WSL2-Linux-Kernel/drivers/rtc/rtc-sun6i.c

763 строки
20 KiB
C
Исходник Обычный вид История

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 09:55:06 +03:00
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* An RTC driver for Allwinner A31/A23
*
* Copyright (c) 2014, Chen-Yu Tsai <wens@csie.org>
*
* based on rtc-sunxi.c
*
* An RTC driver for Allwinner A10/A20
*
* Copyright (c) 2013, Carlo Caione <carlo.caione@gmail.com>
*/
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/rtc.h>
#include <linux/slab.h>
#include <linux/types.h>
/* Control register */
#define SUN6I_LOSC_CTRL 0x0000
#define SUN6I_LOSC_CTRL_KEY (0x16aa << 16)
#define SUN6I_LOSC_CTRL_AUTO_SWT_BYPASS BIT(15)
#define SUN6I_LOSC_CTRL_ALM_DHMS_ACC BIT(9)
#define SUN6I_LOSC_CTRL_RTC_HMS_ACC BIT(8)
#define SUN6I_LOSC_CTRL_RTC_YMD_ACC BIT(7)
#define SUN6I_LOSC_CTRL_EXT_LOSC_EN BIT(4)
#define SUN6I_LOSC_CTRL_EXT_OSC BIT(0)
#define SUN6I_LOSC_CTRL_ACC_MASK GENMASK(9, 7)
#define SUN6I_LOSC_CLK_PRESCAL 0x0008
/* RTC */
#define SUN6I_RTC_YMD 0x0010
#define SUN6I_RTC_HMS 0x0014
/* Alarm 0 (counter) */
#define SUN6I_ALRM_COUNTER 0x0020
#define SUN6I_ALRM_CUR_VAL 0x0024
#define SUN6I_ALRM_EN 0x0028
#define SUN6I_ALRM_EN_CNT_EN BIT(0)
#define SUN6I_ALRM_IRQ_EN 0x002c
#define SUN6I_ALRM_IRQ_EN_CNT_IRQ_EN BIT(0)
#define SUN6I_ALRM_IRQ_STA 0x0030
#define SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND BIT(0)
/* Alarm 1 (wall clock) */
#define SUN6I_ALRM1_EN 0x0044
#define SUN6I_ALRM1_IRQ_EN 0x0048
#define SUN6I_ALRM1_IRQ_STA 0x004c
#define SUN6I_ALRM1_IRQ_STA_WEEK_IRQ_PEND BIT(0)
/* Alarm config */
#define SUN6I_ALARM_CONFIG 0x0050
#define SUN6I_ALARM_CONFIG_WAKEUP BIT(0)
#define SUN6I_LOSC_OUT_GATING 0x0060
#define SUN6I_LOSC_OUT_GATING_EN_OFFSET 0
/*
* Get date values
*/
#define SUN6I_DATE_GET_DAY_VALUE(x) ((x) & 0x0000001f)
#define SUN6I_DATE_GET_MON_VALUE(x) (((x) & 0x00000f00) >> 8)
#define SUN6I_DATE_GET_YEAR_VALUE(x) (((x) & 0x003f0000) >> 16)
#define SUN6I_LEAP_GET_VALUE(x) (((x) & 0x00400000) >> 22)
/*
* Get time values
*/
#define SUN6I_TIME_GET_SEC_VALUE(x) ((x) & 0x0000003f)
#define SUN6I_TIME_GET_MIN_VALUE(x) (((x) & 0x00003f00) >> 8)
#define SUN6I_TIME_GET_HOUR_VALUE(x) (((x) & 0x001f0000) >> 16)
/*
* Set date values
*/
#define SUN6I_DATE_SET_DAY_VALUE(x) ((x) & 0x0000001f)
#define SUN6I_DATE_SET_MON_VALUE(x) ((x) << 8 & 0x00000f00)
#define SUN6I_DATE_SET_YEAR_VALUE(x) ((x) << 16 & 0x003f0000)
#define SUN6I_LEAP_SET_VALUE(x) ((x) << 22 & 0x00400000)
/*
* Set time values
*/
#define SUN6I_TIME_SET_SEC_VALUE(x) ((x) & 0x0000003f)
#define SUN6I_TIME_SET_MIN_VALUE(x) ((x) << 8 & 0x00003f00)
#define SUN6I_TIME_SET_HOUR_VALUE(x) ((x) << 16 & 0x001f0000)
/*
* The year parameter passed to the driver is usually an offset relative to
* the year 1900. This macro is used to convert this offset to another one
* relative to the minimum year allowed by the hardware.
