microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/arch/x86/include/asm/perf_event_p4.h

877 строки
26 KiB
C
Исходник Обычный вид История

perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
x86: Fix common misspellings They were generated by 'codespell' and then manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: trivial@kernel.org LKML-Reference: <1300389856-1099-3-git-send-email-lucas.demarchi@profusion.mobi> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-17 22:24:16 +03:00
* Netburst Performance Events (P4, old Xeon)
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
*/
#ifndef PERF_EVENT_P4_H
#define PERF_EVENT_P4_H
#include <linux/cpu.h>
#include <linux/bitops.h>
/*
x86: Fix common misspellings They were generated by 'codespell' and then manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: trivial@kernel.org LKML-Reference: <1300389856-1099-3-git-send-email-lucas.demarchi@profusion.mobi> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-17 22:24:16 +03:00
* NetBurst has performance MSRs shared between
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
* threads if HT is turned on, ie for both logical
* processors (mem: in turn in Atom with HT support
* perf-MSRs are not shared and every thread has its
* own perf-MSRs set)
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
#define ARCH_P4_TOTAL_ESCR (46)
#define ARCH_P4_RESERVED_ESCR (2) /* IQ_ESCR(0,1) not always present */
#define ARCH_P4_MAX_ESCR (ARCH_P4_TOTAL_ESCR - ARCH_P4_RESERVED_ESCR)
#define ARCH_P4_MAX_CCCR (18)
perf, x86: P4 PMU - Fix unflagged overflows handling Don found that P4 PMU reads CCCR register instead of counter itself (in attempt to catch unflagged event) this makes P4 NMI handler to consume all NMIs it observes. So the other NMI users such as kgdb simply have no chance to get NMI on their hands. Side note: at moment there is no way to run nmi-watchdog together with perf tool. This is because both 'perf top' and nmi-watchdog use same event. So while nmi-watchdog reserves one event/counter for own needs there is no room for perf tool left (there is a way to disable nmi-watchdog on boot of course). Ming has tested this patch with the following results | 1. watchdog disabled | | kgdb tests on boot OK | perf works OK | | 2. watchdog enabled, without patch perf-x86-p4-nmi-4 | | kgdb tests on boot hang | | 3. watchdog enabled, without patch perf-x86-p4-nmi-4 and do not run kgdb | tests on boot | | "perf top" partialy works | cpu-cycles no | instructions yes | cache-references no | cache-misses no | branch-instructions no | branch-misses yes | bus-cycles no | | 4. watchdog enabled, with patch perf-x86-p4-nmi-4 applied | | kgdb tests on boot OK | perf does not work, NMI "Dazed and confused" messages show up | Which means we still have problems with p4 box due to 'unknown' nmi happens but at least it should fix kgdb test cases. Reported-by: Jason Wessel <jason.wessel@windriver.com> Reported-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: Don Zickus <dzickus@redhat.com> Acked-by: Lin Ming <ming.m.lin@intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <4D275E7E.3040903@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07 21:42:06 +03:00
#define ARCH_P4_CNTRVAL_BITS (40)
#define ARCH_P4_CNTRVAL_MASK ((1ULL << ARCH_P4_CNTRVAL_BITS) - 1)
perf, x86: P4 PMU: Fix spurious NMI messages Several people have reported spurious unknown NMI messages on some P4 CPUs. This patch fixes it by checking for an overflow (negative counter values) directly, instead of relying on the P4_CCCR_OVF bit. Reported-by: George Spelvin <linux@horizon.com> Reported-by: Meelis Roos <mroos@linux.ee> Reported-by: Don Zickus <dzickus@redhat.com> Reported-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <AANLkTinfuTfCck_FfaOHrDqQZZehtRzkBum4SpFoO=KJ@mail.gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-16 14:08:02 +03:00
#define ARCH_P4_UNFLAGGED_BIT ((1ULL) << (ARCH_P4_CNTRVAL_BITS - 1))
perf, x86: P4 PMU - Fix unflagged overflows handling Don found that P4 PMU reads CCCR register instead of counter itself (in attempt to catch unflagged event) this makes P4 NMI handler to consume all NMIs it observes. So the other NMI users such as kgdb simply have no chance to get NMI on their hands. Side note: at moment there is no way to run nmi-watchdog together with perf tool. This is because both 'perf top' and nmi-watchdog use same event. So while nmi-watchdog reserves one event/counter for own needs there is no room for perf tool left (there is a way to disable nmi-watchdog on boot of course). Ming has tested this patch with the following results | 1. watchdog disabled | | kgdb tests on boot OK | perf works OK | | 2. watchdog enabled, without patch perf-x86-p4-nmi-4 | | kgdb tests on boot hang | | 3. watchdog enabled, without patch perf-x86-p4-nmi-4 and do not run kgdb | tests on boot | | "perf top" partialy works | cpu-cycles no | instructions yes | cache-references no | cache-misses no | branch-instructions no | branch-misses yes | bus-cycles no | | 4. watchdog enabled, with patch perf-x86-p4-nmi-4 applied | | kgdb tests on boot OK | perf does not work, NMI "Dazed and confused" messages show up | Which means we still have problems with p4 box due to 'unknown' nmi happens but at least it should fix kgdb test cases. Reported-by: Jason Wessel <jason.wessel@windriver.com> Reported-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: Don Zickus <dzickus@redhat.com> Acked-by: Lin Ming <ming.m.lin@intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <4D275E7E.3040903@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07 21:42:06 +03:00
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
#define P4_ESCR_EVENT_MASK 0x7e000000U
#define P4_ESCR_EVENT_SHIFT 25
#define P4_ESCR_EVENTMASK_MASK 0x01fffe00U
#define P4_ESCR_EVENTMASK_SHIFT 9
#define P4_ESCR_TAG_MASK 0x000001e0U
#define P4_ESCR_TAG_SHIFT 5
#define P4_ESCR_TAG_ENABLE 0x00000010U
#define P4_ESCR_T0_OS 0x00000008U
#define P4_ESCR_T0_USR 0x00000004U
#define P4_ESCR_T1_OS 0x00000002U
#define P4_ESCR_T1_USR 0x00000001U
#define P4_ESCR_EVENT(v) ((v) << P4_ESCR_EVENT_SHIFT)
#define P4_ESCR_EMASK(v) ((v) << P4_ESCR_EVENTMASK_SHIFT)
#define P4_ESCR_TAG(v) ((v) << P4_ESCR_TAG_SHIFT)
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
#define P4_CCCR_OVF 0x80000000U
#define P4_CCCR_CASCADE 0x40000000U
#define P4_CCCR_OVF_PMI_T0 0x04000000U
#define P4_CCCR_OVF_PMI_T1 0x08000000U
#define P4_CCCR_FORCE_OVF 0x02000000U
#define P4_CCCR_EDGE 0x01000000U
#define P4_CCCR_THRESHOLD_MASK 0x00f00000U
#define P4_CCCR_THRESHOLD_SHIFT 20
#define P4_CCCR_COMPLEMENT 0x00080000U
#define P4_CCCR_COMPARE 0x00040000U
#define P4_CCCR_ESCR_SELECT_MASK 0x0000e000U
#define P4_CCCR_ESCR_SELECT_SHIFT 13
#define P4_CCCR_ENABLE 0x00001000U
#define P4_CCCR_THREAD_SINGLE 0x00010000U
#define P4_CCCR_THREAD_BOTH 0x00020000U
#define P4_CCCR_THREAD_ANY 0x00030000U
perf, x86: Add a key to simplify template lookup in Pentium-4 PMU Currently, we use opcode(Event and Event-Selector) + emask to look up template in p4_templates. But cache events (L1-dcache-load-misses, LLC-load-misses, etc) use the same event(P4_REPLAY_EVENT) to do the counting, ie, they have the same opcode and emask. So we can not use current lookup mechanism to find the template for cache events. This patch introduces a "key", which is the index into p4_templates. The low 12 bits of CCCR are reserved, so we can hide the "key" in the low 12 bits of hwc->config. We extract the key from hwc->config and then quickly find the template. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1268908387.13901.127.camel@minggr.sh.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-18 13:33:07 +03:00
