WSL2-Linux-Kernel/kernel/bpf/stackmap.c

722 строки
18 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0-only
/* Copyright (c) 2016 Facebook
*/
#include <linux/bpf.h>
#include <linux/jhash.h>
#include <linux/filter.h>
#include <linux/kernel.h>
#include <linux/stacktrace.h>
#include <linux/perf_event.h>
#include <linux/irq_work.h>
#include <linux/btf_ids.h>
#include <linux/buildid.h>
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 08:57:17 +03:00
#include "percpu_freelist.h"
bpf: extend stackmap to save binary_build_id+offset instead of address Currently, bpf stackmap store address for each entry in the call trace. To map these addresses to user space files, it is necessary to maintain the mapping from these virtual address to symbols in the binary. Usually, the user space profiler (such as perf) has to scan /proc/pid/maps at the beginning of profiling, and monitor mmap2() calls afterwards. Given the cost of maintaining the address map, this solution is not practical for system wide profiling that is always on. This patch tries to solve this problem with a variation of stackmap. This variation is enabled by flag BPF_F_STACK_BUILD_ID. Instead of storing addresses, the variation stores ELF file build_id + offset. Build ID is a 20-byte unique identifier for ELF files. The following command shows the Build ID of /bin/bash: [user@]$ readelf -n /bin/bash ... Build ID: XXXXXXXXXX ... With BPF_F_STACK_BUILD_ID, bpf_get_stackid() tries to parse Build ID for each entry in the call trace, and translate it into the following struct: struct bpf_stack_build_id_offset { __s32 status; unsigned char build_id[BPF_BUILD_ID_SIZE]; union { __u64 offset; __u64 ip; }; }; The search of build_id is limited to the first page of the file, and this page should be in page cache. Otherwise, we fallback to store ip for this entry (ip field in struct bpf_stack_build_id_offset). This requires the build_id to be stored in the first page. A quick survey of binary and dynamic library files in a few different systems shows that almost all binary and dynamic library files have build_id in the first page. Build_id is only meaningful for user stack. If a kernel stack is added to a stackmap with BPF_F_STACK_BUILD_ID, it will automatically fallback to only store ip (status == BPF_STACK_BUILD_ID_IP). Similarly, if build_id lookup failed for some reason, it will also fallback to store ip. User space can access struct bpf_stack_build_id_offset with bpf syscall BPF_MAP_LOOKUP_ELEM. It is necessary for user space to maintain mapping from build id to binary files. This mostly static mapping is much easier to maintain than per process address maps. Note: Stackmap with build_id only works in non-nmi context at this time. This is because we need to take mm->mmap_sem for find_vma(). If this changes, we would like to allow build_id lookup in nmi context. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-14 20:23:21 +03:00
#define STACK_CREATE_FLAG_MASK \
(BPF_F_NUMA_NODE | BPF_F_RDONLY | BPF_F_WRONLY | \
BPF_F_STACK_BUILD_ID)
struct stack_map_bucket {
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 08:57:17 +03:00
struct pcpu_freelist_node fnode;
u32 hash;
u32 nr;
bpf: extend stackmap to save binary_build_id+offset instead of address Currently, bpf stackmap store address for each entry in the call trace. To map these addresses to user space files, it is necessary to maintain the mapping from these virtual address to symbols in the binary. Usually, the user space profiler (such as perf) has to scan /proc/pid/maps at the beginning of profiling, and monitor mmap2() calls afterwards. Given the cost of maintaining the address map, this solution is not practical for system wide profiling that is always on. This patch tries to solve this problem with a variation of stackmap. This variation is enabled by flag BPF_F_STACK_BUILD_ID. Instead of storing addresses, the variation stores ELF file build_id + offset. Build ID is a 20-byte unique identifier for ELF files. The following command shows the Build ID of /bin/bash: [user@]$ readelf -n /bin/bash ... Build ID: XXXXXXXXXX ... With BPF_F_STACK_BUILD_ID, bpf_get_stackid() tries to parse Build ID for each entry in the call trace, and translate it into the following struct: struct bpf_stack_build_id_offset { __s32 status; unsigned char build_id[BPF_BUILD_ID_SIZE]; union { __u64 offset; __u64 ip; }; }; The search of build_id is limited to the first page of the file, and this page should be in page cache. Otherwise, we fallback to store ip for this entry (ip field in struct bpf_stack_build_id_offset). This requires the build_id to be stored in the first page. A quick survey of binary and dynamic library files in a few different systems shows that almost all binary and dynamic library files have build_id in the first page. Build_id is only meaningful for user stack. If a kernel stack is added to a stackmap with BPF_F_STACK_BUILD_ID, it will automatically fallback to only store ip (status == BPF_STACK_BUILD_ID_IP). Similarly, if build_id lookup failed for some reason, it will also fallback to store ip. User space can access struct bpf_stack_build_id_offset with bpf syscall BPF_MAP_LOOKUP_ELEM. It is necessary for user space to maintain mapping from build id to binary files. This mostly static mapping is much easier to maintain than per process address maps. Note: Stackmap with build_id only works in non-nmi context at this time. This is because we need to take mm->mmap_sem for find_vma(). If this changes, we would like to allow build_id lookup in nmi context. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-14 20:23:21 +03:00
u64 data[];
};
struct bpf_stack_map {
struct bpf_map map;
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 08:57:17 +03:00
void *elems;
struct pcpu_freelist freelist;
u32 n_buckets;
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 08:57:17 +03:00
struct stack_map_bucket *buckets[];
};
/* irq_work to run up_read() for build_id lookup in nmi context */
struct stack_map_irq_work {
struct irq_work irq_work;
struct mm_struct *mm;
};
static void do_up_read(struct irq_work *entry)
{
struct stack_map_irq_work *work;
if (WARN_ON_ONCE(IS_ENABLED(CONFIG_PREEMPT_RT)))
return;
work = container_of(entry, struct stack_map_irq_work, irq_work);
mmap_read_unlock_non_owner(work->mm);
}
static DEFINE_PER_CPU(struct stack_map_irq_work, up_read_work);
bpf: extend stackmap to save binary_build_id+offset instead of address Currently, bpf stackmap store address for each entry in the call trace. To map these addresses to user space files, it is necessary to maintain the mapping from these virtual address to symbols in the binary. Usually, the user space profiler (such as perf) has to scan /proc/pid/maps at the beginning of profiling, and monitor mmap2() calls afterwards. Given the cost of maintaining the address map, this solution is not practical for system wide profiling that is always on. This patch tries to solve this problem with a variation of stackmap. This variation is enabled by flag BPF_F_STACK_BUILD_ID. Instead of storing addresses, the variation stores ELF file build_id + offset. Build ID is a 20-byte unique identifier for ELF files. The following command shows the Build ID of /bin/bash: [user@]$ readelf -n /bin/bash ... Build ID: XXXXXXXXXX ... With BPF_F_STACK_BUILD_ID, bpf_get_stackid() tries to parse Build ID for each entry in the call trace, and translate it into the following struct: struct bpf_stack_build_id_offset { __s32 status; unsigned char build_id[BPF_BUILD_ID_SIZE]; union { __u64 offset; __u64 ip; }; }; The search of build_id is limited to the first page of the file, and this page should be in page cache. Otherwise, we fallback to store ip for this entry (ip field in struct bpf_stack_build_id_offset). This requires the build_id to be stored in the first page. A quick survey of binary and dynamic library files in a few different systems shows that almost all binary and dynamic library files have build_id in the first page. Build_id is only meaningful for user stack. If a kernel stack is added to a stackmap with BPF_F_STACK_BUILD_ID, it will automatically fallback to only store ip (status == BPF_STACK_BUILD_ID_IP). Similarly, if build_id lookup failed for some reason, it will also fallback to store ip. User space can access struct bpf_stack_build_id_offset with bpf syscall BPF_MAP_LOOKUP_ELEM. It is necessary for user space to maintain mapping from build id to binary files. This mostly static mapping is much easier to maintain than per process address maps. Note: Stackmap with build_id only works in non-nmi context at this time. This is because we need to take mm->mmap_sem for find_vma(). If this changes, we would like to allow build_id lookup in nmi context. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-14 20:23:21 +03:00
static inline bool stack_map_use_build_id(struct bpf_map *map)
{
return (map->map_flags & BPF_F_STACK_BUILD_ID);
}
static inline int stack_map_data_size(struct bpf_map *map)
{
return stack_map_use_build_id(map) ?
