WSL2-Linux-Kernel/include/drm/drm_edid.h

413 строки
12 KiB
C
Исходник Обычный вид История

/*
* Copyright © 2007-2008 Intel Corporation
* Jesse Barnes <jesse.barnes@intel.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#ifndef __DRM_EDID_H__
#define __DRM_EDID_H__
#include <linux/types.h>
#define EDID_LENGTH 128
#define DDC_ADDR 0x50
#define DDC_ADDR2 0x52 /* E-DDC 1.2 - where DisplayID can hide */
#define CEA_EXT 0x02
#define VTB_EXT 0x10
#define DI_EXT 0x40
#define LS_EXT 0x50
#define MI_EXT 0x60
#define DISPLAYID_EXT 0x70
struct est_timings {
u8 t1;
u8 t2;
u8 mfg_rsvd;
} __attribute__((packed));
/* 00=16:10, 01=4:3, 10=5:4, 11=16:9 */
#define EDID_TIMING_ASPECT_SHIFT 6
#define EDID_TIMING_ASPECT_MASK (0x3 << EDID_TIMING_ASPECT_SHIFT)
/* need to add 60 */
#define EDID_TIMING_VFREQ_SHIFT 0
#define EDID_TIMING_VFREQ_MASK (0x3f << EDID_TIMING_VFREQ_SHIFT)
struct std_timing {
u8 hsize; /* need to multiply by 8 then add 248 */
u8 vfreq_aspect;
} __attribute__((packed));
#define DRM_EDID_PT_HSYNC_POSITIVE (1 << 1)
#define DRM_EDID_PT_VSYNC_POSITIVE (1 << 2)
#define DRM_EDID_PT_SEPARATE_SYNC (3 << 3)
#define DRM_EDID_PT_STEREO (1 << 5)
#define DRM_EDID_PT_INTERLACED (1 << 7)
/* If detailed data is pixel timing */
struct detailed_pixel_timing {
u8 hactive_lo;
u8 hblank_lo;
u8 hactive_hblank_hi;
u8 vactive_lo;
u8 vblank_lo;
u8 vactive_vblank_hi;
u8 hsync_offset_lo;
u8 hsync_pulse_width_lo;
u8 vsync_offset_pulse_width_lo;
u8 hsync_vsync_offset_pulse_width_hi;
u8 width_mm_lo;
u8 height_mm_lo;
u8 width_height_mm_hi;
u8 hborder;
u8 vborder;
u8 misc;
} __attribute__((packed));
/* If it's not pixel timing, it'll be one of the below */
struct detailed_data_string {
u8 str[13];
} __attribute__((packed));
struct detailed_data_monitor_range {
u8 min_vfreq;
u8 max_vfreq;
u8 min_hfreq_khz;
u8 max_hfreq_khz;
u8 pixel_clock_mhz; /* need to multiply by 10 */
u8 flags;
union {
struct {
u8 reserved;
u8 hfreq_start_khz; /* need to multiply by 2 */
u8 c; /* need to divide by 2 */
__le16 m;
u8 k;
u8 j; /* need to divide by 2 */
} __attribute__((packed)) gtf2;
struct {
u8 version;
u8 data1; /* high 6 bits: extra clock resolution */
u8 data2; /* plus low 2 of above: max hactive */
u8 supported_aspects;
u8 flags; /* preferred aspect and blanking support */
u8 supported_scalings;
u8 preferred_refresh;
} __attribute__((packed)) cvt;
} formula;
} __attribute__((packed));
struct detailed_data_wpindex {
u8 white_yx_lo; /* Lower 2 bits each */
u8 white_x_hi;
u8 white_y_hi;
u8 gamma; /* need to divide by 100 then add 1 */
} __attribute__((packed));
struct detailed_data_color_point {
u8 windex1;
u8 wpindex1[3];
u8 windex2;
u8 wpindex2[3];
} __attribute__((packed));
struct cvt_timing {
u8 code[3];
} __attribute__((packed));
struct detailed_non_pixel {
u8 pad1;
u8 type; /* ff=serial, fe=string, fd=monitor range, fc=monitor name
fb=color point data, fa=standard timing data,
f9=undefined, f8=mfg. reserved */
u8 pad2;
union {
struct detailed_data_string str;
struct detailed_data_monitor_range range;
struct detailed_data_wpindex color;
struct std_timing timings[6];
struct cvt_timing cvt[4];
} data;
} __attribute__((packed));
#define EDID_DETAIL_EST_TIMINGS 0xf7
#define EDID_DETAIL_CVT_3BYTE 0xf8
#define EDID_DETAIL_COLOR_MGMT_DATA 0xf9
#define EDID_DETAIL_STD_MODES 0xfa
#define EDID_DETAIL_MONITOR_CPDATA 0xfb
#define EDID_DETAIL_MONITOR_NAME 0xfc
#define EDID_DETAIL_MONITOR_RANGE 0xfd
#define EDID_DETAIL_MONITOR_STRING 0xfe
#define EDID_DETAIL_MONITOR_SERIAL 0xff
struct detailed_timing {
__le16 pixel_clock; /* need to multiply by 10 KHz */
union {