#define P4_CCCR_RESERVED 0x00000fffU
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
#define P4_CCCR_THRESHOLD(v) ((v) << P4_CCCR_THRESHOLD_SHIFT)
#define P4_CCCR_ESEL(v) ((v) << P4_CCCR_ESCR_SELECT_SHIFT)
#define P4_GEN_ESCR_EMASK(class, name, bit) \
class##__##name = ((1 << bit) << P4_ESCR_EVENTMASK_SHIFT)
#define P4_ESCR_EMASK_BIT(class, name) class##__##name
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* config field is 64bit width and consists of
* HT << 63 | ESCR << 32 | CCCR
* where HT is HyperThreading bit (since ESCR
* has it reserved we may use it for own purpose)
*
* note that this is NOT the addresses of respective
* ESCR and CCCR but rather an only packed value should
* be unpacked and written to a proper addresses
*
perf, x86: P4 PMU -- redesign cache events To support cache events we have reserved the low 6 bits in hw_perf_event::config (which is a part of CCCR register configuration actually). These bits represent Replay Event mertic enumerated in enum P4_PEBS_METRIC. The caller should not care about which exact bits should be set and how -- the caller just chooses one P4_PEBS_METRIC entity and puts it into the config. The kernel will track it and set appropriate additional MSR registers (metrics) when needed. The reason for this redesign was the PEBS enable bit, which should not be set until DS (and PEBS sampling) support will be implemented properly. TODO ==== - PEBS sampling (note it's tricky and works with _one_ counter only so for HT machines it will be not that easy to handle both threads) - tracking of PEBS registers state, a user might need to turn PEBS off completely (ie no PEBS enable, no UOP_tag) but some other event may need it, such events clashes and should not run simultaneously, at moment we just don't support such events - eventually export user space bits in separate header which will allow user apps to configure raw events more conveniently. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1278295769.9540.15.camel@minggr.sh.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-07-05 06:09:29 +04:00
* the base idea is to pack as much info as possible
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
*/
#define p4_config_pack_escr(v) (((u64)(v)) << 32)
#define p4_config_pack_cccr(v) (((u64)(v)) & 0xffffffffULL)
#define p4_config_unpack_escr(v) (((u64)(v)) >> 32)
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
#define p4_config_unpack_cccr(v) (((u64)(v)) & 0xffffffffULL)
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
#define p4_config_unpack_emask(v) \
({ \
u32 t = p4_config_unpack_escr((v)); \
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
t = t & P4_ESCR_EVENTMASK_MASK; \
t = t >> P4_ESCR_EVENTMASK_SHIFT; \
t; \
})
#define p4_config_unpack_event(v) \
({ \
u32 t = p4_config_unpack_escr((v)); \
t = t & P4_ESCR_EVENT_MASK; \
t = t >> P4_ESCR_EVENT_SHIFT; \
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
t; \
})
#define P4_CONFIG_HT_SHIFT 63
#define P4_CONFIG_HT (1ULL << P4_CONFIG_HT_SHIFT)
perf, x86: P4 PMU - Introduce event alias feature Instead of hw_nmi_watchdog_set_attr() weak function and appropriate x86_pmu::hw_watchdog_set_attr() call we introduce even alias mechanism which allow us to drop this routines completely and isolate quirks of Netburst architecture inside P4 PMU code only. The main idea remains the same though -- to allow nmi-watchdog and perf top run simultaneously. Note the aliasing mechanism applies to generic PERF_COUNT_HW_CPU_CYCLES event only because arbitrary event (say passed as RAW initially) might have some additional bits set inside ESCR register changing the behaviour of event and we can't guarantee anymore that alias event will give the same result. P.S. Thanks a huge to Don and Steven for for testing and early review. Acked-by: Don Zickus <dzickus@redhat.com> Tested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> CC: Ingo Molnar <mingo@elte.hu> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> CC: Stephane Eranian <eranian@google.com> CC: Lin Ming <ming.m.lin@intel.com> CC: Arnaldo Carvalho de Melo <acme@redhat.com> CC: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/20110708201712.GS23657@sun Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-09 00:17:12 +04:00
/*
* If an event has alias it should be marked
* with a special bit. (Don't forget to check
* P4_PEBS_CONFIG_MASK and related bits on
* modification.)
*/
#define P4_CONFIG_ALIASABLE (1 << 9)
perf, x86, Pentium4: Add RAW events verification Implements verification of - Bits of ESCR EventMask field (meaningful bits in field are hardware predefined and others bits should be set to zero) - INSTR_COMPLETED event (it is available on predefined cpu model only) - Thread shared events (they should be guarded by "perf_event_paranoid" sysctl due to security reason). The side effect of this action is that PERF_COUNT_HW_BUS_CYCLES become a "paranoid" general event. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100825182334.GB14874@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-25 22:23:34 +04:00
/*
* The bits we allow to pass for RAW events
*/
#define P4_CONFIG_MASK_ESCR \
P4_ESCR_EVENT_MASK | \
P4_ESCR_EVENTMASK_MASK | \
P4_ESCR_TAG_MASK | \
P4_ESCR_TAG_ENABLE
#define P4_CONFIG_MASK_CCCR \
P4_CCCR_EDGE | \
P4_CCCR_THRESHOLD_MASK | \
P4_CCCR_COMPLEMENT | \
P4_CCCR_COMPARE | \
P4_CCCR_THREAD_ANY | \
P4_CCCR_RESERVED
/* some dangerous bits are reserved for kernel internals */
#define P4_CONFIG_MASK \
(p4_config_pack_escr(P4_CONFIG_MASK_ESCR)) | \
(p4_config_pack_cccr(P4_CONFIG_MASK_CCCR))
perf, x86: P4 PMU - Introduce event alias feature Instead of hw_nmi_watchdog_set_attr() weak function and appropriate x86_pmu::hw_watchdog_set_attr() call we introduce even alias mechanism which allow us to drop this routines completely and isolate quirks of Netburst architecture inside P4 PMU code only. The main idea remains the same though -- to allow nmi-watchdog and perf top run simultaneously. Note the aliasing mechanism applies to generic PERF_COUNT_HW_CPU_CYCLES event only because arbitrary event (say passed as RAW initially) might have some additional bits set inside ESCR register changing the behaviour of event and we can't guarantee anymore that alias event will give the same result. P.S. Thanks a huge to Don and Steven for for testing and early review. Acked-by: Don Zickus <dzickus@redhat.com> Tested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> CC: Ingo Molnar <mingo@elte.hu> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> CC: Stephane Eranian <eranian@google.com> CC: Lin Ming <ming.m.lin@intel.com> CC: Arnaldo Carvalho de Melo <acme@redhat.com> CC: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/20110708201712.GS23657@sun Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-09 00:17:12 +04:00
/*
* In case of event aliasing we need to preserve some
x86, perf: P4 PMU - Fix typos in comments and style cleanup This patch: - fixes typos in comments and clarifies the text - renames obscure p4_event_alias::original and ::alter members to ::original and ::alternative as appropriate - drops parenthesis from the return of p4_get_alias_event() No functional changes. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Link: http://lkml.kernel.org/r/20110721160625.GX7492@sun Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-21 20:06:25 +04:00
* caller bits, otherwise the mapping won't be complete.