sizeof(struct bpf_stack_build_id) : sizeof(u64);
}
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 08:57:17 +03:00
static int prealloc_elems_and_freelist(struct bpf_stack_map *smap)
{
u32 elem_size = sizeof(struct stack_map_bucket) + smap->map.value_size;
int err;
bpf: Allow selecting numa node during map creation The current map creation API does not allow to provide the numa-node preference. The memory usually comes from where the map-creation-process is running. The performance is not ideal if the bpf_prog is known to always run in a numa node different from the map-creation-process. One of the use case is sharding on CPU to different LRU maps (i.e. an array of LRU maps). Here is the test result of map_perf_test on the INNER_LRU_HASH_PREALLOC test if we force the lru map used by CPU0 to be allocated from a remote numa node: [ The machine has 20 cores. CPU0-9 at node 0. CPU10-19 at node 1 ] ># taskset -c 10 ./map_perf_test 512 8 1260000 8000000 5:inner_lru_hash_map_perf pre-alloc 1628380 events per sec 4:inner_lru_hash_map_perf pre-alloc 1626396 events per sec 3:inner_lru_hash_map_perf pre-alloc 1626144 events per sec 6:inner_lru_hash_map_perf pre-alloc 1621657 events per sec 2:inner_lru_hash_map_perf pre-alloc 1621534 events per sec 1:inner_lru_hash_map_perf pre-alloc 1620292 events per sec 7:inner_lru_hash_map_perf pre-alloc 1613305 events per sec 0:inner_lru_hash_map_perf pre-alloc 1239150 events per sec #<<< After specifying numa node: ># taskset -c 10 ./map_perf_test 512 8 1260000 8000000 5:inner_lru_hash_map_perf pre-alloc 1629627 events per sec 3:inner_lru_hash_map_perf pre-alloc 1628057 events per sec 1:inner_lru_hash_map_perf pre-alloc 1623054 events per sec 6:inner_lru_hash_map_perf pre-alloc 1616033 events per sec 2:inner_lru_hash_map_perf pre-alloc 1614630 events per sec 4:inner_lru_hash_map_perf pre-alloc 1612651 events per sec 7:inner_lru_hash_map_perf pre-alloc 1609337 events per sec 0:inner_lru_hash_map_perf pre-alloc 1619340 events per sec #<<< This patch adds one field, numa_node, to the bpf_attr. Since numa node 0 is a valid node, a new flag BPF_F_NUMA_NODE is also added. The numa_node field is honored if and only if the BPF_F_NUMA_NODE flag is set. Numa node selection is not supported for percpu map. This patch does not change all the kmalloc. F.e. 'htab = kzalloc()' is not changed since the object is small enough to stay in the cache. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 21:28:00 +03:00
smap->elems = bpf_map_area_alloc(elem_size * smap->map.max_entries,
smap->map.numa_node);
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 08:57:17 +03:00
if (!smap->elems)
return -ENOMEM;
err = pcpu_freelist_init(&smap->freelist);
if (err)
goto free_elems;
pcpu_freelist_populate(&smap->freelist, smap->elems, elem_size,
smap->map.max_entries);
return 0;
free_elems:
bpf_map_area_free(smap->elems);
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 08:57:17 +03:00
return err;
}
/* Called from syscall */
static struct bpf_map *stack_map_alloc(union bpf_attr *attr)
{
u32 value_size = attr->value_size;
struct bpf_stack_map *smap;
u64 cost, n_buckets;
int err;
if (!bpf_capable())
return ERR_PTR(-EPERM);
if (attr->map_flags & ~STACK_CREATE_FLAG_MASK)
return ERR_PTR(-EINVAL);
/* check sanity of attributes */
if (attr->max_entries == 0 || attr->key_size != 4 ||
bpf: extend stackmap to save binary_build_id+offset instead of address Currently, bpf stackmap store address for each entry in the call trace. To map these addresses to user space files, it is necessary to maintain the mapping from these virtual address to symbols in the binary. Usually, the user space profiler (such as perf) has to scan /proc/pid/maps at the beginning of profiling, and monitor mmap2() calls afterwards. Given the cost of maintaining the address map, this solution is not practical for system wide profiling that is always on. This patch tries to solve this problem with a variation of stackmap. This variation is enabled by flag BPF_F_STACK_BUILD_ID. Instead of storing addresses, the variation stores ELF file build_id + offset. Build ID is a 20-byte unique identifier for ELF files. The following command shows the Build ID of /bin/bash: [user@]$ readelf -n /bin/bash ... Build ID: XXXXXXXXXX ... With BPF_F_STACK_BUILD_ID, bpf_get_stackid() tries to parse Build ID for each entry in the call trace, and translate it into the following struct: struct bpf_stack_build_id_offset { __s32 status; unsigned char build_id[BPF_BUILD_ID_SIZE]; union { __u64 offset; __u64 ip; }; }; The search of build_id is limited to the first page of the file, and this page should be in page cache. Otherwise, we fallback to store ip for this entry (ip field in struct bpf_stack_build_id_offset). This requires the build_id to be stored in the first page. A quick survey of binary and dynamic library files in a few different systems shows that almost all binary and dynamic library files have build_id in the first page. Build_id is only meaningful for user stack. If a kernel stack is added to a stackmap with BPF_F_STACK_BUILD_ID, it will automatically fallback to only store ip (status == BPF_STACK_BUILD_ID_IP). Similarly, if build_id lookup failed for some reason, it will also fallback to store ip. User space can access struct bpf_stack_build_id_offset with bpf syscall BPF_MAP_LOOKUP_ELEM. It is necessary for user space to maintain mapping from build id to binary files. This mostly static mapping is much easier to maintain than per process address maps. Note: Stackmap with build_id only works in non-nmi context at this time. This is because we need to take mm->mmap_sem for find_vma(). If this changes, we would like to allow build_id lookup in nmi context. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-14 20:23:21 +03:00
value_size < 8 || value_size % 8)
return ERR_PTR(-EINVAL);
BUILD_BUG_ON(sizeof(struct bpf_stack_build_id) % sizeof(u64));
if (attr->map_flags & BPF_F_STACK_BUILD_ID) {
if (value_size % sizeof(struct bpf_stack_build_id) ||
value_size / sizeof(struct bpf_stack_build_id)
> sysctl_perf_event_max_stack)
return ERR_PTR(-EINVAL);
} else if (value_size / 8 > sysctl_perf_event_max_stack)
return ERR_PTR(-EINVAL);
/* hash table size must be power of 2 */
n_buckets = roundup_pow_of_two(attr->max_entries);
if (!n_buckets)
return ERR_PTR(-E2BIG);
cost = n_buckets * sizeof(struct stack_map_bucket *) + sizeof(*smap);
bpf: rework memlock-based memory accounting for maps In order to unify the existing memlock charging code with the memcg-based memory accounting, which will be added later, let's rework the current scheme. Currently the following design is used: 1) .alloc() callback optionally checks if the allocation will likely succeed using bpf_map_precharge_memlock() 2) .alloc() performs actual allocations 3) .alloc() callback calculates map cost and sets map.memory.pages 4) map_create() calls bpf_map_init_memlock() which sets map.memory.user and performs actual charging; in case of failure the map is destroyed <map is in use> 1) bpf_map_free_deferred() calls bpf_map_release_memlock(), which performs uncharge and releases the user 2) .map_free() callback releases the memory The scheme can be simplified and made more robust: 1) .alloc() calculates map cost and calls bpf_map_charge_init() 2) bpf_map_charge_init() sets map.memory.user and performs actual charge 3) .alloc() performs actual allocations <map is in use> 1) .map_free() callback releases the memory 2) bpf_map_charge_finish() performs uncharge and releases the user The new scheme also allows to reuse bpf_map_charge_init()/finish() functions for memcg-based accounting. Because charges are performed before actual allocations and uncharges after freeing the memory, no bogus memory pressure can be created. In cases when the map structure is not available (e.g. it's not created yet, or is already destroyed), on-stack bpf_map_memory structure is used. The charge can be transferred with the bpf_map_charge_move() function. Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-30 04:03:58 +03:00
cost += n_buckets * (value_size + sizeof(struct stack_map_bucket));
bpf: Allow selecting numa node during map creation The current map creation API does not allow to provide the numa-node preference. The memory usually comes from where the map-creation-process is running. The performance is not ideal if the bpf_prog is known to always run in a numa node different from the map-creation-process. One of the use case is sharding on CPU to different LRU maps (i.e. an array of LRU maps). Here is the test result of map_perf_test on the INNER_LRU_HASH_PREALLOC test if we force the lru map used by CPU0 to be allocated from a remote numa node: [ The machine has 20 cores. CPU0-9 at node 0. CPU10-19 at node 1 ] ># taskset -c 10 ./map_perf_test 512 8 1260000 8000000 5:inner_lru_hash_map_perf pre-alloc 1628380 events per sec 4:inner_lru_hash_map_perf pre-alloc 1626396 events per sec 3:inner_lru_hash_map_perf pre-alloc 1626144 events per sec 6:inner_lru_hash_map_perf pre-alloc 1621657 events per sec 2:inner_lru_hash_map_perf pre-alloc 1621534 events per sec 1:inner_lru_hash_map_perf pre-alloc 1620292 events per sec 7:inner_lru_hash_map_perf pre-alloc 1613305 events per sec 0:inner_lru_hash_map_perf pre-alloc 1239150 events per sec #<<< After specifying numa node: ># taskset -c 10 ./map_perf_test 512 8 1260000 8000000 5:inner_lru_hash_map_perf pre-alloc 1629627 events per sec 3:inner_lru_hash_map_perf pre-alloc 1628057 events per sec 1:inner_lru_hash_map_perf pre-alloc 1623054 events per sec 6:inner_lru_hash_map_perf pre-alloc 1616033 events per sec 2:inner_lru_hash_map_perf pre-alloc 1614630 events per sec 4:inner_lru_hash_map_perf pre-alloc 1612651 events per sec 7:inner_lru_hash_map_perf pre-alloc 1609337 events per sec 0:inner_lru_hash_map_perf pre-alloc 1619340 events per sec #<<< This patch adds one field, numa_node, to the bpf_attr. Since numa node 0 is a valid node, a new flag BPF_F_NUMA_NODE is also added. The numa_node field is honored if and only if the BPF_F_NUMA_NODE flag is set. Numa node selection is not supported for percpu map. This patch does not change all the kmalloc. F.e. 'htab = kzalloc()' is not changed since the object is small enough to stay in the cache. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 21:28:00 +03:00
smap = bpf_map_area_alloc(cost, bpf_map_attr_numa_node(attr));
if (!smap)
return ERR_PTR(-ENOMEM);
bpf_map_init_from_attr(&smap->map, attr);
smap->map.value_size = value_size;
smap->n_buckets = n_buckets;
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 08:57:17 +03:00
err = get_callchain_buffers(sysctl_perf_event_max_stack);
if (err)
goto free_smap;
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 08:57:17 +03:00
err = prealloc_elems_and_freelist(smap);
if (err)
goto put_buffers;
return &smap->map;
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 08:57:17 +03:00
put_buffers:
put_callchain_buffers();