struct detailed_pixel_timing pixel_data;
struct detailed_non_pixel other_data;
} data;
} __attribute__((packed));
#define DRM_EDID_INPUT_SERRATION_VSYNC (1 << 0)
#define DRM_EDID_INPUT_SYNC_ON_GREEN (1 << 1)
#define DRM_EDID_INPUT_COMPOSITE_SYNC (1 << 2)
#define DRM_EDID_INPUT_SEPARATE_SYNCS (1 << 3)
#define DRM_EDID_INPUT_BLANK_TO_BLACK (1 << 4)
#define DRM_EDID_INPUT_VIDEO_LEVEL (3 << 5)
#define DRM_EDID_INPUT_DIGITAL (1 << 7)
#define DRM_EDID_DIGITAL_DEPTH_MASK (7 << 4)
#define DRM_EDID_DIGITAL_DEPTH_UNDEF (0 << 4)
#define DRM_EDID_DIGITAL_DEPTH_6 (1 << 4)
#define DRM_EDID_DIGITAL_DEPTH_8 (2 << 4)
#define DRM_EDID_DIGITAL_DEPTH_10 (3 << 4)
#define DRM_EDID_DIGITAL_DEPTH_12 (4 << 4)
#define DRM_EDID_DIGITAL_DEPTH_14 (5 << 4)
#define DRM_EDID_DIGITAL_DEPTH_16 (6 << 4)
#define DRM_EDID_DIGITAL_DEPTH_RSVD (7 << 4)
#define DRM_EDID_DIGITAL_TYPE_UNDEF (0)
#define DRM_EDID_DIGITAL_TYPE_DVI (1)
#define DRM_EDID_DIGITAL_TYPE_HDMI_A (2)
#define DRM_EDID_DIGITAL_TYPE_HDMI_B (3)
#define DRM_EDID_DIGITAL_TYPE_MDDI (4)
#define DRM_EDID_DIGITAL_TYPE_DP (5)
#define DRM_EDID_FEATURE_DEFAULT_GTF (1 << 0)
#define DRM_EDID_FEATURE_PREFERRED_TIMING (1 << 1)
#define DRM_EDID_FEATURE_STANDARD_COLOR (1 << 2)
/* If analog */
#define DRM_EDID_FEATURE_DISPLAY_TYPE (3 << 3) /* 00=mono, 01=rgb, 10=non-rgb, 11=unknown */
/* If digital */
#define DRM_EDID_FEATURE_COLOR_MASK (3 << 3)
#define DRM_EDID_FEATURE_RGB (0 << 3)
#define DRM_EDID_FEATURE_RGB_YCRCB444 (1 << 3)
#define DRM_EDID_FEATURE_RGB_YCRCB422 (2 << 3)
#define DRM_EDID_FEATURE_RGB_YCRCB (3 << 3) /* both 4:4:4 and 4:2:2 */
#define DRM_EDID_FEATURE_PM_ACTIVE_OFF (1 << 5)
#define DRM_EDID_FEATURE_PM_SUSPEND (1 << 6)
#define DRM_EDID_FEATURE_PM_STANDBY (1 << 7)
#define DRM_EDID_HDMI_DC_48 (1 << 6)
#define DRM_EDID_HDMI_DC_36 (1 << 5)
#define DRM_EDID_HDMI_DC_30 (1 << 4)
#define DRM_EDID_HDMI_DC_Y444 (1 << 3)
/* ELD Header Block */
#define DRM_ELD_HEADER_BLOCK_SIZE 4
#define DRM_ELD_VER 0
# define DRM_ELD_VER_SHIFT 3
# define DRM_ELD_VER_MASK (0x1f << 3)
# define DRM_ELD_VER_CEA861D (2 << 3) /* supports 861D or below */
# define DRM_ELD_VER_CANNED (0x1f << 3)
#define DRM_ELD_BASELINE_ELD_LEN 2 /* in dwords! */
/* ELD Baseline Block for ELD_Ver == 2 */
#define DRM_ELD_CEA_EDID_VER_MNL 4
# define DRM_ELD_CEA_EDID_VER_SHIFT 5
# define DRM_ELD_CEA_EDID_VER_MASK (7 << 5)
# define DRM_ELD_CEA_EDID_VER_NONE (0 << 5)
# define DRM_ELD_CEA_EDID_VER_CEA861 (1 << 5)
# define DRM_ELD_CEA_EDID_VER_CEA861A (2 << 5)
# define DRM_ELD_CEA_EDID_VER_CEA861BCD (3 << 5)
# define DRM_ELD_MNL_SHIFT 0
# define DRM_ELD_MNL_MASK (0x1f << 0)
#define DRM_ELD_SAD_COUNT_CONN_TYPE 5
# define DRM_ELD_SAD_COUNT_SHIFT 4
# define DRM_ELD_SAD_COUNT_MASK (0xf << 4)
# define DRM_ELD_CONN_TYPE_SHIFT 2
# define DRM_ELD_CONN_TYPE_MASK (3 << 2)
# define DRM_ELD_CONN_TYPE_HDMI (0 << 2)
# define DRM_ELD_CONN_TYPE_DP (1 << 2)
# define DRM_ELD_SUPPORTS_AI (1 << 1)
# define DRM_ELD_SUPPORTS_HDCP (1 << 0)
#define DRM_ELD_AUD_SYNCH_DELAY 6 /* in units of 2 ms */
# define DRM_ELD_AUD_SYNCH_DELAY_MAX 0xfa /* 500 ms */
#define DRM_ELD_SPEAKER 7
# define DRM_ELD_SPEAKER_RLRC (1 << 6)
# define DRM_ELD_SPEAKER_FLRC (1 << 5)
# define DRM_ELD_SPEAKER_RC (1 << 4)
# define DRM_ELD_SPEAKER_RLR (1 << 3)
# define DRM_ELD_SPEAKER_FC (1 << 2)
# define DRM_ELD_SPEAKER_LFE (1 << 1)
# define DRM_ELD_SPEAKER_FLR (1 << 0)
#define DRM_ELD_PORT_ID 8 /* offsets 8..15 inclusive */
# define DRM_ELD_PORT_ID_LEN 8
#define DRM_ELD_MANUFACTURER_NAME0 16
#define DRM_ELD_MANUFACTURER_NAME1 17
#define DRM_ELD_PRODUCT_CODE0 18
#define DRM_ELD_PRODUCT_CODE1 19