perf, x86: P4 PMU - Introduce event alias feature Instead of hw_nmi_watchdog_set_attr() weak function and appropriate x86_pmu::hw_watchdog_set_attr() call we introduce even alias mechanism which allow us to drop this routines completely and isolate quirks of Netburst architecture inside P4 PMU code only. The main idea remains the same though -- to allow nmi-watchdog and perf top run simultaneously. Note the aliasing mechanism applies to generic PERF_COUNT_HW_CPU_CYCLES event only because arbitrary event (say passed as RAW initially) might have some additional bits set inside ESCR register changing the behaviour of event and we can't guarantee anymore that alias event will give the same result. P.S. Thanks a huge to Don and Steven for for testing and early review. Acked-by: Don Zickus <dzickus@redhat.com> Tested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> CC: Ingo Molnar <mingo@elte.hu> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> CC: Stephane Eranian <eranian@google.com> CC: Lin Ming <ming.m.lin@intel.com> CC: Arnaldo Carvalho de Melo <acme@redhat.com> CC: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/20110708201712.GS23657@sun Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-09 00:17:12 +04:00
*/
#define P4_CONFIG_EVENT_ALIAS_MASK \
(p4_config_pack_escr(P4_CONFIG_MASK_ESCR) | \
p4_config_pack_cccr(P4_CCCR_EDGE | \
P4_CCCR_THRESHOLD_MASK | \
P4_CCCR_COMPLEMENT | \
P4_CCCR_COMPARE))
#define P4_CONFIG_EVENT_ALIAS_IMMUTABLE_BITS \
((P4_CONFIG_HT) | \
p4_config_pack_escr(P4_ESCR_T0_OS | \
P4_ESCR_T0_USR | \
P4_ESCR_T1_OS | \
P4_ESCR_T1_USR) | \
p4_config_pack_cccr(P4_CCCR_OVF | \
P4_CCCR_CASCADE | \
P4_CCCR_FORCE_OVF | \
P4_CCCR_THREAD_ANY | \
P4_CCCR_OVF_PMI_T0 | \
P4_CCCR_OVF_PMI_T1 | \
P4_CONFIG_ALIASABLE))
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
static inline bool p4_is_event_cascaded(u64 config)
{
u32 cccr = p4_config_unpack_cccr(config);
return !!(cccr & P4_CCCR_CASCADE);
}
static inline int p4_ht_config_thread(u64 config)
{
return !!(config & P4_CONFIG_HT);
}
static inline u64 p4_set_ht_bit(u64 config)
{
return config | P4_CONFIG_HT;
}
static inline u64 p4_clear_ht_bit(u64 config)
{
return config & ~P4_CONFIG_HT;
}
static inline int p4_ht_active(void)
{
#ifdef CONFIG_SMP
return smp_num_siblings > 1;
#endif
return 0;
}
static inline int p4_ht_thread(int cpu)
{
#ifdef CONFIG_SMP
if (smp_num_siblings == 2)
return cpu != cpumask_first(__get_cpu_var(cpu_sibling_map));
#endif
return 0;
}
static inline int p4_should_swap_ts(u64 config, int cpu)
{
return p4_ht_config_thread(config) ^ p4_ht_thread(cpu);
}
static inline u32 p4_default_cccr_conf(int cpu)
{
/*
* Note that P4_CCCR_THREAD_ANY is "required" on
* non-HT machines (on HT machines we count TS events
* regardless the state of second logical processor
*/
u32 cccr = P4_CCCR_THREAD_ANY;
if (!p4_ht_thread(cpu))
cccr |= P4_CCCR_OVF_PMI_T0;
else
cccr |= P4_CCCR_OVF_PMI_T1;
return cccr;
}
static inline u32 p4_default_escr_conf(int cpu, int exclude_os, int exclude_usr)
{
u32 escr = 0;
if (!p4_ht_thread(cpu)) {
if (!exclude_os)
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
escr |= P4_ESCR_T0_OS;
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
if (!exclude_usr)
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
escr |= P4_ESCR_T0_USR;
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
} else {
if (!exclude_os)
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
escr |= P4_ESCR_T1_OS;
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
if (!exclude_usr)
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
escr |= P4_ESCR_T1_USR;
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
}
return escr;
}
perf, x86: P4 PMU -- redesign cache events To support cache events we have reserved the low 6 bits in hw_perf_event::config (which is a part of CCCR register configuration actually). These bits represent Replay Event mertic enumerated in enum P4_PEBS_METRIC. The caller should not care about which exact bits should be set and how -- the caller just chooses one P4_PEBS_METRIC entity and puts it into the config. The kernel will track it and set appropriate additional MSR registers (metrics) when needed. The reason for this redesign was the PEBS enable bit, which should not be set until DS (and PEBS sampling) support will be implemented properly. TODO ==== - PEBS sampling (note it's tricky and works with _one_ counter only so for HT machines it will be not that easy to handle both threads) - tracking of PEBS registers state, a user might need to turn PEBS off completely (ie no PEBS enable, no UOP_tag) but some other event may need it, such events clashes and should not run simultaneously, at moment we just don't support such events - eventually export user space bits in separate header which will allow user apps to configure raw events more conveniently. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1278295769.9540.15.camel@minggr.sh.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-07-05 06:09:29 +04:00
/*
* This are the events which should be used in "Event Select"
* field of ESCR register, they are like unique keys which allow
* the kernel to determinate which CCCR and COUNTER should be
* used to track an event
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
enum P4_EVENTS {
P4_EVENT_TC_DELIVER_MODE,
P4_EVENT_BPU_FETCH_REQUEST,
P4_EVENT_ITLB_REFERENCE,
P4_EVENT_MEMORY_CANCEL,
P4_EVENT_MEMORY_COMPLETE,
P4_EVENT_LOAD_PORT_REPLAY,
P4_EVENT_STORE_PORT_REPLAY,
P4_EVENT_MOB_LOAD_REPLAY,
P4_EVENT_PAGE_WALK_TYPE,
P4_EVENT_BSQ_CACHE_REFERENCE,
P4_EVENT_IOQ_ALLOCATION,
P4_EVENT_IOQ_ACTIVE_ENTRIES,
P4_EVENT_FSB_DATA_ACTIVITY,
P4_EVENT_BSQ_ALLOCATION,
P4_EVENT_BSQ_ACTIVE_ENTRIES,
P4_EVENT_SSE_INPUT_ASSIST,
P4_EVENT_PACKED_SP_UOP,
P4_EVENT_PACKED_DP_UOP,
P4_EVENT_SCALAR_SP_UOP,
P4_EVENT_SCALAR_DP_UOP,
P4_EVENT_64BIT_MMX_UOP,
P4_EVENT_128BIT_MMX_UOP,
P4_EVENT_X87_FP_UOP,
P4_EVENT_TC_MISC,
P4_EVENT_GLOBAL_POWER_EVENTS,
P4_EVENT_TC_MS_XFER,
P4_EVENT_UOP_QUEUE_WRITES,
P4_EVENT_RETIRED_MISPRED_BRANCH_TYPE,
P4_EVENT_RETIRED_BRANCH_TYPE,
P4_EVENT_RESOURCE_STALL,
P4_EVENT_WC_BUFFER,
P4_EVENT_B2B_CYCLES,
P4_EVENT_BNR,