free_smap:
bpf_map_area_free(smap);
return ERR_PTR(err);
}
static void stack_map_get_build_id_offset(struct bpf_stack_build_id *id_offs,
bpf: extend stackmap to save binary_build_id+offset instead of address Currently, bpf stackmap store address for each entry in the call trace. To map these addresses to user space files, it is necessary to maintain the mapping from these virtual address to symbols in the binary. Usually, the user space profiler (such as perf) has to scan /proc/pid/maps at the beginning of profiling, and monitor mmap2() calls afterwards. Given the cost of maintaining the address map, this solution is not practical for system wide profiling that is always on. This patch tries to solve this problem with a variation of stackmap. This variation is enabled by flag BPF_F_STACK_BUILD_ID. Instead of storing addresses, the variation stores ELF file build_id + offset. Build ID is a 20-byte unique identifier for ELF files. The following command shows the Build ID of /bin/bash: [user@]$ readelf -n /bin/bash ... Build ID: XXXXXXXXXX ... With BPF_F_STACK_BUILD_ID, bpf_get_stackid() tries to parse Build ID for each entry in the call trace, and translate it into the following struct: struct bpf_stack_build_id_offset { __s32 status; unsigned char build_id[BPF_BUILD_ID_SIZE]; union { __u64 offset; __u64 ip; }; }; The search of build_id is limited to the first page of the file, and this page should be in page cache. Otherwise, we fallback to store ip for this entry (ip field in struct bpf_stack_build_id_offset). This requires the build_id to be stored in the first page. A quick survey of binary and dynamic library files in a few different systems shows that almost all binary and dynamic library files have build_id in the first page. Build_id is only meaningful for user stack. If a kernel stack is added to a stackmap with BPF_F_STACK_BUILD_ID, it will automatically fallback to only store ip (status == BPF_STACK_BUILD_ID_IP). Similarly, if build_id lookup failed for some reason, it will also fallback to store ip. User space can access struct bpf_stack_build_id_offset with bpf syscall BPF_MAP_LOOKUP_ELEM. It is necessary for user space to maintain mapping from build id to binary files. This mostly static mapping is much easier to maintain than per process address maps. Note: Stackmap with build_id only works in non-nmi context at this time. This is because we need to take mm->mmap_sem for find_vma(). If this changes, we would like to allow build_id lookup in nmi context. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-14 20:23:21 +03:00
u64 *ips, u32 trace_nr, bool user)
{
int i;
struct vm_area_struct *vma;
bool irq_work_busy = false;
struct stack_map_irq_work *work = NULL;
bpf/stackmap: Fix deadlock with rq_lock in bpf_get_stack() bpf stackmap with build-id lookup (BPF_F_STACK_BUILD_ID) can trigger A-A deadlock on rq_lock(): rcu: INFO: rcu_sched detected stalls on CPUs/tasks: [...] Call Trace: try_to_wake_up+0x1ad/0x590 wake_up_q+0x54/0x80 rwsem_wake+0x8a/0xb0 bpf_get_stack+0x13c/0x150 bpf_prog_fbdaf42eded9fe46_on_event+0x5e3/0x1000 bpf_overflow_handler+0x60/0x100 __perf_event_overflow+0x4f/0xf0 perf_swevent_overflow+0x99/0xc0 ___perf_sw_event+0xe7/0x120 __schedule+0x47d/0x620 schedule+0x29/0x90 futex_wait_queue_me+0xb9/0x110 futex_wait+0x139/0x230 do_futex+0x2ac/0xa50 __x64_sys_futex+0x13c/0x180 do_syscall_64+0x42/0x100 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This can be reproduced by: 1. Start a multi-thread program that does parallel mmap() and malloc(); 2. taskset the program to 2 CPUs; 3. Attach bpf program to trace_sched_switch and gather stackmap with build-id, e.g. with trace.py from bcc tools: trace.py -U -p <pid> -s <some-bin,some-lib> t:sched:sched_switch A sample reproducer is attached at the end. This could also trigger deadlock with other locks that are nested with rq_lock. Fix this by checking whether irqs are disabled. Since rq_lock and all other nested locks are irq safe, it is safe to do up_read() when irqs are not disable. If the irqs are disabled, postpone up_read() in irq_work. Fixes: 615755a77b24 ("bpf: extend stackmap to save binary_build_id+offset instead of address") Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191014171223.357174-1-songliubraving@fb.com Reproducer: ============================ 8< ============================ char *filename; void *worker(void *p) { void *ptr; int fd; char *pptr; fd = open(filename, O_RDONLY); if (fd < 0) return NULL; while (1) { struct timespec ts = {0, 1000 + rand() % 2000}; ptr = mmap(NULL, 4096 * 64, PROT_READ, MAP_PRIVATE, fd, 0); usleep(1); if (ptr == MAP_FAILED) { printf("failed to mmap\n"); break; } munmap(ptr, 4096 * 64); usleep(1); pptr = malloc(1); usleep(1); pptr[0] = 1; usleep(1); free(pptr); usleep(1); nanosleep(&ts, NULL); } close(fd); return NULL; } int main(int argc, char *argv[]) { void *ptr; int i; pthread_t threads[THREAD_COUNT]; if (argc < 2) return 0; filename = argv[1]; for (i = 0; i < THREAD_COUNT; i++) { if (pthread_create(threads + i, NULL, worker, NULL)) { fprintf(stderr, "Error creating thread\n"); return 0; } } for (i = 0; i < THREAD_COUNT; i++) pthread_join(threads[i], NULL); return 0; } ============================ 8< ============================
2019-10-14 20:12:23 +03:00
if (irqs_disabled()) {
if (!IS_ENABLED(CONFIG_PREEMPT_RT)) {
work = this_cpu_ptr(&up_read_work);
if (irq_work_is_busy(&work->irq_work)) {
/* cannot queue more up_read, fallback */
irq_work_busy = true;
}
} else {
/*
* PREEMPT_RT does not allow to trylock mmap sem in
* interrupt disabled context. Force the fallback code.
*/
irq_work_busy = true;
}
}
bpf: extend stackmap to save binary_build_id+offset instead of address Currently, bpf stackmap store address for each entry in the call trace. To map these addresses to user space files, it is necessary to maintain the mapping from these virtual address to symbols in the binary. Usually, the user space profiler (such as perf) has to scan /proc/pid/maps at the beginning of profiling, and monitor mmap2() calls afterwards. Given the cost of maintaining the address map, this solution is not practical for system wide profiling that is always on. This patch tries to solve this problem with a variation of stackmap. This variation is enabled by flag BPF_F_STACK_BUILD_ID. Instead of storing addresses, the variation stores ELF file build_id + offset. Build ID is a 20-byte unique identifier for ELF files. The following command shows the Build ID of /bin/bash: [user@]$ readelf -n /bin/bash ... Build ID: XXXXXXXXXX ... With BPF_F_STACK_BUILD_ID, bpf_get_stackid() tries to parse Build ID for each entry in the call trace, and translate it into the following struct: struct bpf_stack_build_id_offset { __s32 status; unsigned char build_id[BPF_BUILD_ID_SIZE]; union { __u64 offset; __u64 ip; }; }; The search of build_id is limited to the first page of the file, and this page should be in page cache. Otherwise, we fallback to store ip for this entry (ip field in struct bpf_stack_build_id_offset). This requires the build_id to be stored in the first page. A quick survey of binary and dynamic library files in a few different systems shows that almost all binary and dynamic library files have build_id in the first page. Build_id is only meaningful for user stack. If a kernel stack is added to a stackmap with BPF_F_STACK_BUILD_ID, it will automatically fallback to only store ip (status == BPF_STACK_BUILD_ID_IP). Similarly, if build_id lookup failed for some reason, it will also fallback to store ip. User space can access struct bpf_stack_build_id_offset with bpf syscall BPF_MAP_LOOKUP_ELEM. It is necessary for user space to maintain mapping from build id to binary files. This mostly static mapping is much easier to maintain than per process address maps. Note: Stackmap with build_id only works in non-nmi context at this time. This is because we need to take mm->mmap_sem for find_vma(). If this changes, we would like to allow build_id lookup in nmi context. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-14 20:23:21 +03:00
/*
bpf/stackmap: Fix deadlock with rq_lock in bpf_get_stack() bpf stackmap with build-id lookup (BPF_F_STACK_BUILD_ID) can trigger A-A deadlock on rq_lock(): rcu: INFO: rcu_sched detected stalls on CPUs/tasks: [...] Call Trace: try_to_wake_up+0x1ad/0x590 wake_up_q+0x54/0x80 rwsem_wake+0x8a/0xb0 bpf_get_stack+0x13c/0x150 bpf_prog_fbdaf42eded9fe46_on_event+0x5e3/0x1000 bpf_overflow_handler+0x60/0x100 __perf_event_overflow+0x4f/0xf0 perf_swevent_overflow+0x99/0xc0 ___perf_sw_event+0xe7/0x120 __schedule+0x47d/0x620 schedule+0x29/0x90 futex_wait_queue_me+0xb9/0x110 futex_wait+0x139/0x230 do_futex+0x2ac/0xa50 __x64_sys_futex+0x13c/0x180 do_syscall_64+0x42/0x100 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This can be reproduced by: 1. Start a multi-thread program that does parallel mmap() and malloc(); 2. taskset the program to 2 CPUs; 3. Attach bpf program to trace_sched_switch and gather stackmap with build-id, e.g. with trace.py from bcc tools: trace.py -U -p <pid> -s <some-bin,some-lib> t:sched:sched_switch A sample reproducer is attached at the end. This could also trigger deadlock with other locks that are nested with rq_lock. Fix this by checking whether irqs are disabled. Since rq_lock and all other nested locks are irq safe, it is safe to do up_read() when irqs are not disable. If the irqs are disabled, postpone up_read() in irq_work. Fixes: 615755a77b24 ("bpf: extend stackmap to save binary_build_id+offset instead of address") Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191014171223.357174-1-songliubraving@fb.com Reproducer: ============================ 8< ============================ char *filename; void *worker(void *p) { void *ptr; int fd; char *pptr; fd = open(filename, O_RDONLY); if (fd < 0) return NULL; while (1) { struct timespec ts = {0, 1000 + rand() % 2000}; ptr = mmap(NULL, 4096 * 64, PROT_READ, MAP_PRIVATE, fd, 0); usleep(1); if (ptr == MAP_FAILED) { printf("failed to mmap\n"); break; } munmap(ptr, 4096 * 64); usleep(1); pptr = malloc(1); usleep(1); pptr[0] = 1; usleep(1); free(pptr); usleep(1); nanosleep(&ts, NULL); } close(fd); return NULL; } int main(int argc, char *argv[]) { void *ptr; int i; pthread_t threads[THREAD_COUNT]; if (argc < 2) return 0; filename = argv[1]; for (i = 0; i < THREAD_COUNT; i++) { if (pthread_create(threads + i, NULL, worker, NULL)) { fprintf(stderr, "Error creating thread\n"); return 0; } } for (i = 0; i < THREAD_COUNT; i++) pthread_join(threads[i], NULL); return 0; } ============================ 8< ============================
2019-10-14 20:12:23 +03:00
* We cannot do up_read() when the irq is disabled, because of
* risk to deadlock with rq_lock. To do build_id lookup when the
* irqs are disabled, we need to run up_read() in irq_work. We use
* a percpu variable to do the irq_work. If the irq_work is
* already used by another lookup, we fall back to report ips.