#define DRM_ELD_MONITOR_NAME_STRING 20 /* offsets 20..(20+mnl-1) inclusive */
#define DRM_ELD_CEA_SAD(mnl, sad) (20 + (mnl) + 3 * (sad))
struct edid {
u8 header[8];
/* Vendor & product info */
u8 mfg_id[2];
u8 prod_code[2];
u32 serial; /* FIXME: byte order */
u8 mfg_week;
u8 mfg_year;
/* EDID version */
u8 version;
u8 revision;
/* Display info: */
u8 input;
u8 width_cm;
u8 height_cm;
u8 gamma;
u8 features;
/* Color characteristics */
u8 red_green_lo;
u8 black_white_lo;
u8 red_x;
u8 red_y;
u8 green_x;
u8 green_y;
u8 blue_x;
u8 blue_y;
u8 white_x;
u8 white_y;
/* Est. timings and mfg rsvd timings*/
struct est_timings established_timings;
/* Standard timings 1-8*/
struct std_timing standard_timings[8];
/* Detailing timings 1-4 */
struct detailed_timing detailed_timings[4];
/* Number of 128 byte ext. blocks */
u8 extensions;
/* Checksum */
u8 checksum;
} __attribute__((packed));
#define EDID_PRODUCT_ID(e) ((e)->prod_code[0] | ((e)->prod_code[1] << 8))
/* Short Audio Descriptor */
struct cea_sad {
u8 format;
u8 channels; /* max number of channels - 1 */
u8 freq;
u8 byte2; /* meaning depends on format */
};
drm: support routines for HDMI/DP ELD ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio capabilities of the plugged monitor. This adds drm_edid_to_eld() for converting EDID to ELD. The converted ELD will be saved in a new drm_connector.eld[128] data field. This is necessary because the graphics driver will need to fixup some of the data fields (eg. HDMI/DP connection type, AV sync delay) before writing to the hardware ELD buffer. drm_av_sync_delay() will help the graphics drivers dynamically compute the AV sync delay for fixing-up the ELD. ELD selection policy: it's possible for one encoder to be associated with multiple connectors (ie. monitors), in which case the first found ELD will be returned by drm_select_eld(). This policy may not be suitable for all users, but let's start it simple first. The impact of ELD selection policy: assume there are two monitors, one supports stereo playback and the other has 8-channel output; cloned display mode is used, so that the two monitors are associated with the same internal encoder. If only the stereo playback capability is reported, the user won't be able to start 8-channel playback; if the 8-channel ELD is reported, then user space applications may send 8-channel samples down, however the user may actually be listening to the 2-channel monitor and not connecting speakers to the 8-channel monitor. According to James, many TVs will either refuse the display anything or pop-up an OSD warning whenever they receive hdmi audio which they cannot handle. Eventually we will require configurability and/or per-monitor audio control even when the video is cloned. CC: Zhao Yakui <yakui.zhao@intel.com> CC: Wang Zhenyu <zhenyu.z.wang@intel.com> CC: Jeremy Bush <contractfrombelow@gmail.com> CC: Christopher White <c.white@pulseforce.com> CC: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> CC: Paul Menzel <paulepanter@users.sourceforge.net> CC: James Cloos <cloos@jhcloos.com> CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-05 10:23:20 +04:00
struct drm_encoder;
struct drm_connector;
struct drm_display_mode;
struct hdmi_avi_infoframe;
struct hdmi_vendor_infoframe;