P4_EVENT_SNOOP,
P4_EVENT_RESPONSE,
P4_EVENT_FRONT_END_EVENT,
P4_EVENT_EXECUTION_EVENT,
P4_EVENT_REPLAY_EVENT,
P4_EVENT_INSTR_RETIRED,
P4_EVENT_UOPS_RETIRED,
P4_EVENT_UOP_TYPE,
P4_EVENT_BRANCH_RETIRED,
P4_EVENT_MISPRED_BRANCH_RETIRED,
P4_EVENT_X87_ASSIST,
P4_EVENT_MACHINE_CLEAR,
P4_EVENT_INSTR_COMPLETED,
};
#define P4_OPCODE(event) event##_OPCODE
#define P4_OPCODE_ESEL(opcode) ((opcode & 0x00ff) >> 0)
#define P4_OPCODE_EVNT(opcode) ((opcode & 0xff00) >> 8)
#define P4_OPCODE_PACK(event, sel) (((event) << 8) | sel)
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* Comments below the event represent ESCR restriction
* for this event and counter index per ESCR
*
* MSR_P4_IQ_ESCR0 and MSR_P4_IQ_ESCR1 are available only on early
* processor builds (family 0FH, models 01H-02H). These MSRs
* are not available on later versions, so that we don't use
* them completely
*
* Also note that CCCR1 do not have P4_CCCR_ENABLE bit properly
* working so that we should not use this CCCR and respective
* counter as result
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
enum P4_EVENT_OPCODES {
P4_OPCODE(P4_EVENT_TC_DELIVER_MODE) = P4_OPCODE_PACK(0x01, 0x01),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_TC_ESCR0: 4, 5
* MSR_P4_TC_ESCR1: 6, 7
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_BPU_FETCH_REQUEST) = P4_OPCODE_PACK(0x03, 0x00),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_BPU_ESCR0: 0, 1
* MSR_P4_BPU_ESCR1: 2, 3
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_ITLB_REFERENCE) = P4_OPCODE_PACK(0x18, 0x03),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_ITLB_ESCR0: 0, 1
* MSR_P4_ITLB_ESCR1: 2, 3
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_MEMORY_CANCEL) = P4_OPCODE_PACK(0x02, 0x05),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_DAC_ESCR0: 8, 9
* MSR_P4_DAC_ESCR1: 10, 11
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_MEMORY_COMPLETE) = P4_OPCODE_PACK(0x08, 0x02),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_SAAT_ESCR0: 8, 9
* MSR_P4_SAAT_ESCR1: 10, 11
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_LOAD_PORT_REPLAY) = P4_OPCODE_PACK(0x04, 0x02),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_SAAT_ESCR0: 8, 9
* MSR_P4_SAAT_ESCR1: 10, 11
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_STORE_PORT_REPLAY) = P4_OPCODE_PACK(0x05, 0x02),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_SAAT_ESCR0: 8, 9
* MSR_P4_SAAT_ESCR1: 10, 11
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_MOB_LOAD_REPLAY) = P4_OPCODE_PACK(0x03, 0x02),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_MOB_ESCR0: 0, 1
* MSR_P4_MOB_ESCR1: 2, 3
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_PAGE_WALK_TYPE) = P4_OPCODE_PACK(0x01, 0x04),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_PMH_ESCR0: 0, 1
* MSR_P4_PMH_ESCR1: 2, 3
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_BSQ_CACHE_REFERENCE) = P4_OPCODE_PACK(0x0c, 0x07),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_BSU_ESCR0: 0, 1
* MSR_P4_BSU_ESCR1: 2, 3
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_IOQ_ALLOCATION) = P4_OPCODE_PACK(0x03, 0x06),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_FSB_ESCR0: 0, 1
* MSR_P4_FSB_ESCR1: 2, 3
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_IOQ_ACTIVE_ENTRIES) = P4_OPCODE_PACK(0x1a, 0x06),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_FSB_ESCR1: 2, 3
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_FSB_DATA_ACTIVITY) = P4_OPCODE_PACK(0x17, 0x06),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_FSB_ESCR0: 0, 1
* MSR_P4_FSB_ESCR1: 2, 3
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_BSQ_ALLOCATION) = P4_OPCODE_PACK(0x05, 0x07),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_BSU_ESCR0: 0, 1
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_BSQ_ACTIVE_ENTRIES) = P4_OPCODE_PACK(0x06, 0x07),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
x86, perf: Fix comments in Pentium-4 PMU definitions Reported-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1268705556.3379.8.camel@minggr.sh.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-16 05:12:36 +03:00
* NOTE: no ESCR name in docs, it's guessed
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
* MSR_P4_BSU_ESCR1: 2, 3
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_SSE_INPUT_ASSIST) = P4_OPCODE_PACK(0x34, 0x01),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
perf, x86: Enable not tagged retired instruction counting on P4s This should turn on instruction counting on P4s, which was missing in the first version of the new PMU driver. It's inaccurate for now, we still need dependant event to tag mops before we can count them precisely. The result is that the number of instruction may be lifted up. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1268629102.3355.11.camel@minggr.sh.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-15 07:58:22 +03:00
* MSR_P4_FIRM_ESCR0: 8, 9
* MSR_P4_FIRM_ESCR1: 10, 11
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_PACKED_SP_UOP) = P4_OPCODE_PACK(0x08, 0x01),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_FIRM_ESCR0: 8, 9
* MSR_P4_FIRM_ESCR1: 10, 11
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_PACKED_DP_UOP) = P4_OPCODE_PACK(0x0c, 0x01),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_FIRM_ESCR0: 8, 9
* MSR_P4_FIRM_ESCR1: 10, 11
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_SCALAR_SP_UOP) = P4_OPCODE_PACK(0x0a, 0x01),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_FIRM_ESCR0: 8, 9
* MSR_P4_FIRM_ESCR1: 10, 11
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_SCALAR_DP_UOP) = P4_OPCODE_PACK(0x0e, 0x01),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_FIRM_ESCR0: 8, 9
* MSR_P4_FIRM_ESCR1: 10, 11
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_64BIT_MMX_UOP) = P4_OPCODE_PACK(0x02, 0x01),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_FIRM_ESCR0: 8, 9
* MSR_P4_FIRM_ESCR1: 10, 11
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_128BIT_MMX_UOP) = P4_OPCODE_PACK(0x1a, 0x01),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_FIRM_ESCR0: 8, 9