bpf: extend stackmap to save binary_build_id+offset instead of address Currently, bpf stackmap store address for each entry in the call trace. To map these addresses to user space files, it is necessary to maintain the mapping from these virtual address to symbols in the binary. Usually, the user space profiler (such as perf) has to scan /proc/pid/maps at the beginning of profiling, and monitor mmap2() calls afterwards. Given the cost of maintaining the address map, this solution is not practical for system wide profiling that is always on. This patch tries to solve this problem with a variation of stackmap. This variation is enabled by flag BPF_F_STACK_BUILD_ID. Instead of storing addresses, the variation stores ELF file build_id + offset. Build ID is a 20-byte unique identifier for ELF files. The following command shows the Build ID of /bin/bash: [user@]$ readelf -n /bin/bash ... Build ID: XXXXXXXXXX ... With BPF_F_STACK_BUILD_ID, bpf_get_stackid() tries to parse Build ID for each entry in the call trace, and translate it into the following struct: struct bpf_stack_build_id_offset { __s32 status; unsigned char build_id[BPF_BUILD_ID_SIZE]; union { __u64 offset; __u64 ip; }; }; The search of build_id is limited to the first page of the file, and this page should be in page cache. Otherwise, we fallback to store ip for this entry (ip field in struct bpf_stack_build_id_offset). This requires the build_id to be stored in the first page. A quick survey of binary and dynamic library files in a few different systems shows that almost all binary and dynamic library files have build_id in the first page. Build_id is only meaningful for user stack. If a kernel stack is added to a stackmap with BPF_F_STACK_BUILD_ID, it will automatically fallback to only store ip (status == BPF_STACK_BUILD_ID_IP). Similarly, if build_id lookup failed for some reason, it will also fallback to store ip. User space can access struct bpf_stack_build_id_offset with bpf syscall BPF_MAP_LOOKUP_ELEM. It is necessary for user space to maintain mapping from build id to binary files. This mostly static mapping is much easier to maintain than per process address maps. Note: Stackmap with build_id only works in non-nmi context at this time. This is because we need to take mm->mmap_sem for find_vma(). If this changes, we would like to allow build_id lookup in nmi context. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-14 20:23:21 +03:00
*
* Same fallback is used for kernel stack (!user) on a stackmap
* with build_id.
*/
if (!user || !current || !current->mm || irq_work_busy ||
!mmap_read_trylock_non_owner(current->mm)) {
bpf: extend stackmap to save binary_build_id+offset instead of address Currently, bpf stackmap store address for each entry in the call trace. To map these addresses to user space files, it is necessary to maintain the mapping from these virtual address to symbols in the binary. Usually, the user space profiler (such as perf) has to scan /proc/pid/maps at the beginning of profiling, and monitor mmap2() calls afterwards. Given the cost of maintaining the address map, this solution is not practical for system wide profiling that is always on. This patch tries to solve this problem with a variation of stackmap. This variation is enabled by flag BPF_F_STACK_BUILD_ID. Instead of storing addresses, the variation stores ELF file build_id + offset. Build ID is a 20-byte unique identifier for ELF files. The following command shows the Build ID of /bin/bash: [user@]$ readelf -n /bin/bash ... Build ID: XXXXXXXXXX ... With BPF_F_STACK_BUILD_ID, bpf_get_stackid() tries to parse Build ID for each entry in the call trace, and translate it into the following struct: struct bpf_stack_build_id_offset { __s32 status; unsigned char build_id[BPF_BUILD_ID_SIZE]; union { __u64 offset; __u64 ip; }; }; The search of build_id is limited to the first page of the file, and this page should be in page cache. Otherwise, we fallback to store ip for this entry (ip field in struct bpf_stack_build_id_offset). This requires the build_id to be stored in the first page. A quick survey of binary and dynamic library files in a few different systems shows that almost all binary and dynamic library files have build_id in the first page. Build_id is only meaningful for user stack. If a kernel stack is added to a stackmap with BPF_F_STACK_BUILD_ID, it will automatically fallback to only store ip (status == BPF_STACK_BUILD_ID_IP). Similarly, if build_id lookup failed for some reason, it will also fallback to store ip. User space can access struct bpf_stack_build_id_offset with bpf syscall BPF_MAP_LOOKUP_ELEM. It is necessary for user space to maintain mapping from build id to binary files. This mostly static mapping is much easier to maintain than per process address maps. Note: Stackmap with build_id only works in non-nmi context at this time. This is because we need to take mm->mmap_sem for find_vma(). If this changes, we would like to allow build_id lookup in nmi context. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-14 20:23:21 +03:00
/* cannot access current->mm, fall back to ips */
for (i = 0; i < trace_nr; i++) {
id_offs[i].status = BPF_STACK_BUILD_ID_IP;
id_offs[i].ip = ips[i];
memset(id_offs[i].build_id, 0, BUILD_ID_SIZE_MAX);
bpf: extend stackmap to save binary_build_id+offset instead of address Currently, bpf stackmap store address for each entry in the call trace. To map these addresses to user space files, it is necessary to maintain the mapping from these virtual address to symbols in the binary. Usually, the user space profiler (such as perf) has to scan /proc/pid/maps at the beginning of profiling, and monitor mmap2() calls afterwards. Given the cost of maintaining the address map, this solution is not practical for system wide profiling that is always on. This patch tries to solve this problem with a variation of stackmap. This variation is enabled by flag BPF_F_STACK_BUILD_ID. Instead of storing addresses, the variation stores ELF file build_id + offset. Build ID is a 20-byte unique identifier for ELF files. The following command shows the Build ID of /bin/bash: [user@]$ readelf -n /bin/bash ... Build ID: XXXXXXXXXX ... With BPF_F_STACK_BUILD_ID, bpf_get_stackid() tries to parse Build ID for each entry in the call trace, and translate it into the following struct: struct bpf_stack_build_id_offset { __s32 status; unsigned char build_id[BPF_BUILD_ID_SIZE]; union { __u64 offset; __u64 ip; }; }; The search of build_id is limited to the first page of the file, and this page should be in page cache. Otherwise, we fallback to store ip for this entry (ip field in struct bpf_stack_build_id_offset). This requires the build_id to be stored in the first page. A quick survey of binary and dynamic library files in a few different systems shows that almost all binary and dynamic library files have build_id in the first page. Build_id is only meaningful for user stack. If a kernel stack is added to a stackmap with BPF_F_STACK_BUILD_ID, it will automatically fallback to only store ip (status == BPF_STACK_BUILD_ID_IP). Similarly, if build_id lookup failed for some reason, it will also fallback to store ip. User space can access struct bpf_stack_build_id_offset with bpf syscall BPF_MAP_LOOKUP_ELEM. It is necessary for user space to maintain mapping from build id to binary files. This mostly static mapping is much easier to maintain than per process address maps. Note: Stackmap with build_id only works in non-nmi context at this time. This is because we need to take mm->mmap_sem for find_vma(). If this changes, we would like to allow build_id lookup in nmi context. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-14 20:23:21 +03:00
}
return;
}
for (i = 0; i < trace_nr; i++) {
vma = find_vma(current->mm, ips[i]);
if (!vma || build_id_parse(vma, id_offs[i].build_id, NULL)) {
bpf: extend stackmap to save binary_build_id+offset instead of address Currently, bpf stackmap store address for each entry in the call trace. To map these addresses to user space files, it is necessary to maintain the mapping from these virtual address to symbols in the binary. Usually, the user space profiler (such as perf) has to scan /proc/pid/maps at the beginning of profiling, and monitor mmap2() calls afterwards. Given the cost of maintaining the address map, this solution is not practical for system wide profiling that is always on. This patch tries to solve this problem with a variation of stackmap. This variation is enabled by flag BPF_F_STACK_BUILD_ID. Instead of storing addresses, the variation stores ELF file build_id + offset. Build ID is a 20-byte unique identifier for ELF files. The following command shows the Build ID of /bin/bash: [user@]$ readelf -n /bin/bash ... Build ID: XXXXXXXXXX ... With BPF_F_STACK_BUILD_ID, bpf_get_stackid() tries to parse Build ID for each entry in the call trace, and translate it into the following struct: struct bpf_stack_build_id_offset { __s32 status; unsigned char build_id[BPF_BUILD_ID_SIZE]; union { __u64 offset; __u64 ip; }; }; The search of build_id is limited to the first page of the file, and this page should be in page cache. Otherwise, we fallback to store ip for this entry (ip field in struct bpf_stack_build_id_offset). This requires the build_id to be stored in the first page. A quick survey of binary and dynamic library files in a few different systems shows that almost all binary and dynamic library files have build_id in the first page. Build_id is only meaningful for user stack. If a kernel stack is added to a stackmap with BPF_F_STACK_BUILD_ID, it will automatically fallback to only store ip (status == BPF_STACK_BUILD_ID_IP). Similarly, if build_id lookup failed for some reason, it will also fallback to store ip. User space can access struct bpf_stack_build_id_offset with bpf syscall BPF_MAP_LOOKUP_ELEM. It is necessary for user space to maintain mapping from build id to binary files. This mostly static mapping is much easier to maintain than per process address maps. Note: Stackmap with build_id only works in non-nmi context at this time. This is because we need to take mm->mmap_sem for find_vma(). If this changes, we would like to allow build_id lookup in nmi context. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-14 20:23:21 +03:00
/* per entry fall back to ips */
id_offs[i].status = BPF_STACK_BUILD_ID_IP;