drm: support routines for HDMI/DP ELD ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio capabilities of the plugged monitor. This adds drm_edid_to_eld() for converting EDID to ELD. The converted ELD will be saved in a new drm_connector.eld[128] data field. This is necessary because the graphics driver will need to fixup some of the data fields (eg. HDMI/DP connection type, AV sync delay) before writing to the hardware ELD buffer. drm_av_sync_delay() will help the graphics drivers dynamically compute the AV sync delay for fixing-up the ELD. ELD selection policy: it's possible for one encoder to be associated with multiple connectors (ie. monitors), in which case the first found ELD will be returned by drm_select_eld(). This policy may not be suitable for all users, but let's start it simple first. The impact of ELD selection policy: assume there are two monitors, one supports stereo playback and the other has 8-channel output; cloned display mode is used, so that the two monitors are associated with the same internal encoder. If only the stereo playback capability is reported, the user won't be able to start 8-channel playback; if the 8-channel ELD is reported, then user space applications may send 8-channel samples down, however the user may actually be listening to the 2-channel monitor and not connecting speakers to the 8-channel monitor. According to James, many TVs will either refuse the display anything or pop-up an OSD warning whenever they receive hdmi audio which they cannot handle. Eventually we will require configurability and/or per-monitor audio control even when the video is cloned. CC: Zhao Yakui <yakui.zhao@intel.com> CC: Wang Zhenyu <zhenyu.z.wang@intel.com> CC: Jeremy Bush <contractfrombelow@gmail.com> CC: Christopher White <c.white@pulseforce.com> CC: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> CC: Paul Menzel <paulepanter@users.sourceforge.net> CC: James Cloos <cloos@jhcloos.com> CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-05 10:23:20 +04:00
void drm_edid_to_eld(struct drm_connector *connector, struct edid *edid);
int drm_edid_to_sad(struct edid *edid, struct cea_sad **sads);
int drm_edid_to_speaker_allocation(struct edid *edid, u8 **sadb);
drm: support routines for HDMI/DP ELD ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio capabilities of the plugged monitor. This adds drm_edid_to_eld() for converting EDID to ELD. The converted ELD will be saved in a new drm_connector.eld[128] data field. This is necessary because the graphics driver will need to fixup some of the data fields (eg. HDMI/DP connection type, AV sync delay) before writing to the hardware ELD buffer. drm_av_sync_delay() will help the graphics drivers dynamically compute the AV sync delay for fixing-up the ELD. ELD selection policy: it's possible for one encoder to be associated with multiple connectors (ie. monitors), in which case the first found ELD will be returned by drm_select_eld(). This policy may not be suitable for all users, but let's start it simple first. The impact of ELD selection policy: assume there are two monitors, one supports stereo playback and the other has 8-channel output; cloned display mode is used, so that the two monitors are associated with the same internal encoder. If only the stereo playback capability is reported, the user won't be able to start 8-channel playback; if the 8-channel ELD is reported, then user space applications may send 8-channel samples down, however the user may actually be listening to the 2-channel monitor and not connecting speakers to the 8-channel monitor. According to James, many TVs will either refuse the display anything or pop-up an OSD warning whenever they receive hdmi audio which they cannot handle. Eventually we will require configurability and/or per-monitor audio control even when the video is cloned. CC: Zhao Yakui <yakui.zhao@intel.com> CC: Wang Zhenyu <zhenyu.z.wang@intel.com> CC: Jeremy Bush <contractfrombelow@gmail.com> CC: Christopher White <c.white@pulseforce.com> CC: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> CC: Paul Menzel <paulepanter@users.sourceforge.net> CC: James Cloos <cloos@jhcloos.com> CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-05 10:23:20 +04:00