* MSR_P4_FIRM_ESCR1: 10, 11
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_X87_FP_UOP) = P4_OPCODE_PACK(0x04, 0x01),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_FIRM_ESCR0: 8, 9
* MSR_P4_FIRM_ESCR1: 10, 11
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_TC_MISC) = P4_OPCODE_PACK(0x06, 0x01),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_TC_ESCR0: 4, 5
* MSR_P4_TC_ESCR1: 6, 7
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_GLOBAL_POWER_EVENTS) = P4_OPCODE_PACK(0x13, 0x06),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_FSB_ESCR0: 0, 1
* MSR_P4_FSB_ESCR1: 2, 3
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_TC_MS_XFER) = P4_OPCODE_PACK(0x05, 0x00),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_MS_ESCR0: 4, 5
* MSR_P4_MS_ESCR1: 6, 7
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_UOP_QUEUE_WRITES) = P4_OPCODE_PACK(0x09, 0x00),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_MS_ESCR0: 4, 5
* MSR_P4_MS_ESCR1: 6, 7
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_RETIRED_MISPRED_BRANCH_TYPE) = P4_OPCODE_PACK(0x05, 0x02),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_TBPU_ESCR0: 4, 5
x86, perf: Fix few cosmetic dabs for P4 pmu (comments and constantify) - A few ESCR have escaped fixing at previous attempt. - p4_escr_map is read only, make it const. Nothing serious. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Lin Ming <ming.m.lin@intel.com> LKML-Reference: <20100318211256.GH5062@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-19 00:12:56 +03:00
* MSR_P4_TBPU_ESCR1: 6, 7
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_RETIRED_BRANCH_TYPE) = P4_OPCODE_PACK(0x04, 0x02),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_TBPU_ESCR0: 4, 5
x86, perf: Fix few cosmetic dabs for P4 pmu (comments and constantify) - A few ESCR have escaped fixing at previous attempt. - p4_escr_map is read only, make it const. Nothing serious. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Lin Ming <ming.m.lin@intel.com> LKML-Reference: <20100318211256.GH5062@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-19 00:12:56 +03:00
* MSR_P4_TBPU_ESCR1: 6, 7
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_RESOURCE_STALL) = P4_OPCODE_PACK(0x01, 0x01),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_ALF_ESCR0: 12, 13, 16
* MSR_P4_ALF_ESCR1: 14, 15, 17
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_WC_BUFFER) = P4_OPCODE_PACK(0x05, 0x05),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_DAC_ESCR0: 8, 9
* MSR_P4_DAC_ESCR1: 10, 11
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_B2B_CYCLES) = P4_OPCODE_PACK(0x16, 0x03),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_FSB_ESCR0: 0, 1
* MSR_P4_FSB_ESCR1: 2, 3
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_BNR) = P4_OPCODE_PACK(0x08, 0x03),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_FSB_ESCR0: 0, 1
* MSR_P4_FSB_ESCR1: 2, 3
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_SNOOP) = P4_OPCODE_PACK(0x06, 0x03),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_FSB_ESCR0: 0, 1
* MSR_P4_FSB_ESCR1: 2, 3
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_RESPONSE) = P4_OPCODE_PACK(0x04, 0x03),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_FSB_ESCR0: 0, 1
* MSR_P4_FSB_ESCR1: 2, 3
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_FRONT_END_EVENT) = P4_OPCODE_PACK(0x08, 0x05),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_CRU_ESCR2: 12, 13, 16
* MSR_P4_CRU_ESCR3: 14, 15, 17
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_EXECUTION_EVENT) = P4_OPCODE_PACK(0x0c, 0x05),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_CRU_ESCR2: 12, 13, 16
* MSR_P4_CRU_ESCR3: 14, 15, 17
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_REPLAY_EVENT) = P4_OPCODE_PACK(0x09, 0x05),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_CRU_ESCR2: 12, 13, 16
* MSR_P4_CRU_ESCR3: 14, 15, 17
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_INSTR_RETIRED) = P4_OPCODE_PACK(0x02, 0x04),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
perf, x86: Enable not tagged retired instruction counting on P4s This should turn on instruction counting on P4s, which was missing in the first version of the new PMU driver. It's inaccurate for now, we still need dependant event to tag mops before we can count them precisely. The result is that the number of instruction may be lifted up. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1268629102.3355.11.camel@minggr.sh.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-15 07:58:22 +03:00
* MSR_P4_CRU_ESCR0: 12, 13, 16
* MSR_P4_CRU_ESCR1: 14, 15, 17
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_UOPS_RETIRED) = P4_OPCODE_PACK(0x01, 0x04),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
x86, perf: Fix comments in Pentium-4 PMU definitions Reported-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1268705556.3379.8.camel@minggr.sh.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-16 05:12:36 +03:00
* MSR_P4_CRU_ESCR0: 12, 13, 16
* MSR_P4_CRU_ESCR1: 14, 15, 17
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_UOP_TYPE) = P4_OPCODE_PACK(0x02, 0x02),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_RAT_ESCR0: 12, 13, 16
* MSR_P4_RAT_ESCR1: 14, 15, 17
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_BRANCH_RETIRED) = P4_OPCODE_PACK(0x06, 0x05),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_CRU_ESCR2: 12, 13, 16
* MSR_P4_CRU_ESCR3: 14, 15, 17
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_MISPRED_BRANCH_RETIRED) = P4_OPCODE_PACK(0x03, 0x04),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_CRU_ESCR0: 12, 13, 16
* MSR_P4_CRU_ESCR1: 14, 15, 17
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_X87_ASSIST) = P4_OPCODE_PACK(0x03, 0x05),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_CRU_ESCR2: 12, 13, 16
* MSR_P4_CRU_ESCR3: 14, 15, 17
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_MACHINE_CLEAR) = P4_OPCODE_PACK(0x02, 0x05),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_CRU_ESCR2: 12, 13, 16
* MSR_P4_CRU_ESCR3: 14, 15, 17