id_offs[i].ip = ips[i];
memset(id_offs[i].build_id, 0, BUILD_ID_SIZE_MAX);
bpf: extend stackmap to save binary_build_id+offset instead of address Currently, bpf stackmap store address for each entry in the call trace. To map these addresses to user space files, it is necessary to maintain the mapping from these virtual address to symbols in the binary. Usually, the user space profiler (such as perf) has to scan /proc/pid/maps at the beginning of profiling, and monitor mmap2() calls afterwards. Given the cost of maintaining the address map, this solution is not practical for system wide profiling that is always on. This patch tries to solve this problem with a variation of stackmap. This variation is enabled by flag BPF_F_STACK_BUILD_ID. Instead of storing addresses, the variation stores ELF file build_id + offset. Build ID is a 20-byte unique identifier for ELF files. The following command shows the Build ID of /bin/bash: [user@]$ readelf -n /bin/bash ... Build ID: XXXXXXXXXX ... With BPF_F_STACK_BUILD_ID, bpf_get_stackid() tries to parse Build ID for each entry in the call trace, and translate it into the following struct: struct bpf_stack_build_id_offset { __s32 status; unsigned char build_id[BPF_BUILD_ID_SIZE]; union { __u64 offset; __u64 ip; }; }; The search of build_id is limited to the first page of the file, and this page should be in page cache. Otherwise, we fallback to store ip for this entry (ip field in struct bpf_stack_build_id_offset). This requires the build_id to be stored in the first page. A quick survey of binary and dynamic library files in a few different systems shows that almost all binary and dynamic library files have build_id in the first page. Build_id is only meaningful for user stack. If a kernel stack is added to a stackmap with BPF_F_STACK_BUILD_ID, it will automatically fallback to only store ip (status == BPF_STACK_BUILD_ID_IP). Similarly, if build_id lookup failed for some reason, it will also fallback to store ip. User space can access struct bpf_stack_build_id_offset with bpf syscall BPF_MAP_LOOKUP_ELEM. It is necessary for user space to maintain mapping from build id to binary files. This mostly static mapping is much easier to maintain than per process address maps. Note: Stackmap with build_id only works in non-nmi context at this time. This is because we need to take mm->mmap_sem for find_vma(). If this changes, we would like to allow build_id lookup in nmi context. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-14 20:23:21 +03:00
continue;
}
id_offs[i].offset = (vma->vm_pgoff << PAGE_SHIFT) + ips[i]
- vma->vm_start;
id_offs[i].status = BPF_STACK_BUILD_ID_VALID;
}
if (!work) {
mmap_read_unlock_non_owner(current->mm);
} else {
work->mm = current->mm;
irq_work_queue(&work->irq_work);
}
bpf: extend stackmap to save binary_build_id+offset instead of address Currently, bpf stackmap store address for each entry in the call trace. To map these addresses to user space files, it is necessary to maintain the mapping from these virtual address to symbols in the binary. Usually, the user space profiler (such as perf) has to scan /proc/pid/maps at the beginning of profiling, and monitor mmap2() calls afterwards. Given the cost of maintaining the address map, this solution is not practical for system wide profiling that is always on. This patch tries to solve this problem with a variation of stackmap. This variation is enabled by flag BPF_F_STACK_BUILD_ID. Instead of storing addresses, the variation stores ELF file build_id + offset. Build ID is a 20-byte unique identifier for ELF files. The following command shows the Build ID of /bin/bash: [user@]$ readelf -n /bin/bash ... Build ID: XXXXXXXXXX ... With BPF_F_STACK_BUILD_ID, bpf_get_stackid() tries to parse Build ID for each entry in the call trace, and translate it into the following struct: struct bpf_stack_build_id_offset { __s32 status; unsigned char build_id[BPF_BUILD_ID_SIZE]; union { __u64 offset; __u64 ip; }; }; The search of build_id is limited to the first page of the file, and this page should be in page cache. Otherwise, we fallback to store ip for this entry (ip field in struct bpf_stack_build_id_offset). This requires the build_id to be stored in the first page. A quick survey of binary and dynamic library files in a few different systems shows that almost all binary and dynamic library files have build_id in the first page. Build_id is only meaningful for user stack. If a kernel stack is added to a stackmap with BPF_F_STACK_BUILD_ID, it will automatically fallback to only store ip (status == BPF_STACK_BUILD_ID_IP). Similarly, if build_id lookup failed for some reason, it will also fallback to store ip. User space can access struct bpf_stack_build_id_offset with bpf syscall BPF_MAP_LOOKUP_ELEM. It is necessary for user space to maintain mapping from build id to binary files. This mostly static mapping is much easier to maintain than per process address maps. Note: Stackmap with build_id only works in non-nmi context at this time. This is because we need to take mm->mmap_sem for find_vma(). If this changes, we would like to allow build_id lookup in nmi context. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-14 20:23:21 +03:00
}
static struct perf_callchain_entry *
get_callchain_entry_for_task(struct task_struct *task, u32 init_nr)
{
#ifdef CONFIG_STACKTRACE
struct perf_callchain_entry *entry;
int rctx;
entry = get_callchain_entry(&rctx);
if (!entry)
return NULL;
entry->nr = init_nr +
stack_trace_save_tsk(task, (unsigned long *)(entry->ip + init_nr),
sysctl_perf_event_max_stack - init_nr, 0);
/* stack_trace_save_tsk() works on unsigned long array, while
* perf_callchain_entry uses u64 array. For 32-bit systems, it is
* necessary to fix this mismatch.
*/
if (__BITS_PER_LONG != 64) {
unsigned long *from = (unsigned long *) entry->ip;
u64 *to = entry->ip;
int i;
/* copy data from the end to avoid using extra buffer */
for (i = entry->nr - 1; i >= (int)init_nr; i--)
to[i] = (u64)(from[i]);
}
put_callchain_entry(rctx);
return entry;
#else /* CONFIG_STACKTRACE */
return NULL;
#endif
}
static long __bpf_get_stackid(struct bpf_map *map,
struct perf_callchain_entry *trace, u64 flags)
{
struct bpf_stack_map *smap = container_of(map, struct bpf_stack_map, map);
struct stack_map_bucket *bucket, *new_bucket, *old_bucket;
bpf: extend stackmap to save binary_build_id+offset instead of address Currently, bpf stackmap store address for each entry in the call trace. To map these addresses to user space files, it is necessary to maintain the mapping from these virtual address to symbols in the binary. Usually, the user space profiler (such as perf) has to scan /proc/pid/maps at the beginning of profiling, and monitor mmap2() calls afterwards. Given the cost of maintaining the address map, this solution is not practical for system wide profiling that is always on. This patch tries to solve this problem with a variation of stackmap. This variation is enabled by flag BPF_F_STACK_BUILD_ID. Instead of storing addresses, the variation stores ELF file build_id + offset. Build ID is a 20-byte unique identifier for ELF files. The following command shows the Build ID of /bin/bash: [user@]$ readelf -n /bin/bash ... Build ID: XXXXXXXXXX ... With BPF_F_STACK_BUILD_ID, bpf_get_stackid() tries to parse Build ID for each entry in the call trace, and translate it into the following struct: struct bpf_stack_build_id_offset { __s32 status; unsigned char build_id[BPF_BUILD_ID_SIZE]; union { __u64 offset; __u64 ip; }; }; The search of build_id is limited to the first page of the file, and this page should be in page cache. Otherwise, we fallback to store ip for this entry (ip field in struct bpf_stack_build_id_offset). This requires the build_id to be stored in the first page. A quick survey of binary and dynamic library files in a few different systems shows that almost all binary and dynamic library files have build_id in the first page. Build_id is only meaningful for user stack. If a kernel stack is added to a stackmap with BPF_F_STACK_BUILD_ID, it will automatically fallback to only store ip (status == BPF_STACK_BUILD_ID_IP). Similarly, if build_id lookup failed for some reason, it will also fallback to store ip. User space can access struct bpf_stack_build_id_offset with bpf syscall BPF_MAP_LOOKUP_ELEM. It is necessary for user space to maintain mapping from build id to binary files. This mostly static mapping is much easier to maintain than per process address maps. Note: Stackmap with build_id only works in non-nmi context at this time. This is because we need to take mm->mmap_sem for find_vma(). If this changes, we would like to allow build_id lookup in nmi context. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-14 20:23:21 +03:00
u32 max_depth = map->value_size / stack_map_data_size(map);
perf core: Allow setting up max frame stack depth via sysctl The default remains 127, which is good for most cases, and not even hit most of the time, but then for some cases, as reported by Brendan, 1024+ deep frames are appearing on the radar for things like groovy, ruby. And in some workloads putting a _lower_ cap on this may make sense. One that is per event still needs to be put in place tho. The new file is: # cat /proc/sys/kernel/perf_event_max_stack 127 Chaging it: # echo 256 > /proc/sys/kernel/perf_event_max_stack # cat /proc/sys/kernel/perf_event_max_stack 256 But as soon as there is some event using callchains we get: # echo 512 > /proc/sys/kernel/perf_event_max_stack -bash: echo: write error: Device or resource busy # Because we only allocate the callchain percpu data structures when there is a user, which allows for changing the max easily, its just a matter of having no callchain users at that point. Reported-and-Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com> Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/20160426002928.GB16708@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-21 18:28:50 +03:00
/* stack_map_alloc() checks that max_depth <= sysctl_perf_event_max_stack */
u32 init_nr = sysctl_perf_event_max_stack - max_depth;
u32 skip = flags & BPF_F_SKIP_FIELD_MASK;
u32 hash, id, trace_nr, trace_len;
bool user = flags & BPF_F_USER_STACK;
u64 *ips;