*
* The year range is 1970 - 2033. This range is selected to match Allwinner's
* driver, even though it is somewhat limited.
*/
#define SUN6I_YEAR_MIN 1970
#define SUN6I_YEAR_OFF (SUN6I_YEAR_MIN - 1900)
/*
* There are other differences between models, including:
*
* - number of GPIO pins that can be configured to hold a certain level
* - crypto-key related registers (H5, H6)
* - boot process related (super standby, secondary processor entry address)
* registers (R40, H6)
* - SYS power domain controls (R40)
* - DCXO controls (H6)
* - RC oscillator calibration (H6)
*
* These functions are not covered by this driver.
*/
struct sun6i_rtc_clk_data {
unsigned long rc_osc_rate;
unsigned int fixed_prescaler : 16;
unsigned int has_prescaler : 1;
unsigned int has_out_clk : 1;
unsigned int export_iosc : 1;
unsigned int has_losc_en : 1;
unsigned int has_auto_swt : 1;
};
struct sun6i_rtc_dev {
struct rtc_device *rtc;
const struct sun6i_rtc_clk_data *data;
void __iomem *base;
int irq;
unsigned long alarm;
struct clk_hw hw;
struct clk_hw *int_osc;
struct clk *losc;
struct clk *ext_losc;
spinlock_t lock;
};
static struct sun6i_rtc_dev *sun6i_rtc;
static unsigned long sun6i_rtc_osc_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct sun6i_rtc_dev *rtc = container_of(hw, struct sun6i_rtc_dev, hw);
u32 val = 0;
val = readl(rtc->base + SUN6I_LOSC_CTRL);
if (val & SUN6I_LOSC_CTRL_EXT_OSC)
return parent_rate;
if (rtc->data->fixed_prescaler)
parent_rate /= rtc->data->fixed_prescaler;
if (rtc->data->has_prescaler) {
val = readl(rtc->base + SUN6I_LOSC_CLK_PRESCAL);
val &= GENMASK(4, 0);
}
return parent_rate / (val + 1);
}
static u8 sun6i_rtc_osc_get_parent(struct clk_hw *hw)
{
struct sun6i_rtc_dev *rtc = container_of(hw, struct sun6i_rtc_dev, hw);
return readl(rtc->base + SUN6I_LOSC_CTRL) & SUN6I_LOSC_CTRL_EXT_OSC;
}
static int sun6i_rtc_osc_set_parent(struct clk_hw *hw, u8 index)
{
struct sun6i_rtc_dev *rtc = container_of(hw, struct sun6i_rtc_dev, hw);
unsigned long flags;
u32 val;
if (index > 1)
return -EINVAL;
spin_lock_irqsave(&rtc->lock, flags);
val = readl(rtc->base + SUN6I_LOSC_CTRL);
val &= ~SUN6I_LOSC_CTRL_EXT_OSC;
val |= SUN6I_LOSC_CTRL_KEY;
val |= index ? SUN6I_LOSC_CTRL_EXT_OSC : 0;
if (rtc->data->has_losc_en) {
val &= ~SUN6I_LOSC_CTRL_EXT_LOSC_EN;
val |= index ? SUN6I_LOSC_CTRL_EXT_LOSC_EN : 0;
}
writel(val, rtc->base + SUN6I_LOSC_CTRL);
spin_unlock_irqrestore(&rtc->lock, flags);
return 0;
}
static const struct clk_ops sun6i_rtc_osc_ops = {
.recalc_rate = sun6i_rtc_osc_recalc_rate,
.get_parent = sun6i_rtc_osc_get_parent,
.set_parent = sun6i_rtc_osc_set_parent,
};
static void __init sun6i_rtc_clk_init(struct device_node *node,
const struct sun6i_rtc_clk_data *data)
{
struct clk_hw_onecell_data *clk_data;
struct sun6i_rtc_dev *rtc;
struct clk_init_data init = {
.ops = &sun6i_rtc_osc_ops,
.name = "losc",
};
const char *iosc_name = "rtc-int-osc";
const char *clkout_name = "osc32k-out";
const char *parents[2];
u32 reg;
rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
if (!rtc)
return;