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_OPCODE(P4_EVENT_INSTR_COMPLETED) = P4_OPCODE_PACK(0x07, 0x04),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
* MSR_P4_CRU_ESCR0: 12, 13, 16
* MSR_P4_CRU_ESCR1: 14, 15, 17
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
};
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
/*
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
* a caller should use P4_ESCR_EMASK_NAME helper to
* pick the EventMask needed, for example
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
*
perf, x86: P4 PMU -- redesign cache events To support cache events we have reserved the low 6 bits in hw_perf_event::config (which is a part of CCCR register configuration actually). These bits represent Replay Event mertic enumerated in enum P4_PEBS_METRIC. The caller should not care about which exact bits should be set and how -- the caller just chooses one P4_PEBS_METRIC entity and puts it into the config. The kernel will track it and set appropriate additional MSR registers (metrics) when needed. The reason for this redesign was the PEBS enable bit, which should not be set until DS (and PEBS sampling) support will be implemented properly. TODO ==== - PEBS sampling (note it's tricky and works with _one_ counter only so for HT machines it will be not that easy to handle both threads) - tracking of PEBS registers state, a user might need to turn PEBS off completely (ie no PEBS enable, no UOP_tag) but some other event may need it, such events clashes and should not run simultaneously, at moment we just don't support such events - eventually export user space bits in separate header which will allow user apps to configure raw events more conveniently. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1278295769.9540.15.camel@minggr.sh.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-07-05 06:09:29 +04:00
* P4_ESCR_EMASK_BIT(P4_EVENT_TC_DELIVER_MODE, DD)
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
*/
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
enum P4_ESCR_EMASKS {
P4_GEN_ESCR_EMASK(P4_EVENT_TC_DELIVER_MODE, DD, 0),
P4_GEN_ESCR_EMASK(P4_EVENT_TC_DELIVER_MODE, DB, 1),
P4_GEN_ESCR_EMASK(P4_EVENT_TC_DELIVER_MODE, DI, 2),
P4_GEN_ESCR_EMASK(P4_EVENT_TC_DELIVER_MODE, BD, 3),
P4_GEN_ESCR_EMASK(P4_EVENT_TC_DELIVER_MODE, BB, 4),
P4_GEN_ESCR_EMASK(P4_EVENT_TC_DELIVER_MODE, BI, 5),
P4_GEN_ESCR_EMASK(P4_EVENT_TC_DELIVER_MODE, ID, 6),
P4_GEN_ESCR_EMASK(P4_EVENT_BPU_FETCH_REQUEST, TCMISS, 0),
P4_GEN_ESCR_EMASK(P4_EVENT_ITLB_REFERENCE, HIT, 0),
P4_GEN_ESCR_EMASK(P4_EVENT_ITLB_REFERENCE, MISS, 1),
P4_GEN_ESCR_EMASK(P4_EVENT_ITLB_REFERENCE, HIT_UK, 2),
P4_GEN_ESCR_EMASK(P4_EVENT_MEMORY_CANCEL, ST_RB_FULL, 2),
P4_GEN_ESCR_EMASK(P4_EVENT_MEMORY_CANCEL, 64K_CONF, 3),
P4_GEN_ESCR_EMASK(P4_EVENT_MEMORY_COMPLETE, LSC, 0),
P4_GEN_ESCR_EMASK(P4_EVENT_MEMORY_COMPLETE, SSC, 1),
P4_GEN_ESCR_EMASK(P4_EVENT_LOAD_PORT_REPLAY, SPLIT_LD, 1),
P4_GEN_ESCR_EMASK(P4_EVENT_STORE_PORT_REPLAY, SPLIT_ST, 1),
P4_GEN_ESCR_EMASK(P4_EVENT_MOB_LOAD_REPLAY, NO_STA, 1),
P4_GEN_ESCR_EMASK(P4_EVENT_MOB_LOAD_REPLAY, NO_STD, 3),
P4_GEN_ESCR_EMASK(P4_EVENT_MOB_LOAD_REPLAY, PARTIAL_DATA, 4),
P4_GEN_ESCR_EMASK(P4_EVENT_MOB_LOAD_REPLAY, UNALGN_ADDR, 5),
P4_GEN_ESCR_EMASK(P4_EVENT_PAGE_WALK_TYPE, DTMISS, 0),
P4_GEN_ESCR_EMASK(P4_EVENT_PAGE_WALK_TYPE, ITMISS, 1),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_CACHE_REFERENCE, RD_2ndL_HITS, 0),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_CACHE_REFERENCE, RD_2ndL_HITE, 1),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_CACHE_REFERENCE, RD_2ndL_HITM, 2),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_CACHE_REFERENCE, RD_3rdL_HITS, 3),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_CACHE_REFERENCE, RD_3rdL_HITE, 4),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_CACHE_REFERENCE, RD_3rdL_HITM, 5),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_CACHE_REFERENCE, RD_2ndL_MISS, 8),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_CACHE_REFERENCE, RD_3rdL_MISS, 9),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_CACHE_REFERENCE, WR_2ndL_MISS, 10),
P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ALLOCATION, DEFAULT, 0),
P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ALLOCATION, ALL_READ, 5),
P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ALLOCATION, ALL_WRITE, 6),
P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ALLOCATION, MEM_UC, 7),
P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ALLOCATION, MEM_WC, 8),
P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ALLOCATION, MEM_WT, 9),
P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ALLOCATION, MEM_WP, 10),
P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ALLOCATION, MEM_WB, 11),
P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ALLOCATION, OWN, 13),
P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ALLOCATION, OTHER, 14),
P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ALLOCATION, PREFETCH, 15),
P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ACTIVE_ENTRIES, DEFAULT, 0),
P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ACTIVE_ENTRIES, ALL_READ, 5),
P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ACTIVE_ENTRIES, ALL_WRITE, 6),
P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ACTIVE_ENTRIES, MEM_UC, 7),
P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ACTIVE_ENTRIES, MEM_WC, 8),
P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ACTIVE_ENTRIES, MEM_WT, 9),
P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ACTIVE_ENTRIES, MEM_WP, 10),
P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ACTIVE_ENTRIES, MEM_WB, 11),
P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ACTIVE_ENTRIES, OWN, 13),
P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ACTIVE_ENTRIES, OTHER, 14),
P4_GEN_ESCR_EMASK(P4_EVENT_IOQ_ACTIVE_ENTRIES, PREFETCH, 15),
P4_GEN_ESCR_EMASK(P4_EVENT_FSB_DATA_ACTIVITY, DRDY_DRV, 0),
P4_GEN_ESCR_EMASK(P4_EVENT_FSB_DATA_ACTIVITY, DRDY_OWN, 1),
P4_GEN_ESCR_EMASK(P4_EVENT_FSB_DATA_ACTIVITY, DRDY_OTHER, 2),
P4_GEN_ESCR_EMASK(P4_EVENT_FSB_DATA_ACTIVITY, DBSY_DRV, 3),
P4_GEN_ESCR_EMASK(P4_EVENT_FSB_DATA_ACTIVITY, DBSY_OWN, 4),