bpf: extend stackmap to save binary_build_id+offset instead of address Currently, bpf stackmap store address for each entry in the call trace. To map these addresses to user space files, it is necessary to maintain the mapping from these virtual address to symbols in the binary. Usually, the user space profiler (such as perf) has to scan /proc/pid/maps at the beginning of profiling, and monitor mmap2() calls afterwards. Given the cost of maintaining the address map, this solution is not practical for system wide profiling that is always on. This patch tries to solve this problem with a variation of stackmap. This variation is enabled by flag BPF_F_STACK_BUILD_ID. Instead of storing addresses, the variation stores ELF file build_id + offset. Build ID is a 20-byte unique identifier for ELF files. The following command shows the Build ID of /bin/bash: [user@]$ readelf -n /bin/bash ... Build ID: XXXXXXXXXX ... With BPF_F_STACK_BUILD_ID, bpf_get_stackid() tries to parse Build ID for each entry in the call trace, and translate it into the following struct: struct bpf_stack_build_id_offset { __s32 status; unsigned char build_id[BPF_BUILD_ID_SIZE]; union { __u64 offset; __u64 ip; }; }; The search of build_id is limited to the first page of the file, and this page should be in page cache. Otherwise, we fallback to store ip for this entry (ip field in struct bpf_stack_build_id_offset). This requires the build_id to be stored in the first page. A quick survey of binary and dynamic library files in a few different systems shows that almost all binary and dynamic library files have build_id in the first page. Build_id is only meaningful for user stack. If a kernel stack is added to a stackmap with BPF_F_STACK_BUILD_ID, it will automatically fallback to only store ip (status == BPF_STACK_BUILD_ID_IP). Similarly, if build_id lookup failed for some reason, it will also fallback to store ip. User space can access struct bpf_stack_build_id_offset with bpf syscall BPF_MAP_LOOKUP_ELEM. It is necessary for user space to maintain mapping from build id to binary files. This mostly static mapping is much easier to maintain than per process address maps. Note: Stackmap with build_id only works in non-nmi context at this time. This is because we need to take mm->mmap_sem for find_vma(). If this changes, we would like to allow build_id lookup in nmi context. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-14 20:23:21 +03:00
bool hash_matches;
/* get_perf_callchain() guarantees that trace->nr >= init_nr
perf core: Allow setting up max frame stack depth via sysctl The default remains 127, which is good for most cases, and not even hit most of the time, but then for some cases, as reported by Brendan, 1024+ deep frames are appearing on the radar for things like groovy, ruby. And in some workloads putting a _lower_ cap on this may make sense. One that is per event still needs to be put in place tho. The new file is: # cat /proc/sys/kernel/perf_event_max_stack 127 Chaging it: # echo 256 > /proc/sys/kernel/perf_event_max_stack # cat /proc/sys/kernel/perf_event_max_stack 256 But as soon as there is some event using callchains we get: # echo 512 > /proc/sys/kernel/perf_event_max_stack -bash: echo: write error: Device or resource busy # Because we only allocate the callchain percpu data structures when there is a user, which allows for changing the max easily, its just a matter of having no callchain users at that point. Reported-and-Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com> Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/20160426002928.GB16708@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-21 18:28:50 +03:00
* and trace-nr <= sysctl_perf_event_max_stack, so trace_nr <= max_depth
*/
trace_nr = trace->nr - init_nr;
if (trace_nr <= skip)
/* skipping more than usable stack trace */
return -EFAULT;
trace_nr -= skip;
trace_len = trace_nr * sizeof(u64);
ips = trace->ip + skip + init_nr;
hash = jhash2((u32 *)ips, trace_len / sizeof(u32), 0);
id = hash & (smap->n_buckets - 1);
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 08:57:17 +03:00
bucket = READ_ONCE(smap->buckets[id]);
bpf: extend stackmap to save binary_build_id+offset instead of address Currently, bpf stackmap store address for each entry in the call trace. To map these addresses to user space files, it is necessary to maintain the mapping from these virtual address to symbols in the binary. Usually, the user space profiler (such as perf) has to scan /proc/pid/maps at the beginning of profiling, and monitor mmap2() calls afterwards. Given the cost of maintaining the address map, this solution is not practical for system wide profiling that is always on. This patch tries to solve this problem with a variation of stackmap. This variation is enabled by flag BPF_F_STACK_BUILD_ID. Instead of storing addresses, the variation stores ELF file build_id + offset. Build ID is a 20-byte unique identifier for ELF files. The following command shows the Build ID of /bin/bash: [user@]$ readelf -n /bin/bash ... Build ID: XXXXXXXXXX ... With BPF_F_STACK_BUILD_ID, bpf_get_stackid() tries to parse Build ID for each entry in the call trace, and translate it into the following struct: struct bpf_stack_build_id_offset { __s32 status; unsigned char build_id[BPF_BUILD_ID_SIZE]; union { __u64 offset; __u64 ip; }; }; The search of build_id is limited to the first page of the file, and this page should be in page cache. Otherwise, we fallback to store ip for this entry (ip field in struct bpf_stack_build_id_offset). This requires the build_id to be stored in the first page. A quick survey of binary and dynamic library files in a few different systems shows that almost all binary and dynamic library files have build_id in the first page. Build_id is only meaningful for user stack. If a kernel stack is added to a stackmap with BPF_F_STACK_BUILD_ID, it will automatically fallback to only store ip (status == BPF_STACK_BUILD_ID_IP). Similarly, if build_id lookup failed for some reason, it will also fallback to store ip. User space can access struct bpf_stack_build_id_offset with bpf syscall BPF_MAP_LOOKUP_ELEM. It is necessary for user space to maintain mapping from build id to binary files. This mostly static mapping is much easier to maintain than per process address maps. Note: Stackmap with build_id only works in non-nmi context at this time. This is because we need to take mm->mmap_sem for find_vma(). If this changes, we would like to allow build_id lookup in nmi context. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-14 20:23:21 +03:00
hash_matches = bucket && bucket->hash == hash;
/* fast cmp */
if (hash_matches && flags & BPF_F_FAST_STACK_CMP)
return id;
if (stack_map_use_build_id(map)) {
/* for build_id+offset, pop a bucket before slow cmp */
new_bucket = (struct stack_map_bucket *)
pcpu_freelist_pop(&smap->freelist);
if (unlikely(!new_bucket))
return -ENOMEM;
new_bucket->nr = trace_nr;
stack_map_get_build_id_offset(
(struct bpf_stack_build_id *)new_bucket->data,
ips, trace_nr, user);
bpf: extend stackmap to save binary_build_id+offset instead of address Currently, bpf stackmap store address for each entry in the call trace. To map these addresses to user space files, it is necessary to maintain the mapping from these virtual address to symbols in the binary. Usually, the user space profiler (such as perf) has to scan /proc/pid/maps at the beginning of profiling, and monitor mmap2() calls afterwards. Given the cost of maintaining the address map, this solution is not practical for system wide profiling that is always on. This patch tries to solve this problem with a variation of stackmap. This variation is enabled by flag BPF_F_STACK_BUILD_ID. Instead of storing addresses, the variation stores ELF file build_id + offset. Build ID is a 20-byte unique identifier for ELF files. The following command shows the Build ID of /bin/bash: [user@]$ readelf -n /bin/bash ... Build ID: XXXXXXXXXX ... With BPF_F_STACK_BUILD_ID, bpf_get_stackid() tries to parse Build ID for each entry in the call trace, and translate it into the following struct: struct bpf_stack_build_id_offset { __s32 status; unsigned char build_id[BPF_BUILD_ID_SIZE]; union { __u64 offset; __u64 ip; }; }; The search of build_id is limited to the first page of the file, and this page should be in page cache. Otherwise, we fallback to store ip for this entry (ip field in struct bpf_stack_build_id_offset). This requires the build_id to be stored in the first page. A quick survey of binary and dynamic library files in a few different systems shows that almost all binary and dynamic library files have build_id in the first page. Build_id is only meaningful for user stack. If a kernel stack is added to a stackmap with BPF_F_STACK_BUILD_ID, it will automatically fallback to only store ip (status == BPF_STACK_BUILD_ID_IP). Similarly, if build_id lookup failed for some reason, it will also fallback to store ip. User space can access struct bpf_stack_build_id_offset with bpf syscall BPF_MAP_LOOKUP_ELEM. It is necessary for user space to maintain mapping from build id to binary files. This mostly static mapping is much easier to maintain than per process address maps. Note: Stackmap with build_id only works in non-nmi context at this time. This is because we need to take mm->mmap_sem for find_vma(). If this changes, we would like to allow build_id lookup in nmi context. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-14 20:23:21 +03:00
trace_len = trace_nr * sizeof(struct bpf_stack_build_id);
if (hash_matches && bucket->nr == trace_nr &&
memcmp(bucket->data, new_bucket->data, trace_len) == 0) {
pcpu_freelist_push(&smap->freelist, &new_bucket->fnode);
return id;