rtc->data = data;
clk_data = kzalloc(struct_size(clk_data, hws, 3), GFP_KERNEL);
if (!clk_data) {
kfree(rtc);
return;
}
spin_lock_init(&rtc->lock);
rtc->base = of_io_request_and_map(node, 0, of_node_full_name(node));
if (IS_ERR(rtc->base)) {
pr_crit("Can't map RTC registers");
goto err;
}
reg = SUN6I_LOSC_CTRL_KEY;
if (rtc->data->has_auto_swt) {
/* Bypass auto-switch to int osc, on ext losc failure */
reg |= SUN6I_LOSC_CTRL_AUTO_SWT_BYPASS;
writel(reg, rtc->base + SUN6I_LOSC_CTRL);
}
/* Switch to the external, more precise, oscillator, if present */
if (of_get_property(node, "clocks", NULL)) {
reg |= SUN6I_LOSC_CTRL_EXT_OSC;
if (rtc->data->has_losc_en)
reg |= SUN6I_LOSC_CTRL_EXT_LOSC_EN;
}
writel(reg, rtc->base + SUN6I_LOSC_CTRL);
/* Yes, I know, this is ugly. */
sun6i_rtc = rtc;
/* Only read IOSC name from device tree if it is exported */
if (rtc->data->export_iosc)
of_property_read_string_index(node, "clock-output-names", 2,
&iosc_name);
rtc->int_osc = clk_hw_register_fixed_rate_with_accuracy(NULL,
iosc_name,
NULL, 0,
rtc->data->rc_osc_rate,
300000000);
if (IS_ERR(rtc->int_osc)) {
pr_crit("Couldn't register the internal oscillator\n");
return;
}
parents[0] = clk_hw_get_name(rtc->int_osc);
/* If there is no external oscillator, this will be NULL and ... */
parents[1] = of_clk_get_parent_name(node, 0);
rtc->hw.init = &init;
init.parent_names = parents;
/* ... number of clock parents will be 1. */
init.num_parents = of_clk_get_parent_count(node) + 1;
of_property_read_string_index(node, "clock-output-names", 0,
&init.name);
rtc->losc = clk_register(NULL, &rtc->hw);
if (IS_ERR(rtc->losc)) {
pr_crit("Couldn't register the LOSC clock\n");
return;
}
of_property_read_string_index(node, "clock-output-names", 1,
&clkout_name);
rtc->ext_losc = clk_register_gate(NULL, clkout_name, init.name,
0, rtc->base + SUN6I_LOSC_OUT_GATING,
SUN6I_LOSC_OUT_GATING_EN_OFFSET, 0,
&rtc->lock);
if (IS_ERR(rtc->ext_losc)) {
pr_crit("Couldn't register the LOSC external gate\n");
return;
}
clk_data->num = 2;
clk_data->hws[0] = &rtc->hw;
clk_data->hws[1] = __clk_get_hw(rtc->ext_losc);
if (rtc->data->export_iosc) {
clk_data->hws[2] = rtc->int_osc;
clk_data->num = 3;
}
of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
return;
err:
kfree(clk_data);
}
static const struct sun6i_rtc_clk_data sun6i_a31_rtc_data = {
.rc_osc_rate = 667000, /* datasheet says 600 ~ 700 KHz */
.has_prescaler = 1,
};
static void __init sun6i_a31_rtc_clk_init(struct device_node *node)
{
sun6i_rtc_clk_init(node, &sun6i_a31_rtc_data);
}
CLK_OF_DECLARE_DRIVER(sun6i_a31_rtc_clk, "allwinner,sun6i-a31-rtc",
sun6i_a31_rtc_clk_init);
static const struct sun6i_rtc_clk_data sun8i_a23_rtc_data = {
.rc_osc_rate = 667000, /* datasheet says 600 ~ 700 KHz */
.has_prescaler = 1,
.has_out_clk = 1,
};
static void __init sun8i_a23_rtc_clk_init(struct device_node *node)
{
sun6i_rtc_clk_init(node, &sun8i_a23_rtc_data);
}
CLK_OF_DECLARE_DRIVER(sun8i_a23_rtc_clk, "allwinner,sun8i-a23-rtc",
sun8i_a23_rtc_clk_init);
static const struct sun6i_rtc_clk_data sun8i_h3_rtc_data = {