P4_GEN_ESCR_EMASK(P4_EVENT_FSB_DATA_ACTIVITY, DBSY_OTHER, 5),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ALLOCATION, REQ_TYPE0, 0),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ALLOCATION, REQ_TYPE1, 1),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ALLOCATION, REQ_LEN0, 2),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ALLOCATION, REQ_LEN1, 3),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ALLOCATION, REQ_IO_TYPE, 5),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ALLOCATION, REQ_LOCK_TYPE, 6),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ALLOCATION, REQ_CACHE_TYPE, 7),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ALLOCATION, REQ_SPLIT_TYPE, 8),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ALLOCATION, REQ_DEM_TYPE, 9),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ALLOCATION, REQ_ORD_TYPE, 10),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ALLOCATION, MEM_TYPE0, 11),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ALLOCATION, MEM_TYPE1, 12),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ALLOCATION, MEM_TYPE2, 13),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ACTIVE_ENTRIES, REQ_TYPE0, 0),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ACTIVE_ENTRIES, REQ_TYPE1, 1),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ACTIVE_ENTRIES, REQ_LEN0, 2),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ACTIVE_ENTRIES, REQ_LEN1, 3),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ACTIVE_ENTRIES, REQ_IO_TYPE, 5),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ACTIVE_ENTRIES, REQ_LOCK_TYPE, 6),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ACTIVE_ENTRIES, REQ_CACHE_TYPE, 7),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ACTIVE_ENTRIES, REQ_SPLIT_TYPE, 8),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ACTIVE_ENTRIES, REQ_DEM_TYPE, 9),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ACTIVE_ENTRIES, REQ_ORD_TYPE, 10),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ACTIVE_ENTRIES, MEM_TYPE0, 11),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ACTIVE_ENTRIES, MEM_TYPE1, 12),
P4_GEN_ESCR_EMASK(P4_EVENT_BSQ_ACTIVE_ENTRIES, MEM_TYPE2, 13),
P4_GEN_ESCR_EMASK(P4_EVENT_SSE_INPUT_ASSIST, ALL, 15),
P4_GEN_ESCR_EMASK(P4_EVENT_PACKED_SP_UOP, ALL, 15),
P4_GEN_ESCR_EMASK(P4_EVENT_PACKED_DP_UOP, ALL, 15),
P4_GEN_ESCR_EMASK(P4_EVENT_SCALAR_SP_UOP, ALL, 15),
P4_GEN_ESCR_EMASK(P4_EVENT_SCALAR_DP_UOP, ALL, 15),
P4_GEN_ESCR_EMASK(P4_EVENT_64BIT_MMX_UOP, ALL, 15),
P4_GEN_ESCR_EMASK(P4_EVENT_128BIT_MMX_UOP, ALL, 15),
P4_GEN_ESCR_EMASK(P4_EVENT_X87_FP_UOP, ALL, 15),
P4_GEN_ESCR_EMASK(P4_EVENT_TC_MISC, FLUSH, 4),
P4_GEN_ESCR_EMASK(P4_EVENT_GLOBAL_POWER_EVENTS, RUNNING, 0),
P4_GEN_ESCR_EMASK(P4_EVENT_TC_MS_XFER, CISC, 0),
P4_GEN_ESCR_EMASK(P4_EVENT_UOP_QUEUE_WRITES, FROM_TC_BUILD, 0),
P4_GEN_ESCR_EMASK(P4_EVENT_UOP_QUEUE_WRITES, FROM_TC_DELIVER, 1),
P4_GEN_ESCR_EMASK(P4_EVENT_UOP_QUEUE_WRITES, FROM_ROM, 2),
P4_GEN_ESCR_EMASK(P4_EVENT_RETIRED_MISPRED_BRANCH_TYPE, CONDITIONAL, 1),
P4_GEN_ESCR_EMASK(P4_EVENT_RETIRED_MISPRED_BRANCH_TYPE, CALL, 2),
P4_GEN_ESCR_EMASK(P4_EVENT_RETIRED_MISPRED_BRANCH_TYPE, RETURN, 3),
P4_GEN_ESCR_EMASK(P4_EVENT_RETIRED_MISPRED_BRANCH_TYPE, INDIRECT, 4),
P4_GEN_ESCR_EMASK(P4_EVENT_RETIRED_BRANCH_TYPE, CONDITIONAL, 1),
P4_GEN_ESCR_EMASK(P4_EVENT_RETIRED_BRANCH_TYPE, CALL, 2),
P4_GEN_ESCR_EMASK(P4_EVENT_RETIRED_BRANCH_TYPE, RETURN, 3),
P4_GEN_ESCR_EMASK(P4_EVENT_RETIRED_BRANCH_TYPE, INDIRECT, 4),
P4_GEN_ESCR_EMASK(P4_EVENT_RESOURCE_STALL, SBFULL, 5),
P4_GEN_ESCR_EMASK(P4_EVENT_WC_BUFFER, WCB_EVICTS, 0),
P4_GEN_ESCR_EMASK(P4_EVENT_WC_BUFFER, WCB_FULL_EVICTS, 1),
P4_GEN_ESCR_EMASK(P4_EVENT_FRONT_END_EVENT, NBOGUS, 0),
P4_GEN_ESCR_EMASK(P4_EVENT_FRONT_END_EVENT, BOGUS, 1),
P4_GEN_ESCR_EMASK(P4_EVENT_EXECUTION_EVENT, NBOGUS0, 0),
P4_GEN_ESCR_EMASK(P4_EVENT_EXECUTION_EVENT, NBOGUS1, 1),
P4_GEN_ESCR_EMASK(P4_EVENT_EXECUTION_EVENT, NBOGUS2, 2),
P4_GEN_ESCR_EMASK(P4_EVENT_EXECUTION_EVENT, NBOGUS3, 3),
P4_GEN_ESCR_EMASK(P4_EVENT_EXECUTION_EVENT, BOGUS0, 4),
P4_GEN_ESCR_EMASK(P4_EVENT_EXECUTION_EVENT, BOGUS1, 5),
P4_GEN_ESCR_EMASK(P4_EVENT_EXECUTION_EVENT, BOGUS2, 6),
P4_GEN_ESCR_EMASK(P4_EVENT_EXECUTION_EVENT, BOGUS3, 7),
P4_GEN_ESCR_EMASK(P4_EVENT_REPLAY_EVENT, NBOGUS, 0),
P4_GEN_ESCR_EMASK(P4_EVENT_REPLAY_EVENT, BOGUS, 1),
P4_GEN_ESCR_EMASK(P4_EVENT_INSTR_RETIRED, NBOGUSNTAG, 0),
P4_GEN_ESCR_EMASK(P4_EVENT_INSTR_RETIRED, NBOGUSTAG, 1),
P4_GEN_ESCR_EMASK(P4_EVENT_INSTR_RETIRED, BOGUSNTAG, 2),
P4_GEN_ESCR_EMASK(P4_EVENT_INSTR_RETIRED, BOGUSTAG, 3),
P4_GEN_ESCR_EMASK(P4_EVENT_UOPS_RETIRED, NBOGUS, 0),
P4_GEN_ESCR_EMASK(P4_EVENT_UOPS_RETIRED, BOGUS, 1),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_GEN_ESCR_EMASK(P4_EVENT_UOP_TYPE, TAGLOADS, 1),
P4_GEN_ESCR_EMASK(P4_EVENT_UOP_TYPE, TAGSTORES, 2),
P4_GEN_ESCR_EMASK(P4_EVENT_BRANCH_RETIRED, MMNP, 0),
P4_GEN_ESCR_EMASK(P4_EVENT_BRANCH_RETIRED, MMNM, 1),
P4_GEN_ESCR_EMASK(P4_EVENT_BRANCH_RETIRED, MMTP, 2),
P4_GEN_ESCR_EMASK(P4_EVENT_BRANCH_RETIRED, MMTM, 3),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_GEN_ESCR_EMASK(P4_EVENT_MISPRED_BRANCH_RETIRED, NBOGUS, 0),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_GEN_ESCR_EMASK(P4_EVENT_X87_ASSIST, FPSU, 0),
P4_GEN_ESCR_EMASK(P4_EVENT_X87_ASSIST, FPSO, 1),
P4_GEN_ESCR_EMASK(P4_EVENT_X87_ASSIST, POAO, 2),
P4_GEN_ESCR_EMASK(P4_EVENT_X87_ASSIST, POAU, 3),
P4_GEN_ESCR_EMASK(P4_EVENT_X87_ASSIST, PREA, 4),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_GEN_ESCR_EMASK(P4_EVENT_MACHINE_CLEAR, CLEAR, 0),
P4_GEN_ESCR_EMASK(P4_EVENT_MACHINE_CLEAR, MOCLEAR, 1),
P4_GEN_ESCR_EMASK(P4_EVENT_MACHINE_CLEAR, SMCLEAR, 2),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
x86, perf: Add raw events support for the P4 PMU The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 07:09:26 +03:00
P4_GEN_ESCR_EMASK(P4_EVENT_INSTR_COMPLETED, NBOGUS, 0),
P4_GEN_ESCR_EMASK(P4_EVENT_INSTR_COMPLETED, BOGUS, 1),
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
};