bpf: extend stackmap to save binary_build_id+offset instead of address Currently, bpf stackmap store address for each entry in the call trace. To map these addresses to user space files, it is necessary to maintain the mapping from these virtual address to symbols in the binary. Usually, the user space profiler (such as perf) has to scan /proc/pid/maps at the beginning of profiling, and monitor mmap2() calls afterwards. Given the cost of maintaining the address map, this solution is not practical for system wide profiling that is always on. This patch tries to solve this problem with a variation of stackmap. This variation is enabled by flag BPF_F_STACK_BUILD_ID. Instead of storing addresses, the variation stores ELF file build_id + offset. Build ID is a 20-byte unique identifier for ELF files. The following command shows the Build ID of /bin/bash: [user@]$ readelf -n /bin/bash ... Build ID: XXXXXXXXXX ... With BPF_F_STACK_BUILD_ID, bpf_get_stackid() tries to parse Build ID for each entry in the call trace, and translate it into the following struct: struct bpf_stack_build_id_offset { __s32 status; unsigned char build_id[BPF_BUILD_ID_SIZE]; union { __u64 offset; __u64 ip; }; }; The search of build_id is limited to the first page of the file, and this page should be in page cache. Otherwise, we fallback to store ip for this entry (ip field in struct bpf_stack_build_id_offset). This requires the build_id to be stored in the first page. A quick survey of binary and dynamic library files in a few different systems shows that almost all binary and dynamic library files have build_id in the first page. Build_id is only meaningful for user stack. If a kernel stack is added to a stackmap with BPF_F_STACK_BUILD_ID, it will automatically fallback to only store ip (status == BPF_STACK_BUILD_ID_IP). Similarly, if build_id lookup failed for some reason, it will also fallback to store ip. User space can access struct bpf_stack_build_id_offset with bpf syscall BPF_MAP_LOOKUP_ELEM. It is necessary for user space to maintain mapping from build id to binary files. This mostly static mapping is much easier to maintain than per process address maps. Note: Stackmap with build_id only works in non-nmi context at this time. This is because we need to take mm->mmap_sem for find_vma(). If this changes, we would like to allow build_id lookup in nmi context. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-14 20:23:21 +03:00
}
if (bucket && !(flags & BPF_F_REUSE_STACKID)) {
pcpu_freelist_push(&smap->freelist, &new_bucket->fnode);
return -EEXIST;
}
} else {
if (hash_matches && bucket->nr == trace_nr &&
memcmp(bucket->data, ips, trace_len) == 0)
return id;
bpf: extend stackmap to save binary_build_id+offset instead of address Currently, bpf stackmap store address for each entry in the call trace. To map these addresses to user space files, it is necessary to maintain the mapping from these virtual address to symbols in the binary. Usually, the user space profiler (such as perf) has to scan /proc/pid/maps at the beginning of profiling, and monitor mmap2() calls afterwards. Given the cost of maintaining the address map, this solution is not practical for system wide profiling that is always on. This patch tries to solve this problem with a variation of stackmap. This variation is enabled by flag BPF_F_STACK_BUILD_ID. Instead of storing addresses, the variation stores ELF file build_id + offset. Build ID is a 20-byte unique identifier for ELF files. The following command shows the Build ID of /bin/bash: [user@]$ readelf -n /bin/bash ... Build ID: XXXXXXXXXX ... With BPF_F_STACK_BUILD_ID, bpf_get_stackid() tries to parse Build ID for each entry in the call trace, and translate it into the following struct: struct bpf_stack_build_id_offset { __s32 status; unsigned char build_id[BPF_BUILD_ID_SIZE]; union { __u64 offset; __u64 ip; }; }; The search of build_id is limited to the first page of the file, and this page should be in page cache. Otherwise, we fallback to store ip for this entry (ip field in struct bpf_stack_build_id_offset). This requires the build_id to be stored in the first page. A quick survey of binary and dynamic library files in a few different systems shows that almost all binary and dynamic library files have build_id in the first page. Build_id is only meaningful for user stack. If a kernel stack is added to a stackmap with BPF_F_STACK_BUILD_ID, it will automatically fallback to only store ip (status == BPF_STACK_BUILD_ID_IP). Similarly, if build_id lookup failed for some reason, it will also fallback to store ip. User space can access struct bpf_stack_build_id_offset with bpf syscall BPF_MAP_LOOKUP_ELEM. It is necessary for user space to maintain mapping from build id to binary files. This mostly static mapping is much easier to maintain than per process address maps. Note: Stackmap with build_id only works in non-nmi context at this time. This is because we need to take mm->mmap_sem for find_vma(). If this changes, we would like to allow build_id lookup in nmi context. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-14 20:23:21 +03:00
if (bucket && !(flags & BPF_F_REUSE_STACKID))
return -EEXIST;
new_bucket = (struct stack_map_bucket *)
pcpu_freelist_pop(&smap->freelist);
if (unlikely(!new_bucket))
return -ENOMEM;
memcpy(new_bucket->data, ips, trace_len);
}
new_bucket->hash = hash;
new_bucket->nr = trace_nr;
old_bucket = xchg(&smap->buckets[id], new_bucket);
if (old_bucket)
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 08:57:17 +03:00
pcpu_freelist_push(&smap->freelist, &old_bucket->fnode);
return id;
}
BPF_CALL_3(bpf_get_stackid, struct pt_regs *, regs, struct bpf_map *, map,
u64, flags)
{
u32 max_depth = map->value_size / stack_map_data_size(map);
/* stack_map_alloc() checks that max_depth <= sysctl_perf_event_max_stack */
u32 init_nr = sysctl_perf_event_max_stack - max_depth;
bool user = flags & BPF_F_USER_STACK;
struct perf_callchain_entry *trace;
bool kernel = !user;
if (unlikely(flags & ~(BPF_F_SKIP_FIELD_MASK | BPF_F_USER_STACK |
BPF_F_FAST_STACK_CMP | BPF_F_REUSE_STACKID)))
return -EINVAL;
trace = get_perf_callchain(regs, init_nr, kernel, user,
sysctl_perf_event_max_stack, false, false);
if (unlikely(!trace))
/* couldn't fetch the stack trace */
return -EFAULT;
return __bpf_get_stackid(map, trace, flags);
}
const struct bpf_func_proto bpf_get_stackid_proto = {
.func = bpf_get_stackid,
.gpl_only = true,
.ret_type = RET_INTEGER,
.arg1_type = ARG_PTR_TO_CTX,
.arg2_type = ARG_CONST_MAP_PTR,
.arg3_type = ARG_ANYTHING,
};
static __u64 count_kernel_ip(struct perf_callchain_entry *trace)
{
__u64 nr_kernel = 0;
while (nr_kernel < trace->nr) {
if (trace->ip[nr_kernel] == PERF_CONTEXT_USER)
break;
nr_kernel++;
}
return nr_kernel;
}
BPF_CALL_3(bpf_get_stackid_pe, struct bpf_perf_event_data_kern *, ctx,
struct bpf_map *, map, u64, flags)
{
struct perf_event *event = ctx->event;
struct perf_callchain_entry *trace;
bool kernel, user;
__u64 nr_kernel;
int ret;
/* perf_sample_data doesn't have callchain, use bpf_get_stackid */
if (!(event->attr.sample_type & __PERF_SAMPLE_CALLCHAIN_EARLY))
return bpf_get_stackid((unsigned long)(ctx->regs),
(unsigned long) map, flags, 0, 0);
if (unlikely(flags & ~(BPF_F_SKIP_FIELD_MASK | BPF_F_USER_STACK |
BPF_F_FAST_STACK_CMP | BPF_F_REUSE_STACKID)))
return -EINVAL;
user = flags & BPF_F_USER_STACK;
kernel = !user;
trace = ctx->data->callchain;
if (unlikely(!trace))
return -EFAULT;
nr_kernel = count_kernel_ip(trace);
if (kernel) {
__u64 nr = trace->nr;
trace->nr = nr_kernel;
ret = __bpf_get_stackid(map, trace, flags);
/* restore nr */
trace->nr = nr;
} else { /* user */
u64 skip = flags & BPF_F_SKIP_FIELD_MASK;
skip += nr_kernel;
if (skip > BPF_F_SKIP_FIELD_MASK)
return -EFAULT;
flags = (flags & ~BPF_F_SKIP_FIELD_MASK) | skip;
ret = __bpf_get_stackid(map, trace, flags);
}
return ret;
}
const struct bpf_func_proto bpf_get_stackid_proto_pe = {
.func = bpf_get_stackid_pe,
.gpl_only = false,
.ret_type = RET_INTEGER,
.arg1_type = ARG_PTR_TO_CTX,
.arg2_type = ARG_CONST_MAP_PTR,
.arg3_type = ARG_ANYTHING,
};
static long __bpf_get_stack(struct pt_regs *regs, struct task_struct *task,
struct perf_callchain_entry *trace_in,
void *buf, u32 size, u64 flags)
{
u32 init_nr, trace_nr, copy_len, elem_size, num_elem;
bool user_build_id = flags & BPF_F_USER_BUILD_ID;
u32 skip = flags & BPF_F_SKIP_FIELD_MASK;
bool user = flags & BPF_F_USER_STACK;
struct perf_callchain_entry *trace;
bool kernel = !user;
int err = -EINVAL;
u64 *ips;
if (unlikely(flags & ~(BPF_F_SKIP_FIELD_MASK | BPF_F_USER_STACK |
BPF_F_USER_BUILD_ID)))
goto clear;
if (kernel && user_build_id)
goto clear;
elem_size = (user && user_build_id) ? sizeof(struct bpf_stack_build_id)
: sizeof(u64);
if (unlikely(size % elem_size))
goto clear;
/* cannot get valid user stack for task without user_mode regs */
if (task && user && !user_mode(regs))
goto err_fault;
num_elem = size / elem_size;
if (sysctl_perf_event_max_stack < num_elem)
init_nr = 0;
else
init_nr = sysctl_perf_event_max_stack - num_elem;
if (trace_in)
trace = trace_in;
else if (kernel && task)
trace = get_callchain_entry_for_task(task, init_nr);
else
trace = get_perf_callchain(regs, init_nr, kernel, user,
sysctl_perf_event_max_stack,
false, false);
if (unlikely(!trace))
goto err_fault;
trace_nr = trace->nr - init_nr;
if (trace_nr < skip)
goto err_fault;
trace_nr -= skip;
trace_nr = (trace_nr <= num_elem) ? trace_nr : num_elem;
copy_len = trace_nr * elem_size;
ips = trace->ip + skip + init_nr;
if (user && user_build_id)
stack_map_get_build_id_offset(buf, ips, trace_nr, user);
else
memcpy(buf, ips, copy_len);
if (size > copy_len)
memset(buf + copy_len, 0, size - copy_len);
return copy_len;
err_fault:
err = -EFAULT;
clear:
memset(buf, 0, size);
return err;
}
BPF_CALL_4(bpf_get_stack, struct pt_regs *, regs, void *, buf, u32, size,
u64, flags)
{
return __bpf_get_stack(regs, NULL, NULL, buf, size, flags);
}
const struct bpf_func_proto bpf_get_stack_proto = {
.func = bpf_get_stack,
.gpl_only = true,
.ret_type = RET_INTEGER,
.arg1_type = ARG_PTR_TO_CTX,
.arg2_type = ARG_PTR_TO_UNINIT_MEM,
.arg3_type = ARG_CONST_SIZE_OR_ZERO,
.arg4_type = ARG_ANYTHING,
};
BPF_CALL_4(bpf_get_task_stack, struct task_struct *, task, void *, buf,
u32, size, u64, flags)
{
struct pt_regs *regs = task_pt_regs(task);
return __bpf_get_stack(regs, task, NULL, buf, size, flags);
}
BTF_ID_LIST_SINGLE(bpf_get_task_stack_btf_ids, struct, task_struct)
const struct bpf_func_proto bpf_get_task_stack_proto = {
.func = bpf_get_task_stack,
.gpl_only = false,
.ret_type = RET_INTEGER,
.arg1_type = ARG_PTR_TO_BTF_ID,
.arg1_btf_id = &bpf_get_task_stack_btf_ids[0],
.arg2_type = ARG_PTR_TO_UNINIT_MEM,
.arg3_type = ARG_CONST_SIZE_OR_ZERO,
.arg4_type = ARG_ANYTHING,
};
BPF_CALL_4(bpf_get_stack_pe, struct bpf_perf_event_data_kern *, ctx,
void *, buf, u32, size, u64, flags)
{
struct pt_regs *regs = (struct pt_regs *)(ctx->regs);
struct perf_event *event = ctx->event;
struct perf_callchain_entry *trace;
bool kernel, user;
int err = -EINVAL;
__u64 nr_kernel;
if (!(event->attr.sample_type & __PERF_SAMPLE_CALLCHAIN_EARLY))
return __bpf_get_stack(regs, NULL, NULL, buf, size, flags);