.rc_osc_rate = 16000000,
.fixed_prescaler = 32,
.has_prescaler = 1,
.has_out_clk = 1,
.export_iosc = 1,
};
static void __init sun8i_h3_rtc_clk_init(struct device_node *node)
{
sun6i_rtc_clk_init(node, &sun8i_h3_rtc_data);
}
CLK_OF_DECLARE_DRIVER(sun8i_h3_rtc_clk, "allwinner,sun8i-h3-rtc",
sun8i_h3_rtc_clk_init);
/* As far as we are concerned, clocks for H5 are the same as H3 */
CLK_OF_DECLARE_DRIVER(sun50i_h5_rtc_clk, "allwinner,sun50i-h5-rtc",
sun8i_h3_rtc_clk_init);
static const struct sun6i_rtc_clk_data sun50i_h6_rtc_data = {
.rc_osc_rate = 16000000,
.fixed_prescaler = 32,
.has_prescaler = 1,
.has_out_clk = 1,
.export_iosc = 1,
.has_losc_en = 1,
.has_auto_swt = 1,
};
static void __init sun50i_h6_rtc_clk_init(struct device_node *node)
{
sun6i_rtc_clk_init(node, &sun50i_h6_rtc_data);
}
CLK_OF_DECLARE_DRIVER(sun50i_h6_rtc_clk, "allwinner,sun50i-h6-rtc",
sun50i_h6_rtc_clk_init);
/*
* The R40 user manual is self-conflicting on whether the prescaler is
* fixed or configurable. The clock diagram shows it as fixed, but there
* is also a configurable divider in the RTC block.
*/
static const struct sun6i_rtc_clk_data sun8i_r40_rtc_data = {
.rc_osc_rate = 16000000,
.fixed_prescaler = 512,
};
static void __init sun8i_r40_rtc_clk_init(struct device_node *node)
{
sun6i_rtc_clk_init(node, &sun8i_r40_rtc_data);
}
CLK_OF_DECLARE_DRIVER(sun8i_r40_rtc_clk, "allwinner,sun8i-r40-rtc",
sun8i_r40_rtc_clk_init);
static const struct sun6i_rtc_clk_data sun8i_v3_rtc_data = {
.rc_osc_rate = 32000,
.has_out_clk = 1,
};
static void __init sun8i_v3_rtc_clk_init(struct device_node *node)
{
sun6i_rtc_clk_init(node, &sun8i_v3_rtc_data);
}
CLK_OF_DECLARE_DRIVER(sun8i_v3_rtc_clk, "allwinner,sun8i-v3-rtc",
sun8i_v3_rtc_clk_init);
static irqreturn_t sun6i_rtc_alarmirq(int irq, void *id)
{
struct sun6i_rtc_dev *chip = (struct sun6i_rtc_dev *) id;
irqreturn_t ret = IRQ_NONE;
u32 val;
spin_lock(&chip->lock);
val = readl(chip->base + SUN6I_ALRM_IRQ_STA);
if (val & SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND) {
val |= SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND;
writel(val, chip->base + SUN6I_ALRM_IRQ_STA);
rtc_update_irq(chip->rtc, 1, RTC_AF | RTC_IRQF);
ret = IRQ_HANDLED;
}
spin_unlock(&chip->lock);
return ret;
}
static void sun6i_rtc_setaie(int to, struct sun6i_rtc_dev *chip)
{
u32 alrm_val = 0;
u32 alrm_irq_val = 0;
u32 alrm_wake_val = 0;
unsigned long flags;
if (to) {
alrm_val = SUN6I_ALRM_EN_CNT_EN;
alrm_irq_val = SUN6I_ALRM_IRQ_EN_CNT_IRQ_EN;
alrm_wake_val = SUN6I_ALARM_CONFIG_WAKEUP;
} else {
writel(SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND,
chip->base + SUN6I_ALRM_IRQ_STA);
}
spin_lock_irqsave(&chip->lock, flags);
writel(alrm_val, chip->base + SUN6I_ALRM_EN);
writel(alrm_irq_val, chip->base + SUN6I_ALRM_IRQ_EN);
writel(alrm_wake_val, chip->base + SUN6I_ALARM_CONFIG);
spin_unlock_irqrestore(&chip->lock, flags);
}
static int sun6i_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
{
struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
u32 date, time;
/*
