comparision. The synchronization is enforced by se_device->caw_sem, that is obtained before the initial READ I/O submission in sbc_compare_and_write(). The mutex is then released upon MISCOMPARE in compare_and_write_callback(), or upon WRITE instance user-data completion in compare_and_write_post(). The implementation currently assumes a single logical block (NoLB=1). v4 changes: - Explicitly clear cmd->transport_complete_callback for two failure cases in sbc_compare_and_write() in order to avoid double unlock of ->caw_sem in compare_and_write_callback() (Dan Carpenter) v3 changes: - Convert se_device->caw_mutex to ->caw_sem v2 changes: - Set SCF_COMPARE_AND_WRITE and cmd->execute_cmd() to sbc_compare_and_write() during setup in sbc_parse_cdb() - Use sbc_compare_and_write() for initial READ submission with DMA_FROM_DEVICE - Reset cmd->execute_cmd() to sbc_execute_rw() for write instance user-data in compare_and_write_callback() - Drop SCF_BIDI command flag usage - Set TRANSPORT_PROCESSING + transport_state flags before write instance submission, and convert to __target_execute_cmd() - Prevent sbc_get_size() from being being called twice to generate incorrect size in sbc_parse_cdb() - Enforce se_device->caw_mutex synchronization between initial READ I/O submission, and final WRITE I/O completion. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-20 02:20:28 +04:00
struct semaphore caw_sem;
/* Used for legacy SPC-2 reservationsa */
struct se_node_acl *dev_reserved_node_acl;
/* Used for ALUA Logical Unit Group membership */
struct t10_alua_lu_gp_member *dev_alua_lu_gp_mem;
/* Used for SPC-3 Persistent Reservations */
struct t10_pr_registration *dev_pr_res_holder;
struct list_head dev_sep_list;
struct list_head dev_tmr_list;
struct workqueue_struct *tmr_wq;
struct work_struct qf_work_queue;
struct list_head delayed_cmd_list;
struct list_head state_list;
struct list_head qf_cmd_list;
struct list_head g_dev_node;
/* Pointer to associated SE HBA */
struct se_hba *se_hba;
/* T10 Inquiry and VPD WWN Information */
struct t10_wwn t10_wwn;
/* T10 Asymmetric Logical Unit Assignment for Target Ports */
struct t10_alua t10_alua;
/* T10 SPC-2 + SPC-3 Reservations */
struct t10_reservation t10_pr;
struct se_dev_attrib dev_attrib;
struct config_group dev_group;
struct config_group dev_pr_group;
struct se_dev_stat_grps dev_stat_grps;
#define SE_DEV_ALIAS_LEN 512 /* must be less than PAGE_SIZE */
unsigned char dev_alias[SE_DEV_ALIAS_LEN];
#define SE_UDEV_PATH_LEN 512 /* must be less than PAGE_SIZE */
unsigned char udev_path[SE_UDEV_PATH_LEN];
/* Pointer to template of function pointers for transport */
struct se_subsystem_api *transport;
/* Linked list for struct se_hba struct se_device list */
struct list_head dev_list;
struct se_lun xcopy_lun;
/* Protection Information */
int prot_length;
};
struct se_hba {
u16 hba_tpgt;
u32 hba_id;
/* See hba_flags_table */
u32 hba_flags;
/* Virtual iSCSI devices attached. */
u32 dev_count;
u32 hba_index;
/* Pointer to transport specific host structure. */
void *hba_ptr;
2011-07-19 12:55:10 +04:00
struct list_head hba_node;
spinlock_t device_lock;
struct config_group hba_group;
struct mutex hba_access_mutex;
struct se_subsystem_api *transport;
};
struct scsi_port_stats {
u64 cmd_pdus;
u64 tx_data_octets;
u64 rx_data_octets;
};
struct se_port {
/* RELATIVE TARGET PORT IDENTIFER */
u16 sep_rtpi;
int sep_tg_pt_secondary_stat;
int sep_tg_pt_secondary_write_md;
u32 sep_index;
struct scsi_port_stats sep_stats;
/* Used for ALUA Target Port Groups membership */
atomic_t sep_tg_pt_secondary_offline;
/* Used for PR ALL_TG_PT=1 */
atomic_t sep_tg_pt_ref_cnt;
spinlock_t sep_alua_lock;
struct mutex sep_tg_pt_md_mutex;
struct t10_alua_tg_pt_gp_member *sep_alua_tg_pt_gp_mem;
struct se_lun *sep_lun;