if (unlikely(flags & ~(BPF_F_SKIP_FIELD_MASK | BPF_F_USER_STACK |
BPF_F_USER_BUILD_ID)))
goto clear;
user = flags & BPF_F_USER_STACK;
kernel = !user;
err = -EFAULT;
trace = ctx->data->callchain;
if (unlikely(!trace))
goto clear;
nr_kernel = count_kernel_ip(trace);
if (kernel) {
__u64 nr = trace->nr;
trace->nr = nr_kernel;
err = __bpf_get_stack(regs, NULL, trace, buf, size, flags);
/* restore nr */
trace->nr = nr;
} else { /* user */
u64 skip = flags & BPF_F_SKIP_FIELD_MASK;
skip += nr_kernel;
if (skip > BPF_F_SKIP_FIELD_MASK)
goto clear;
flags = (flags & ~BPF_F_SKIP_FIELD_MASK) | skip;
err = __bpf_get_stack(regs, NULL, trace, buf, size, flags);
}
return err;
clear:
memset(buf, 0, size);
return err;
}
const struct bpf_func_proto bpf_get_stack_proto_pe = {
.func = bpf_get_stack_pe,
.gpl_only = true,
.ret_type = RET_INTEGER,
.arg1_type = ARG_PTR_TO_CTX,
.arg2_type = ARG_PTR_TO_UNINIT_MEM,
.arg3_type = ARG_CONST_SIZE_OR_ZERO,
.arg4_type = ARG_ANYTHING,
};
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 08:57:17 +03:00
/* Called from eBPF program */
static void *stack_map_lookup_elem(struct bpf_map *map, void *key)
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 08:57:17 +03:00
{
return ERR_PTR(-EOPNOTSUPP);
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 08:57:17 +03:00
}
/* Called from syscall */
int bpf_stackmap_copy(struct bpf_map *map, void *key, void *value)
{
struct bpf_stack_map *smap = container_of(map, struct bpf_stack_map, map);
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 08:57:17 +03:00
struct stack_map_bucket *bucket, *old_bucket;
u32 id = *(u32 *)key, trace_len;
if (unlikely(id >= smap->n_buckets))
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 08:57:17 +03:00
return -ENOENT;
bucket = xchg(&smap->buckets[id], NULL);
if (!bucket)
return -ENOENT;
bpf: extend stackmap to save binary_build_id+offset instead of address Currently, bpf stackmap store address for each entry in the call trace. To map these addresses to user space files, it is necessary to maintain the mapping from these virtual address to symbols in the binary. Usually, the user space profiler (such as perf) has to scan /proc/pid/maps at the beginning of profiling, and monitor mmap2() calls afterwards. Given the cost of maintaining the address map, this solution is not practical for system wide profiling that is always on. This patch tries to solve this problem with a variation of stackmap. This variation is enabled by flag BPF_F_STACK_BUILD_ID. Instead of storing addresses, the variation stores ELF file build_id + offset. Build ID is a 20-byte unique identifier for ELF files. The following command shows the Build ID of /bin/bash: [user@]$ readelf -n /bin/bash ... Build ID: XXXXXXXXXX ... With BPF_F_STACK_BUILD_ID, bpf_get_stackid() tries to parse Build ID for each entry in the call trace, and translate it into the following struct: struct bpf_stack_build_id_offset { __s32 status; unsigned char build_id[BPF_BUILD_ID_SIZE]; union { __u64 offset; __u64 ip; }; }; The search of build_id is limited to the first page of the file, and this page should be in page cache. Otherwise, we fallback to store ip for this entry (ip field in struct bpf_stack_build_id_offset). This requires the build_id to be stored in the first page. A quick survey of binary and dynamic library files in a few different systems shows that almost all binary and dynamic library files have build_id in the first page. Build_id is only meaningful for user stack. If a kernel stack is added to a stackmap with BPF_F_STACK_BUILD_ID, it will automatically fallback to only store ip (status == BPF_STACK_BUILD_ID_IP). Similarly, if build_id lookup failed for some reason, it will also fallback to store ip. User space can access struct bpf_stack_build_id_offset with bpf syscall BPF_MAP_LOOKUP_ELEM. It is necessary for user space to maintain mapping from build id to binary files. This mostly static mapping is much easier to maintain than per process address maps. Note: Stackmap with build_id only works in non-nmi context at this time. This is because we need to take mm->mmap_sem for find_vma(). If this changes, we would like to allow build_id lookup in nmi context. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-14 20:23:21 +03:00
trace_len = bucket->nr * stack_map_data_size(map);
memcpy(value, bucket->data, trace_len);
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 08:57:17 +03:00
memset(value + trace_len, 0, map->value_size - trace_len);
old_bucket = xchg(&smap->buckets[id], bucket);
if (old_bucket)
pcpu_freelist_push(&smap->freelist, &old_bucket->fnode);
return 0;
}
static int stack_map_get_next_key(struct bpf_map *map, void *key,
void *next_key)
{
struct bpf_stack_map *smap = container_of(map,
struct bpf_stack_map, map);
u32 id;
WARN_ON_ONCE(!rcu_read_lock_held());
if (!key) {
id = 0;
} else {
id = *(u32 *)key;
if (id >= smap->n_buckets || !smap->buckets[id])
id = 0;
else
id++;
}
while (id < smap->n_buckets && !smap->buckets[id])
id++;
if (id >= smap->n_buckets)
return -ENOENT;
*(u32 *)next_key = id;
return 0;
}
static int stack_map_update_elem(struct bpf_map *map, void *key, void *value,
u64 map_flags)
{
return -EINVAL;
}
/* Called from syscall or from eBPF program */
static int stack_map_delete_elem(struct bpf_map *map, void *key)
{
struct bpf_stack_map *smap = container_of(map, struct bpf_stack_map, map);
struct stack_map_bucket *old_bucket;
u32 id = *(u32 *)key;
if (unlikely(id >= smap->n_buckets))
return -E2BIG;
old_bucket = xchg(&smap->buckets[id], NULL);
if (old_bucket) {
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 08:57:17 +03:00
pcpu_freelist_push(&smap->freelist, &old_bucket->fnode);
return 0;
} else {
return -ENOENT;
}
}
/* Called when map->refcnt goes to zero, either from workqueue or from syscall */
static void stack_map_free(struct bpf_map *map)
{
struct bpf_stack_map *smap = container_of(map, struct bpf_stack_map, map);
bpf_map_area_free(smap->elems);
bpf: convert stackmap to pre-allocation It was observed that calling bpf_get_stackid() from a kprobe inside slub or from spin_unlock causes similar deadlock as with hashmap, therefore convert stackmap to use pre-allocated memory. The call_rcu is no longer feasible mechanism, since delayed freeing causes bpf_get_stackid() to fail unpredictably when number of actual stacks is significantly less than user requested max_entries. Since elements are no longer freed into slub, we can push elements into freelist immediately and let them be recycled. However the very unlikley race between user space map_lookup() and program-side recycling is possible: cpu0 cpu1 ---- ---- user does lookup(stackidX) starts copying ips into buffer delete(stackidX) calls bpf_get_stackid() which recyles the element and overwrites with new stack trace To avoid user space seeing a partial stack trace consisting of two merged stack traces, do bucket = xchg(, NULL); copy; xchg(,bucket); to preserve consistent stack trace delivery to user space. Now we can move memset(,0) of left-over element value from critical path of bpf_get_stackid() into slow-path of user space lookup. Also disallow lookup() from bpf program, since it's useless and program shouldn't be messing with collected stack trace. Note that similar race between user space lookup and kernel side updates is also present in hashmap, but it's not a new race. bpf programs were always allowed to modify hash and array map elements while user space is copying them. Fixes: d5a3b1f69186 ("bpf: introduce BPF_MAP_TYPE_STACK_TRACE") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 08:57:17 +03:00
pcpu_freelist_destroy(&smap->freelist);
bpf_map_area_free(smap);
put_callchain_buffers();
}
static int stack_trace_map_btf_id;
const struct bpf_map_ops stack_trace_map_ops = {
bpf: Add map_meta_equal map ops Some properties of the inner map is used in the verification time. When an inner map is inserted to an outer map at runtime, bpf_map_meta_equal() is currently used to ensure those properties of the inserting inner map stays the same as the verification time. In particular, the current bpf_map_meta_equal() checks max_entries which turns out to be too restrictive for most of the maps which do not use max_entries during the verification time. It limits the use case that wants to replace a smaller inner map with a larger inner map. There are some maps do use max_entries during verification though. For example, the map_gen_lookup in array_map_ops uses the max_entries to generate the inline lookup code. To accommodate differences between maps, the map_meta_equal is added to bpf_map_ops. Each map-type can decide what to check when its map is used as an inner map during runtime. Also, some map types cannot be used as an inner map and they are currently black listed in bpf_map_meta_alloc() in map_in_map.c. It is not unusual that the new map types may not aware that such blacklist exists. This patch enforces an explicit opt-in and only allows a map to be used as an inner map if it has implemented the map_meta_equal ops. It is based on the discussion in [1]. All maps that support inner map has its map_meta_equal points to bpf_map_meta_equal in this patch. A later patch will relax the max_entries check for most maps. bpf_types.h counts 28 map types. This patch adds 23 ".map_meta_equal" by using coccinelle. -5 for BPF_MAP_TYPE_PROG_ARRAY BPF_MAP_TYPE_(PERCPU)_CGROUP_STORAGE BPF_MAP_TYPE_STRUCT_OPS BPF_MAP_TYPE_ARRAY_OF_MAPS BPF_MAP_TYPE_HASH_OF_MAPS The "if (inner_map->inner_map_meta)" check in bpf_map_meta_alloc() is moved such that the same error is returned. [1]: https://lore.kernel.org/bpf/20200522022342.899756-1-kafai@fb.com/ Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200828011806.1970400-1-kafai@fb.com
2020-08-28 04:18:06 +03:00
.map_meta_equal = bpf_map_meta_equal,
.map_alloc = stack_map_alloc,
.map_free = stack_map_free,
.map_get_next_key = stack_map_get_next_key,
.map_lookup_elem = stack_map_lookup_elem,
.map_update_elem = stack_map_update_elem,
.map_delete_elem = stack_map_delete_elem,
.map_check_btf = map_check_no_btf,
.map_btf_name = "bpf_stack_map",
.map_btf_id = &stack_trace_map_btf_id,
};
static int __init stack_map_init(void)
{
int cpu;
struct stack_map_irq_work *work;
for_each_possible_cpu(cpu) {
work = per_cpu_ptr(&up_read_work, cpu);
init_irq_work(&work->irq_work, do_up_read);
}
return 0;
}
subsys_initcall(stack_map_init);