* read again in case it changes
*/
do {
date = readl(chip->base + SUN6I_RTC_YMD);
time = readl(chip->base + SUN6I_RTC_HMS);
} while ((date != readl(chip->base + SUN6I_RTC_YMD)) ||
(time != readl(chip->base + SUN6I_RTC_HMS)));
rtc_tm->tm_sec = SUN6I_TIME_GET_SEC_VALUE(time);
rtc_tm->tm_min = SUN6I_TIME_GET_MIN_VALUE(time);
rtc_tm->tm_hour = SUN6I_TIME_GET_HOUR_VALUE(time);
rtc_tm->tm_mday = SUN6I_DATE_GET_DAY_VALUE(date);
rtc_tm->tm_mon = SUN6I_DATE_GET_MON_VALUE(date);
rtc_tm->tm_year = SUN6I_DATE_GET_YEAR_VALUE(date);
rtc_tm->tm_mon -= 1;
/*
* switch from (data_year->min)-relative offset to
* a (1900)-relative one
*/
rtc_tm->tm_year += SUN6I_YEAR_OFF;
return 0;
}
static int sun6i_rtc_getalarm(struct device *dev, struct rtc_wkalrm *wkalrm)
{
struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
unsigned long flags;
u32 alrm_st;
u32 alrm_en;
spin_lock_irqsave(&chip->lock, flags);
alrm_en = readl(chip->base + SUN6I_ALRM_IRQ_EN);
alrm_st = readl(chip->base + SUN6I_ALRM_IRQ_STA);
spin_unlock_irqrestore(&chip->lock, flags);
wkalrm->enabled = !!(alrm_en & SUN6I_ALRM_EN_CNT_EN);
wkalrm->pending = !!(alrm_st & SUN6I_ALRM_EN_CNT_EN);
rtc_time64_to_tm(chip->alarm, &wkalrm->time);
return 0;
}
static int sun6i_rtc_setalarm(struct device *dev, struct rtc_wkalrm *wkalrm)
{
struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
struct rtc_time *alrm_tm = &wkalrm->time;
struct rtc_time tm_now;
unsigned long time_now = 0;
unsigned long time_set = 0;
unsigned long time_gap = 0;
int ret = 0;
ret = sun6i_rtc_gettime(dev, &tm_now);
if (ret < 0) {
dev_err(dev, "Error in getting time\n");
return -EINVAL;
}
time_set = rtc_tm_to_time64(alrm_tm);
time_now = rtc_tm_to_time64(&tm_now);
if (time_set <= time_now) {
dev_err(dev, "Date to set in the past\n");
return -EINVAL;
}
time_gap = time_set - time_now;
if (time_gap > U32_MAX) {
dev_err(dev, "Date too far in the future\n");
return -EINVAL;
}
sun6i_rtc_setaie(0, chip);
writel(0, chip->base + SUN6I_ALRM_COUNTER);
usleep_range(100, 300);
writel(time_gap, chip->base + SUN6I_ALRM_COUNTER);
chip->alarm = time_set;
sun6i_rtc_setaie(wkalrm->enabled, chip);
return 0;
}
static int sun6i_rtc_wait(struct sun6i_rtc_dev *chip, int offset,
unsigned int mask, unsigned int ms_timeout)
{
const unsigned long timeout = jiffies + msecs_to_jiffies(ms_timeout);
u32 reg;
do {
reg = readl(chip->base + offset);
reg &= mask;
if (!reg)
return 0;
} while (time_before(jiffies, timeout));
return -ETIMEDOUT;
}
static int sun6i_rtc_settime(struct device *dev, struct rtc_time *rtc_tm)
{
struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
u32 date = 0;
u32 time = 0;
rtc_tm->tm_year -= SUN6I_YEAR_OFF;
rtc_tm->tm_mon += 1;
date = SUN6I_DATE_SET_DAY_VALUE(rtc_tm->tm_mday) |
SUN6I_DATE_SET_MON_VALUE(rtc_tm->tm_mon) |
SUN6I_DATE_SET_YEAR_VALUE(rtc_tm->tm_year);
if (is_leap_year(rtc_tm->tm_year + SUN6I_YEAR_MIN))
date |= SUN6I_LEAP_SET_VALUE(1);
time = SUN6I_TIME_SET_SEC_VALUE(rtc_tm->tm_sec) |
SUN6I_TIME_SET_MIN_VALUE(rtc_tm->tm_min) |
SUN6I_TIME_SET_HOUR_VALUE(rtc_tm->tm_hour);
/* Check whether registers are writable */