perf, x86: P4 PMU -- redesign cache events To support cache events we have reserved the low 6 bits in hw_perf_event::config (which is a part of CCCR register configuration actually). These bits represent Replay Event mertic enumerated in enum P4_PEBS_METRIC. The caller should not care about which exact bits should be set and how -- the caller just chooses one P4_PEBS_METRIC entity and puts it into the config. The kernel will track it and set appropriate additional MSR registers (metrics) when needed. The reason for this redesign was the PEBS enable bit, which should not be set until DS (and PEBS sampling) support will be implemented properly. TODO ==== - PEBS sampling (note it's tricky and works with _one_ counter only so for HT machines it will be not that easy to handle both threads) - tracking of PEBS registers state, a user might need to turn PEBS off completely (ie no PEBS enable, no UOP_tag) but some other event may need it, such events clashes and should not run simultaneously, at moment we just don't support such events - eventually export user space bits in separate header which will allow user apps to configure raw events more conveniently. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1278295769.9540.15.camel@minggr.sh.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-07-05 06:09:29 +04:00
/*
* Note we have UOP and PEBS bits reserved for now
* just in case if we will need them once
*/
#define P4_PEBS_CONFIG_ENABLE (1 << 7)
#define P4_PEBS_CONFIG_UOP_TAG (1 << 8)
#define P4_PEBS_CONFIG_METRIC_MASK 0x3f
#define P4_PEBS_CONFIG_MASK 0xff
/*
* mem: Only counters MSR_IQ_COUNTER4 (16) and
* MSR_IQ_COUNTER5 (17) are allowed for PEBS sampling
*/
#define P4_PEBS_ENABLE 0x02000000U
#define P4_PEBS_ENABLE_UOP_TAG 0x01000000U
#define p4_config_unpack_metric(v) (((u64)(v)) & P4_PEBS_CONFIG_METRIC_MASK)
#define p4_config_unpack_pebs(v) (((u64)(v)) & P4_PEBS_CONFIG_MASK)
#define p4_config_pebs_has(v, mask) (p4_config_unpack_pebs(v) & (mask))
enum P4_PEBS_METRIC {
P4_PEBS_METRIC__none,
P4_PEBS_METRIC__1stl_cache_load_miss_retired,
P4_PEBS_METRIC__2ndl_cache_load_miss_retired,
P4_PEBS_METRIC__dtlb_load_miss_retired,
P4_PEBS_METRIC__dtlb_store_miss_retired,
P4_PEBS_METRIC__dtlb_all_miss_retired,
P4_PEBS_METRIC__tagged_mispred_branch,
P4_PEBS_METRIC__mob_load_replay_retired,
P4_PEBS_METRIC__split_load_retired,
P4_PEBS_METRIC__split_store_retired,
P4_PEBS_METRIC__max
perf, x86: Add cache events for the Pentium-4 PMU Move the HT bit setting code from p4_pmu_event_map to p4_hw_config. So the cache events can get HT bit set correctly. Tested on my P4 desktop, below 6 cache events work: L1-dcache-load-misses LLC-load-misses dTLB-load-misses dTLB-store-misses iTLB-loads iTLB-load-misses Signed-off-by: Lin Ming <ming.m.lin@intel.com> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1268908392.13901.128.camel@minggr.sh.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-18 13:33:12 +03:00
};
perf, x86: P4 PMU - describe config format Add description of .config in a sake of RAW events. At least this should bring some light to those who will be reading this code. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Reviewed-by: Stephane Eranian <eranian@google.com> Cc: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-26 14:32:09 +03:00
/*
* Notes on internal configuration of ESCR+CCCR tuples
*
* Since P4 has quite the different architecture of
* performance registers in compare with "architectural"
* once and we have on 64 bits to keep configuration
* of performance event, the following trick is used.
*
* 1) Since both ESCR and CCCR registers have only low
* 32 bits valuable, we pack them into a single 64 bit
* configuration. Low 32 bits of such config correspond
* to low 32 bits of CCCR register and high 32 bits
* correspond to low 32 bits of ESCR register.
*
* 2) The meaning of every bit of such config field can
* be found in Intel SDM but it should be noted that
* we "borrow" some reserved bits for own usage and
* clean them or set to a proper value when we do
* a real write to hardware registers.
*
* 3) The format of bits of config is the following
* and should be either 0 or set to some predefined
* values:
*
* Low 32 bits
* -----------
* 0-6: P4_PEBS_METRIC enum
* 7-11: reserved
* 12: reserved (Enable)
* 13-15: reserved (ESCR select)
* 16-17: Active Thread
* 18: Compare
* 19: Complement
* 20-23: Threshold
* 24: Edge
* 25: reserved (FORCE_OVF)
* 26: reserved (OVF_PMI_T0)
* 27: reserved (OVF_PMI_T1)
* 28-29: reserved
* 30: reserved (Cascade)
* 31: reserved (OVF)
*
* High 32 bits
* ------------
* 0: reserved (T1_USR)
* 1: reserved (T1_OS)
* 2: reserved (T0_USR)
* 3: reserved (T0_OS)
* 4: Tag Enable
* 5-8: Tag Value
* 9-24: Event Mask (may use P4_ESCR_EMASK_BIT helper)
* 25-30: enum P4_EVENTS
* 31: reserved (HT thread)
*/
perf, x86: Implement initial P4 PMU driver The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11 19:54:39 +03:00
#endif /* PERF_EVENT_P4_H */
perf, x86: P4 PMU -- redesign cache events To support cache events we have reserved the low 6 bits in hw_perf_event::config (which is a part of CCCR register configuration actually). These bits represent Replay Event mertic enumerated in enum P4_PEBS_METRIC. The caller should not care about which exact bits should be set and how -- the caller just chooses one P4_PEBS_METRIC entity and puts it into the config. The kernel will track it and set appropriate additional MSR registers (metrics) when needed. The reason for this redesign was the PEBS enable bit, which should not be set until DS (and PEBS sampling) support will be implemented properly. TODO ==== - PEBS sampling (note it's tricky and works with _one_ counter only so for HT machines it will be not that easy to handle both threads) - tracking of PEBS registers state, a user might need to turn PEBS off completely (ie no PEBS enable, no UOP_tag) but some other event may need it, such events clashes and should not run simultaneously, at moment we just don't support such events - eventually export user space bits in separate header which will allow user apps to configure raw events more conveniently. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1278295769.9540.15.camel@minggr.sh.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-07-05 06:09:29 +04:00