int drm_av_sync_delay(struct drm_connector *connector,
struct drm_display_mode *mode);
struct drm_connector *drm_select_eld(struct drm_encoder *encoder,
struct drm_display_mode *mode);
drm: allow loading an EDID as firmware to override broken monitor Broken monitors and/or broken graphic boards may send erroneous or no EDID data. This also applies to broken KVM devices that are unable to correctly forward the EDID data of the connected monitor but invent their own fantasy data. This patch allows to specify an EDID data set to be used instead of probing the monitor for it. It contains built-in data sets of frequently used screen resolutions. In addition, a particular EDID data set may be provided in the /lib/firmware directory and loaded via the firmware interface. The name is passed to the kernel as module parameter of the drm_kms_helper module either when loaded options drm_kms_helper edid_firmware=edid/1280x1024.bin or as kernel commandline parameter drm_kms_helper.edid_firmware=edid/1280x1024.bin It is also possible to restrict the usage of a specified EDID data set to a particular connector. This is done by prepending the name of the connector to the name of the EDID data set using the syntax edid_firmware=[<connector>:]<edid> such as, for example, edid_firmware=DVI-I-1:edid/1920x1080.bin in which case no other connector will be affected. The built-in data sets are Resolution Name -------------------------------- 1024x768 edid/1024x768.bin 1280x1024 edid/1280x1024.bin 1680x1050 edid/1680x1050.bin 1920x1080 edid/1920x1080.bin They are ignored, if a file with the same name is available in the /lib/firmware directory. The built-in EDID data sets are based on standard timings that may not apply to a particular monitor and even crash it. Ideally, EDID data of the connected monitor should be used. They may be obtained through the drm/cardX/cardX-<connector>/edid entry in the /sys/devices PCI directory of a correctly working graphics adapter. It is even possible to specify the name of an EDID data set on-the-fly via the /sys/module interface, e.g. echo edid/myedid.bin >/sys/module/drm_kms_helper/parameters/edid_firmware The new screen mode is considered when the related kernel function is called for the first time after the change. Such calls are made when the X server is started or when the display settings dialog is opened in an already running X server. Signed-off-by: Carsten Emde <C.Emde@osadl.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-19 01:37:33 +04:00
int drm_load_edid_firmware(struct drm_connector *connector);
drm: support routines for HDMI/DP ELD ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio capabilities of the plugged monitor. This adds drm_edid_to_eld() for converting EDID to ELD. The converted ELD will be saved in a new drm_connector.eld[128] data field. This is necessary because the graphics driver will need to fixup some of the data fields (eg. HDMI/DP connection type, AV sync delay) before writing to the hardware ELD buffer. drm_av_sync_delay() will help the graphics drivers dynamically compute the AV sync delay for fixing-up the ELD. ELD selection policy: it's possible for one encoder to be associated with multiple connectors (ie. monitors), in which case the first found ELD will be returned by