if (sun6i_rtc_wait(chip, SUN6I_LOSC_CTRL,
SUN6I_LOSC_CTRL_ACC_MASK, 50)) {
dev_err(dev, "rtc is still busy.\n");
return -EBUSY;
}
writel(time, chip->base + SUN6I_RTC_HMS);
/*
* After writing the RTC HH-MM-SS register, the
* SUN6I_LOSC_CTRL_RTC_HMS_ACC bit is set and it will not
* be cleared until the real writing operation is finished
*/
if (sun6i_rtc_wait(chip, SUN6I_LOSC_CTRL,
SUN6I_LOSC_CTRL_RTC_HMS_ACC, 50)) {
dev_err(dev, "Failed to set rtc time.\n");
return -ETIMEDOUT;
}
writel(date, chip->base + SUN6I_RTC_YMD);
/*
* After writing the RTC YY-MM-DD register, the
* SUN6I_LOSC_CTRL_RTC_YMD_ACC bit is set and it will not
* be cleared until the real writing operation is finished
*/
if (sun6i_rtc_wait(chip, SUN6I_LOSC_CTRL,
SUN6I_LOSC_CTRL_RTC_YMD_ACC, 50)) {
dev_err(dev, "Failed to set rtc time.\n");
return -ETIMEDOUT;
}
return 0;
}
static int sun6i_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
if (!enabled)
sun6i_rtc_setaie(enabled, chip);
return 0;
}
static const struct rtc_class_ops sun6i_rtc_ops = {
.read_time = sun6i_rtc_gettime,
.set_time = sun6i_rtc_settime,
.read_alarm = sun6i_rtc_getalarm,
.set_alarm = sun6i_rtc_setalarm,
.alarm_irq_enable = sun6i_rtc_alarm_irq_enable
};
rtc: sun6i: Allow using as wakeup source from suspend This patch allows userspace to set up wakeup alarms on any RTC handled by the sun6i driver, and adds the necessary PM operations to allow resuming from suspend when the configured wakeup alarm fires a IRQ. Of course, that the device actually resumes depends on the suspend state and how a particular hardware reacts to it, but that is out of scope for this patch. I've tested these changes on a Pine H64 model B, which contains a Allwinner H6 SoC, with the help of CONFIG_PM_TEST_SUSPEND kernel option. These are the interesting outputs from the kernel and commands which show that it works. As every RTC handled by this driver is largely the same, I think that it shouldn't introduce any regression on other SoCs, but I may be wrong. [ 1.092705] PM: test RTC wakeup from 'freeze' suspend [ 1.098230] PM: suspend entry (s2idle) [ 1.212907] PM: suspend devices took 0.080 seconds (The SoC freezes for some seconds) [ 3.197604] PM: resume devices took 0.104 seconds [ 3.215937] PM: suspend exit [ 1.092812] PM: test RTC wakeup from 'mem' suspend [ 1.098089] PM: suspend entry (deep) [ 1.102033] PM: suspend exit [ 1.105205] PM: suspend test failed, error -22 In any case, the RTC alarm interrupt gets fired as exptected: $ echo +5 > /sys/class/rtc/rtc0/wakealarm && sleep 5 && grep rtc /proc/interrupts 29: 1 0 0 0 GICv2 133 Level 7000000.rtc Signed-off-by: Alejandro González <alejandro.gonzalez.correo@gmail.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20190821210056.11995-1-alejandro.gonzalez.correo@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-22 00:00:56 +03:00
#ifdef CONFIG_PM_SLEEP
/* Enable IRQ wake on suspend, to wake up from RTC. */
static int sun6i_rtc_suspend(struct device *dev)
{
struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