struct se_portal_group *sep_tpg;
struct list_head sep_alua_list;
struct list_head sep_list;
};
struct se_tpg_np {
struct se_portal_group *tpg_np_parent;
struct config_group tpg_np_group;
};
struct se_portal_group {
/* Type of target portal group, see transport_tpg_type_table */
enum transport_tpg_type_table se_tpg_type;
/* Number of ACLed Initiator Nodes for this TPG */
u32 num_node_acls;
/* Used for PR SPEC_I_PT=1 and REGISTER_AND_MOVE */
atomic_t tpg_pr_ref_count;
/* Spinlock for adding/removing ACLed Nodes */
spinlock_t acl_node_lock;
/* Spinlock for adding/removing sessions */
spinlock_t session_lock;
spinlock_t tpg_lun_lock;
/* Pointer to $FABRIC_MOD portal group */
void *se_tpg_fabric_ptr;
2011-07-19 12:55:10 +04:00
struct list_head se_tpg_node;
/* linked list for initiator ACL list */
struct list_head acl_node_list;
struct se_lun **tpg_lun_list;
struct se_lun tpg_virt_lun0;
/* List of TCM sessions associated wth this TPG */
struct list_head tpg_sess_list;
/* Pointer to $FABRIC_MOD dependent code */
struct target_core_fabric_ops *se_tpg_tfo;
struct se_wwn *se_tpg_wwn;
struct config_group tpg_group;
struct config_group *tpg_default_groups[7];
struct config_group tpg_lun_group;
struct config_group tpg_np_group;
struct config_group tpg_acl_group;
struct config_group tpg_attrib_group;
struct config_group tpg_auth_group;
struct config_group tpg_param_group;
};
struct se_wwn {
struct target_fabric_configfs *wwn_tf;
struct config_group wwn_group;
[SCSI] target: add initial statistics This patch adds a target_core_mib.c statistics conversion for backend context struct se_subsystem_dev + struct se_device config_group based statistics in target_core_device.c using CONFIGFS_EATTR() based struct config_item_types from target_core_stat.c code. The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_dev, scsi_lu, and scsi_tgt_dev output from within individual: /sys/kernel/config/target/core/$HBA/DEV/ The legacy procfs output now appear as individual configfs attributes under: *) $HBA/$DEV/statistics/scsi_dev: |-- indx |-- inst |-- ports `-- role *) $HBA/$DEV/statistics/scsi_lu: |-- creation_time |-- dev |-- dev_type |-- full_stat |-- hs_num_cmds |-- indx |-- inst |-- lu_name |-- lun |-- num_cmds |-- prod |-- read_mbytes |-- resets |-- rev |-- state_bit |-- status |-- vend `-- write_mbytes *) $HBA/$DEV/statistics/scsi_tgt_dev: |-- indx |-- inst |-- non_access_lus |-- num_lus |-- resets `-- status The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_port, scsi_tgt_port and scsi_transport output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_port |-- busy_count |-- dev |-- indx |-- inst `-- role *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_tgt_port |-- dev |-- hs_in_cmds |-- in_cmds |-- indx |-- inst |-- name |-- port_index |-- read_mbytes `-- write_mbytes *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_transport |-- dev_name |-- device |-- indx `-- inst The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_att_intr_port and scsi_auth_intr output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_att_intr_port |-- dev |-- indx |-- inst |-- port |-- port_auth_indx `-- port_ident *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_auth_intr |-- att_count |-- creation_time |-- dev |-- dev_or_port |-- hs_num_cmds |-- indx |-- inst |-- intr_name |-- map_indx |-- num_cmds |-- port |-- read_mbytes |-- row_status `-- write_mbytes Also, this includes adding struct target_fabric_configfs_template-> tfc_wwn_fabric_stats_cit and ->tfc_tpg_nacl_stat_cit respectively for use during target_core_fabric_configfs.c:target_fabric_setup_cits() Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-14 14:06:11 +03:00
struct config_group *wwn_default_groups[2];
struct config_group fabric_stat_group;
};
#endif /* TARGET_CORE_BASE_H */