drm_select_eld(). This policy may not be suitable for all users, but let's start it simple first. The impact of ELD selection policy: assume there are two monitors, one supports stereo playback and the other has 8-channel output; cloned display mode is used, so that the two monitors are associated with the same internal encoder. If only the stereo playback capability is reported, the user won't be able to start 8-channel playback; if the 8-channel ELD is reported, then user space applications may send 8-channel samples down, however the user may actually be listening to the 2-channel monitor and not connecting speakers to the 8-channel monitor. According to James, many TVs will either refuse the display anything or pop-up an OSD warning whenever they receive hdmi audio which they cannot handle. Eventually we will require configurability and/or per-monitor audio control even when the video is cloned. CC: Zhao Yakui <yakui.zhao@intel.com> CC: Wang Zhenyu <zhenyu.z.wang@intel.com> CC: Jeremy Bush <contractfrombelow@gmail.com> CC: Christopher White <c.white@pulseforce.com> CC: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> CC: Paul Menzel <paulepanter@users.sourceforge.net> CC: James Cloos <cloos@jhcloos.com> CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-05 10:23:20 +04:00
int
drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame,
const struct drm_display_mode *mode);
int
drm_hdmi_vendor_infoframe_from_display_mode(struct hdmi_vendor_infoframe *frame,
const struct drm_display_mode *mode);
/**
* drm_eld_mnl - Get ELD monitor name length in bytes.
* @eld: pointer to an eld memory structure with mnl set
*/
static inline int drm_eld_mnl(const uint8_t *eld)
{
return (eld[DRM_ELD_CEA_EDID_VER_MNL] & DRM_ELD_MNL_MASK) >> DRM_ELD_MNL_SHIFT;
}
/**
* drm_eld_sad - Get ELD SAD structures.
* @eld: pointer to an eld memory structure with sad_count set
*/
static inline const uint8_t *drm_eld_sad(const uint8_t *eld)
{
unsigned int ver, mnl;
ver = (eld[DRM_ELD_VER] & DRM_ELD_VER_MASK) >> DRM_ELD_VER_SHIFT;
if (ver != 2 && ver != 31)
return NULL;
mnl = drm_eld_mnl(eld);
if (mnl > 16)
return NULL;
return eld + DRM_ELD_CEA_SAD(mnl, 0);
}
/**
* drm_eld_sad_count - Get ELD SAD count.
* @eld: pointer to an eld memory structure with sad_count set
*/
static inline int drm_eld_sad_count(const uint8_t *eld)
{
return (eld[DRM_ELD_SAD_COUNT_CONN_TYPE] & DRM_ELD_SAD_COUNT_MASK) >>
DRM_ELD_SAD_COUNT_SHIFT;
}
/**
* drm_eld_calc_baseline_block_size - Calculate baseline block size in bytes
* @eld: pointer to an eld memory structure with mnl and sad_count set
*
* This is a helper for determining the payload size of the baseline block, in
* bytes, for e.g. setting the Baseline_ELD_Len field in the ELD header block.
*/
static inline int drm_eld_calc_baseline_block_size(const uint8_t *eld)
{
return DRM_ELD_MONITOR_NAME_STRING - DRM_ELD_HEADER_BLOCK_SIZE +
drm_eld_mnl(eld) + drm_eld_sad_count(eld) * 3;
}
/**
* drm_eld_size - Get ELD size in bytes
* @eld: pointer to a complete eld memory structure
*
* The returned value does not include the vendor block. It's vendor specific,
* and comprises of the remaining bytes in the ELD memory buffer after
* drm_eld_size() bytes of header and baseline block.
*
* The returned value is guaranteed to be a multiple of 4.
*/
static inline int drm_eld_size(const uint8_t *eld)
{
return DRM_ELD_HEADER_BLOCK_SIZE + eld[DRM_ELD_BASELINE_ELD_LEN] * 4;
}
struct edid *drm_do_get_edid(struct drm_connector *connector,
int (*get_edid_block)(void *data, u8 *buf, unsigned int block,
size_t len),
void *data);
#endif /* __DRM_EDID_H__ */