if (device_may_wakeup(dev))
enable_irq_wake(chip->irq);
return 0;
}
/* Disable IRQ wake on resume. */
static int sun6i_rtc_resume(struct device *dev)
{
struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
if (device_may_wakeup(dev))
disable_irq_wake(chip->irq);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(sun6i_rtc_pm_ops,
sun6i_rtc_suspend, sun6i_rtc_resume);
static int sun6i_rtc_probe(struct platform_device *pdev)
{
struct sun6i_rtc_dev *chip = sun6i_rtc;
int ret;
if (!chip)
return -ENODEV;
platform_set_drvdata(pdev, chip);
chip->irq = platform_get_irq(pdev, 0);
if (chip->irq < 0)
return chip->irq;
ret = devm_request_irq(&pdev->dev, chip->irq, sun6i_rtc_alarmirq,
0, dev_name(&pdev->dev), chip);
if (ret) {
dev_err(&pdev->dev, "Could not request IRQ\n");
return ret;
}
/* clear the alarm counter value */
writel(0, chip->base + SUN6I_ALRM_COUNTER);
/* disable counter alarm */
writel(0, chip->base + SUN6I_ALRM_EN);
/* disable counter alarm interrupt */
writel(0, chip->base + SUN6I_ALRM_IRQ_EN);
/* disable week alarm */
writel(0, chip->base + SUN6I_ALRM1_EN);
/* disable week alarm interrupt */
writel(0, chip->base + SUN6I_ALRM1_IRQ_EN);
/* clear counter alarm pending interrupts */
writel(SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND,
chip->base + SUN6I_ALRM_IRQ_STA);
/* clear week alarm pending interrupts */
writel(SUN6I_ALRM1_IRQ_STA_WEEK_IRQ_PEND,
chip->base + SUN6I_ALRM1_IRQ_STA);
/* disable alarm wakeup */
writel(0, chip->base + SUN6I_ALARM_CONFIG);
clk_prepare_enable(chip->losc);
rtc: sun6i: Allow using as wakeup source from suspend This patch allows userspace to set up wakeup alarms on any RTC handled by the sun6i driver, and adds the necessary PM operations to allow resuming from suspend when the configured wakeup alarm fires a IRQ. Of course, that the device actually resumes depends on the suspend state and how a particular hardware reacts to it, but that is out of scope for this patch. I've tested these changes on a Pine H64 model B, which contains a Allwinner H6 SoC, with the help of CONFIG_PM_TEST_SUSPEND kernel option. These are the interesting outputs from the kernel and commands which show that it works. As every RTC handled by this driver is largely the same, I think that it shouldn't introduce any regression on other SoCs, but I may be wrong. [ 1.092705] PM: test RTC wakeup from 'freeze' suspend [ 1.098230] PM: suspend entry (s2idle) [ 1.212907] PM: suspend devices took 0.080 seconds (The SoC freezes for some seconds) [ 3.197604] PM: resume devices took 0.104 seconds [ 3.215937] PM: suspend exit [ 1.092812] PM: test RTC wakeup from 'mem' suspend [ 1.098089] PM: suspend entry (deep) [ 1.102033] PM: suspend exit [ 1.105205] PM: suspend test failed, error -22 In any case, the RTC alarm interrupt gets fired as exptected: $ echo +5 > /sys/class/rtc/rtc0/wakealarm && sleep 5 && grep rtc /proc/interrupts 29: 1 0 0 0 GICv2 133 Level 7000000.rtc Signed-off-by: Alejandro González <alejandro.gonzalez.correo@gmail.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20190821210056.11995-1-alejandro.gonzalez.correo@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-22 00:00:56 +03:00
device_init_wakeup(&pdev->dev, 1);
chip->rtc = devm_rtc_allocate_device(&pdev->dev);
if (IS_ERR(chip->rtc))
return PTR_ERR(chip->rtc);
chip->rtc->ops = &sun6i_rtc_ops;
chip->rtc->range_max = 2019686399LL; /* 2033-12-31 23:59:59 */
ret = rtc_register_device(chip->rtc);
if (ret)
return ret;
dev_info(&pdev->dev, "RTC enabled\n");
return 0;
}
/*
* As far as RTC functionality goes, all models are the same. The
* datasheets claim that different models have different number of
* registers available for non-volatile storage, but experiments show
* that all SoCs have 16 registers available for this purpose.
*/
static const struct of_device_id sun6i_rtc_dt_ids[] = {
{ .compatible = "allwinner,sun6i-a31-rtc" },
{ .compatible = "allwinner,sun8i-a23-rtc" },
{ .compatible = "allwinner,sun8i-h3-rtc" },
{ .compatible = "allwinner,sun8i-r40-rtc" },
{ .compatible = "allwinner,sun8i-v3-rtc" },
{ .compatible = "allwinner,sun50i-h5-rtc" },
{ .compatible = "allwinner,sun50i-h6-rtc" },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, sun6i_rtc_dt_ids);
static struct platform_driver sun6i_rtc_driver = {
.probe = sun6i_rtc_probe,
.driver = {
.name = "sun6i-rtc",
.of_match_table = sun6i_rtc_dt_ids,
rtc: sun6i: Allow using as wakeup source from suspend This patch allows userspace to set up wakeup alarms on any RTC handled by the sun6i driver, and adds the necessary PM operations to allow resuming from suspend when the configured wakeup alarm fires a IRQ. Of course, that the device actually resumes depends on the suspend state and how a particular hardware reacts to it, but that is out of scope for this patch. I've tested these changes on a Pine H64 model B, which contains a Allwinner H6 SoC, with the help of CONFIG_PM_TEST_SUSPEND kernel option. These are the interesting outputs from the kernel and commands which show that it works. As every RTC handled by this driver is largely the same, I think that it shouldn't introduce any regression on other SoCs, but I may be wrong. [ 1.092705] PM: test RTC wakeup from 'freeze' suspend [ 1.098230] PM: suspend entry (s2idle) [ 1.212907] PM: suspend devices took 0.080 seconds (The SoC freezes for some seconds) [ 3.197604] PM: resume devices took 0.104 seconds [ 3.215937] PM: suspend exit [ 1.092812] PM: test RTC wakeup from 'mem' suspend [ 1.098089] PM: suspend entry (deep) [ 1.102033] PM: suspend exit [ 1.105205] PM: suspend test failed, error -22 In any case, the RTC alarm interrupt gets fired as exptected: $ echo +5 > /sys/class/rtc/rtc0/wakealarm && sleep 5 && grep rtc /proc/interrupts 29: 1 0 0 0 GICv2 133 Level 7000000.rtc Signed-off-by: Alejandro González <alejandro.gonzalez.correo@gmail.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20190821210056.11995-1-alejandro.gonzalez.correo@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-22 00:00:56 +03:00
.pm = &sun6i_rtc_pm_ops,
},
};
builtin_platform_driver(sun6i_rtc_driver);